Doodle Labs RM-1700-22M Mesh Rider

Radio
Overview
The RM-1700-22M Mesh Rider Radio is an
advanced MANET data-link. The 915-MHz
and 2450-MHz bands are supported allowing
it to be used globally.

The RM-1700-22M employs Doodle Labs'

patented Mesh Rider® technology with
state-of-the-art RF and networking
capabilities that enable communication
further, faster, and more reliably than any
comparable solution on the market. For example, optimized video streaming carries
crystal clear 4K video while simultaneously carrying low latency command and control
data.

The interoperable Mesh Rider Radio platform is available in many frequency bands
between 600 MHz and 6 GHz in Nano, Mini, OEM, Embedded, Wearable and External form
factors. This exibility allows customers to use their industry speci c frequency bands for
deploying private wireless networks that encompass all the use cases for human and
machine collaboration.

For more information, please visit: https://doodlelabs.com/smart-radio/

Frequency Bands
Band Frequency Range

915-MHz 902-MHz to 928 MHz

Global ISM Band

2450-MHz 2400-MHz to 2482 MHz

Global ISM Band

Key Features - Mesh Rider Radio Platform

PERFORMANCE RF
Long range ( eld tested >100km) and Convolutional coding, Forward Error
high throughput (up to 100 Mbps) Mesh Correction (FEC), ACK-retransmits, Maximal
Rider waveform Ratio Combining, Spatial Multiplexing, and
Interference resistant COFDM for robust Space Time Block Coding for robust data
link quality in di cult RF environments transmission over noisy channel/spectrum
Exceptional Multipath and NrLOS MIMO Single channel, Time Division Duplexing
performance (TDD) for bi-directional tra c
Adaptive radio modulations from BPSK Resistant to high-power jamming signals
up to 64QAM, with fast per packet ATPC for widely dispersed mesh
optimization to maximize link performance network
in dynamic environments Built-in Spectrum Scanner to help
Software de ned channel bandwidth for mitigate interference issues
e cient re-use of spectrum

PERFORMANCE NETWORKING
Ultra-Reliable Low Latency Channel FIPS Certi ed AES 256- and 128-bit
(URLLC) for Command and Control encryption
Optimized video streaming channel for End-to-end IP architecture with Ad Hoc,
Unicast and Multicast transport WDS transparent bridge, Client, AP, and
Self-healing/self-forming multi- Internet Gateway operating modes
frequency mobile mesh for highly reliable Embedded network management APIs
network with redundancy
ADDITIONAL FEATURES
Very small size, weight, and power for Rugged, vibration resistant construction
mobile applications to meet MIL-specs
Ethernet, USB, and UART interfaces to MIL-spec temp range (-40C to +85C)
allow easy integration into di erent system High quality, manufactured in ISO 9001
architectures and ISO 14001 certi ed facilities
Leverage the bene ts of the most COTS – Commercial o the Shelf
extensible OpenWrt ecosystem and install Extended lifespan and availability
3rd party IoT applications

System Integration
The Mesh Rider Radio has been designed to
be plug and play. Only USB and a power
supply are required for integration.

Visit Doodle Labs Technical Library for

extensive design-in documents.
Technical Speci cations (915-MHz and 2450-MHz)
Model Category XTreme

ORDERING CODES

Radio Con guration 2x2 MIMO

Model # RM-1700-22M3

Antenna (Optional) ANT-1700-3-O

Evaluation Kit (Optional) EK-1700-22: 2x Multi-band Antenna, Breakout board,

Cables

Design-In Documentation Doodle Labs Technical Library

PERFORMANCE OVERVIEW

Data Throughput at 10- 80 Mbps (20 MHz Channel)

meter range with 40 Mbps (10 MHz Channel)
Attached 3 dBi Antennas 20 Mbps (5 MHz Channel)
(Indicative) 12 Mbps (3 MHz Channel)

Over the Air Data 128-bit AES (Full throughput)

Encryption 256-bit AES (12 Mbps max throughput)

FIPS Certi cation FIPS 140-3

(Optional)

Operating Modes Mesh, WDS AP, WDS Client

Bridged or Internet Gateway with NAT

Command & Control Ultra-Reliable Low Latency Channel (URLLC). Latency 1.5-
channel 10 ms

Video Channel Optimized video streaming with Unicast and Multicast

transmission

RF SPECIFICATIONS
Protocol Compatibility Fully compatible with Doodle Labs Mesh Rider Waveform

Frequency Range 915-MHz and 2450-MHz

Operating Bands 902-928 MHz

(Software Selectable) 2400-2482 MHz

Advanced Band Filters Dedicated SAW lters for each band for high
interference immunity

Max RF Power at SMA 1.0W (30 dBm) @ MCS 0,8

port (Software control) 0.8W (29 dBm) @ MCS 3,11
Each radio individually 0.5W (27 dBm) @ MCS 5,13
calibrated 250mW (24 dBm) @MCS 7,15

Channel Sizes 3, 5, 10, 20 MHz

(Software Selectable)

Radio Data Rate Auto adapting Modulation Coding Scheme (MCS0-15)

Antenna Signal Strength -30 to -90 dBm (Recommended), Absolute Maximum=

+12 dBm

Receiver LNA Gain 15 dB

RF Power Control In 1 dBm steps, Tolerance ±1 dBm

Automatic Transmit Intelligently adjusts the transmit power for very close
Power Control (ATPC) range operation

Integrated Antenna Port Able to withstand open port, >10 KV (contact) and >15KV
Protection (open air discharge) as per IEC-61000-4-2

Wireless Error Correction FEC, ARQ

Receive Noise Figure +4 dB

Receive Adjacent Channel 34 dB @ MCS0 for 20 MHz channel (Typ)

Rejection (ACRR)
Transmitter Adjacent < 28 dBr (Fc ± ChBW)
Channel Leakage Ratio
(ACLR)

Transmitter Spurious < 40 dBc

Emission Suppression

Frequency Accuracy ±10 ppm max over life

NETWORKING SPECIFICATIONS

Mesh Router Self-Forming/Self-Healing, Peer to Peer

Custom Software Package Image Builder, OPKG, ipk

Manager

Radio Management Web GUI (HTTPs), SSH and JSON-RPC

Access control Password, MAC, IP, Port ltering

Supported Protocols IPv6, QoS, DNS, HTTPS, IP, ICMP, NTP, DHCP

Software Upgrade Over the air software upgrade supported

HARDWARE SPECIFICATIONS

Power Input 5V ± 5%

DC Power Consumption 915-MHz:

Average 7W (50% Tx/Rx duty cycle), 10W Peak Tx power
@ max range, 4.5W Rx mode

2450-MHz:
Average 5W (50% Tx/Rx duty cycle), 8W Peak Tx power @
max range, 2W Rx mode

Dimensions Baseband: 47 x 28 x 5 mm
RF Board: 46 x 51 x 6.5 mm
36.5 grams

Mesh Rider Antenna Ports 2x MMCX-Female Connector

Host Interface Ethernet (100 Base-T), 1x USB -Dev (Ethernet over USB
only), 1x UART (3.3V), 1x USB-H, 3x GPIO

Temperature range Industrial: -40°C to +85°C

(Operating) * System's thermal design should ensure that the radio's
case temperature is maintained within these speci cations.

Temperature range (Non- -40°C to +100°C

Operating)

Ingress Protection IP 50, Dust Protected, No Liquid protection

Relative Humidity 5% to 95% noncondensing

Shock and Vibration Compliant to MIL-STD-810H for high shock and vibration
Resistance

Reliability Extreme Reliability, IPC Class 2 standard with Class 3

options

Integrated CPU MIPS 24Kc, 540 MHz, 32MB Flash, 64MB DDR2 RAM

ESD Protection IEC 61000-4-2 test criteria, Level 3 (±6KV) for Contact
Discharge and Level 4 (±15KV) for Air Discharge

MTBF >235k hours (25 years)

Life Cycle Planning Extended lifespan with 7 years guaranteed availability

REGULATORY INFORMATION

J/F-12 Certi cation N.A.

FCC ID 2AG87RM-2450 (in progress)

2AG87RM-915 (in progress)

Industry Canada (IC) 21411-RM2450 (in progress)

21411-RM915 (in progress)

CE Fully Certi ed (in progress)

Regulatory Requirements Designed and veri ed to meet various regulatory
requirements. Formal testing and approval are required
for the Integrator's antenna type. The Integrator is
responsible for obtaining all regulatory approvals in
target markets for the nished product.

RoHS/WEEE Compliance Yes. 100% Recyclable/Biodegradable packaging

EXPORT INFORMATION

ECCN Code 5A992

HS Code 85256010
 ADDITIONAL RF SPECIFICATIONS

MCS Modulation Combined Sensitivity UDP Throughput

Rate Output Power (dBm) (Mbps)
(dBm)

0 BPSK (1/2) 32 -93 5.4

1 QPSK (1/2) 29 -91 10.62

2 QPSK (3/4) 29 -89 15.66

3 16-QAM (1/2) 29 -87 20.52

4 16-QAM (3/4) 28 -83 29.88

5 64-QAM (2/3) 27 -79 38.88

6 64-QAM (3/4) 26 -77 43.11

7 64-QAM (5/6) 24 -75 47.34

8 BPSK (1/2) 32 -90 10.53

9 QPSK (1/2) 29 -88 20.43

10 QPSK (3/4) 29 -86 29.7

11 16-QAM (1/2) 29 -84 38.52

12 16-QAM (3/4) 28 -80 54.72

13 64-QAM (2/3) 27 -76 69.3

14 64-QAM (3/4) 26 -74 76.14

15 64-QAM (5/6) 24 -72 82.8

Note 1: Performance based on 20-MHz bandwidth

Note 2: Sensitivity and throughput are approximately proportional to bandwidth.
FCC Statement
Changes or modi cations not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit di erent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation

IC Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:

1. This device may not cause interference; and

2. This device must accept any interference, including interference that may cause
undesired operation of the device.

The term "IC: " before the certi cation/registration number only signi es that the Industry
Canada technical speci cations were met. This product meets the applicable Industry
Canada technical speci cations.

Le présent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement

CE Statement
This is a Class A product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.

CAUTION: To comply with the Europe CE requirement, this device must be installed with
CE certi ed computer equipment which meet with Class A limits. Be aware that outdoor
installations require special attention and will only be handled by trained and quali ed
installation personnel.

All cables used to connect this device must be shielded and grounded. Operation with
non-certi ed computers or incorrect cables may result in interference to other devices or
undesired e ects to the product. Particular attention has to be given allowed operational
frequencies.
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Doodle Labs:

EK-1700-22M3