PLASTERING &

BLOCK WORK
ACCESSORIES
CATALOGUE
INDEX
About SFSP 4

Expanded Metals, Plasterers’ Beads 11

Steel Lintels & Block Work Accessories 30

Blockwork Accessories 40

Block Ladder Reinforcement 74

1
ABOUT
SFSP
 SFSP
Specialized Factory
for Steel Products /s.a.r.l
www.sfsp-lebanon.com

Specialized Factory for Steel Products is a leading factory in Lebanon, established in the year 2011 to serve
the steel construction products industry in Lebanon and the region.
Production at the factory is observed using modern practices of manufacturing methods in the steel
construction industry with a definite compliance to international standards of fabrication.
SFSP adapts quickly and easily to market demands and requirements. The factory is operating a top of the
line production machinery, automated with high technology to ensure quality and maintain speed with
delicacy.
Quality at SFSP is uncompromised; the factory is working as per ISO 9001: 2008 Quality Management
System, with care for the safety of its workers and clients as well as the welfare of its society by
acknowledging the environmental key issues, trying to maintain a pollution-free production facility

TECHNICAL SERVICES
A crucial factor in the job of a factory is to provide continuous technical services and consultations.
That’s why SFSP has invested in a professional team of researchers and specialists.
SFSP has recruited brilliant graduates and experienced engineers having the appropriate knowhow on the
on latest technology changes and development in the steel building materials industry.
The product range is developed and updated according to the relevant standards of fabrication across
markets, whilst the business processes are evaluated to achieve maximum efficiency.

SFSP R&D Core Objectives

- Carry out responsibilities effectively in a safe and healthy work environment.
- Develop and implement research programs relevant to the products and solutions introduced and ensure
that the results are communicated clearly in-house and among the clients , concisely and accurately.

4
SOCIAL RESPONSIBILITY
Being socially responsible is a part of who we are and how we do our business. We aim to
provide useful products and services, to provide jobs and development opportunities for our
communities, and to gain satisfaction through meaningful work.
We make a difference by acting on the values and principles of our societies and we inspire
others to do so. At SFSP, we anticipate and reduce threats caused by environmental changes
or natural disasters, and we are well adapted to significant social changes.
We contribute to a more sustainable society by means of value and support to our consumers,
supply chains, and stakeholders. We are keen to identify ways they can improve our impacts
on the people and places we work and live in, and thereby become more valuable and valued
members of society.

- Organizational governance: We promote accountability and transparency at all levels, thus,

promoting responsibility
- Human care: We treat individuals with respect; and make efforts to help members of vulnerable
groups
- Labor practices: We provide just, safe and favorable conditions to workers
- Environment: At SFSP, we Identify and improve environmental impacts of our operations,
including the resource use of natural resources and waste disposal.
- Fair operating practices: Practicing accountability and fairness in dealings with other
businesses

At SFSP, we are committed to continuous improvement – ongoing learning,

process review and innovative thinking that foster new initiatives; and better
practices. Our environmental programs evolve to meet today’s changing needs
while; protecting resources for future; generations.

5
 ENVIRONMENTAL AWARENESS
SFSP is committed to the following:
•C  ompliance with all statutory and regulatory requirements related to its activities, products and
services and the environmental aspects.
• Identifying quality and environmental objectives by review and audit of the processes both in-
house and on-site.
•F  ormally setting objectives based on the results of the process reviews and their
significance in relation to their impact on the environment and the continual improvement
of the quality and environmental management system.
• Implementing management programs to achieve these objectives.
• Investing in a well-trained and motivated workforce.
•W  orking closely with suppliers and customers to ensure mutual understanding and
benefits of the environmental aspects consideration.
•R  eviewing our policy and objectives as part of the Management Review Process.
•C  ommunicating this policy to all persons working for or on behalf of the
organization.
•P  reventing and minimizing Pollution to the environment.

LOCATION
SFSP / Lebanon
management@sfsp-lebanon.com

Specialized Factory for Steel Products / s.a.r.l

Tanayel, Bekaa
Tel: +961 8 514 290
Fax: +961 8 514 291

6
HEALTH AND SAFETY
The Factory Management regard the health and safety of the employees, clients and all others that may be
affected by their operations to be of a major importance.

In support of this, the management promotes health and safety throughout the Factory’s operations
and endeavour to engender a positive attitude in all employees towards the prevention of accidents and
maintenance of healthy working arrangements.

The Factory satisfies the requirements of the Health, Safety and related legislation by setting out the
responsibilities of all levels of staff and the arrangements for carrying out those responsibilities and in
particular do what is reasonably practicable to:
1. Maintains safe & healthy working conditions.
2. Ensures that all facilities and equipment are safe and properly maintained.
3. Provides products that can be applied and used safely and without risk to health.
4. Provides and maintain working procedures, that are safe and without risk to health, throughout the its
operations in respect of:
•T he use, handling, storage, transports and disposal of materials and substances.
• The use of factory equipment.
•P otential emergency situations, including first aid, fire and escape of substances.
5. Ensure the competence of employees.

SFSP facilities are equipped with advanced machinery amongst are Cable Management Production Lines,
Steel cladding systems production lines, metal lathes and blockwork production line, garbage and linen
chutes production line, and also partition and ceiling profiles production capacity, and Computerized
Numerical Cut machines to ensure delicacy and speed of delivery.

CNC
PUNCHING

7
SFSP PRODUCTS
SFSP produces a variety of products ranging from cable management systems; cable trays, cable ladders, basket
trays, trunkings and support systems, to mechanical cladding fixations, steel lintels and block work accessories,
plasterers’ beads, expanded metal and block work reinforcement, strut channel systems, pipe clamps & hangers,
gypsum profiles as well as garbage and linen chutes. With the introduction of new machines and the enhancement
of production methods, SFSP continues to develop its production methods systematically as well as thoroughly.

Cable Trays & Accessories

Cable Trays are designed to meet most requirements of cable and
electrical wire installations and comply to local and international
standards of fabrications and finishes.

Cable Ladders (Welded & Swaged)

Cable Ladders of different side heights are available upon request.

Basket Trays & Accessories

SFSP’s Basket Tray systems make connections fast and simple with
limited need for tools. Its design allows for continuous airflow, and
prevents heating up of cables. SFSP’s Basket Tray comes in a full
range of sizes and is made with high-strength welded steel wires.

Cable Trunkings
Cable Trunkings and Accessories are offered in a comprehensive
range. Mill galvanized, hot-dip galvanized, and powder coated are the
various finishes produced in our factories.

Underfloor Trunking
Underfloor Trunking Systems solutions incorporate a range of products
for the distribution of power and data services , it is a coordinated set of
containments that protect, segregate, contain, and route cables within
a given environment.

Cable Management Support Systems

Cable Support Systems are well designed to provide necessary support for cable
trays, cable ladders and trunkings. Cable supports are manufactured according to
common standards from high quality raw materials.

C-Channel Strut Systems

SFSP’s Metal Framing Systems provide an economical solution for electrical,
mechanical and industrial supports with a wide variety of applications in the
construction industry.
Applications: - Pipe and Conduit Supports - Tunnel Pipe Stanchions - Racks and
Shelvings - Wall Framings.

8
Expanded Metals, Plasterers` Beads
Expanded Metals help the formation of joints, protection of corners and resistance
against cracks, chips and impact damage.

Block Ladder Reinforcement

SFSP ladder and truss types are used for the reinforcement of brick and block
masonry to give improved tensile strength to walls subjected to lateral loading e.g.
wind and seismic. SFSPblock reinforcements reduces the risk of cracking either at
stress concentration around opening.

Steel Lintels & Block Work Accessories

Steel Lintels provide a combination of strength and light weight, resulting in efficient
load bearing performance and increased productivity on site. They are characterized
by their ease of installation in addition to time as well as money saving.

Pipe Clamps & Hangers

Pipe Clamps and Hangers from SFSP used in the support of pipes and equipments
are manufactured according to the highest standards of fabrication.A diversified
choice of Pipe Hangers, Pipe Clamps, EMT Straps, Omega Clamps, Beam Clamps,
J and U-Bolts and Threaded Accessories.

Marble & Granite Fixings

Stangle Cladding Fixation includes design, calculation and production of several
types of mechanical fixings and accessories used for cladding purposes. Stainless
and galvanized steel are among the various materials used in the fabrication.

Dry Wall & Ceiling Profiles

SFSP provides a complete product range for dry wall and ceiling constructions.
Studs, Runners, Furring Channels, Ceiling Channels and Wall Angles are among the
range of products produced to service the dry wall installers.

Garbage & Linen Chutes

Chutes from SFSP are very convenient, simple and low cost method of controlling
and disposing of refuse and linen. Chutes meet the most stringent requirements
of environmental health and safety. Chutes are used as original equipment in new
buildings, such as : Hotels, Hospitals, High Rises and Residential Towers.

Expansion joints COVERS

SFSP manufactures architectural lines of thermal, seismic, waterproof, and fire-
rated expansion joint systems meeting aesthetic and structural demands of multiple
projects including airports, hospitals, commercial and residential buildings, shopping
malls, and several other structural types
Materials used in SFSP expansion joints systems includes 6063 Aluminum, Rubber
(Natural and Neoprene), Stainless Steel, TPE.

9
PLASTERERS' BEADS
PLASTERERS` BEADS
SFSP manufactures Plasterers’ Beads in accordance with:
- BS EN 13658-1:2005 For Internal Plastering
- BS EN 13658-2:2005 For External Rendering

Relevant Standards
- BS EN 13914-1:2016 For External Rendering
- BS EN 13914-2:2016 For Internal Rendering
- BS 6452:Part 1:1984
- BS 5262:1991
- BS 8212:1995

Finishing
- Galvanized Steel according to BS EN 10346:2015
- Stainless Steel according to BS EN 10088-2:2014

• For
 interior applications:
Galvanized Steel according to BS EN 10327 superseded by BS EN 10346:2009, zinc coated on both sides.

•F or exterior applications and humid environment:

Austenitic stainless steel according to BS EN 10088- Mat.No.1.4301

TECHNICAL SPECIFICATIONS

METAL BEADS
Relevant Standards:
• BS EN 13914- 2 : 2005 Design , Preparation and Application of External Rendering and Internal
Plastering
•B S EN 13658-1 : 2005 Metal Lath and Beads – Definitions , Requirements and Test Methods ,
Internal Plastering Supersedes BS 1369-1 :1987 and BS 6452-1 : 1984
•B S EN 13658 – 2 : 2005 Metal Lath and Beads – Definitions , Requirements and Test Methods ,
External Plastering Supersedes BS 1369-2 :1987 and BS 6452-2 : 1984
• ASTM C841 – Standard Specification for Installation of Interior Lathing and Furring
• ASTM C847 - Standard Specification for Metal Lath
•A STM C1063 – Standard Specification for Installation of Lathing and Furring for Portland
Cement – Based Plaster
• International Building Code , ( IBC ) Chapter 25
• International Residential Code , ( IRC ) Chapter 7

GALVANIZED STEEL:
• BS EN 10346:2009 (formerly BS EN 10142: 1991) ASTM A 653/A 653M

STAINLESS STEEL:
•B S EN 10088-2:2005 (which was directly equivalent to formerly BS 1449:Part 2:1983
• ASTM A240/A240M
 ANGLE BEAD
Angle beads provide with its solid
metal nose a straight corner. Expanded
diamond mesh wings allow for keying
the plaster right up to the nose of the
bead. It is designed to protect the
corners.

The flanges can be easily fixed over

irregular, uneven surfaces. Guarantees
a perfect bond and provides better
effective reinforcement at corners
where it is mostly needed.

Angle bead is recommended for a

greater corner protection and a precise
straight line. Available in galvanized
finish for internal use, and in stainless
steel for external use.

Plaster Depth Length

Description Length of wings (mm) Material
(mm) (mm)
Angle Bead 50 12 - 19 2700 GI (Galvanized Steel)
Angle Bead 50 12 - 19 2850 GI (Galvanized Steel)
Angle Bead 50 12 - 19 3000 GI (Galvanized Steel)
Angle Bead 65 12 - 19 2700 GI (Galvanized Steel)
Angle Bead 65 12 - 19 2850 GI (Galvanized Steel)
Angle Bead 65 19 3000 GI (Galvanized Steel)
Angle Bead 70 19 2700 GI (Galvanized Steel)
Angle Bead 70 19 2850 GI (Galvanized Steel)
Angle Bead 70 19 3000 GI (Galvanized Steel)
Angle Bead 75 19 2700 GI (Galvanized Steel)
Angle Bead 75 19 2850 GI (Galvanized Steel)
Angle Bead 75 19 3000 GI (Galvanized Steel)

Plaster Depth Length

Description Length of wings (mm) Material
(mm) (mm)
Angle Bead 50 12 - 19 2700 SS A4 (Stainless Steel)
Angle Bead 50 12 - 19 2850 SS A4 (Stainless Steel)
Angle Bead 50 12 - 19 3000 SS A4 (Stainless Steel)
Angle Bead 65 12 - 19 2700 SS A4 (Stainless Steel)
Angle Bead 65 12 - 19 2850 SS A4 (Stainless Steel)
Angle Bead 65 19 3000 SS A4 (Stainless Steel)
Angle Bead 70 19 2700 SS A4 (Stainless Steel)
Angle Bead 70 19 3000 SS A4 (Stainless Steel)
Angle Bead 75 19 3000 SS A4 (Stainless Steel)

12
 MICRO ANGLE BEAD
Micro angle beads are designed for thin coat plaster and are used at corners for protection. Micro angle beads are
popular thin coat beads with fine mesh wings. Fix either by galvanized nails or using plaster dabs.

Length
Description Wing Width (mm) Material
(mm)
Micro Angle Bead 40 2000 GI (Galvanized Steel)

Micro Angle Bead 40 3000 GI (Galvanized Steel)

Length
Description Wing Width (mm) Material
(mm)
Micro Angle Bead 40 3000 SS A4 (Stainless Steel)

13
 PLASTER STOP BEAD
Plaster stop bead provides a straight accurate line, it is used to reinforce the plaster or render on its edge. Plaster stop bead is
designed as a universal plaster stop used at wall ends, door and window openings to make a neat, flush frame.
Plaster stop bead protects the edge from damage and helps corner shrinkage cracks. Plaster stop bead can be used for many
different applications and can also be less expensive compared to other construction methods.
The beads are designed with a ridge of nail holes to provide easy installation.
Plaster stop beads can be used in all types of buildings and constructions and all types of cement plastering works Plaster stop
beads help in improving the quality of the building with reference to the abutments of the wall surfaces to other dissimilar
surfaces. Plaster stop beads are used between wall surfaces and abutment of doors and window frames and in places
wherever the plaster ends.

Plaster Depth Length

Description Material
(mm) (mm)

Plaster Stop Bead 10 2850 GI (Galvanized Steel)

Plaster Stop Bead 10 3000 GI (Galvanized Steel)

Plaster Stop Bead 13 2700 GI (Galvanized Steel)

Plaster Stop Bead 13 3000 GI (Galvanized Steel)

Plaster Stop Bead 16 2700 GI (Galvanized Steel)

Plaster Stop Bead 16 3000 GI (Galvanized Steel)

Plaster Stop Bead 19 2850 GI (Galvanized Steel)

Plaster Stop Bead 19 3000 GI (Galvanized Steel)

Plaster Depth Length

Description Material
(mm) (mm)

Plaster Stop Bead 13 2700 SS A4 (Stainless Steel)

Plaster Stop Bead 13 3000 SS A4 (Stainless Steel)

Plaster Stop Bead 16 2850 SS A4 (Stainless Steel)

Plaster Stop Bead 16 3000 SS A4 (Stainless Steel)

Plaster Stop Bead 19 3000 SS A4 (Stainless Steel)

14
 MICRO PLASTER STOP BEAD
Micro plaster stops are designed for thin coat edge protection at openings. They provide abutment of plastered areas of other
wall finishes. Micro plaster stops provide efficient keying and excellent finishes.

Micro plaster stops make neat, flush frames for windows and other openings.

Plaster Depth Length

Description Material
(mm) (mm)

Micro Plaster Stop Bead 3 2700 GI (Galvanized Steel)

Micro Plaster Stop Bead 3 2850 GI (Galvanized Steel)

Micro Plaster Stop Bead 3 2900 GI (Galvanized Steel)

Micro Plaster Stop Bead 3 3000 GI (Galvanized Steel)

Micro Plaster Stop Bead 6 2700 GI (Galvanized Steel)

Micro Plaster Stop Bead 6 2850 GI (Galvanized Steel)

Micro Plaster Stop Bead 6 2900 GI (Galvanized Steel)

Micro Plaster Stop Bead 6 3000 GI (Galvanized Steel)

Plaster Depth Length

Description Material
(mm) (mm)
Micro Plaster Stop Bead 3 2700 SS A4 (Stainless Steel)

Micro Plaster Stop Bead 3 2850 SS A4 (Stainless Steel)

Micro Plaster Stop Bead 3 2900 SS A4 (Stainless Steel)

Micro Plaster Stop Bead 3 3000 SS A4 (Stainless Steel)

Micro Plaster Stop Bead 6 2700 SS A4 (Stainless Steel)

Micro Plaster Stop Bead 6 2850 SS A4 (Stainless Steel)

Micro Plaster Stop Bead 6 2900 SS A4 (Stainless Steel)

Micro Plaster Stop Bead 6 3000 SS A4 (Stainless Steel)

15
 CONTROL JOINT BEAD
Designed to minimize the plaster cracking and to allow movement in the plaster. Control
Joint Bead overcomes movement tolerances in plaster Expansion / Control joints provide
excellent expansion control for both walls and ceiling and offers positive locking of the
stucco to the edge of the joint.
Control joint bead helps reducing stucco separation at the edge of the joint.
They provide for the basic expansion and contraction that can be expected
in the stucco membrane, such as initial shrinkage during curing and
minor thermal expansion and contraction.
Available in galvanized finish for internal use and in stainless
steel for external use.

Plaster Depth Length

Description Material
(mm) (mm)

Control Joint Bead 13 3000 GI (Galvanized Steel)

Control Joint Bead 16 3000 GI (Galvanized Steel)

Control Joint Bead 19 3000 GI (Galvanized Steel)

Plaster Depth Length

Description Material
(mm) (mm)

Control Joint Bead 13 3000 SS A4 (Stainless Steel)

Control Joint Bead 16 3000 SS A4 (Stainless Steel)

Control Joint Bead 19 3000 SS A4 (Stainless Steel)

16
ARCHITRAVE BEAD
Mainly used for decorative purposes to give a channel gap
or a shadow between different walls finishes.

Plaster Depth Length

Description Material
(mm) (mm)

Architrave Bead 10 3000 GI (Galvanized Steel)

Architrave Bead 13 3000 GI (Galvanized Steel)

Architrave Bead 16 3000 GI (Galvanized Steel)

Architrave Bead 19 3000 GI (Galvanized Steel)

Plaster Depth Length

Description Material
(mm) (mm)

Architrave Bead 13 3000 SS A4 (Stainless Steel)

Architrave Bead 13 3000 SS A4 (Stainless Steel)

Architrave Bead 16 3000 SS A4 (Stainless Steel)

Architrave Bead 19 3000 SS A4 (Stainless Steel)

ARCHITRAVE BEAD WITHOUT FLANGE

Mainly used for decorative purposes to give a shadow
between different walls finishes.

Plaster Depth Length

Description Material
(mm) (mm)

Architrave Bead 10 3000 GI (Galvanized Steel)

Architrave Bead 13 3000 GI (Galvanized Steel)

Architrave Bead 16 3000 GI (Galvanized Steel)

Architrave Bead 19 3000 GI (Galvanized Steel)

Plaster Depth Length

Description Material
(mm) (mm)

Architrave Bead 13 3000 SS A4 (Stainless Steel)

Architrave Bead 13 3000 SS A4 (Stainless Steel)

Architrave Bead 16 3000 SS A4 (Stainless Steel)

Architrave Bead 19 3000 SS A4 (Stainless Steel)

17
 MOVEMENT BEAD
Movement Beads are used to relieve the stress and strain in large plaster areas of wall and ceiling stucco areas and to allow for
movement between adjoining surface finishes.
Movement Beads overcome movement tolerance in plaster and render finishes and minimize the cracking in plaster. Movement
Beads act as stop barriers when a change in finish is required.
The purpose of the movement joint is to assure the proper plaster or stucco thickness also.
Movement Beads are used in all types of building construction wherever expansion joints are present, for all types and kinds of
bricks and reinforced concrete.
It helps in improving the quality of the building with respect to the openings that are invariably created because of the space
provided for expansion.

Plaster Depth Length

Description Material
(mm) (mm)

Movement Bead 19 3000 GI (Galvanized Steel)

Movement Bead 19 3000 GI (Galvanized Steel)

Movement Bead 19 3000 GI (Galvanized Steel)

Movement Bead 19 3000 GI (Galvanized Steel)

Plaster Depth Length

Description Material
(mm) (mm)

Movement Bead 19 3000 SS A4 (Stainless Steel)

Movement Bead 19 3000 SS A4 (Stainless Steel)

Movement Bead 19 3000 SS A4 (Stainless Steel)

Movement Bead 19 3000 SS A4 (Stainless Steel)

18
 ALUMINUM CHANNEL
The Aluminum Channel is a versatile product, commonly used for groove
making; a decorative purpose for plaster finishes.

Size Length Thickness

Description Material
(mm) (mm) (mm)
Aluminum Channel 8x8x8 6000 1.5 Aluminum

Aluminum Channel 10x10x10 6000 1.5 Aluminum

Aluminum Channel 10x20x10 6000 1.5 Aluminum

Aluminum Channel 12.5x23x12.5 6000 1.5 Aluminum

Aluminum Channel 15x15x15 6000 1.5 Aluminum

Aluminum Channel 15x20x15 6000 1.5 Aluminum

Aluminum Channel 20x20x20 6000 1.5 Aluminum

Aluminum Channel 25x25x25 6000 1.5 Aluminum

CORNER MESH
Corner Mesh lathes are used to prevent cracking in the plaster of the
corner, and by protecting the inner corner against various factors. Corner
Mesh lathes helps the formation of proper plastering.

Length of wings Length

Description Material
(mm) (mm)

Corner Mesh 50 3000 GI (Galvanized Steel)

Corner Mesh 75 3000 GI (Galvanized Steel)

Corner Mesh 100 3000 GI (Galvanized Steel)

Length of wings Length

Description Material
(mm) (mm)

Corner Mesh 50 3000 SS A4 (Stainless Steel)

Corner Mesh 75 3000 SS A4 (Stainless Steel)

Corner Mesh 100 3000 SS A4 (Stainless Steel)

19
 STRIP MESH
Strip Mesh Lathes are used along stress lines where cracking
is likely. Strip mesh provides reinforcement to the plaster to
prevent crack over joints of different materials.

Strip Mesh Width Length Weight

Description Material
(mm) (mm) (kg/m2)
Strip Mesh 152 2440 0.75 GI (Galvanized Steel)
Strip Mesh 152 2440 0.80 GI (Galvanized Steel)
Strip Mesh 102 2440 0.75 GI (Galvanized Steel)
Strip Mesh 102 2440 0.80 GI (Galvanized Steel)
Strip Mesh 102 2440 1.91 GI (Galvanized Steel)
Strip Mesh 152 2500 1.92 GI (Galvanized Steel)
Strip Mesh 152 3000 1.10 GI (Galvanized Steel)
Strip Mesh 203 2440 0.79 GI (Galvanized Steel)
Strip Mesh 203 2440 0.90 GI (Galvanized Steel)
Strip Mesh 203 2440 1.10 GI (Galvanized Steel)
Strip Mesh 203 2440 1.60 GI (Galvanized Steel)
Strip Mesh 203 3000 1.10 GI (Galvanized Steel)

METAL SHEET LATH

Sheet lath is produced as a key for plaster when applied on
suspended ceiling and walls. Sheet lath is used for encasing
steel column and beams, assisting in the protection from
fire. Sheet lath is used to reinforce plaster between dissimilar
areas and at crack-prone areas adjacent to openings.

Strip Mesh Width Length Weight

Description Material
(mm) (mm) (kg/m2)
Metal Sheet Lath 500 2440 0.75 GI (Galvanized Steel)
Metal Sheet Lath 610 2440 0.9 GI (Galvanized Steel)
Metal Sheet Lath 610 2440 1.22 GI (Galvanized Steel)
Metal Sheet Lath 610 2440 1.60 GI (Galvanized Steel)
Metal Sheet Lath 610 2440 1.85 GI (Galvanized Steel)
Metal Sheet Lath 610 2440 1.90 GI (Galvanized Steel)
Metal Sheet Lath 610 2440 2.84 GI (Galvanized Steel)
Metal Sheet Lath 150 2440 1.10 GI (Galvanized Steel)

20
 COIL LATH

An easy to fix lath, provides a secure key for plaster and render applications as well as offering effective joint and crack rein-
forcement.

Coil Lath Width Length

Description Material
(mm) (mm)

Coil Lath 102 5000 GI (Galvanized Steel)

Coil Lath 152 5000 GI (Galvanized Steel)

Coil Lath 203 5000 GI (Galvanized Steel)

Coil Lath 305 5000 GI (Galvanized Steel)

Coil Lath Width Length

Description Material
(mm) (mm)

Coil Lath 102 5000 SS A4 (Stainless Steel)

Coil Lath 152 5000 SS A4 (Stainless Steel)

Coil Lath 203 5000 SS A4 (Stainless Steel)

Coil Lath 305 5000 SS A4 (Stainless Steel)

21
 METAL RIB LATH
Rib lathes are expanded metal lathes stiffened with longitudinal ribs. The furring design of the mesh provides efficient
background plaster for construction of partition, suspend ceiling and refurbishment works. Rib lath is ideal for refurbishing
damaged or old masonry walls, when a key for rendering is not certain due to disintegration or softening of the wall face.

Installation:
Rib lath should be fixed with apexes of ribs against the wall, edge ribs of sheet nesting into each other should be wire-tied every
150mm and ends fixing should be used at sufficient intervals to hold the lath firmly in position.

Fixing of Rib lath sheets:

Rib lath is fixed so that the tip of the rib is placed against the supporting background. The rib of the sheet should run at right
angles to any supports. Ensure that sheets are overlapped by a minimum of 50mm end to end and by 25mm width ways and
that the ribs are nestled together.

Timber Support:
Rib lath is fixed at each rib to timber supports using plasterers’ nails or staples. Ensure that compatible corrosion resistant
fixings are used, i.e. Do not use galvanized fixings for stainless steel.

Metal support:
Rib lath is fixed at each rib to metal support using 1.63mm galvanized or stainless steel tying wire. When joining Rib lath sheets
overlap the edge ribs and tie the edges with 1.22mm tying wire at 150mm centers.

Solid Background:
Rib lath can be fixed to a solid background using a suitable fixing which holds the ribs firmly against the background. Where
sheets are installed vertically, fixings should be positioned through all ribs at 600mm centers to ensure adequate stability.

22
50mm end overlap 600mm 150mm Fixing Location
1.2mm wire tie or screw location

Reference Weight (kg/m2) Rib Height (mm) Size (mm) Material

RBL 148 - GS 1.48 10 2500 x 700 Galvanized
RBL 184 - GS 1.84 10 2500 x 700 Galvanized
RBL 222 - GS 2.22 10 2500 x 700 Galvanized
RBL 148 - SS 1.48 10 2500 x 700 Stainless Steel
RBL 184 - SS 1.84 10 2500 x 700 Stainless Steel
RBL 222 - SS 2.22 10 2500 x 700 Stainless Steel

23
 HY-RIB LATH
Manufactured from Pre-galvanized steel to BSEN 10327.
Hy Rib is available using stainless steeI to BSEN 10088-2 type 1 .4301 .

The profile of Hy Rib open mesh in combination with its ribs provide an inherently stiff sheet along its length.

It can be used for flat and curved surfaces.

Depth of joint Concrete Pressure Clear Distance Between Supports (A) for Hy-Rib
(D) Ciria 108 Assumed for Hy-Rib 2411 2611 2811
mm kN/m2 kN/m2 mm mm mm

250 6.25 3.2 1250 1025 950

500 12.5 6.3 900 725 675
750 18.75 9.5 725 600 550
1000 25.0 12.7 625 500 475
1250 31.25 15.8 575 450 425
1500 37.5 19.0 525 425 400
2000 50.0 25.3 450 375 350
2500 62.5 31.7 400 325 300
3000 75.0 38.0 375 300 275

Reference Rib Height (mm) Material Length (mm) Width (mm) Thickness Weight
(mm) (kg/sqm)

HRB 16 - GS 16 Galvanized 2500 450 0.5 3.25/3.39

HRB 18 - GS 18 Galvanized 2500 450 0.5 4.00/4.86

Thickness (mm) Width (mm) Rib Height (mm) Rib Distance (mm) Length

0.25 445 13 89 According to Order

0.3 445 13 89 According to Order
0.3 445 20.5 89 According to Order
0.35 445 13 89 According to Order
0.35 445 20.5 89 According to Order
0.4 445 13 89 According to Order
0.4 445 20.5 89 According to Order
0.5 445 20.5 89 According to Order

24
25
Hy Rib: Fields Of Application and Advantage
Application in concrete construction
- For expansion joints as lost form.
- For flat spread even or moulded construction units as lost form.

Advantages in concrete construction

- Perfect bonding of the concreting sections without any further treatment of the expansion joint.
- Reduction of the concrete pressure during the concerting process.
- Minimising of hollow spaces and visual supervision of the process possible.
- Hy Rib reduces the risk of trapped air and voids within the concrete.
- The range of narrower sheet widths improves site productivity and minimises wastage.

Application with plastering works

- For wire lattice construction with spans upto 1200mm.

Advantages with plastering works

- High Stability.
- Especially economical with great spans.

Hy Rib Processing Placing:

- Ribs must not be damaged or deformed when fastened.
- The sheets are placed overlapping rib in rib.
- With concrete works the rib back of the metal mesh always point to the first concreting section.
The open ribs on the other side ensu re reliable bonding to the second concreting section.

Reference Weight (kg/sqm) Rib Depth (mm) Width (mm) Length (m) Material

HR 3 3.39 21 445 2 up to 5 Galvanized

HR 4 4.86 21 445 2 up to 5 Galvanized
HR 6 4.86 21 445 2 up to 5 Galvanized

26
The connection reinforcement (5) required is guided
through the metal mesh. For this purpose Hy Rib is incised
with sheets sheares or RSM special cam shears. Rib cutting
in should be avoided if possible. A

Joint bands can be mounted is placed between two Hy Rib

strips. For this purpose Hy Rib is incised with sheet shears 2
or RSM special cam shears. The stiffening wood beams are
provided with cut outs for the joint band.

Hy Rib is nailed to angular or profiled stiffening wood

4
beams (2).
Ribs should not be damaged when they are deformed The
closed ribs points towards the first concreting section,
since at this point the ribs are exposed to the greater 3 5
pressure. The ribs are placed cross to the stiffening wood
beams.
Fig 1 Straight expansion joint with Hy-Rib
- Hy Rib requires the same concrete covering as reinforcing
steel. In order to maintain the prescribed concrete
covering timber rails (3) are nailed to the upper and
lower sides of the construction unit as range spacers and
to the stiffening woods beams. A

- The stiffening wood beams (2) themselves are nailed to

the sheathing and held by wooden ledges (4), which are 2
propped against the existing reinforcement. 1

3 4

Fig 2 Profiled expansion joint with Hy-Rib

A
1

6 2

Fig 3 Expansion joint with Hy-Rib and joint band

27
STEEL LINTELS
STEEL LINTELS
Steel Lintels provide a combination of strength and light weight,
resulting in efficient load bearing performance and increased
productivity on site. They are characterized by their ease of installation
in addition to time as well as money saving.
Calculations are provided by our design office in Stuttgart, Germany.

SFSP manufactures Steel Lintel in accordance with:

- BS EN 845-2:2013+A1:2016

Relevant Standards
- BS 5977 Part 2:1983

Finishing
- Galvanized Steel according to BS EN 10346:2015
- Hot Dipped Galvanized according to BS EN ISO 1461:2009
- Stainless Steel according to BS EN 10088-2:2014

MATERIAL

• Hot rolled steel S235JR as per EN 10025 / ASTM A-1011 CS Type B

(formerly ASTM A569 or ASTM A570)

• Cold rolled steel DC01 as per EN 10130:2006 / ASTM A1008 CS

Type B ( formerly ASTM A-366)

30
31
 CHANNEL LINTELS
UML 100/50 Safe Working Load Tables

Lintel Code UML 100/50-2 UML 100/50-3 UML 100/50-4

Sheet Thickness (mm) 2.0 3.0 4.0

Length in meters Uniformly Distributed Loads (kN/m)

0.90 - 1.20 0.44 1.5 2.55

5 cm

1.30 - 1.50 0.29 1.0 1.70

1.60 - 1.80 0.20 0.72 1.10
10.3 cm
1.90 - 2.10 0.14 0.52 0.68
2.20 - 2.40 0.10 0.33 0.43

UML 100/75 Working Load Tables

Lintel Code UML 100/75-4

Sheet Thickness (mm) 4.0

Length in meters Uniformly Distributed Loads (kN/m)
7.5 cm

0.90 - 1.20 3.55

1.30 - 1.50 2.40
10.3 cm 1.60 - 1.80 1.70
1.90 - 2.10 1.28
2.20 - 2.40 0.98

UML 150/50 Working Load Tables

Lintel Code UML 150/50-2 UML 150/50-3 UML 150/50-4

Sheet Thickness (mm) 2.0 3.0 4.0

Length in meters Uniformly Distributed Loads (kN/m)
5 cm

0.90 - 1.20 0.44 1.5 2.65

1.30 - 1.50 0.28 1.0 1.76
15.3 cm
1.60 - 1.80 0.20 0.72 1.24
1.90 - 2.10 0.14 0.55 0.74
2.20 - 2.40 0.10 0.35 0.47

UML 150/75 Working Load Tables

Lintel Code UML 150/75-4

Sheet Thickness (mm) 4.0

7.5 cm

Length in meters Uniformly Distributed Loads (kN/m)

0.90 - 1.20 3.60

1.30 - 1.50 2.40
15.3 cm
1.60 - 1.80 1.73
1.90 - 2.10 1.28
2.20 - 2.40 0.98

Safety Factor is at 135%

32
 for Solid Work
UML 200/50 Working Load Tables

Lintel Code UML 200/50-2 UML 200/50-3 UML 200/50-4

Sheet Thickness (mm) 2.0 3.0 4.0

Length in meters Uniformly Distributed Loads (kN/m)
5 cm 0.90 - 1.20 0.42 1.50 2.70
1.30 - 1.50 0.28 1.0 1.80
20.3 cm 1.60 - 1.80 0.19 0.70 1.25
1.90 - 2.10 0.13 0.52 0.78
2.20 - 2.40 0.09 0.40 0.49

UML 200/75 Working Load Tables

Lintel Code UML 200/75-4

Sheet Thickness (mm) 4.0

Length in meters Uniformly Distributed Loads (kN/m)
7.5 cm

0.90 - 1.20 3.60

1.30 - 1.50 2.40
1.60 - 1.80 1.73
20.3 cm
1.90 - 2.10 1.28
2.20 - 2.40 0.98

UML 250/50 Working Load Tables

Lintel Code UML 250/50-2 UML 250/50-3 UML 250/50-4

Sheet Thickness (mm) 2.0 3.0 4.0

Length in meters Uniformly Distributed Loads (kN/m)
5 cm

0.90 - 1.20 0.43 1.50 2.70

25.3 cm 1.30 - 1.50 0.26 1.0 1.80
1.60 - 1.80 0.18 0.70 1.28
1.90 - 2.10 0.13 0.52 0.80
2.20 - 2.40 0.09 0.38 0.50

UML 250/75 Working Load Tables

Lintel Code UML 250/75-4

Sheet Thickness (mm) 4.0

Length in meters Uniformly Distributed Loads (kN/m)
7.5 cm

0.90 - 1.20 3.63

25.3 cm 1.30 - 1.50 2.45

1.60 - 1.80 1.73
1.90 - 2.10 1.25
2.20 - 2.40 0.98

Safety Factor is at 135%

33
 LINTELS INSTALLATION IN MINUTES
Comparison of installation times of a SFSP steel lintel and a conventional concrete cast in-situ lin-
tel.

One man can carry the lintel

2
Lintel is placed in position

Continuation of block work

can be carried out immediately

4
6min
Before laying the blocks down on lintel, place a
temporary support beneath the lintel to provide
support and to prevent deflection. Temporary support
can be removed after the mortar sets, (approximately
in 3 to 5 hours).
Total installation time: 6 minutes

34
 Concrete Cast - On site Installation

Vertical frame work erected, end secured and horizontal

level taken

Commencement of lintel form work

3
Continuation of form work

4
Completion of lintel after steel reinforcement and
48min pouring of concrete

Total installation time: 48 minutes

In the time taken to install just one concrete lintel, eight SFSP lintels could have been installed…

35
 ARCH LINTELS
Dimensions
Description Material

R
(mm)
D
Arch Lintel 320x250x75x2.00 GI (Galvanized Steel)
A
Arch Lintel 420x250x75x2.00 GI (Galvanized Steel)

Arch Lintel 520x200x75x2.00 GI (Galvanized Steel)

H

Arch Lintel 520x250x75x2.00 GI (Galvanized Steel)

A
Arch Lintel B 620x250x75x2.00 GI (Galvanized Steel)
L
Arch Lintel 920x250x75x2.00 GI (Galvanized Steel)
C
Arch Lintel 200x50x3.00x2500 Hot Dip Galvanized

B
8 7 R 6 5 4

B
H

H
A
L
W PROPRIETARY A
THE INFORMATION C
DRAWING IS THE SO
<INSERT COMPANY
REPRODUCTION IN
WITHOUT THE WRITTE
<INSERT COMPANY
PROHIBITED.

8 7 6 5 4
7
R

A
H

A
B
L

36
 LINTELS BRACKETS
Brackets are supplied with fixing holes to suit metal expansion anchor sizes as specified below.

37
 BLOCKWORK
ACCESSORIES
 BLOCK WORK ACCESSORIES
SFSP manufactures Block Work Accessories in accordance with:
- BS EN 845-1:2013+A1:2016

Relevant Standards
- BS 1243:1978

Finishing
- Galvanized Steel according to BS EN 10346:2015
- Hot Dipped Galvanized according to BS EN ISO 1461:2009
- Stainless Steel according to BS EN 10088-2:2014

Materials
• Hot rolled steel S235JR as per EN 10025 / ASTM A-1011 CS Type B (formerly ASTM A569 or ASTM A570)

• Cold rolled steel DC01 as per EN 10130:2006 / ASTM A1008 CS Type B (formerly ASTM A-36) and then:

Manufacture Specifications:
- Steel Lintels - manufactured to BS 5977: Part 2 :1983 / BS EN 845-2:2003.
- Wall Ties - manufactured to BS EN 845-1:2003 ( Formerly BS 1234 ).
- Block Reinforcement Ladder and Truss - manufactured as per ASTM A82 / ASTM A951 / BS 845-3:2003 DIN 488.

40
41
 CRAMPS AND TIES

Head End Options

These ends have been manufactured to fit standard channel sections that is preset into concrete or surface fixed to any inner
skin or structural ground

L-Angle Sloted L-Angle Hole Plain Plain

RCH / SCH Channel CCH Channel DCH Channel Bolt Screw Fixing
REF: -/-/36 REF: -/-/10 REF: -/-/30 REF: -/-/50

42
Tail End Options
The most common method of anchoring a tie to a slab facing, is by means of a round dowel into a drilled hole, split tangs on
the tie may also be used. For bonding into brickwork the “Fishtailed” end is the traditional.

3 Holes Turned Down Split Tie Plain

Returned Z Plain with pin Plain 1 Hole Plain 3 Holes

Fishtailed Turned Down Dowel

Corrugated REF: -/-/99 REF: -/-/88 REF: D/-/-

Split Tang Turned Down Fishtailed PLain

REF: S/-/- REF: T/-/- REF: B/-/- REF: P/-/-

43
Shank Options
Shanks may be plain or may include a drip to stop the passage of moisture across

Drip Double Twist Half Twist Full Twist

Plain Dimpled Full Twist Half Twist

REF: -/P/- REF: -/D/- REF: -/F/- REF: -/H/-

Debonding Block Ties

REF: DS/-/-

Pin

Rubber Sleeve
REF: S/-/-

44
Frame Cramps and Channel Ties
Frame cramps with a single 7mm diameter hole or an 8mm x 30mm vertical slot can be fixed to concrete, steelwork or masonry.
M6 Single Expansion bolts are recomended for fixing to concrete, setscrews or self-drilling screws for steelwork, and suitable
plugs and screws for fixing to masonry. Poor substrates will limit the capacity of frame crams and site treating is advisable in
some cases. The performance will also be determined by the position of the fixing. Channel ties fixed to steelwork or concrete
at the lowest point of slot will have a safe working load of approximately 1kN. the capacity will reduce as the fixing is moved
further away from the bend and greater movement shall be expected than with other wall ties.

Block Ties Frame Cramps

Block Tie Corrugated with Bolt Screw Fixing

Dimensions
Description BxAxCxT Material
(mm)

Corrugated Block Tie 30x50x150x1.50 MS (Mild Steel)

Corrugated Block Tie 30x50x150x2.00 MS (Mild Steel)

Corrugated Block Tie 30x50x200x2.00 MS (Mild Steel)

Corrugated Block Tie 25x30x150x1.50 SS A4 (Stainless Steel)

Corrugated Block Tie 25x30x150x2.00 SS A4 (Stainless Steel)

Corrugated Block Tie 25x30x200x2.00 SS A4 (Stainless Steel)

Corrugated Block Tie 25x40x150x2.00 SS A4 (Stainless Steel)

Corrugated Block Tie 30x50x150x1.50 SS A4 (Stainless Steel)

Corrugated Block Tie 30x50x150x2.00 SS A4 (Stainless Steel)

Corrugated Block Tie 30x50x200x2.00 SS A4 (Stainless Steel)

Corrugated Block Tie 50x50x200x2.00 SS A4 (Stainless Steel)

Corrugated Block Tie 25x30x200x1.80 Galvanized

Corrugated Block Tie 20x75x200x1.50 Galvanized

Corrugated Block Tie 25x30x150x2.00 Galvanized

Corrugated Block Tie 25x30x200x1.50 Galvanized

Corrugated Block Tie 25x30x200x2.00 Galvanized

Corrugated Block Tie 30x50x150x1.50 Galvanized

Corrugated Block Tie 30x50x150x3.00 Galvanized

Corrugated Block Tie 30x50x200x1.50 Galvanized

Corrugated Block Tie 30x50x200x2.00 Galvanized

Corrugated Block Tie 38x50x200x1.50 Galvanized

Corrugated Block Tie 40x50x150x3.00 Galvanized

45
 Three-Hole Block Tie

Dimensions
Description BxAxCxT Material
(mm)

Three - Hole Block Tie 30x50x150x1.50 Galvanized

Three - Hole Block Tie 20x30x150x3.00 Galvanized

Three - Hole Block Tie 20x30x250x3.00 Galvanized

Three - Hole Block Tie 20x30x255x3.00 Galvanized

Three - Hole Block Tie 25x30x150x1.50 Galvanized

Three - Hole Block Tie 25x30x200x1.50 Galvanized

Three - Hole Block Tie 25x30x200x1.80 Galvanized

Three - Hole Block Tie 25x30x200x2.00 Galvanized

Three - Hole Block Tie 30x40x200x1.50 Galvanized

Three - Hole Block Tie 30x40x200x2.00 Galvanized

Three - Hole Block Tie 30x40x300x2.00 Galvanized

Three - Hole Block Tie 25x30x200x2.00 SS A4 (Stainless Steel)

Three - Hole Block Tie 30x50x150x1.50 SS A4 (Stainless Steel)

Three - Hole Block Tie 30x50x200x1.50 SS A4 (Stainless Steel)

Three - Hole Block Tie 20x30x150x3.00 SS A6 (Stainless Steel)

Three - Hole Block Tie 20x30x250x3.00 SS A6 (Stainless Steel)

Three - Hole Block Tie 20x30x255x3.00 SS A6 (Stainless Steel)

Three - Hole Block Tie 25x30x200x2.00 SS A6 (Stainless Steel)

46
Block Tie Plain

Dimensions Dimensions
Description AxBxCxT Material Description AxBxCxT Material
(mm) (mm)

Block Tie Plain 27x80x150x2.00 Galvanized Block Tie Plain 27x50x150x2.00 Galvanized

Block Tie Plain 20x30x150x3.00 Galvanized Block Tie Plain 27x80x150x2.00 Galvanized

Block Tie Plain 20x30x200x3.00 Galvanized Block Tie Plain 30x40x150x2.00 Galvanized

Block Tie Plain 20x30x250x3.00 Galvanized Block Tie Plain 30x40x200x2.00 Galvanized

Block Tie Plain 20x30x255x3.00 Galvanized Block Tie Plain 30x50x190x1.50 Galvanized

Block Tie Plain 25x20x175x2.00 Galvanized Block Tie Plain 30x50x200x1.50 Galvanized

Block Tie Plain 25x30x100x1.50 Galvanized Block Tie Plain 30x50x80x1.20 Galvanized

Block Tie Plain 25x30x150x1.50 Galvanized Block Tie Plain 25x30x150x2.00 SS A4

Block Tie Plain 25x30x150x1.80 Galvanized Block Tie Plain 25x30x150x3.00 SS A4

Block Tie Plain 25x30x150x3.00 Galvanized Block Tie Plain 25x30x200x2.00 SS A4

Block Tie Plain 25x30x175x2.00 Galvanized Block Tie Plain 27x40x120x2.00 SS A4

Block Tie Plain 25x30x200x1.80 Galvanized Block Tie Plain 27x45x125x1.50 SS A4

Block Tie Plain 25x30x200x2.00 Galvanized Block Tie Plain 27x45x125x2.00 SS A4

Block Tie Plain 25x50x120x1.80 Galvanized Block Tie Plain 27x50x150x1.50 SS A4

Block Tie Plain 25x50x200x1.50 Galvanized Block Tie Plain 27x80x150x2.00 SS A4

Block Tie Plain 25x50x250x1.80 Galvanized Block Tie Plain 30x45x150x2.00 SS A4

Block Tie Plain 27x30x120x1.50 Galvanized Block Tie Plain 30x50x150x1.50 SS A4

Block Tie Plain 27x40x120x2.00 Galvanized Block Tie Plain 30x50x190x1.50 SS A4

Block Tie Plain 27x45x125x1.50 Galvanized Block Tie Plain 20x30x250x3.00 SS A6

Block Tie Plain 27x45x125x2.00 Galvanized Block Tie Plain 20x30x255x3.00 SS A6

Block Tie Plain 27x45x140x2.00 Galvanized Block Tie Plain 27x45x125x1.50 SS A6

Block Tie Plain Galvanized Block Tie Plain 40x40x250x3.00 SS A6

27x50x125x2.00

Block Tie Plain 27x50x150x1.50 Galvanized

47
 Block Tie Plain

Dimensions
Description AxBxCxT Material
(mm)

Block Tie Plain 27x80x150x2.00 Galvanized

Block Tie Plain 27x80x150x2.00 Galvanized

Block Tie Plain 30x40x150x2.00 Galvanized

Block Tie Plain 30x40x200x2.00 Galvanized

Block Tie Plain 30x50x190x1.50 Galvanized

Dimensions Block Tie Plain 30x50x200x1.50 Galvanized
Description AxBxCxT Material
(mm) Block Tie Plain 30x50x80x1.20 Galvanized
Block Tie Plain 27x80x150x2.00 Galvanized
Block Tie Plain 25x30x150x2.00 SS A4
Block Tie Plain 20x30x150x3.00 Galvanized
Block Tie Plain 25x30x150x3.00 SS A4
Block Tie Plain 20x30x200x3.00 Galvanized
Block Tie Plain 25x30x150x3.00 SS A4
Block Tie Plain 20x30x250x3.00 Galvanized
Block Tie Plain 25x30x200x2.00 SS A4
Block Tie Plain 20x30x255x3.00 Galvanized
Block Tie Plain 27x40x120x2.00 SS A4
Block Tie Plain 25x20x175x2.00 Galvanized
Block Tie Plain 27x45x125x1.50 SS A4
Block Tie Plain 25x30x100x1.50 Galvanized
Block Tie Plain 27x45x125x2.00 SS A4
Block Tie Plain 25x30x150x1.50 Galvanized
Block Tie Plain 27x50x150x1.50 SS A4
Block Tie Plain 25x30x150x1.80 Galvanized
Block Tie Plain 27x80x150x2.00 SS A4
Block Tie Plain 25x30x150x3.00 Galvanized
Block Tie Plain 27x80x150x2.00 SS A4
Block Tie Plain 25x30x175x2.00 Galvanized
Block Tie Plain 27x80x150x2.00 SS A4
Block Tie Plain 25x30x200x1.80 Galvanized
Block Tie Plain 30x45x150x2.00 SS A4
Block Tie Plain 25x30x200x2.00 Galvanized
Block Tie Plain 30x50x150x1.50 SS A4
Block Tie Plain 25x50x120x1.80 Galvanized
Block Tie Plain 30x50x190x1.50 SS A4
Block Tie Plain 25x50x200x1.50 Galvanized Block Tie Plain 20x30x250x3.00 SS A6
Block Tie Plain 25x50x250x1.80 Galvanized Block Tie Plain 20x30x255x3.00 SS A6
Block Tie Plain 27x30x120x1.50 Galvanized Block Tie Plain 27x45x125x1.50 SS A6
Block Tie Plain 27x40x120x2.00 Galvanized Block Tie Plain 40x40x250x3.00 SS A6
Block Tie Plain 27x45x125x1.50 Galvanized

Block Tie Plain 27x45x125x2.00 Galvanized

Block Tie Plain 27x45x140x2.00 Galvanized

Block Tie Plain 27x50x125x2.00 Galvanized

Block Tie Plain 27x50x150x1.50 Galvanized

Block Tie Plain 27x50x150x2.00 Galvanized

48
Block Tie Fish Tailed

Dimensions
Description AxCxT Material
(mm)
FishTailed 50x200x4.00 Galvanized

FishTailed 40x200x2.00 MS

FishTailed 50x200x3.00 SS A4

FishTailed 25x200x2.00 SS A4

FishTailed 25x200x2.50 SS A4
Dimensions
Description AxCxT Material FishTailed 25x200x3.00 SS A4
(mm)
FishTailed 25x225x2.00 SS A4
FishTailed 25x250x2.00 Galvanized
FishTailed 25x300x2.00 SS A4
FishTailed 25x200x1.50 Galvanized
FishTailed 30x200x1.50 SS A4
FishTailed 25x200x1.80 Galvanized
FishTailed 30x200x2.00 SS A4
FishTailed 25x200x2.00 Galvanized
FishTailed 30x225x2.00 SS A4
FishTailed 25x200x3.00 Galvanized
FishTailed 30x300x2.00 SS A4
FishTailed 25x200x3.00 Galvanized
FishTailed 35x100x1.20 SS A4
FishTailed 25x250x2.00 Galvanized
FishTailed 25x200x2.00 SS A6
FishTailed 25x300x2.00 Galvanized
FishTailed 30x200x2.00 SS A6
FishTailed 30x200x1.50 Galvanized
FishTailed 30x200x2.00 SS A6
FishTailed 30x200x1.80 Galvanized

FishTailed 30x200x2.00 Galvanized

FishTailed 30x220x1.50 Galvanized

FishTailed 30x225x2.00 Galvanized

FishTailed 30x300x2.00 Galvanized

FishTailed 35x100x1.20 Galvanized

FishTailed 50x200x2.00 Galvanized

49
 DOVE TAIL (TWA)

Reference Codes
Each tie will consist of a tail element, for attachment to the facing material, a shank element, and a head element, for
attachment to the structure.

L L L

Fish Tail DCH -/-/30 CCH -/-/10

REF: B/-/-

50
 ADJUSTABLE WALL TIE (AWT)

Device for connecting a masonry leaf across a cavity to another masonry leaf or to a structural frame to resist tension and com-
pression forces while allowing limited differential movement in the plane of the wall.
Wall ties are an important element in the stability of cavity walls. The correct selection, spacing and installation of ties is reco-
mended to avoid damp penetration and cracking of masonry. Wall ties may only be mounted in a horizontal position and in the
plane ( on level) between the masonry leaves of the cavity wall once the mortar has been applied on the block work, the tie
must be embedded in the mortar, cover as well is top with mortar. The tie must be extend in the mortar joints at least 90 mm
in the inner leaf and at least 65 mm in the outer leaf.
Wall ties are further sub classified as asymmetrical or symmetrical.
Wall ties is for us in the external walls, suitable for flat sites where basic wind speed is up to 30 m/s.

Installation of Ties

Wall ties shall be pressed down in and surrounded by fresh mortar.

To ensure cavity wall ties are effective at tying the leaves together they should be installed as the inner leaf is constructed not
simply pushed into a joint.

Ties should be installed with a slight fall to the outer leaf, never towards the inner leaf as this could provide path for moisture
to cross the cavity.

The drip part of the tie should point downwards and be positioned near the Centre of the open cavity.

Installed ties should be clear of mortar droppings to allow the drip to function and prevent water from crossing to the inner
leaf of masonry.

51
 LENGTH OF TIES IN MM TO SUIT CAVITY
Cavity
Section Thick- Length Length Length Length
Reference Position of
Tie Description Size ness 0 - 20 15 - 45 40 -70 65 - 70
Code Drip (min) mm
(mm) (mm) (mm) (mm) (mm) (mm)
1.5
20 2.0
B/P/30 Brick Facing Tie 75 100 150 200
25 2.5
3.0

1.5
20 2.0
B/D/30 Brick Facing Tie 100 150 200 20
25 2.5
3.0

1.5
20 2.0
B/F/30 Brick Facing Tie 150 200 30
25 2.5
3.0

1.5
20 2.0
B/P/21 Brick Facing Tie 75 100 150 200
25 2.5
3.0

1.5
20 2.0
B/D/21 Brick Facing Tie 100 150 200 20
25 2.5
3.0

1.5
20 2.0
B/F/21 Brick Facing Tie 100 150 200 30
25 2.5
3.0

1.5
20 2.0
B/P/28 Brick Facing Tie 75 100 150 200
25 2.5
3.0

1.5
20 2.0
B/D/28 Brick Facing Tie 100 150 200 20
25 2.5
3.0

1.5
20 2.0
B/F/28 Brick Facing Tie 150 200 30
25 2.5
3.0

1.5
20 2.0
B/P/36 Brick Facing Tie 75 100 150 200
25 2.5
3.0

1.5
20 2.0
B/D/36 Brick Facing Tie 100 150 200 20
25 2.5
3.0

1.5
20 2.0
B/F/36 Brick Facing Tie 150 200 30
25 2.5
3.0
Other specified sizes are available upon request.

52
 Cavity
Section Thick- Length Length Length Length
Reference Position of
Tie Description Size ness 0 - 20 15 - 45 40 -70 65 - 70
Code Drip (min) mm
(mm) (mm) (mm) (mm) (mm) (mm)
1.5
20 2.0
B/F/36 Brick Facing Tie 150 200 30
25 2.5
3.0

1.5
30 2.0
B/P/50 Brick Facing Tie 75 100
25 2.5
3.0

1.5
30 2.0
B/D/50 Brick Facing Tie 100
25 2.5
3.0

1.5
30 2.0
B/F/50 Brick Facing Tie
25 2.5
3.0

1.5
30 2.0
B/P/99 Cavity Wall Tie 150 200 250 300
25 2.5
3.0

1.5
30 2.0
B/D/99 Cavity Wall Tie 150 200 250 300
25 2.5
3.0

1.5
30 2.0
B/F/99 Cavity Wall Tie 150 200 250 300
25 2.5
3.0

1.5
30 2.0
C/C/30 Corrug. Strip 150 200 250 300
25 2.5
3.0

1.5
30 2.0
C/C/50 Corrug. Bracket 75 100 150 200
25 2.5
3.0

1.5
2.0
V/W/04 VEE Tie ø 4,5,6 75 100 125 150
2.5
3.0

1.5
Wall Tie An- 30 2.0
B/T/25 75 100 125 150
chor 25 2.5
3.0

1.5
30 2.0
S/S/15 Cavity Wall Tie 150 200 250 300
25 2.5
3.0
Other specified sizes are available upon request.

53
 CAVITY WALL TIE INFORMATION

To comply with: DIN 1053, at least 5 pieces of cavity wall ties should be used per square meter in accordance with DIN 17440,
material of SS. 1.4401 or SS 1.4571.
Three additional wall ties are required for the edges of building.
The distance between the ties should be maximum 500 mm vertically, and not more than750 mm horizontally. The thickness of
the wire tie depends on the height of the building and on the size of the wall cavity.
The minimum thickness is 3 mm. For walls that are higher than 12 m above ground level or where the gaps between the walls
are more than 70 mm to 120 mm, a minimum of 5 wall ties with diameters of 4 mm are to be inserted.

If the gaps between the walls are more than 120 to 150 mm, a minimum of 7 wall ties with diameters of 4 mm or 5 wall ties with
diameters of 5 mm are to be inserted.
The length of the wall tie should be measured in such a way that the anchor is embedded 50 mm into the masonry and a further
25 mm is bent round.

The thickness of the cavity and the thickness of the insulating material shall be added.

54
Cavity Wall Ties
Double Triangle Wall Tie, Butterfly & Three - Hole Wall Tie

Length of Tie and Embedment

Wall Ties should be of the correct length to ensure they are properly embedded in the masonry. The tie should have a minimum
embedment of 50mm in each leaf but also take site tolerances into account for both cavity width and centering of the tie. For
this reason, we suggest tie lengths which achieve an embedment of between 62.5mm and 75mm.
Recomended lengths to suit various cavity widths are shown for masonry-to-masonry wall ties.

Dimensional Standards
Fixed Dimensions
When Specifying ties certain set or minimum dimensions shall be followed, these are described as fixed dimensions and based
on the limitations of material and the production processes.

Where a screw or bolt fixing is to be made a minimum length of 30mm is required.

Lengths
Lengths are generally measured to the extremity of the tie.
For ties fitting into channels the specified length is measured to the shoulder of the tie.

Wire Ties
A range of cavity wall ties are available manufactured in accordance with BS EN 845-1 which supersedes BS 1243. These are
available in stainless steel, pre-galvanized or hot-dip galvanized steel, and to the dimensions shown.

Installation of ties
Wall ties should be pressed down in, and surrounded by, fresh mortar.
To ensure cavity wall ties are effective at tying the leaves together they should be installed as the inner leaf is constructed and
not simply pushed into a joint.
Ties should be installed with a slight fall to the outer leaf, never to wards the inner leaf as this could provide a path for moisture
to cross the cavity.
The drip part of the tie should point downwards and be positioned near the centre of the open cavity.
Installed ties should be clear of mortar droppings to allow the drip to function and prevent water from crossing to the inner
leaf of masonry.

Butterfly

Double Triangle

55
 BUTTERFLY TIE /TRIANGLE TIE
Wire Ties
A range of cavity wall ties are available manufactured in accordance with BS 123:1978. These are available in stainless steel,
pre-galvanized or hot-dip galvanized steel, and to the dimensions shown.

Dimensions Dimensions
Description Material Description Material
(mm) (mm)
Butterfly Tie 30x190x3.00 SS A4 Double Triangle 75x300x4.00 Galvanized

Butterfly Tie 30x190x3.00 SS A4 Double Triangle 65x200x3.00 Galvanized

Butterfly Tie 30x200x1.50 SS A4 Double Triangle 65x200x3.00 Galvanized

Butterfly Tie 75x200x3.00 SS A4 Double Triangle 30x200x4.00 Galvanized

Butterfly Tie 65x200x4.00 SS A4 Double Triangle 65x200x4.00 Galvanized

Butterfly Tie 75x250x3.00 SS A4 Double Triangle 65x250x5.00 SS A4

Butterfly Tie 75x200x3.00 Galvanized Double Triangle 65x300x4.80 SS A4

Butterfly Tie 65x200x4.00 Galvanized Double Triangle 65x250x4.80 SS A4

Double Triangle 50x250x4.80 SS A4

Butterfly Tie 75x200x4.00 Galvanized
Double Triangle 50x250x4.80 SS A4
Butterfly Tie 65x390x4.00 Galvanized
Double Triangle 65x250x4.80 SS A4
Butterfly Tie 65x360x4.00 Galvanized
Double Triangle 65x300x4.80 SS A4
Butterfly Tie 65x150x4.00 Galvanized
Double Triangle 65x250x4.80 SS A4
Butterfly Tie 65x250x4.00 Galvanized
Double Triangle 120X50X5.00 SS A4
Butterfly Tie 75x300x4.00 Galvanized
Double Triangle 65x200x4.00 SS A4

Double Triangle 80x250x5.00 SS A4

Dimensions
Description Material Double Triangle 65x150x4.00 SS A4
(mm)
Double Triangle 50x250x4.80 Galvanized Double Triangle 65x250x4.00 SS A4

Double Triangle 65x250x4.80 Galvanized Double Triangle 65x200x3.00 SS A4

Double Triangle 65x300x4.80 Galvanized

Double Triangle 50x250x4.80 Galvanized

Double Triangle 65x250x4.80 Galvanized

Double Triangle 65x300x4.80 Galvanized

Double Triangle 65x250x4.80 Galvanized

Double Triangle 65x300x4.80 Galvanized

Double Triangle 120X50X5.00 Galvanized

Double Triangle 80x250x4.80 Galvanized

Double Triangle 65x200x4.00 Galvanized

Double Triangle 75x250x4.00 Galvanized

56
 ARRANGEMENT OF ADDITIONAL TIE CRAMPS
For walls in which both leaves are 90mm or thicker, ties should be used at not less than 2.5 per square meter (900mm horizontal
and 450mm vertical centers). This spacing may be varied by building regulations.

Ties should be evenly distributed over the wall area, except around openings, and should be preferable staggers.

At vertical edges of an opening, unreturned or unbounded edges, and vertical expansion joints, additional ties should be used.
Such ties should be located at 300 mm vertical centers, positioned not more than 225 mm from the edge.

3 pieces wall ties per meter, additional ties should be installed:

- At edge ( corner )
- Along expansion joints
- At opening
- At the upper end

57
 Cavity Tie Corrugated

Dimensions
Description AxCxT Material
(mm)
Cavity Tie Corrugated 25x200x2.00 Galvanized

Cavity Tie Corrugated 25x200x3.00 Galvanized

Cavity Tie Corrugated 30x200x1.50 Galvanized

Cavity Tie Corrugated 25x200x2.00 AA S4

Cavity Tie Corrugated 30x200x1.50 AA S4

Cavity Tie Corrugated 30x250x2.00 AA S4

Cavity Tie Corrugated 40x250x2.00 AA S4

Cavity Tie Corrugated 25x200x3.00 AA S6

Cavity Tie Corrugated 25x200x3.00 AA S6

Cavity Tie With 3Holes

Dimensions
Description AxCxT Material
(mm)
Cavity Tie with 3 Holes 20x200x3.00 Galvanized

Cavity Tie with 3 Holes 20x255x3.00 Galvanized

Cavity Tie with 3 Holes 20x255x3.00 Galvanized

Cavity Tie with 3 Holes 25x200x1.80 Galvanized

Cavity Tie with 3 Holes 25x200x2.00 Galvanized

Cavity Tie with 3 Holes 25x250x2.00 Galvanized

Cavity Tie with 3 Holes 30x300x1.50 Galvanized

Cavity Tie with 3 Holes 30x300x1.50 Mild Steel

Cavity Tie with 3 Holes 25x200x2.00 AA S4

58
Cavity Tie Fish Tailed

Dimensions Dimensions
Description AxCxT Material Description AxCxT Material
(mm) (mm)
Cavity Tie Fish Tailed 25x250x2.00 Galvanized Cavity Tie Fish Tailed 50x200x3.00 AA S4

Cavity Tie Fish Tailed 25x200x1.50 Galvanized Cavity Tie Fish Tailed 25x200x2.00 AA S4

Cavity Tie Fish Tailed 25x200x1.80 Galvanized Cavity Tie Fish Tailed 25x200x2.50 AA S4

Cavity Tie Fish Tailed 25x200x2.00 Galvanized Cavity Tie Fish Tailed 25x200x3.00 AA S4

Cavity Tie Fish Tailed 25x200x3.00 Galvanized Cavity Tie Fish Tailed 25x225x2.00 AA S4

Cavity Tie Fish Tailed 25x200x3.00 Galvanized Cavity Tie Fish Tailed 25x300x2.00 AA S4

Cavity Tie Fish Tailed 25x250x2.00 Galvanized Cavity Tie Fish Tailed 30x200x1.50 AA S4

Cavity Tie Fish Tailed 25x300x2.00 Galvanized Cavity Tie Fish Tailed 30x200x2.00 AA S4

Cavity Tie Fish Tailed 30x200x1.50 Galvanized Cavity Tie Fish Tailed 30x225x2.00 AA S4

Cavity Tie Fish Tailed 30x200x1.80 Galvanized Cavity Tie Fish Tailed 30x300x2.00 AA S4

Cavity Tie Fish Tailed 30x200x2.00 Galvanized Cavity Tie Fish Tailed 35x100x1.20 AA S4

Cavity Tie Fish Tailed 30x220x1.50 Galvanized Cavity Tie Fish Tailed 25x200x2.00 AA S4

Cavity Tie Fish Tailed 30x225x2.00 Galvanized Cavity Tie Fish Tailed 30x200x2.00 AA S4

Cavity Tie Fish Tailed 30x300x2.00 Galvanized Cavity Tie Fish Tailed 30x200x2.00 AA S4

Cavity Tie Fish Tailed 35x100x1.20 Galvanized

Cavity Tie Fish Tailed 50x200x2.00 Galvanized

Cavity Tie Fish Tailed 50x200x4.00 Galvanized

Cavity Tie Fish Tailed 40x200x2.00 Mild Steel

59
 DEBONDING CAVITY BLOCK TIE

Specifications:
Debonding Block Tie are manufactured from the following:
A. Galvanized Steel Sheet: BS 2989, ASTM A 653M, Commercial Steel, Z 180 zinc coating.
B. Stainless Steel Sheet: ASTM A 666, Type 304/Type 316.
A
T

B Ø

Rubber Sleeve
C

Dimensions
Description AxBxCxT Material
(mm)
Debonding Cavity 25x30x300x1.50 Galvanized

Debonding Cavity 25x30x300x3.00 Galvanized

Debonding Cavity 25x30x75x1.50 Galvanized

Debonding Cavity 25x30x75x3.00 Galvanized

Debonding Cavity 30x40x300x1.50 Galvanized

Debonding Cavity 30x40x300x3.00 Galvanized

Debonding Cavity 30x40x75x1.50 Galvanized

Debonding Cavity 30x40x75x3.00 Galvanized

Debonding Cavity 25x150x1.50 Galvanized

Debonding Cavity 25x300x1.50 Galvanized

Debonding Cavity 25x300x3.00 Galvanized

Debonding Cavity 25x30x300x1.50 AA S4

Debonding Cavity 25x30x300x3.00 AA S4

Debonding Cavity 25x30x75x1.50 AA S4

Debonding Cavity 25x30x75x3.00 AA S4

Debonding Cavity 30x40x300x1.50 AA S4

Debonding Cavity 30x40x300x3.00 AA S4

Debonding Cavity 30x40x75x1.50 AA S4

Debonding Cavity 30x40x75x3.00 AA S4

60
 DEBONDING CONTROL JOINTS FLAT TIE
Specifications:
SFSP Debonding Control Joints Tie are manufactured from the following: A
A. Galvanized Steel Sheet: BS 2989, ASTM A 653M, Commercial Steel, Z 180 zinc T
coating.
B. Stainless Steel Sheet: ASTM A 666, Type 304/Type 316. B

Dimensions
Description AxBxT Material
(mm)
Debonding Control Joint Flat Tie 25x150x1.5 GI (Galvanized Steel)
Debonding Control Joint Flat Tie 25x300x1.5 GI (Galvanized Steel)
Debonding Control Joint Flat Tie 25x150x3.0 GI (Galvanized Steel)
Debonding Control Joint Flat Tie 25x300x3.0 GI (Galvanized Steel)
Debonding Control Joint Flat Tie 30x150x1.5 GI (Galvanized Steel)
Debonding Control Joint Flat Tie 30x300x1.5 GI (Galvanized Steel)
Debonding Control Joint Flat Tie 30x150x3.0 GI (Galvanized Steel)
Debonding Control Joint Flat Tie 30x150x3.0 GI (Galvanized Steel)
Debonding Control Joint Flat Tie 25x150x1.5 SS A2/A4 (Stainless Steel)
Debonding Control Joint Flat Tie 25x300x1.5 SS A2/A4 (Stainless Steel)
Debonding Control Joint Flat Tie 25x150x3.0 SS A2/A4 (Stainless Steel)
Debonding Control Joint Flat Tie 25x300x3.0 SS A2/A4 (Stainless Steel)
Debonding Control Joint Flat Tie 30x150x1.5 SS A2/A4 (Stainless Steel)
Debonding Control Joint Flat Tie 30x300x1.5 SS A2/A4 (Stainless Steel)
Debonding Control Joint Flat Tie 30x150x3.0 SS A2/A4 (Stainless Steel)
Debonding Control Joint Flat Tie 30x300x3.0 SS A2/A4 (Stainless Steel)

HAMMER-ON SECTION
Available in five sizes to accommodate a steel thickness from 7mm to
25mm, this fixing is simply hammered onto the flange. It can be utilised
either on a column with a tie or on a beam with an internal head restraint.

The Hammer-On Section resists load in one direction only and should be
installed on alternate sides of the flange.
Hammer-On Ties should be installed at 225mm vertical centres and Hammer-On Ties installed to alternate sides of
Hammer-On Head Restraints at 450mm horizontal centres. The wall tie the column at 225mm vertical centres
or head restraint should be positioned central to the masonry leaf when
located in one of the five fixing slots.
Hammer-On Tie (Debonded HOS-TIE, pictured above, supplied complete
with Hammer-On Section)
Hammer-On Ties can resist a load of 900N. When fixed at 225mm vertical
centres, staggered on alternate sides of the column flange (effective
centres 450mm on each side) the service load will be 2kN per metre in
either direction.

61
 R2-TYPE WIRE TIE
Stainless steel wall tie manufactured in accordance with BS EN 845-1
- Diameter = 4mm, 5mm
Other sizes can be manufactured upon request

Dimensions
Description Material
(mm)

Wire Tie -Tie Drip 65x150x5.00 GI (Galvanized Steel)

Wire Tie -Tie Drip 65x200x5.00 GI (Galvanized Steel)
Wire Tie -Tie Drip 65x200x4.00 GI (Galvanized Steel)
Wire Tie -Tie Drip 65x250x4.00 GI (Galvanized Steel)
Wire Tie -Tie Drip 65x300x4.00 GI (Galvanized Steel)
Wire Tie -Tie Drip 50x200x4.00 SS A4 (Stainless Steel)
Wire Tie -Tie Drip 65x150x5.00 SS A4 (Stainless Steel)
Wire Tie -Tie Drip 65x200x5.00 SS A4 (Stainless Steel)
Wire Tie -Tie Drip 65x250x4.0 SS A4 (Stainless Steel)
Wire Tie -Tie Drip 65x300x4.00 SS A4 (Stainless Steel)

62
 Z- TYPE WIRE TIE
-“Z” Wire Tie is used for tying masonry to masonry ( Composite Wall Only ).
-Not used in walls with air space and or insulation.
- Diameter = 4mm, 5mm
Other sizes can be manufactured upon request

Dimensions
Description Material
(mm)

Z-Type Wire Tie 65x200x3.00 GI (Galvanized Steel)

Z-Type Wire Tie 50x100x5.00 GI (Galvanized Steel)
Z-Type Wire Tie 65x200x4.0 GI (Galvanized Steel)

63
 CEILING TYPE

Adjustable Head Restraint (AHR)

Head Restraints
Head Restraints provide the necessary restraint to the
top of masonry walls. They allow for vertical movement to
accommodate shrinkage or thermal movement of the wall or
structural frame, while restraining wind loads.

Internal Head Restraint

The Internal Head is used for restraining the top of internal
walls or the top of the inner leaf of a cavity wall.

The opening at the front of the channel stem is sealed to

prevent mortar ingress and to ensure that vertical movement
can take place between the block work and the structure.

The base of the stem must be built within a bed joint with the
centre of the stem no closer than 50mm from the edge of the
block.

The vertical joint should be filled with mortar each side of the
stem.

The maximum joint between the top of the block work and the
underside of the frame is not normally greater than 25mm.

The standard of head restraint will suit a 215mm high block

and can resist a load of 1.5kN*.

Where the gap at the top increases from 25mm to 50mm, the
working load is reduced from 1.5kN to 1.0kN.
with Slot

with Hole

64
 Dimensions
Description Material
(mm)
Adjustable Head Restraint 30x110x200x1.20 GI (Galvanized Steel)
Adjustable Head Restraint 30x140x200x1.20 GI (Galvanized Steel)
Adjustable Head Restraint 30x40x200x1.20 GI (Galvanized Steel)
Adjustable Head Restraint 30x80x150x1.20 GI (Galvanized Steel)
Adjustable Head Restraint 30x80x150x1.20 GI (Galvanized Steel)
Adjustable Head Restraint 30x80x190x1.20 GI (Galvanized Steel)
Adjustable Head Restraint 30x80x200x1.20 GI (Galvanized Steel)
Adjustable Head Restraint 30x90x200x1.20 GI (Galvanized Steel)
Adjustable Head Restraint 30x95x200x1.20 GI (Galvanized Steel)
Adjustable Head Restraint 30x95x200x1.50 GI (Galvanized Steel)
Adjustable Head Restraint 30x200x1.20 GI (Galvanized Steel)
Adjustable Head Restraint 30x110x200x1.20 SS A4 (Stainless Steel)
Adjustable Head Restraint 30x140x200x1.20 SS A4 (Stainless Steel)
Adjustable Head Restraint 30x80x150x1.20 SS A4 (Stainless Steel)
Adjustable Head Restraint 30x80x190x1.20 SS A4 (Stainless Steel)
Adjustable Head Restraint 30x80x200x1.20 SS A4 (Stainless Steel)
Adjustable Head Restraint 30x90x200x1.20 SS A4 (Stainless Steel)
Adjustable Head Restraint 30x80x190x1.20 SS A4 (Stainless Steel)
Adjustable Head Restraint 50X22X110X60X3.0 Hot Dip Galvanized
Adjustable Head Restraint with Sleeve 25x30x100x1.5-30x200x1.2 GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 27x40x120x2-30x200x90x1.2 GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 27x45x125x1.5-30x80x190x1.2 GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 27x45x125x2-30x80x150x1.2 GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 27x80x150x2-30x100x200x1.2 GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 27x80x150x2-30x140x200x1.2 GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 30X40X200X1.2-30X50X150X1.5 GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 27X45X125X2 30X80X190X1.2 GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 27X45X125X2 30X80X200X1.2 GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 27X50X125 30X80X190X1.2MM GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 27x40x120x2-30x200x90x1.2 SS A4 (Stainless Steel)
Adjustable Head Restraint with Sleeve 30x80x150x1.2 tie 30x45x150x2.0 SS A4 (Stainless Steel)
Adjustable Head Restraint with Sleeve 27x45x125x1.5-30x80x190x1.2 SS A2 (Stainless Steel)
Adjustable Head Restraint with Sleeve 30X80X190X1.2-27X45X125X1.5 SS A2 (Stainless Steel)
Adjustable Head Restraint with Sleeve 27X45X125X2 - 30X80X190X1.2 SS A2 (Stainless Steel)
Adjustable Head Restraint with Sleeve 30X200X140X1.2-27X45X125X2.0 SS A2 (Stainless Steel)
Adjustable Head Restraint with Sleeve 30X200X110X1.2-27X80X150X2.0 SS A2 (Stainless Steel)
Adjustable Head Restraint with Sleeve 30X200X80X1.2-27X45X125X2.0 SS A2 (Stainless Steel)
Adjustable Head Restraint with Sleeve 30X200X110X1.2-27X80X150X2.0 GI (Galvanized Steel)
Adjustable Head Restraint with Sleeve 30X200X110X1.2MM-27X80X150X2.0 Hot Dip Galvanized

65
Partition Top Angle (PTA)

Angle Support
- Partition Top angle prevents a horizontal movement of the masonry wall.
- Supports the horizontal force on top of the block work due to human impact
or wind pressure.
- To be fixed on both sides of the wall.
- To be fixed with 2x M6 Screw with plastic anchor.
- Provides support while preventing a solid connection between the wall and
the ceiling.

100

Ceiling

Angle Support
100

Lenght: 100-300mm
Thickness: 3 - 6 mm

66
 Dimensions
Description Material
(mm)
Block Tie 25x75x200x1.80 GI (Galvanized Steel)
Block Tie 30x75x250x2.00 GI (Galvanized Steel)
Block Tie 30x75x250x2.00 SS A4 (Stainless Steel)

Compressible joint filler

Reinforced Slab

Paritition top angle L 60x60x4mm Paritition top angle L 60x60x4mm

width 300mm at 1500mm o.c width 300mm at 1500mm o.c

Block Work

100 - 300 200 - 600 100 - 300 200 - 600 100 - 300

67
 PARTITION TOP ROD ANCHORS (PTRA)

Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit
vertical deflection of the slab above, without transferring compressive loads to the masonry wall below. Partition Top Anchors
are suitable for construction using steel.
Partition Top Anchors Tube with expansion filler is placed over rod anchor, which has been attached to concrete or steel by any
of the methods illustrated.

Materials:
ASTM A 1008 (cold- rolled )
ASTM A1011 (Hot-rolled )

Finishes:
Hot Dip Galvanized –ASTM A153
ROD
Hot-Dip Galvanized ASTM A153
Plastic Tube : Manufactured from UPVC according
to ASTM D542 and D696,D257

Ceiling

2.5 cm

Stiffener (Column)
150
mm
30mm

Thickness:
4.0 - 6.0 mm
m
m
250
Hole ø 8 mm
0-
15
PVC Sleave

Filler
ø 20mm

68
Partition Top Anchors have been developed to provide Finishes:
lateral shear resistance at the upper limit of masonry
walls. Sheet Metal:
Hot-Dip Galvanized - ASTM A153/A153M-B2 class B (sheet
They permit vertical deflection of the slab above, with- metal ties and anchors hot-dip galvanized after fabrication)
out transferring compressive loads to the masonry wall
below. Sheet Metal (Stainless Steel):
ASTM A167 - AISI Type 304 Stainless Steel (sheet metal ties
PTA are suitable for construction using steel or concrete. and anchors) (Yype 316 available on special order)

PTA Tube with expansion filler is placed over rod anchor, Rod:
which has been attached to concrete or steel by any of Hot-Dip Galvanized - ASTM A153/A153M-B2 Stainless Steel
the methods illustrated. Type 304 - ASTM A582/A582MPTA Tube: Manufactured from
Clear Butyrate.

Dimensions:
- Rod 9.5 mm lenght 150mm Other diameters and gauges
available
- Plate 50 x 75mm thickness 2.5mm

69
 SURE - TIE FOR STEEL

Sure-Tie quickly and accurately pierces insulation and/or wallboard to abut steel/studs in
brick veneer applications.

- One-piece design provides superior strength.

- 12-24 Self Driller.
- Accommodates 1/2“ and 5/8“ wall board and various thicknesses of insulation.
- Silver-Gray Climaseal® finish resulted in 0% red rust at 1000 hours exposure to ASTM
B-117 salt spray testing.

Triangle Wire Tie Seismic Wire Tie Single Wire Tie

Seismic Anchor System Stud Anchor

Stud

Anchorseal

Anchor

Wallboard

70
 REBAR POSITIONERS

Rebar Postioners
RB Rebar Positioners are for positioning and stabilizing rebars installed into concrete block cores in reinforced masonry.

TWIN Rebar Postioners

TWIN Rebar Positioners are similar to the standard RB model but with double loops to hold 4 rebars.

71
 BLOCK WALL
REINFORCEMENT
BLOCK LADDER
REINFORCEMENT
SFSP ladder and truss types are used for the reinforcement of brick and block masonry to give improved tensile
strength to walls subjected to lateral loading e.g. wind and seismic.

SFSP block reinforcements reduces the risk of cracking either at stress concentration around opening. Calculations
are provided by our design office in Stuttgart, Germany.

SPECIFICATIONS

SFSP reinforcement truss type are manufactured by resistance welding of ASTM A82 cold drawn steel wire deformed
at predetermined centers conforming to BS 4483:2005.

DIMENSIONS

• Hot-dip galvanized.
- Main wire diameter = 4.0 mm 4.8 mm
- Rung and diagonal wire diameter = 4.0 mm 4.8 mm
- Rung wire centers = 400 mm

• Stainless steel AISI 304

- Main wire diameter = 4.0 mm 4.8 mm
- Rung and diagonal wire diameter = 4.0 mm 4.8 mm
- Round wire centers = 400 mm

The production of cold reduced steel wires complies to BS 4483:2005 and ASTM A951 / A951M - 11 Standard
Specification for Steel Wire for Masonry Joint Reinforcement

a) Mechanical Properties
- Specified characteristic strength: 460 N/mm2 (Mpa)
- Tensile strength min 510 N/mm2 (Mpa)

b) Chemical composition of steel

- Carbon C max. 0,25 %, Sulphur S:max 0.06 %
- Carbon equivalent value Ceq: max 0.4 %, Ceq=C+Mn/6+ (Cr + V + Mo)/5+ (Cu x Ni)/15

SFSP Block ladder (Ladder type and Truss type) are continuous lengths of joint reinforcement that are embedded into
the horizontal joints of masonry walls.

Block reinforcement offers the following benefits:

- Increases lateral flexural strength.
- Reduces cracking that can arise from thermal stresses.
- Bonds exterior and interior masonry withes together in composite or cavity walls.
- Bonds masonry at intersecting walls and corners.
- Increases performance of masonry wall under various stresses

74
75
 LADDER TYPE
Dimensions Length
Description Type Material
(mm) (mm)
Block Ladder - Ladder Type T Shape 100x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type T Shape 150x4.0/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type T Shape 150x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type T Shape 175x4.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type T Shape 200x4.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type T Shape 200x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type T Shape 225x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type T Shape 250x4.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type Overlap 250x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type T Shape 50x4.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type T Shape 50x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type T Shape 75x4.00/400 3000 GI (Galvanized Steel)
Block Ladder - Ladder Type Overlap 100x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 100x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 100x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 100x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 150x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 150x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 150x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 150x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 175x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 175x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 200x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 200x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 200x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 200x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 225x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 225x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 250x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 250x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 250x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 250x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 50x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 50x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 50x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 50x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 75x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 75x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type T Shape 50x4.00/400 3000 Hot Dip Galvanized

76
 Dimensions Length
Description Type Material
(mm) (mm)
Block Ladder - Ladder Type Overlap 100x4.0/400 3000 Hot Dip Galvanized
Block Ladder - Ladder Type Overlap 100x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type Overlap 100x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type T Shape 150x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type T Shape 150x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type Overlap 200x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type T Shape 200x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type T Shape 200x5.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type T Shape 250x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type Overlap 50x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type T Shape 50x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type T Shape 50x5.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Truss Type T Shape 100x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Truss Type T Shape 100x5.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Truss Type T Shape 150x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Truss Type T Shape 200x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Truss Type T Shape 200x5.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Truss Type T Shape 250x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Truss Type T Shape 250x5.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Truss Type T Shape 50x4.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Truss Type T Shape 50x5.00/400 3000 SS A4 (Stainless Steel)
Block Ladder - Ladder Type Overlap 100x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type T Shape 100x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type Overlap 150x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type T Shape 150x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type Overlap 150x5.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type Overlap 200x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type T Shape 200x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type Overlap 200x5.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type Overlap 250x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type Overlap 50x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type T Shape 50x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Ladder Type Overlap 50x5.00/400 3000 SS A6 (Stainless Steel)

77
Accessories
Dimensions
Description Type Material
(mm)
Bends, Tee-branches, and intersections
Ladder 90D - Accessory Overlap 100x4.00/400 GI (Galvanized Steel)
can be manufactured upon request.
Corner units provide continuit y of Ladder 90D - Accessory Overlap 100x5.00/400 GI (Galvanized Steel)
reinforcement this can be cut and bent Ladder 90D - Accessory Overlap 150x400/400 GI (Galvanized Steel)
on site.
Ladder 90D - Accessory Overlap 150x500/400 GI (Galvanized Steel)

Ladder 90D - Accessory Overlap 200x4.00/400 GI (Galvanized Steel)

Ladder 90D - Accessory Overlap 200x5.00/400 GI (Galvanized Steel)

Ladder 90D - Accessory Overlap 250x4.00/400 GI (Galvanized Steel)

L - Junction
Ladder Ladder 90D - Accessory Overlap 250x5.00/400 GI (Galvanized Steel)

Ladder 90D - Accessory Overlap 50x4.00/400 GI (Galvanized Steel)

Ladder 90D - Accessory Overlap 50x5.00/400 GI (Galvanized Steel)

Ladder 90D - Accessory Overlap 100x4.00/400 Hot Dip Galvanized

Ladder 90D - Accessory Overlap 100x5.00/400 Hot Dip Galvanized

Ladder 90D - Accessory Overlap 150x400/400 Hot Dip Galvanized

Ladder 90D - Accessory Overlap 150x500/400 Hot Dip Galvanized

Ladder 90D - Accessory Overlap 200x4.00/400 Hot Dip Galvanized

Ladder 90D - Accessory Overlap 200x5.00/400 Hot Dip Galvanized

Ladder 90D - Accessory Overlap 250x4.00/400 Hot Dip Galvanized

Ladder 90D - Accessory Overlap 250x5.00/400 Hot Dip Galvanized

Ladder 90D - Accessory Overlap 50x4.00/400 Hot Dip Galvanized

Ladder 90D - Accessory Overlap 50x5.00/400 Hot Dip Galvanized

Ladder 90D - Accessory Overlap 100x4.00/400 SS A4 (Stainless Steel)

Ladder 90D - Accessory Overlap 100x5.00/400 SS A4 (Stainless Steel)

Ladder 90D - Accessory Overlap 150x400/400 SS A4 (Stainless Steel)

Ladder 90D - Accessory Overlap 150x500/400 SS A4 (Stainless Steel)

Ladder 90D - Accessory Overlap 200x4.00/400 SS A4 (Stainless Steel)

Ladder 90D - Accessory Overlap 200x5.00/400 SS A4 (Stainless Steel)

Ladder 90D - Accessory Overlap 250x4.00/400 SS A4 (Stainless Steel)

Ladder 90D - Accessory Overlap 250x5.00/400 SS A4 (Stainless Steel)

Ladder 90D - Accessory Overlap 50x4.00/400 SS A4 (Stainless Steel)

Ladder 90D - Accessory Overlap 50x5.00/400 SS A4 (Stainless Steel)

Ladder 90D - Accessory Overlap 100x4.00/400 SS A6 (Stainless Steel)

Ladder 90D - Accessory Overlap 100x5.00/400 SS A6 (Stainless Steel)

Ladder 90D - Accessory Overlap 150x400/400 SS A6 (Stainless Steel)

Ladder 90D - Accessory Overlap 150x500/400 SS A6 (Stainless Steel)

Ladder 90D - Accessory Overlap 200x4.00/400 SS A6 (Stainless Steel)

Ladder 90D - Accessory Overlap 200x5.00/400 SS A6 (Stainless Steel)

Ladder 90D - Accessory Overlap 250x4.00/400 SS A6 (Stainless Steel)

Ladder 90D - Accessory Overlap 250x5.00/400 SS A6 (Stainless Steel)

Ladder 90D - Accessory Overlap 50x4.00/400 SS A6 (Stainless Steel)

Ladder 90D - Accessory Overlap 50x5.00/400 SS A6 (Stainless Steel)

78
 Dimensions
Description Type Material
(mm)

Equal T-Branch - Accessory Overlap 100x4.00/400 GI (Galvanized Steel)

Equal T-Branch - Accessory Overlap 100x5.00/400 GI (Galvanized Steel)

Equal T-Branch - Accessory Overlap 150x400/400 GI (Galvanized Steel)

Equal T-Branch - Accessory Overlap 150x500/400 GI (Galvanized Steel)

T - Junction
Equal T-Branch - Accessory Overlap 200x4.00/400 GI (Galvanized Steel) Ladder
Equal T-Branch - Accessory Overlap 200x5.00/400 GI (Galvanized Steel)

Equal T-Branch - Accessory Overlap 250x4.00/400 GI (Galvanized Steel)

Equal T-Branch - Accessory Overlap 250x5.00/400 GI (Galvanized Steel)

Equal T-Branch - Accessory Overlap 50x4.00/400 GI (Galvanized Steel)

Equal T-Branch - Accessory Overlap 50x5.00/400 GI (Galvanized Steel)

Equal T-Branch - Accessory Overlap 100x4.00/400 SS A4 (Stainless Steel)

Equal T-Branch - Accessory Overlap 100x5.00/400 SS A4 (Stainless Steel)

Equal T-Branch - Accessory Overlap 150x400/400 SS A4 (Stainless Steel)

Equal T-Branch - Accessory Overlap 150x500/400 SS A4 (Stainless Steel)

Equal T-Branch - Accessory Overlap 200x4.00/400 SS A4 (Stainless Steel)

Equal T-Branch - Accessory Overlap 200x5.00/400 SS A4 (Stainless Steel)

Equal T-Branch - Accessory Overlap 250x4.00/400 SS A4 (Stainless Steel)

Equal T-Branch - Accessory Overlap 250x5.00/400 SS A4 (Stainless Steel)

Equal T-Branch - Accessory Overlap 50x4.00/400 SS A4 (Stainless Steel)

Equal T-Branch - Accessory Overlap 50x5.00/400 SS A4 (Stainless Steel)

Equal T-Branch - Accessory Overlap 100x4.00/400 SS A6 (Stainless Steel)

Equal T-Branch - Accessory Overlap 100x5.00/400 SS A6 (Stainless Steel)

Equal T-Branch - Accessory Overlap 150x400/400 SS A6 (Stainless Steel)

Equal T-Branch - Accessory Overlap 150x500/400 SS A6 (Stainless Steel)

Equal T-Branch - Accessory Overlap 200x4.00/400 SS A6 (Stainless Steel)

Equal T-Branch - Accessory Overlap 200x5.00/400 SS A6 (Stainless Steel)

Equal T-Branch - Accessory Overlap 250x4.00/400 SS A6 (Stainless Steel)

Equal T-Branch - Accessory Overlap 250x5.00/400 SS A6 (Stainless Steel)

Equal T-Branch - Accessory Overlap 50x4.00/400 SS A6 (Stainless Steel)

Equal T-Branch - Accessory Overlap 50x5.00/400 SS A6 (Stainless Steel)

Equal T-Branch - Accessory Overlap 100x4.00/400 Hot Dip Galvanized

Equal T-Branch - Accessory Overlap 100x5.00/400 Hot Dip Galvanized

Equal T-Branch - Accessory Overlap 150x400/400 Hot Dip Galvanized

Equal T-Branch - Accessory Overlap 150x500/400 Hot Dip Galvanized

Equal T-Branch - Accessory Overlap 200x4.00/400 Hot Dip Galvanized

Equal T-Branch - Accessory Overlap 200x5.00/400 Hot Dip Galvanized

Equal T-Branch - Accessory Overlap 250x4.00/400 Hot Dip Galvanized

Equal T-Branch - Accessory Overlap 250x5.00/400 Hot Dip Galvanized

Equal T-Branch - Accessory Overlap 50x4.00/400 Hot Dip Galvanized

Equal T-Branch - Accessory Overlap 50x5.00/400 Hot Dip Galvanized

79
 TRUSS TYPE

Dimensions Length
Description Type Material
(mm) (mm)

Block Ladder - Truss Type T-Shape 100x4.00/400 3000 GI (Galvanized Steel)

Block Ladder - Truss Type T-Shape 100x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Truss Type T-Shape 150x4.00/400 3000 GI (Galvanized Steel)
Block Ladder - Truss Type T-Shape 150x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Truss Type T-Shape 200x4.00/400 3000 GI (Galvanized Steel)
Block Ladder - Truss Type T-Shape 200x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Truss Type T-Shape 250x4.00/400 3000 GI (Galvanized Steel)
Block Ladder - Truss Type T-Shape 250x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Truss Type T-Shape 50x4.00/400 3000 GI (Galvanized Steel)
Block Ladder - Truss Type T-Shape 50x5.00/400 3000 GI (Galvanized Steel)
Block Ladder - Truss Type T-Shape 100x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 100x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 150x400/400 3000 Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 150x500/400 3000 Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 200x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 200x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 250x4.00/400 3000 Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 250x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 50x5.00/400 3000 Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 150x400/400 3000 MS Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 200x4.00/400 3000 MS Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 250x4.00/400 3000 MS Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 50x4.00/400 3000 MS Hot Dip Galvanized
Block Ladder - Truss Type T-Shape 75x4.00/400 3000 MS Hot Dip Galvanized
Block Ladder - Truss Type Overlap 100x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Truss Type T-Shape 100x5.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Truss Type T-Shape 150x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Truss Type T-Shape 150x5.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Truss Type T-Shape 200x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Truss Type T-Shape 200x5.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Truss Type T-Shape 250x4.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Truss Type T-Shape 250x5.00/400 3000 SS A6 (Stainless Steel)
Block Ladder - Truss Type T-Shape 50x400/400 3000 SS A6 (Stainless Steel)

80
81
Accessories
Bends, Tee-branches, and intersections can be manufactured upon request.
Corner units provide continuity of reinforcement this can be cut and bent on site.
L - Junction
Dimensions Truss
Description Type Material
(mm)

90D - Truss Accessory T-Shape 100x4.00/400 GI (Galvanized Steel)

90D - Truss Accessory T-Shape 150x4.00/400 GI (Galvanized Steel)
90D - Truss Accessory T-Shape 200x4.00/400 GI (Galvanized Steel)
90D - Truss Accessory T-Shape 50x4.00/400 GI (Galvanized Steel)
90D - Truss Accessory T-Shape 150x4.00/400 MS Hot Dip Galvanized
90D - Truss Accessory T-Shape 50x4.00/400 MS Hot Dip Galvanized

Dimensions
Description Type Material
(mm)
Equal Tee - Truss Accessory Overlap 100x4.00/400 Hot Dip Galvanized
Equal Tee - Truss Accessory Overlap 100x5.00/400 Hot Dip Galvanized
Equal Tee - Truss Accessory Overlap 150x4.00/400 Hot Dip Galvanized
Equal Tee - Truss Accessory Overlap 150x5.00/400 Hot Dip Galvanized
Equal Tee - Truss Accessory Overlap 200x4.00/400 Hot Dip Galvanized
T - Junction
Truss
Equal Tee - Truss Accessory Overlap 200x5.00/400 Hot Dip Galvanized
Equal Tee - Truss Accessory Overlap 250x4.00/400 Hot Dip Galvanized
Equal Tee - Truss Accessory Overlap 250x5.00/400 Hot Dip Galvanized
Equal Tee - Truss Accessory Overlap 50x4.00/400 Hot Dip Galvanized
Equal Tee - Truss Accessory Overlap 50x5.00/400 Hot Dip Galvanized
Equal Tee - Truss Accessory T-Shape 100x4.00/400 GI (Galvanized Steel)
Equal Tee - Truss Accessory T-Shape 150x4.00/400 GI (Galvanized Steel)
Equal Tee - Truss Accessory Overlap 150x5.00/400 GI (Galvanized Steel)
Equal Tee - Truss Accessory T-Shape 200x4.00/400 GI (Galvanized Steel)

PULLOUT BOX
The GI Pullout Box is supplied in retainer boxes made from galvanized sheet steel, for the reliable transmission of
shear forces. The GI Pullout Box, designed to ensure the exact distance between rods, in which the holes are made
slightly bigger than the rod diameter.
Material Used: Galvanized sheet, different zinc coatings.
Gi Pullout Box Length: 1.2m, 2.44m, 3m (other length can be manufactured upon request.)
Gi Pullout Box Width: 100mm – 400mm (other widths, smaller or larger can be arranged.)
Hole Diameter: 10mm – 25mm (other punching required, can be done.)
Material Thickness: 0.4mm – 1.5mm as standard (other thicknesses can be manufactured upon request)
Covers: According to the requirements.

82
 Dimensions
Description Material
(mm)
Pull Out Bar Box 200x30-30x0.80x1200 GI (Galvanized Steel)
Pull Out Bar Box 200x30-30x0.80x1200 GI (Galvanized Steel)
Pull Out Bar Box 200x30-30x0.80x1200 GI (Galvanized Steel)
Pull Out Bar Box 200x35-35x0.70x1000 GI (Galvanized Steel)
Pull Out Bar Box 200x35-35x0.70x1200 GI (Galvanized Steel)
Pull Out Bar Box 200x35-35x0.80x1000 GI (Galvanized Steel)
Pull Out Bar Box 200x35-35x0.80x1200 GI (Galvanized Steel)
Pull Out Bar Box 200x40-40x0.70x2400 GI (Galvanized Steel)
Pull Out Bar Box 215x40-40x0.70x2400 GI (Galvanized Steel)
Pull Out Bar Box 250x35-35x0.70x1200 GI (Galvanized Steel)
Pull Out Bar Box 250x35-35x0.80x1000 GI (Galvanized Steel)
Pull Out Bar Box 250x35-35x0.80x1200 GI (Galvanized Steel)
Pull Out Bar Box 260x35-35x0.80x1000 GI (Galvanized Steel)
Pull Out Bar Box 260x35-35x0.80x1200 GI (Galvanized Steel)
Pull Out Bar Box 280x35-35x0.70x1200 GI (Galvanized Steel)
Pull Out Bar Box 290x25-25x0.8x2000 GI (Galvanized Steel)
Pull Out Bar Box 290x35-35x0.9x1500 GI (Galvanized Steel)
Pull Out Bar Box 290x35-35x0.9x1600 GI (Galvanized Steel)
Pull Out Bar Box 290x35-35x0.9x1800 GI (Galvanized Steel)
Pull Out Bar Box 290x35-35x0.9x2100 GI (Galvanized Steel)
Pull Out Bar Box 300x35-35x0.70x1000 GI (Galvanized Steel) Dimensions
Description Material
(mm)
Pull Out Bar Box 300x35-35x0.70x1200 GI (Galvanized Steel)
Pull Out Bar Cover 498x34-34x0.90x1000 GI (Galvanized Steel)
Pull Out Bar Box 300x35-35x0.80x1200 GI (Galvanized Steel)
Pull Out Bar Cover 198x34-34x0.70x1000 GI (Galvanized Steel)
Pull Out Bar Box 325x35-35x0.70x1000 GI (Galvanized Steel)
Pull Out Bar Cover 198x34-34x0.80x1000 GI (Galvanized Steel)
Pull Out Bar Box 350x35-35x0.70x1000 GI (Galvanized Steel)
Pull Out Bar Box 180x40x0.70x2400 GI (Galvanized Steel)
Pull Out Bar Box 400x35-35x0.70x1000 GI (Galvanized Steel)
Pull Out Bar Box 220x40x0.70x2400 GI (Galvanized Steel)
Pull Out Bar Box 450x35-35x0.70x1000 GI (Galvanized Steel)
Pull Out Bar Box 280x40x0.70x2400 GI (Galvanized Steel)
Pull Out Bar Box 475x35-35x0.90x1000 GI (Galvanized Steel)
Pull Out Bar Cover 178x39x0.70x2400 GI (Galvanized Steel)
Pull Out Bar Box 75x35-35x0.70x2400 GI (Galvanized Steel)
Pull Out Bar Cover 218x39x0.70x2400 GI (Galvanized Steel)
Pull Out Bar Box 298x34-34x0.70 GI (Galvanized Steel)
Pull Out Bar Cover 218x40x0.70x2400 GI (Galvanized Steel)
Pull Out Bar Cover 323x34-34x0.70x1000 GI (Galvanized Steel)
Pull Out Bar Cover 278x39x0.70x2400 GI (Galvanized Steel)
Pull Out Bar Cover 348x34-34x0.70x1000 GI (Galvanized Steel)
Pull Out Bar SET 250x35-35x0.80x1000 GI (Galvanized Steel)
Pull Out Bar Cover 398x34-34x0.70x1000 GI (Galvanized Steel)
Pull Out Bar SET 250x35-35x0.80x1200 GI (Galvanized Steel)
Pull Out Bar Cover 448x34-34x0.70x1000 GI (Galvanized Steel)
Pull Out Bar SET 260x35-35x0.80x1000 GI (Galvanized Steel)
Pull Out Bar Cover 198x30-30x0.70x1200 GI (Galvanized Steel)
Pull Out Bar Cover 198x34-34x0.70x1200 GI (Galvanized Steel)
Pull Out Bar Cover 288x34-34x0.8x1500 GI (Galvanized Steel)
Pull Out Bar Cover 288x34-34x0.8x1600 GI (Galvanized Steel)
Pull Out Bar Cover 288x34-34x0.8x1800 GI (Galvanized Steel)
Pull Out Bar Cover 288x34-34x0.8x2100 GI (Galvanized Steel)
Pull Out Bar Cover 473x34-34x0.80x1000 GI (Galvanized Steel)

83
SFSP makes every effort to maintain the
accuracy and quality of the information
provided in this Catalogue.

However, SFSP cannot guarantee and assumes

legal liability or responsibility for the accuracy
or completeness of the information provided.

Whilst every care has been exercised in the

preparation of this catalogue to ensure that
any advice, recommendations or information is
accurate, no liability or responsibility of any kind
is accepted.

Project working details should be entrusted

to appropriately qualified and experienced
persons, case by case.

With a policy of continuous product

development, SFSP may modify product design
and specification without due notice.

In case of any questions or remarks, feel free to

contact the R&D Department.