Catalog

Number

Notes

FEATURES & SPECIFICATIONS

INTENDED USE — SBL LED wraparound provides a digital lighting platform to deliver general ambient Type
lighting for surface-mount applications. The SBL provides a similar look to that of an existing fluorescent
wrap with all of the excellent benefits of LED: energy savings, long life, and maintenance savings. Ideal
for closets, storage rooms, and offices.
CONSTRUCTION — Linear side prisms control brightness, pyramidal bottom prisms minimize lamp
Square-basket LED Wraparound
image. Continuous side flanges on fixture body provide light trap and continuous diffuser support to
prevent accidental opening and simplify maintenance. Full depth, white enamel end plates.
Die-formed from code gauge cold-rolled steel. Channel cover snaps into place without the use of tools.
Full end cap factory installed to reduce job site labor.
OPTICS — The translucent white diffuser reduces glare and pixilation without impacting performance.
ELECTRICAL — Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality
SBL4
of illumination for extended service life. 90% LED lumen maintenance at 50,000 hours (L90/50,000). The
LEDs have a CRI of 82. 4'
eldoLED driver options deliver choice of dimming range and choices for control, while assuring flicker-free, LED
low-current inrush, 89% efficiency and low EMI.
Pair the SBL with the fixture mount Sensor Switch LSXR sensor for additional energy savings when the space
is unoccupied. The LSXRHL sensor dims the fixture down to a low-level setting when there is no occupancy.
This option is ideal for stairwells, back rooms, and closets due to the low occupancy level in those spaces.
Optional nLight® embedded controls continuously monitor system performance, allow for constant lumen
management / compensation function, facilitate simple “plug-and-play” network and controls upgrading
via Cat-5 cable. Ballast disconnect provided where required to comply with US and Canadian codes.
LISTINGS — CSA certified to meet U.S. and Canadian standards.
Damp listed.
DesignLights Consortium® (DLC) qualified product. Not all versions of this product may be DLC qualified.
Please check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions
are qualified.
BUY AMERICAN ACT — Product with the BAA option is assembled in the USA and meets the Buy America(n)
government procurement requirements under FAR, DFARS and DOT regulations. Please refer to www.
acuitybrands.com/buy-american for additional information.
WARRANTY — 5-year limited warranty. This is the only warranty provided and no other statements
in this specification sheet create any warranty of any kind. All other express and implied warranties are
disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/warranty/terms-and-
conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.

Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested to
provide consistent color appearance and out-of-the-box control compatibility with
simple commissioning.
• All configurations of this luminaire meet the Acuity Brands’ specification for
chromatic consistency
• This luminaire is part of an A+ Certified solution for nLight® control networks
when ordered with drivers marked by a shaded background*
• This luminaire is part of an A+ Certified solution for nLight control networks,
providing advanced control functionality at the luminaire level, when selection
includes driver and control options marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details

DECORATIVE RESIDENTIAL SBL4

SBL4 LED Wraparound
A+ Capable options indicated
by this color background.

Lead times will vary depending on options selected.

ORDERING INFORMATION Consult with your sales representative. Example: SBL4 4000LM 80CRI 35K MIN10 GZT MVOLT
SBL4
Series Lumens1 CRI Color temperature Minimum Dimming Level Dimming Voltage

SBL4 4' LED wrap 3000LM 3000 lumens 80CRI 80 CRI 30K 3000 K MIN10 Dims to 10%2 (blank) none 10 MVOLT 120-277V
4000LM 4000 lumens 35K 3500 K MIN1 Dims to 1%3 GZT Generic 0-10V 347 347V5,11
4800LM 4800 lumens 40K 4000 K NODIM On/off, non-dimming4 Dimming
6000LM 6000 lumens 50K 5000 K SLD Step-level dimming4 ZT eldoLED 0-10V
Dimming
7200LM 7200 lumens

Emergency Options Control Input/ Lumen Management Options 10 Occupancy Control Options Occupancy Sensor Technology Option Options

EL7L 700 nominal lumen battery NLIGHT nLight enabled LSXRHL Sensor Switch® PIR Passive Infrared 12
BAA Buy America(n)
pack (Noncompliant with CL80 NLIGHT nLight enabled, constant fixture mount Act Compliant
CA T20)6 lumen output, 80% sensor with High/ BDP Factory
EL14L 1400 nominal lumen Low occupancy Installed Ballast
battery pack (Noncompliant operation8,9 Disconnect Plug
with CA T20)6 LSXR10 Sensor Switch®
E10WLCP EM Self-Diagnostic battery fixture mount
pack, 10W Constant Power, sensor with on/
Certified in CA Title 20 off occupancy
MAEDBS6 operation8
EMG for use with nLight on
generator supply EM power7

ORDERING INFORMATION

Catalog number UPC Description Lumens Color temperature Voltage Wattage Pallet qty Standard carton qty.
SBL4 347 LP835 190887855692 4' LED Wraparound 3,933 3500 K 347 36 70 1
SBL4 347 LP840 190887856675 4' LED Wraparound 3,994 4000 K 347 36 70 1

Notes
1 Approximate lumen output. 8 Requires MIN1, ZT and PIR options.
2 Requires GZT control option. 9 Dims to approximately 10% light output when
3 Requires GZT, ZT, or NLIGHT control. unoccupied.
4 Not available with Control or Sensor Options. 10 When Control Input/ Lumen Management option
5 Not available with SLD option. specified leave Dimming section blank.
6 Not available with 7200LM option. 11 347 not available with battery option
7 nLight EMG option requires a conection to existing 12 Only available with Occupancy Control option.
nLight network. Power is provided from a separate
N80 or N100 enabled fixture. Requires NLIGHT.

SBL4

DECORATIVE RESIDENTIAL: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com © 2015-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/10/22
SBL4 LED Wraparound

Performance Data
Lumen Package Lumens Input Watts LPW
3000LM 80CRI 30K 3165 25.5 124
3000LM 80CRI 35K 3236 25.5 127
3000LM 80CRI 40K 3286 25.5 129
3000LM 80CRI 50K 3407 25.5 133
4000LM 80CRI 30K 3847 32.4 119
4000LM 80CRI 35K 3933 32.4 121
4000LM 80CRI 40K 3994 32.4 123
4000LM 80CRI 50K 4141 32.4 128
Sensor Switch LSXRHL Sensor
4800LM 80CRI 30K 4698 40.5 116
4800LM 80CRI 35K 4802 40.5 119 Lens type: 10 - Low Mount 360° coverage
4800LM 80CRI 40K 4877 40.5 120 Dimming: HL - High/Low Occupancy operation
4800LM 80CRI 50K 5057 40.5 125 Min Dim Level: 3V - approximately 10% light output when unoccupied
6000LM 80CRI 30K 5985 49.9 120 Time Delay: 5M - 5 minutes
6000LM 80CRI 35K 6119 49.9 123
6000LM 80CRI 40K 6214 49.9 125
6000LM 80CRI 50K 6443 49.9 129 How to Estimate Delivered Lumens in Emergency Mode
7200LM 80CRI 30K 7052 61.9 114 Use the formula below to estimate the delivered lumens in emergency mode.
7200LM 80CRI 35K 7209 61.9 117 Delivered Lumens = 1.25 x P x LPW
P = Ouput power of emergency driver. P = 10W for E10WLCP option.
7200LM 80CRI 40K 7321 61.9 118 LPW = Lumen per watt rating of the luminaire. LPW information available in
7200LM 80CRI 50K 7591 61.9 123 Performance Data section.

PHOTOMETRICS
SBL4 4000LM 80CRI 35K
180°
Coefficients of Utilization
pf 20%
90°
CP Summary pc 80% 70% 50% Zonal Lumen Summary
80° 0° 90 pw 70%50%30% 50%30%10% 50%30%10% Zone Lumens % Lamp % Fixture
200 0° 1279 1279 0 117 117 117 114 114 114 107 107 107 0° - 30° 979 24.9 24.9
5° 1275 1281 1 106 101 96 98 94 90 92 89 86 0° - 40° 1583 40.2 40.2
400 15° 1224 1240 2 96 88 80 85 78 73 80 75 70 0° - 60° 2748 69.9 69.9
60°
25° 1118 1139 3 88 77 68 75 67 61 71 64 59 0° - 90° 3660 93.1 93.1
600 4 80 68 59 66 58 51 63 56 50 90° - 120° 182 4.6 4.6
35° 962 997
RCR

45° 780 829 5 74 61 51 59 51 44 56 49 43 90° - 130° 221 5.6 5.6

800
55° 596 657 6 68 55 46 53 45 39 51 43 38 90° - 150° 263 6.7 6.7
1000 65° 414 497 7 63 49 41 48 40 34 46 39 33 90° - 180° 273 6.9 6.9
40° 75° 242 344 8 59 45 37 44 36 30 42 35 30 0° - 180° 3933 100.0 100.0
1200 85° 91 203 9 55 41 33 41 33 27 39 32 27
0° 20° 90 15 132 10 51 38 30 37 30 25 36 29 24
0° 90°

MOUNTING DATA DIMENSIONS

Suspension Kit Ceiling Types: F1 for use with most T-bar and screw slot grid ceiling applications. Designed All dimensions are inches (centimeters) unless otherwise noted.
for on-grid and off-grid installations.
Specifications
F2 for use with recessed or surface-mount horizontal J-box applications. 2-5/8
For unit or row installation; surface or suspend mounting. Length: 48 (122.0) (6.7)
Individual installation — Two single-stem hangers required. Width: 8-5/8 (21.9)
For aircraft cable, one STACG_, STACGF_, or STACGE_ required for each suspension point.
Note: 2' configurations with emergency option cannot be stem mounted. Depth: 2-5/8 (6.7) 8-5/8
(21.9)
See ACCESSORIES below for hanging devices.
All dimensions are inches (centimeters) unless otherwise indicated.

SBL4

DECORATIVE RESIDENTIAL: One Lithonia Way Conyers, GA 30012 Phone: 1-800-705-SERV (7378) www.lithonia.com © 2015-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/10/22