MS FASTENERS
The MS Fasteners are the only mechanical fasteners installed
utiling self-tapping screws for heavy duty belts which require
no drilling, no template, and no hammering. The screws drive
smoothly through the belt, without predrilling for a template.
The rubber belts are able to be repaired and put in service
immediately. (thickness of 9/64" to 23/32").
Installation of MS Fasteners requires only a power drill, MS
Fasteners are economical since no special equipment is
needed and the work can be done rapidly and safely. MS Fasteners are available in galvanized
MS Fasteners can be installed over a wide range of pulley carbon steel or in a nonmagnetic stainless
diameters from 3" to 18". They can be installed on belts which steel. MS Fasteners in Stainless Steel allow
are mechanically rated up to 800-PIW. The screws tightly and the joining of food industry belts, belts with
strongly clamp the belt for positive compression. magnet separators, or other harsh conditions.
The connecting pin (5/32" to 3/8" Dia) is
made of nylon covered galvanized steel or of
nylon nonmagnetic stainless steel. All types of
belts can be repaired immediately and in
emergency situations quick and easily.
Installation Tool
Battery, electric or pneumatic operated
drill or screwdriver
TECHNICAL DATA
MS 25 MS 35 MS 45 MS 55 MS 65
Belt thickness, in. 1/8 to 5/16 3/16 to 3/8 3/8 to 7/16 3/8 to 5/8 9/16 to 3/4
For belt with mechanical
fastener rating up to, PIW 350 360 400 600 800
Min. Pulley Ø, in. 3 3.5 5 10 18
Connecting Pin Ø, in. 5/32 3/16 1/4 5/16 25/64
Composition
Fastener Galvanized steel/non magnetic stainless steel Galvanized steel
Screws Galvanized steel/non magnetic stainless steel
Connecting Pin Nylon covered galvanized pin or nylon covered stainless steel pin
Installation Power Drill (No Pre-Drilling; No Template)
Packaging Available in strips 7" to 10-ft long
AIRMATIC
airmatic.com | 215.333.5600 | infocenter@airmatic.com
AIRMATIC founded in 1944, is a woman-owned Industrial Distributor, with installation and
maintenance capabilities, offering equipment, machinery, and shop supplies to the Industrial,
Construction, Utility, Government, and Commercial Markets. Our products and services are sold
through three business units:
The MATERIALS MANAGEMENT GROUP provides products and services to industries that convey,
store, transport, and process powders and bulk solids from aggregates, cement, and chemicals to
foods, grains, metals, power generation, and waste water treatment applications;
The SERVICE GROUP provides fabrication, installation, and maintenance services to improve bulk
materials handling efficiency; mechanical clean-out services for silos and hoppers to eliminate material
flow problems; and shop repair/rebuilding and modifications services of products sold by the Company.
The TOOL GROUP provides power tools, personal protective equipment, materials-handling
equipment, shop equipment and MRO supplies used for production, fabrication, assembly, metal
removal, maintenance, and storage in manufacturing, construction, utility, and commercial applications.
Our Customers tell us that by choosing AIRMATIC to solve their problems, they gain increased
productivity, decreased costs, and a safer, cleaner work environment.
MINET LACING TECHNOLOGY with 70 years of experience in conveyor belt lacing systems and the
conveyor belt industry owns 14 running patents. MLT has developed some fully innovative products for
splicing light and heavy duty belts (Super-Screw® : flexible lacings to screw, ISC® : splice integrated into
the belt, MS®: mechanical fasteners to screw, Clip’N Lock® : mechanical fasteners).
AIRMATIC
284 Three Tun Rd. Malvern, PA 19355
215.333.5600
infocenter@airmatic.com
airmatic.com
