Scribd
Upload
491 views1 page

Brochure s128129 NG en

The S128NG & S129NG automatic monitoring units are designed to perform condition monitoring of diesel safety engines to help schedule maintenance, avoid serious damages, and maintain optimum engine performance. The units monitor important analog parameters such as temperatures and pressures. They are designed for nuclear applications and operate under seismic conditions, benefiting from 30 years of expertise in diesel engine monitoring. Each unit is customized for its application and allows for easy configuration changes through a front panel keyboard.

Uploaded by

ISGE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
491 views1 page

Brochure s128129 NG en

The S128NG & S129NG automatic monitoring units are designed to perform condition monitoring of diesel safety engines to help schedule maintenance, avoid serious damages, and maintain optimum engine performance. The units monitor important analog parameters such as temperatures and pressures. They are designed for nuclear applications and operate under seismic conditions, benefiting from 30 years of expertise in diesel engine monitoring. Each unit is customized for its application and allows for easy configuration changes through a front panel keyboard.

Uploaded by

ISGE
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

S128NG & S129NG AUTOMATIC MONITORING UNIT

PRINCIPLES

Our S128NG & S129NG automatic monitoring

No contractual photo.
units are the simplest way to perform condition
monitoring of Diesel Safety Engine:

Maintenance program can be scheduled

Serious damages can be avoided

Engine can be maintained to its optimum


performances

Our S128 & S129 offer the monitoring of important SPECIFICATIONS


analogue measuring such as: exhaust gas
temperature, bearings temperature, water
temperature, stator winding temperature, pressure, General information:
lubrication oil temperature, etc. Analogue parameters monitoring unit
microprocessor based
Capacity: 32 analogue inputs (thermocouple,
KEY BENEFITS PT100, 4-20mA)
Housing in stainless steel

Designed in compliance with nuclear Operating temperature: +5°C / +55°C


requirements, our S128NG & S129NG Monitoring Power Supply: 24 Vvc (18 to 32v)
Units are operating under seismic conditions.
Communication network: Modbus TCP/IP or
Modbus RTU
Our Units benefit from 30 years of CMR know-how
in safety diesel engine monitoring. Each unit is Two operating mode:
configured according to his particular application Permanent display of the last channel
manually scanned
prior delivery and offer to the end user quick Automatic display of all the channels
configuration modification possibilities using
Dialogue with front plate keyboard: alarms
friendly front plate keyboard (alarm set points, alarm acknowledgement and configuration modifications
groups, output relays setting,...)
Surveillance automatique :
As an OEM Engine/Genset company, machinery
manufacturer, nuclear engineering companies One horn relay
and after-market user, our S128NG & S129NG units
For each channel: 2 set points (high, very high / low,
provide a more elegant and robust monitoring very low)
solution for your applications.
For all the channels: 4 deviation / average
monitoring groups
4 gradient monitoring groups
CMR Group
4 alarm group relays for S128 and 6 alarm group
Technopôle de Château Gombert relays available for S129
7, rue John Maynard Keynes
CS 80012 - 13388 Marseille - Cedex 13 - France 4 inhibition group contact
+33 (0)4 91 11 37 00 Self-monitoring fault relay (sensor failure, insulation
www.cmr-group.com fault, scanning fault, compensating probe fault)

For more information, contact us at sales@cmr-group.com Version uploaded in Fev 2022

You might also like