Extract from the online
catalog
MINI MCR-SL-R-UI
Order No.: 2864095
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2864095
MCR potiposition transducer for conversion of potentiometer positions
into a standard analog signal, 0 Ω input... 100 Ω to 0 kΩ ... 100 kΩ
Product notes
WEEE/RoHS-compliant since:
Commercial data 04/11/2006
EAN
4 046356 046442
sales group H520
Pack 1 Pcs.
Customs tariff 85437090 http://
www.download.phoenixcontact.com
Gross weight in pieces 0.0887 KG Please note that the data given
Net weight per piece 0.07317 KG here has been taken from the
online catalog. For comprehensive
Catalog page information Page 84 (C-7-2013) information and data, please refer
to the user documentation. The
General Terms and Conditions of
Use apply to Internet downloads.
Product description
The slim MINI MCR-SL-R-UI... potiposition transducer has a width of only 6.2 mm and converts potentiometer positions
as a percentage to an analog standard signal. If the potentiometer range cannot be utilized to the full, an externally
accessible slide switch is used to set the upper and lower potiposition end values. The output signal between 0 and
100% is based on this fixed end value.
The DIP switches are accessible on the side of the housing and allow the following parameters to be configured:
– Output signal,
PHOENIX CONTACT GmbH & Co. KG Page 1 / 6
http://www.phoenixcontact.com Jan 5, 2014
MINI MCR-SL-R-UI Order No.: 2864095
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2864095
– Automatic potentiometer detection,
– Open circuit detection slider and
– Fault evaluation type.
Power (19.2 V DC to 30 V DC) can be supplied through connection terminals on the modules or in conjunction with the
DIN rail connector.
Technical data
Dimensions
Width 6.2 mm
Height 93.1 mm
Depth 102.5 mm
Ambient conditions
Ambient temperature (operation) -20 °C ... 65 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Input data
Potentiometer 100 Ω ... 100 kΩ
Reference voltage source < 3.6 V
Output data
Voltage output signal 0 V ... 5 V
0 V ... 10 V
1 V ... 5 V
10 V ... 0 V
Current output signal 0 mA ... 20 mA
4 mA ... 20 mA
20 mA ... 0 mA
20 mA ... 4 mA
Max. voltage output signal 12.5 V
Max. current output signal 23 mA
Load/output load voltage output > 10 kΩ
Load/output load current output < 500 Ω (20 mA)
Power supply
Supply voltage 24 V DC
PHOENIX CONTACT GmbH & Co. KG Page 2 / 6
http://www.phoenixcontact.com Jan 5, 2014
MINI MCR-SL-R-UI Order No.: 2864095
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2864095
19.2 V DC ... 30 V DC (The T connector (ME 6,2 TBUS-2
1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge
the supply voltage. It can be snapped onto a 35 mm DIN rail
according to EN 60715))
Current consumption < 25 mA (at 24 V DC)
Connection data
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section stranded min. 0.2 mm²
Conductor cross section stranded max. 2.5 mm²
Conductor cross section AWG/kcmil min. 26
Conductor cross section AWG/kcmil max 12
Stripping length 12 mm
Screw thread M3
Connection method Screw connection
General
Maximum transmission error < 0.2 %
Maximum temperature coefficient < 0.02 %/K
Ambient temperature (operation) -20 °C ... 65 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C
Housing material PBT
Color green
Conformance CE-compliant
ATEX Ex II 3 G Ex nA IIC T4 Gc X
UL, USA / Canada UL 508 Recognized
GL GL EMC 2 D
Certificates / Approvals
Certification cULus Recognized, GL
Certification Ex: ATEX
Certifications applied for:
PHOENIX CONTACT GmbH & Co. KG Page 3 / 6
http://www.phoenixcontact.com Jan 5, 2014
MINI MCR-SL-R-UI Order No.: 2864095
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2864095
Accessories
Item Designation Description
General
2869728 ME 6,2 TBUS-2 1,5/5-ST-3,81 DIN rail connector for DIN rail mounting. Universal for TBUS
GN housing. Gold-plated contacts, 5-pos.
2308111 MINI MCR DKL Fold up transparent cover for MINI MCR modules with additional
labeling option using insert strips and flat Zack marker strip 6.2
mm
2810272 MINI MCR-DKL-LABEL Label for extended marking of MINI MCR modules in connection
with the MINI MCR-DKL
2864134 MINI MCR-SL-PTB MCR power terminal block for supplying several MINI Analog
modules via the T-connector, with screw connection, maximum
current consumption of up to 2 A
2864147 MINI MCR-SL-PTB-SP MCR power terminal block for supplying several MINI Analog
modules via the T-connector, with spring-cage connection,
maximum current consumption of up to 2 A
2811268 MINI MCR-SL-V8-FLK 16-A Eight MINI analog signal converters with screw connection
method can be connected to a control system using a system
adapter and system cabling with a minimum of wiring and very low
error risk.
2866653 MINI-PS-100-240AC/24DC/1.5/ DIN rail power supply unit, primary-switched mode, narrow design,
EX output: 24 V DC / 1.5 A, ATEX approval
2866983 MINI-SYS- DIN rail power supply unit, primary-switched mode, narrow design,
PS-100-240AC/24DC/1.5 output: 24 V DC / 1.5 A
Drawings
Application drawing
Height adjustment of a lifting platform with setpoint and actual
value control
PHOENIX CONTACT GmbH & Co. KG Page 4 / 6
http://www.phoenixcontact.com Jan 5, 2014
MINI MCR-SL-R-UI Order No.: 2864095
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2864095
Block diagram
Dimensioned drawing
PHOENIX CONTACT GmbH & Co. KG Page 5 / 6
http://www.phoenixcontact.com Jan 5, 2014
MINI MCR-SL-R-UI Order No.: 2864095
http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2864095
Address
PHOENIX CONTACT GmbH & Co. KG
Flachsmarktstr. 8
32825 Blomberg,Germany
Phone +49 5235 3 00
Fax +49 5235 3 41200
http://www.phoenixcontact.com
© 2013 Phoenix Contact
Technical modifications reserved;
PHOENIX CONTACT GmbH & Co. KG Page 6 / 6
http://www.phoenixcontact.com Jan 5, 2014
