Introduction

Metric Products
The Fluid Connectors Group of Parker offers an extensive The Fluid Connectors Group is continually working to Metric
selection of fittings, valves, tubing, couplers and hose improve its manufacturing operations and technology
The World Standard
products for metric applications industry wide.

Parker’s Fluid Connectors Group product lines and

and is dedicated to servicing industries having needs for
metric products.
Fluid Connectors Fluid Connectors
Products
manufacturing have grown steadily since the 1960s. With our worldwide network of distribution and Parker Quick Reference Guide
Today, the Group consists of Tube Fittings Division, Service Centers, the Fluid Connectors Group is poised
steel, stainless steel and brass fittings and adapters; to provide premier customer service.
Brass Products Division, brass fittings and valves; Quick
Coupling Division, hydraulic and pneumatic couplers, This Quick Reference Guide provides overviews and brief Bulletin 3420-MET-QRG
diagnostic test points and check valves; Hose Products specifications to assist you in selecting the proper metric
Division, low medium, high and ultra-high hose and products for your applications. Your complete source for
May 1998
Parker Fluid Connectors Regional Sales Offices
fittings; and the Parflex Division, thermoplastic hose, quality tube fittings, hose &
fittings and tubing. & Service Centers
hose fittings, brass fittings &
valves, quick-disconnect Central Region Canada
couplings and assembly Marion, IA
tools, locally available from (319) 373-1361 Eastern Region Sales
For additional product information or to order, contact a worldwide network of (319) 373-1366 FAX Office & Service Center
authorized distributors. Grimsby, ON
your Regional Sales Office (listed on the back cover), or Cleveland Region (905) 945-2274
Fittings & Couplings: Cleveland, OH (905) 945-3946 FAX
call the Parker Information Center toll-free: Available in inch and metric (216) 531-3000
Service Center
1-800-C-PARKER (1-800-272-7537) sizes covering SAE, BSP,
DIN, GAZ, JIS and ISO thread
(216) 531-5173 FAX
Pointe Claire, PQ

Quick Reference Guide Bulletin 3420-MET-QRG

configurations, manufactured Great Lakes Region (514) 694-8222
from steel, stainless steel, Waterville, OH (514) 694-1224 FAX
brass, aluminum, nylon and (419) 878-7000
! WARNING thermoplastic. (419) 878-7001 FAX Service Center
Windsor, ON
Minneapolis Region (519) 974-8575
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYS- Hose, Tubing and Bundles: Lakeville, MN (519) 974-8577 FAX
TEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY Available in a wide variety of (612) 469-5000
sizes and materials including (612) 469-5729 FAX Western Region Sales
AND PROPERTY DAMAGE.
rubber, wire-reinforced, Office & Service Center
This document and other information from Parker Hannifin Corporation, its subsidiaries and thermoplastic, hybrid and Northeast Region Edmonton, AB
authorized distributors provide product and/or system options for further investigation by users custom compounds. Trenton, NJ (403) 461-2100
having technical expertise. It is important that you analyze all aspects of your application and (609) 586-5151 (403) 462-2233 FAX
Worldwide Availability: (609) 586-3149 FAX
review the information concerning the product or system in the current product catalog. Due to Service Center
Parker operates Fluid
the variety of operating conditions and applications for these products or systems, the user, Connectors manufacturing Pacific Region Coquitlam, BC
through its own analysis and testing, is solely responsible for making the final selection of the locations and sales offices Portland, OR (604) 944-4600
products and systems assuring that all performance, safety and warning requirements of the throughout North America, (503) 283-1020 (604) 944-7789 FAX
application are met. South America, Europe, and (503) 283-2201 FAX
Asia-Pacific. Southeast Region
The products described herein, including without limitation, product features, specifications,
designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its Greensboro, NC
For information, contact (336) 373-1761
subsidiaries at anytime without notice. the nearest Regional Sales (336) 378-0913 FAX
Office listed, or call toll-free
1-800-C-PARKER Southwest Region
(1-800-272-7537) Mansfield, TX
Offer of Sale (817) 473-4431
The items described in this document are hereby offered for sale by Parker Hannifin (817) 473-8078 FAX
Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are gov-
erned by the provisions stated in the “Offer of Sale”.

© Copyright 1998, Parker Hannifin Corporation. All rights reserved. Parker Hannifin Corporation
Fluid Connectors Group
The World Standard
6035 Parkland Blvd. © Parker Hannifin Corporation
Parker Hannifin Corporation
Fluid Connectors Group Cleveland, OH 44124-4141 Printed in the U.S.A.

Cleveland, Ohio website: www.parker.com

Fluid Connectors
Bulletin 3420-MET-QRG 20M RE 5/ 98
 Tube Fittings Brass Fittings Parflex® Products

Metru-Lok ® Prestolok ® Prestolok ll ®

EO ®-Ermeto EO-2 ®-Ermeto Seal-Lok ® Two piece, ready to use, bite type fitting for use with either One piece brass fittings (nickel plated) for use with poly- Compact one-piece fittings with an engineered plastic body
copper or plastic tubing. ethylene, nylon or soft metal tubing and polyurethane tubing and brass/stainless steel components. For use with nylon,
Thermoplastic Hose & Fittings Polyethylene Tubing Nylon Tubing Polyurethane Tubing
Metric flareless bite type fittings for use with metric tubing. Metric flareless bite type fittings with EOlastic soft seal for use O-ring face seal fittings are suitable for both inch and metric
Thread Types. . . . . . . . . BSPT, BSPP, Metric Taper and Parallel with metric tubing. tubing. Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel with an internal tube support. polyethylene and polyurethane tubing. Constructed with a wire or fabric reinforcement Flexible, chemical-resistant tubing with high- Flexible, abrasion-resistant tubing with heat and Tough, flexible and kink-resistant tubing for use
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 42mm Thread Types. . . . . . . . . BSPT, BSPP, Metric Taper and Parallel Thread Types . . . . . . . . . . . . . . . . . . BSPP and Metric Parallel Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 22mm Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel for use with air, water, lubricated air systems, dimensional stability, uniformity and long term light stability for outdoor service. Highly resistant over a broad temperature range in a variety of
Materials . . . . . . . . . . . . . . . . Steel, Stainless Steel and Brass Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 42mm Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 38mm Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800-2,600 psi Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 14mm Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 14mm antifreeze solutions, synthetic hydraulic fluids strength. to chemicals and stress cracking. critical applications. Medium and high durometer
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 9,000 psi Materials . . . . . . . . . . . . . . . . Steel, Stainless Steel and Brass Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel (tubing and temperature dependent) Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . Vacuum to 300 psi Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . Vacuum to 150 psi and water-based fluids. Product . . . . . . . . . . Series E, Instrument grade, Product . . . . . . . . . . . . . . . . . . Series N, Flexible compounds available.
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 9,000 psi Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 9,000 psi Temperature Range . . . . . . . . . . . . . . . . . . . . . –65° to +250°F (tubing and temperature dependent) (tubing and temperature dependent) Product. . . . . . . 515A, 515H, 540N, 550H, 55LT, Series EB, Sizes . . . . . . . . . . . . . 4mm through 20mm O.D. Product . . . . . . . . . . . . Series U, Polyether Base
Temperature Range. . . . . . . . . . . . . . . . . . . . . . . 0° to +200°F Temperature Range. . . . . . . . . . . . . . . . . . . . . . . 0° to +150°F 53LT, 510A, 560, 590, 520N, 580N, Ultraviolet Light Resistant Pressures . . . . . . . . . . . . . . . . . . . Up to 377 psi Sizes . . . . . . . . . . . . . 4mm through 12mm O.D.
510B, 518A, 518B, 518C, 588N Sizes . . . . . . . . . . . . . 6mm through 12mm O.D. Colors. . . . . . . . . . . . . . . . . . . Black and Natural Pressures . . . . . . . . . . . . . . . . . . . Up to 130 psi
Fitting Styles. . . Metric Standpipes, Male Studs, Pressures . . . . . . . . . . . . . . . . . . . Up to 125 psi Colors. . . . . . . . . Black, Blue, Clear, Gray, Green,
Female Ball Nose Swivels; BSP Colors. . . . . . . . . . . . . . . . . . . Black and Natural Orange, Red and Yellow
Male Studs, Female Ball Nose Swivels;
French Female GAZ Swivels, Male Studs
and Standpipe; JIS Fittings
Fitting Material . . . . . . . . . . . . . . . . . . . . . Steel
Sizes . . For hoses ranging from 3/16 through 1
Pressures . . . . . . . . . . . . . . . . . Up to 6,000 psi
Integrated Fittings Adapters Ball Valves
®
Triple-Lok JIS Non-Return Valves Series of pneumatic valves that can regulate, block, unload, A comprehensive range of brass adapters to simplify the Brass valves (nickel-plated) engineered for extended service
reduce, slow start and sense the flow of an air system. installation of pneumatic systems. life. Highly inert PTFE seats and seals provide resistance to
37° flared fittings are suitable for both inch and metric tubing. Japanese Industrial Standard fittings are constructed with 30° EO ® metric non-return valves are suitable for metric tubing.
Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 38mm
male and female seats.
Thread Types . . . . . . . . . . . . . . . . . . . . . . . . . BSPT and BSPP
Thread Types . . . . . . . . . . . . . . . . . . BSPP and Metric Parallel
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 42mm
Thread Types . . . . . . . . . . . . . . . . . . BSPP and Metric Parallel
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 12mm
Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 140 psi
Thread Types . . . . . . . . . . . . . . . . . . . . . . . . . BSPT and BSPP
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8 through 1 BSP
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 1,000 psi
chemical corrosion.
Thread Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BSPP
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 through 2 BSPP
Non-Standard Products
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 through 1 Materials. . . . . . . . . . . . . . . . . . . . . . Steel and Stainless Steel (tubing and temperature dependent) Temperature Range . . . . . . . . . . . . . . . . . . . . . –65° to +250°F Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 430 psi
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,000 psi Average Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 6,000 psi Temperature Range. . . . . . . . . . . . . . . . . . . . . . . 0° to +200°F Temperature Range . . . . . . . . . . . . . . . . . . . . . –20° to +170°F
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,000 psi Average

Quick Couplings

Conversion Adapters Parklamp ® Metric Hydraulic Tubing Non-Standard Products

Fittings to convert BSP and metric threads to NPT and SAE Metric tube clamps available in standard, heavy and twin series. Seamless steel and stainless steel hydraulic tubing. Each of the five Parker Fluid Connector Divisions
threads. Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 42mm Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 80mm has dedicated facilities to manufacture all of our
60 Series 6600 Series SM Series FF Series customers’ “non-standard” fittings. We have the
Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel Materials. . . . . . . . . . . . . . . . . Clamp Halves – Polypropylene, Materials . . . . . . . . . . . . . . . . . . . . Steel Phosphate and Oiled,
Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8  through 1-1/4 Components – Steel Steel Externally Zinc Plated and Stainless Steel Double shut-off general purpose couplings used Rugged construction double shut-off general Double shut-off couplings for use with Push-to-connect coupling features flush face ability to manufacture various sizes in any of
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 6,000 psi Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 11,500 psi with chemicals, water, steam and some gases. purpose couplings. commercial hydraulic fluids. valving minimizing oil spillage when connecting your material needs.
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 5,000 psi Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP and disconnecting.
Sizes . . . . . . . . . . . . . . . . . . . . 1/4 through 1 Sizes . . . . . . . . . . . . . . . . . . . . 1/4 through 1 Sizes. . . . . . . . . . . . . . . . . . . 1/4  through 3/4 Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP
Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Sizes . . . . . . . . . . . . . . . . . . 1/4  through 3/8
Hose Products Locking Mechanism . . . . . . . . . . . . . Ball Lock
Pressure . . . . . . . . . . . . . . . . . Up to 5,000 psi
Locking Mechanism . . . . . . . . . . . . . Ball Lock
Pressure . . . . . . . . . . . . . . . . . Up to 5,000 psi
Locking Mechanism . . . . . . . . . . . . . Ball Lock
Pressure . . . . . . . . . . . . . . . . . Up to 6,000 psi
Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel
Locking Mechanism . . . . . . . . . . . . . Ball Lock
Additional Support Material
Flow. . . . . . . . . . . . . . . . . . . . . Up to 200 GPM Flow . . . . . . . . . . . . . . . . . . . . . Up to 50 GPM Flow . . . . . . . . . . . . . . . . . . . . . Up to 30 GPM Pressure . . . . . . . . . . . . . . . . . Up to 3,000 psi
Temperature Range . . . . . . . . . . –4° to +250°F Temperature Range . . . . . . . . . –40° to +250°F Temperature Range . . . . . . . . . –40° to +250°F Flow . . . . . . . . . . . . . . . . . . . . . Up to 10 GPM
Temperature Range . . . . . . . . . –40° to +250°F

Low Pressure Hose & Fittings Fleet Hose & Fittings Medium & High Pressure Hose & Fittings Very-High Pressure Hose & Fittings
Push-Lok hoses for use with air, water, For truck and engine applications such as One and two wire braid reinforced hoses for use Four and six spiral wire reinforced hoses for NS Series 6100 Series EMA-3 Series CV Series
petroleum base fluids in general industrial power steering, fuel and lube lines, air brake with petroleum base, water/glycol, water/oil applications with very high pressures and
and automotive applications. systems, marine fuel hose and medium emulsions, lubricating oils and air. severe impulsing. For use with petroleum base Push-to-connect coupling features flush face Connect under pressure coupling features flush Test port couplings for pressure measurement Check valve.
Product . . . . . . . . . 801, 821, 821FR, 831, 836 pressure hydraulics. Available in both J1402 Product . . . . . . . . . . . . . 421, 421HT, 481, 301, hydraulic fluids and water/glycols. valving minimizing oil spillage when connecting face valving for heavy duty, high pressure and rapid diagnosis in high-pressure, low Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP
Sizes. . . . . . . . . . . . . . . . 1/4 through 3/4 I.D. Type AI and Type AII dimensions. 301LT, 381 Product . . . . . . . . 341, 701, 77C, 772, 731, and disconnecting. mobile and maintenance applications. pressure and vacuum systems. Sizes. . . . . . . . . . . . . . . . . . . 1/4  through 3/4
Suction and return line hose for use with Product . . . . . . . . . . . 201, 206, 213, 221, 261, (304 for Phosphate ester base fluids) 78C, 782, 792 Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Types . . . . . . . BSPP and Metric Parallel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Thread Identification Training Material Hose and Fitting
petroleum base hydraulic fluids, lubricating 266, 293, 296 Fitting Styles . . . . . . . Metric Male and Female (774 for Phosphate ester base fluids) Sizes . . . . . . . . . . . . . . . . . . . . 3/8 through 1 Sizes . . . . . . . . . . . . . . . . . 3/4 through 1-1/2 Sizes . . . . . . . . . . . . . . . . . . 1/4, M8 and M12 Pressure . . . . . . . . . . . . . . . . . Up to 3,000 psi
Fitting Styles . . . . . . . Metric Male and Female Swivels, BSP Male and Female Swivels, Fitting Styles . . . . . Metric Male and Female Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Crack Pressure . . . . . . . . . . . . . . . . . . . 5-130 Pitch Gauges, Calipers and Port Boards to make thread/fitting Parker also offers an International Fitting Identification training Product Selection and Parametric CAD Software for Hose and
oil, water and water/glycol. identification easy. presentation. The overall objective of this presentation is to Fittings. Available on CD or 3-1/2 diskette.
Product . . . . . . . . . . . . . . . . . . . . . . . . . . . 881 Swivels, Metric Standpipe Metric Standpipe, French GAZ, Swivels, BSP Male and Female Swivels, Locking Mechanism . . . . . . . . . . . . . Ball Lock Locking Mechanism . . . . . . . . . . . . . Threaded Locking Mechanism . . . . . . . . . . . . . Threaded
Fitting Material . . . . . . . . . . . . . . . . . . . . Steel DIN Banjo and JIS Fittings Metric Standpipe, French GAZ, DIN Banjo, Pressure . . . . . . . . . . . . . . . . . Up to 2,500 psi Pressure . . . . . . . . . . . . . . . . . Up to 3,000 psi Pressure . . . . . . . . . . . . . . . . . Up to 9,200 psi train participants to learn and practice a system for identifying
Sizes . . . . . . . . . . . . . . . . . 3/4 through 2 I.D. international threads on various tube and hose fittings.
Fitting Materials . . . . . . . . . . . . . . . . . . . Steel Sizes . . . . . . . . . . . . . . . . . 1/4 through 3 I.D. Fitting Material . . . . . . . . . . . . . . . . . . . . Steel and JIS Fittings Flow . . . . . . . . . . . . . . . . . . . . . Up to 50 GPM Flow. . . . . . . . . . . . . . . . . . . . . Up to 100 GPM Temperature Range . . . . . . . . . –40° to +250°F
Fitting Styles. Metric Male and Female Swivels, Pressures. . . . . . . . . . . . . Vacuum to 3,000 psi Sizes . . . . . . . . . . . . . . . . . . . 3/16 through 2 Fitting Material . . . . . . . . . . . . . . . . . Steel Temperature Range . . . . . . . . . –40° to +250°F Temperature Range . . . . . . . . . –40° to +250°F
Metric Standpipes, BSP Male and Female Pressures. . . . . . . . . . . . . . . . . Up to 5,800 psi Sizes . . . . . . . . . . . . . . 3/8 through 2 I.D.
Swivels, DIN Banjo Fittings Pressures . . . . . . . 2,500 through 6,500 psi
Pressures . . . . . . . . . . . . . . Vacuum to 350 psi
 Tube Fittings Brass Fittings Parflex® Products

Metru-Lok ® Prestolok ® Prestolok ll ®

EO ®-Ermeto EO-2 ®-Ermeto Seal-Lok ® Two piece, ready to use, bite type fitting for use with either One piece brass fittings (nickel plated) for use with poly- Compact one-piece fittings with an engineered plastic body
copper or plastic tubing. ethylene, nylon or soft metal tubing and polyurethane tubing and brass/stainless steel components. For use with nylon,
Thermoplastic Hose & Fittings Polyethylene Tubing Nylon Tubing Polyurethane Tubing
Metric flareless bite type fittings for use with metric tubing. Metric flareless bite type fittings with EOlastic soft seal for use O-ring face seal fittings are suitable for both inch and metric
Thread Types. . . . . . . . . BSPT, BSPP, Metric Taper and Parallel with metric tubing. tubing. Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel with an internal tube support. polyethylene and polyurethane tubing. Constructed with a wire or fabric reinforcement Flexible, chemical-resistant tubing with high- Flexible, abrasion-resistant tubing with heat and Tough, flexible and kink-resistant tubing for use
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 42mm Thread Types. . . . . . . . . BSPT, BSPP, Metric Taper and Parallel Thread Types . . . . . . . . . . . . . . . . . . BSPP and Metric Parallel Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 22mm Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel for use with air, water, lubricated air systems, dimensional stability, uniformity and long term light stability for outdoor service. Highly resistant over a broad temperature range in a variety of
Materials . . . . . . . . . . . . . . . . Steel, Stainless Steel and Brass Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 42mm Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 38mm Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800-2,600 psi Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 14mm Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 14mm antifreeze solutions, synthetic hydraulic fluids strength. to chemicals and stress cracking. critical applications. Medium and high durometer
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 9,000 psi Materials . . . . . . . . . . . . . . . . Steel, Stainless Steel and Brass Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel (tubing and temperature dependent) Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . Vacuum to 300 psi Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . Vacuum to 150 psi and water-based fluids. Product . . . . . . . . . . Series E, Instrument grade, Product . . . . . . . . . . . . . . . . . . Series N, Flexible compounds available.
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 9,000 psi Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 9,000 psi Temperature Range . . . . . . . . . . . . . . . . . . . . . –65° to +250°F (tubing and temperature dependent) (tubing and temperature dependent) Product. . . . . . . 515A, 515H, 540N, 550H, 55LT, Series EB, Sizes . . . . . . . . . . . . . 4mm through 20mm O.D. Product . . . . . . . . . . . . Series U, Polyether Base
Temperature Range. . . . . . . . . . . . . . . . . . . . . . . 0° to +200°F Temperature Range. . . . . . . . . . . . . . . . . . . . . . . 0° to +150°F 53LT, 510A, 560, 590, 520N, 580N, Ultraviolet Light Resistant Pressures . . . . . . . . . . . . . . . . . . . Up to 377 psi Sizes . . . . . . . . . . . . . 4mm through 12mm O.D.
510B, 518A, 518B, 518C, 588N Sizes . . . . . . . . . . . . . 6mm through 12mm O.D. Colors. . . . . . . . . . . . . . . . . . . Black and Natural Pressures . . . . . . . . . . . . . . . . . . . Up to 130 psi
Fitting Styles. . . Metric Standpipes, Male Studs, Pressures . . . . . . . . . . . . . . . . . . . Up to 125 psi Colors. . . . . . . . . Black, Blue, Clear, Gray, Green,
Female Ball Nose Swivels; BSP Colors. . . . . . . . . . . . . . . . . . . Black and Natural Orange, Red and Yellow
Male Studs, Female Ball Nose Swivels;
French Female GAZ Swivels, Male Studs
and Standpipe; JIS Fittings
Fitting Material . . . . . . . . . . . . . . . . . . . . . Steel
Sizes . . For hoses ranging from 3/16 through 1
Pressures . . . . . . . . . . . . . . . . . Up to 6,000 psi
Integrated Fittings Adapters Ball Valves
®
Triple-Lok JIS Non-Return Valves Series of pneumatic valves that can regulate, block, unload, A comprehensive range of brass adapters to simplify the Brass valves (nickel-plated) engineered for extended service
reduce, slow start and sense the flow of an air system. installation of pneumatic systems. life. Highly inert PTFE seats and seals provide resistance to
37° flared fittings are suitable for both inch and metric tubing. Japanese Industrial Standard fittings are constructed with 30° EO ® metric non-return valves are suitable for metric tubing.
Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 38mm
male and female seats.
Thread Types . . . . . . . . . . . . . . . . . . . . . . . . . BSPT and BSPP
Thread Types . . . . . . . . . . . . . . . . . . BSPP and Metric Parallel
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 42mm
Thread Types . . . . . . . . . . . . . . . . . . BSPP and Metric Parallel
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 12mm
Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 140 psi
Thread Types . . . . . . . . . . . . . . . . . . . . . . . . . BSPT and BSPP
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8 through 1 BSP
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 1,000 psi
chemical corrosion.
Thread Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BSPP
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 through 2 BSPP
Non-Standard Products
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 through 1 Materials. . . . . . . . . . . . . . . . . . . . . . Steel and Stainless Steel (tubing and temperature dependent) Temperature Range . . . . . . . . . . . . . . . . . . . . . –65° to +250°F Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 430 psi
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,000 psi Average Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 6,000 psi Temperature Range. . . . . . . . . . . . . . . . . . . . . . . 0° to +200°F Temperature Range . . . . . . . . . . . . . . . . . . . . . –20° to +170°F
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,000 psi Average

Quick Couplings

Conversion Adapters Parklamp ® Metric Hydraulic Tubing Non-Standard Products

Fittings to convert BSP and metric threads to NPT and SAE Metric tube clamps available in standard, heavy and twin series. Seamless steel and stainless steel hydraulic tubing. Each of the five Parker Fluid Connector Divisions
threads. Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 42mm Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 80mm has dedicated facilities to manufacture all of our
60 Series 6600 Series SM Series FF Series customers’ “non-standard” fittings. We have the
Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel Materials. . . . . . . . . . . . . . . . . Clamp Halves – Polypropylene, Materials . . . . . . . . . . . . . . . . . . . . Steel Phosphate and Oiled,
Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8  through 1-1/4 Components – Steel Steel Externally Zinc Plated and Stainless Steel Double shut-off general purpose couplings used Rugged construction double shut-off general Double shut-off couplings for use with Push-to-connect coupling features flush face ability to manufacture various sizes in any of
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 6,000 psi Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 11,500 psi with chemicals, water, steam and some gases. purpose couplings. commercial hydraulic fluids. valving minimizing oil spillage when connecting your material needs.
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 5,000 psi Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP and disconnecting.
Sizes . . . . . . . . . . . . . . . . . . . . 1/4 through 1 Sizes . . . . . . . . . . . . . . . . . . . . 1/4 through 1 Sizes. . . . . . . . . . . . . . . . . . . 1/4  through 3/4 Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP
Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Sizes . . . . . . . . . . . . . . . . . . 1/4  through 3/8
Hose Products Locking Mechanism . . . . . . . . . . . . . Ball Lock
Pressure . . . . . . . . . . . . . . . . . Up to 5,000 psi
Locking Mechanism . . . . . . . . . . . . . Ball Lock
Pressure . . . . . . . . . . . . . . . . . Up to 5,000 psi
Locking Mechanism . . . . . . . . . . . . . Ball Lock
Pressure . . . . . . . . . . . . . . . . . Up to 6,000 psi
Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel
Locking Mechanism . . . . . . . . . . . . . Ball Lock
Additional Support Material
Flow. . . . . . . . . . . . . . . . . . . . . Up to 200 GPM Flow . . . . . . . . . . . . . . . . . . . . . Up to 50 GPM Flow . . . . . . . . . . . . . . . . . . . . . Up to 30 GPM Pressure . . . . . . . . . . . . . . . . . Up to 3,000 psi
Temperature Range . . . . . . . . . . –4° to +250°F Temperature Range . . . . . . . . . –40° to +250°F Temperature Range . . . . . . . . . –40° to +250°F Flow . . . . . . . . . . . . . . . . . . . . . Up to 10 GPM
Temperature Range . . . . . . . . . –40° to +250°F

Low Pressure Hose & Fittings Fleet Hose & Fittings Medium & High Pressure Hose & Fittings Very-High Pressure Hose & Fittings
Push-Lok hoses for use with air, water, For truck and engine applications such as One and two wire braid reinforced hoses for use Four and six spiral wire reinforced hoses for NS Series 6100 Series EMA-3 Series CV Series
petroleum base fluids in general industrial power steering, fuel and lube lines, air brake with petroleum base, water/glycol, water/oil applications with very high pressures and
and automotive applications. systems, marine fuel hose and medium emulsions, lubricating oils and air. severe impulsing. For use with petroleum base Push-to-connect coupling features flush face Connect under pressure coupling features flush Test port couplings for pressure measurement Check valve.
Product . . . . . . . . . 801, 821, 821FR, 831, 836 pressure hydraulics. Available in both J1402 Product . . . . . . . . . . . . . 421, 421HT, 481, 301, hydraulic fluids and water/glycols. valving minimizing oil spillage when connecting face valving for heavy duty, high pressure and rapid diagnosis in high-pressure, low Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP
Sizes. . . . . . . . . . . . . . . . 1/4 through 3/4 I.D. Type AI and Type AII dimensions. 301LT, 381 Product . . . . . . . . 341, 701, 77C, 772, 731, and disconnecting. mobile and maintenance applications. pressure and vacuum systems. Sizes. . . . . . . . . . . . . . . . . . . 1/4  through 3/4
Suction and return line hose for use with Product . . . . . . . . . . . 201, 206, 213, 221, 261, (304 for Phosphate ester base fluids) 78C, 782, 792 Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Types . . . . . . . BSPP and Metric Parallel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Thread Identification Training Material Hose and Fitting
petroleum base hydraulic fluids, lubricating 266, 293, 296 Fitting Styles . . . . . . . Metric Male and Female (774 for Phosphate ester base fluids) Sizes . . . . . . . . . . . . . . . . . . . . 3/8 through 1 Sizes . . . . . . . . . . . . . . . . . 3/4 through 1-1/2 Sizes . . . . . . . . . . . . . . . . . . 1/4, M8 and M12 Pressure . . . . . . . . . . . . . . . . . Up to 3,000 psi
Fitting Styles . . . . . . . Metric Male and Female Swivels, BSP Male and Female Swivels, Fitting Styles . . . . . Metric Male and Female Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Crack Pressure . . . . . . . . . . . . . . . . . . . 5-130 Pitch Gauges, Calipers and Port Boards to make thread/fitting Parker also offers an International Fitting Identification training Product Selection and Parametric CAD Software for Hose and
oil, water and water/glycol. identification easy. presentation. The overall objective of this presentation is to Fittings. Available on CD or 3-1/2 diskette.
Product . . . . . . . . . . . . . . . . . . . . . . . . . . . 881 Swivels, Metric Standpipe Metric Standpipe, French GAZ, Swivels, BSP Male and Female Swivels, Locking Mechanism . . . . . . . . . . . . . Ball Lock Locking Mechanism . . . . . . . . . . . . . Threaded Locking Mechanism . . . . . . . . . . . . . Threaded
Fitting Material . . . . . . . . . . . . . . . . . . . . Steel DIN Banjo and JIS Fittings Metric Standpipe, French GAZ, DIN Banjo, Pressure . . . . . . . . . . . . . . . . . Up to 2,500 psi Pressure . . . . . . . . . . . . . . . . . Up to 3,000 psi Pressure . . . . . . . . . . . . . . . . . Up to 9,200 psi train participants to learn and practice a system for identifying
Sizes . . . . . . . . . . . . . . . . . 3/4 through 2 I.D. international threads on various tube and hose fittings.
Fitting Materials . . . . . . . . . . . . . . . . . . . Steel Sizes . . . . . . . . . . . . . . . . . 1/4 through 3 I.D. Fitting Material . . . . . . . . . . . . . . . . . . . . Steel and JIS Fittings Flow . . . . . . . . . . . . . . . . . . . . . Up to 50 GPM Flow. . . . . . . . . . . . . . . . . . . . . Up to 100 GPM Temperature Range . . . . . . . . . –40° to +250°F
Fitting Styles. Metric Male and Female Swivels, Pressures. . . . . . . . . . . . . Vacuum to 3,000 psi Sizes . . . . . . . . . . . . . . . . . . . 3/16 through 2 Fitting Material . . . . . . . . . . . . . . . . . Steel Temperature Range . . . . . . . . . –40° to +250°F Temperature Range . . . . . . . . . –40° to +250°F
Metric Standpipes, BSP Male and Female Pressures. . . . . . . . . . . . . . . . . Up to 5,800 psi Sizes . . . . . . . . . . . . . . 3/8 through 2 I.D.
Swivels, DIN Banjo Fittings Pressures . . . . . . . 2,500 through 6,500 psi
Pressures . . . . . . . . . . . . . . Vacuum to 350 psi
 Tube Fittings Brass Fittings Parflex® Products

Metru-Lok ® Prestolok ® Prestolok ll ®

EO ®-Ermeto EO-2 ®-Ermeto Seal-Lok ® Two piece, ready to use, bite type fitting for use with either One piece brass fittings (nickel plated) for use with poly- Compact one-piece fittings with an engineered plastic body
copper or plastic tubing. ethylene, nylon or soft metal tubing and polyurethane tubing and brass/stainless steel components. For use with nylon,
Thermoplastic Hose & Fittings Polyethylene Tubing Nylon Tubing Polyurethane Tubing
Metric flareless bite type fittings for use with metric tubing. Metric flareless bite type fittings with EOlastic soft seal for use O-ring face seal fittings are suitable for both inch and metric
Thread Types. . . . . . . . . BSPT, BSPP, Metric Taper and Parallel with metric tubing. tubing. Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel with an internal tube support. polyethylene and polyurethane tubing. Constructed with a wire or fabric reinforcement Flexible, chemical-resistant tubing with high- Flexible, abrasion-resistant tubing with heat and Tough, flexible and kink-resistant tubing for use
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 42mm Thread Types. . . . . . . . . BSPT, BSPP, Metric Taper and Parallel Thread Types . . . . . . . . . . . . . . . . . . BSPP and Metric Parallel Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 22mm Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel for use with air, water, lubricated air systems, dimensional stability, uniformity and long term light stability for outdoor service. Highly resistant over a broad temperature range in a variety of
Materials . . . . . . . . . . . . . . . . Steel, Stainless Steel and Brass Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 42mm Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 38mm Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800-2,600 psi Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 14mm Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 14mm antifreeze solutions, synthetic hydraulic fluids strength. to chemicals and stress cracking. critical applications. Medium and high durometer
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 9,000 psi Materials . . . . . . . . . . . . . . . . Steel, Stainless Steel and Brass Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel (tubing and temperature dependent) Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . Vacuum to 300 psi Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . Vacuum to 150 psi and water-based fluids. Product . . . . . . . . . . Series E, Instrument grade, Product . . . . . . . . . . . . . . . . . . Series N, Flexible compounds available.
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 9,000 psi Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 9,000 psi Temperature Range . . . . . . . . . . . . . . . . . . . . . –65° to +250°F (tubing and temperature dependent) (tubing and temperature dependent) Product. . . . . . . 515A, 515H, 540N, 550H, 55LT, Series EB, Sizes . . . . . . . . . . . . . 4mm through 20mm O.D. Product . . . . . . . . . . . . Series U, Polyether Base
Temperature Range. . . . . . . . . . . . . . . . . . . . . . . 0° to +200°F Temperature Range. . . . . . . . . . . . . . . . . . . . . . . 0° to +150°F 53LT, 510A, 560, 590, 520N, 580N, Ultraviolet Light Resistant Pressures . . . . . . . . . . . . . . . . . . . Up to 377 psi Sizes . . . . . . . . . . . . . 4mm through 12mm O.D.
510B, 518A, 518B, 518C, 588N Sizes . . . . . . . . . . . . . 6mm through 12mm O.D. Colors. . . . . . . . . . . . . . . . . . . Black and Natural Pressures . . . . . . . . . . . . . . . . . . . Up to 130 psi
Fitting Styles. . . Metric Standpipes, Male Studs, Pressures . . . . . . . . . . . . . . . . . . . Up to 125 psi Colors. . . . . . . . . Black, Blue, Clear, Gray, Green,
Female Ball Nose Swivels; BSP Colors. . . . . . . . . . . . . . . . . . . Black and Natural Orange, Red and Yellow
Male Studs, Female Ball Nose Swivels;
French Female GAZ Swivels, Male Studs
and Standpipe; JIS Fittings
Fitting Material . . . . . . . . . . . . . . . . . . . . . Steel
Sizes . . For hoses ranging from 3/16 through 1
Pressures . . . . . . . . . . . . . . . . . Up to 6,000 psi
Integrated Fittings Adapters Ball Valves
®
Triple-Lok JIS Non-Return Valves Series of pneumatic valves that can regulate, block, unload, A comprehensive range of brass adapters to simplify the Brass valves (nickel-plated) engineered for extended service
reduce, slow start and sense the flow of an air system. installation of pneumatic systems. life. Highly inert PTFE seats and seals provide resistance to
37° flared fittings are suitable for both inch and metric tubing. Japanese Industrial Standard fittings are constructed with 30° EO ® metric non-return valves are suitable for metric tubing.
Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 38mm
male and female seats.
Thread Types . . . . . . . . . . . . . . . . . . . . . . . . . BSPT and BSPP
Thread Types . . . . . . . . . . . . . . . . . . BSPP and Metric Parallel
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 42mm
Thread Types . . . . . . . . . . . . . . . . . . BSPP and Metric Parallel
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 12mm
Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 140 psi
Thread Types . . . . . . . . . . . . . . . . . . . . . . . . . BSPT and BSPP
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8 through 1 BSP
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 1,000 psi
chemical corrosion.
Thread Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BSPP
Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 through 2 BSPP
Non-Standard Products
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 through 1 Materials. . . . . . . . . . . . . . . . . . . . . . Steel and Stainless Steel (tubing and temperature dependent) Temperature Range . . . . . . . . . . . . . . . . . . . . . –65° to +250°F Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 430 psi
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,000 psi Average Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 6,000 psi Temperature Range. . . . . . . . . . . . . . . . . . . . . . . 0° to +200°F Temperature Range . . . . . . . . . . . . . . . . . . . . . –20° to +170°F
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,000 psi Average

Quick Couplings

Conversion Adapters Parklamp ® Metric Hydraulic Tubing Non-Standard Products

Fittings to convert BSP and metric threads to NPT and SAE Metric tube clamps available in standard, heavy and twin series. Seamless steel and stainless steel hydraulic tubing. Each of the five Parker Fluid Connector Divisions
threads. Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6mm through 42mm Sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4mm through 80mm has dedicated facilities to manufacture all of our
60 Series 6600 Series SM Series FF Series customers’ “non-standard” fittings. We have the
Thread Types . . . . . . . . . . . . . BSPT, BSPP and Metric Parallel Materials. . . . . . . . . . . . . . . . . Clamp Halves – Polypropylene, Materials . . . . . . . . . . . . . . . . . . . . Steel Phosphate and Oiled,
Sizes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8  through 1-1/4 Components – Steel Steel Externally Zinc Plated and Stainless Steel Double shut-off general purpose couplings used Rugged construction double shut-off general Double shut-off couplings for use with Push-to-connect coupling features flush face ability to manufacture various sizes in any of
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Steel Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 6,000 psi Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 11,500 psi with chemicals, water, steam and some gases. purpose couplings. commercial hydraulic fluids. valving minimizing oil spillage when connecting your material needs.
Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Up to 5,000 psi Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP and disconnecting.
Sizes . . . . . . . . . . . . . . . . . . . . 1/4 through 1 Sizes . . . . . . . . . . . . . . . . . . . . 1/4 through 1 Sizes. . . . . . . . . . . . . . . . . . . 1/4  through 3/4 Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP
Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Sizes . . . . . . . . . . . . . . . . . . 1/4  through 3/8
Hose Products Locking Mechanism . . . . . . . . . . . . . Ball Lock
Pressure . . . . . . . . . . . . . . . . . Up to 5,000 psi
Locking Mechanism . . . . . . . . . . . . . Ball Lock
Pressure . . . . . . . . . . . . . . . . . Up to 5,000 psi
Locking Mechanism . . . . . . . . . . . . . Ball Lock
Pressure . . . . . . . . . . . . . . . . . Up to 6,000 psi
Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel
Locking Mechanism . . . . . . . . . . . . . Ball Lock
Additional Support Material
Flow. . . . . . . . . . . . . . . . . . . . . Up to 200 GPM Flow . . . . . . . . . . . . . . . . . . . . . Up to 50 GPM Flow . . . . . . . . . . . . . . . . . . . . . Up to 30 GPM Pressure . . . . . . . . . . . . . . . . . Up to 3,000 psi
Temperature Range . . . . . . . . . . –4° to +250°F Temperature Range . . . . . . . . . –40° to +250°F Temperature Range . . . . . . . . . –40° to +250°F Flow . . . . . . . . . . . . . . . . . . . . . Up to 10 GPM
Temperature Range . . . . . . . . . –40° to +250°F

Low Pressure Hose & Fittings Fleet Hose & Fittings Medium & High Pressure Hose & Fittings Very-High Pressure Hose & Fittings
Push-Lok hoses for use with air, water, For truck and engine applications such as One and two wire braid reinforced hoses for use Four and six spiral wire reinforced hoses for NS Series 6100 Series EMA-3 Series CV Series
petroleum base fluids in general industrial power steering, fuel and lube lines, air brake with petroleum base, water/glycol, water/oil applications with very high pressures and
and automotive applications. systems, marine fuel hose and medium emulsions, lubricating oils and air. severe impulsing. For use with petroleum base Push-to-connect coupling features flush face Connect under pressure coupling features flush Test port couplings for pressure measurement Check valve.
Product . . . . . . . . . 801, 821, 821FR, 831, 836 pressure hydraulics. Available in both J1402 Product . . . . . . . . . . . . . 421, 421HT, 481, 301, hydraulic fluids and water/glycols. valving minimizing oil spillage when connecting face valving for heavy duty, high pressure and rapid diagnosis in high-pressure, low Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP
Sizes. . . . . . . . . . . . . . . . 1/4 through 3/4 I.D. Type AI and Type AII dimensions. 301LT, 381 Product . . . . . . . . 341, 701, 77C, 772, 731, and disconnecting. mobile and maintenance applications. pressure and vacuum systems. Sizes. . . . . . . . . . . . . . . . . . . 1/4  through 3/4
Suction and return line hose for use with Product . . . . . . . . . . . 201, 206, 213, 221, 261, (304 for Phosphate ester base fluids) 78C, 782, 792 Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Type . . . . . . . . . . . . . . . . . . . . . . BSPP Thread Types . . . . . . . BSPP and Metric Parallel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Thread Identification Training Material Hose and Fitting
petroleum base hydraulic fluids, lubricating 266, 293, 296 Fitting Styles . . . . . . . Metric Male and Female (774 for Phosphate ester base fluids) Sizes . . . . . . . . . . . . . . . . . . . . 3/8 through 1 Sizes . . . . . . . . . . . . . . . . . 3/4 through 1-1/2 Sizes . . . . . . . . . . . . . . . . . . 1/4, M8 and M12 Pressure . . . . . . . . . . . . . . . . . Up to 3,000 psi
Fitting Styles . . . . . . . Metric Male and Female Swivels, BSP Male and Female Swivels, Fitting Styles . . . . . Metric Male and Female Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Material. . . . . . . . . . . . . . . . . . . . . . . . . . Steel Crack Pressure . . . . . . . . . . . . . . . . . . . 5-130 Pitch Gauges, Calipers and Port Boards to make thread/fitting Parker also offers an International Fitting Identification training Product Selection and Parametric CAD Software for Hose and
oil, water and water/glycol. identification easy. presentation. The overall objective of this presentation is to Fittings. Available on CD or 3-1/2 diskette.
Product . . . . . . . . . . . . . . . . . . . . . . . . . . . 881 Swivels, Metric Standpipe Metric Standpipe, French GAZ, Swivels, BSP Male and Female Swivels, Locking Mechanism . . . . . . . . . . . . . Ball Lock Locking Mechanism . . . . . . . . . . . . . Threaded Locking Mechanism . . . . . . . . . . . . . Threaded
Fitting Material . . . . . . . . . . . . . . . . . . . . Steel DIN Banjo and JIS Fittings Metric Standpipe, French GAZ, DIN Banjo, Pressure . . . . . . . . . . . . . . . . . Up to 2,500 psi Pressure . . . . . . . . . . . . . . . . . Up to 3,000 psi Pressure . . . . . . . . . . . . . . . . . Up to 9,200 psi train participants to learn and practice a system for identifying
Sizes . . . . . . . . . . . . . . . . . 3/4 through 2 I.D. international threads on various tube and hose fittings.
Fitting Materials . . . . . . . . . . . . . . . . . . . Steel Sizes . . . . . . . . . . . . . . . . . 1/4 through 3 I.D. Fitting Material . . . . . . . . . . . . . . . . . . . . Steel and JIS Fittings Flow . . . . . . . . . . . . . . . . . . . . . Up to 50 GPM Flow. . . . . . . . . . . . . . . . . . . . . Up to 100 GPM Temperature Range . . . . . . . . . –40° to +250°F
Fitting Styles. Metric Male and Female Swivels, Pressures. . . . . . . . . . . . . Vacuum to 3,000 psi Sizes . . . . . . . . . . . . . . . . . . . 3/16 through 2 Fitting Material . . . . . . . . . . . . . . . . . Steel Temperature Range . . . . . . . . . –40° to +250°F Temperature Range . . . . . . . . . –40° to +250°F
Metric Standpipes, BSP Male and Female Pressures. . . . . . . . . . . . . . . . . Up to 5,800 psi Sizes . . . . . . . . . . . . . . 3/8 through 2 I.D.
Swivels, DIN Banjo Fittings Pressures . . . . . . . 2,500 through 6,500 psi
Pressures . . . . . . . . . . . . . . Vacuum to 350 psi
 Introduction

Metric Products
The Fluid Connectors Group of Parker offers an extensive The Fluid Connectors Group is continually working to Metric
selection of fittings, valves, tubing, couplers and hose improve its manufacturing operations and technology
The World Standard
products for metric applications industry wide.

Parker’s Fluid Connectors Group product lines and

and is dedicated to servicing industries having needs for
metric products.
Fluid Connectors Fluid Connectors
Products
manufacturing have grown steadily since the 1960s. With our worldwide network of distribution and Parker Quick Reference Guide
Today, the Group consists of Tube Fittings Division, Service Centers, the Fluid Connectors Group is poised
steel, stainless steel and brass fittings and adapters; to provide premier customer service.
Brass Products Division, brass fittings and valves; Quick
Coupling Division, hydraulic and pneumatic couplers, This Quick Reference Guide provides overviews and brief Bulletin 3420-MET-QRG
diagnostic test points and check valves; Hose Products specifications to assist you in selecting the proper metric
Division, low medium, high and ultra-high hose and products for your applications. Your complete source for
May 1998
Parker Fluid Connectors Regional Sales Offices
fittings; and the Parflex Division, thermoplastic hose, quality tube fittings, hose &
fittings and tubing. & Service Centers
hose fittings, brass fittings &
valves, quick-disconnect Central Region Canada
couplings and assembly Marion, IA
tools, locally available from (319) 373-1361 Eastern Region Sales
For additional product information or to order, contact a worldwide network of (319) 373-1366 FAX Office & Service Center
authorized distributors. Grimsby, ON
your Regional Sales Office (listed on the back cover), or Cleveland Region (905) 945-2274
Fittings & Couplings: Cleveland, OH (905) 945-3946 FAX
call the Parker Information Center toll-free: Available in inch and metric (216) 531-3000
Service Center
1-800-C-PARKER (1-800-272-7537) sizes covering SAE, BSP,
DIN, GAZ, JIS and ISO thread
(216) 531-5173 FAX
Pointe Claire, PQ

Quick Reference Guide Bulletin 3420-MET-QRG

configurations, manufactured Great Lakes Region (514) 694-8222
from steel, stainless steel, Waterville, OH (514) 694-1224 FAX
brass, aluminum, nylon and (419) 878-7000
! WARNING thermoplastic. (419) 878-7001 FAX Service Center
Windsor, ON
Minneapolis Region (519) 974-8575
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYS- Hose, Tubing and Bundles: Lakeville, MN (519) 974-8577 FAX
TEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY Available in a wide variety of (612) 469-5000
sizes and materials including (612) 469-5729 FAX Western Region Sales
AND PROPERTY DAMAGE.
rubber, wire-reinforced, Office & Service Center
This document and other information from Parker Hannifin Corporation, its subsidiaries and thermoplastic, hybrid and Northeast Region Edmonton, AB
authorized distributors provide product and/or system options for further investigation by users custom compounds. Trenton, NJ (403) 461-2100
having technical expertise. It is important that you analyze all aspects of your application and (609) 586-5151 (403) 462-2233 FAX
Worldwide Availability: (609) 586-3149 FAX
review the information concerning the product or system in the current product catalog. Due to Service Center
Parker operates Fluid
the variety of operating conditions and applications for these products or systems, the user, Connectors manufacturing Pacific Region Coquitlam, BC
through its own analysis and testing, is solely responsible for making the final selection of the locations and sales offices Portland, OR (604) 944-4600
products and systems assuring that all performance, safety and warning requirements of the throughout North America, (503) 283-1020 (604) 944-7789 FAX
application are met. South America, Europe, and (503) 283-2201 FAX
Asia-Pacific. Southeast Region
The products described herein, including without limitation, product features, specifications,
designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its Greensboro, NC
For information, contact (336) 373-1761
subsidiaries at anytime without notice. the nearest Regional Sales (336) 378-0913 FAX
Office listed, or call toll-free
1-800-C-PARKER Southwest Region
(1-800-272-7537) Mansfield, TX
Offer of Sale (817) 473-4431
The items described in this document are hereby offered for sale by Parker Hannifin (817) 473-8078 FAX
Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are gov-
erned by the provisions stated in the “Offer of Sale”.

© Copyright 1998, Parker Hannifin Corporation. All rights reserved. Parker Hannifin Corporation
Fluid Connectors Group
The World Standard
6035 Parkland Blvd. © Parker Hannifin Corporation
Parker Hannifin Corporation
Fluid Connectors Group Cleveland, OH 44124-4141 Printed in the U.S.A.

Cleveland, Ohio website: www.parker.com

Fluid Connectors
Bulletin 3420-MET-QRG 20M RE 5/ 98
 Introduction

Metric Products
The Fluid Connectors Group of Parker offers an extensive The Fluid Connectors Group is continually working to Metric
selection of fittings, valves, tubing, couplers and hose improve its manufacturing operations and technology
The World Standard
products for metric applications industry wide.

Parker’s Fluid Connectors Group product lines and

and is dedicated to servicing industries having needs for
metric products.
Fluid Connectors Fluid Connectors
Products
manufacturing have grown steadily since the 1960s. With our worldwide network of distribution and Parker Quick Reference Guide
Today, the Group consists of Tube Fittings Division, Service Centers, the Fluid Connectors Group is poised
steel, stainless steel and brass fittings and adapters; to provide premier customer service.
Brass Products Division, brass fittings and valves; Quick
Coupling Division, hydraulic and pneumatic couplers, This Quick Reference Guide provides overviews and brief Bulletin 3420-MET-QRG
diagnostic test points and check valves; Hose Products specifications to assist you in selecting the proper metric
Division, low medium, high and ultra-high hose and products for your applications. Your complete source for
May 1998
Parker Fluid Connectors Regional Sales Offices
fittings; and the Parflex Division, thermoplastic hose, quality tube fittings, hose &
fittings and tubing. & Service Centers
hose fittings, brass fittings &
valves, quick-disconnect Central Region Canada
couplings and assembly Marion, IA
tools, locally available from (319) 373-1361 Eastern Region Sales
For additional product information or to order, contact a worldwide network of (319) 373-1366 FAX Office & Service Center
authorized distributors. Grimsby, ON
your Regional Sales Office (listed on the back cover), or Cleveland Region (905) 945-2274
Fittings & Couplings: Cleveland, OH (905) 945-3946 FAX
call the Parker Information Center toll-free: Available in inch and metric (216) 531-3000
Service Center
1-800-C-PARKER (1-800-272-7537) sizes covering SAE, BSP,
DIN, GAZ, JIS and ISO thread
(216) 531-5173 FAX
Pointe Claire, PQ

Quick Reference Guide Bulletin 3420-MET-QRG

configurations, manufactured Great Lakes Region (514) 694-8222
from steel, stainless steel, Waterville, OH (514) 694-1224 FAX
brass, aluminum, nylon and (419) 878-7000
! WARNING thermoplastic. (419) 878-7001 FAX Service Center
Windsor, ON
Minneapolis Region (519) 974-8575
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYS- Hose, Tubing and Bundles: Lakeville, MN (519) 974-8577 FAX
TEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY Available in a wide variety of (612) 469-5000
sizes and materials including (612) 469-5729 FAX Western Region Sales
AND PROPERTY DAMAGE.
rubber, wire-reinforced, Office & Service Center
This document and other information from Parker Hannifin Corporation, its subsidiaries and thermoplastic, hybrid and Northeast Region Edmonton, AB
authorized distributors provide product and/or system options for further investigation by users custom compounds. Trenton, NJ (403) 461-2100
having technical expertise. It is important that you analyze all aspects of your application and (609) 586-5151 (403) 462-2233 FAX
Worldwide Availability: (609) 586-3149 FAX
review the information concerning the product or system in the current product catalog. Due to Service Center
Parker operates Fluid
the variety of operating conditions and applications for these products or systems, the user, Connectors manufacturing Pacific Region Coquitlam, BC
through its own analysis and testing, is solely responsible for making the final selection of the locations and sales offices Portland, OR (604) 944-4600
products and systems assuring that all performance, safety and warning requirements of the throughout North America, (503) 283-1020 (604) 944-7789 FAX
application are met. South America, Europe, and (503) 283-2201 FAX
Asia-Pacific. Southeast Region
The products described herein, including without limitation, product features, specifications,
designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its Greensboro, NC
For information, contact (336) 373-1761
subsidiaries at anytime without notice. the nearest Regional Sales (336) 378-0913 FAX
Office listed, or call toll-free
1-800-C-PARKER Southwest Region
(1-800-272-7537) Mansfield, TX
Offer of Sale (817) 473-4431
The items described in this document are hereby offered for sale by Parker Hannifin (817) 473-8078 FAX
Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are gov-
erned by the provisions stated in the “Offer of Sale”.

© Copyright 1998, Parker Hannifin Corporation. All rights reserved. Parker Hannifin Corporation
Fluid Connectors Group
The World Standard
6035 Parkland Blvd. © Parker Hannifin Corporation
Parker Hannifin Corporation
Fluid Connectors Group Cleveland, OH 44124-4141 Printed in the U.S.A.

Cleveland, Ohio website: www.parker.com

Fluid Connectors
Bulletin 3420-MET-QRG 20M RE 5/ 98