Dismantling information
The document is intended for use by end-of-life recyclers or treatment facilities. It provides
the basic instructions for the disassembly of LG products to remove components and
materials requiring selective treatment.
Product Identification
Type of Product Monitor
Model name 22MK600M, 24MK600M, 27MK600M
Displays must be stored in accordance with the requirements stipulated in Appendix VIII
(1) or (2) of Directive 2012/19/EU and must, amongst other things, be stored in a
weatherproof manner. Containers with covers must be used when storing and transporting
the Displays.
Contents
1. Materials and components for Selective Treatment
2. Tools Required
3. Product Disassembly Process
4. Disassembly of External enclosure
1. Materials and components for Selective Treatment
Displays may contain hazardous substances like Pb and BFRs which are covered by exemptions under
the RoHS directive. However, the majority is present in the PCB assembly. In order to reduce emissions
as much as possible, a complete disposal of the old appliance is required. This treatment may only be
performed in authorized handling plants.
Materials and components Notes Included
Printed Circuit Boards (PCB) or Printed With a surface greater
O
Circuit Assemblies (PCA) than 10 square cm
For Remote control -
Batteries
Internal batteries -
Mercury containing components display backlights -
Includes background
Liquid Crystal Displays (LCD) with a illuminated displays
O
surface greater than 100 square cm with gas discharge
lamps
Capacitors / condensers (Containing PCB
-
/ PCT)
Electrolytic Capacitors / Condensers
measuring greater than 2.5 cm in O
diameter or height
Power cord O
External electric cables cords
Signal cable O
Gas Discharge Lamps -
Plastics containing Brominated Flame
-
Retardants
Components and waste containing
-
asbestos
Components, parts and materials
-
containing refractory ceramic fibers
Components, parts and materials
-
containing radioactive substances
2. Tools Required
List the type that would typically be used to disassemble the product to a point where
components and materials requiring selective treatment can be removed.
Tool Description Tool information
Screw driver
Nipper
Plastic Hera Jig
3. Product Disassembly Process
1. Batteries
No battery.
3. Product Disassembly Process
2. PCBs and LCD Module
The back cover of the display can easily be removed by hand and screw driver.
Once removed this will expose the accessible electronic units (PCBs),
which can now be easily removed with hand and screw driver.
LCD module(together with their casing) is only left after all other parts like electronic
units and casing have been removed.
3. Product Disassembly Process
3. Power cord and signal cables
A Power cord plugged into the back of the display can easily be removed by hand or
cables are provided as de-attached from the product
4. Capacitors > 25 mm
Capacitors > 25 mm are located in the power supply units and can be removed by
nipper
φ16*25.5mm
Monitor Only)
4. Disassembly of External enclosure
Unscrew the stand base by using coin
Push button and lift the stand body and remove the screw(1EA)
Overturn the set and disassemble the latches of three edges
Monitor Only)
4. Disassembly of External enclosure
Disassemble the back cover
Re-overturn the set and disaaemble screw 4EA and disassemble the PCB
LCD Module
