Product Data Sheet
GB/T – Charging Cable
GB/T – Charging Cable
Specification GB/T – Charging Connector +
Charging Cable
Product Definition
Charging standard GB/T
GB/T 20234.2-2015
Standards / regulations
GB/T 18487.1-2015
Approval CQC
Country approval On request
Confection line end On request
Dimensions Charging Connector
Width 63 mm
Height 113 mm
Depth 222 mm
Conductor length On request
Ambient Conditions
Ambient temperature (operation) -30°C … +50°C
Ambient temperature (storage/transport) -40°C … +80°C
Max. altitude 5.000 m (above sea level)
Degree of protection (plugged) IP44
Degree of protection (protective cap) IP44
HARTING Automotive GmbH | Marienwerderstraße 2 | D-32339 Espelkamp
www.HARTING.com/AUTOMOTIVE | e-mobility@HARTING.com
Product Data Sheet
GB/T – Charging Cable
Electrical Properties
Number of phases 1 3
Rated voltage for power contacts 250 V AC 440 V AC
Rated current for power contacts 16 A 32 A 16 A 32 A
Charging power 4 kW 8 kW 12,2 kW 24,4 kW
Number of power contacts 3 (L1, N, PE) 5 (L1, L2, L3, N, PE)
Rated voltage for signal contacts 30 V AC
Rated current for signal contacts 2A
Number of signal contacts 2 (CP, PP)
Note on the connection method Crimp termination (cannot be disconnected)
Mechanical Properties
Mating cycles > 10.000
Insertion force < 100 N
Withdrawal < 100 N
Design
Color housing / handle area black
Color mating face black
Color protective cap black
Housing with customer logo On request
Material
Material housing / handle area Plastic
Material mating face Plastic
Material protective cap Soft plastic
Flammability rating V0
Material contacts Cu-Alloy
Material surface of contacts Ag
HARTING Automotive GmbH | Marienwerderstraße 2 | D-32339 Espelkamp
www.HARTING.com/AUTOMOTIVE | e-mobility@HARTING.com
Product Data Sheet
GB/T – Charging Cable
Cable
1 phase 3 phases
Cable structure 16 A 32 A 16 A 32 A
3 x 2,5 mm² + 3 x 6,0 mm² 5 x 2,5 mm² 5 x 6,0 mm²
0,5 mm² + 0,5 mm² + 0,5 mm² + 0,5 mm²
10,2 12,8 12,8 16,5
Cable diameter
± 0,3 mm ± 0,4 mm ± 0,4 mm ± 0,3 mm
Cable resistance at 20°C (2,5 mm²) ≤ 7,98 Ω/km
Cable resistance at 20°C (6,0 mm²) ≤ 3,3 Ω/km
Cable resistance at 20°C (0,5 mm²) ≤ 39,0 Ω/km
Wiring standard IEC 62893
Type of conductor Straight
Outer sheath, material TPE-U
Outer sheath, color On request
Minimum bending radius 9 x cable diameter
Environmental Product Compliance
REACh SVHC Lead | CAS 7439-92-1
China RoHS Environmentally Friendly Use Period: 50 years
HARTING Automotive GmbH | Marienwerderstraße 2 | D-32339 Espelkamp
www.HARTING.com/AUTOMOTIVE | e-mobility@HARTING.com
Product Data Sheet
GB/T – Charging Cable
Drawings
Dimensional drawing
Pin assignment of the vehicle connector
HARTING Automotive GmbH | Marienwerderstraße 2 | D-32339 Espelkamp
www.HARTING.com/AUTOMOTIVE | e-mobility@HARTING.com
