PROJECT PROFILE ON NEON SIGN BOARDS
PRODUCT CODE : 95489
(ASICC)
QUALITY AND : As per Customers Specification
STANDARDS
Production Capacity : Quantity: 120 Nos.
(per annum)
: Value : Rs. 24,00,000
YEAR OF : 2010-11
PREPARATION
MSME Development Institute
PREPARED BY : (Ministry of MSME, Govt. of
India)
65/1, Guindy, Chennai -
600032
Ph.& Fax: 044-22501475
Web site :
www.msmedi-chennai.gov.in
1
I. Introduction:
The Neon sign board is one of the most popular and attractive media of advertisement
widely used by industrial and commercial firms to popularize their products among
the general public. The neon sign board that is installed on tall buildings attracts the
attention of people even from distant places and hence it is ideally suited for
advertisement in busy places like big town and cities.
II. Market Potential:
With the expansion of trade and industry the competition in every field is growing day
by day. After liberalization of economic policy, variety of foreign goods are available
everywhere at cheap rates creating tough competition for industrial and consumer
goods in the
Local market and advertisement has become very essential for the success of
any business activity. As such it is found to have scope for starting new small scale
units for the manufacture of neon sign boards to meet the growing demand.
III. Basis and Presumptions:
a) The basis for calculation of production capacity has been taken on single shift basis
on 75% efficiency.
b) The maximum capacity utilization on single shift basis for 300 days a year. During
first year and second year of operations the capacity utilization is 60% and 80%
respectively. The unit is expected to achieve full capacity utilization from the third year
onwards.
c) The salaries and wages, cost of raw materials, utilities, rents, etc. are based on the
prevailing rates in and around Chennai. These cost factors are likely to vary with time
and location.
d) Interest on term loan and working capital loan has been taken at the rate of 18 %
on an average. This rate may vary depending upon the policy of the financial
institutions/agencies from time to time.
e) The cost of machinery and equipments refer to a particular make/model and prices
are approximate.
f) The break-even point percentage indicated is of full capacity utilization.
g) The project preparation cost etc. whenever required could be considered under pre-
operative expenses.
h) The essential production machinery and test equipment required for the project
have been indicated. The unit may also utilize common test facilities available at
Electronics Test and Development Centers (ETDCs) and Electronic Regional Test
Laboratories (ERTLs) and Regional Testing Centers (RTCs).
2
IV. Implementation Schedule:
The major activities in the implementation of the project have been listed and
the average time for implementation of the project is estimated at 12 months:
S. No Activity Period (In
Months)
1 Preparation of project report 1
2 Registration and other formalities 1
3 Sanction of loan by financial institutions 3
4 Plant and Machinery:
a) Placement of orders 1
b) Procurement 2
c) Power connection/ Electrification 2
d) Installation/Erection of machinery/Test 2
Equipment
5 Procurement of raw materials 2
6 Recruitment of Technical Personnel etc 2
7 Trial production 11
8 Commercial production 12
Notes
1. Many of the above activities shall be initiated concurrently.
2. Procurement of raw materials commences from the 8th month onwards.
3. When imported plant and machinery are required, the implementation period of
project may vary from 12 months to 15 months.
V. Technical Aspects:
1) Process of Manufacture:
The Neon tubular lamp that is used in the Neon Sign Board is a cold cathode
type discharge lamp in which discharge takes place between two electrodes placed at
the ends of the tube. In long tubular lamps used for advertisement Purposes, several
thousand volts are applied between electrodes for which supply is given through a
high voltage transformer having high leakage reactance. The Neon lamp of different
colours are used for advertisement purposes and the desired colour is produced either
by filling lamp with suitable as or by using glass tubes coated with suitable
fluorescent material as per the requirements. Now a day's latter method is generally
adopted for producing Neon lamp of different colours.
2) Quality Control and Standards :
As per customers specification.
3) Production Capacity (per annum) :
Quantity: 120 Nos. &
Value: Rs.1200000
4) Motive Power: 10 kw.
3
5) Pollution Control:
The Government accords utmost importance to control environmental pollution.
The small-scale entrepreneurs should have an environmental friendly attitude and
adopt pollution control measures by process modification and technology substitution.
India having acceded to the Montreal Protocol in September 1992, the
production and use of Ozone Depleting Substances (ODS) like Chlorofluoro Carbon
(CFCs), Carbon Tetrachloride, Halons and methyl Chloroform etc. need to be phased
out immediately with alternative chemicals/solvents. A notification for detailed Rules
to regulate ODS phase out under the Environment Protection Act, 1986 have been put
in place with effect from 19th July 2000.
6) Energy Conservation:
With the growing energy needs and shortage coupled with rising energy cost, a
greater thrust in energy efficiency in industrial sector has been given by the
Government of India since 1980s. The Energy Conservation Act, 2001 has been
enacted on 18th August 2001, which provides for efficient use of energy, its
conservation and capacity building of Bureau of Energy Efficiency created under the
Act.
The following steps may help for conservation of electrical energy:
i) Adoption of energy conserving technologies, production aids and testing facilities.
ii) Efficient management of process/manufacturing machineries and systems, QC and
testing equipments for yielding maximum Energy Conservation.
iii) Optimum use of electrical energy for heating during soldering process can be
obtained by using efficient temperature controlled soldering and de-soldering stations.
iv) Periodical maintenance of motors, compressors etc.
v) Use of power factor correction capacitors. Proper selection and layout of lighting
system; timely switching on-off of the lights; use of compact fluorescent lamps
wherever possible etc.
VI. Financial Aspects:
a) Fixed Capital:
(i) Land and Building (Rented- per month) (Rs.)
Built Area 75 sq. meters (Rented) 20,000
4
(ii) Machinery and Equipments:
Sl.
Description Qty. Price (Rs.)
No.
Bombarding transformer 7.5 KVA
1 1 60,000
230/25000 V
2 Agency Transformer 15000 V.60 ma. 1 20,000
3 Vacuum pump 1 Micron 1 20,000
4 Gas Filling Unit 1 30,000
5 Gas plant (petrol, argon type) 1 30,000
6 High frequency Vacuum Tester 1 10,000
Tipping, Torches, Splicing torches,
7 1 18,000
ribbon burners etc.
8 Hand sheering machine 1 18,000
9 Hand operated sheet bending machine 1 14,000
10 Arc welding Transformer 12 kVA 1 22,000
11 Spot welding machine 2 kVA 1 16,000
12 Bench Drilling machine 13 mm Dia 1 12,000
13 Bench Grinder 1 10,000
Wheel valves, pressure Gauges, hand
14 L.S. 20,000
tools
Total 3,00,000
Installation and Electrification charges @ 10% 30,000
Work benches and Office equipment 30,000
(iii) Pre operative expenses : 40,000
Total Fixed Capital : 4,00,000
B. Working Capital:
i) Staff and Labour (per month): (Rs.)
1 Manager cum proprietor 1 12,000
2 Neon sign Technician 1 10,000
3 Skilled worker 1 08,000
4 Semi-skilled worker 1 7,000
5 Helper 1 6,000
Total 43,000
Perquisites @ 15% on Salaries 6,450
Total 49,450
5
(OR ) Say 50,000
ii) Raw Material (per month) :
Fluorescent coated Lead glass tube 8 mm to
1 7,500
12mm Dia 50 kgs @ Rs. 150 per kg
2 Lamp Electrodes 300 Nos. @ Rs.45 per piece 13,500
High voltage Transformer 7500 V - O - 7500 V
3 16,000
450 VA 10 Nos @ Rs. 1600 per piece
4 Argon/Neon gas 5' litres @ Rs-2500 per ltr. 12,500
5 Acrylic Sheet 6'x4' -2 Nos @ Rs. 1500 per sheet 3,000
M.S. Angle, Flat and Sheet 200 kgs @ Rs.80 per
6 16,000
Kgs
7 Hard ware materials L.S. 2,000
8 Painting material L.S. 4,000
9 Miscellaneous items 3,000
Total 70,000
(iii) Utilities (per month) : (Rs.)
Fuel SBP Spirit or Leaded petrol 7,000
Power 3,000
Total 10,000
(iv) Other Contingent Expenditure (per month) : (Rs.)
1 Rent for Building 20,000
2 Postage and Stationery 1,000
3 Telephone Charges 1,000
4 Transport Charges 2,000
5 Sales expenses 1,000
6 Miscellaneous 1,000
Total 26,000
(v) Working Expentiture (per month) :
Staff and Labour 50,000
Raw Materials 70,000
Utilities 10,000
Other Contingent Expenditure 26,000
Total 1,56,000
(vi) Working Capital (for 3 Months) : 4,68,000
6
C. Total Capital Investment:
(i) Total Fixed Capital 4,00,000
(ii) Working Capital (for 3 months) 4,68,000
Total 8,68,000
VII. Financial Analysis:
Cost of Production (per year) Rs.
1 Total recurring cost 18,72,000
2 Depreciation on Machinery and Equipment @ 10% 27,000
3 Depreciation on tools @ 25% 7,500
4 Depreciation on office furniture @ 20% 6,000
5 Interest on Capital Investment @ 18 % 1,56,240
Total 20,68,740
Or say 20,70,000
(2) Turnover (per year) : Rs.
By way of selling Neon Sign boards 24,00,000
including metal frames 120 Nos @ Rs. 20,000 each
(3) Net Profit (per year) :
Total Sales Turnover (-) Cost of production 24,00,000 (-)20,70,000 3,30,000
(4) Net Profit Ratio:
Net profit × 100 3,30,000 × 100 13.75 %
Annual turnover 24,00,000
(5) Rate of Return :
Net profit × 100 3,30,000 × 100 38 %
Capital Investment 8, 68,000
(6) Break-even Point:
Fixed Cost :
1 Total Depreciation 40,500
2 Interest on Total Capital Investment 1,56,240
3 40% of Salary and Wages 2,40,000
4 40% of Other Contingent expenses 28,800
5 100% of Rent 2,40,000
Total 7,05,540
B.E.P. :
Fixed cost × 100 330000 × 100
Fixed cost + Profit 10,35,540 31 %
7
VIII. Additional Information:
a. The Project Profile may be modified /tailored to suit the individual entrepreneurship
qualities/capacity, production programme and also to suit the locational
characteristics, wherever applicable.
b. The Electrical Technology is undergoing rapid strides of change and there is need
for regular monitoring of the national and international technology scenario. The unit
may, therefore, keep abreast with the new technologies in order to keep them in pace
with the developments for global competition.
c. Quality today is not only confined to the product or service alone. It also extends to
the process and environment in which they are generated. The ISO 9000 defines
standards for Quality Management Systems and ISO 14001 defines standards for
Environmental Management System for acceptability at international level.
The unit may therefore adopt these standards for global competition.
d. The margin money recommended is 25% of the working capital requirement at an
average. However, the percentage of margin money may vary as per bank's discretion.
8
IX. Addresses of Machinery and Equipment Suppliers:
M/s. Transformer Manufacturing and M/s. Hind Vacuum Co. (P) Ltd.
Repairing Works, B/92, Rajaji Nagar, Industrial Estate,
Vadanagar, North Gujarat. Bangalore
M/s. Toshniwal Brothers (P) Ltd. M/s. Key Engg. Works,
Mount Road, Chennai-32 16/A, Najafgarh Road, New Delhi-1
M/s. National Neon Light
6, Kennedy Street, Chennai-4
X. Addresses Raw Material Suppliers:
. M/s. Philips India Ltd. M/s. Ashok Rubber Industries,
Shivsagar Estate, Block 11-A, 106 B, Narkel Dange North Road, Kolkata
Dr. Annie Besant Road,
Mumbai.
M/s. Electrical and Glass Products,
52-A, Sidhpuza Industrial Estate, 5.V.
Road, Goregaon (West),Mumbai-52.
