Compact Weighing System
for Forklifts, Tractors,
Skid Steer and Small Loaders
• Compact Easy to read 4.3” display Optional:
• Accurate Weighing of every lift • Accumulation Software
• 100% Zero Tare facility • Mast Angle Sensor for forklifts
• Avoid Overloading • Reverse Camera
• 12-24VDC Compatible
• -30*C to +75*C operating temperature range
• Internal Buzzer 85Db
• IP65 rated
• Provision for overload alarm
Proven Rugged & Reliable
Compuload weighing systems have proven themselves in all types of applications and
environments since 1989. Compuload has 1000's of satisfied users. The rugged design
ensures continuous operation even when the going gets tough.
After continuous development, we now introduce the Compuload CL2000.
It is simple to operate and provides reliable and accurate readings.
COMPULOAD CL2000
134.2
124
Compact Weighing System for Forklifts,
Tractors, Skid Steer and Small Loaders
4.3" DISPLAY AREA
480x272pxls
91.2
81
(resistive touch)
The Compuload CL2000 is a general purpose programmable 4.3” display.
Compact and modern looking. It can be used indoors or outdoors, rated at IP65.
134.2 67.5
124 134.2
134.2
124
124
Plug connected to scket
52
4.3" DISPLAY AREA 2.6
480x272pxls
4.3"
4.3" DISPLAY
DISPLAY AREA
91.2
AREA
81
(resistive touch)
480x272pxls
91.2
480x272pxls
81
91.2
81
(resistive touch)
(resistive touch)
41.6
23.1
9.5
67.5
67.5
67.5
connectedto
Plugconnected scket
toscket
2.6
2.6
52
2.6
41.6
23.1
Plug
41.6
23.1
41.6
23.1
9.5
TECHNICAL SPECIFICATIONS:
9.5
9.5
Power supply voltage: 8 - 32 V, I max 2A
Operative temperature: - 30°C ÷ +75°C
Sealing: IP65
Main CPU: ARM Cortex M4, 32 bit
Frequency: 180 Mhz
Internal memory: 2MB Program Flash, 64MB SDRAM (Data),
8KB EEPROM
RAM: 260 KB
Display: TFT 4.3”, 480 x 272 pixels, 800 cdm, 600:1
contrast ratio
Sun readability: Yes
RTC: Yes
Wake up mode: Power supply, CAN message
Boot time: < 3 sec
Internal temperature sensor: Yes
Buzzer: 85 Db
Video Input (optional): 1 PAL/NTSC standard input
I/O List (optional): - 2 analog/digital Inputs
- 4 Outputs High Side 2A
Connector: AMP automotive 26 pin
Standards: CE
EMC industrial, automotive
Compuload is the trusted name in On Board Weighing. Established in 1988 we are privately owned Australian company who design,
manufacture and distribute the quality Compuload On Board Weighing products throughout Australia and Export markets.
Our aim is to offer quality products, dependable performance, reliable delivery and technical back up for all your weighing requirements.
Tel: 1800 285 277 www.compuload.com.au
