IDS 440 SPECIFICATIONS

STANDARD FEATURES MODES OF OPERATION

SCALE SPECIFICATIONS The IDS 440 is a versatile indicator for use in various industries and
Display Bright red LED; 1-inch x 6-digit numeric applications that can range from basic weighing, material testing to
Status Indicators Gross, Net, Motion, Zero, LB, Kg (LED) more complex formula batch weighing. The IDS 440 is housed in a
Keyboard 19-key sealed tactile feel membrane rugged stainless steel enclosure and provides a universal mounting
Internal Resolution 24-bit A/D Sigma-Delta; 8,000,000 d bracket for wall or desk mounting. The viewing angle can be
Display Resolution 120,000 dd industrial; 10,000 dd HB44 adjusted for the best possible view of the weight. The bright red 1
Display increments Selectable 1, 2, 5, 10,20, 50 100 inch high LED display makes it easy to read the weight from longer
Decimal Point Selectable 0, 1, 2, 3, 4 decimal places distances compared to other indicators. The keyboard features large
Conversation Rate 60 samples/second typical keys which give you tactile and audible confirmation of data entry.
Signal Sensitivity 0.1 uV/graduation (min) The IDS 440 is programmable in a easy and flexible macro
Signal Range 0.5 mV/V to 6mV/V language called Scale Basic. In addition to the built-in modes of
Load Cell Excitation 10 ± 0.5VDC (-5 to +5) operation, Scale Basic allows you to customize the operation of the
Load Cell Power 12 x 350 Ω or 24 x 700 Ω load cells IDS 440 to meet your application requirements. The Scale Basic
Auto Zero Tracking 0-60 dd in 1/4 dd increments language provides various commands and functions that include:
Auto Zero Delay 0-25 seconds In 0.1 second increments math operations, I/O control, setpoints, timers, data entry, id
Motion Detect 0-60 dd in 1/4 dd increments storage, message display, and program sequence control among
Motion Delay 0-25 seconds In 0.1 second increments others. Programming the IDS 440 can be performed through the
Digital Filter 0-18 selectable filter (DSP) levels keyboard or a PC using the optional EZ-LINK software that greatly
Calibration Selectable multi-point (up to 5) digital facilitates setup and programming.
calibration to linearize input signal
Watchdog Timer Enable/disable fault tolerant operation MODE 0 - Normal
RFI Protection Signal, excitation and sense lines Basic gross, tare and net weighing
RAM 32K provides 500 ID storage (parts, etc) MODE 1 – Fill to Setpoint
Single setpoint fill with relay output control and weight print
COMMUNICATIONS MODE 2 - Over/Under Checkweigh
Serial Port 1 Simplex RS232 or 20mA current loop Provides 3 TTL outputs and 2 setpoints to indicate over, under and
Serial Port 2 Full duplex RS232, 20mA or RS485 between weight conditions. Outputs can activate lights or alarms
Digital Port 6 inputs and 9 outputs; Low active (TTL) MODE 3 – Vehicle Weigh-In/Out with Totals
Print Formats 4 user configurable print formats Weigh-In/Out program for up to 500 vehicles; Maintains running
Parallel Port Centronics compatible ASCII port totals for each vehicle; Provides reporting functions
MODE 4 - Multi-Container/Axle Auto Weighing
GENERAL SPECIFICATIONS Auto weighs and prints each weight placed on the scale; Each
Power 110/220VAC ±10% @ 50/60Hz or 12-28 weight is sequentially numbered and accumulated; The total can be
VDC printed manually or automatically; Provides traffic light control
Power Consumption 13W @ 115VAC; 8W @ 12VDC MODE 5 - Auto Axle Weigh (Long Scales)
o
Operating Temperature -10 to +40 C. Same as Mode 4 but previous axles are auto tared
Weight 7.8 lbs (3.54 kg) MODE 6 – ID Tare, Print and Total
Warranty One year limited Provides tare entry and recall by ID; Prints ID, sequence # and GTN
weights; Keeps running totals by ID; Provides reporting functions
MODE 7 - Peak Hold Mode
Display or print the peak gross or net weight detected
Analog Output Module Fully isolated 0-10VDC or 4-20mA; 16-bit
resolution; 650Ω load resistance
Relay Board 6-channel internal relay board
Relay Modules Input/output solid-state (AC/DC) relays
Clock Module Time & Date clock Y2K and Leap Year A = 9.75” (24.77 cm)
compliant B = 8.38” (21.29 cm)
High speed (HS) 100 samples/second conversion rate; C = 8.88” (22.56 cm)
High speed process control applications D = 3.63” (9.22 cm)
EZ-LINK PC software; Facilitates configuration E = 4.75” (12.07 cm)
and Scale Basic programming C D
IS Barriers Hazard location intrinsic safety barriers
Panel Mount Panel mount enclosure
Z-Purge Ready Z-Purge ready enclosure for use with 123456
purging system in Hazardous locations
DC operation 12-28 VDC operation A B

APPROVALS
E
NTEP COC# 95-073A1; CSA; UL & CUL
Specifications subject to change without notice  IDS, Inc. 2011 05/10/2011 DS-IDS440.doc

Industrial Data Systems, Inc. 3822 E La Palma Ave. 92807 Tel: 714-921-9212 Fax: 714-399-0286
Sales: 800-854-3311 E-mail: sales@industrialdata.com Website: www.industrialdata.com
 INDUSTRIAL DATA SYSTEMS
WEIGHING TECHNOLOGY LEADERS

•
APPLICATIONS
Gross, Tare & Net weighing
MODEL IDS 440
• Vehicle and Railroad weighing
• Multi-Container or Axle weighing WEIGHT INDICATOR
• Weigh system interface to Distributed Control System
• Batching and Process control systems
• Drum Filling,Tank, Hopper, Bench, Floor & Counting Scales
• Over/Under Check Weighing and Material Testing
• Chemical and Washdown Environments
• Hazardous Environments with Optional IS Barriers

FEATURES
• Nema 4/4x stainless steel enclosure
• 1 inch high bright bold LED display (6 digit)
• 19-key audible with tactile feel membrane keyboard (sealed)
• 8 selectable modes of operation: Normal; Fill to Setpoint;
Over/Under Checkweigh; Vehicle Weigh-In/Out with Totals; Multi-
Container/Axle Auto Weighing with Total; Auto Weigh & Print; Auto
Axle Weigh with Traffic Light Control (Short/Long Scales); ID Tare,
Print & Total; Peak Hold
• Programmable in Scale Basic macro language for application
development (Event Driven)
• Simulates AND, CONDEC, WEIGHTRONIX, OHAUS
communication protocols; User configurable protocol
• Selectable 5-point calibration for improved accuracy
• 24 bit A/D with 60 to 100 samples/second conversion rate
• Signal sensitivity to 0.1 uV/graduation
• Selectable digital filter to eliminate weight vibrations
• Powers up to 12 x 350 Ω or 24 x 700 Ω load cells
• Two serial ports (RS232, 20mA current loop and RS485)
• Digital port for relay control and remote operation
• Primary and secondary units with conversion factor
• 32K RAM provides 500 ID storage (part, truck, etc.)
• Selectable address for multi-drop RS485 network interface

OPTIONS
• Time & Date clock Y2K and Leap Year compliant
• 4-20mA/0-10VDC isolated analog output, 16-bit resolution
• 6-channel relay board for setpoint control or remote operation
• Input/output solid-state Relay Modules (AC/DC)
• High speed (HS) 100 samples/second conversion rate
• EZ-LINK PC software; Facilitates configuration and Scale Basic
programming; Windows 3.1/95/98/2000 compatible
• Intrinsic safety barriers for Hazardous locations CL I/II/III Div. 1&2
Groups A-G
• Panel Mount enclosure
• Z-Purge ready enclosure for use with purging system in
Hazardous locations (CL I/II, Div 2, Groups C-G)
• 12-28 VDC operation
MADE IN U.S.A.