表4 表面（山折り面） センター折り 表1（表紙）
Weighing Indicator
NEW
AD-4329A
New and improved!
Meets your needs to help
expand your business today !
表2 中面（谷折り面） センター折り 表3
AD-4329A
Weighing Indicator
Standard RS-232C Interface
4-point digital linearization across the full span
Triple ranges for weighing capacity are available
Comparator output to an optional relay
Vacuum fluorescent display
CAL
Hidden behind the cover on the front panel. Enter the
calibration mode/CF functions settings.
Keys
OPR/STB Turns display On/Off. The load cell is NET/B/G NET GROSS Switches between net and gross
still powered when the display is off. weights.
PRESET TARE Sets the preset tare weight. 0 ZERO Sets the zero point.
M+ Accumulates the displayed weighing T TARE Subtracts the tare weight.
value. PRINT Outputs data to a peripheral device
MODE Displays and clears the accumulated such as a printer. Save parameters
weighing values. Used in calibration. in the Function settings.
The AD-4329A is your best choice for a variety of applications such as
platform scale, packer scale, hopper scale, checkweigher and truck scale.
Vacuum fluorescent display 1/20,000 displayed count resolution (maximum)
Accumulative data is stored into memory Powers up to 8 units of load cells at 350Ω
automatically or manually Averaging time and width can be selected for
Comparator output (Hi/OK/Lo) to optional various applications
relays RFI/EMI protected
Set-point comparison for batching applications Meets OIML Class III specifications
(Near Zero/Prelim/Target/Free Fall) Mount on panel, column or desk top
Selectable weighing ranges (up to triple ranges) Enters predetermined tare weight from keypad
Standard RS-232C Can be controlled via external input
4-point digital linearization
表2 中面（谷折り面） センター折り 表3
Your Best Solution
Best Price Performance for your various applications
F O R D
Platform Scale PC Interface Truck Scale
Standard RS-232C
AD-4329A
Packer Scale External Display
Relay output AD-8919/AD-8920
• Near Zero
• Prelim
• Target
• Free Fall
12345678
Conveyer
Base
Hopper Scale Printer
Relay output AD-8118A/B
• Near Zero Checkweigher
• Prelim Comparator output
• Target (Hi/OK/Lo)
• Free Fall
1 2
Rear Panel View
1. Standard RS-232C interface.
Optional BCD (OP-01), RS-422/485 (OP-03) or
analog output 4 -20mA (OP-07)
2. Optional comparator output (OP-02)
3. External control input
4. Standard current loop output
5. Load cell connector
3 4 5
表4 表面（山折り面） センター折り 表1（表紙）
AD-4329A Weighing Indicator
Physical Dimensions
Unit : mm / inches
165 / 6.50"
15.5 / 0.61" 131 / 5.16" 12.5 / 0.49" 186 / 7.32"
192 / 7.56"
AD-4329A WEIGHING INDICATOR
kg
96 / 3.78"
92 / 3.62"
t
(5.2 / 0.20")
Front View Side View Cut Out
Specifications
Input Sensitivity 0.15µV/d (min.) Keys STANDBY/OPERATE, NET/GLOSS,
Input Signal Range —35mV to +35mV PRESET TARE, TARE, ZERO, M+, MODE,
Load Cell Excitation 5V DC ±5%, 120mA PRINT
Load Cell Drive Capacity Up to 8 units of load cells at 350Ω Power Supply 100 to 240V AC (Please request
Up to 16 units of load cells at 800Ω preferred voltage rating at time of order),
(LCC07/LCC11/LCC12) 45 to 65Hz, 30VA
Zero Temperature Coefficient ±0.02µV/ºC typ. ±0.1µV/ºC max. Net Weight Approximately 1.8kg / 4.0lb
Span Temperature Coefficient ±3ppm/ºC typ. ±15ppm/ºC max. Dimensions 192(W) 96(H) 165(D) mm
Non-Linearity 0.005% of full scale (compliance with DIN)
Maximum Input Noise Less than 0.15µVp-p Panel Cut Out Dimensions 186(W) 92(H) mm
Input Impedance 10MΩ or more Operating Temperature —5ºC to 40ºC (23ºF to 104ºF)
A/D Conversion Method Delta-sigma modulation Storage Temperature —10ºC to 70ºC (14ºF to 158ºF)
A/D Internal Resolution 16,000,000 counts
Options
Maximum Display Resolution 20,000 counts (max.)
AD-4329A-01 BCD output (open collector)
A/D Conversion Rate Approximately 10 times/sec.
AD-4329A-02 Comparator output (relay output)
Weight Display Vacuum Fluorescent Display, 7-digit,
AD-4329A-03 RS-422/485
7-segment, 13mm (character height)
AD-4329A-07 Analog output (4-20mA)
Annunciator Stable, Zero Point, Gross, Net, Tare,
Accumulation, kg/t or lb Standard accessories
Standard Serial Interface RS-232C interface •AC cable (2 meters) •External input plug
20mA current loop •Load cell input plug •Rubber foot (4 pcs)
•Capacity sticker •Current loop output plug
Appearance and/or specifications subject to change for improvement without notice.
…Clearly a Better Value
A&D Instruments Ltd. A&D RUS Co., Ltd.
3-23-14 Higashi-lkebukuro, Toshima-ku, Tokyo 170-0013 JAPAN Unit 24/26 Blacklands Way Abingdon Business Park, Vereyskaya str.17, Moscow, 121357 RUSSIA
Telephone:［81］(3) 5391-6132 Fax:［81］(3) 5391-6148 Abingdon, Oxon OX14 1DY UNITED KINGDOM Telephone:［7］ ［7 ］
(495) 937-33-44 Fax: (495) 937-55-66
http://www.aandd.jp Telephone:［44］ ［44］(1235) 550485
(1235) 550420 Fax:
〈German Sales Office〉 A&D Instruments India Private Limited
A&D Engineering, Inc. Hamburger Straße 30 D-22926 Ahrensburg, GERMANY
509 Udyog Vihar Phase V Gurgaon-122 016,
1756 Automation Parkway, San Jose, CA 95131 U.S.A. Haryana, INDIA
Telephone:［1］ Telephone:［49］
(0) 4102 459230 Fax:［49］(0) 4102 459231
［1］(408) 263-0119
(408) 263-5333 Fax: Telephone:［91］(124) 471-5555 Fax:
［91］(124) 471-5599
A&D Australasia Pty Ltd. A&D Korea Limited
32 Dew Street, Thebarton, South Australia 5031 AUSTRALIA 817, Manhattan Bldg., 33, Gukjegeumyung-ro 6-gil,
Telephone:［61］(8) 8301-8100 Fax: Yeongdeungpo-gu, Seoul, 150-749, KOREA
［61］(8) 8352-7409 Telephone:［82］(2) 780-4101 Fax:［82］(2) 782-4280
AD4329A-ADCC-01-ZW1-14a03
