Gear Pump
SMCS - 5073
Número de pieza - 258-3520
S/N - RED1-UP
Número de pieza - 258-3464
S/N - RED1-UP
(2) Pressure port for implement pump
(4) Pressure port for charge pump
(6) Pressure port for ATAAC pump
(9) Suction port
Rotation ... Clockwise
(1) Implement pump
Displacement per revolution ... 31 cc (1.9 in3)
Maximum pressure ... 25000 kPa (3650 psi)
Maximum speed ... 3000 rpm
Operating temperature ... -40 to 90 °C (-40 to 194 °F)
(3) Charge pump
Displacement per revolution ... 21 cc (1.3 in3)
Maximum pressure ... 25000 kPa (3650 psi)
Maximum speed ... 3000 rpm
Operating temperature ... -40 to 90 °C (-40 to 194 °F)
(5) ATAAC pump
Displacement per revolution ... 6 cc (0.4 in3)
Maximum pressure ... 25000 kPa (3650 psi)
Maximum speed ... 3000 rpm
Operating temperature ... -40 to 90 °C (-40 to 194 °F)
(7) Torque for four bolts ... 140 N·m (105 lb ft)
(8) Torque for four bolts ... 40 N·m (30 lb ft)
Gear Pump
SMCS - 5073
Número de pieza - 258-3521
S/N - RED1-UP
Número de pieza - 258-3465
S/N - RED1-UP
(1) Suction port for charge pump
(3) Pressure port for charge pump
(5) Pressure port for ATAAC pump
(7) Suction port for ATAAC pump
Rotation ... Clockwise
(2) Charge pump
Displacement per revolution ... 21 cc (1.3 in3)
Maximum pressure ... 25000 kPa (3650 psi)
Maximum speed ... 3000 rpm
Operating temperature ... -40 to 90 °C (-40 to 194 °F)
(4) ATAAC pump
Displacement per revolution ... 6 cc (0.4 in3)
Maximum pressure ... 25000 kPa (3650 psi)
Maximum speed ... 3000 rpm
Operating temperature ... -40 to 90 °C (-40 to 194 °F)
(6) Torque for four bolts ... 45 N·m (33 lb ft)
Piston Pump (Work Tool) - High Flow
SMCS - 5070-WTL
Número de pieza - 258-2554
Rotation ... Clockwise
Displacement per revolution ... 45 cc (2.7 in3)
Pressure for cut-off setting ... 28000 ± 500 kPa (4062 ± 72 psi)
Maximum pressure ... 35000 kPa (5100 psi)
(1) Torque for four bolts ... 7 ± 1 N·m (60 ± 9 lb in)
(2) Torque for two lock screws ... 8 to 10 N·m (70 to 90 lb in)
(3) Torque for four bolts ... 84.0 to 108.5 N·m (60 to 80 lb ft)
(4) Torque for two O-ring plugs ... 127 N·m (95 lb ft)
Piston Pump (Hydrostatic)
SMCS - 3203
Número de pieza - 258-2404
Rotation ... clockwise
Displacement ... 54 ± 1 cc (3.3 ± 0.06 cu in)
(1) 278-8737 Pump Control Valve Gp
(2) Torque for 12 bolts ... 13 ± 1 N·m (115 ± 9 lb in)
(3) Torque for 12 bolts ... 5.5 ± .5 N·m (49 ± 4 lb in)
(4) 278-8746 Relief Valve
Maximum pressure at 56 L/min (14.8 US gpm) ... 3200 kPa (464 psi)
Minimum pressure at 20 L/min (5.3 US gpm) ... 2600 kPa (377 psi)
Torque for relief valve ... 44 ± 3 N·m (32 ± 2 lb ft)
(5) Torque for relief valve nut ... 3.5 ± .5 N·m (31 ± 4 lb in)
(6) 278-8743 Solenoid Valve Gp
Torque for solenoid valve ... 45 ± 5 N·m (33 ± 4 lb ft)
(7) Torque for solenoid valve assembly nut ... 9 ± 1 N·m (80 ± 9 lb in)
(8) Torque for eight bolts ... 14 ± 1 N·m (10 ± 1 lb ft)
(9) Torque for six 8C-3413 Bolts ... 110 ± 10 N·m (81 ± 7 lb ft)
(10) 278-8745 Relief Valves
Crossover relief pressure ... 35000 ± 2000 kPa (5076 ± 290 psi)
Torque for 4 crossover relief valves ... 80 ± 10 N·m (59 ± 7 lb ft)
Hydrostatic Pump and Mounting
SMCS - 3203-MT
Número de pieza - 258-2406
Ver imagen
g01560095
Illustration 1
Note: Slide the coupling hub assembly (1) over the drive shaft.
(A) Distance that is required to stop the coupling hub assembly (1) ... 70.9 mm (2.79
inch)
(2) Torque for the bolt ... 102 ± 5 N·m (75 ± 4 lb ft)
Hydrostatic Motor and Mounting
Torque for six nuts ... 150 ± 10 N·m (111 ± 7 lb ft)
The nuts should be rotated an additional 60 ± 5 degrees after the nuts have been
torqued.
Piston Motor (Hydrostatic) - 2-speed LH Motor
SMCS - 4351
Número de pieza - 258-2835
S/N - RED1-UP
Piston Motor Gp
Rotation ... Bidirectional
Preferred Rotation of motor ... Counterclockwise
Maximum displacement ... 842 cc/rev (51 in3/rev)
Minimum displacement ... 562 cc/rev (34 in3/rev)
Relief pressure for the flushing valve at 2 L/min (0.53 US gpm) ... 2000 kPa (290 psi)
Maximum Continuous Case Pressure ... 500 kPa (73 psi)
Maximum Case Pressure ... 1000 kPa (145 psi)
Maximum Inlet Pressure at Port (2) ... 40000 kPa (5800 psi)
Minimum Nominal Inlet Pressure at Port (2) ... 35000 kPa (5076 psi)
Maximum Inlet Pressure at Port (4) ... 40000 kPa (5800 psi)
Minimum Nominal Inlet Pressure at Port (4) ... 35000 kPa (5076 psi)
Minimum pressure range for brake and for 2 speed signal ... 2500 kPa (361 psi)
Maximum pressure range for brake and for 2 speed signal ... 3500 kPa (508 psi)
Minimum Brake Release Pressure ... 1200 kPa (174 psi)
Minimum holding torque for the brake ... 4500 N·m (3319 lb ft)
Displacement for the brake ... 23 cc (1.4 in3)
Minimum shift pressure for flushing valve for initial movement of flushing spool ... 700
kPa (102 psi)
Maximum shift pressure for flushing valve for initial movement of flushing spool ...
1000 kPa (145 psi)
(1) Inlet port for Brake
(2) bidirectional port
The rotation of the motor will be counterclockwise if port (2) is used as an inlet.
The rotation of motor will be clockwise if port (2) is used as an outlet.
(3) Port for 2 speed shift
(4) bidirectional port
The rotation of the motor will be clockwise if port (4) is used as an inlet.
The rotation of the motor will be counterclockwise if port (4) is used as an outlet.
(5) Case drain port
Piston Motor (Hydrostatic) - 2-speed RH Motor
SMCS - 4351
Número de pieza - 258-2836
S/N - RED1-UP
Piston Motor Gp
Rotation ... Bidirectional
Preferred Rotation of motor ... Clockwise
Maximum displacement ... 842 cc/rev (51 in3/rev)
Minimum displacement ... 562 cc/rev (34 in3/rev)
Relief pressure for the flushing valve at 2 L/min (0.53 US gpm) ... 2000 kPa (290 psi)
Maximum Continuous Case Pressure ... 500 kPa (73 psi)
Maximum Case Pressure ... 1000 kPa (145 psi)
Maximum Inlet Pressure at Port (2) ... 40000 kPa (5800 psi)
Minimum Nominal Inlet Pressure at Port (2) ... 35000 kPa (5076 psi)
Maximum Inlet Pressure at Port (4) ... 40000 kPa (5800 psi)
Minimum Nominal Inlet Pressure at Port (4) ... 35000 kPa (5076 psi)
Minimum brake and pressure range for 2 speed signal ... 2500 kPa (361 psi)
Maximum brake and pressure range for 2 speed signal ... 3500 kPa (508 psi)
Minimum Brake Release Pressure ... 1200 kPa (174 psi)
Minimum holding torque for the brake ... 4500 N·m (3319 lb ft)
Displacement for the brake ... 23 cc (1.4 in3)
Minimum shift pressure for flushing valve for initial movement of flushing spool ... 700
kPa (102 psi)
Maximum shift pressure for flushing valve for initial movement of flushing spool ...
1000 kPa (145 psi)
(1) Inlet port for Brake
(2) bidirectional port
The rotation of the motor will be clockwise if port (2) is used as an inlet.
The rotation of motor will be counterclockwise if port (2) is used as an outlet.
(3) Port for 2 speed shift
(4) bidirectional port
The rotation of the motor will be counterclockwise if port (4) is used as an inlet.
The rotation of the motor will be clockwise if port (4) is used as an outlet.
(5) Case drain port
Piston Motor (Hydrostatic)
SMCS - 4351
Número de pieza - 258-2605
S/N - RED1-UP
Ver imagen
g01328882
Illustration 1
Piston Motor Gp
Rotation ... Bidirectional
Maximum displacement ... 842 cc/rev (51 in3/rev)
Relief pressure for the flushing valve at 2 L/min (0.53 US gpm) ... 2000 kPa (290 psi)
Minimum Brake Release Pressure ... 1200 kPa (174 psi)
Maximum Brake Release Pressure ... 3500 kPa (508 psi)
Maximum Continuous Case Pressure ... 500 kPa (73 psi)
Maximum Case Pressure ... 1000 kPa (145 psi)
Maximum Inlet Pressure at Port (1) ... 40000 kPa (5800 psi)
Minimum Nominal Inlet Pressure at Port (1) ... 35000 kPa (5076 psi)
Maximum Inlet Pressure at Port (3) ... 40000 kPa (5800 psi)
Minimum Nominal Inlet Pressure at Port (3) ... 35000 kPa (5076 psi)
Minimum holding torque for the brake ... 4500 N·m (3319 lb ft)
Displacement for the brake ... 23 cc (1.4 in3)
Minimum shift pressure for flushing valve for initial movement of flushing spool ... 700
kPa (102 psi)
Maximum shift pressure for flushing valve for initial movement of flushing spool ...
1000 kPa (145 psi)
(1) bidirectional port
The rotation of the motor will be counterclockwise if port (1) is used as an inlet.
The rotation of motor will be clockwise if port (1) is used as an outlet.
(2) Case drain port
(3) bidirectional port
The rotation of the motor will be clockwise if port (3) is used as an inlet.
The rotation of the motor will be counterclockwise if port (3) is used as an outlet.
(4) Inlet port for Brake
Control Manifold (Motor, 2-Speed)
SMCS - 5264; 5479
Número de pieza - 274-8564
Número de pieza - 258-3463
Ver imagen
(2) Inlet port
(3) Pilot port
(4) Tank port
(1) 252-4734 Solenoid Valve Gp
Nominal operating voltage ... 12 VDC
Resistance at 20 ± 5 °C (68 ± 9 °F) ... 7.5 ± 0.4 Ohms
Operating temperature ... 40 to 121 °C (104 to 250 °F)
Maximum pressure ... 5168 kPa (750 psi)
Control Valve (Work Tool)
SMCS - 5051
Número de pieza - 258-2508
S/N - RED1-UP
Número de pieza - 258-2508
S/N - MST1-UP
Front view
Note: Before assembly, all the threads must be clean and free from rust, primer and
paint.
(1) Torque for the O-ring plug ... 14.0 ± 1.5 N·m (125 ± 13 lb in)
View A-A
(2) 216-6161 Relief Valve Gp
Quantity ... 2
Torque for the relief valve group ... 45 ± 5 N·m (33 ± 4 lb ft)
Pressure setting at 3.79 L/min (1.0 US gpm) ... 27600 ± 345 kPa (4004 ± 50 psi)
(3) 216-6160 Relief Valve Gp
Quantity ... 2
Torque for the relief valve group ... 45 ± 5 N·m (33 ± 4 lb ft)
Pressure setting at 3.79 L/min (1.0 US gpm) ... 24500 ± 345 kPa (3554 ± 50 psi)
(4) 295-1799 Relief Valve Gp
Torque for the nut ... 7 ± 1 N·m (60 ± 9 lb in)
Torque for the nut ... 18 ± 2 N·m (160 ± 18 lb in)
Torque for the relief valve group ... 33.0 ± 3.5 N·m (290 ± 30 lb in)
Pressure setting at 80 L/min (21 US gpm) ... 23000 ± 345 kPa (3336 ± 50 psi)
Section C-C
(5) 003-3082 Spring
Quantity ... 3
Free length ... 35.1 mm (1.38 inch)
Outside diameter ... 6.6 mm (0.26 inch)
(6) Torque for three plugs ... 65 ± 7 N·m (48 ± 5 lb ft)
Section B-B
(7) 204-1489 Spring
Quantity ... 4
Length under test force ... 21.34 mm (0.840 inch)
Maximum test force ... 276.35 ± 22.25 N (62.1 ± 5.0 lb)
Minimum test force ... 46.72 ± 13.35 N (10.5 ± 3.0 lb)
Free length after test ... 32.43 mm (1.277 inch)
Outside diameter ... 18.54 mm (0.730 inch)
(8) Torque for four plugs ... 65 ± 7 N·m (48 ± 5 lb ft)
(9) 204-1488 Spring
Length under test force ... 17.25 mm (0.679 inch)
Maximum test force ... 70.75 ± 8.00 N (15.9 ± 1.8 lb)
Minimum test force ... 55.18 ± 6.68 N (12.4 ± 1.5 lb)
Free length after test ... 49.40 mm (1.945 inch)
Outside diameter ... 19.30 mm (0.760 inch)
(10) 204-1482 Spring
Length under test force ... 44.86 mm (1.766 inch)
Maximum test force ... 444.11 ± 35.60 N (99.8 ± 8.0 lb)
Minimum test force ... 60.52 ± 17.80 N (13.6 ± 4.0 lb)
Free length after test ... 62.97 mm (2.479 inch)
Outside diameter ... 19.38 mm (0.763 inch)
(11) Torque for the shoulder bolt ... 9.5 ± 1.5 N·m (85 ± 13 lb in)
(12) Torque for two caps ... 122 ± 12 N·m (90 ± 9 lb ft)
(13) Torque for the spool ... 9.5 ± 1.4 N·m (85 ± 12 lb in)
(14) 216-6157 Spring
Free length ... 23.32 mm (0.918 inch)
Outside diameter ... 4.65 mm (0.183 inch)
(15) Torque for the plug ... 25 ± 3 N·m (18 ± 2 lb ft)
Control Valve (Work Tool)
SMCS - 5051
Número de pieza - 258-2509
S/N - RED1-UP
Número de pieza - 258-2509
S/N - MST1-UP
Ver imagen
g01570653
Illustration 1
Front view
Note: Before assembly, all the threads must be clean and free from rust, primer and
paint.
(1) Torque for the O-ring plug ... 14.0 ± 1.4 N·m (125 ± 12 lb in)
Ver imagen
g01570735
Illustration 2
View A-A
(2) 216-6161 Relief Valve Gp
Quantity ... 2
Torque for the relief valve group ... 45 ± 5 N·m (33 ± 4 lb ft)
Pressure setting at 3.79 L/min (1.0 US gpm) ... 27600 ± 345 kPa (4004 ± 50 psi)
(3) 289-0850 Relief Valve Gp
Torque for the relief valve group ... 45 ± 5 N·m (33 ± 4 lb ft)
Pressure setting at 3.79 L/min (1.0 US gpm) ... 31000 ± 345 kPa (4496 ± 50 psi)
(4) 216-6160 Relief Valve Gp
Torque for the relief valve group ... 45 ± 5 N·m (33 ± 4 lb ft)
Pressure setting at 3.79 L/min (1.0 US gpm) ... 24500 ± 345 kPa (3554 ± 50 psi)
Ver imagen
View B-B
(5) Torque for the valve cap ... 142 ± 14 N·m (105 ± 10 lb ft)
(6) Torque for the valve plug ... 9.5 ± 1.4 N·m (85 ± 12 lb in)
(7) 185-4254 Solenoid Valve Gp
Quantity ... 6
Torque for the coil nut ... 13.0 ± 1.5 N·m (115 ± 13 lb in)
Torque for the solenoid valve group ... 40 ± 5 N·m (30 ± 4 lb ft)
Operating voltage ... 12 VDC
Resistance at 25 °C (77 °F) ... 2.2 ± 0.2 Ohms
(D) Orientation of the solenoid valve group ... 20 ± 5 degrees
(8) Torque for two caps ... 122 ± 12 N·m (90 ± 9 lb ft)
(9) Torque for two bolts ... 28 ± 7 N·m (250 ± 60 lb in)
(10) 295-0046 Solenoid Valve Gp
Torque for the nut ... 3.4 ± 0.4 N·m (30 ± 4 lb in)
Torque for the solenoid valve group ... 30 ± 3 N·m (265 ± 27 lb in)
View C-C
View E-E
(11) Torque for three O-ring plugs ... 14.0 ± 1.4 N·m (125 ± 12 lb in)
Control Manifold and Solenoid (Work Tool Positioner)
SMCS - 5264; 5479
Número de pieza - 258-3469
S/N - RED1-UP
Número de pieza - 258-3468
S/N - DWS1-UP
Número de pieza - 258-2802
S/N - MST1-UP
Número de pieza - 258-2801
S/N - JAY1-UP
Número de pieza - 258-3468
S/N - JAY1-UP
Número de pieza - 258-2802
S/N - RED1-UP
Número de pieza - 258-2801
S/N - DWS1-UP
Número de pieza - 258-3469
S/N - MST1-UP
(1) Torque for the nut ... 40.8 to 54.0 N·m (30 to 40 lb ft)
(2) Torque for the nut ... 5.44 to 8.16 N·m (50 to 70 lb in)
Accumulator (Pilot)
SMCS - 5077-PS
Número de pieza - 258-3462
(1) 258-3462 Hydraulic Accumulator Gp
Installation torque for accumulator ... 30 ± 5 N·m (22 ± 4 lb ft)
Charging medium ... Dry Nitrogen
Volume at precharge ... 40 mL (2.4 in3)
Gas volume at maximum working pressure ... 320 mL (19.5 in3)
Oil volume at maximum working pressure ... 280 mL (17.1 in3)
Precharge pressure ... 900 ± 100 kPa (130 ± 14 psi)
Service pressure ... 7200 kPa (1044 psi)
Working temperature range ... −30 °C to 121 °C (−22 °F to 250 °F)
Control Manifold (Pilot Shutoff)
SMCS - 5264; 5479
Número de pieza - 274-8563
(1) 6E-4701 Check Valve Gp
Maximum operating pressure ... 34500 kPa (5000 psi)
Cracking pressure ... 34 ± 21 kPa (5 ± 3 psi)
Gear Motor (Fan, Demand)
SMCS - 1386-GT
Número de pieza - 258-2579
Ver imagen
g01547515
Illustration 1
Rotation ... Clockwise
Displacement per revolution ... 14.53 cc (0.9 in3)
Maximum continuous pressure ... 15000 kPa (2200 psi)
Intermittent pressure ... 18000 kPa (2600 psi)
Peak pressure ... 20000 kPa (2900 psi)
Minimum operating temperature ... -40 °C (-40 °F)
Maximum operating temperature for continuous operation ... 93 °C (199 °F)
Maximum operating temperature for intermittent operation ... 105 °C (221 °F)
Speed at 15000 kPa (2175.6 psi) ... 500 to 3500 rpm
(1) Torque for the bolt ... 30 ± 7 N·m (22 ± 5 lb ft)
(2) Torque for four bolts ... 45 N·m (33 lb ft)
(3) 277-8862 Solenoid Valve Gp
Torque for the solenoid valve group ... 48 ± 2 N·m (35 ± 1 lb ft)
Torque for the nut ... 6.1 ± 0.7 N·m (55 ± 6 lb in)
Gear Motor (Fan, Aftercooler)
SMCS - 1386-GT
Número de pieza - 258-2513
S/N - RED1-UP
(1) 258-2926 Gear Motor
Direction of rotation ... CW
Displacement ... 4 cc/rev (0.2 in3/rev)
Maximum continuous pressure ... 15000 kPa (2200.0 psi)
Maximum intermittent pressure ... 18000 kPa (2600.0 psi)
Maximum peak pressure ... 20000 kPa (2900.0 psi)
Minimum operating temperature ... −40 °C (−40.0 °F)
Maximum temperature for continuous operation ... 93 °C (200.0 °F)
Maximum temperature for intermittent operation ... 105 °C (221.0 °F)
(2) Inlet port
(3) 228-9240 Relief Valve
Torque for solenoid valve ... 35 N·m (26 lb ft)
Maximum pressure ... 21000 kPa (3046 psi)
Torque for the adjustment screw ... 7 N·m (62 lb in)
(4) Outlet port
(5) Torque for bolt ... 30 ± 7 N·m (22 ± 5 lb ft)
(6) Torque for 4 bolts ... 45 N·m (33 lb ft)
Lift Cylinder
SMCS - 5102
Número de pieza - 258-2516
S/N - RED1-UP
Número de pieza - 258-2516
S/N - MST1-UP
Ver imagen
g01024293
Illustration 1
(1) Inner diameter of the rod eye ... 38.20 ± 0.05 mm (1.504 ± 0.002 inch)
(2) Before assembly, apply 9S-3263 Thread Lock Compound to the head of the
cylinder. Torque for the head ... 295 ± 25 N·m (217.6 ± 18.4 lb ft)
(3) Basic diameter of the rod ... 45 mm (1.8 inch)
(4) Basic inner diameter of the hydraulic cylinder ... 65 mm (2.6 inch)
(5) The distance across the flats of the piston head is 46 mm (1.8 inch). Torque for the
piston head end of the rod ... 805 ± 25 N·m (593.7 ± 18.4 lb ft)
(6) Before assembly, apply 9S-3263 Thread Lock Compound to the setscrew. Torque
for the setscrew ... 22.5 ± 2.5 N·m (17.0 ± 2.0 lb ft)
(7) Diameter of the hole in the trunnion end ... 44.55 ± .05 mm (1.75 ± 0.002 inch)
(8) Extended length of the cylinder ... 2172.9 ± 2 mm (85.55 ± 0.08 inch)
(9) Closed length of the cylinder ... 1203 ± .75 mm (47.362 ± 0.030 inch)
(10) Stroke of the cylinder ... 620 ± 1.25 mm (24.409 ± 0.049 inch)
Tilt Cylinder - Left Hand
SMCS - 5104
Número de pieza - 258-2515
Ver imagen
g01568153
Illustration 1
Note: All bores must be free of paint. Use 5P-0960 Grease Cartridge to lubricate all the
bores.
(A) Bore of the cap end ... 38.20 ± 0.05 mm (1.504 ± 0.002 inch)
Note: Apply 4C-4030 Thread Lock Compound to the threads of the set screw (1) .
(1) Torque for the set screw ... 22.5 ± 2.5 N·m (17 ± 2 lb ft)
(2) Piston
The distance across the flats of the piston ... 60 mm (2.4 inch)
Torque for the piston ... 525 ± 25 N·m (390 ± 18 lb ft)
(B) Bore of the cylinder assembly ... 75 mm (3.0 inch)
(C) Outside diameter of the rod assembly ... 35 mm (1.4 inch)
Note: Apply 4C-4030 Thread Lock Compound to the threads of the gland (3) .
(3) Torque for the gland ... 325 ± 25 N·m (240 ± 18 lb ft)
(4) 3K-2151 Sleeve Bearing
Inside diameter ... 38.260 ± 0.020 mm (1.5063 ± 0.0008 inch)
Outside diameter ... 50.864 ± 0.013 mm (2.0025 ± 0.0005 inch)
(D) Length of stroke ... 391.50 ± 1.25 mm (15.413 ± 0.049 inch)
(E) Closed length ... 640.00 ± 0.85 mm (25.197 ± 0.033 inch)
Tilt Cylinder - Right Hand
SMCS - 5104
Número de pieza - 258-2514
Ver imagen
g01566993
Illustration 1
Note: All bores must be free of paint. Use 5P-0960 Grease Cartridge to lubricate all the
bores.
(A) Bore of the cap end ... 38.20 ± 0.05 mm (1.504 ± 0.002 inch)
Note: Apply 4C-4030 Thread Lock Compound to the threads of the set screw (1) .
(1) Torque for the set screw ... 22.5 ± 2.5 N·m (17 ± 2 lb ft)
(2) Piston
The distance across the flats of the piston ... 60 mm (2.4 inch)
Torque for the piston ... 525 ± 25 N·m (390 ± 18 lb ft)
(B) Bore of the cylinder assembly ... 75 mm (3.0 inch)
(C) Outside diameter of the rod assembly ... 35 mm (1.4 inch)
Note: Apply 4C-4030 Thread Lock Compound to the threads of the gland (3) .
(3) Torque for the gland ... 325 ± 25 N·m (240 ± 18 lb ft)
(4) 3K-2151 Sleeve Bearing
Inside diameter ... 38.260 ± 0.020 mm (1.5063 ± 0.0008 inch)
Outside diameter ... 50.864 ± 0.013 mm (2.0025 ± 0.0005 inch)
(D) Length of stroke ... 391.50 ± 1.25 mm (15.413 ± 0.049 inch)
(E) Closed length ... 640.00 ± 0.85 mm (25.197 ± 0.033 inch)
Coupler Cylinder
SMCS - 5133
Número de pieza - 192-2640
Ver imagen
g01543134
Illustration 1
Note: Before assembly, all bores must be free of paint. Apply 5P-0960 Grease
Cartridge to all the bores.
(A) Bore of the cap end ... 14.50 to 14.60 mm (0.571 to 0.575 inch)
(B) Bore of the cylinder assembly ... 35 mm (1.4 inch)
(C) Outside diameter of the rod assembly ... 15 mm (0.6 inch)
(D) Bore of the rod eye ... 12.50 to 12.60 mm (0.492 to 0.496 inch)
(E) Length of stroke ... 103.5 ± 1.5 mm (4.07 ± 0.06 inch)
(F) Closed length ... 174.0 ± 1.2 mm (6.85 ± 0.05 inch)
Extended length ... 277.5 ± 2.5 mm (10.93 ± 0.10 inch)
Lift Arm Cylinder and Mounting
SMCS - 5102-MT ; 5102; 5104-MT ; 5104; 6119-S/C
Número de pieza - 258-2699
S/N - RED1-UP
Ver imagen
g01560828
Illustration 1
Note: Before assembly, all the pins, the bores and the bearings must be clean. Use 5P-
0960 Grease Cartridge in order to coat all the pins, the bores and the bearings. Lubricate
the entire cylindrical surface of all the pins.
(1) 258-2920 Pin As
Quantity ... 4
Pin diameter ... 44.38 ± 0.03 mm (1.747 ± 0.001 inch)
Length of the pin assembly ... 220 mm (8.7 inch)
(2) 142-9094 Pin
Pin diameter ... 38.03 ± 0.03 mm (1.497 ± 0.001 inch)
Length of the pin ... 120.0 ± 1.0 mm (4.72 ± 0.04 inch)
(3) 258-2679 Pin As
Quantity ... 2
Pin diameter ... 38.03 ± 0.03 mm (1.497 ± 0.001 inch)
Length of the pin assembly ... 154 mm (6.1 inch)
(4) 258-3451 Pin
Pin diameter ... 38.03 ± 0.03 mm (1.497 ± 0.001 inch)
Length of the pin ... 140.0 ± 1.0 mm (5.51 ± 0.04 inch)
(5) 142-9091 Pin As
Quantity ... 2
Pin diameter ... 38.03 ± 0.03 mm (1.497 ± 0.001 inch)
Length of the pin assembly ... 125.0 mm (4.92 inch)
(6) 258-2922 Pin As
Quantity ... 2
Pin diameter ... 38.03 ± 0.03 mm (1.497 ± 0.001 inch)
Length of the pin assembly ... 144.2 mm (5.68 inch)
Ver imagen
g01566518
Illustration 2
View of area A
(7) 285-2185 Pin As
Pin diameter ... 11.1 mm (0.44 inch) (B) Free length ... 101.5 mm (4.00 inch)
Quick Coupler
SMCS - 6129
Número de pieza - 258-2500
Ver imagen
(1) 192-2645 Spring
Quantity ... 2
Free length after test ... 88.9 mm (3.50 inch)
Outside diameter ... 32.1 mm (1.26 inch)
(2) Coat the bores with 5P-0960 Grease Cartridge before assembly of the pins.
(3) 159-5797 Spring
Quantity ... 2
Length under test force ... 28 mm (1.1 inch)
Free length after test ... 36.2 mm (1.43 inch)
Outside diameter ... 31.75 mm (1.250 inch)
Control Manifold (Quick Coupler)
SMCS - 5264; 5479
Número de pieza - 291-0010
Ver imagen
(1) Final installation torque for the nut ... 5.8 ± 1.0 N·m (50 ± 9 lb in)
(2) 274-8044 Solenoid Valve Gp
Operating voltage ... 12 VDC
Resistance at 25 ± 5 °C (77 ± 9 °F) ... 10.3 ± 0.6 Ohms
(3) Torque for the solenoid valve group ... 30 ± 3 N·m (265 ± 27 lb in)
Axle
SMCS - 3278
Número de pieza - 258-2957
S/N - DWS1-UP
Número de pieza - 259-2957
S/N - RED1-UP
Número de pieza - 258-2957
S/N - JAY1-UP
Número de pieza - 258-2957
S/N - MST1-UP
(1) Pack the bearings with 1P-0808 Multipurpose Grease prior to installation.
(2) Before the installation of seals (2), fill cavities with 1P-0808 Multipurpose Grease.
(3) Maximum end play ... 0.254 mm (0.01 inch)
(4) Fill the cavity with 1P-0808 Multipurpose Grease. ... 0.7 L (0.7 qt)
(5) Apply a 3 mm (0.12 inch) continuous bead of 8T-9022 Silicone Gasket to the
spindle flange prior to the press fit or the shell.
(6) Torque for plug ... 60 N·m (44 lb ft)
(7) Install the eight 142-9036 Nuts onto each axle in the above order.
Torque for the nuts ... 160 ± 15 N·m (120.0 ± 11.0 lb ft)
The nuts should be rotated an additional 60 ± 5 degrees after the nuts have been
torqued.
Tandem Drive
SMCS - 3007
Número de pieza - 258-2862
S/N - DWS1-UP
Número de pieza - 258-2862
S/N - MST1-UP
Número de pieza - 258-2860
S/N - DWS1-UP
Número de pieza - 258-2960
S/N - RED1-UP
Número de pieza - 258-2860
S/N - MST1-UP
Número de pieza - 258-2860
S/N - JAY1-UP
Número de pieza - 258-2862
S/N - JAY1-UP
Ver imagen
(1) Install each stud until the flange seats firmly against the inside surface of the chain
box.
Ver imagen
(2) Measure the play (B) in the chain on the slack side of the chain (C). Side (D) is the
taut side of the chain. Play (B) for the chain ... 12.5 ± 2.5 mm (0.49 ± 0.10 inch)
(3) Orient the chamfers of the 165-4892 Spacers toward the hydraulic motors.
