Datasheet

AUO
G215HVN01.0 (S11) / (S03)

UP-02-086 (P/N 97.21G01.000-S11, before EC) valid till 30.07.2014

UP-02-086R1.1 (P/N 97.21G01.001-S03, after EC) valid from 31.07.2014

The information contained in this document has been carefully researched and is, to the best
of our knowledge, accurate. However, we assume no liability for any product failures or
damages, immediate or consequential, resulting from the use of the information provided
herein. Our products are not intended for use in systems in which failures of product could
result in personal injury. All trademarks mentioned herein are property of their respective
owners. All specifications are subject to change without notice.
 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

□ Preliminary Specification
■Final Specification

Module 21.5” Color TFT-LCD

Model Name G215HVN01.0

Customer Date Approved by Date

Crystal Hsieh 2014/09/05

Checked &
Prepared by
Approved by

Jimmy Tsai 2014/09/05

Note: This Specification is subject to change General Display Business Division / AU

without notice. Optronics corporation

document version 1.5 1

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

Contents

1. Operating Precautions ......................................................................................5

2. General Description ..........................................................................................6
2.1 Display Characteristics ...................................................................................................... 6
2.2 Optical Characteristics....................................................................................................... 7
3. Functional Block Diagram ..............................................................................11
4. Absolute Maximum Ratings............................................................................12
4.1 TFT LCD Module ............................................................................................................. 12
4.2 Backlight Unit................................................................................................................... 12
5. Electrical Characteristics................................................................................14
5.1 TFT LCD Module ............................................................................................................. 14
5.2 Backlight Unit................................................................................................................... 16
6. Signal Characteristic.......................................................................................17
6.1 Pixel Format Image ......................................................................................................... 17
6.2 Signal Description............................................................................................................ 18
6.3 The Input Data Format .................................................................................................... 19
6.4 Interface Timing ............................................................................................................... 20
6.5 Power ON/OFF Sequence............................................................................................... 21
7. Connector & Pin Assignment .........................................................................22
7.1 TFT LCD Module: LVDS Connector ................................................................................ 22
7.2 Backlight Unit: LED Connector ........................................................................................ 23
8. Reliability Test .................................................................................................24
9. Mechanical Characteristics ............................................................................25
10. Label and Packaging.....................................................................................26
10.1 Shipping Label (on the rear side of TFT-LCD display)................................................... 26
10.2 Carton Package............................................................................................................. 26
11. Safety .............................................................................................................27
11.1 Sharp Edge Requirements............................................................................................. 27
11.2 Materials ........................................................................................................................ 27
11.3 Capacitors...................................................................................................................... 27
11.4 National Test Lab Requirement...................................................................................... 27

document version 1.5 2

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

Record of Revision

Version and Date Page Old description New Description Remark

0.1 2011/11/03 All First Edition All
26
0.2 2012/02/03

1.0 2012/11/23 5, 15
6, 11 Operating Temp: 0 to Operating Temp: 0 to +60C
+50C
15

15
1.1 2013/12/03

20

22 Back light dimming, 3.3V Back light dimming

1.2 2014/06/24 6 Contrast ratio: 5,000 (typ.) Contrast ratio: 3,000 (typ.)
17

1.3 2014/07/31 6

24 Thickness = 16.85 mm (typ.) Update drawing (t=12.7 mm)

1.4 2014/08/08 5

15
15 LED q’ty= 60 pcs LED q’ty= 65 pcs

25

1.5 2014/09/05 6, 7 Contrast ratio: 3,000 (typ.) Contrast ratio: 5,000 (typ.)

20

document version 1.5 3

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

23

(components face up) (components face down)

document version 1.5 4

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

1. Operating Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) In case if a Module has to be put back into the packing container slot after once it was taken
out from the container, take it easily, or the TFT Module may be damaged.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
10) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT
Module may be damaged.
11) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
12) Severe temperature condition may result in different luminance, response time and LED life
time.
13) The data on this specification sheet is applicable when LCD module is placed in landscape
position.
14) Continuous displaying fixed pattern may induce image sticking. It is recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the screen.

document version 1.5 5

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

2. General Description
This specification applies to the 21.5 inch-wide Color TFT-LCD Module G215HVN01.0. The
display supports the Full HD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 8-bits
data). All input signals are dual channel LVDS interface.
LED driver board is included. G215HVN01.0 is designed for industrial display applications.

2.1 Display Characteristics

The following items are characteristics summary on the table under 25℃ condition:

ITEMS Unit SPECIFICATIONS

Screen Diagonal [mm] 546.86(21.53”)
Active Area [mm] 476.64 (H) x 268.11 (V)
Pixels H x V 1920(x3) x 1080
Pixel Pitch [um] 248.25 (per one triad) ×248.25
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode VA Mode, Normally Black
2
White Luminance ( Center ) [cd/m ] 300 (Typ.)
Contrast Ratio 5000 (Typ.)
Optical Response Time [msec] 25 ms (Typ., on/off)
Nominal Input Voltage [Volt] +5.0 V
Backlight Input Voltage [Volt] +12.0 V
Power Consumption [Watt] 19.82 W (Typ. Cell 3.5 + LED 16.32)
(with LED driver board, all white pattern)
Weight [Grams] 2300 (max.)
Physical Size [mm] 495.6(W) × 292.2(H) × 12.7(D)
Electrical Interface Dual channel LVDS
Support Color 16.7M colors (RGB 8 bits)
Surface Treatment Anti-Glare, 3H
Temperature Range
Operating [oC] 0 to +60
o
Storage (Non-Operating) [ C] -20 to +60
RoHS Compliance RoHS Compliance
TCO Compliance TCO 5.1 Compliance

document version 1.5 6

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

2.2 Optical Characteristics

The optical characteristics are measured under stable conditions at 25℃:

Item Unit Conditions Min. Typ. Max. Note

[degree] Horizontal (Right) 75 89 -
CR = 10 (Left) 75 89 -
Viewing Angle 1, 2
[degree] Vertical (Upper) 75 89 -
CR = 10 (Lower) 75 89 -
Contrast ratio Normal Direction 3000 5000 - 3
Raising Time (TrR) - 20 25
Response Time [msec] Falling Time (TrF) - 5 10
4
Raising + Falling - 25 35
Red x 0.589 0.639 0.689
Red y 0.283 0.333 0.383
Color / Chromaticity Green x 0.253 0.303 0.353
Coordinates (CIE) Green y 0.573 0.623 0.673
5
Blue x 0.105 0.155 0.205
Blue y 0.000 0.048 0.098
Color Coordinates (CIE) White White x 0.263 0.313 0.363
White y 0.279 0.329 0.379
2
Central Luminance [cd/m ] 240 300 - 6
Luminance Uniformity [%] 75 80 - 7
Crosstalk (in 60Hz) [%] 1.5 8
Flicker dB -20 9

document version 1.5 7

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

Note 1: Measurement method

Before measuring, the LCD module should be turn on 30 minutes at room temperature. In order to
stabilize the luminance, the measurement should be executed after lighting Backlight for 30
minutes in a stable, windless and dark room.

Photo detector

Measured distance

LCD Panel TFT-LCD Module

Center of the screen

Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)

Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180°
horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is
broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low
(down). The measurement direction is typically perpendicular to the display surface with the
screen rotated about its center to develop the desired measurement viewing angle.

document version 1.5 8

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

Note 3: Contrast ratio is measured by TOPCON SR-3

Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full
Black” to “Full White” (rising time, TrR), and from “Full White” to “Full Black” (falling time, TrF),
respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of
amplitudes.
% T rF T rR

100
90
Optical
White Black Black White
response
10
0
1 Frame 1 Frame

Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3

Note 6: Central luminance is measured by TOPCON SR-3
Note 7: Luminance uniformity of these 9 points is defined as below and measured by
TOPCON SR-3

Minimum Luminance in 9 points (1 - 9)

Uniformity 
Maximum Luminance in 9 Points (1 - 9)
document version 1.5 9
 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

Note 8: Crosstalk is defined as below and measured by TOPCON SR-3

CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)

Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3

GBRGB
R Gray Level = L127

RGBRGB

Gray Level = L0
RGBRGB

Method: Record dB value with TRD-100

Amplitude
AC

DC

Time
AC Level(at 30 Hz)
Flicker (dB)  20 log
DC Level

document version 1.5 10

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

3. Functional Block Diagram

The following diagram shows the functional block of this model.

VLED(+ 12V)
I/F + X-PCB LED driver board

Gamma
DC/DC Correction
Converter

VDD D1 D5760
AUO ASIC LED B/L
(+5V) G1 X-Driver IC

TFT-LCD

Y-Driver IC
Connector

LVDS Timing
LVDS Receiver Controller 1920*(3)*1080
Pixels

G1080

LVDS Connector: JAE (FI-XB30SRL-HF11) or equivalent.

LED Connector: Sin Sheng (MS24049HJ )or equivalent.

document version 1.5 11

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

4. Absolute Maximum Ratings

4.1 TFT LCD Module
Item Symbol Min Max Unit Conditions

Logic/LCD Drive
VDD 0 5.5 [Volt] Note 1,2
Voltage

4.2 Backlight Unit

Item Symbol Min Max Unit Conditions

LED Input Voltage VLED 10.8 13.2 [Volt] Note 1,2

4.3 Absolute Ratings of Environment

Item Symbol Min. Max. Unit Conditions
o
Operating Temperature TOP 0 +60 [ C]
Operation Humidity HOP 5 90 [%RH]
o
Note 3 & 4
Storage Temperature TST -20 +60 [ C]
Storage Humidity HST 5 90 [%RH]

Note 1: With in Ta (25℃)

Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: For quality performance, please refer to AUO IIS (Incoming Inspection Standard).

document version 1.5 12

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

Operating Range Storage Range

Note 4: Operation Temperature + 60°C is defined as panel surface termperature.

document version 1.5 13

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Symbol Parameter Min Typ Max Unit Conditions
Logic/LCD Drive
VDD 4.5 5.0 5.5 [Volt] +/-10%
Voltage
VDD= 5.0V,All white
- 0.7 0.8 [A]
pattern, At 60Hz
IDD Input Current
VDD= 5.0V, All white
0.81 0.89 [A]
pattern At 75Hz,
VDD= 5.0V,All white
- 3.5 4.4 [Watt]
pattern, At 60Hz
PDD VDD Power
VDD= 5.0V, All white
4.05 4.9 [Watt]
pattern At 75Hz,

IRush Inrush Current - - 3 [A] Note 1

Allowable Logic/LCD VDD= 5.0V, All white

VDDrp - - 500 [mV] p-p
Drive Ripple Voltage Pattern At 75Hz

Note 1: Measurement conditions:

The duration of rising time of power input is 470us.

90% 5.0V

10%
VDD rising time 0V
0.47 ms

document version 1.5 14

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

5.1.2 Signal Electrical Characteristics

Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of
SN75LVDS82DGG (Texas Instruments) in detail.

Symbol Parameter Min Typ Max Units Condition

Differential Input High VCM = 1.2V,
VTH - - +100 [mV]
Threshold Note 1
Differential Input Low VCM = 1.2V
VTL -100 - - [mV]
Threshold Note 1
Input Differential
│VID│ 100 - 600 [mV] Note 1
Voltage
Differential Input VTH-VTL = 200MV (max)
VCM +1.0 +1.2 +1.5 [V]
Common Mode Voltage Note 1

Note 1: LVDS Signal Waveform

│VID│

VICM

VSS

document version 1.5 15

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

5.2 Backlight Unit

5.2.1 LED Driver
Following characteristics are measured under stable condition at 25℃ (Room Temperature).

Symbol Parameter Min Typ Max Unit Remark

VLED Input Voltage 10.8 12 13.2 Volt

ILED Input Current - 1.36 - A 100% Dimming

PLED Power Consumption - 16.32 19.95 Watt 100% Dimming

Backlight Dimming Frequency 200 - 20k Hz

Dimming Swing Voltage 4.8 5 5.5 Volt
(PWM Mode) Dimming Duty Cycle 10 - 100 %

Backlight
Dimming Dimming Voltage 1.5 - 5 Volt Adjustable Dimming Range
(Analog Mode)

Backlight On Control Voltage 3 - 5.5 Volt

on\off Off Control Voltage 0 - 0.8 Volt

o
IF LED Forward Current - 80 - mA Ta = 25 C, Note1
o
Operating Life 50000 - - Hrs Ta = 25 C, Note4
Note 1: Ta means ambient temperature.
Note 2: If module is driven by high current or at high ambient temperature & humidity condition. The operating life will be
reduced.
Note 3: LED light bar structure: (5 strings x 13pcs / string =65pcs LED)
Note 4: Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated
data.

document version 1.5 16

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.

1 2 1919 1920

1st Line R G B R G B R GB R G B

1080 Line R G B R G B R GB R G B

document version 1.5 17

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

6.2 Signal Description

The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential
signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative
edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx)
transmits even pixels.

PIN # SIGNAL NAME DESCRIPTION

1 RXinO0- Negative LVDS differential data input (Odd data)
2 RXinO0+ Positive LVDS differential data input (Odd data)
3 RXinO1- Negative LVDS differential data input (Odd data)
4 RXinO1+ Positive LVDS differential data input (Odd data)
5 RXinO2- Negative LVDS differential data input (Odd data, H-Sync, V-Sync, DSPTMG)
6 RXinO2+ Positive LVDS differential data input (Odd data, H-Sync, V-Sync, DSPTMG)
7 GND Power Ground
8 RxOCLKIN- Negative LVDS differential clock input (Odd clock)
9 RxOCLKIN+ Positive LVDS differential clock input (Odd clock)
10 RXinO3- Negative LVDS differential data input (Odd data)
11 RXinO3+ Positive LVDS differential data input (Odd data)
12 RXinE0- Negative LVDS differential data input (Even data)
13 RXinE0+ Positive LVDS differential data input (Even data)
14 GND Power Ground
15 RXinE1- Negative LVDS differential data input (Even data)
16 RXinE1+ Positive LVDS differential data input (Even data)
17 GND Power Ground
18 RXinE2- Negative LVDS differential data input (Even data)
19 RXinE2+ Positive LVDS differential data input (Even data)
20 RxECLKIN- Negative LVDS differential clock input (Even clock)
21 RxECLKIN+ Positive LVDS differential clock input (Even clock)
22 RXinE3- Negative LVDS differential data input (Even data)
23 RXinE3+ Positive LVDS differential data input (Even data)
24 GND Power Ground
25 NC No connection (for AUO test only. Do not connect)
26 NC No connection (for AUO test only. Do not connect)
27 NC No connection (for AUO test only. Do not connect)
28 VDD Power +5V
29 VDD Power +5V
30 VDD Power +5V

document version 1.5 18

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

6.3 The Input Data Format

Note1: 8-bits signal input.

Note2: L:NS alike H:Thine alike

document version 1.5 19

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

6.4 Interface Timing

6.4.1 Timing Characteristics

Signal Item Symbol Min Typ Max Unit

Clock Frequency 1/ TClock 40 72 83 MHz

Frame Rate Frequency F 50 60 75 Hz

Period TV 1092 1130 1653
Vertical
Active TVD 1080 1080 1080 T_line
Section
Blanking TVB 12 50 573

Period TH 1004 1050 1100

Horizontal
Active THD 960 960 960 T_clock
Section
Blanking THB 44 90 140
Note: DE mode only.
Note: Typical value refer to VESA STANDARD

6.4.2 Input Timing Diagram

TCLOCK Input Timing Definition ( DE Mode)

DOTCLK

Input Invaild Pixel Pixel Pixel Pixel Pixel Invaild Pixel

Data Data 1 2 3 N-1 N Data 1

DE
THB THD

TH

DE
TVB
TVD

TV

document version 1.5 20

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

6.5 Power ON/OFF Sequence

VDD power and B/L on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system
shall be Hi-Z state or low level when VDD is off.

Power ON/OFF sequence timing

Value
Parameter Units
Min. Typ. Max.
T1 0.5 -- 10 [ms]
T2 30 40 50 [ms]
T3 200 -- -- [ms]
T4 0.5 -- 10 [ms]
T5 10 -- -- [ms]
T6 10 -- -- [ms]
T7 0 -- -- [ms]
T8 10 -- -- [ms]
T9 -- -- 10 [ms]
T10 110 -- -- [ms]
T11 0 16 50 [ms]
T12 -- -- 10 [ms]
T13 1000 -- -- [ms]

The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off
the power when you plug the cable into the input connector or pull the cable out of the connector.

document version 1.5 21

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

7. Connector & Pin Assignment

Physical interface is described as for the connector on module. These connectors are capable of accommodating the
following signals and will be following components.

7.1 TFT LCD Module: LVDS Connector

Connector Name / Designation Interface Connector / Interface card

JAE or compatible
Manufacturer
JAE (FI-XB30SRL-HF11) or equivalent
Type Part Number

Mating Housing Part Number FI-X30HL (JAE) or compatible

Pin# Signal Name Pin# Signal Name

1 RxOIN0- 2 RxOIN0+
3 RxOIN1- 4 RxOIN1+
5 RxOIN2- 6 RxOIN2+
7 GND 8 RxOCLKIN-
9 RxOCLKIN+ 10 RxOIN3-
11 RxOIN3+ 12 RxEIN0-
13 RxEIN0+ 14 GND
15 RxEIN1- 16 RxEIN1+
17 GND 18 RxEIN2-
19 RxEIN2+ 20 RxECLKIN-
21 RxECLKIN+ 22 RxEIN3-
23 RxEIN3+ 24 GND
25 NC 26 NC
27 NC 28 VDD
29 VDD 30 VDD

document version 1.5 22

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

7.2 Backlight Unit: LED Connector

Connector Name / Designation LED Connector

Manufacturer Sin Sheng or compatible

Connector Model Number MS24049HJ or equivalent

Mating Model Number P24049 or compatible

PIN # SIGNAL NAME DESCRIPTION

1 GND Ground
2 GND Ground
3 GND Ground
4 BL_DIM_P Back light dimming
5 BL_EN Back light enable
6 --- NC
7 VLED Input voltage, 12V
8 VLED Input voltage, 12V
9 VLED Input voltage, 12V

document version 1.5 23

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

8. Reliability Test
Environment test conditions are listed as following table.

Items Required Condition Note

Temperature Humidity Bias (THB) Ta= 50℃, 80%RH, 300hours
High Temperature Operation (HTO) Ta= 60℃, 300hours
Low Temperature Operation (LTO) Ta= 0℃, 300hours
High Temperature Storage (HTS) Ta= 60℃, 300hours
Low Temperature Storage (LTS) Ta= -20℃, 300hours

Acceleration: 1.5 Grms

Vibration Test Wave: Random
(Non-operation) Frequency: 10 - 200 Hz
Duration: 30 Minutes each Axis (X, Y, Z)

Acceleration: 50 G
Shock Test Wave: Half-sine
(Non-operation) Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis)

Drop Test Height: 46 cm, package test

Thermal Shock Test (TST) -20℃/30min, 60℃/30min, 100 cycles 1
On/Off Test On/10sec, Off/10sec, 30,000 cycles

Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,

15 points, 25 times/ point.
ESD (Electro Static Discharge) 2
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
15 points, 25 times/ point.

Operation:10,000 ft
Altitude Test
Non-Operation:30,000 ft

Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid temperature change.
A cycle of rapid temperature change consists of varying the temperature from -20℃ to 60℃, and back again. Power is
not applied during the test. After temperature cycling, the unit is placed in normal room ambient for at least 4 hours
before power on.

Note2: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost Self-recoverable.
No hardware failures.

document version 1.5 24

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

9. Mechanical Characteristics

document version 1.5 25

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

10. Label and Packaging

10.1 Shipping Label (on the rear side of TFT-LCD display)

G215HVN01.0

*xxxxxxxxxxxx - xxxxxx*

10.2 Carton Package

Max capacity：9 pcs per carton

Max weight: 20.7 kg per carton
Outside dimension of carton: 570mm*275mm*395mm
Pallet size：1150mm*840mm*132mm

Box stacked:
Module by air：(2 *3) *3 layers，one pallet put 18 boxes，total 162pcs.
Module by sea (I)：One pallet (2 *3) *3 layers + One pallet (2 *3) *1 layers，total 216 pcs.
Module by sea (II) : One pallet (2 *3) *3 layers + One pallet (2 *3) *2 layers，Total 270 pcs.

document version 1.5 26

 Product Specification G215HVN01.0
AU OPTRONICS CORPORATION

11. Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.

11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used,
they will be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the
module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability
rating will be printed on the printed circuit board.

11.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them from
being inserted backwards.

11.4 National Test Lab Requirement

The display module will satisfy all requirements for compliance to:

UL 1950, First Edition U.S.A. Information Technology Equipment

document version 1.5 27

Our company network supports you worldwide with offices in Germany, Great Britain, Italy, Turkey and the
USA. For more information please contact:

Distec GmbH Display Technology Ltd.

Augsburger Str. 2b 5 The Oaks Business Village
82110 Germering Revenge Road, Lordswood
Germany Chatham, Kent, ME5 8LF
United Kingdom
Phone: +49 (0)89 / 89 43 63-0 Phone: +44 (0)1634 / 67 27 55
Fax: +49 (0)89 / 89 43 63-131 Fax: +44 (0)1634 / 67 27 54
E-Mail: info@datadisplay-group.de E-Mail: info@datadisplay-group.co.uk
Internet: www.datadisplay-group.de Internet: www.datadisplay-group.co.uk

Apollo Display Technologies, Corp.

87 Raynor Avenue, Unit 1Ronkonkoma, NY
11779
United States of America
Phone: +1 631 / 580-43 60
Fax: +1 631 / 580-43 70
E-Mail: info@datadisplay-group.com
Internet: www.datadisplay-group.com

Sales Partner: Sales Partner:

REM Italy s.a.s. DATA DISPLAY BİLİŞİM TEKNOLOJİLERİ

di Michieletto Flavio & C. İÇ VE DIŞ TİCARET LİMİTED ŞİRKETİ
Via Obbia Bassa, 10 Barbaros Mh Ak Zamabak Sk A Blok
I-35010 Trebaseleghe (PD) D:143 Ataşehir/İstanbul
Italy Turkey
Phone: +39 335 521 37 89 Phone: +90 (0)216 / 688 04 68
E-Mail: info@remitaly.com Fax: +90 (0)216 / 688 04 69
Internet:www.remitaly.com E-Mail: info@data-display.com.tr
Internet:www.data-display.com.tr