Scribd
Upload
81 views1 page

Apollo 4 1 24

The document reports on an examination of a terrain hydraulic truck crane. It provides details on the owner, address, distinguishing marks, SWL capacity, dates of last use and inspection, and test results which found the crane functioning properly with no defects affecting the safe working load.

Uploaded by

fabulousfacts28
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
81 views1 page

Apollo 4 1 24

The document reports on an examination of a terrain hydraulic truck crane. It provides details on the owner, address, distinguishing marks, SWL capacity, dates of last use and inspection, and test results which found the crane functioning properly with no defects affecting the safe working load.

Uploaded by

fabulousfacts28
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

REPORT OF EXAMINATION OF LIFTING MACHINE/TACKLE

CERTIFICATE NO.M-I-3171
1. Name of Owner M/s Appolo Cranes Pvt. Ltd., c/o M/s Freight Wings (L&T Site)

2. Address of Site Site: DMRC DC-09 Projects, Kishangarh, New Delhi

3. Distinguishing number or mark if . TERRAIN HYDRAULIC TRUCK CRANE - Make : TEREX - Model : AC 200-1.
ALL
any and description sufficient to Max. original SWL cap. 200 MT on basic boom of 12.4 mtrs and 3 mtrs basic radius with
identify the lifting machine, chain heavy lift accessories. Max. present SWL capacity 54 MT on basic boom and basic radius
, rope or tackle in 6 part rope 21 mm dia. with 68.5 MT counterweight. Regd. No. NL04D 6363.

4. Date when the lifting Machine, As per owner's record


chain rope or tackle was first
taken into use at site

5. Details of certificate relating to As per Manufacturer's Test Certificate


tests and examinations done by
manufacturer

6. Date of last periodical thorough As per owner's record


Examination and by whom
Carried out

7. Date of annealing or other Not Applicable


Heat Treatment of the chain or
tackle

8. Particulars of any defects Crane tested on a load of 18.4 MT on 37.8 mtr boom and 27.5 mtr radius where
affecting the safe working load overload cut off kicked in.Tested succesfully on overload at same load and
found at current examination boom by increasing radius to 27.8 mtr. SLI fitted and working satisfactorily.
and the steps to remedy the
defects

It is certified that on 4th January 2024 this Lifting Machine/Tackle was thoroughly examined and the above is a correct
report of the result.

Next Inspection Due as per DMRC norms : 4th July 2024

Subject to Disclaimer below

VARUN BHILOTRA
B.Tech. (Mech.)
“COMPETENT PERSON”

DISCLAIMER: This Report of examination reflects the condition of the machine/ equipment as on date. We accept
no liability / responsibility whatsoever in case of any accident / mishap on/with/ due to this machine / equipment

You might also like