960418 PARTS LIST

BLACKMER PARTS LIST Page 1 of 2 501-C01_0608

PUMP MODELS: LGLD2E, LGL2E, LGLD3E, LGL3E Section 501
DISCONTINUED MODELS: TLGLD2E, TLGLD3E Effective Aug 2006
(See Instructions 501-C00 for Installation, Operation and Maintenance) Replaces Mar 2005

This document is for discontinued models TLGLD2E and TLGLD3E.

Parts availablility may be limited.

LOCKNUT TOOL

Parts Parts
Ref. Size 2 Size 3 Ref. Size 2 Size 3
Description Per Description Per
No. Part No. Part No. No. Part No. Part No.
Pump Pump
1
4 Cover - Relief Valve (R/V) 1 414401 415113 35 Key - Shaft 1 909130 1 909130
2
5 Capscrews - R/V Cover 6 920331 920331 41 Liner 1 184405 2 185111
8 Spring - R/V 1 471423 475135 Flange - NPT 654401 655112
42 2
Valve - R/V (Std.) 454405 455129 Flange - Weld 654405 655102
9 1 1
Valve - R/V (Nickel Plated) 454406 455100 42A O-Ring - Flange 2 702004 1 702002
1
10 O-Ring - R/V Cover 1 701919 1 701925 Capscrew - NPT Flange 920384 920547
42B 8
12 Casing 1 014405 015127 Capscrew - Weld Flange 920351 920510
1
Rotor & Shaft Asy. - LGL 71 Disc 2 064412 1 065112
13 1 264443 265149 1
(Includes Ref. Nos. 24A & 24B) 72 O-Ring - Head 2 702022 1 702041
5
Rotor & Shaft Asy. - LGLD, TLGLD 2 2 73 Gage Plug 2 908198 908198
13A 1 264445 265148 2, 6
(Includes Ref. Nos. 24A & 24B) 74 Key – Liner 1 183991 2 185191
1 1
14 Vane - Duravane (Std.) 6 091419 095131 76 Grease Fitting 2 317815 317815
20 Head 2 034416 035128 76A Grease Relief Fitting 2 701992 701992
1
Capscrews - Head (Size 2) 32 920351 N/A 77 Push Rod 3 123905 1 125105
21 1, 3
Capscrews - Head (Size 3) 40 N/A 920369 104 Grease Seal 1 331918 1, 3 331908
1 1 1, 3
24 Ball Bearing 2 903156 903172 123A Dirt Shield 1 701480 N/A
2 2
24A Locknut - Bearing 2 903521 903523 Shaft Protector
1 1 186 1 341601 341801
24B Lockwasher - Bearing 2 903522 903524 (LGLD, TLGLD Models Only)
1 1
26 Gasket - Bearing Cover 2 383940 385125 — Tool - Locknut — 903091 903091
27 Bearing Cover (Inboard) 3 1 041431 041815 — Kit – Maintenance — 898979 898981
27A Bearing Cover (Outboard) 4 1 041433 041817 — Kit – Rebuild — 899079 899081
28 Capscrews - Bearing Cover 8 - 12 920285 920285
1 2
Included in Maintenance Kit and Rebuild Kit Included in Rebuild Kit
3 4
The following applies to double end shaft pump models LGLD2E, TLGLD2E, LGLD3E & TLGLD3E: Use Two Use None
5 6
Double-Ended Rotor & Shaft. Pump models before 1995 require key 184407.
Keep this parts list with Installation, Operation and Maintenance Instructions.
MECHANICAL SEAL – NH3 OR DUAL SERVICE – SNCN (ID Code = QA)
Parts
Ref. Size 2 Size 3
Part Name Per
No. Part No. Part No.
Pump
1
153 Mechanical Seal Assembly 2 334439 1 335225
153A Stationary Seat (Steel) 2 ** **
153B Seal Face (Carbon) 2 ** **
153C Jacket Assembly 2 ** **
153D O-Ring - Stationary (Buna-N) 2 711924 702025
153E O-Ring Rotating (Buna-N) 2 711918 711912
1
Included in Maintenance Kit and Rebuild Kit
** NOTE: Mechanical Seal Ref. No. 153 is only sold as a complete assembly.
Ref. Nos. 153A, 153B & 153C are not available as separate replacement parts.

OPTIONAL HYDRAULIC MOTOR ADAPTER PARTS

Parts Per Size 2 Size 3
Ref. No. Part Name
Pump Part No. Part No.
See Below Hydraulic Motor Adapter Kit * See Below 894425 895140
26A Gasket- Hydraulic Motor Adapter 1 383940 381817
28A Capscrew – Hydraulic Motor Adapter / Head 4/6 920369 920369
Coupling w/ Setscrew – 906967 906967
34 1
1.25” straight key hydraulic motor shaft
35 Key – Coupling 1 909184 909184
76 Grease Fitting 1 317185 317815
76A Grease Relief Fitting 1 701992 701992
135 Hydraulic Motor Adapter – SAE A Flange 1 041827 041831
135A Capscrew – Adapter / Motor 2 920510 920510
* Hydraulic Motor Adapter Kits shipped prior to Spring 2002 were of a two piece design –
refer to page 206-C00.

LGLD2E LGLD3E

1809 Century Avenue, Grand Rapids, Michigan 49503-1530, U.S.A.

Telephone: (616) 241-1611 / Fax: (616) 241-3752 Parts List 501-C01
E-Mail: blackmer@blackmer.com / Internet: www.blackmer.com Page 2 of 2