Date: September 26, 2019
Effective Date: September 18, 2019
CERTIFICATION OF WELDING CONSUMABLE
This is to advise you the Canadian Welding Bureau has witnessed tests on the following :
Company Name: KIM TIN HUNG YEN CORPORATION
Electrode Designation: GM-70S
Point of Manufacture: Hung Yen, Vietnam
Standard: CSA W48-18 (GMAW Carbon Steel)
Classification: B-G 49A 2 C1 S6 (B-G 49A 2 C G6)
Gas or Flux: 100%CO 2 (and with gases allowed in CSA W48)
Size (mm): Min: 0.8 Max: 1.6
Expiry date: September 18, 2021
This certification, may be extended by meeting the check test requirements of the applicable standard
and CWB rules.
CANADIAN WELDING BUREAU
Registrar
TIMTIEGM70S
The product certification system operated by the Canadian Welding Bureau most closely resembles that
described by ISO/IEC Guide 67, Conformity assessment — Fundamentals of product certification, System 5.
LGAI Technological Center, S.A. (APPLUS)
Campus UAB - Ronda de la Font del Carme s/n 08193
Bellaterra (Barcelona)
T +34 93 567 20 00
www.applus.com
CERTIFICATE
No. 0370-CPR-3777
No.
CERTIFICATE OF CONFORMITY OF THE FACTORY
PRODUCTION CONTROL
In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the
Construction Products Regulation or CPR), this certificate applies to the construction product:
WELDING CONSUMABLES. GENERAL PRODUCT STANDARD FOR FILLER METALS AND FLUXES FOR FUSION
WELDING OF METALLIC MATERIALS.
Produced by:
KIM TIN HUNG YEN CORPORATION
D3 STREET, ZONE D, PHO NOI A IZ, LAC HONG, VAN LAM DIST, HUNG YEN PROVINCE, VIETNAM
And produced in the manufacturing plant:
D3 STREET, ZONE D, PHO NOI A IZ, LAC HONG, VAN LAM DIST, HUNG YEN PROVINCE, VIETNAM
This certificate attests that all provisions concerning the assessment and verification of constancy of performance
described in Annex ZA of the standard
EN 13479:2017
under system 2+ are applied and that the factory production control fulfils all the prescribed requirements
set out above.
This certificate was first issued on 12th November 2019 and will remain valid as long as the test methods and/or
factory production control requirements included in the harmonised standard, used to assess the performance of the
declared characteristics, do not change, and the product, and the manufacturing conditions in the plant are not
modified significantly.
Expiration date: 12th November 2020
Bellaterra, 12th November 2019
Xavier Ruiz Peña
Managing Director, Product Conformity B.U.
LGAI TECHNOLOGICAL CENTER, S.A. CIF: A-63207492
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
