RAVENOL TSi SAE 10W-40
Kategorie: Passenger car motor oil
Artikelnummer: 1112110
Viscosity: 10W-40
Specification: ACEA A3/B4, API CF, API SN Plus, API SP
Oil type: Semi-synthetic
Approvals: API SN Plus, API SP, BMW Special Oil, VW 501 01, VW 505
00
Recommendation: MB 229.1, MB 229.3, VW 500 00, VW 502 00
Application: Passenger car
Technology: Clean Synto®
RAVENOL TSi SAE 10W-40 is a semi-synthetic CleanSynto® engine oil
which allows an energy-saving operation because of its additivation, choice
of base oils and viscosity adjustment. In order to guarantee the low
viscosity of the SAE class 10W as well as a low evaporation loss
RAVENOL TSi SAE 10W-40 is produced on the basis of hydro crack oils
1L | 1112110-001 which correspond to the demands.
4L | 1112110-004 Extended oil change intervals according to manufacturer's instructions.
5L | 1112110-005
10L | 1112110-010 Application Note
20L | 1112110-020
20L | 1112110-B20 RAVENOL TSi SAE 10W-40 is suitable for all modern cars with petrol and
diesel engines all the year; no sludge in the motor, excellent results during
60L | 1112110-060 the test run. High engine cleanliness is guaranteed also in case of turbo
60L | 1112110-D60 charging and a complete catalyst operation as well as multi valves and
208L | 1112110-208 diesel direct injections.
208L | 1112110-D28
1000L | 1112110-700 Characteristics
High abrasion resistance
Fuel saving because of easy running characteristics
Excellent detergent and dispersant characteristics
Prevention of black sludge creation
Long endurance because of high oxidation stability
Excellent cold start performance
Very good viscosity temperature behaviour
Low evaporation
Suitable for catalysts
Technical Product Data
PROPERTY UNIT DATA AUDIT
Density at 20 °C kg/m³ 862,0 EN ISO 12185
Colour braun VISUELL
Viscosity at 100 °C mm²/s 14,5 DIN 51562-1
Viscosity at 40 °C mm²/s 97,7 DIN 51562-1
Viscosity Index VI 153 DIN ISO 2909
HTHS Viscosity at 150 °C mPa*s 4,03 ASTM D5481
CCS Viscosity at -25 °C mPa*s 5940 ASTM D5293
Low Temp. Pumping viscosity (MRV) at -30 °C mPa*s 20.800 ASTM D4684
Pourpoint °C -42 DIN ISO 3016
Noack Volatility % wt. 9,5 ASTM D5800
Flashpoint °C 234 DIN EN ISO 2592
tbn mg KOH/g 10,0 ASTM D2896
Sulphated Ash % wt. 1,3 DIN 51575
All indicated data are approximate values and are subject to the
commercial fluctuations.
