Scribd
Upload
31 views2 pages

Safety Gear for High-Risk Work

The document lists various fall protection and safety equipment including harnesses, lanyards, energy absorbers, carabiners and bags. It also discusses procedures for working at height, securing unstable loads, and scaffolding work to prevent falls, falling objects and injuries.

Uploaded by

Maja Zmaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
31 views2 pages

Safety Gear for High-Risk Work

The document lists various fall protection and safety equipment including harnesses, lanyards, energy absorbers, carabiners and bags. It also discusses procedures for working at height, securing unstable loads, and scaffolding work to prevent falls, falling objects and injuries.

Uploaded by

Maja Zmaj
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

OPASAČ I PRATEĆA

OPREMA UZ
OPASAČ
Red. Opasač i prateća oprema za opasač Komada
br.
1. Opasač P-81 za visinske radove 1
2. Opasač P500/P600 1
2. Uže 2 m sa kočnicom za podešavanie dužine PROT. 11 (FP26) 1
3. Šok apsorber energiie ABM+LB 102 Y rope (sa užetom od 1.6 m) 1
4. Kopča aluminijumska/Kuka (AZ024) 2
5. Karabin mali OK PETZL (56-051-01) 4
6. Karabin TREE RUNNER OVAL ALU-EN 362 1
7. Vodootpoma torba 1
Work at height - Falling object - Work at height procedure - Se
injur
- Falling personnel -LSR for work at height
- Ma
- Fall arrest equipment available

- Tools for securing tools available

- Barrier material available

-Dropped object zones

-HSSE verifications - Best practice presentations

Securing control of piping, - Load is unstable - Use correct support equipment - Se


load, equipment with injur
challening COG - Unexpected movement - Supports with sufficient load capacity
- Ma
- Tool Box Talk

- SJA to be performed as applicable for heavy lift operations,


including release of lifting equipment

- Secure load before releasing it from crane/forklift etc and


vice versa if COG is hard to identify

-When transporting loads with fluid take extra precautions


for changing COG and tilt when stopping and accelerating
Scaffolding work; erection, - Falling objects - All scaffold work according to procedure for work at height Seri
modification, dismounting at injur
heights - Falls to lower levels - Ensure all scaffolders are qualified and trained in using fall
arresting equipment and availability of approved equipment.
- Hanging in a safety harness
after a fall - Use necessary barriers/controls to secure drop
zone.Consider rescue equipment or personnel before job
- Unauthorised change of starts (could be people on ground with safety harness on or
scaffold cherry picker)

- Secure loose materials in height.

- Consequence management.

- Special gloves for scaffolding work availiable

- Tool Box Talk and SJA when needed

- Re-check team

-Mandatory Prevent Dropped Object training

-HSSE verifications

You might also like