ago-20
ML 180E28 Euro III MY16 Rigid 4x2
WEIGHTS (kg.) G.V.W. G.C.W. Front axle Rear axle
Design weights (std.) 18000 21500 7100 11500
Design weights (opt.) 18000 32500*/** 7500 12000
* Only with gearbox 9S1110 TO
** only CCP 2342 ( ADR ) P.T.R 28000
KERBWEIGHTS (kg.) cab / wb. MLC 3690* 4185 4590 4815 5175 5670 6210 6570
Front axle 3430 3510 3520 3550 3575 3635 3670 3690
Rear axle 1890 1920 1920 1940 1965 2020 2085 2125
Total 5320 5430 5440 5490 5540 5655 5755 5815
PAYLOAD (kg.) @ G.V.W. 12680 12570 12560 12510 12460 12345 12245 12185
* Not available with long cab ( MLL )
DIMENSIONS (mm)
A Wheelbase 3690 4185 4590 4815 5175 5670 6210 6570
B Overall length (over bumpers) 6279 6954 7696 8124 8754 9361 9901 10801
C Front overhang 1362 1362 1362 1362 1362 1362 1362 1362
D Rear overhang 1133 1313 1650 1853 2123 2235 2235 2775
E Cab width 2390 2390 2390 2390 2390 2390 2390 2390
Overall width ( rear tyres ) 2470 2470 2470 2470 2470 2470 2470 2470
F End of cab MLC 620 620 620 620 620 620 620 620
MLL N/D 985 985 985 985 985 985 985
K Cab height (unladen)* 2845 2842 2842 2841 2840 2838 2837 2836
L Frame height at rear frame end 1081 1081 1084 1085 1085 1084 1081 1083
Frame thickness 6 7,7 7,7 7,7 7,7 7,7 7,7 7,7
Turning circle (Kerb to Kerb ) 13190 14690 15920 16600 17700 19200 20800 21900
Turning circle (wall to wall) 14390 15900 17130 17810 18910 20420 22110 23210
M Front track 1985 1985 1985 1985 1985 1985 1985 1985
N Rear track 1820 1820 1820 1820 1820 1820 1820 1820
P Ground clearance (front) 235 235 235 235 235 235 235 235
Q Ground clearance (rear) 232 232 232 232 232 232 232 232
Low roof Standard
TYRES & WHEELS Tyre code Mission Tyre dimensions
Front Rear
Standard 20498 C 295/80 R 22,5 295/80 R 22,5
Option 20110 B 305/70 R 22,5 305/70 R 22,5
Option 20041 B 315/60 R 22,5 315/60 R 22,5
Option 20229 B 315/70 R 22,5 315/70 R 22,5
Option 20146 B 315/80 R 22,5 315/80 R 22,5
Option 20757 C 12 R 22,5 12 R 22,5
Tyre mission code: B = regional; C = all use; D = mix/off road
NOTE: Weights are to standard specification and include water, oils, tool box, jack. Kerb weights are subject to a manufacturing tolerance of +/- 5%.
ML 180E28 Euro III MY16
ENGINE IVECO TECTOR
Turbocharger Wastegate
Cylinders in line 6
Bore (mm) 102
Stroke (mm) 120
Capacity (litres) 5,88
Max power (HP/kW) 275/202
@ rpm 2500
Max torque (Nm) 930
@ rpm 1250
Engine Brake Power 150 Kw @ 3200 rpm
Governor All speeds
Cooling fan Viscostatic
Fuel system Common rail - Bosch
Speed limiter 90kmh
GEARBOXES MEC. 9 SPEED MEC. 6 SPEED ALLISON
Ratios ZF 9S1110 TO ZF 6S1000 TO S 3000 ELECTRICS
1st 9,48 6,75 3,49 Tension 24v negative earth return
2nd 6,58 3,60 1,86 Alternator 28v, 70A
3rd 4,68 2,12 1,41 Starter 24v, 4 kW
4th 3,48 1,39 1,00 Batteries 2 x 12v, 120Ah
5th 2,62 1,00 0,75 Circuits protected By fuse
6th 1,89 0,78 System Multiplex - CAN line data bus
7th 1,35
8th 1,00 SUSPENSIONS
9th 0,75 Front Parabolic
Rev 8,97 6,06 5,03 Rear Parabolic
Anti roll bar Front & rear
Shock absorbers 2 on front, 2 on rear
PERFORMANCE (with standard tyres)
Type: ZF 9S1110 TO STEERING
Axle ratios available 4,63 4,11 5,29 6,17 Type Power assisted
Geared speed (km/h) N/D N/D N/D N/D
Gradeability % @ 18 t G.V.W. N/D N/D N/D N/D AXLES
Front Iveco 5871/5. Rigid.
Type: ZF 6S 1000 TO 4,63 4,11 5,29 6,17 Rear MS 13-17X. Single reduction.
Axle ratios available N/D N/D N/D N/D
Geared speed (km/h) N/D N/D N/D N/D
Gradeability % @ 18 t G.V.W. FUEL TANK
Type and capacity 200lt. with lockable fuel cap.
Type: ALL. S 3000 CAB INTERIOR
Axle ratios available 5,29 4,11 6,17 Day cab
Geared speed (km/h) N/D N/D N/D Day cab ( MLC )
Gradeability % @ 18 t G.V.W. N/D N/D N/D Forward control cab. Fabric air suspended driver seat with safety belt and standard
headrest. Fabric dual bench fixed passenger seat with safety belt and standard
headrest.Windowless rear wall with document net. Four speed fan. All gauges
CLUTCH monitored using international symbols. Fully adjustable steering column. Column
Type Single plate, diaphragm spring, pull type. mounted on control stalks. Roof hatch. Electric windows. Standard cab heating.
Diameter (mm) 15,5" (395 mm) Tinted windscreen. Speedometer KHM-MPH. Standard toolkit. Radio provision.
Asbestos free. Smoking kit. 24/12 V converter. Driver door sunblind. Arabic high line cluster.
Jacking equipment.
Sleeper cab ( MLL )
BRAKES As per day cab plus: 1 lower bunk with net protection. Storage box under bunk.
Type 2 independent pneumatic circuits Reading light and bed module for controlling cab lights, electric windows, roof hatch.
Service A.B.S. + E.B.L. Fabric single passenger seat with seat belt and standard headrest.
Front axle and rear Discs. 432 x 45 mm diameter
Friction area front 408 cm2 CAB EXTERIOR
Parking Mechanical with spring cylinder, rear. MLC and MLL cab
Emergency Combined with parking brake. Pressed steel construction with SMC for vulnerable parts. Suspension: helical
Air reservoirs 2 x 20 litres, steel springs and dampers. Hydraulic manual tilt to 60 degrees. Manual rear view mirrors
Engine brake Standard exahust brake according to CEE 88/321. Mirrors arm 2600mm. Sunvisor film. Snorkel air intake.
Air compressor 360 cc - single cylinder
Air dryer Air Processing Unit CHASSIS
Ladder construction. Pressed steel side members and riveted and bolted cross
members (C section). Height x width 276x80
NOTE: The information in this literature is intended to be of a general nature only. Iveco reserves the right to modify or change specification at any time.
