HI - STREET (AD) & HI - ROAD (AT)

AD AT260S31Y/PS

Plated/Design Weights (kg) GVW GTW Front Axle Drive Axle Tag Axle
Plated weights 26000 29500 8000 11500 7500
Design weights 26000 44000 8000 13000 8000

Kerb Weights (kg)

Weights are to standard specification and include water, oils, 5 litres of AdBlue and 20 litres of fuel but excludes driver.
Kerb weights are subject to a manufacturing tolerance of +/-5%. AT Sleeper cab adds 110kg. AS 1930 TD gearbox adds 20kg

Options. 632 Exterior sun visor adds 7kg. 630 AD cab Adjustable spoiler adds a further 609mm- 899mm and 42kg. 630 AT cab Adjustable spoiler adds 666mm / 971mm
height and 50kg. 14567 High roof adds 625mm height and 120kg. 795 High roof spoiler adds 22mm / 231mm height and 14kg.
Aluminum air reservoirs reduce kerb weight by -35kg. Alloy wheels reduce kerb weight by -158.4kg 8 x (22.5 x 9.00) wheels.
**32500kg GTW only available with AS 1930 TD gearbox and drawbar pack

Wheelbase 3800 4200 4500 4800 5100 5700 6050

Front 4350 4365 4360 4390 4410 4445 4455
Rear 3040 3125 3150 3140 3130 3265 3335
Total 7390 7490 7510 7530 7540 7710 7790
Maximum Body/ Payload (kg) 18610 18510 18490 18470 18460 18290 18210
**Trailer/ Payload 32500 (kg) 25110 25010 24990 24970 24960 24790 24710

Dimensions (mm)
A Wheelbase 3800 4200 4500 4800 5100 5700 6050
A1 Rear bogie spread 1395 1395 1395 1395 1395 1395 1395
B Overall length (over bumpers) 8502 9262 9518 9818 9847 11077 11652
C Front overhang 1410 1410 1410 1410 1410 1410 1410
D Rear overhang 1757 2117 2073 2073 1802 2432 2657
E Cab width (over front bumper) 2550 2550 2550 2550 2550 2550 2550
F C/line f/axle to back of cab equip Day 415 415 415 415 415 415 415
Sleeper N/A 855 855 855 855 855 855
G Back of cab to end of frame Day 6537 7297 7553 7853 7882 9112 9687
Sleeper N/A 6857 7113 7413 7442 8672 9247
H Cab gap Day 305 305 305 305 305 305 305
Sleeper N/A 120 120 120 120 120 120
K Cab height (unladen) 2965 2965 2965 2965 2965 2965 2965
L Frame height (unladen r.o.f.) 1022 1022 1019 1017 1012 1014 1017
Rear frame width (r.o.f) 769.4 769.4 769.4 769.4 769.4 771.4 771.4
Frame depth before drive axle 302.4 302.4 302.4 302.4 302.4 304.4 304.4
Frame depth after drive axle 212.4 212.4 212.4 212.4 212.4 304.4 304.4
Frame C section width 80 80 80 80 80 80 80
Frame thickness 6.7 6.7 6.7 6.7 6.7 7.7 7.7
Front ground clearance (bumper) Minimum 230 230 230 230 230 230 230
Rear ground clearance (drive axle) Minimum 227 227 227 227 227 227 227
Turning circle (wall to wall) 16080 17080 17730 18530 19330 20730 22030

Tyres and Wheels Tyre Size Tread Wheels

Front Rear Front Rear Front Rear
Standard 315/80R22.5 315/80R22.5 On Road Traction 22.5x9.00 22.5x9.00
Optional 385/65R22.5 315/80R22.5 On Road Traction 22.5x11.75 22.5x9.00
Optional 385/65R22.5 315/80R22.5 On Road Traction 22.5x11.75 22.5x9.00
Optional 385/55R22.5 315/70R22.5 On Road Traction 22.5x11.75 22.5x8.25
Optional 315/70R22.5 315/70R22.5 On Road Traction 22.5x9.00 22.5x9.00
Optional 315/70R22.5 315/70R22.5 On Road Traction 22.5x9.00 22.5x9.00
Optional 295/80R22.5 295/80R22.5 On Road Traction 22.5x8.25 22.5x8.25
Optional 305/70R22.5 305/70R22.5 On Road Traction 22.5x8.25 22.5x8.25
Optional 315/60R22.5 315/60R22.5 On Road Traction 22.5x9.00 22.5x9.00
Optional 295/60R22.5 295/60R22.5 On Road Traction 22.5x9.00 22.5x9.00

The information in this literature is intended to be of a general nature only. Iveco Ltd reserves the right to modify or change specification at any time. For further information please consult your dealer. PD/AP/AD AT260S31Y/PS03/10/2013
 AD AT260S31Y/PS 6x2 Rigid

Engine Cursor 9 Axles

Standard: 4 stroke intercooled turbodiesel including Front Iveco 5876 I-beam with oil filled hubs, off set 197.5mm
over head camshaft, 4 valves per cylinder, Drive Meritor MS13-175X Hypoid
common rail fuel injection with a fixed geometry turbo. Diff Lock Standard
Cylinders 6 in line Standard Ratio AS 1420 TD - AS 1930TD gearboxes 3.70:1
Bore (mm) 117 Tag Iveco 57080
Stroke (mm) 135 Type Lifting steering axle
Capacity (litres) 8.7 Wheels and tyres Single
Power (PS/kW) 310/228
@ rpm 1675-2400 Chassis
Torque (Nm/lbft) 1300/958 Type Ladder construction with rolled steel side members and
@ rpm 1200-1675 riveted and bolted cross members. C -section chassis rails
Green Zone @ rpm 1100 -1700 Dimensions : 302.4 / 212.4 x 80 x 6.7mm < 5100mm,
Rating Euro VI 302.4 x 80 x 7.7mm > 5700mm. Trailer electrical connections.
Cooling Fan 3 speed electro- magnetic Chassis colour : Black Grey (IC 444), RAL 7021 (70-80 Gloss)
Fuel System Unit Injector System
Fuel filter Heated head Fuel Tank
Air filter Dry with cab mounted intake Type 300 litres, aluminium
Turbocharger Waste gated Locking fuel cap
Compressor 630cc
Exhaust Stainless steel Hi-eSCR system Adblue Tank
Iveco turbo brake 390PS / 286kW Type 55 litres, plastic, heated, locking cap
@ rpm 3000
Speed Limiter Standard 90 Kilometer/hr @ 1536 rpm Suspension
Engine Immobiliser Standard Drive axle Pneumatic ECAS (remote control in the cab)
Type 4 pneumatic air bags ( 13,000 kg )
Clutch Raise/lower (+100/-80 mm) height chassis
Type: Single plate, diaphragm spring, pull type. Tag axle 2 pneumatic air bags on tag axle (8,000 kg)
Asbestos free Raise/lower < 5700mm wheel base (+150 / -146),
Diameter / Friction area 406 mm / 854 cm2 > 5700mm wheel base (+110 / -156),
Lift 1 pneumatic air bag (+200mm)
Gearbox EuroTronic 12 AS 1420 TD AS 1930 TD
12 -speed fully automated with semi - automated function Electronics
Gear ratio's Type 24v negative earth return
1st 12.83 15.86 Alternator 28v, 90A
2nd 10.37 12.33 Starter 24v, 5kW
3rd 8.03 9.57 Battery 2 x 12v, 220Ah
4th 6.49 7.44 Isolation switch Electronic controlled
5th 5.18 5.87 All circuits protected by fuses
6th 4.18 4.57 Multiplex 4 CAN line data bus
7th 3.07 3.47
8th 2.48 2.70 Brakes
9th 1.92 2.10 Type Electronic braking limitation (EBL)
10th 1.55 1.63 Front 436mm ventilated disc
11th 1.24 1.29 Rear 436mm ventilated disc
12th 1.00 1.00 Park Actuates spring brake chambers on
Front axle and drive axle
Rev 1 13.07 14.68 Iveco turbo brake (de-compression engine brake)
Rev 2 10.56 11.41 Heated air drier Standard
Air reservoirs Steel
Performance ABS Standard
- with Eurotronic AS 1420 TD - AS1930 TD gearboxes ASR Traction Control Optional
and standard tyres
Axle ratios available 3.36 3.70 4.11 4.63 Steering
Geared speed (mph) 87 79 71 63 Type ZF 8098 power assisted
Gradeability % @ GVW 40+ 40+ 40+ 40+ Ratio 22.2:1 - 26.2:1
Gradeability % @ GTW 40+ 40+ 40+ 40+

Cab Equipment
Active Day Cab interior incorporating:
Heated air suspended 9 -way adjustable driver's seat, trimmed in fabric with a microfibre centre section, incorporating pneumatically adjustable lumbar support, and inertia reel belt, seatbelt warning. Soft feel
dashboard and multi-functional steering wheel incorporating touch button menu controls for the real time digital display. Dual scale speedometer. All gauge functions monitored using international symbols.
Pneumatically adjustable steering column steering column, 2 column mounted control stalks, left stalk operating the indicators, main beam, windscreen wash wipe, right stalk operating Eurotronic gear change,
engine brake, cruise control and variable speed limiter. Adjacent of the is the instrument panel is the dash mounted Eurotronic gearbox controls for automatic and semi-automatic, neutral, reverse and low
speed manoeuvring modes (forward and reverse). Heater with 4-speed fan for airflow up to 600m3/hr. Park brake with door open, brake off audible alarm. 12v socket right and left hand cup holders, central
document tray, 24v socket. Passenger side diagnostic panel mounted underneath the glove box containing the following; 30 pole diagnostic plug, OBD plug, Air supply, and ECO mode key switch (optional).
Three section over head console, netted passenger and central storage sections, driver section containing four DIN sockets one with the automatic electronic2-man tachograph. Remote control Radio/CD
with prepositioned speakers and roof aerial. FMS connections. Courtesy and map reading lights. Left and right hand entry assist handles. Two interior downward facing corner spot lamps and door puddle
lamps illuminating cab access. Rear bulkhead storage and writing pad.
Active Time Cab interior:
Equipment as for day cab, also includes Eberspacher programmable cab heater. Three piece lower bunk (trimmed in microfibre material) with under bunk storage and control panel, incorporating menu controls
for the following functions; powered widows, roof vent, interior lights, cab heater and alarm clock. 12V socket. Curtains to enclose entire cab area
Active Time High Roof interior:
Optional high roof incorporates equipment as for sleeper. Plus three upper lockers. Additional side storage. 1.8m interior height. Electric operated smoked glass roof vent with mosquito net.

Active Day Cab exterior incorporating:

Forward control day cab Galvanised pressed steel construction with IMP for vulnerable parts (complies to "ECE" R29 crash test). Helical sprung suspension and dampers. Hydraulic cab tilt to 60 deg.
LED upper marker lights. Tinted electric door windows and tinted laminated screen. Heated rear-view mirrors, plus kerb, wide-angle mirrors and front view mirror. Black (IC575) bumper, steps and mud guards.
Active Time Cab exterior:
Construction and equipment as for day cab, also includes left and right hand external stowage compartments, electronically released from inside the cab.
The information in this literature is intended to be of a general nature only. Iveco Ltd reserves the right to modify or change specification at any time. For further information please consult your dealer. PD/AP/AD AT260S31Y/PS03/10/2013
Active Time High Roof exterior:
Optional aerodynamic shaped high roof, in cab colour with glass roof vent, roof constructed of IMP (Injection Moulded Plastic)

The information in this literature is intended to be of a general nature only. Iveco Ltd reserves the right to modify or change specification at any time. For further information please consult your dealer. PD/AP/AD AT260S31Y/PS03/10/2013