OTraeview

True Security Systems

SMART Wi-Fi Camera

with Battery Backup
Model T18058

et

USER MANUAL
www.trueview.co.in
PACKING LIST

FO M
SM
3M

Battery camera x1 Base x1 Wall-mounted 3M Glue x1

iron sheet x1

ng
UU
Qch Marn ue

Charging cable x1 User Manual x1 Certficate x1 Screw package x1

INTERFACE DESCRIPTION
Indicator light
MIC

Photosensitive USB charging port

Lens 8 SD card interface
Human Infrared
Sensor (PIR) 9 9Button

Speaker
Base
LEDIndications:
Green &Red LED always on: The camera is being
previewed remotely
Green LED always on: The device is turned on or is woken
up
Green LED flashes continuously: Upgrading
Green LED flashes continuously and slowly:
Red LED flashes 3 times quickly: Power off
Charging
Red LED flashes continuously fast:
Matching code
Red LED flashes continuously slowly: Connecting to the internet
Red LED is always on: Low battery
. The
traffic LED is always off: In standby
Button Operation:
Press and hold 2s in the off state: Power on (sgreen LED for 1s)
Press continuously for 3 time: Power off (red LED flashes 3 times)
Press and hold for 8s: Reset to enter the pairing state (red LED flashes)

CONNECTING MODES
The battery camera supports 3 connecting modes:
1. Remote view by connecting the router

Internet

- I Home Router

Mobile Device
2. Direct connection through mobile phone

.----
Mobile Device

3. Pair to wireless NVR (WiFi/4G Base station, WNVR, Tablet)

.-- WNVR

Internet
Mobile Device Home Router
While viewing remotely by connecting the router, the camera Wi-Fi should
be connected to the router. The video is stored on the SD card of the
camera or on the Cloud. When using in the local direct connecting mode,
the Wifi of your mobile phone should be connected fo the camera and the
video can only be stored on the SD card of the camer. When working by
pairing to the wireless NVR, the video is stored on the NVR and you can
use moble phone remotely to view and setup the camera through the
wireless NVR.

SETUP AND INSTALLATION

A Boot up
While viewing remotely by connecting to the router and direct connection
method, please boot the device after inserting the 5D card. When using by
pairing to the wireless NVR, please make sure the memory (SD card, HOD
etc.) of the wireless NVR is ready.

Please press the button for 2s to turn on the battery camera. If the camera
cannot be turned on, please plug in the charging power cord and the
Camera will turn on automatically,

J
B] App installation
User can search "Truecloud" on APP store or Google Play, or scan the QR
code on the packaging box.
ote: For i0S system, i0s 90 version or above is required. Similarly for
Ardroid, version 5.0 or above is needed

08R0

Andaiá APP
O
Phone
 Log in

XV
+91 12345 67890

C] Account login X

Account login: On the login Register

Forget password?
interface, enter the account/phone
number/email, and the Confirm
corresponding password, and click
"OK" button to log in. Remember Password

Localexperlence

D Add Camera to APP

Method 1: Scan the QR code on the camera when the smart camera is
configured by connecting to the network and local direct way.
1. keep your mobile phone and
the camera near the router, and
the distance should be 30 30-100cm
100cm.

2. After the smart camera is powered on, you will hear

a voice prompt "Start Configuration Mode" and the
red LED stats flashing. (Otherwise press the RESET
button on the camera for 8 seconds, it will be reset to
factory default after the voice prompt "restore factory
setting. The camera will restart automatically")
3.Open the APP and click on the 4. Scan the QR code on the device
"+" in the upper right corner to
enter the scan code interface

6:00 PM
600 PM &71%

Device Group

Add Smart Devic

A po On, scan e QR code on the

duvioe or eplayed on he mon.r.

QthaL ways 1o add

M
 not flashing,
6. If the device indicator is
5. On the search device page, reset the device and wait for
the device
click "Add to the next step
indicator to flash & proceed

Reset device
Seareh device
Resef devlee

Checkhe devke indcatorin lashng, you

lo reel he
he Resst bulhn
an presa and hold
dev

D 180864123

ihe pice in anly for reerence, pleane

Ackd Device light is blinking9

7. To view & use with Wi-Fi or other networks, please select Remote View. If there
is no network, you can connect to the camera with Direct Connection method
with both the device in close vicinity.
400P

Select add mode

note Vicw
Mew Mdeo via W H ahr newov, plea
a c t Renale Vew (moal paople dhoon)

Direet Cereuton
VWew Mdeo whet rebwork seed Diect
Cewuveen (lew pede cduooe)

Remue Vew
Adding camera with remote view option
1. Click "Remote View". Choose the 2. Use the camera to scan the QR code on
Wi-Fi device that needs to be mobile phone as shown in the figure.
connected with. Enter the password Proceed to the next step after hearing the
and proceed to the next step. prompt tone or checking the LED status.
e 06 P

Connecting Wi-Fi Operation guide

Connect device to work WiF Operation steps of QR code scanning

Pease seleca 24G WFi network for the 1. Please keap the QR code Facing the len of
device. This device does not support 5G WHFI
the device ata distance of about 15-25cm,
network at this time
please do not scan the code in backlight

environment

AndroidAPFA36 Ater the device hes succeesuly scanned the

code, t wi sound a prompt voice or the
indicator light wll stop fashing
Pesswordd

15-25cm

Next Next

800PM
Device scan OR code

A
3.After the network configuration is successful,
set the name and password for
the device to add it successfully.

Dece conrecled Netnorkng contiguraton succoded

Corveg

1. Rov l phana, c a s are d e es

2. The cneecion proce A 12 m i r s

Network configuration succeeded

Set dovice neme

Device

Living roomj| BedoomShdy room

Ofice The store

78 %
Corned he device toa-A
r dud oerice for the deios
Dwas initzian
Add devce to ist

2HCR the
4
payback or cioud icon to
Tap the share view the video which is on the device or
icon to share tihe camera to others.
Ch
Adding camera with local direct connection
1. Click "local direct connection". Set a password for the Wi-Fi of the device
itself and proceed to the next step.
2. Use the camera to scan the QR code on mobile phone as shown in the
figure. Proceed to the next step after hearing the prompt tone or checking
the LED status.

Set Wi-Fi password Operaton guide

Set the devkce W-Fi paeaword Operation stepe of CR code scannin

1. Pleene eep the OR code Facing
n o t the peeaword or he device's on
Ww-Fi A succseatul addition you need to
ens of
oonnect to he deios'a W-Fi to welch he
he device a dtance of abot 152cm
Wdco norm.y plee do not scan the code in bedig
envwonne

PCS4861817834161 A he device hes uccly scenned h

code, i w sound a promot vic or he
indiclor ght w slop fashing
Set peeword (not lees hen 8 bite)

youforget he device Fipenword,

pleene resd he devc und dd again

-15-25cm

Ne Net

Device scan QR code

D 10

he OR coda wn the device ien

volce ar the ndlcatar op

 its 4. Set the name and
3. After connecting with password for the device.
own

Wi-Fi, return to APP Then you can add it to the device list.

Connect device Wi-Fi Atded sucLesstuly

Plense reed e stepe careuly

Open ael phone Settngs and select

Wtes LAN

wWAN Device added successhuly

set devce name
Select IPCoor and enter the pesSword Device

KUANE8311-3708
Living roomBedroomShady room
LOMce The store
Ater connecing, well for the W-Fi icon to e t device paseword
ppeer in he status ber and etum to the APP
Input device password
Device password can be emply

Go to settings Add devsce to s

Method 2: To use with wireless NVR, power on the wireless NVR

and connect it to
the Internet. Add the wireless NVR
by scanning the ID QR code on the body
of
NVR or displayed on the screen with the APP. Now
you can check the smart
camera on the APP.
1. When the WNVR is powered on, 2. Open the APP and click on the "+" on
connect the WLAN network to the
the upper right corner to enter the scan
router which is already connected to the
code page.
internet.

Device Group
QSeeh for device (neme or 0)

Corfin that the uevce irtarcator is on

ard scan n e aR coce or e cevoce

bocyor cisplay
3. Scan the ID QR code on the wireless NVR
body or the screen, and add
the device according to the
setting shown in the APP. The camera paired to
the wireless NVR will be
directly displayed in the device list.
Notification, Preview and Playback
1. Click the push information or
"info" button to view the alarm information of the camera.
2. Cick the
corresponding play icon on the device list to enter the preview page to view
time vide0 and have voice intercom. real
Devce Grou My device

Reco.cn

Device Remote
viewing
My device

Voice
Intercom
3. Click the playback or cloud icon to view the video which is on the
device or cloud.
4. Tap the share icon to share the camera to
others.

Aiarm foetsage
My dnce
My deraa
Nowndeys v Te ranga A bypes

412 18

14121

Lo y pu 14 921

Ckad m i n n g T cawd reaodirg

14 12:16

14 12.16
heneDAM1S Ras

unuO2
131 0 14d0
Sorceho Reord

Alarm information Cloud storage playback Video playback

Installation and placement

1. Place on a desk or table,

as shown

2. Fix the smart camera on the wall or

glass. Fix the wall-mounted iron sheet to
the wall with 3M adhesive tape (smooth
surface such as glass) or screw it on the
walf. Align and fix the magnetic base of
the smart camera to the iron sheet,
and adjust the angle.
Charging instructions
While in use, if the APPpushes low battery message or the camera hassa
low battery warning
indicator, you need to charge the camera as shown in
the figure.

1.Connect the USB power supply to 2. During charging, the green LED is
the smart camera.
always on. It turns off after charging is
completed.

Camera pairing to wireless NVR

In order to pair the smart camera with the wireless NVR, code
required. matching is
1. Place the smart camera and the
wireless NVR within 30- 100 cm.

30-100cm

2.While the smart camera is turned

on, 3. When the indicator LED of smart
press and hold the RESET button for 6
camera turns red & starts flashing
seconds.
rapidly, the code matching mode is
activated.
WNVR
Right-click the mouse and select "Wireless Add" to check whether it is
added to the device. If yes, click exit otherwise repeat steps 2 and 3 above.

Troubleshooting
Trouble Solution
Make sure your phone, camera, and router are close
Unsuccessful
unsuceess Note that the camera cannot
enough.
1 network support connection to a 5G router.
confguration Check that the router name and password are correct.
Check the Internet settings of the wireless
NVR.
Check your router's Intemet connection.
Check the connection between the camera and
the router. If you change
router or change the WiFi password, you need to reset the camera and the
reconfigure the network parameters.
2
Device is Check the connection between the wireless
NVR and the router & the
offline connection between the camera and the
wireless NVR. If you change the
router or change the Wi-Fi password, you may need to reconfigure the
WNVR's network.
Check if the camera battery is
exhausted, you can plug in the power 8
try again.
3 No preview The server traffic may be
high, try restarting the app.
Make sure the app has notification
No push alarm message
permissions. Please confirm that the
push switch is turned on in the App Personal Center
notfication settings. Please confirm that the alarm
in the camera message push switch is turned on
settings.
For direct connection to the
router, please insert SD card before booting.
Make sure the camera PIR
{monitoring) switch is turned on.
s|
5| Ho
Morecordingease
recording make sure the camera
recording switch is turned on.
Please check the
recording settings on the wireless NVR.
Please check whether the S0 card
status is normal in the App. If it is
abnormal, try to format the 5D card.