Calibration Services = Electro-Technical = Thermal 17025 = Mechanical Flow instruments TcL2aMoss4 Tt Includes A Kay Benefits CERTIFICATE OF CALIBRATION (Certificate No = AS/23-24/12.70 Page No. 1012 Date of Calibration 08.11.2023 Next Calibration Due On :- 07.11.2024 [AIRECARE SYSTEM & SOLUTION INDIA PVT LTD. ‘Service Request No. AS/23-24/12 |Sr.No.306,Gat no.1415,Shree Nivas,Bhaweshwari Soc. Condition of UUC Working. |Morewasti Chikhali Pune-411062 Location of calibration: On site. I. Enviromental Conditions [Ambient Temp. = 2510. 35°C Relative Humidity 45 to 75.% Rh i. Description of UUC Name = Battery Screw Machine Range = 0 to 1500 Rpm Make = DeWalt (000776) Resolution : ID No. :— Location :— Sr.No. + 001340 [Type = Analog Ii. Reference Standards used for calibration Name «= Digital Tacho Meter LD No. = ASDTMO1 Isr.No. 12400220 [Certificate No + ACS/059/CM 27/230001 [Calibration Validity __- 24.09.2024 Iv.Calibration Results (RPM) ‘Sr No. UUC Reading (RPM) Standard Reading (RPM) Error (RPM) i 1500 1502 20 Nowe lt) UUC stands for Unit Under Calibration. 2) This certificate refers only o the particular item submitted for calibration 2) This certificate shall not be reproduced, except in fll unless written permission for the publication of ‘an approved abstract has been obtained from the Technical Manager of AS CALIBRATION SERVICES, Pune. 4) The calibration results reported in the certificate are valid at the time of and under the stated conditions , Jor measurement. [Calibrated By Mr. Akshay A, AY ' M ‘Approved By ‘mol D Survase é Technical Manager Calibration Engineer TEND OF CERTFICATE™ AS CALIBRATION SERVICES Reg. Office - 45912602, Sant Tukaram Nagar, Pinot, Pune -411 018. 1 conlact@ascalbration com ©) +91 9765272767 / +91 7263090609 | ae " EEE» Calibration Services 1 Electro-Technical ISO = Thermal 17025, Mechanical = Flow Instruments ToL22Mose4 CERTIFICATE OF CALIBRATION [Cerificate No + AS/23-24/12.71 Page No. 10f4 Date of Calibration = 08.11.2023 Next Calibration Due On_:- 07.11.2024 [AIRECARE SYSTEM & SOLUTION INDIA PVT LTD. Service Request No. = AS/23-24/12 |Sr.No.306,Gat no.1415,Shree Nivas,Bhaweshwari Soc. Condition of UC = Working IMorewasti Chikhali Pune-411062 Location of calibration _:- On Site. I. Enviromental Conditions [Ambient Temp. 2510 35°C Relative Humidity - 45 10 75% Rh i. Description of UUC Name © Battery Screw Machine Range = Oto 1500 Rem Make Dewalt Resolution : ID No. — Location — Sr.No. 001347 Hype = Analog Il, Reference Standards used for calibration Name Digital Tacho Meter .D No. > AS-DTMO1 ISr.No. 12100220 [Certificate No = ACS/059/CM 27/230001 [Calibration Validity 24.09.2024 iv Calibration Results (RPM) SrNo. WUC Reading (RPM) | Standard Reading (RPM) Error (RPM) 1 1800 1501 10 Note 11) UC stands for Unit Under Calibration. 2) This certificate refers only to the particular item submitted for calibration 3) This certificate shall not be reproduced, except in full unless written permission for the publication of ‘an approved abstract has been obtained from the Technical Manager of AS CALIBRATION SERVICES,Pune. 4) The calibration results reported in the certificate are valid at the time of and under the stated conditions , lof measurement. calibrated By } Approved By Mr. Akshay A Aneray Mr. Amol D Survase (Calibration Engineer Technical Manager END OF CERTIFCATE® AS CALIBRATION SERVICES Q, Reg Office = 469/2652, Sant Tukaram Nagar, Pimps, Pun 411018, ™ contact@ascaltraion com © +91 9765272767 / +91 7263090809Calibration Services 1 Electro-Technical = Thermal = Mechanical = Flow Instruments cy ISO 17025, TeL22mose4 7 It Includes A Key Benefits CERTIFICATE OF CALIBRATION & Reg Office + 48072632, Sant TUkaram Nagar, Pmpr, Pune 411 018. ™ contact@ascaltraton com ©) +91 9768272767 / +91 7263080808 AS CALIBRATION SERVICES [Certiicate No + AS/23-24/12.72 Page No, + 10fd Date of Calibration 08.11.2023 Next Calibration Due On_:- 07.11.2024 [AIREGARE SYSTEM & SOLUTION INDIA PVT LTD. ‘Service Request No. 18/23-24/12 sr.No.306,Gat no.1.415,Shree Nivas,Bhaweshwari Soc. Condition of UC = Working IMorewasti Chikhali Pune-411062 Location of calibration = On Site. i. Enviromental Conditions [Ambient Temp. + 251035 °C Relative Humidity - 45 to 75 % Rh I. Description of UUG Name * Baitery Screw Machine Range F 010 1500 Rom Make Dewalt Resolution ID No. nee Location — Sr.No. 001335 Hype Analog i. Reference Standards used for calibration Name ~ Digital Tacho Meter 1.0 No. - AS-DTM-O1 Isr.No. - 2100220 Jcentticate No = ACS/059/CM 27/230001 [Calibration Validity 24.09.2024 IV.Calibration Results (RPM) Si No UUC Reading (RPM) | _ Standard Reading (RPM) Error (RPM) 1 1500 1498 20 Rote 1) UUC stands for Unit Under Calibration. 2) This certificate refers only tothe particular item submitted for calibration [s) This cericate snal not be reproduced, except in full unless writen permission forthe publication of an approved abstract has been obtained from the Technical Manager of AS CALIBRATION SERVICES Pune. i 4) The calibration resutts reported inthe ceriticate are valid at the time of and under the stated conditions, i Jot measurement. 4 / \ ; calibrated By al Approved By il IMr. Akshay A Aneray F ‘Mr. Athol D Survase i calibration Engineer a Technical Manager, TEND OF CERTIGATE™“> Calibration Services 1 Electro-Technical ISO = Thermal 17025, = Mechanical = Flow Instruments TcL/22Mo6e4 CERTIFICATE OF CALIBRATION [Certificate No © AS/23-24/12.73 Page No. Pa Ofd Date of Calibration = 08.11.2023 Next Calibration Due On_:- 07.11.2024 /AIRECARE SYSTEM & SOLUTION INDIA PVT LTD. Service Request No. AS/23-24/12 |Sr.No.306,Gat no.1415,Shree Nivas,Bhaweshwari Soc. Condition of UUC = Working IMorewasti Chikhali Pune-411062 Location of calibration On Site I. Enviromental Conditions [Ambient Temp. = 2510 35°C Relative Humidity 4510 75% Rh, Il. Description of UUC. Name © Battery Screw Machine Range ‘Oto 1500 Rpm Make Mogora Resolution - 1D No. —_ Location =p ISr.No. 001345 Type Analog, il. Reference Standards used for calibration Name Digital Tacho Meter 1.0 No. » ASDTIMO1 Sr.No. 12100220 (Certificate No ACS/059/CM 27/230001 Calibration Validity 24.09.2024 IV Calibration Results (RPM) Sr No. WUC Reading (RPM) [Standard Reading (RPM) Error (RPM) 1 1500 1503 3.0 Nate }1) UC stands for Unit Under Calibration. 2) This certificate refers only to the particular item submitted for calibration |3) This certificate shall not be reproduced, except in full unless written permission for the publication of ‘an approved abstract has been obtained from the Technical Manager of AS CALIBRATION SERVICES, Pune. i 4) The calibration results reported in the certificate are valid at the time of and under the stated conditions, Jof measurement. i calibrated 8 Approved By . ‘ cK. Mr. Akshay A Aheray Mr. Amol D Survase WW Calibration Engineer Technical Manager TEND OF CERTIFICATE AS CALIBRATION SERVICES Tukaram Nagar, Pimpri, Pune -411 018. M1 contact@ascalibraion.com ©) +91 9765272767 / +91 7269080908 Reo. Ofice 46972092, 5Calibration Services 1 Electro-Technical ISO * Thermal 17025, "Mechanical ‘= Flow Instruments Tcv/22M0684 BS It Includes A Key Benefits CERTIFICATE OF CALIBRATION [Certificate No AS/23-24/12.74 Page No. riOfd Date of Calibration 08.11.2023 Next Calibration Due On_ 07.11.2024 JAIRECARE SYSTEM & SOLUTION INDIA PVT LTD. Service Request No. AS/23-24/12 |Sr.No.306,Gat no.1415,Shree Nivas,8haweshwari Soc. Condition of UUC ~ Working Morewasti Chikhali Pune-41.1062 Location of calibration _ = On Site. | Enviromental Conditions lAmbient Temp. 2510 35°C Relative Humidity 45 to 75.% Rh I Description of UUC. Name ~ Battery Cutter Machine Range = 010 9000 Rpm Make DeWalt Resolution ~ ID No. _ Location z— Sr.No. - 126556 Hype = Analog i. Reference Standards used for calibration Name ~ Digital Tacho Meter LD No. AS.OTM.01 Sr.No. = 12100220 [Centficate No ACS/059/CM 27/230001 [Calibration Valiity 24.09.2024 IV Calibration Results (RPM) ‘Sr No. UUG Reading (RPM) | _ Standard Reading (RPM) Error (RPM) 1 ‘9000 9005, 5.0 Nate [1) UUC stands for Unit Under Calibration. 2) This certificate refers only to the particular item submitted for calibration [3) This certificate shall not be reproduced, except in full unless written permission for the publication of ‘an approved abstract has been obtained from the Technical Manager of AS CALIBRATION SERVICES, Pune. |4) The calibration results reported in the cerficate are valid at the time of and under the stated conditions , lof measurement. Calibrated By Approved By © Mr. Akshay A Aneray Mr. Amol D Survase Calibration Engineer Technical Manager TEND OF CERTIFICATE AS CALIBRATION SERVICES Nagar, Pimpn, Pune - 411 018. M contact@uscalibraton com (©) +31 9765272767 /+91 726090008we Calibration Services My '" Electro-Technical Thermal 17025, Mechanical 1 Flow Instruments TeLizaMo6ss Tt Includes A Key Benefits CERTIFICATE OF CALIBRATION ‘Certificate No + AS/23-24/12.75 Page No. + 10f1 |Date of Calibration = 08.11.2023 Next Calibration Due On_:- 07.11.2024 | AIRECARE SYSTEM & SOLUTION INDIA PVT LTD. Service Request No. AS/23-24/12 |Sr.No.306,Gat no.1415,Shree Nivas,Bhaweshwari Soc. Condition of UUC > Working [Morewasti Chikhali Pune-411062 Location of calibration _:- On Site i Enviromental Conditions |Ambient Temp. - 25 to 35°C [Relative Humidity - 45 to 75 % Rh Description of UC Name 7 Battery Gutter Machine Range 010 8000 Rpm Make > DeWalt Resolution - ID No. :— Location oe Sr.No. 126557 haat Type Analog Q ili, Reference Standards used for calibration Anne Name Digital Tacho Meter om 1.0 No. + ASDIMO1 fal Sr.No. = 12100220 ieee fl certificate No - ACS/059/CM 27/230001 = (Calibration Validity 24.09.2024 Iv.Calibration Results (RPM) SrNo. UUC Reading (RPM) | Standard Reading (RPM) Error (RPM) 1 3000 8998 2.0 Note 11) UC stands for Unit Under Calibration 2) This ceniticate refers only to the particular item submitted for calibration 3) This certificate shall not be reproduced, except in full unless written permission for the publication of ‘an approved abstract has been obtained from the Technical Manager of AS CALIBRATION SERVICES, Pune. 4) The calibration results reported in the certificate are valid at the time of and under the stated conditions . lof measurement, i CERT [Calibrated By a Approved By Mr. Akshay A Aneray 7 ‘Mr. Amol D Survase [Calibration Engineer Technical Manager END OF CERTFGATE® AS CALIBRATION SERVICES @ Reg. OFfex : 46072632, Sant Tukatam Nagar. Pinot Pune 411 018. contact@ascabratoncom ©) +81 9765272767 / +01 7263090000