Creation date: 04.05.
2022
Remazol® Black B 133%
Short profile:
Economical, dischargeable navy, mainly for deep shades. Often used in combination with Remazol Exhaust dyeing process
Yellow 3RS 150% and Remazol Brilliant Red 3BS 150%. Limited light and perspiration wet light CO-tricot, bleached
fastness. Good build up. Good wash-off properties
Commercial form: Powder Granulate Liquid
133%
Suitability
X Exhaust dyeing process 1%
X Cold pad-batch process
X Pad-dry-pad-steam process
X Pad-dry-steam process
X Pad-steam process
X Econtrol® process
3%
X Pad-dry-thermofix process
X PES/CEL reverse process
(X) TTN-process
Neutral solubility without 100 g/l
salt
Exhaust dyeing process
6%
X X
Recommended dyeing temperature 50 °C 60 °C 80 °C
Cold pad-batch process
Solubility under dyeing conditions (g/l) CO bleached, mercerized
Neutral substantivity medium Glauber´s salt calc. Common salt
Reactivity high 50 g/l 80 g/l 50 g/l 80 g/l
Fixation value >80% 15 15 15 15 7 g/kg
Continuous process
Process Pad-dry-pad-steam Pad-dry-steam Pad-steam Pad-dry-thermofix
Solubility (g/l) 100 100 100 100
Liquor stability (h) - 6 6 6
20 g/kg
55 g/kg
All data in the pattern card refer to the respective dye in 100% strength.
All fastness properties of the product were tested only as single product on standard materials and not in combinations/blends.
Creation date: 04.05.2022
Remazol® Black B 133%
Cold pad-batch process
Solubility (g/l) Liquor stability (min) Fixation time (h)
Method without 100 g/l merc.
20°C 25°C 30°C 40°C CO CV
urea urea CO
Silicate 50 / Caustic soda 100 100 20 10 - - 6 6 6
Soda ash / Caustic soda 100 100 20 10 - - 8 8 8
Silicate 95 / Caustic soda 100 100 - 30 15 - 6 6 6
Silicate / Caustic Soda Tropical variant 100 100 - - 30 30 6 6 6
Fixation value >90%
All data in the pattern card refer to the respective dye in 100% strength.
All fastness properties of the product were tested only as single product on standard materials and not in combinations/blends.
Creation date: 04.05.2022
Remazol® Black B 133%
Fastness properties Cotton bleached, mercerized
Standard depth 1/12 1/6 1/3 1/1 Black
Light fastness (Xenon arc)
3 3-4 3-4 4 5
ISO 105-B02
Standard Depth Black F CTA CA CO PA 6.6 PES PAN CV WO
Home laundry / washing
50 °C 5 5 5 5 5 5 4-5
ISO 105-C06-B2S
Home laundry / washing
60 °C 5 5 4-5 5 4-5 5 5
ISO 105-C06-C2S
Home laundry / washing
60 °C, 5x 4-5 4-5 4-5 4-5 4-5 5 5
ISO 105-C06-C2
Washing 50 °C / 120 °F 5 5 5 5 5 5 5
AATCC TM 61 - 2A
Washing 70 °C / 160° F
4-5 5 4-5 5 5 5 4-5
AATCC TM 61 - 3A
Standard Depth Black F CO CV WO
Water fastness, severe
ISO 105-E01 5 4-5 4-5
Perspiration fastness, alkaline
ISO 105-E04 5 4-5 5
Perspiration fastness, acid
ISO 105-E04 5 4-5 5
Fastness to chlorinated water
(20 mg/l active chlorine) ISO 105-E03 4
Hypochlorite bleaching, mild
DIN 54034 1
Mercerizing
ISO 105-X04 5* 3
Hot pressing, dry, immediate/4h
ISO 105-X11-T 4-5/5
Hot pressing, wet, immediate/4h
ISO 105-X11-N 4-5/5 5
Rubbing dry / wet
ISO 105-X12 4-5/2-3
Nitrogen oxides, 1x / 3x
ISO 105-G01 5/5
Dry-cleaning (perchloroethylene)
ISO 105-D01 4-5/5
Dischargeability CO
White discharge Colored discharge
Discharge recipe I II III
+++1) +++ +++
All data in the pattern card refer to the respective dye in 100% strength.
All fastness properties of the product were tested only as single product on standard materials and not in combinations/blends.
Creation date: 04.05.2022
Remazol® Black B 133%
Fastness properties Viscose staple fiber
Standard depth 1/12 1/6 1/3 1/1 Black
Light fastness (Xenon arc)
3 3-4 3-4 4 5
ISO 105-B02
Standard Depth Black F CTA CA CO PA 6.6 PES PAN CV WO
Home laundry / washing
50 °C 5 5 5 5 5 5 5
ISO 105-C06-B2S
Home laundry / washing
60 °C 5 5 4-5 5 4-5 4-5 5
ISO 105-C06-C2S
Home laundry / washing
60 °C, 5x 5 4-5 4-5 5 4-5 4-5 4-5
ISO 105-C06-C2
Washing 50 °C / 120 °F
5 5 5 5 5 5 5
AATCC TM 61 - 2A
Washing 70 °C / 160° F
5 5 4-5 4-5 4-5 4-5 4-5
AATCC TM 61 - 3A
Standard Depth Black F CO CV WO
Water fastness, severe
ISO 105-E01 5 4-5 4-5
Perspiration fastness, alkaline
ISO 105-E04 5 4-5 4-5
Perspiration fastness, acid
ISO 105-E04 5 4-5 4-5
Fastness to chlorinated water
(20 mg/l active chlorine) ISO 105-E03 4
Hypochlorite bleaching, mild
DIN 54034 1
Mercerizing
ISO 105-X04
Hot pressing, dry, immediate/4h
ISO 105-X11-T 4-5/5
Hot pressing, wet, immediate/4h
ISO 105-X11-N 4-5/5 5
Rubbing dry / wet
ISO 105-X12 4-5/2-3
Nitrogen oxides, 1x / 3x
ISO 105-G01 5/4-5
Dry-cleaning (perchloroethylene)
ISO 105-D01 5/5
Dischargeability CV
White discharge Colored discharge
Discharge recipe I II III
+++1) +++1) +++
All data in the pattern card refer to the respective dye in 100% strength.
All fastness properties of the product were tested only as single product on standard materials and not in combinations/blends.
Creation date: 04.05.2022
Remazol® Black B 133%
Shade in artificial light (TL 84)
somewhat redder
Resin finishing
Cotton bleached, mercerized 1/1 SD
Change of shade Light fastness
Evo Pret RSL + MgCl2 somewhat brighter =
Evo Pret RSL + Evo Pret-Cat KWO similar =
Evo Pret RFF + Evo Pret-Cat KFL somewhat brighter/bluer -
Evo Pret RCI (Kat. included)
Staining of adjacent fibers Partial stripping, stripping
(1/1 SD, merc. CO, LR 1:15)
CO
I Partial stripping
PA 6.6, filament
PA 6.6, staple fiber I
CA
II
CTA
Stripping method
WO
III
PES
PAN IV
CV
CO bleached, merc.
Notes
Warranty Information
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and
this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its
validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our
products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own
responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery.
All data in the pattern card refer to the respective dye in 100% strength.
All fastness properties of the product were tested only as single product on standard materials and not in combinations/blends.
Creation date: 04.05.2022
Remazol® Black B 133%
Short profile:
Economical, dischargeable navy, mainly for deep shades. Often used
in combination with Remazol Yellow 3RS 150% and Remazol Brilliant
Red 3BS 150%. Limited light and perspiration wet light fastness. Good
build up. Good wash-off properties
1/1 1/3
Flat-bed printing
on cotton, merc.
Full shade/reduction 1/3
The fastness properties were tested in 1/1 standard depth
(Lightfastness was tested additional on standard depth of 1/6)
Powder/Gran. Liquid
Dye concentration
Fastness properties
1/1 SD 1/6 SD
Light fastness (Xenon arc) ISO 105-B02
4 3
F CO
Home laundry / washing
60 °C ISO 105-C06-C2S 5 5
Home laundry / washing 95 °C ISO 105-C06-E2S 3 3
Washing fastness 95 °C ISO 105-C08 3 3
Dry-cleaning (perchloroethylene) ISO 105-D01 4-5
Water fastness, severe ISO 105-E01 5 5
Fastness to chlorinated water (20 mg/l active chlorine) ISO 105-E03 4
Perspiration fastness, alkaline ISO 105-E04 5 3-4
Perspiration fastness, acid ISO 105-E04 5 3-4
All data in the pattern card refer to the respective dye in 100% strength.
All fastness properties of the product were tested only as single product on standard materials and not in combinations/blends.
Creation date: 04.05.2022
Remazol® Black B 133%
Suitability for
Atmospheric steaming 8 - 12 min 102 °C suitable
Superheated steam (PES/Cell.) 6 - 8 min 175 °C suitable
Thermofixation 5 min 150 °C limited suitability
Two-phase steaming 90 sec 125 °C suitable
Articles
Wool/Silk suitable
Seersucker limited suitability
Reactive resist under Remazol dyes suitable
Ecological profile
Metal complex
Organohalogenes in the reactive group
Warranty Information
This information and our technical advice - whether verbal, in writing or by way of trials - are given in good faith but without warranty, and
this also applies where proprietary rights of third parties are involved. Our advice does not release you from the obligation to check its
validity and to test our products as to their suitability for the intended processes and uses. The application, use and processing of our
products and the products manufactured by you on the basis of our technical advice are beyond our control and, therefore, entirely your own
responsibility. Our products are sold in accordance with our General Conditions of Sale and Delivery.
All data in the pattern card refer to the respective dye in 100% strength.
All fastness properties of the product were tested only as single product on standard materials and not in combinations/blends.
