Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
Product Specification
QIANGLI OUTDOOR
MKX Q3.98
Product: Outdoor Q3.98 1/10 Scan Module – High Refresh Rate
Item No.: Q2.98-10S-PRO-2525
Version: 2.7
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
Website: www.qiangliled.com
Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
1.Product Specification
1.1.The outdoor full color display has a clearer and more detailed display, and the
resolution can reach above 1080P; it can achieve high refresh rate, high grayscale
and higher lamp utilization. And it has the functions of no afterimage, anti-caterpillar,
low power consumption, low surge, etc.
1.2.The outdoor full color display is mainly composed of a red LED chip, a green LED
chip and a blue LED chip packaged into a matrix of pixels, and then fixed to a plastic
package.
1.3.The outdoor full color display contains driving IC and input buffer chip, which can
display video, image and text information when connected to the LED display control
system.
1.4.Through the system control to drive the red LED, green LED and blue LED driving
IC, 4,398 billion color conversions can be formed.
1.5.The panel and the cabinet can be spliced arbitrarily in the horizontal and vertical
directions to form different sizes of display screens.
1.6.Features
• High-quality lamps, high-efficiency lamp brightness utilization rate, while
guaranteeing lamp lifespan and high-quality plastic component
• High contrast can achieve good display effect.
• The weight is easy to install and disassembly.
• Single point and single lamp maintenance can be carried out, with low cost.
• It is driven by a constant current, with uniform light emission and low
power consumption.
1.7.Module Picture
Front View Rear View
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
Website: www.qiangliled.com
Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
1.8. MG Cabinet 640*480
Front View Back View
Side View Screw
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
Website: www.qiangliled.com
Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
2.Technical Specification
Pixel Pitch 3.98mm Pixel Density 62500Dots/㎡
Configuration 1R1G1B LED Lamp SMD2525
Size
320*160*14mm Weight 0.52kg±0.01kg
(Width*Height*Depth)
Structure Lamp & IC in same PCB Resolution 80*40=3200Dots
Module Input Voltage (DC) 4.5±0.1V Maximum Current ≤10.34A
Power Constant Current
≤47W Driving Method
Consumption 1/10 Scan
40A Power Supply 50A Power Supply
2-3 pcs module 5-6 pcs module
for for
40A PFC Power 80A Power Supply
3-4 pcs module 3-4 pcs module
Supply for for
640mm*480mm*84mm
Cabinet Size (Width*Height*Thickness) (Thickness including module、 cabinet
and connecting piece)
Cabinet Pixel Density 160*120=19200Dots
Cabinet Area 0.307㎡
Cabinet Cabinet Weight 9.95kg±0.05 kg
Cabinet Max Power Consumption ≤560W
Average Power Consumption (1/3 Max) ≤185W
Distribution Power (Power Supply Capacity 78%) ≤715W
Brightness 5000cd/㎡ Brightness ＞0.95
Uniformity
Horizontal Viewing Vertical Viewing
140 ±10 degree 130 ±10 degree
Angle Angle
Best Viewing ≥3.98m Black Spot Ratio < 0.0003； 0 when
Screen
Distance shipped from the factor
Max Power Operation
≤909 W/㎡ Outdoor
Consumption Environment
Grayscale 14-16bits (RGB each) Display Color 4398 Billion
Frame Frequency ≥60 frame/sec Refresh Frequency ≥3840 Hz
Computer control,
Point-to-point, Video Brightnes 256-grade manual /
Control Mode synchronization, real- s automatic
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
Website: www.qiangliled.com
Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
time display Adjustme
nt
Input signal DVI/VGA/HDMI/DP, composite video signal, S-VIDEO, YpbPr(HDTV)
Life Span ≥100,000 hours Average Failure Free ≥10,000 hours
Time
Attenuation
≤15％ Operating Humidity 10％-65％RH
(3 years later)
(No condensation)
`
3. Amplitude range
Screen installation method: It can be used as outdoor rental, and supports fixed
installation, hoisting and wall installation etc, to meet the needs of various outdoor
installation environments.
4. Screen acceptance requirements and methods:
4.1. Screen brightness: adjust the screen to full brightness, adjust the brightness efficiency
in the test software to 80% on the computer, and use a light gun to measure the brightness of
the screen within 10 minutes. Measuring the brightness requires that the light gun should be
aimed at the screen body. It is best to measure the light gun to keep the screen body level,
make sure that the black position of the observation window covers more than 16 pixels, and
adjust the focal length for measurement.
4.2 Viewing angle: when measuring, people stand at a position of 140° left and right of the
screen, and the viewing angle below the screen is 65°. It is required that the screen has no
obvious black spots and no obvious dark blocks.
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
Website: www.qiangliled.com
Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
Screen upper and lower Left and right viewing
viewing angle angles of the screen
4.3.Grounding: The shell, box and screen structure of the switching power supply are
properly grounded, the grounding point is correctly marked with the grounding mark, and a spot
check is carried out every six months;
4.4 Lightning protection treatment: the building is required to have lightning rod or lightning
protection belt facilities and be effectively grounded, and the power distribution box is required
to be equipped with a surge protector, and the lightning protection facilities are required to be
inspected every six months.
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China 361100
Website: www.qiangliled.com
