Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
Product Specification
Product: Outdoor Full Color Q10 1/2 Scan Module
Item No.: Q10-2S-Pro-3535
Version: 2.8
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China
361100 E-mail：qiangli.indonesia@gmail.com Website: www.qiangliled.com
Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
1. Module Picture
Front View Rear View
2. Suggestion Cabinet -(960*960 Magnesium Cabinet )
Front View Rear View
3. Technical Specification
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China
361100 E-mail：qiangli.indonesia@gmail.com Website: www.qiangliled.com
Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
Pixel Pitch 10mm Pixel Density 10000Dots/㎡
Configuration 1R1G1B LED Lamp SMD3535
Size
(Width*Height*Dept 320*160*19mm Weight 0.48kg±0.01kg
h)
Lamp & IC in same
Structure Resolution 32*16=512Dots
Module PCB
Input Voltage (DC) 4.5±0.1V Maximum Current ≤9.75A
Power Constant Current
≤44W Driving Method
Consumption 1/2 Scan
40A Power Supply 50A Power Supply
2-3 pcs module 3-4 pcs module
for for
40A PFC Power 80A Power Supply
3-4 pcs module 4-6 pcs module
Supply for for
960mm*960mm*104.5mm （ with module,
cabinet）
Cabinet Size (Width*Height*Thickness)
960mm*960mm*169.5mm （ with module,
cabinet, connecting plate）
Cabinet Pixel Density 96*96=9216Dots
Cabinet
( Magnesi Cabinet Area 0.9216 ㎡
um
Cabinet Weight 30kg±0.5 kg
Cabinet)
Cabinet Max Power Consumption ≤790W
Average Power Consumption (1/3 Max) ≤263W
Distribution Power (Power Supply Capacity
≤1013W
78%)
Brightness ≥4500cd/㎡ Brightness Uniformity ＞0.95
Horizontal Viewing Vertical Viewing
140 ±10 degree 130 ±10 degree
Angle Angle
Best Viewing
≥10 m Black Spot Ratio < 0.0003
Distance
Max Power Operation
≤857W/㎡ Outdoor
Screen Consumption Environment
Grayscale 12-14bits (RGB each) Display Color 4398 Billion
Frame Frequency ≥60 frame/sec Refresh Frequency ≥3840 Hz
Computer control, Brightness 256-grade manual /
Control Mode
Point-to-point Adjustment automatic
Average Failure Free
Life Span ≥100,000 hours ≥10,000 hours
Time
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China
361100 E-mail：qiangli.indonesia@gmail.com Website: www.qiangliled.com
Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
Attenuation
≤15％ Operating Humidity 10％-90％RH
(3 years later)
4.Signal Pin
HUB75
Pin Signal Function Pin Signal Function
1 RD1 Red data signal 2 GD1 Green data signal
3 BD1 Blue data signal 4 GND GND
5 RD2 Red data signal 6 GD2 Green data signal
7 BD2 Blue data signal 8 GND GND
Line power control Line power control
9 A 10 B
signal signal
Line power control Line power control
11 C 12 D
signal signal
13 CLK Clock signal 14 LAT Data locking signal
15 OE Enable signal 16 GND GND
5.Precautions
Item Description
Storage temperature range: -10 ° C - 30 ° C, over 30 ° C
needs to do cooling treatment.
Operating temperature range: -20 ° C -40 ° C, other
Temperature temperature range, need to install temperature control
requirement equipment.
Lamp surface temperature (working time):
≤85°C, temperature control equipment is required to be
installed when temperature exceeding the standard
Environ
Storage humidity range: 10% RH-60% RH, humidity over
mental
60% RH requires dehumidification treatment.
Precauti Humidity
Operating humidity range: 10% RH-90% RH, If the humidity
ons requirement
exceeds the standard, it must be dehumidified before it can
be used normally.
Corrosive gas, which contains alkaline or acid gas in the
Avoiding
environment, may cause corrosion of electronic
corrosive gas
components, crystallization, leakage and so on.
Avoid Metal components of the screen, the shell of power supply
electrostatic and the cabinet should be grounded well, and the grounding
hazard and resistance should be less than 10Ω. Prevent electrostatic
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China
361100 E-mail：qiangli.indonesia@gmail.com Website: www.qiangliled.com
Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
lightning damage to electronic devices in humid environment, while
strikes avoiding electric leakage to harm human body.
The worker must wear an anti-electrostatic wrist strap and
Electro-static
anti- electrostatic glove. Various tools must be strictly
Protection
grounded during assembly
After installation of Led display screen, waterproof glue
Screen should be used on the connection part of cabinet and around
waterproof the screen, making sure strict waterproof protection
measures be implemented.
It’s not recommended customers install modules outdoor
with magnetic installation method. It will cause the following
hazards,
Hazard
1) Rain and snow could enter from the screen front side to
statement of
the screen back side, it may cause the electronic
the Magnetic
components, system card, power supply and cables be
installation
corroded and lose efficacy.
Method
2) The magnetic installation method cannot guarantee the
flatness and the performance of the led screen.
3) Module is likely to deform under extremely cold weather.
Different batches of products cannot be installed in the same
Product batch
Operati screen, otherwise there will be color blocks (mosaic) on the
control
onal display.
precauti The module cannot be directly connected to 220V, and the
ons Product wiring module’s positive and negative poles connection must be
right.
Disassembly
Do not throw, push, squeeze or press the module, avoid
and
damaging the display screen.
transportation
In connection with power supply, it is necessary to ensure
tightening of terminal joint screw to prevent joint position
Installation
from loosening, resulting in wire burning or product damage
torque control
caused by high contact resistance. Torque of M4 screw is
6.0-8.0 Kgf.cm, and that of M3 screw is 4.0-6.0 Kgf.cm.
Please do not display static picture or text, for this may
Display control cause LED lamp brightness go down seriously or LED lamp
die. Please play moving pictures or text.
It is forbidden to assemble the module under the condition of
Prohibition of
power on, the module should be assembled on the wall
live work
when the main power input is disconnected.
Temperature and humidity meters should be equipped on
Environmental the installation site to monitor the surrounding environment
inspection of the screen in time. After heavy rain, it is necessary to
check whether there are any problems such as dampness,
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China
361100 E-mail：qiangli.indonesia@gmail.com Website: www.qiangliled.com
Xiamen Qiangli Jucai Opto-Electronic Technology Co., Ltd.
water droplets and over humidity in the screen in time.
Avoid
It is strictly forbidden to rebuild after the installation of the
construction
LED display screen, so as to prevent the LED display screen
work near the
from being affected by the impact of high current and dust,
installed LED
such as welding, electric saw and other equipment.
screen
No. 8065, Building E6, West Xiang’an Road, Xiang’an Torch High-Tech Industrial Zone, Xiamen, China
361100 E-mail：qiangli.indonesia@gmail.com Website: www.qiangliled.com
