Powertite™ Series Pin and Sleeve Plugs, Connectors and Receptacles

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Applications
• Designed to supply power to portable or fixed electrical
equipment such as motor generator units, welders, pumps,
compressors, cellular relay stations, SCR/VFD houses, and
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

similar equipment.
• Ideal for use in "ship to shore" and backup/temporary power
applications.
• Suitable for use in locations where a weatherproof enclosure
is required.
30 and 60 Amp 100 and 150 Amp
• Rough usage construction.

Features
• Available in 30, 60, 100, 150, 200, and 400 Amp units.
• Available in two grounding styles: Style 1 (shell only) and
Style 2 (shell and extra pole).
• Neoprene bushing compressed by cable collar prevents
entrance of water. Bushing is highly resistant to hydrocarbon
deterioration and is self-extinguishing.
• Locking screw and slot prevents plug cable collar from
”backing off.”
• Contacts exert constant pressure along entire contact surface
and provide electrical continuity.
• Ambient temperature range of -25 °C to +40 °C
(-13 °F to +104 °F).
• Insulating blocks provide greatest dielectric and mechanical
strength and lowest arc tracking.
• Positive polarization: only plugs and receptacles of same style, 200 Amp 400 Amp
number of poles and ampere rating can be used together.
• Circuit breaking: in 30, 60, 100, 150 and 200 Amp units, any
arcing created as line and load terminals disengage is safely
confined deep within terminal cavities. Plugs may be withdrawn Options
in an emergency under full rated loads without separate • See Illustrated Options section for details.
disconnect switches (400 Amp plug is for disconnecting use • Standard Service, Reverse Service (Generator Application),
only; not for current rupturing). and Special Polarization.
• 30, 60, 100, and 150 Amp Powertite™ plugs also suitable for • Lock Collar accessory to secure plug and connector
classified locations when used with Appleton EBR, EBRH, JBR, connections from unauthorized intentional disconnection.
MD2SR, or DBR explosionproof interlocking receptacles. • NEMA 4X Cap accessory for plugs to protect insulation
• Controlled length contacts ensure that ground makes first and and plug contacts from moisture, dirt, dust and corrosion
breaks last for added safety. when not in use.
• Intermatability : Intermateable with Crouse-Hinds  Arktite®
and Powermate™, and Killark  Versamate®.
NEC/CEC Certifications and Compliances
• UL Standard: UL 1682, UL 1686, UL 50E
Standard Materials • UL Listed: E145916, E145917
• Plug, receptacle, connector and mounting box housings: • cULus Listed: E145917 (200 Amp)
copperfree (4/10 of 1% max.) aluminum • CSA Standard: C22.2 No. 182.1-13
• Insulating blocks: glass filled polyester • CSA Certified: 065179
• NEMA 4X (30, 60, 100, 150, and 200 Amp)
Standard Finishes • NEMA Configuration: FB11
• Aluminum plug, receptacle, connector and mounting box
housings: epoxy powder coat Related Products
• Insulating blocks and contacts: natural finish • For classified location plugs and receptacles, see Plugs and
Receptacles: Hazardous Location.

 Appleton Powertite series 30 through 100 Amps is UL Classified for use in specific combinations with Crouse-Hinds Arktite® .
 Arktite is a registered trademark of Cooper Crouse-Hinds.
 Versamate is a registered trademark of Hubbell Killark.

458 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ Series Pin and Sleeve Plugs, Connectors and Receptacles

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Illustrated Features

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Grounding strap in Style 2 receptacle from
extra pole to receptacle housing.
Screw locks receptacle housing and interior into
an assembly and permits easy field conversion to
reverse service for 30, 60, 100, 150, and 200 Amp.
Receptacle interior retaining washers.

Raintight mounting box gasket.

Arc snuffing chamber.
Grounding detent springs in Style 1 and Style 2.

Longer ground terminal in Style 2 receptacle

”makes first, breaks last.”
Floating-type plug terminal self-aligns to
receptacle contacts.

Screw locks plug housing and interior into an Plug with clamping ring has neoprene gasket.
assembly; also permits easy field conversion to Ring threads onto screw cap receptacle to
reverse service (30, 60, 100, and 150 Amp). provide NEMA 4X assembly when properly
tightened.
Grounding strap in Style 2 plug from Available in 30, 60, 100, and 150 Amp units.
extra pole to plug housing.

Cable grip assembly.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 459

© January 2024
 Powertite™ Series Pin and Sleeve Plugs, Connectors and Receptacles

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Illustrated Features
Grounding Styles

Style 1 Style 2
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

(Shell Only) (Shell and Extra Pole)

Portable cord,
Portable cord, 4-conductor
4-conductor RECEPTACLE
Grounding PLUG Fourth
thru conduit (grounding)
system wire,
if desired
PLUG Factory Grounding
Equipment RECEPTACLE Equipment installed thru conduit
grounding grounding jumper system and
connected connected exrta pole
to plug shell to extra pole
and plug shell

Plug—Equipment grounding conductor is wired directly to solderless Plug—Equipment grounding conductor is not only connected
lug which is connected to the plug housing with a pressure connector. to the solderless lug in the plug housing, but also to an extra
All terminals are ”current carrying.” grounding pole. Grounding pole has copper alloy grounding
jumper strap that connects to plug housing.
Receptacle—Two detent spring clips engage the grounded plug Receptacle—Two detent spring clips engage grounded plug
housing on plug insertion-grounded plug shell makes contact with housing on plug insertion. Jumper from extra grounding pole is
receptacle ground spring before line and load poles are engaged. electrically connected to a screw on receptacle housing. Longer
Grounding path is maintained until after current-carrying contacts grounding pole ”makes first and breaks last.”
disengage. All terminals are ”current carrying.”
Pin and Sleeve Design 

30, 60, and 100 Amp Pressure Wire Terminals. 150 Amp Pressure Wire Terminals.
Solid Brass Contacts with Beryllium Copper Springs. Solid Copper Contacts with Beryllium Copper Springs.

200 Amp Pressure Wire Terminals. Solid Copper Split-Type Contact.

400 Amp 0.84” Solder Well Wire Terminals. Solid Copper Contacts with Four Spring-Loaded Borosilicate Bearings.

400 Amp 1.25” Solder Wire Well Terminals. Solid Copper Contacts with Four Spring-Loaded Borosilicate Bearings.

 Pins and sleeves are not sold separately. Must be purchased as entire interior replacement. Available on the Replacement Interiors pages.

460 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ Series Pin and Sleeve Plugs, Connectors and Receptacles

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Illustrated Features

Spring Door and Screw Cap

30, 60, 100, and 150 Amp spring door and screw cap receptacles are

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

threaded to accept clamping ring ACP plug. The ring threads onto the
receptacle to form a raintight assembly with plug in use-and also to
prevent plug fallout. When the plug is withdrawn, the gasketed spring
door cover closes tightly against receptacle opening automatically,
providing weatherproof protection. Spring door has stainless steel Spring Door Cover Plug Threaded Screw Cap Plug with
spring and shaft. Automatically into Receptacle Clamping Ring
Closes

Spring Door Cover

30, 60, 100, and 150 Amp units may be located at any position in a
360° circle by adjusting a setscrew. Set screw also allows complete
removal of cover. Spring door available on 200 Amp units.
NOTE: Spring Door cover in open positions for illustration only.

ACP Plugs
Supplied with bushings to accommodate a wide variety of cable
diameters.

Reversible Cable Clamps

Permits wide cable range (just loosen screws and flip over).
Each position accommodates one of two bushings. Convenient in
installations having different cable sizes.
1st Position 2nd Position

Illustrated Options
Standard Service Reverse Service (Generator
Energized receptacle has recessed male Application)
contacts to reduce danger of accidental Useful where a ”hot” plug feeds
touching. Plug has female contacts that a dead receptacle. Reverse
are energized only upon insertion in service is often used for generator
receptacle. applications where the receptacle
houses a dead plug interior. Plug
houses an energized receptacle
interior, which has recessed
male contacts to reduce danger
of accidental touching. 30, 60,
100, 150, and 200 Amp units can
Special Polarization be easily converted to reverse
Special polarization is available on 30, 60, 100, 200, and 400 Amp service in the field when matching
units. Prevents plug insertion in a receptacle or connector wired for a plug and receptacle are ordered.
different voltage. In installations where there are different line voltages, 400 Amp unit is only available as
the special polarization option is desirable. This allows only plugs a factory assembled item at extra
and receptacles wired for the same line voltage to be mated together. cost. Add suffix -RS to receptacle
The receptacle or connector interior is positioned 22-1/2°, relative to or connector.
the polarization rivet, to the right (as specified) of standard, and plug
is polarized to correspond. Add suffix -P4 to the standard or reverse Lock Collar
service plug, receptacle or connector. Secures Plug and Connector
connections to prevent intentional
NEMA 4X Cap disconnection by unauthorized
Protects plug insulation and contacts personnel. For use with 60 and
from moisture, dirt, dust and corrosion 100 Amp Series Plugs and
when not in use. See product page for Connectors. Collar clamps
item number information. around fully tightened Plug and
Connector and secured via a
padlock. Order item PTLC60100.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 461

© January 2024
 Powertite™ Series Pin and Sleeve Plugs, Connectors and Receptacles

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Features at a Glance
Receptacle Types Contacts Reverse Service
Brass with Copper with Split-type Brass
Grounding Weatherproof NEMA 4X NEMA 4X Beryllium Copper Borosilicte Copper Ground In Factory
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Amp Styles Spring Door Screw Cap Clamp Cover Springs Bearings Contacts Contacts Field Only
30 1 and 2 X X X Style 2 X
60 1 and 2 X X X Style 2 X
100 1 and 2 X X X Style 2 X
150 2 X X Copper Style 2 X
200 1 and 2 X X X Style 2 X
400 1 and 2 X Style 2 X

Application Chart
Grounding Single Phase Grounding Three Phase
Style Wire/Pole With Neutral Without Neutral Style Wire/Pole With Neutral Without Neutral
2W, 2P L1+N+G L1+L2+G 2W, 2P
Style 1 Style 1
3W, 3P L1+L2+N+G 3W, 3P L1+L2+L3+G
(Shell Only) (Shell Only)
4W, 4P 4W, 4P L1+L2+L3+N+G
Style 2 2W, 3P L1+N+G L1+L2+G Style 2 2W, 3P
(Shell and (Shell and
Extra Pole) 3W, 4P L1+L2+N+G Extra Pole) 3W, 4P L1+L2+L3+G

Range of Wire Sizes Accommodated in Powertite™ Plug and Receptacle Terminals

60 °C (140 °F) minimum wire ratings.

30, 60, 100, and 150 Amp 200 Amp 400 Amp
Wire Recess Wire Range Wire Recess Conductor Type Solder Recess Conductor Type
Amps Dia. (Inches) Building Extra Flex. Dia. (Inches) Size Conductor Dia. (Inches) Size Conductor
30 .281 #10 – #6 #10 – #8 250 General Wire 500 MCM General Wire
60 .312 #6 – #2 #6 – #4 4/0 General Wire 0.84 400 MCM Flex. Cable
100 .391 #4 – #1 #4 – #2 4/0 Flex. Cable 400 MCM Extra Flex.
0.687
150 .525 #2 – 2/0 #2 – 2/0 3/0 Flex. Cable 1000 MCM General wire
3/0 Extra Flex. 1.25 900 MCM General Wire
2/0 Flex. Cable 800 MCM Extra Flex.

Horsepower Ratings at Full-Load Current Horsepower Ratings for Emergency Disconnect Only
Values are derived from NEC Article 430 Table 430.250. The voltages Plug may be withdrawn in an emergency if within these maximum HP
listed are nominal motor voltages. ratings. Not for normal starting/stopping.

Motor Horsepower Motor Horsepower

Motor Phase Amps 240 Vac 480 Vac 600 Vac Motor Phase Amps 115 Vac 240 Vac 480 Vac 600 Vac
Full-Load Current For Emergency Disconnect Only 
30 10 20 25 30 3 7-1/2 15 20
60 20 40 50 60 7-1/2 15 30 30
3-Phase 100 30 75 100 3-Phase 100 10 20 40 40
150 50 100 150 150 Do Not Disconnect Under Load
200 75 150 200 200 20 40 50 50

 For 1-Phase Emergency Disconnect HP ratings please refer to each amperage section.

462 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 30 Amp Pin and Sleeve Plugs and Receptacles
600 Vac, 250 Vdc, 50-400 Hz
Pressure Wire Terminals – Wire Recess Diameter: .281”. Wire Size Range: #10—#6 Building; #10—#8 Extra Flex.

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Grounding Receptacle with AEE Hub Size Receptacle Metallic Clamping Nonmetallic Clamping Plug Cable
Style Wire/Pole Mounting Box  (Inches) Only  Ring Plug  Ring Plug  Dia. (Inches)
ADRE3022-50 1/2
2W, 2P ADR3022 ACP3022BC ­— .500 to 1.125
ADRE3022-75 3/4

Style 1 ADRE3033-75 3/4

3W, 3P ADR3033 ACP3033BC ­— .500 to 1.125
(Shell Only) ADRE3033-100 1
ADRE3044-75 3/4
4W, 4P ADR3044 ACP3044BC ­— .500 to 1.125
ADRE3044-100 1
ADRE3023-75 3/4
2W, 3P ADR3023 ACP3023BC ­— .500 to 1.125
Style 2 ADRE3023-100 1
(Shell and
Extra Pole) ADRE3034-75 3/4
3W, 4P ADR3034 ACP3034BC NMACP3034BC .500 to 1.125
ADRE3034-100 1
Receptacles are provided with spring door and screw cover.
For Reverse Service, add suffix -RS to Catalog Number.
For Special Polarization, add suffix -P4 to Catalog Number.

Horsepower Ratings at Full-Load Current

Below values are derived from NEC article 430 Table 430.250. The voltages listed are nominal motor voltages.

Motor Horsepower
Motor Phase 240 Vac 280 Vac 600 Vac
3-Phase 10HP 20HP 25HP

Horsepower Ratings for Emergency Disconnect Under Load

Plug may be withdrawn in an emergency if within these maximum HP ratings. Not for normal starting and stopping.

Motor Horsepower
Motor Phase 120 Vac 240 Vac 480 Vac 600 Vac
1-Phase 2HP 3HP 10HP 10HP
3-Phase 3HP 7-1/2HP 15HP 20HP

 For additional mounting boxes, see Aluminum Mounting Boxes.

 Plug and receptacle combination is NEMA 4X rated when clamping ring is fully tightened on receptacle.
 Receptacle is NEMA 4X rated when screw cover is fully engaged when the receptacle is not in use.
 Reverse service and special polarization options are not available on nonmetallic plugs.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 463

© January 2024
 Powertite™ 30 Amp Pin and Sleeve Connectors and Plugs
600 Vac, 250 Vdc, 50-400 Hz
Pressure Wire Terminals – Wire Recess Diameter: .281”. Wire Size Range: #10—#6 Building; #10—#8 Extra Flex.

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Connector/Plug
Grounding Connector Body Metallic Clamping Cable Dia.
Style Wire/Pole Only Ring Plug  (Inches)
2W, 2P ARC3022BC ACP3022BC .500 to 1.125
Style 1
3W, 3P ARC3033BC ACP3033BC .500 to 1.125
(Shell Only)
4W, 4P ARC3044BC ACP3044BC .500 to 1.125
Style 2 2W, 3P ARC3023BC ACP3023BC .500 to 1.125
(Shell and
Extra Pole) 3W, 4P ARC3034BC ACP3034BC .500 to 1.125
For Reverse Service, add suffix -RS to Catalog Number.
For Special Polarization, add suffix -P4 to Catalog Number.

Pin and Sleeve Design

Energized contacts deeply recessed to reduce danger Pressure wire terminals allow cable to be readily
of accidental touching, minimize possibility of exposed replaced when necessary. Terminal screws grip
arcs. Insulator quenches arcing, and is resistant to conductors firmly. Spring contacts provide constant
abnormal heat and to fire. pressure.

Plug mechanical cable clamps provide strain relief

conductor connections, allow easy cable replacement.

 Plug and connector body combination is NEMA 4X rated when clamping ring is fully tightened on connector body.

464 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 60 Amp Pin and Sleeve Plugs and Receptacles
600 Vac, 250 Vdc, 50-400 Hz
Pressure Wire Terminals – Wire Recess Diameter: .312”. Wire Size Range: #6—#2 Building; #6—#4 Extra Flex.

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Grounding Receptacle with AEE Receptacle with Hub Size Receptacle Metallic Clamping Nonmetallic Clamping Plug Cable
Style Wire/Pole Mounting Box  AJA Mounting Box  (Inches) Only  Ring Plug  Ring Plug  Dia. (Inches)
ADRE6022-100 ADJA6022-100 1
2W, 2P ADR6022 ACP6022BC ­— .500 to 1.375
ADRE6022-125 ADJA6022-125 1-1/4

Style 1 ADRE6033-100 ADJA6033-100 1

3W, 3P ADR6033 ACP6033BC ­— .500 to 1.375
(Shell Only) ADRE6033-125 ADJA6033-125 1-1/4
ADRE6044-125 ADJA6044-125 1-1/4
4W, 4P ADR6044 ACP6044BC ­— .500 to 1.375
ADRE6044-150 ADJA6044-150 1-1/2
ADRE6023-100 ADJA6023-100 1
2W, 3P ADR6023 ACP6023BC ­— .500 to 1.375
Style 2 ADRE6023-125 ADJA6023-125 1-1/4
(Shell and
Extra Pole) ADRE6034-125 ADJA6034-125 1-1/4
3W, 4P ADR6034 ACP6034BC NMACP6034BC .500 to 1.375
ADRE6034-150 ADJA6034-150 1-1/2
Receptacles are provided with spring door and screw cover.
For Reverse Service, add suffix -RS to Catalog Number.
For Special Polarization, add suffix -P4 to Catalog Number.

Horsepower Ratings at Full-Load Current

Below values are derived from NEC article 430 Table 430.250. The voltages listed are nominal motor voltages.

Motor Phase 240 Vac 480 Vac 600 Vac

3-Phase 20HP 40HP 50HP

Horsepower Ratings for Emergency Disconnect Under Load

Plug may be withdrawn in an emergency if within these maximum HP ratings. Not for normal starting and stopping.

Motor Phase 120 Vac 240 Vac 480 Vac 600 Vac
1-Phase 3HP 10HP 20HP 20HP
3-Phase 7-1/2HP 15HP 30HP 30HP

 For additional mounting boxes, see Aluminum Mounting Boxes.

 Plug and receptacle combination is NEMA 4X rated when clamping ring is fully tightened on receptacle.
 Receptacle is NEMA 4X rated when screw cover is fully engaged when the receptacle is not in use.
 Reverse service and special polarization options are not available on nonmetallic plugs.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 465

© January 2024
 Powertite™ 60 Amp Pin and Sleeve Connectors and Plugs
600 Vac, 250 Vdc, 50-400 Hz
Pressure Wire Terminals – Wire Recess Diameter: .312”. Wire Size Range: #6—#2 Building; #6—#4 Extra Flex.

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Connector/Plug
Grounding Connector Metallic Clamping Cable Dia.
Style Wire/Pole Body Only Ring Plug  (Inches)
2W, 2P ARC6022BC ACP6022BC .500 to 1.375
Style 1
3W, 3P ARC6033BC ACP6033BC .500 to 1.375
(Shell Only)
4W, 4P ARC6044BC ACP6044BC .500 to 1.375
Style 2 2W, 3P ARC6023BC ACP6023BC .500 to 1.375
(Shell and
Extra Pole) 3W, 4P ARC6034BC ACP6034BC .500 to 1.375
For Reverse Service, add suffix -RS to Catalog Number.
For Special Polarization, add suffix -P4 to Catalog Number.

Pin and Sleeve Design

Energized contacts deeply recessed to reduce danger of Pressure wire terminals allow cable to be readily
accidental touching, minimize possibility of exposed arcs. replaced when necessary. Terminal screws grip
Insulator quenches arcing, and is resistant to abnormal heat conductors firmly. Spring contacts provide constant
and to fire. pressure.

Plug mechanical cable clamps provide strain relief at

conductor connections, allow easy cable replacement.

 Plug and connector body combination is NEMA 4X rated when clamping ring is fully tightened on connector body.

466 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 100 and 150 Amp Pin and Sleeve Plugs and Receptacles
600 Vac, 250 Vdc, 50-400 Hz
Pressure Wire Terminals – 100 Amp: Wire Recess Diameter: .391”. Wire Size Range: #4—#1 Building; #4—#2 Extra Flex.
150 Amp: Wire Recess Diameter: .525”. Wire Size Range: #2—2/0 Building; #2—#2/0 Extra Flex.
NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Grounding Receptacle with Hub Size Receptacle Clamping Ring Plug Cable
Style Wire/Pole AJA Mounting Box  (Inches) Only  Plug  Dia. (Inches)
ADJA1022-125 1-1/4
2W, 2P ADR1022 ACP1022CD .875 to 1.906
ADJA1022-150 1-1/2
100 Amp ADJA1033-125 1-1/4
Style 1 3W, 3P ADR1033 ACP1033CD .875 to 1.906
(Shell Only) ADJA1033-150 1-1/2
ADJA1044-150 1-1/2
4W, 4P ADR1044 ACP1044CD .875 to 1.906
ADJA1044-200 2
ADJA1023-125 1-1/4
100 Amp 2W, 3P ADR1023 ACP1023CD .875 to 1.906
Style 2 ADJA1023-150 1-1/2
(Shell and ADJA1034-150 1-1/2
Extra Pole) 3W, 4P ADR1034 ACP1034CD .875 to 1.906
ADJA1034-200 2

150 Amp Style 2 ADJA15034-150 1-1/2 ACP15034CD .875 to 1.906

3W, 4P ADR15034
(Shell and Extra Pole) ADJA15034-200 2 ACP15034DE 1.250 to 2.187
Receptacles are provided with spring door and screw cover.
For Reverse Service, add suffix -RS to Catalog Number.
For Special Polarization for 100 Amp units, add suffix -P4 to Catalog Number. (Not available for 150 Amp units.)

Horsepower Ratings at Full-Load Current

Below values are derived from NEC article 430 Table 430.250. The voltages listed are nominal motor voltages.

Motor Horsepower
Amp Motor Phase 240 Vac 480 Vac 600 Vac
100 3-Phase 30HP 75HP 100HP
150 3-Phase 50HP 100HP 150HP

Horsepower Ratings for Emergency Disconnect Under Load

Not for normal starting and stopping, but plug may be withdrawn in an emergency if within these maximum HP ratings.

Motor Horsepower
Amp Motor Phase 120 Vac 240 Vac 480 Vac 600 Vac
1-Phase 7-1/2HP 15HP 30HP 30HP
100
3-Phase 10HP 20HP 40HP 40HP
150 3-Phase Do Not Disconnect Under Load

 For additional mounting boxes, see Aluminum Mounting Boxes.

 Plug and receptacle combination is NEMA 4X rated when clamping ring is fully tightened on receptacle.
 Receptacle is NEMA 4X rated when screw cover is fully engaged when the receptacle is not in use.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 467

© January 2024
 Powertite™ 100 and 150 Amp Pin and Sleeve Connectors and Plugs
600 Vac, 250 Vdc, 50-400 Hz
Pressure Wire Terminals – 100 Amp: Wire Recess Diameter: .391”. Wire Size Range: #4—#1 Building; #4—#2 Extra Flex.
150 Amp: Wire Recess Diameter: .525”. Wire Size Range: #2—2/0 Building; #2—#2/0 Extra Flex.
NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Grounding Connector Body Clamping Ring Connector/Plug

Style Wire/Pole Only Plug  Cable Dia. (Inches)
2W, 2P ARC1022CD ACP1022CD .875 to 1.906
100 Amp
Style 1 3W, 3P ARC1033CD ACP1033CD .875 to 1.906
(Shell Only)
4W, 4P ARC1044CD ACP1044CD .875 to 1.906

100 Amp 2W, 3P ARC1023CD ACP1023CD .875 to 1.906

Style 2
(Shell and
Extra Pole) 3W, 4P ARC1034CD ACP1034CD .875 to 1.906

150 Amp  3W, 4P ARC15034CD ACP15034CD .875 to 1.906

Style 2
(Shell and
Extra Pole) 3W, 4P ARC15034DE ACP15034DE 1.250 to 2.187

For Reverse Service, add suffix -RS to Catalog Number.

For Special Polarization for 100 Amp units, add suffix -P4 to Catalog Number. (Not available for 150 Amp units.)

Pin and Sleeve Design

Solid Brass (100A) or Copper (150A)

Contact with Beryllium Copper Springs

Energized contacts deeply recessed to reduce danger of accidental Pressure wire terminals allow cable to be readily
touching, minimize possibility of exposed arcs. Insulator quenches replaced when necessary. Terminal screws grip
arcing, and is resistant to abnormal heat and to fire. conductors firmly. Spring contacts provide constant
pressure.
Plug mechanical cable clamps provide strain relief at conductor
connections, allow easy cable replacement.

 Plug and receptacle combination is NEMA 4X rated when clamping ring is fully tightened on receptacle.
 Powertite 150 Amp ARC connectors are not UL listed or CSA certified.

468 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ Lock Collar 60 and 100 Amp
For Plugs and Connectors

Applications
• Secures Plug and Connector connections to prevent intentional
disconnection by unauthorized personnel.
• For use with 60 and 100 Amp Series Plugs and Connectors.

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

• Collar clamps around fully tightened Plug and Connector
and secured via a padlock.
Standard Materials
• Shell: PA6 plastic
• Rubber inserts: NR rubber
• Padlock: Stainless steel

Open View Keyed Padlock Feature

Closed View

Ordering Information
Catalog Number Amp For Use With 60 Amp Series Plug and Connector For Use With 100 Amp Series Plug and Connector
ACP6022BC & ARC6022BC ACP1022CD & ARC1022CD
ACP6033BC & ARC6033BC ACP1033CD & ARC1033CD
PTLC60100 60 & 100 ACP6044BC & ARC6044BC ACP1044CD & ARC1044CD
ACP6023BC & ARC6023BC ACP1023CD & ARC1023CD
ACP6034BC & ARC6034BC ACP1034CD & ARC1034CD

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 469

© January 2024
 Powertite™ 30, 60, and 100 Amp Caps
For Plug

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 4X

Applications
• Protects insulation and plug contacts from excessive moisture,
dirt, dust, and corrosion when portable equipment is not in use.
• For use with 30 Amp 3-Pole and 4-Pole, 60 Amp 4-Pole and
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

100 Amp 4-Pole plugs.

• Cap is secured to plug by aviation cable. When in use the cap
is held in place with standard plug clamping ring.
Standard Materials
• Cap: ABS plastic

Ordering Information
Catalog Number Amp For Use With
ACP3023BC
ACP3033BC
ACPCAP3034 30
ACP3034BC
ACP3044BC
ACP6034BC
ACPCAP6004 60
ACP6044BC
ACP1034CD
ACPCAP1004 100
ACP1044CD

470 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Aluminum Mounting Boxes
For Powertite™ 30, 60, 100, and 150 Amp Receptacles

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

30 Amp

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Hub Size (Inches) AEE AERH AERC AERA
1/2 AEE13 AERH13 AERC13 AERA13
3/4 AEE23 AERH23 AERC23 AERA23
1 AEE33 AERH33 AERC33 AERA33

60 and 100 Amp

Hub Size (Inches) AEE AERH AERC AERA

1 AEE36 AERH36 AERC36 AERA36
1-1/4 AEE46 AERH46 AERC46 AERA46
1-1/2 AEE56 AERH56 AERC56 AERA56

60, 100, and 150 Amp

Hub Size (Inches) AJA Back Box and Adapter  Angle Adapter Only
1 AJA310
1-1/4 AJA410
AJA100
1-1/2 AJA510
2 AJA610

Replacement Receptacle Mounting Gasket

Amp Back Box Type Part Number
30 AEE, AERH, AERC, AERA 69060871000
60, 100 AEE, AERH, AERC, AERA 69060567000
60, 100, 150 AJA 69009497000

 Feed-Thru box furnished with one close-up plug in bottom recessed hub.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 471

© January 2024
 Powertite™ 30, 60, 100, and 150 Amp Replacement Interiors
600 Vac, 250 Vdc, 50-400 Hz

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

30 Amp 
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Grounding Style Wire/Pole Receptacle Plug Receptacle Plug

2W, 2P ARI-3022 API-3022 –– ––
Style 1
3W, 3P ARI-3033 API-3033 –– ––
(Shell Only)
4W, 4P ARI-3044 API-3044 –– ––

Style 2 2W, 3P –– –– ARI-3023 API-3023

(Shell and Extra Pole) 3W, 4P –– –– ARI-3034 API-3034

60 Amp 

Grounding Style Wire/Pole Receptacle Plug Receptacle Plug

2W, 2P ARI-6022 API-6022 –– ––
Style 1
3W, 3P ARI-6033 API-6033 –– ––
(Shell Only)
4W, 4P ARI-6044 API-6044 –– ––

Style 2 2W, 3P –– –– ARI-6023 API-6023

(Shell and Extra Pole) 3W, 4P –– –– ARI-6034 API-6034

100 and 150 Amp 

Grounding Style Wire/Pole Receptacle Plug Receptacle Plug

2W, 2P ARI-1022 API-1022 –– ––
Style 1
3W, 3P ARI-1033 API-1033 –– ––
(Shell Only)
4W, 4P ARI-1044 API-1044 –– ––
2W, 3P –– –– ARI-1023 API-1023
Style 2
(Shell and Extra Pole)
3W, 4P –– –– ARI-1034 API-1034
150 Amp
Style 2 3W, 4P –– –– ARI-15034 API-15034
(Shell and Extra Pole)

 Pins and sleeves are not sold separately.

472 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 30, 60, 100, and 150 Amp Replacement Parts
600 Vac, 250 Vdc, 50-400 Hz

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Description Catalog Number

ACP Plug Clamping Ring — Includes Gasket

30 Amp — 2-, 3- and 4-Pole CLMPR30

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

30 Amp — 3-Wire, 4-Pole 30CRING 
60 Amp — 2- and 3-Pole CLMPR23P60
60 Amp — 4-Pole CLMPR4P60
100 Amp — 2- and 3-Pole CLMPR23P100
100 and 150 Amp ­— 4-Pole CLMPR4P100

Receptacle Spring Cover — Includes Gasket

30 Amp — 2-, 3- and 4-Pole PTSC30
60 Amp — 2- and 3-Pole PTSC60A
60 Amp — 4-Pole PTSC60B
100 Amp — 2- and 3-Pole PTSC100A
100 and 150 Amp — 4-Pole PTSC100B

Receptacle Threaded Cover — Includes Gasket and Chain

30 Amp — 2, 3, and 4-Pole PTTC30
30 Amp — 3 Wire, 4-Pole 30SCAP 
60 Amp — 2- and 3-Pole PTTC60A
60 Amp — 4-Pole PTTC60B
100 Amp — 2- and 3-Pole PTTC100A
100 and 150 Amp — 4-Pole PTTC100B

Bushing Bags and Crown Bushings for Plugs and Cable Connectors
30 Amp PTGB30
60 Amp PTGB60
100 Amp and 150 Amp (CD) PTGBCD
150 Amp (DE) PTGBDE

Universal Plug Bushing

30 and 60 Amp
Cable Range 0.300” – 9.00” PTGBUBC
Package of 10

Receptacle Ground Lug Kit

30 Amp Receptacle Ground Lug Kit. Wire Well ID 0.272” PTRGL30
60 Amp Receptacle Ground Lug Kit. Wire Well ID 0.312” PTRGL60
100 Amp Receptacle Ground Lug Kit. Wire Well ID 0.389”  PTRGL100

 For use with 30 Amp Powertite™ plugs and WSR/WSRD/JBR/EBR/DBR receptacles.

 Ground lug is cast into the housing after 09/2008.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 473

© January 2024
 Powertite™ 30, 60, 100, and 150 Amp Mounted Receptacle
600 Vac, 250 Vdc, 50-400 Hz

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Dimensions in Millimeters (Inches)

Receptacle Mounted on AEE Box
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Dimensions in Millimeters (Inches)

Amp A B C D E F
30 174.7 (6.88) 89.6 (3.45) 100.3 (3.95) 181.1 (7.13) 107.9 (4.25) 127.0 (5.00)
60 247.6 (9.75) 120.1 (4.73) 126.4 (4.98) 254.0 (10.00) 136.6 (5.38) 162.0 (6.38)

Receptacle Mounted on AJA Box

Dimensions in Millimeters (Inches)

Amp A B C D E F G
60 244.6 (9.63) 203.2 (8.00) 223.7 (8.81) 271.5 (10.69) 123.9 (4.88) 174.7 (6.88) 200.15 (7.88)
100 and 150 290.5 (11.44) 228.6 (9.00) 233.4 (9.19) 300.2 (11.82) 123.9 (4.88) 174.7 (6.88) 200.15 (7.88)

ADR Receptacle

Dimensions in Millimeters (Inches)

Amp No. Poles A B C D E F
30 2,3,4 71.1 (2.80) 81.0 (3.19) 85.8 (3.38) 69.0 (2.72) 52.3 (2.06) 69.8 (2.75)
60 2,3 123.9 (4.88) 117.6 (4.63) 107.9 (4.25) 88.9 (3.50) 58.6 (2.31) 78.7 (3.10)
60 4 123.9 (4.88) 117.6 (4.63) 107.9 (4.25) 88.9 (3.50) 61.9 (2.44) 85.0 (3.35)
100 2,3 129.5 (5.10) 139.7 (5.50) 107.9 (4.25) 88.9 (3.50) 61.9 (2.44) 86.3 (3.40)
100 and 150 4 129.5 (5.10) 139.7 (5.50) 107.9 (4.25) 88.9 (3.50) 65.0 (2.56) 91.4 (3.60)

474 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 30, 60, 100, and 150 Amp Connector and Plug
600 Vac, 250 Vdc, 50-400 Hz

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Dimensions in Millimeters (Inches)

ARC Cable Connector

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Dimensions in Millimeters (Inches)
Amp A B
30 266.7 (10.50) 79.5 (3.13)
60 336.5 (13.25) 96.7 (3.81)
100 406.4 (16.00) 107.9 (4.25)
150 406.4 (16.00) 107.9 (4.25)

ACP Plug

Dimensions in Millimeters (Inches)

Amp No. Poles A B C D
30 2,3,4 152.4 (6.00) 120.6 (4.75) 79.5 (3.13) 47.2 (1.86)
60 2,3 198.3 (7.81) 125.4 (4.94) 88.9 (3.50) 56.6 (2.23)
60 4 198.3 (7.81) 125.4 (4.94) 96.7 (3.81) 64.7 (2.55)
100 2,3 266.7 (10.50) 168.4 (6.63) 101.6 (4.00) 62.7 (2.47)
100 4 266.7 (10.50) 168.4 (6.63) 107.9 (4.25) 69.0 (2.72)
150 (CD) 4 266.7 (10.50) 168.4 (6.63) 107.9 (4.25) 69.0 (2.72)
150 (DE) 4 340.3 (13.40) 247.1 (9.73) 107.9 (4.25) 69.0 (2.72)

NMACP Plug
A
C

ØD
ØB

Dimensions in Millimeters (Inches)

D
Amp No. Poles A B C Min — Max
30 4 187.0 (7.36) 63.0 (2.48) 145.0 (5.71) 11.0 - 24.5 (0.43 - 0.97)
60 4 245.0 (9.65) 100.0 (3.94) 174.0 (6.85) 14.5 - 36.0 (0.57 - 1.42)

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 475

© January 2024
 Powertite™ 30, 60, 100, and 150 Amp Mounting Box
600 Vac, 250 Vdc, 50-400 Hz

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Dimensions in Millimeters (Inches)

AJA Mounting Boxes
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Dimensions in Millimeters (Inches)

Amp Hub Size (Inches) A B C
1 28.7 (1.13) 14.2 (0.56) 203.2 (8.0)
60, 100 1-1/4 28.7 (1.13) 14.2 (0.56) 203.2 (8.0)
and
150 1-1/2 38.1 (1.50) 14.2 (0.56) 203.2 (8.0)
2 38.1 (1.50) 14.2 (0.56) 203.2 (8.0)

AJA100 Angle Adapter

11/32” holes for 5/16” bolt

5/16-18 threaded holes

Dimensions in Millimeters (Inches)

A B C D E F
149.0 (5.87) 131.5 (5.18) 149.0 (5.87) 131.5 (5.18) 88.9 (3.50) 122.1 (4.81)

 AJA has two hubs. Close-up plug furnished in bottom recessed hub.

476 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 30, 60, 100, and 150 Amp Mounting Box
600 Vac, 250 Vdc, 50-400 Hz

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Dimensions in Millimeters (Inches)

AERA , AERC  and AERH Mounting Boxes

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Hub Size Dimensions in Millimeters (Inches)
Amp (Inches) A B C D E F G H J
30 1/2 17.5 (0.69) 134.8 (5.31) 85.8 (3.38) 85.8 (3.38) 63.5 (2.50) 66.8 (2.63) 115.8 (4.56) 69.0 (2.72) 23.8 (0.94)
30 3/4 19.0 (0.75) 134.8 (5.31) 85.8 (3.38) 85.8 (3.38) 63.5 (2.50) 66.8 (2.63) 115.8 (4.56) 69.0 (2.72) 23.8 (0.94)
30 1 20.5 (0.81) 134.8 (5.31) 85.8 (3.38) 85.8 (3.38) 63.5 (2.50) 66.8 (2.63) 115.8 (4.56) 69.0 (2.72) 23.8 (0.94)
60 1 20.5 (0.81) 165.1 (6.50) 107.9 (4.25) 107.9 (4.25) 79.5 (3.13) 88.9 (3.50) 149.3 (5.88) 88.9 (3.50) 35.0 (1.38)
60 1-1/4 23.8 (0.94) 165.1 (6.50) 107.9 (4.25) 107.9 (4.25) 79.5 (3.13) 88.9 (3.50) 149.3 (5.88) 88.9 (3.50) 35.0 (1.38)
60 1-1/2 25.4 (1.00) 165.1 (6.50) 107.9 (4.25) 107.9 (4.25) 79.5 (3.13) 88.9 (3.50) 149.3 (5.88) 88.9 (3.50) 35.0 (1.38)

AEE Mounting Box

Dimensions in Millimeters (Inches)

Amp Hub Size (Inches) A B C D E F G
30 1/2, 3/4, 1 104.6 (4.12) 127.0 (5.00) 84.5 (3.33) 107.9 (4.25) 85.8 (3.38) 29.9 (1.18) 27.9 (1.10)
60 1, 1-1/4, 1-1/2 137.4 (5.41) 162.0 (6.38) 107.4 (4.23) 136.6 (5.38) 107.9 (4.25) 38.1 (1.50) 38.1 (1.50)

 Dimension ”A” for AERA only.

 Dimension ”B” for AERC only.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 477

© January 2024
 Powertite™ 200 Amp Pin and Sleeve Plugs and Receptacles
600 Vac, 250 Vdc, 50-400 Hz. Spring Door Cover. Wire Recess Diameter: .687”. Wire Size Range: 250 MCM-#1/0. Pressure Wire Terminals .

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Grounding Receptacle with AJA Hub Size Receptacle Plug Cable Dia.
Style Wire/Pole Mounting Box  (Inches) Only  Only (Inches)
ADJA20033-150 1-1/2
3W, 3P ADJA20033-200 2 ADR20033 AP20033E .875 to 2.500
Style 1
ADJA20033-250 2-1/2
(Shell Only)
ADJA20044-200 2
4W, 4P ADR20044 AP20044E .875 to 2.500
ADJA20044-250 2-1/2
ADJA20023-150 1-1/2
2W, 3P ADJA20023-200 2 ADR20023 AP20023E .875 to 2.500
Style 2 ADJA20023-250 2-1/2
(Shell and
Extra Pole) ADJA20034-150 1-1/2
3W, 4P ADJA20034-200 2 ADR20034 AP20034E .875 to 2.500
ADJA20034-250 2-1/2
For Reverse Service add suffix -RS to Catalog Number.
For Special Polarization, add suffix -P4 to Catalog Number.

Maximum Conductor Size

Wire Recess Dia. (Inches) Conductor Size Max. Strand Type Conductor
250 MCM 37 General Wire
4/0 19 General Wire
4/0 516 Flexible Cable
0.687
3/0 427 Extra Flexible Cable
2/0 259 Flexible Cable
1/0 259 Flexible Cable

Horsepower Ratings at Full-Load Current

Below values are derived from NEC article 430 Table 430.250. The voltages listed are nominal motor voltages.

Motor Horsepower
Motor Phase 240 Vac 480 Vac 600 Vac
3-Phase 75HP 150HP 200HP

Horsepower Ratings for Emergency Disconnect Under Load

Plug may be withdrawn in an emergency if within these maximum HP ratings. Not for normal starting and stopping.

Motor Horsepower
Motor Phase 120 Vac 240 Vac 480 Vac 600 Vac
1-Phase 15HP 30HP 40HP 40HP
3-Phase 20HP 40HP 50HP 50HP

 Adapters for #4-#1 wire available, see Powertite™ 200 and 400 Amp Replacement Parts.
 For additional mounting boxes, see Aluminum Mounting Boxes.
 Receptacle meets NEMA 3, 4, 4X with plug fully inserted and wing nuts fully tightened or spring door installed with wing nuts fully tightened.

478 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 200 Amp Pin and Sleeve Plugs, Connectors and Receptacles
600 Vac, 250 Vdc, 50-400 Hz. Clamp Cover. Wire Recess Diameter: .687”. Wire Size Range: 250 MCM-#1/0. Pressure Wire Terminals .

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Grounding Receptacle with AJA Hub Size Receptacle Connector Cable Dia.
Style Wire/Pole Mounting Box  (Inches) Only  Body Only  Plug Only  (Inches)
AJA20033-150 1-1/2
3W, 3P AJA20033-200 2 AR20033 ARC20033E AP20033E .875 to 2.500
Style 1
AJA20033-250 2-1/2
(Shell Only)
AJA20044-200 2
4W, 4P AR20044 ARC20044E AP20044E .875 to 2.500
AJA20044-250 2-1/2
AJA20023-150 1-1/2
2W, 3P AJA20023-200 2 AR20023 ARC20023E AP20023E .875 to 2.500
Style 2 AJA20023-250 2-1/2
(Shell and
Extra Pole) AJA20034-150 1-1/2
3W, 4P AJA20034-200 2 AR20034 AP20034E .875 to 2.500
ARC20034E
AJA20034-250 2-1/2
For Reverse Service add suffix -RS to Catalog Number.
For Special Polarization, add suffix -P4 to Catalog Number.

Pin and Sleeve Design

Copperfree aluminum housing with epoxy powder coat

finish

Energized contacts deeply recessed to reduce danger of Widely spaced contacts Nested Allen slots allow the terminals to be
accidental touching and minimize possibility of exposed arcs. for extra safety wired and fastened without disassembly.

Neoprene bushing seals Ground Strap Molded in bushings Reversible cable clamp accommodates
out water and dust (used in Style 2) secure plug terminal CD & E cable sizes. Provides strain relief
block in place at conductor connections.

 Note: Adapters for #4-#1 wire available, see Powertite™ 200 and 400 Amp Replacement Parts.
 For additional mounting boxes, see Aluminum Mounting Boxes.
 Receptacle meets NEMA 3, 4, 4X with plug fully inserted and wing nuts fully tightened or clamp cover installed with wing nuts fully tightened.
 Plug and connector body combination is NEMA 4X rated when wing nuts are fully tightened on connector body.
Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 479
© January 2024
 Powertite™ 400 Amp Pin and Sleeve Plugs and Receptacles
Weatherproof
600 Vac, 250 Vdc, 50-400 Hz. Clamp Cover. Wire Recess Diameter: .84” or 1.25”. Wire Size Range: 400MCM—1000MCM. Solder Wire Terminals.

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 4 —Optional
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Wire Recess Grounding Receptacle with AJA Hub Size Cable Dia.
Dia. (Inches) Style Wire/Pole Mounting Box  (Inches)  Receptacle Only  Plug Only (Inches)
3W, 3P AJA40033-400 AR40033 AP40033E 1.875 to 2.500
Style 1
4W, 4P AJA40044-400 4 AR40044 AP40044E 1.875 to 2.500
(Shell Only)
4W, 4P AJA40044-400N4 AR40044N4 AP40044E 1.875 to 2.500
0.84 
2W, 3P AJA40023-400 AR40023 AP40023E 1.875 to 2.500
Style 2 (Shell and
3W, 4P AJA40034-400 4 AR40034 AP40034E 1.875 to 2.500
Extra Pole)
3W, 4P AJA40034-400N4 AR40034N4 AP40034E 1.875 to 2.500
AP40133F 2.500 to 3.000
3W, 3P AJA40133-400 4 AR40133
AP40133G 3.000 to 3.500
Style 1
AP40144F 2.500 to 3.000
(Shell Only) 4W, 4P AJA40144-400 4 AR40144
AP40144G 3.000 to 3.500
4W, 4P AJA40144-400N4 4 AR40144N4 AP40144G 3.000 to 3.500
1.25
AP40123F 2.500 to 3.000
2W, 3P AJA40123-400 4 AR40123
AP40123G 3.000 to 3.500
Style 2 (Shell and
AP40134F 2.500 to 3.000
Extra Pole) 3W, 4P AJA40134-400 4 AR40134
AP40134G 3.000 to 3.500
3W, 4P AJA40134-400N4 4 AR40134N4 AP40134G 3.000 to 3.500
Solder wire terminals standard on all models.
For Reverse Service add suffix -RS to Catalog Number.
For Special Polarization add suffix -P4 to Catalog Number.
Note: Box can be turned for vertical or horizontal mounting.

Maximum Conductor Size

400 Amp not horsepower rated. Plug is for disconnecting use only ­— not for current rupturing.

Solder Recess
Dia. (Inches) Conductor Size Max. Strand Type Conductor
500 MCM 37 General Wire
0.84 400 MCM 259 Flexible Cable
400 MCM 427 Extra Flexible Cable
1000 MCM 61 General Wire
1.25 900 MCM 427 Flexible Cable
800 MCM 703 Extra Flexible Cable

 Pressure terminal kits available for .84 wire recess size only to convert solder terminal to pressure terminal. See Replacement Parts page.
 400 Amp versions with the -N4 suffix are NEMA 4 rated.
 Has feed-thru 4” tapped openings. Supplied with one 4” to 3” reducer and one 4” close-up plug.

480 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 400 Amp Pin and Sleeve Connectors and Plugs
Weatherproof
600 Vac, 250 Vdc, 50-400 Hz. Wire Recess Diameter: .84” or 1.25”. Wire Size Range: 400MCM—1000MCM. Solder Wire Terminals.

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 4 —Optional

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Wire Recess Dia. (Inches) Grounding Style Wire/Pole Connector Body Only Plug Only Cable Dia. (Inches)

Style 1 3W, 3P ARC40033E AP40033E 1.875 to 2.500

(Shell Only) 4W, 4P ARC40044E AP40044E 1.875 to 2.500
0.84 
Style 2 2W, 3P ARC40023E AP40023E 1.875 to 2.500
(Shell and Extra Pole) 3W, 4P ARC40034E AP40034E 1.875 to 2.500
ARC40133F AP40133F 2.500 to 3.000
3W, 3P
Style 1 ARC40133G AP40133G 3.000 to 3.500
(Shell Only) ARC40144F AP40144F 2.500 to 3.000
4W, 4P
ARC40144G AP40144G 3.000 to 3.500
1.25
ARC40123F AP40123F 2.500 to 3.000
2W, 3P
Style 2 ARC40123G AP40123G 3.000 to 3.500
(Shell and Extra Pole) ARC40134F AP40134F 2.500 to 3.000
3W, 4P
ARC40134G AP40134G 3.000 to 3.500
Solder wire terminals standard on all models.
For Reverse Service add suffix -RS to Catalog Number.
For Special Polarization add suffix -P4 to Catalog Number.

Pin and Sleeve Design

Energized contacts deeply recessed to reduce danger of Plug mechanical cable clamps provide strain relief at conductor
accidental touching, minimize possibility of exposed arcs. Insulator connections, allow easy cable replacement.
quenches arcing, and is resistant to abnormal heat and to fire.

 Pressure terminal kits available for .84 wire recess size only to convert solder terminal to pressure terminal. See Replacement Parts page.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 481

© January 2024
 Powertite™ 200 and 400 Amp Pin and Sleeve Connectors and Plugs
Mounting Boxes and Replacement Interiors. 600 Vac, 250 Vdc, 50-400 Hz.

NEC/CEC — 200 Amp: NEC/CEC — 400 Amp:

Listed for Ordinary (Unclassified) Locations Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X NEMA 4 —Optional

200 Amp Mounting Boxes and Angle Adapter

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Hub Size AJA200

(Inches) AJB AJA (Angle Adapter Only)
1-1/2 NPT –– AJA520 AJA200
2 NPT AJB620 AJA620 AJA200
2-1/2 NPT –– AJA720 AJA200
2-3/8 (Slip Hole) AJB238 –– ––
400 Amp Mounting Box and Angle Adapter

Hub Size AJA400

(Inches) AJAC  (Angle Adapter Only)
4 AJAC400 AJA400

200 Amp Interiors 

Grounding Style Wire/Pole Receptacle Plug Receptacle Plug

Style 1 3W, 3P ARI20033-B API20033-B –– ––
(Shell Only) 4W, 4P ARI20044-B API20044-B –– ––
Style 2 (Shell and 2W, 3P –– –– ARI20023-B API20023-B
Extra Pole) 3W, 4P –– –– ARI20034-B API20034-B

400 Amp Interiors 

Wire Recess Grounding

Dia. (Inches) Style Wire/Pole Receptacle Plug Receptacle Plug
Style 1 3W, 3P ARI40033 API40033 –– ––
(Shell Only) 4W, 4P ARI40044 API40044 –– ––
.84
Style 2 (Shell and 2W, 3P –– –– ARI40023 API40023
Extra Pole) 3W, 4P –– –– ARI40034 API40034
Style 1 3W, 3P ARI40133 API40133 –– ––
(Shell Only) 4W, 4P ARI40144 API40144 –– ––
1.25
Style 2 (Shell and 2W, 3P –– –– ARI40123 API40123
Extra Pole) 3W, 4P –– –– ARI40134 API40134

 Has feed-thru 4” tapped openings. Supplied with one 4” to 3” reducer and one 4” close-up plug.
 200 Amp replacement interiors ending with -B correspond to Model B version and those without -B correspond to original version. Model B Interiors ARE NOT
backwards compatible with original version.
 Pins and sleeves are not sold separately.

482 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 200 and 400 Amp Replacement Parts
600 Vac, 250 Vdc, 50-400 Hz.

NEC/CEC — 200 Amp: NEC/CEC — 400 Amp:

Listed for Ordinary (Unclassified) Locations Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X NEMA 4 —Optional

Description Catalog Number

Receptacle Covers
Spring Cover — Includes Gasket

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

200 Amp — 2- and 3-Pole PTLC200A

200 Amp — 4-Pole PTLC200B

Clamping Cover — Includes Gasket and Chain

200 Amp — 2- and 3-Pole PTBC200A

200 Amp — 4-Pole PTBC200B

400 Amp — 2- and 3-Pole PTBC400A

400 Amp — 4-Pole PTBC400B

Bushing Bags for Plugs and Cable Connectors

200 Amp - Suffix E PTGB200E

400 Amp - Suffix E PTGB400E
400 Amp - Suffix F PTGB400F
400 Amp - Suffix G PTGB400G

Receptacle Lockout Device

Lockout, 200 Amp 3- and 4-Pole Models PTLOCK2004
Lockout, 400 Amp 4-Pole Models PTLOCK4004

Optional Accessory for Wire Size #1 to #4

Check National Electrical Code for proper wire size and application.

200 Amp, 3-Pole Wire Adapter Kit PTK200WA3

200 Amp, 4-Pole Wire Adapter Kit PTK200WA4

400 Amp Pressure Terminal Kits

Use with 400-500 MCM Wire 
0.84” I.D. Wire Recess
3 Adapters PTK84-3P

4 Adapters PTK84-4P
Use With 750 MCM General Wire or 500-777 MCM Flexible Wire
1.18” I.D. Wire Recess
3 Adapters PTK750-3P

4 Adapters PTK750-4P

 PTK84 pressure terminal kits for use with 400-500 MCM wire are NOT UL listed.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 483

© January 2024
 Powertite™ 200 and 400 Amp Replacement Parts
600 Vac, 250 Vdc, 50-400 Hz.

NEC/CEC — 200 Amp: NEC/CEC — 400 Amp:

Listed for Ordinary (Unclassified) Locations Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X NEMA 4 —Optional

Description Catalog Number

NEMA 4X Plug Dust Cap
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Double sided plug dust cap for 3- and 4-Pole Models to

keep plugs free of debris, moisture, and corrosion when ACPCAP200
not in use.

Plug Lockout Lanyard (Lockout Hasp Not Included)

Adjustable lanyard with a lockout plate for padlocking

devices. Used in conjunction with lockout slot on the plug
PLGL0CK200
sleeve provides an easy access lockout/tagout point to
comply with OSHA 1910.147 standard.

484 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 200 Amp Mounted Receptacle
600 Vac, 250 Vdc, 50-400 Hz.

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Dimensions in Millimeters (Inches)

Receptacle Mounted on AJA and AJAC Boxes

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Dimensions in Millimeters (Inches)
A B C D E F G H J K
203.2 (8.00) 273.0 (10.75) 171.4 (6.75) 241.3 (9.50) 355.6 (14.00) 387.3 (15.25) 95.2 (3.75) 47.7 (1.88) 342.9 (13.50) 361.9 (14.25)

Receptacle

Dimensions in Millimeters (Inches)

No. Poles A B C D E F G H
3 82.5 (3.25) 143.0 (5.63) 10.46 (4.19) 203.2 (8.00) 168.4 (6.63) 166.6 (6.56) 170.1 (6.70) 179.0 (7.05)
4 92.2 (3.63) 143.0 (5.63) 115.8 (4.56) 203.2 (8.00) 168.4 (6.63) 166.6 (6.56) 170.1 (6.70) 179.0 (7.05)

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 485

© January 2024
 Powertite™ 200 Amp Connector, Plug and Adapter
600 Vac, 250 Vdc, 50-400 Hz.

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 3, 4, 4X

Dimensions in Millimeters (Inches)

Connector Body
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Dimensions in Millimeters (Inches)

No. Poles A B C
3 330.2 (13.00) 106.4 (4.19) 136.6 (5.38)
4 330.2 (13.00) 115.8 (4.56) 146.0 (5.75)

Plug

Dimensions in Millimeters (Inches)

No. Poles A B C D E
3 327.7 (12.9) 223.5 (8.8) 96.5 (3.8) 96.5 (3.8) 162.6 (6.4)
4 327.7 (12.9) 223.5 (8.8) 106.7 (4.2) 104.1 (4.1) 172.7 (6.8)

AJA200 Angle Adapter

Dimensions in Millimeters (Inches)

A B C D E
203.2 (8.0) 177.8 (7.0) 203.2 (8.0) 177.8 (7.0) 152.4 (6.0)

486 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024
Powertite™ 400 Amp Mounted Receptacle and Receptacle
600 Vac, 250 Vdc, 50-400 Hz.

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 4 —Optional

Dimensions in Millimeters (Inches)

Receptacle Mounted on AJAC Box

PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Dimensions in Millimeters (Inches)
Hub Size  A B C D E F G H
4.00/10.16 403.3 (15.88) 403.3 (15.88) 165.1 (6.50) 384.3 (15.13) 558.8 (22.00) 615.9 (24.25) 215.9 (8.50) 98.5 (3.88)

Receptacle

Dimensions in Millimeters (Inches)

No. Poles A B C D E F
3 285.7 (11.25) 311.1 (12.25) 130.3 (5.13) 171.4 (6.75) 196.8 (7.75) 106.4 (4.19)
4 285.7 (11.25) 311.1 (12.25) 143.0 (5.63) 171.4 (6.75) 196.8 (7.75) 119.1 (4.69)

 AJAC box has feed-thru 101.6 mm (4”) openings. Supplied with one 101.6 mm (4”) to 76.2 mm (3”) reducer, and one 101.6 mm (4”) close-up plug.

Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54. 487

© January 2024
 Powertite™ 400 Amp Connector and Plug
600 Vac, 250 Vdc, 50-400 Hz.

NEC/CEC:
Listed for Ordinary (Unclassified) Locations
NEMA 4 —Optional

Dimensions in Millimeters (Inches)

Plug
PLUGS AND RECEPTACLES: NEC/CEC ORDINARY LOCATION

Dimensions in Millimeters (Inches)

No. Poles A B C D E F
3 381.0 (15.00) 482.6 (19.00) 285.7 (11.25) 119.3 (4.70) 118.3 (4.66) 190.5 (7.50)
4 393.7 (15.50) 482.6 (19.00) 285.7 (11.25) 131.8 (5.19) 131.0 (5.16) 203.2 (8.00)

Connector Body

Dimensions in Millimeters (Inches)

No. Poles A B C
3 482.6 (19.00) 130.3 (5.13) 184.1 (7.25)
4 482.6 (19.00) 143.0 (5.63) 196.8 (7.75)

488 Visit our website at www.appletonelec.com or contact us at (800) 621-1506 or +33.3.22.54.27.54.

© January 2024