AIRBUS

PROCESS AND MATERIAL SPECIFICATION

02-12-00

Technical Note (TN)

Thermoplastic materials

The content of this document is the property of Airbus. It is supplied in confidence and commercial security on its contents must
be maintained. It must not be used for any purpose other than that for which it is supplied, nor may information contained in it be
disclosed to unauthorized persons. It must not be reproduced in whole or in part without permission in writing from the owners of
the copyright.
© AIRBUS 2022. All rights reserved.

A00710058 PMS Ref: 02-12-00

Issue: P Rev: AUG 01/22
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION

AIRBUS TN A.007.10058
Issue P
Page 1 of 64
___________________________________________________________________________________________

Technical Note (TN)

Thermoplastic materials

The content of this document is the property of Airbus.

It is supplied in confidence and commercial security
of its contents must be maintained.
It must neither be used for any purpose other than that for which it is
supplied, nor may any information contained in it be disclosed to any
unauthorized person.
It must not be reproduced in whole or in part without written permission
from the owners of the copyright.

__________________________________________________________________________________________________________________
¤Copyright AIRBUS S.A.S. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 1 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 2 of 64

List of Revisions
Issue Date Pages Description

A all New document

B 1 – 15; 20
1–3
C
8 – 13; 20
1–3
D
8 – 16; 20
1 – 16
E
18 – 20
1 – 16;
F
19; 20
1; 2
5–8
G
10 – 16;
19; 20
1; 2;
H 12/1990
7 – 17
I 04/09 all Complete revision
Column PQ code has been separated into two columns PQ drawing code and
all specific code

Polycarbonate, colored:
Lexan 2010 can be used for new design

Low heat release thermoplastic material:

Ultem 9070 AIMS04-01-001 has been added
Ultem 9075 AIMS04-01-001 has been added
Ultem 9076 AIMS04-01-001 has been added
Ultem 9070 new IPS04-01-001-0x has been added
Ultem 9075 new IPS04-01-001-0x has been added
Ultem 9076 new IPS04-01-001-0x has been added

Polyetherimide with glass fibers:

J 10/09 Ultem 2210 ASNB80601 has been added
Ultem 2300 ASNB80601 has been added
Table 1 Ultem 2310 ASNB80601 has been added

Polyaryletherketone with 55 % by volume glass fibers (continuous

reinforcement):
Couple product/manufacturer no longer qualified

Polyamide-Imide:
Torlon 4301 according to ASNA0201 is cancelled; cannot be used for Airbus
aircrafts; ASNA0201 is an Eurocopter standard

Polyamide 610 with 50 % by weight glass fibers:

Thermocomp QF100-10 according to AIMS04-01-010 has been added

__________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 2 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 3 of 64

List of Revisions
Polyamide 12:
Standard ASNA3527 for Ertalon 12 has been added

Acrylic standard quality:

ASNA3534 not for new design.
The couple Altuglas M70/Atohaas no longer available.
Change of specifications – pr EN4634, pr EN4635 were changed into pr EN4366
Altuglas 124-10000 no longer available.

Acrylic sheets for glazings :

Change of specification – pr EN4636 was changed into pr EN4366
Table 2
Stretched acrylic quality:
J 10/09 Old material descriptions were stretched acrylic internal cabin window and side
window cockpit. Both description were put it together to one description.

Shock resistant, corrosion resistant and UV resistant acrylic copolymer:

Plexidur no longer available.

Polytetrafluoroethylene with 5 % by weight glass fibers:

DAN1228 not for new design

Table 3
Table 4 Editorial revised
Table 5
Specification MIL-PRF-8184, Type I, Class 2 added to material Plexiglas GS249
(PQ10058-202-00) Æ
Table 2, line
Change of Remarks:
18 &
New remark:
K 10/10 Table 5,
unstrechted material, improved moisture resistance
PQ10058-
Cancellation of remark:
202-00
class 0 no as good as class 2
Change of tradename Plexiglas GS249 class 0 into Plexiglas GS249

L 05/12 all Complete revison

__________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 3 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 4 of 64

List of Revisions
Editorial revised: New columns have been added

ABR6-0122 Change of remarks:

Not for new design

GRILON BSV0 Change of remarks:

Formerly GRILON A28V0

PA66-GF35:
WL5.2206 not for new design, use AIMS04-01-016
GRILON AG35 has been added

Table 1 Polycarbonate, flame retardant, transparent:

DAN198, DAN1103, DAN1133 replaced by AIMS04-01-002
MAKROLON acc. to AIMS04-01-002 has been added

PEI-GF40:
ULTEM 2400 has been added

PAEK-CF40:
M 12/13
VICTREX PEEK 90HMF40 has been added

PA12-FR:
Rau-Flight PA has been added

Editorial revised: New columns have been added

Low heat release thermoplastic material:

LEXAN XHR 6000 has been added
Table 2
Polyamideimide / Polyamideimide wear resistance:
TORLON 4203 has been added
TORLON 4301 has been added

Editorial revised: New columns have been added

Polyamideimide / Polyamideimide wear resistance: TORLON 4203 has been

Table 3
added
TORLON 4301 has been added

All Complete revision in order update all information on standards

PC-FR, transparent: Lexan CFR 5630 added
POM: Delrin 900P added
Table 1
PA66: Zytel 101L added
PA66-GF35: Akroloy PA K17 FR added
Mirror material: DIBOND Mirror added
Table 2
N 04/18 Harmonized PA standards implemented (ABS593x)

Table 3 Harmonized PA standards implemented (ABS593x)

__________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 4 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 5 of 64

List of Revisions
PC-FR: Lexan CFR5630 (D) acc. to DAN198 added

PA12: F 12s thickness for Vestamid X7167 corrected

Table 1 PEEK: KetaSpire KT-820 NT added

O 01/19 PEEK-CF30: KetaSpire KT-880 CF30 added

PMMA: Plexiglas Resist AG100 added

Table2 PC: Lexan ULG1003 added

Table 3 PTFE-GF15: FL103 added

1.1 Clarification w.r.t FST testing added

Grilon BS V0 acc. to AIMS04-01-031 added

ZYTEL FR70G25HSL added

Table 1 Thicknesses for F12 corrected

ULTRAMID A3X2G7 added

Remark “Not for new design, only for ABS0304” added to PEBAX 3533

Lexan XHR2000A added

Lexan FR60 added

P 03/20
Tecamid 6 added
Table 2
F12 and F60 thicknesses corrected

Remark “No longer available added to Lexan XHR6000

Boltaron 6500 & 6800 Manufacturer changed from Empire Plastics to Boltaron

Tecamid 6 added

Table 3 Tecapeek-GF30 added

FST information for MEPLA tubes updated

Table 5 F12 and F60 thicknesses corrected

__________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 5 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 6 of 64

1 Instruction
1.1 Scope
This Technical Note (TN) lists all qualified thermoplastic materials for use within Airbus aircraft.

All products listed herein have been qualified under the requirements for the product as specified in the latest
effective issue of the applicable standard.

Properties for flammability, smoke density, smoke toxicity and heat release are only guidance
values not to be used for part certification. A reference to herein defined fire safety properties
does not release from the necessity of part/component related FST tests.

1.2 Application
This Technical Note (TN) shall be used in conjunction with the Process and Material Specification (PMS) to assist
Airlines, which produce their own process instructions for performing work on in-service Airbus aircraft.

1.3 Specifics
Following thermoplastic materials/semi-finished products are listed, which are used in an aircraft. Please be careful
Not all listed materials/semi-finished products fulfill the requirements of the ABD0031.

This document includes following thermoplastics:

x Acrylics
x Acrylnitrile-Butadien-Styrol
x Perfluoroalkoxy
x Polyacetal
x Polyamide
x Polyamide-imide
x Polyaryletherketone
x Polycarbonate
x Polyester
x Polyetherimide
x Polyethylene
x Polypropylene
x Polysulfone
x Polytetraflouroethylene
x Polyurthane
x Polyvinylchloride
x Thermoplastic elastomerics

Following Airbus Process Specifications are connected with the listed materials:

AIPS03-02-008 Thermoforming of thermoplastic sheet materials

AIPS03-02-010 The manufacture of thermoplastic material parts by the injection molding process

__________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 6 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 7 of 64
1.4 Definition of the columns of the tables

Line No. Identification number of lines.

Material Brief description of the material concerned.

Standard Defines the corresponding semi-finished Product Standard (e.g. ABS) or Material
Specification (e.g. AIMS).

The semi-finished Product Standard specifies general requirements for a semi-finished

product for procurement / delivery as e.g. dimensions, tolerances, mass, surface structure,
colour.

The Material Specification defines all requirements for qualification and release testing for
a material.

Product designation Defines the trade name of the product.

Manufacturer Company who produces the qualified product or controls the manufacturing of the qualified
product.

Individual product The Individual Product Specification identifies a material from a manufacturer
specification that has been successfully qualified to the relevant Material Specification.

The Individual Product Specification specifies individual requirements, which describe the
specific performance of the material, as demonstrated by the qualification, and which have
to be considered for procurement and use, together with the Material Specification.

PQ-code Reference code of products and is use on drawings prepared by Airbus France.

PQ-codes ending with 00 are drawing codes and linked with specific standards.

PQ-codes ending with XX are linked with a specific product.

Remarks Any additional information. For example:

Not for new design; use “…”

No longer to be used; use “…”

No longer available; use “…”

Former product designation: “…”

To be used for “….” only.

__________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 7 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 8 of 64
F horiz Flammability according to ABD0031, para 7.1.3

F 12 s Flammability according to ABD0031, para 7.1.2

F 60 s Flammability according to ABD0031, para 7.1.1

S Optical smoke density of component parts or sub-assemblies of the aircraft interior

according to ABD0031, para 7.3.1

T Toxicity according to ABD0031, para 7.4

HR Heat release according to ABD0031, para 7.2

Note:
Values in the brackets give the minimum thickness for flammability, vertical 12 s as well as vertical 60 s.

1.5 List of tables

Table 1: Granules

Table 2: Sheet

Table 3: Rods

Table 4: Others

Table 5: Sorted by PQ-numbers

__________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 8 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 9 of 64

Table 1: Granules
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Solvay
Low heat release AIMS04-01- AIMS04-01- Yes
1 AIMS04-01-001 ACUDEL 79000 Speciality IPS04-01-001-02 Only for extrusion - - Yes Yes Yes
thermoplastic material 001 001 (2,0)
Polymers

Solvay
Low heat release AIMS04-01- AIMS04-01- Only for injection Yes
2 AIMS04-01-001 RADEL R-7159 Speciality IPS04-01-001-02 - - Yes Yes Yes
thermoplastic material 001 001 molding (2,0)
Polymers

Solvay
Low heat release AIMS04-01- AIMS04-01- AIMS04-01-001- Yes
3 AIMS04-01-001 RADEL R-7300 Speciality Not deliverable - - Yes Yes Yes
thermoplastic material 001 001 02 (2,0)
Polymers

Solvay
Low heat release AIMS04-01- AIMS04-01- AIMS04-01-001- Yes
4 AIMS04-01-001 RADEL R-7400 Speciality Not deliverable - - Yes Yes Yes
thermoplastic material 001 001 02 (2,0)
Polymers

Sabic
Low heat release AIMS04-01- AIMS04-01- Yes
5 AIMS04-01-001 ULTEM 9070 Innovative IPS04-01-001-03 - - Yes Yes Yes
thermoplastic material 001 001 (2,0)
Plastics

Sabic
Low heat release AIMS04-01- AIMS04-01- Yes
6 AIMS04-01-001 ULTEM 9075 Innovative IPS04-01-001-05 - - Yes Yes Yes
thermoplastic material 001 001 (2,0)
Plastics

Sabic
Low heat release AIMS04-01- AIMS04-01- Yes
7 AIMS04-01-001 ULTEM 9076 Innovative IPS04-01-001-04 - - Yes Yes Yes
thermoplastic material 001 001 (2,0)
Plastics

Sabic
Low heat release AIMS04-01- AIMS04-01- Yes
8 AIMS04-01-001 ULTEM 9085 Innovative IPS04-01-001-06 - - Yes Yes Yes
thermoplastic material 001 001 (2,0)
Plastics

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 9 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 10 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Solvay
Low heat release Not for new design, Yes
9 DAN1291 DAN1291-01 DAN1291-01 RADEL R-7159 Speciality IPSDAN1291-01 - - Yes Yes Yes
thermoplastic material use AIMS04-01-001 (2,0)
Polymers

Solvay Not for new design,

Low heat release Yes
10 DAN1291 DAN1291-01 DAN1291-01 RADEL R-7300 Speciality 75-T-2-3001-2-1 use AIMS04-01-001 - - Yes Yes Yes
thermoplastic material (2,0)
Polymers Not deliverable

Solvay Not for new design,

Low heat release Yes
11 DAN1291 DAN1291-01 DAN1291-01 RADEL R-7300 Speciality 75-T-2-3001-2-1 use AIMS04-01-001 - - Yes Yes Yes
thermoplastic material (2,0)
Polymers Not deliverable

Solvay Not for new design,

Low heat release Yes
12 DAN1291 DAN1291-01 DAN1291-01 RADEL R-7400 Speciality 75-T-2-3001-2-1 use AIMS04-01-001 - - Yes Yes Yes
thermoplastic material (2,0)
Polymers Not deliverable

Solvay Not for new design,

Low heat release Yes
13 DAN1291 DAN1291-01 DAN1291-01 RADEL R-7400 Speciality 75-T-2-3001-2-1 use AIMS04-01-001 - - Yes Yes Yes
thermoplastic material (2,0)
Polymers Not deliverable

Sabic
Low heat release Not for new design, Yes
14 DAN1291 DAN1291-01 DAN1291-01 ULTEM 9070 Innovative 75-T-2-3001-3-1 - - Yes Yes Yes
thermoplastic material use AIMS04-01-001 (2,0)
Plastics

Sabic
Low heat release Not for new design, Yes
15 DAN1291 DAN1291-01 DAN1291-01 ULTEM 9075 Innovative - - Yes Yes Yes
thermoplastic material use AIMS04-01-001 (2,0)
Plastics

Solvay
Low heat release Not for new design, Yes
16 DAN1291 DAN1291-02 DAN1291-02 ACUDEL 79000 Speciality IPSDAN1291-01 - - Yes Yes Yes
thermoplastic material use AIMS04-01-001 (2,0)
Polymers

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 10 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 11 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Solvay Not for new design,

Low heat release Yes
17 DAN1291 DAN1291-02 DAN1291-02 RADEL R-7300 Speciality 75-T-2-3001-2-1 use AIMS04-01-001 - - Yes Yes Yes
thermoplastic material (2,0)
Polymers Not deliverable

Solvay Not for new design,

Low heat release Yes
18 DAN1291 DAN1291-02 DAN1291-02 RADEL R-7300 Speciality 75-T-2-3001-2-1 use AIMS04-01-001 - - Yes Yes Yes
thermoplastic material (2,0)
Polymers Not deliverable

Solvay Not for new design,

Low heat release Yes
19 DAN1291 DAN1291-02 DAN1291-02 RADEL R-7400 Speciality 75-T-2-3001-2-1 use AIMS04-01-001 - - Yes Yes Yes
thermoplastic material (2,0)
Polymers Not deliverable

Solvay Not for new design,

Low heat release Yes
20 DAN1291 DAN1291-02 DAN1291-02 RADEL R-7400 Speciality 75-T-2-3001-2-1 use AIMS04-01-001 - - Yes Yes Yes
thermoplastic material (2,0)
Polymers Not deliverable

Sabic
Low heat release Not for new design, Yes
21 DAN1291 DAN1291-02 DAN1291-02 ULTEM 9075 Innovative - - Yes Yes Yes
thermoplastic material use AIMS04-01-001 (2,0)
Plastics

Sabic
Low heat release Yes
22 DAN1291 DAN1291-03 DAN1291-03 ULTEM 9075 Innovative Not for new design - - Yes Yes Yes
thermoplastic material (2,0)
Plastics

Sabic
Low heat release PQ10058- Not for new design, Yes
23 ASNB80701 ULTEM 9075 Innovative PQ10058-518-01 - - Yes Yes Yes
thermoplastic material 518-00 use AIMS04-01-001 (2,0)
Plastics

Sabic IPSASNB80701-
Low heat release PQ10058- Not for new design, Yes
24 ASNB80701 ULTEM 9076 Innovative 01 / - - Yes Yes Yes
thermoplastic material 517-00 use AIMS04-01-001 (2,0)
Plastics PQ10058-517-01

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 11 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 12 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polycarbonate with 10 %
MAKROLON PQ10058- Not for new design, Yes
25 by weight glass fibers, ASNA3624 ASNA3624 Covestro PQ10058-167-01 - - Yes Yes No
9415 167-00 use DAN1102 (1,5)
flame retardant

Polycarbonate with 10 % Sabic

Yes
26 by weight glass fibers, DAN1102 DAN1102-1 DAN1102 LEXAN 500R Innovative - - Yes Yes No
(1,5)
flame retardant Plastics

Polycarbonate with 10 %
MAKROLON Yes
27 by weight glass fibers, DAN1102 DAN1102-1 DAN1102 Covestro - - Yes Yes No
9415 (1,5)
flame retardant

Sabic
PQ10058- No longer to be use,
28 Polycarbonate, colored DAN198 DAN198 TH5.575/1 LEXAN 2034 Innovative PQ10058-160-00 - No - No No No
160-00 use AIMS04-01-015
Plastics
Not for new design,
MAKROLON Yes
29 Polycarbonate, colored DAN198 DAN198.1 DAN198.1 Covestro use AIMS04-01-015 - - Yes Yes No
6560 (1,5)
No more availbale
Sabic
CM706 PQ10058- Not for new design,
30 Polycarbonate, colored LEXAN 2014R Innovative PQ10058-161-01 - No - No No No
EN3535 161-00 use AIMS04-01-015
Plastics
PQ10058- Not for new design,
31 Polycarbonate, colored XANTAR F25R DSM PQ10058-520-01 - No - No No No
520-00 use AIMS04-01-015
Sabic
Polycarbonate, flame AIMS04-01- AIMS04-01- Lexan CFR Yes
32 AIMS04-01-015 Innovative IPS04-01-015-03 - - Yes Yes No
retardant, colored 015 015 5630 (1,5)
Plastics
Sabic
Polycarbonate, flame AIMS04-01- AIMS04-01- Yes
33 AIMS04-01-015 LEXAN 940 Innovative IPS04-01-015-01 - - Yes Yes No
retardant, colored 015 015 (1,5)
Plastics
Sabic
Polycarbonate, flame Not for new design, Yes
34 DAN198 DAN198.1 DAN198.1 LEXAN 940 Innovative - - Yes Yes No
retardant, colored use AIMS04-01-015 (1,5)
Plastics

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 12 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 13 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Sabic
Polycarbonate, flame Not for new design, Yes
35 ABR6-0157 ABR6-0157 ABR6-0157 LEXAN 940 Innovative - - Yes Yes No
retardant, colored use AIMS04-01-015 (1,5)
Plastics
Sabic
Polycarbonate, flame AIMS04-01- AIMS04-01- Lexan CFR Clear transparent Yes
36 AIMS04-01-002 Innovative IPS04-01-002-04 - - Yes Yes No
retardant, transparent 002 002 5630D UV-stabilizied (1,5)
Plastics

Polycarbonate, flame AIMS04-01- AIMS04-01- MAKROLON Clear transparent Yes

37 AIMS04-01-002 Covestro IPS04-01-002-03 - - Yes Yes No
retardant, transparent 002 002 6717 UV-stabilizied (1,5)

Polycarbonate, flame MAKROLON Not for new design, Yes

38 DAN1103 DAN1103.1 DAN1103.1 Covestro IPSDAN1103-01 - - Yes Yes No
retardant, transparent 6717 use AIMS04-01-002 (1,5)

Sabic
Polycarbonate, flame Lexan CFR Not for new design, Yes
39 DAN1103 DAN1103.1 DAN1103.1 Innovative IPSDAN1103-03 - - Yes Yes No
retardant, transparent 5630 use AIMS04-01-002 (1,5)
Plastics

Polycarbonate, flame MAKROLON Not for new design, Yes

40 DAN1103 DAN1103.2 DAN1103.2 Covestro IPSDAN1103-01 - - Yes Yes No
retardant, transparent 6717 use AIMS04-01-002 (1,5)

Sabic
Polycarbonate, flame Lexan CFR Not for new design, Yes
41 DAN1103 DAN1103.2 DAN1103.2 Innovative IPSDAN1103-03 - - Yes Yes No
retardant, transparent 5630 use AIMS04-01-002 (1,5)
Plastics
Sabic
Polycarbonate, flame No more qualified, Yes
42 DAN1103 DAN1103-2 DAN1103.2 LEXAN 953A Innovative - - No Yes No
retardant, transparent use AIMS04-01-002 (1,5)
Plastics

Polycarbonate, flame MAKROLON No more availbale, Yes

43 DAN1103 DAN1103-2 DAN1103.2 Covestro - - Yes Yes No
retardant, transparent 6870 use AIMS04-01-002 (1,5)

Sabic
Polycarbonate, flame Lexan CFR Not for new design, Yes
44 DAN1133 DAN1133 DAN1133 Innovative IPSDAN1133-01 - - Yes Yes No
retardant, transparent 5630D use AIMS04-01-002 (1,5)
Plastics
Sabic
Polycarbonate, flame No more qualified, Yes
45 DAN1133 DAN1133 DAN1133 LEXAN 953A Innovative - - No Yes No
retardant, transparent use AIMS04-01-002 (1,5)
Plastics

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 13 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 14 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Sabic
Lexan CFR Not for new design, Yes
46 Polycarbonate, colored DAN198 DAN198 DAN198 Innovative IPS DAN 198-02 - - Yes Yes No
5630 use AIMS04-01-015 (1,5)
Plastics

Sabic
Polycarbonate, flame Lexan CFR Not for new design, Yes
47 DAN198 DAN198 DAN198 Innovative IPS DAN 198-02 - - Yes Yes No
retardant, transparent 5630D use AIMS04-01-002 (1,5)
Plastics

Sabic
Polycarbonate, flame No more qualified, Yes
48 DAN198 DAN198 DAN198 LEXAN 950A Innovative - - No Yes No
retardant, transparent use AIMS04-01-002 (1,5)
Plastics
Sabic
Polycarbonate, flame No more qualified, Yes
49 DAN198 DAN198 DAN198 LEXAN 953A Innovative - - No Yes No
retardant, transparent use AIMS04-01-002 (1,5)
Plastics

Polycarbonate, flame MAKROLON Not for new design, Yes

50 DAN198 DAN198 DAN198 Covestro IPSDAN198-01 - - Yes Yes No
retardant, transparent 6717 use AIMS04-01-002 (1,5)

Polycarbonate, flame MAKROLON No more availbale, Yes

51 DAN198 DAN198 DAN198 Covestro - - Yes Yes No
retardant, transparent 6870 use AIMS04-01-002 (1,5)

Sabic
Polycarbonate, flame No more qualified,
52 DAN198 DAN198.1 DAN198.1 LEXAN 940A Innovative - No - No No No
retardant, transparent use AIMS04-01-002
Plastics
Sabic
Polycarbonate, flame No more qualified, Yes
53 DAN198 DAN198.1 DAN198.1 LEXAN 953A Innovative - - No Yes No
retardant, transparent use AIMS04-01-002 (1,5)
Plastics

Polycarbonate, flame MAKROLON Not for new design, Yes

54 DAN198 DAN198.1 DAN198.1 Covestro IPSDAN198-01 - - Yes Yes No
retardant, transparent 6717 use AIMS04-01-002 (1,5)

Polycarbonate, flame MAKROLON No more availbale, Yes

55 DAN198 DAN198.1 DAN198.1 Covestro - - Yes Yes No
retardant, transparent 6870 use AIMS04-01-002 (1,5)

Sabic
Polycarbonate, flame PQ10058- No more qualified,
56 ASNB80383 ASNB80383 ASNB80383 LEXAN 940A Innovative PQ10058-165-01 - No - No No No
retardant, transparent 165-00 use AIMS04-01-002
Plastics

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 14 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 15 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Sabic
Polycarbonate, flame No more qualified, Yes
57 DAN1103 DAN1103 DAN1103.1 LEXAN 953A Innovative - - No Yes No
retardant, transparent use AIMS04-01-002 (1,5)
Plastics

Polycarbonate, flame MAKROLON No more availbale, Yes

58 DAN1103 DAN1103 DAN1103.1 Covestro - - Yes Yes No
retardant, transparent 6870 use AIMS04-01-002 (1,5)

59 Polyester ABR6-0130 ABR6-0130 ABR6-0130 POCAN B1505 Lanxess Not for new design - No - No No No

Polyester (PBT)-
Sabic
Polycarbonate blend with VALOX 553- PQ10058-
60 Innovative PQ10058-506-01 Not for new design - No - No No No
30 % by weight glass NOIR 7001 506-00
Plastics
fibers

Sabic
AIMS04-01- AIMS04-01- Yes
61 Polyetherimide AIMS04-01-009 ULTEM 1000 Innovative IPS04-01-009-01 - - Yes Yes No
009 009 (1,5)
Plastics
Sabic
AIMS04-01- AIMS04-01- Yes
62 Polyetherimide AIMS04-01-009 ULTEM 1010 Innovative IPS04-01-009-02 - - Yes Yes No
009 009 (1,5)
Plastics
Sabic
AIMS04-01- AIMS04-01- Yes
63 Polyetherimide AIMS04-01-009 ULTEM 1100 Innovative IPS04-01-009-03 - - Yes Yes No
009 009 (1,5)
Plastics
Sabic
AIMS04-01- AIMS04-01- Yes
64 Polyetherimide AIMS04-01-009 ULTEM 1110 Innovative IPS04-01-009-04 - - Yes Yes No
009 009 (1,5)
Plastics
Sabic
AIMS04-01- AIMS04-01- Only for transparent Yes
65 Polyetherimide AIMS04-01-009 ULTEM 1110F Innovative IPS04-01-009-04 - - Yes Yes No
009 009 application (1,5)
Plastics
Sabic
Not for new design, Yes
66 Polyetherimide DAN1209 DAN1209-01 DAN1209-01 ULTEM 1000 Innovative - - Yes Yes No
use AIMS04-01-009 (1,5)
Plastics
Sabic
Not for new design, Yes
67 Polyetherimide DAN1209 DAN1209-01 DAN1209-01 ULTEM 1010 Innovative - - Yes Yes No
use AIMS04-01-009 (1,5)
Plastics
Sabic
Not for new design, Yes
68 Polyetherimide DAN1209 DAN1209-02 DAN1209-02 ULTEM 1100 Innovative - - Yes Yes No
use AIMS04-01-009 (1,5)
Plastics
Sabic
Not for new design, Yes
69 Polyetherimide DAN1209 DAN1209-02 DAN1209-02 ULTEM 1110 Innovative - - Yes Yes No
use AIMS04-01-009 (1,5)
Plastics

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 15 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 16 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Sabic
Not for new design, Yes
70 Polyetherimide DAN1209 DAN1209-03 DAN1209-03 ULTEM 1000 Innovative - - Yes Yes No
use AIMS04-01-009 (1,5)
Plastics
Sabic
Not for new design, Yes
71 Polyetherimide DAN1209 DAN1209-04 DAN1209-04 ULTEM 1100 Innovative - - Yes Yes No
use AIMS04-01-009 (1,5)
Plastics
Sabic
PQ10058- Not for new design, Yes
72 Polyetherimide ASNB80701 ASNB80701 ASNB80701 ULTEM 1000 Innovative PQ10058-507-01 - - Yes Yes No
507-00 use AIMS04-01-009 (1,5)
Plastics
Sabic
PQ10058- Not for new design, Yes
73 Polyetherimide ASNB80701 ASNB80701 ASNB80701 ULTEM 1110F Innovative PQ10058-507-02 - - Yes Yes No
507-00 use AIMS04-01-009 (1,5)
Plastics

Sabic
Polyetherimide with 10 % AIMS04-01- AIMS04-01- Yes
74 AIMS04-01-021 ULTEM 2100 Innovative IPS04-01-021-01 - - Yes Yes No
by weight glass fibers 021 021 (1,5)
Plastics

Sabic
Polyetherimide with 10 % Not for new design, Yes
75 DAN1277 DAN1277 DAN1277-01 ULTEM 2100 Innovative - - Yes Yes No
by weight glass fibers use AIMS04-01-021 (1,5)
Plastics

Sabic IPS04-01-022-01
Polyetherimide with 20 % AIMS04-01- AIMS04-01- PQ10058- Yes
76 AIMS04-01-022 ULTEM 2210 Innovative / Enhanced flow - - Yes Yes No
by weight glass fibers 022 022 513-00 (1,5)
Plastics PQ10058-513-01

Not for new design,

Sabic
Polyetherimide with 20 % PQ10058- use AIMS04-01-022 Yes
77 ASNA4305 ASNA4305 ASNA4305 ULTEM 2210 Innovative PQ10058-513-01 - - Yes Yes No
by weight glass fibers 513-00 No longer to be used (1,5)
Plastics
Enhanced flow

Sabic
Polyetherimide with 25 % AIMS04-01- AIMS04-01- PQ10058- Formerly STATKON
78 AIMS04-01-017 EC005 Innovative PQ10058-509-02 - No - No No No
by weight carbon fibers 017 017 509-00 EC1005
Plastics

Sabic Not for new design,

Polyetherimide with 25 % PQ10058-
79 ASNA4352 ASNA4352 ASNA4352 ULTEM 7801 Innovative PQ10058-509-01 use AIMS04-01-017 - No - No No No
by weight carbon fibers 509-00
Plastics No longer available

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 16 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 17 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Sabic
Polyetherimide with 30 % AIMS04-01- AIMS04-01- Yes
80 AIMS04-01-023 ULTEM 2310 Innovative IPS04-01-023-01 - - Yes Yes No
by weight glass fibers 023 023 (1,5)
Plastics

Sabic Not for new design,

Polyetherimide with 30 % Yes
81 DAN1286 DAN1286-01 DAN1286-01 ULTEM 2310 Innovative use AIMS04-01-023 - - Yes Yes No
by weight glass fibers (1,5)
Plastics Enhanced flow

Sabic Not for new design,

Polyetherimide with 30 % PQ10058- Yes
82 ASNA4306 ASNA4306 ASNA4306 ULTEM 2310 Innovative PQ10058-514-01 use AIMS04-01-023 - - Yes Yes No
by weight glass fibers 514-00 (1,5)
Plastics Enhanced flow

Sabic
Polyetherimide with 30 % AIMS04-01- AIMS04-01- Yes
83 AIMS04-01-023 ULTEM 2300 Innovative IPS04-01-023-02 - - Yes Yes No
by weight glass fibers 023 023 (1,5)
Plastics

Sabic
Polyetherimide with 30 % Not for new design, Yes
84 DAN1286 DAN1286-01 DAN1286-01 ULTEM 2300 Innovative 75-T-2-3010-3-1 - - Yes Yes No
by weight glass fibers use AIMS04-01-023 (1,5)
Plastics

Sabic
Polyetherimide with 30 % PQ10058- Not for new design, Yes
85 ASNA4303 ASNA4303 ASNA4303 ULTEM 2300 Innovative PQ10058-512-02 - - Yes Yes No
by weight glass fibers 512-00 use AIMS04-01-023 (1,5)
Plastics

Polyetherimide with 30 %
Sabic
by weight glass fibers; AIMS04-01- AIMS04-01- ULTEM CRS Yes
86 AIMS04-01-024 Innovative Enhanced flow - - Yes Yes No
enhanced chemical 024 024 5311 (1,5)
Plastics
resistance

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 17 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 18 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polyetherimide with 30 %
Sabic Not for new design,
by weight glass fibers; ULTEM CRS PQ10058- Yes
87 ASNA4307 ASNA4307 ASNA4307 Innovative PQ10058-515-01 use AIMS04-01-024 - - Yes Yes No
enhanced chemical 5311 515-00 (1,5)
Plastics Enhanced flow
resistance

ULTRASON Not for new design Yes

88 Polyethersulfone DAN1279 DAN1279 DAN1279-01 BASF AG - - Yes Yes No
E1010 No longer qualified (2,0)
ULTRASON Not for new design Yes
89 Polyethersulfone DAN1279 DAN1279 DAN1279-01 BASF AG - - Yes Yes No
E2010 No longer qualified (2,0)
PQ10058- Yes
90 Polyethersulfone TH5.576/2 VICTREX200 I.C.I PQ10058-400-00 No longer to be used - - Yes Yes No
400-00 (2,0)
PQ10058- Yes
91 Polyethersulfone Victrex 4800G SUMITOMO PQ10058-501-01 No longer to be used - - Yes Yes No
501-00 (2,0)

Polyethersulfone with 10 ULTRASON Not for new design Yes

92 DAN1280 DAN1280 DAN1280-01 BASF AG - - Yes Yes No
% by weight glass fiber E2010 G2 No longer qualified (2,0)

Polyphenylsulfone with Solvay

Yes
93 10 % by weight glass DAN1292 DAN1292 DAN1292-01 RADEL R-7110 Advanced 75-T-2-3002-2-1 Not for new design - - Yes Yes Yes
(2,0)
fibers Polymers

PQ10058-
94 Polysulfone TH5.576/1 Polysulfon Union Carbide PQ10058-400-00 No longer to be used - No - No No No
400-00

Material for AIMS04-01- AIMS04-01- CELSTRAN S Yes

95 AIMS04-01-008 Ticona IPS04-01-008-01 - - Yes Yes No
electromagnetic shielding 008 008 PPS-SF20 (1,5)

TEFLON PFA Du Pont de Yes

96 Perfluoroalkoxy DAN221 DAN221 DAN221 75-T-2-3014-7-1 - - Yes No No
340 Nemours (1,5)
TEFLON PFA Du Pont de Yes
97 Perfluoroalkoxy DAN221 DAN221 DAN221 75-T-2-3014-7-1 - - Yes No No
350 Nemours (1,5)
ASTM ASTM D6778 Du Pont de
98 Polyacetal (POM) ASTM D6778 Delrin 900P - No - No No No
D6778 POM0114 Nemours

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 18 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 19 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Du Pont de PQ10058-
99 Polyacetal (POM) DELRIN 150 PQ10058-020-01 Not for new design - No - No No No
Nemours 020-00
RILSAN BMNO PQ10058-
100 Polyamide 11 ASNB80470 ASNB80470 ASNB80470 Arkema PQ10058-007-03 Not for new design - No - No No No
TLD 007-00
Not for new design
No longer to be
101 Polyamide 11 RILSAN Arkema Z-14.304 - No - No No No
used, use
ASNB80470
102 Polyamide 11 RILSAN B Arkema Z-14.304 No longer to be used - No - No No No
PQ10058-
103 Polyamide 11 RILSAN BMNO Arkema PQ10058-007-01 Not for new design - No - No No No
007-00
No longer to be use,
PQ10058-
104 Polyamide 12 TH5.593/3 Grilamid Ems-Chemie PQ10058-008-00 use AIMS04-01- - No - No No No
008-00
004A
Evonik Not for new design,
PQ10058-
105 Polyamide 12 Vestamid Degussa PQ10058-008-00 use AIMS04-01- - No - No No No
008-00
GmbH 004A
Polyamide 12, flame AIMS04-01- AIMS04-01- VESTAMID Yes
106 AIMS04-01-004 Evonik IPS04-01-004-01 - - Yes Yes No
retardant 004 004 X7229 (1,5)
Polyamide 12, flame AIMS04-01- AIMS04-01- GRILAMID L20 Yes
107 AIMS04-01-004 Ems-Chemie IPS04-01-004-02 - - Yes Yes No
retardant 004 004 HFR (1,5)
Polyamide 12, flame AIMS04-01- AIMS04-01- VESTAMID Yes
108 AIMS04-01-004 Evonik IPS04-01-004-03 - - Yes Yes No
retardant 004 004 X7167 (2,3)
Not for new design,
Polyamide 12, flame GRILAMID L20 Yes
109 DAN1104 DAN1104 DAN1104 Ems-Chemie 75-T-2-3006-6-1 use AIMS04-01- - - Yes Yes No
retardant HFR (1,5)
004A
Not for new design,
Polyamide 12, flame VESTAMID Yes
110 DAN1104 DAN1104 DAN1104 Evonik 75-T-2-3006-1-1 use AIMS04-01- - - Yes Yes No
retardant X7167 (1,5)
004A
Not for new design,
Polyamide 12, flame VESTAMID Yes
111 DAN1105 DAN1105.1 DAN1105.1 Evonik use AIMS04-01- - - Yes Yes No
retardant X7229 (1,5)
004B

Polyamide 12, flame

AIMS04-01- AIMS04-01- Yes
112 retardant filled with glass AIMS04-01-025 Rau-Flight PA Rehau IPS04-01-025-01 low density - - Yes Yes No
025 025 (1,5)
hollow spheres

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 19 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 20 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polyamide 12-powder, AIMS04-01- AIMS04-01- AIMS04-01- Not for new design, Yes
113 AIMS04-01-004 ARM 3000 AEROQUIP - - Yes Yes No
flame retardant 004 004 004C no longer available (1,5)

Polyamide 6, PQ10058- Not for new design, Yes

114 ASNA3615 ASNA3615 ASNB80455 GRILON BS V0 Ems-Chemie PQ10058-009-01 - - Yes Yes No
flame retardant 009-00 use AIMS04-01-031 (1,0)

Polyamide 6, AIMS04-01- AIMS04-01- Yes

115 AIMS04-01-031 GRILON BS V0 Ems-Chemie IPS04-01-031-01 - - Yes Yes No
flame retardant 031 031 (1,0)

No longer to be
AKULON M2- PQ10058- used, use AIMS04-
116 Polyamide 6 TH5.593 Akulon PQ10058-001-00 - No - No No No
ZG 340 001-00 01-003
No longer available
Not for new design,
AKULON M2- use AIMS04-01-003
117 Polyamide 6 Akulon Z-14.314 - No - No No No
ZG 340 No longer to be used
No longer available

Not for new design,

AKULON M2- use AIMS04-01-003
118 Polyamide 6 Akulon S.27.1009 - No - No No No
ZG 340 No longer to be used
No longer available

Polyamide 6 with 30 % by AKULON K2- PQ10060-

119 TH5.594 Akulon PQ10060-201-01 No longer to be used - No - No No No
weight glass fibers 62V 201-00

Polyamide 6 with 30 % by 4442/300 PQ10060-

120 TH5.594/1 BASF PQ10060-201-01 No longer to be used - No - No No No
weight glass fibers (silicate filled) 201-00

Polyamide 6 with 35 % by DURETHAN

121 WL5.2205.0 Lanxess Not for new design - No - No No No
weight glass fibers BKV35

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 20 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 21 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polyamide 6 with 35 % by ULTRAMID

122 WL5.2205.0 BASF Not for new design - No - No No No
weight glass fibers B3EG7

Polyamide 6 with 35 % by ULTRAMID

123 WL5.2205.0 BASF Not for new design - No - No No No
weight glass fibers B3WG7

Du Pont de Not for new design

124 Polyamide 610 ZYTEL 31 Z-14.302 - No - No No No
Nemours No longer available
Du Pont de Not for new design
125 Polyamide 610 ZYTEL 33 Z-14.302 - No - No No No
Nemours No longer available

Sabic Formerly
Polyamide 610 with 50 % AIMS04-01- AIMS04-01- THERMOCOMP
126 AIMS04-01-010 Innovative IPS04-01-010-01 Thermocomp - No - No No No
by weight glass fibers 010 010 QF00A
Plastics QF100-10

Not for new design

127 Polyamide 612 WL5.2212.0 VESTAMID D14 Evonik No more available, - No - No No No
use VESTAMID D16
128 Polyamide 612 WL5.2212.0 VESTAMID D16 Evonik Not for new design - No - No No No
129 Polyamide 612 WL5.2212.0 VESTAMID D18 Evonik Not for new design - No - No No No
AIMS04-01- AIMS04-01- Du Pont de Yes
130 Polyamide 66 AIMS04-01-029 Zytel 101L IPS04-01-029-01 - - Yes Yes No
029 029 Nemours (3,2)
Not for new design,
131 Polyamide 66 ABR6-0123 ABR6-0123 ABR6-0123 RTP 200 RTP - No - No No No
use AIMS04-01-003
Not for new design,
132 Polyamide 66 ABR6-0123 ABR6-0123 ABR6-0123 RTP 200FR RTP - No - No No No
use AIMS04-01-003
Du Pont Not for new design,
133 Polyamide 66 ABR6-0123 ABR6-0123 ABR6-0123 ZYTEL 101F - No - No No No
Limited use AIMS04-01-003
ZYTEL FR7026 Du Pont Not for new design, Yes
134 Polyamide 66 ABR6-0123 ABR6-0123 ABR6-0123 - - Yes Yes No
VOF Limited use AIMS04-01-003 (1,5)

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 21 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 22 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Not for new design,

use AIMS04-01-003
ZYTEL FR7200 Du Pont
135 Polyamide 66 ABR6-0123 ABR6-0123 ABR6-0123 No longer available, - No - No No No
VOF Limited
use ZYTEL FR7026
VOF
PQ10058- No longer available,
136 Polyamide 66 ASNB80451 ASNB80451 ASNB80451 MARANYL 127 I.C.I PQ10058-003-02 - No - No No No
003-00 use AIMS04-01-003
No longer to be use,
137 Polyamide 66 DAN156 DAN156 DAN156 - No - No No No
use AIMS04-01-003
No longer to be use,
PQ10058-
138 Polyamide 66 TH5.593/1 AKULON R-W AKULON PQ10058-003-00 use AIMS04-01-003 - No - No No No
003-00
No longer available
DURETHAN Not for new design,
139 Polyamide 66 WL5.2201.0 Lanxess - No - No No No
A30 use AIMS04-01-003
DURETHAN Not for new design,
140 Polyamide 66 WL5.2201.0 Lanxess - No - No No No
A30S use AIMS04-01-003
Not for new design,
141 Polyamide 66 WL5.2201.0 ULTRAMID A3K BASF 75-T-2-3009-1-1 - No - No No No
use AIMS04-01-003

Polyamide 66 with 15 % ULTRAMID

142 DAN1197-01 BASF 75-T-2-3012-1-1 Not for new design - No - No No No
by weight glass fibers A3EG3

Polyamide 66 with 25 % ASTM ZYTEL Du Pont de IPSASTMD4066-

143 ASTM D4066 ASTM D4066 - No - No No No
by weight glass fibers D4066 FR70G25HSL Nemours 01

Polyamide 66 with 25 % ZYTEL Du Pont de

144 ABR6-0122 ABR6-0122 ABR6-0122 Not for new design - No - No No No
by weight glass fibers FR70G25V0 Nemours

Not for new design

Polyamide 66 with 28 % MARANYL AD PQ10058- No longer available,
145 ASNA3536 ASNA3536* ASNB80452 I.C.I PQ10058-004-01 - No - No No No
by weight glass fibers 197 004-00 use PQ10058-004-
03

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 22 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 23 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Not for new design

Polyamide 66 with 28 % ZYTEL Du Pont de PQ10058- No longer to be
146 ASNA3536 ASNA3536* ASNB80452 PQ10058-004-03 - No - No No No
by weight glass fibers FR70G28HSL Nemours 004-00 used, use
ASNB80455

Polyamide 66 with 28 % ZYTEL Du Pont de PQ10058-

147 ASNA3536 ASNA3536* ASNB80455 PQ10058-004-03 Not for new design - No - No No No
by weight glass fibers FR70G28HSL Nemours 004-00

Not for new design

Polyamide 66 with 28 % ZYTEL Du Pont de PQ10058- No longer to be
148 ABR6-0122 ABR6-0122 ABR6-0122 PQ10058-004-03 - No - No No No
by weight glass fibers FR70G28V1 Nemours 004-00 used; use ZYTEL
FR70G25V0

Polyamide 66 with 30 %
149 ABR6-0122 ABR6-0122 ABR6-0122 RTP 205FR RTP Not for new design - No - No No No
by weight glass fibers

Polyamide 66 with 35 % ULTRAMID Not for new design,

150 WL5.2206.0 BASF - No - No No No
by weight glass fibers A3EG7 use AIMS04-01-016

Polyamide 66 with 35 % ULTRAMID Not for new design,

151 WL5.2206.0 BASF - No - No No No
by weight glass fibers A3WG7 use AIMS04-01-016

Polyamide 66 with 35 %
AIMS04-01- AIMS04-01- Akroloy PA K17 Akro Plastic Yes
152 by weight glass fibers, AIMS04-01-005 IPS04-01-005-02 - - Yes Yes No
005 005 FR GmbH (1,5)
flame retardant

Polyamide 66 with 35 %
Akroloy PA K17 Akro Plastic Not for new design, Yes
153 by weight glass fibers, DAN1169 DAN1169-01 DAN1169 IPS04-01-005-02 - - Yes Yes No
FR GmbH use AIMS04-01-005 (1,5)
flame retardant

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 23 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 24 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Not for new design

Polyamide 66 with 35 %
ULTRAMID PQ10058- No longer to be Yes
154 by weight glass fibers, ASNA3536 ASNA3536 ASNB80452 BASF PQ10058-004-02 - - No Yes No
A3X2G7 004-00 used, use AIMS04- (3,2)
flame retardant
01-005

Polyamide 66 with 35 %
ULTRAMID PQ10058- Not for new design, Yes
155 by weight glass fibers, ASNA3536 ASNA3536 ASNB80455 BASF PQ10058-004-02 - - No Yes No
A3X2G7 004-00 No longer to be used (3,2)
flame retardant

Polyamide 66 with 35 %
ULTRAMID PQ10058- Not for new design, Yes
156 by weight glass fibers, ASNA3536 ASNA3536 ASNB80455 BASF PQ10058-004-02 - - No Yes No
A3X2G7 004-00 No longer to be used (3,2)
flame retardant

Polyamide 66 with 35 %
ULTRAMID Not for new design, Yes
157 by weight glass fibers, DAN1169 DAN1169-01 DAN1169-01 BASF 75-T-2-3015-1-1 - - No Yes No
A3X2G7 No longer to be used (3,2)
flame retardant

Polyamide 66 with 35 %
by weight glass fibers AIMS04-01- AIMS04-01- ULTRAMID Yes
158 AIMS04-01-028 BASF IPS04-01-028-01 - - No No No
without smoke and 028 028 A3X2G7 (1,5)
toxicity requirements

Polyamide 66, heat AIMS04-01- AIMS04-01- Du Pont de Yes

159 AIMS04-01-003 ZYTEL 103 HSL IPS04-01-003-02 - - Yes Yes No
stabilized 003 003 Nemours (3,2)
Polyamide 66, heat Du Pont de PQ10058- ASNA4340 / Not for new design, Yes
160 ASNB80455 ASNB80455 ASNB80455 ZYTEL 103 HSL - - Yes Yes No
stabilized Nemours 003-00 PQ10058-003-03 use AIMS04-01-003 (3,2)
Polyamide 66, heat Du Pont de PQ10058- ASNA4340 / Not for new design, Yes
161 ASNB80451 ASNB80451 ASNB80451 ZYTEL 103 HSL - - Yes Yes No
stabilized Nemours 003-00 PQ10058-003-03 use AIMS04-01-003 (3,2)
Polyamide 66, heat ULTRAMID Not for new design, Yes
162 DAN1293 DAN1293 DAN1293-01 BASF 75-T-2-3008-1-1 - - Yes Yes No
stabilized A3W use AIMS04-01-003 (3,2)
______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 24 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 25 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polyamide 66, heat Du Pont de Not for new design, Yes

163 DAN1293 DAN1293 DAN1293-01 ZYTEL 103 HSL 75-T-2-3008-7-1 - - Yes Yes No
stabilized Nemours use AIMS04-01-003 (3,2)

Polyamide with 35 % by AIMS04-01- AIMS04-01-

164 AIMS04-01-016 GRILON AG35 Ems-Chemie IPS04-01-016-01 - No - No No -
weight glass fibers 016 016

AIMS04-01- AIMS04-01- VICTREX PEEK Yes

165 Polyaryletherketone AIMS04-01-012 Victrex IPS04-01-012-01 - - Yes Yes No
012 012 151G (1,5)
AIMS04-01- AIMS04-01- VICTREX PEEK Yes
166 Polyaryletherketone AIMS04-01-012 Victrex IPS04-01-012-01 - - Yes Yes No
012 012 450G (1,5)
AIMS04-01- AIMS04-01- VICTREX PEEK Yes
167 Polyaryletherketone AIMS04-01-012 Victrex IPS04-01-012-03 - - Yes Yes No
012 012 150G (1,5)
Solvay
AIMS04-01- AIMS04-01- KetaSpire KT- Yes
168 Polyaryletherketone AIMS04-01-012 Speciality IPS04-01-012-02 - - Yes Yes No
012 012 820 NT (1,5)
Polymers
VICTREX PEEK PQ10058- Not for new design, Yes
169 Polyaryletherketone Victrex PQ10058-502-01 - - Yes Yes No
450G 502-00 use AIMS04-01-12 (1,5)

Polyaryletherketone with
AIMS04-01- AIMS04-01- LUVOCOM Lehmann & Yes
170 20 % by weight glass AIMS04-01-020 IPS04-01-020-01 - - Yes Yes No
020 020 1105/GF20/EM Voss (1,5)
fibers

Polyaryletherketone with
LUVOCOM Lehmann & Not for new design, Yes
171 20 % by weight glass DAN1294 DAN1294 DAN1294-01 75-T-2-3004-9-1 - - Yes Yes No
1105/GF20/EM Voss use AIMS04-01-020 (1,5)
fibers

Polyaryletherketone with
AIMS04-01- AIMS04-01- VICTREX Yes
172 30 % by weight carbon AIMS04-01-007 Victrex IPS04-01-007-02 - - Yes Yes No
007 007 150CA30 (1,5)
fibers

Polyaryletherketone with
AIMS04-01- AIMS04-01- VICTREX Yes
173 30 % by weight carbon AIMS04-01-007 Victrex IPS04-01-007-01 - - Yes Yes No
007 007 450CA30 (1,5)
fibers

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 25 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 26 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polyaryletherketone with Solvay

AIMS04-01- AIMS04-01- KetaSpire KT- Yes
174 30 % by weight carbon AIMS04-01-007 Speciality IPS04-01-007-03 - - Yes Yes No
007 007 880 CF30 (1,5)
fibers Polymers

Polyaryletherketone with Not for new design,

VICTREX PQ10058- Yes
175 30 % by weight carbon ASNA4346 ASNA4346 ASNA4346 Victrex PQ10058-521-01 use AIMS04-01-007 - - Yes Yes No
150CA30 521-00 (1,5)
fibers No longer to be used

Polyaryletherketone with
VICTREX PQ10058- Not for new design, Yes
176 30 % by weight carbon ASNB80801 ASNB80801 ASNB80801 Victrex PQ10058-508-01 - - Yes Yes No
450CA30 508-00 use AIMS04-01-007 (1,5)
fibers

Polyaryletherketone with
VICTREX Not for new design, Yes
177 30 % by weight carbon DAN1222 DAN1222 DAN1222-01 Victrex IPSDAN1222-01 - - Yes Yes No
150CA30 use AIMS04-01-007 (1,5)
fibers

Polyaryletherketone with
VICTREX Not for new design, Yes
178 30 % by weight carbon DAN1222 DAN1222 DAN1222-01 Victrex IPSDAN1222-01 - - Yes Yes No
450CA30 use AIMS04-01-007 (1,5)
fibers

Polyaryletherketone with
VICTREX PQ10058- Not for new design, Yes
179 30 % by weight glass ASNA5139 ASNA5139 ASNA4347 Victrex PQ10058-522-01 - - Yes Yes No
150GL30 522-00 use AIMS04-01-006 (1,5)
fibers

Polyaryletherketone with
AIMS04-01- AIMS04-01- VICTREX Yes
180 30 % by weight glass AIMS04-01-006 Victrex IPS04-01-006-02 - - Yes Yes No
006 006 150GL30 (1,5)
fibers

Polyaryletherketone with
AIMS04-01- AIMS04-01- VICTREX Yes
181 30 % by weight glass AIMS04-01-006 Victrex IPS04-01-006-01 - - Yes Yes No
006 006 450GL30 (1,5)
fibers

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 26 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 27 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polyaryletherketone with
AIMS04-01- AIMS04-01- VICTREX Yes
182 30 % by weight glass AIMS04-01-006 Victrex IPS04-01-006-01 - - Yes Yes No
006 006 450GL30 (1,5)
fibers

Polyaryletherketone with
VICTREX Not for new design, Yes
183 30 % by weight glass DAN1259 DAN1259 DAN1259-01 Victrex - - Yes Yes No
450GL30 use AIMS04-01-006 (1,5)
fibers

Polyaryletherketone with
VICTREX PQ10058- Not for new design, Yes
184 30 % by weight glass Victrex PQ10058-503-01 - - Yes Yes No
450GL30 503-00 use AIMS04-01-006 (1,5)
fibers

Polyaryletherketone with
AIMS04-01- AIMS04-01- VICTREX PEEK Yes
185 40 % by weight carbon AIMS04-01-026 Victrex IPS04-01-026-01 - - Yes Yes No
026 026 90 HMF40 (1,5)
fibers

Polyaryletherketone with
AIMS05-26- AIMS05-26- SUPREM 55 % Yes
186 55 % by volume AIMS05-26-002 Suprem SA IPS05-26-002-01 Pultrusion molding - - Yes Yes No
002 002 IM7/PEEK (1,5)
continuous carbon fibers

Pultrusion molding
Polyaryletherketone with
AIMS05-26- AIMS05-26- IGOREX 1.0 faigle Not for new design Yes
187 55 % by volume AIMS05-26-001 IPS05-26-001-01 - - Yes Yes No
001 001 G2/55 Kunststoffe Couple no longer (1,5)
continuous glass fibers
qualified

Sabic
Polyetherimide with 40 % AIMS04-01- AIMS04-01- Yes
188 AIMS04-01-027 ULTEM 2400 Innovative IPS04-01-027-01 - - Yes Yes -
by weight glass fibers 027 027 (2,0)
Plastics

Polyphenylensulfide with
AIMS04-01- AIMS04-01- Yes
189 40 % by weight glass AIMS04-01-018 Fortron 1140L4 Ticona IPS04-01-018-01 - - Yes Yes No
018 018 (1,5)
fibers

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 27 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 28 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polyphenylensulfide with
AIMS04-01- AIMS04-01- Yes
190 40 % by weight glass AIMS04-01-018 Fortron 1140LO Ticona IPS04-01-018-01 - - Yes Yes No
018 018 (1,5)
fibers

Polyphenylensulfide with
Not for new design, Yes
191 40 % by weight glass ABR6-0129 ABR6-0129 ABR6-0129 Fortron 1140LO Ticona - - Yes Yes No
use AIMS04-01-018 (1,5)
fibers

Polyphenylensulfide with Not for new design,

Phillips Yes
192 40 % by weight glass ABR6-0129 ABR6-0129 ABR6-0129 RYTON A100 use AIMS04-01-018 - - Yes Yes No
Petrolium (1,5)
fibers No longer available

Polyphenylensulfide with
Phillips Not for new design, Yes
193 40 % by weight glass DAN229 DAN229 DAN229 RYTON R4 - - Yes Yes No
Petrolium use AIMS04-01-018 (1,5)
fibers

REHAU PQ10058- No longer to be use

194 Polypropylene RAU-PP122 PQ10058-352-01 - No - No No No
Plastics 352-00 No longer available
Polypenco SRL Yes
195 Polytetrafluoroethylene AFS2061 DSM No longer to be used - - Yes No No
F (1,5)
PQ10058- Yes
196 Polytetrafluoroethylene TH5.590/2 HN 1301 DSM PQ10058-121-00 No longer to be used - - Yes No No
121-00 (1,5)
Yes
197 Polytetrafluoroethylene POLYPENCO ICO S.27.1010 No longer to be used - - Yes No No
(1,5)
Du Pont de Yes
198 Polytetrafluoroethylene TEFLON Z-14.305 No longer to be used - - Yes No No
Nemours (1,5)

Polytetrafluoroethylene POLYPENCO Yes

199 AFS2061 DSM No longer to be used - - Yes No No
mica filled SRL F (1,5)

Polytetrafluoroethylene Yes
200 FLUOROSINT DSM Z-14.306 No longer to be used - - Yes No No
mica filled (1,5)

MADEIRA AIR PQ10058-

201 Polyurethan ABCO 2449 PQ10058-510-01 No longer to be used - No - No No No
SUPPLY 510-00

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 28 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 29 of 64

Standard Material Product Drawing IPS / Specific F F F

Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

A&B PQ10058-
202 Polyurethan M25W1004-1 PQ10058-510-02 No longer to be used - No - No No No
PLASTICS 510-00
Not for new design Yes
203 Polyvinylchloride (PVC) DAN194 DAN194 DAN194 Stükerjürgen - - Yes No No
No longer to be used (1,5)
ASTM D 1784 ASTM D 1784
Polyvinylchloride rigid ASTM D Rehau- PQ10058- Yes
204 60T TypeIII 60T TypeIII Bip-Fromoplas PQ10058-050-00 No longer to be used - - Yes No No
(not plastified, PVC) 1784 Plastics-Solvay 050-00 (1,5)
Grade 1 Grade 1

Polyvinylchloride rigid Rehau- PQ10058- Yes

205 TH5.583 Bip-Fromoplas PQ10058-050-00 No longer to be used - - Yes No No
(not plastified, PVC) Plastics-Solvay 050-00 (1,5)

Thermoplastic elastomer, Not for new design,

206 DAN1105 DAN1105.3 DAN1105.3 PEBAX 3533 Arkema Yes No - No No No
Polyamide only for ABS0304

Thermoplastic elastomer, AIMS04-07- AIMS04-07- Yes

207 AIMS04-07-001 ESTANE 58244 Lubrizol IPS04-07-001-01 Formerly Noveon - - Yes Yes No
Polyurethane 001 001 (2,0)

Polymethylmethacrylate AIMS04-01- AIMS04-01- Plexiglas Resist

208 AIMS04-01-030 Röhm - No - No No No
(PMMA) 030 030 AG 100

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 29 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue N
Page 30 of 64
Table 2: Sheet
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

PETERGLAS PQ10058- PQ10058-205- Not for new design

1 Acrylic for mirror ASNA3618 ASNA3618* Peterlite No No - No No No
VM1000 205-00 01 No longer to be used

Mirror material (PE core

2 ASNA3618 ASNA36183030 DIBOND Mirror 3A Composites
covered with Al sheets)

Mirror material (PE core Wulfmeyer A- No longer available,

3 ASNA3618 ASNA36183030 Wulfmeyer
covered with Al sheets) Look use DIBOND Mirror

Acrylic material - Crack PLEXIGLAS unstrechted material,

MIL-PRF- MIL-PRF- PQ10058- PQ10058-202-
4 propagation resistant MIL-PRF-8184-I2 GS 249 Evonik improved moisture Yes No - Yes Yes No
8184F 8184F 202-00 01
acrylic quality Type I, Class 2 resistance

Acrylic material - Crack

PLEXIGLAS
5 propagation resistant WL5.1416 Evonik Yes No - Yes Yes No
GS 249
acrylic quality

Acrylic material - Shock No longer to be

resistant, corrosion PQ10058- PQ10058-201- used;
6 TH5.589/3 PLEXIDUR Evonik No No - No No No
resistant and UV resistant 201-00 00 use Quadrant
acrylic copolymer Nylatron GS

Acrylic material - Shock

resistant, corrosion
7 WL5.1414 PLEXIDUR Evonik Not for new design No No - No No No
resistant and UV resistant
acrylic copolymer

MIL-P-25690
Acrylic material - Side PLEXIGLAS PQ10058- PQ10058-201-
8 DTD 900/6050 Evonik Yes No - Yes Yes No
window cockpit 249 201-01 01
AFS
Acrylic material -
Lucas
9 Stretched acrylic internal MIL-P-25690 DYNACRYLIC S.27.1013 Yes No - Yes Yes No
Aerospace
cabin window

_______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2018. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 30 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 31 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Acrylic sheets for

PLEXIGLAS Heat and craze
10 glazings - cast + prEN4636 Evonik Yes No - Yes Yes No
GS 249 resistant, stretched
stretched

PLEXIGLAS PQ10058- PQ10058-209- Extruded product,

11 Acrylic standard quality Evonik Yes No - Yes Yes No
XT/43:870 209-00 01 brown colored

No longer to be
ALTUGLAS PQ10058- PQ10058-200-
12 Acrylic standard quality ASNA3534 ASNA3534* Atohaas used, use PQ10058- No No - No No No
M33 200-00 02
200-03

ALTUGLAS PQ10058- PQ10058-200-

13 Acrylic standard quality ASNA3534 ASNA3534* Atohaas No No - No No No
M70 200-00 03
PLEXIGLAS
PQ10058- PQ10058-206- Class 0 Not as good
14 Acrylic standard quality ASNA3619 ASNA3619* GS 245 CLASS Evonik Yes No - Yes Yes No
206-00 01 as class 2
2
PLEXIGLAS
PQ10058- PQ10058-207- Class 0 Not as good
15 Acrylic standard quality ASNA3619 ASNA3619* GS 245 CLASS Evonik Yes No - Yes Yes No
207-00 01 as class 2
0
PLEXIGLAS
16 Acrylic standard quality prEN4634 Evonik Yes No - Yes Yes No
GS 245
PLEXIGLAS Heat and craze
17 Acrylic standard quality prEN4635 Evonik Yes No - Yes Yes No
GS 249 resistant

18 Acrylic standard quality DTD5592 PERSPEX Lucite No longer to be used No No - No No No

PLEXIGLAS
19 Acrylic standard quality DTD5592 Evonik No longer to be used Yes No - Yes Yes No
GS 245
PLEXIGLAS
20 Acrylic standard quality DTD5592 Evonik No longer to be used Yes No - Yes Yes No
GS 249
PLEXIGLAS PQ10058- PQ10058-200-
21 Acrylic standard quality TH5.589/2 Evonik No longer to be used Yes No - Yes Yes No
233 200-00 00
ALTUGLAS
22 Acrylic standard quality WL5.1412 Atohaas Not for new design No No - No No No
124-10000
PLEXIGLASS PQ10058- PQ10058-208-
23 Acrylic standard quality Evonik Yes No - Yes Yes No
GS 233 208-00 01

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 31 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 32 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s
Sabic
Low heat release LEXAN XHR Yes
24 ABS5607 ABS5607A* AIMS04-06-001 Innovative No longer available - Yes Yes Yes
thermoplastic material 6000 (3,0)
Plastics

Low heat release EUROPLEX IPS04-06-001- Thickness of sheets Yes

25 ABS5607 ABS5607A* AIMS04-06-001 Evonik - - Yes Yes Yes
thermoplastic material PPSU 01 1mm to 3mm (1,5)

Sabic Not for new design,

Low heat release PQ10058- PQ10058-504- Yes
26 ASNA3633 ASNA3633* ASNB80701 ULTEM 1613 Innovative use ABS5607 - - Yes Yes Yes
thermoplastic material 504-00 01 (2,0)
Plastics No longer available

Not for new design,

Low heat release PES: PQ10058- PQ10058-504- Yes
27 ASNA3633 ASNA3633* ASNB80701 Evonik use ABS5607 - - Yes Yes Yes
thermoplastic material EUROPLEX 504-00 02 (2,0)
No longer available

Not for new design,

Low heat release EUROPLEX 75-T-2-3016-6- use ABS5607 Yes
28 DAN486 DAN486A* DAN1291-02 Evonik - - Yes Yes Yes
thermoplastic material PPSU 1 thickness of sheets (1,5)
1mm to 3mm

Low heat release Thickness of sheets

EUROPLEX IPS04-06-005- Yes
29 transparent thermoplastic ABS5706 ABS5706A* AIMS04-06-005 Evonik 4 mm, 6mm and - - Yes Yes Yes
PPSU clear 01 (4,0)
material 8mm

Thickness of sheets
Low heat release
AIMS04-06- EUROPLEX IPS04-06-006- 5mm, 6mm and 8mm Yes
30 transparent thermoplastic ABS5706 ABS5706B* Evonik - - Yes Yes Yes
006A PPSU clear KR 01 clear coating, scratch (5,0)
material
resistant

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 32 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 33 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Thickness of sheets
Low heat release
AIMS04-06- EUROPLEX IPS04-06-006- 5mm, 6mm and 8mm Yes
31 transparent thermoplastic ABS5706 ABS5706C* Evonik - - Yes Yes Yes
006B PPSU clear DF 01 translucent coating, (5,0)
material
scratch resistant

Low heat release Sabic

Lexan IPS04-06-024- Yes
32 transparent thermoplastic ABS5873 ABS5873* AIMS04-06-024 Innovative No longer available - - Yes Yes Yes
XHR2000A 01 (3,0)
material Plastics

Sabic
PQ10058- PQ10058-160- Yes
33 Polycarbonate, colored ASNA3531 ASNA3531* ASNB80383 LEXAN F6000 Innovative - - Yes Yes No
160-00 03 (1,5)
Plastics

Not for new design,

XANTAR PQ10058- PQ10058-519- use DAN197B or
34 Polycarbonate, colored ASNA3614 ASNA3614* Quadrant EPP - No - No No No
FC25R 519-00 01 ASNA3531
No longer available

Not for new design,

use DAN197B or
MAKROLON PQ10058- PQ10058-166- ASNA3531
35 Polycarbonate, colored ASNA3617 ASNA3617* Covestro - No - No No No
281 166-00 02 No longer available
Shock resistant
UV-stabilized

No longer to be
MAKROLON PQ10058- PQ10058-160-
36 Polycarbonate, colored TH5.575 Evonik used, use DAN197B - No - No No No
285 160-00 00
or ASNA3531

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 33 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 34 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Sabic No longer to be
PQ10058- PQ10058-160- Yes
37 Polycarbonate, colored TH5.575/2 LEXAN F6000 Innovative used, use DAN197B - - Yes Yes No
160-00 00 (1,5)
Plastics or ASNA3531

Sabic Not for new design,

Yes
38 Polycarbonate, colored LEXAN F6000 Innovative S.27.1011 use DAN197B or - - Yes Yes No
(1,5)
Plastics ASNA3531

Polycarbonate, flame PQ10058- PQ10058-160- Yes

39 ASNA3531 ASNA3531* ASNB80383 EUROPLEX F3 Evonik - - Yes Yes No
retardant, colored 160-00 04 (1,5)
Polycarbonate, flame Yes
40 DAN197 DAN197B* DAN198 EUROPLEX F3 Evonik - - Yes Yes No
retardant, colored (1,5)
Sabic
Polycarbonate, flame Yes
41 DAN197 DAN197B* DAN198 LEXAN F6000 Innovative - - Yes Yes No
retardant, colored (1,5)
Plastics
LEXAN Sabic
Polycarbonate, flame Yes
42 ASNA3533 ASNA35331829 ASNB80383 F2000A- Innovative - - Yes Yes No
retardant, translucent (2,0)
WH7E2350 Plastics
Polycarbonate, flame Yes
43 DAN197 DAN197A* DAN1103.2 EUROPLEX F6 Evonik Milky-translucent - - Yes Yes No
retardant, translucent (1,5)
Not for new
Polycarbonate, flame PQ10058- PQ10058-162- Yes
44 ASNA3533 ASNA3533* ASNB80383 EUROPLEX F4 Evonik design,use - - Yes Yes No
retardant, transparent 162-00 03 (1,5)
DAN197A
Not for new
Polycarbonate, flame PQ10058- PQ10058-168- Yes
45 ASNA3533 ASNA3533* ASNB80383 EUROPLEX F7 Evonik design,use - - Yes Yes No
retardant, transparent 168-00 01 (1,5)
DAN197A

Polycarbonate, flame No longer available, Yes

46 DAN197 DAN197A* DAN1103.2 EUROPLEX F4 Evonik - - Yes Yes No
retardant, transparent use Europlex F7 (1,5)

Polycarbonate, flame IPSDAN1103- Yes

47 DAN197 DAN197A* DAN1103.2 EUROPLEX F7 Evonik UV-stabilized - - Yes Yes No
retardant, transparent 02 (1,5)

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 34 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 35 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Not for new design,

Polycarbonate, Yes
48 DAN197 DAN197E* WL5.1621.3 EUROPLEX F6 Evonik use DAN197A - - Yes Yes No
translucent (1,5)
Milky-translucent

Sabic
Polycarbonate, ANSA3533 Product qualified for Yes
49 ASNA3533 ASNA35331805 ASNB80383 Lexan FR60 Innovative - - Yes Yes No
transparent 1805 0,5 mm thickness (0,5)
Plastics

Not for new design,

Sabic use DAN197A
Polycarbonate, PQ10058- PQ10058-162-
50 ASNA3533 ASNA3533* ASNB80383 LEXAN 9600 Innovative Product qualified for - No - No Yes No
transparent 162-00 01
Plastics small thickness (e.g.
1,5mm)

Not for new design,

Sabic
Polycarbonate, PQ10058- PQ10058-162- use DAN197A Yes
51 ASNA3533 ASNA3533* ASNB80383 LEXAN F2000 Innovative - - No Yes No
transparent 162-00 02 Product qualified for (3,2)
Plastics
thickness (e.g. 3mm)

Sabic
Polycarbonate, Lexan Not for new design,
52 ASNA3617 ASNA3617* Innovative - No - No Yes No
transparent ULG1003 use DAN197A.
Plastics

Not for new design,

Sabic use DAN197A
Polycarbonate, PQ10058- PQ10058-166-
53 ASNA3617 ASNA3617* LEXAN 9030 Innovative No longer to be used - No - No Yes No
transparent 166-00 01
Plastics Shock resistant
UV-stabilized

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 35 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 36 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s
Sabic
Polycarbonate, Not for new design,
54 DAN197 DAN197E* WL5.1621.3 LEXAN 9600 Innovative - No - No Yes No
transparent use DAN197A
Plastics

Polycarbonate, Not for new design,

55 DAN197 DAN197F* WL5.1621.4 EUROPLEX F2 Evonik - No - No Yes No
transparent use DAN197A

Not for new design,

EUROPLEX PQ10058- PQ10058-511- Yes
56 Polyethersulfone ASNA3681 ASNA3681* ASNB80701 Evonik use ABS5607 - - Yes Yes Yes
PES LHR 511-00 01 (2,0)
No longer available

PQ10058- PQ10058-400-
57 Polysulfone TH5.576/1 Polysulfon Union Carbide No longer to be used - No - No No No
400-00 00
BOLTARON PQ10058- PQ10058-150-
58 Acrylnitril-Butadien-Styrol TH5.587 Boltaron No longer to be used - No - No No No
6500 150-00 00
PQ10058- PQ10058-150-
59 Acrylnitril-Butadien-Styrol TH5.587/1 NOVODUR PK Ineos No longer to be use - No - No No No
150-00 00
BOLTARON PQ10058- PQ10058-150-
60 Acrylnitril-Butadien-Styrol TH5.587/2 Boltaron No longer to be use - No - No No No
6800 150-00 00
PQ10058- PQ10058-021-
61 Polyacetal (POM) ASNA5130 ASNA5130* ERTACETAL H Quadrant EPP - No - No No No
021-00 01
ERTACETAL C IPSASNA5130-
62 Polyacetal (POM) ASNA5130 ASNA5130* Quadrant EPP - No - No No No
(POM-C) 02
ERTACETAL C
63 Polyacetal (POM) ABR6-0199 ABR6-0199 ABR6-0199 Quadrant EPP - No - No No No
(POM-C)
TECAFORM
Ensinger
64 Polyacetal (POM) ABR6-0199 ABR6-0199 ABR6-0199 AH - No - No No No
GmbH
(POM-C)
PQ10058- PQ10058-013-
65 Polyamide 11 ASNA3527 ASNA3527* 3P - No - No No No
013-00 01
PQ10058- PQ10058-011-
66 Polyamide 12 ASNA3527 ASNA3527* Nylatron 12 Quadrant EPP - No - Yes Yes No
011-00 02
PQ10058- PQ10058-011-
67 Polyamide 12 ASNA5081 ASNA5081* RAU-PA592 Rehau Plastics No longer available - No - Yes Yes No
011-00 01
Ensinger IPS04-06-022-
68 Polyamide 6 ABS5935 ABS5935PD* AIMS04-06-022 Tecamid 6 - No - No No No
GmbH 01

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 36 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 37 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s
PQ10058- PQ10058-010-
69 Polyamide 6/MoS2 J-665M 3P No longer to be used - No - No No No
010-00 01

SUSTAMID Röchling Not for new design

70 Polyamide 610 LN9392 LN9392x* WL5.2202.3 - No - Yes Yes No
610 Sustaplast No longer available

IPS04-06-019-
71 Polyamide 66 ABS5935 ABS5935A* AIMS04-06-019 Nylatron 66 SA Quadrant EPP - No - Yes Yes No
03
Röchling IPS04-06-019-
72 Polyamide 66 ABS5935 ABS5935A* AIMS04-06-019 Sustamid 66 - No - Yes Yes No
Sustaplast 04
Ensinger IPS04-06-019-
73 Polyamide 66 ABS5935 ABS5935A* AIMS04-06-019 Tecamid 66 - No - Yes Yes No
GmbH 01

No longer to be
PQ10058- PQ10058-002-
74 Polyamide 66 ASNA3526 ASNA3526* ASNB80451 Nylatron 66 Quadrant EPP used, use AIMS04- - No - Yes Yes No
002-00 03
06-019

PQ10058- PQ10058-002- Not for new design,

75 Polyamide 66 ASNA3526 ASNA3526* ASNB80455 Nylatron 66 Quadrant EPP - No - Yes Yes No
002-00 03 use ABS5935

Röchling Not for new design,

76 Polyamide 66 LN9392 LN9392A* WL5.2201.3 SUSTAMID 66 - No - Yes Yes No
Sustaplast use ABS5935

Not for new design,

77 Polyamide 66 ABR6-0121 ABR6-0121 ABR6-0121 NYLON 6.6 DSM - No - Yes Yes No
use ABS5935

Not for new design,

78 Polyamide 66 ABR6-0121 ABR6-0121 ABR6-0121 Nylatron 66SA Quadrant EPP - No - Yes Yes No
use ABS5935

Not for new design,

79 Polyamide 66 NYLON 6.6 DSM Z-14.301 - No - Yes Yes No
use ABS5935

IPS04-06-023-
80 Polyamide 66/MoS2 ABS5935 ABS5935B* AIMS04-06-023 Nylatron GS Quadrant EPP - No - No No No
02
Ensinger IPS04-06-023-
81 Polyamide 66/MoS2 ABS5935 ABS5935B* AIMS04-06-023 Tecamid 66 Mo - No - No No No
GmbH 01

82 Polyamide 66/MoS2 DAN155 DAN155A* WL.5.2201.3 Nylatron GS Quadrant EPP Not for new design - No - No No No

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 37 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 38 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Foils
83 Polyamide 66/MoS2 DAN155 DAN155A* WL5.2201.3 Nylatron GS Polypenco - No - No No No
Not for new design

No longer to be
84 Polyamide 66/MoS2 ABR6-0124 ABR6-0124 ABR6-0124 Nylatron GS Polypenco used; use Quadrant - No - No No No
Nylatron GS

Not for new design,

85 Polyamide 66/MoS2 ABR6-0124 ABR6-0124 ABR6-0124 Nylatron GS Quadrant EPP - No - No No No
use ABS5935

Polyamide 66 with 30% Nylatron 66- IPS04-06-020-

86 ABS5932 ABS5932B* AIMS04-06-020 Quadrant EPP - No - Yes Yes No
by weight glass fibre GF30 02
Polyamide 66 with 35% Tecamid 66- IPS04-06-020-
87 ABS5932 ABS5932A* AIMS04-06-020 Ensinger - No - Yes Yes No
by weight glass fibre GF35 01
IPS04-06-014- Formerly Torlon Yes
88 Polyamideimide ABS5913 ABS5913A* AIMS04-06-014 Duratron T4203 Quadrant EPP - - Yes Yes No
01 T4203 (1,5)
Polyamideimide wear IPS04-06-015- Formerly Torlon Yes
89 ABS5913 ABS5913B* AIMS04-06-015 Duratron T4301 Quadrant EPP - - Yes Yes No
resistance 01 T4301 (1,5)
Ketron 1000 IPS04-06-004- Yes
90 Polyaryletherketone ABS5695 ABS5695A* AIMS04-06-004 Quadrant EPP - - Yes Yes No
PEEK 02 (1,5)
IPS04-06-004- Yes
91 Polyaryletherketone ABS5695 ABS5695A* AIMS04-06-004 TECAPEEK Ensinger - - Yes Yes No
01 (1,5)
IPS04-06-013-
92 Polyarylethetketone foil ABS5906 ABS5906A* AIMS04-06-013 APTIV 2000 Victrex - See material specification
01
Polyaryletherketone with
TECAPEEK IPS04-06-017- Yes
93 30 % by weight carbon ABS5926 ABS5926A* AIMS04-06-017 Ensinger - - Yes Yes No
CF30 01 (3,0)
fibers
Sabic
STAMILAN PQ10058- PQ10058-350-
94 Polyethylene TH5.585 Innovative No longer to be used - No - No No No
GRADE 1510 350-00 00
Plastics
Sabic
STAMILAN PQ10058- PQ10058-350-
95 Polyethylene TH5.585/1 Innovative No longer to be used - No - No No No
GRADE 1300 350-00 00
Plastics
Sabic
STAMILAN PU- PQ10058- PQ10058-351-
96 Polypropylene TH5.586 Innovative No longer to be used - No - No No No
V 351-00 00
Plastics

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 38 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 39 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

PQ10058- PQ10058-352- No longer to be used

97 Polypropylene RAU-PP122 Rehau Plastics - No - No No No
352-00 01 No longer available

Röchling
Polypropylene flame Polystone PP Yes
98 ABS5762 ABS5762A* ABS5762 Engineering Not for new design - - No No No
retardant grau (2,0)
Plastics

No longer to be
Du Pont de PQ10058- PQ10058-121- used, Yes
99 Polytetrafluoroethylene ASNA3529 ASNA3529* ASNB80501 TEFLON - - Yes No No
Nemours 121-00 06 use PQ10058-121- (1,5)
07
PQ10058- PQ10058-121- Yes
100 Polytetrafluoroethylene ASNA3529 ASNA3529* ASNB80501 PTFE pur 3P - - Yes No No
121-00 07 (1,5)

No longer to be
PQ10058- PQ10058-121- Yes
101 Polytetrafluoroethylene ASNA3529 ASNA3529* ASNB80501 PTFE SEE used; use PQ10058- - - Yes No No
121-00 08 (1,5)
121-07

Mikro-Technik Not for new design, Yes

102 Polytetrafluoroethylene LN9298 LN9298A* WL5.1129.10 PTFE - - Yes No No
Plastic use ASNA3529 (1,5)

Not for new design, Yes

103 Polytetrafluoroethylene LN9298 LN9298A* WL5.1129.10 PTFE pur 3P - - Yes No No
use ASNA3529 (1,5)

Not for new design, Yes

104 Polytetrafluoroethylene ABR6-0126 ABR6-0126 ABR6-0126 Fluorocarbon - - Yes No No
use ASNA3529 (1,5)

TH5.590 PQ10058- PQ10058-121- No longer to be use, Yes

105 Polytetrafluoroethylene HN 1101 DSM - - Yes No No
TH5.590/1 121-00 00 use ASNA3529 (1,5)

No longer to be use, Yes

106 Polytetrafluoroethylene POLYPENCO ICO S.27.1010 - - Yes No No
use ASNA3529 (1,5)

PQ10058- PQ10058-121- No longer to be use, Yes

107 Polytetrafluoroethylene HN 1201 DSM - - Yes No No
121-00 00 use ASNA3529 (1,5)

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 39 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 40 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polytetrafluoroethylene Polypenco SRL Not for new design, Yes

108 AFS2061 AFS2061 DSM - - Yes No No
mica filled F use ABR6-0187 (1,5)

Polytetrafluoroethylene FLUOROSINT Yes

109 ABR6-0187 ABR6-0187 ABR6-0187 Quadrant EPP - - Yes No No
mica filled 500 (1,5)
Polytetrafluoroethylene - PTFE traité PQ10058- PQ10058-124- Yes
110 ASNA3634 ASNA3634* ASNB80501 3P - - Yes No No
Treated for bonding collable 124-00 01 (1,5)

No longer to be
Polytetrafluoroethylene - PQ10058- PQ10058-124- Yes
111 ASNB80501 PTFE collable Pirep used; use PQ10058- - - Yes No No
Treated for bonding 124-00 02 (1,5)
124-01

No longer to be
Polytetrafluoroethylene - PTFE traité PQ10058- PQ10058-124- Yes
112 ASNB80501 STE Norton used; use PQ10058- - - Yes No No
Treated for bonding collable 124-00 03 (1,5)
124-01

Polytetrafluoroethylene
PTFE chargé PQ10058- PQ10058-123- Yes
113 with 15 % by weight glass ASNA3538 ASNA3538* ASNB80501 3P - - Yes No No
15 % verre 123-00 03 (1,5)
fibers
Polytetrafluoroethylene
PTFE chargé PQ10058- PQ10058-125- Yes
114 with 25 % by weight glass 3P - - Yes No No
25 % verre 125-00 01 (1,5)
fibers
Polytetrafluoroethylene
Mikro-Technik Yes
115 with 5 % by weight glass DAN1228 DAN1228PL* DAN1228 PTFE-5% Glas Not for new design - - Yes No No
Plastic (1,5)
fibers

116 Polyester foils MYLAR I.C.I Z-23.701 Not for new design - No - No No No

117 Polymeric cellulose DAN127 TORTULIT T1 Schildkrot AG No longer to be used - No - No No No

PQ10058- PQ10058-300-
118 Polymeric cellulose TH5.577 TORTULIT T1 Schildkrot AG No longer to be used - No - No No No
300-00 00

Saint Gobain
Polytetrafluoroethylene Not for new design Yes
119 DAN128 DAN128* DAN129 Performance - - Yes No No
with woven fabric No longer available (1,5)
Plastics Paus

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 40 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 41 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s
Chemfilm PTFE Saint Gobain
Film, one side Perfomance IPSWL5.1129-
120 PTFE Strip ABS0635 ABS0635 WL5.1129 Not for new design - No - No No No
etched Type Plastics 02
0100E Pampus

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 41 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue N
Page 42 of 64
Table 3: Rods
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Aluminum tube+internal MEPLA-0-01- PQ10058- PQ10058-505-

1 ASNA2414 ASNA2414* Geberit SA Not for new design - Yes - Yes Yes No
and external PE 020MEP 505-00 01

Polycarbonate, flame PQ10058- PQ10058-162- Not for new design Yes

2 ASNA3614 ASNA3614* ASNB80383 EUROPLEX F4 Evonik - - Yes Yes No
retardant, transparent 162-00 03 No longer available (1,0)

Sabic
Polycarbonate, PQ10058- PQ10058-162- Not for new design,
3 ASNA3614 ASNA3614* ASNB80383 LEXAN 9600 Innovative - No - No Yes No
transparent 162-00 01 use DAN197A
Plastics

Not for new design,

Sabic
Polycarbonate, PQ10058- PQ10058-162- use DAN197A Yes
4 ASNA3614 ASNA3614* ASNB80383 LEXAN F2000 Innovative - - No Yes No
transparent 162-00 02 Product qualified for (1,0)
Plastics
thickness (e.g. 3mm)

PQ10058- PQ10058-021- Usability e.g. Stop

5 Polyacetal (POM) ASNA5117 ASNA5117* ERTACETAL H Quadrant EPP - No - No No No
021-00 01 knob
ERTACETAL C
6 Polyacetal (POM) ABR6-0199 ABR6-0199 ABR6-0199 Quadrant EPP - No - No No No
(POM-C)
TECAFORM
7 Polyacetal (POM) ABR6-0199 ABR6-0199 ABR6-0199 AH Ensinger - No - No No No
(POM-C)
PQ10058- PQ10058-013-
8 Polyamide 11 ASNA3527 ASNA3527* 3P - No - No No No
013-00 01

REHAU PQ10058- PQ10058-011- Not for new design

9 Polyamide 12 ASNA5081 ASNA5081* RAU-PA592 - No - Yes Yes No
Plastics 011-00 01 No longer available

ENSINGER IPS04-06-022-
10 Polyamide 6 ABS5936 ABS5936D* AIMS04-06-022 Tecamid 6 - No - No No No
GmbH 01
Röchling
11 Polyamide 6 LN9388 LN9388C* WL5.2203.3 SUSTAMID 6 Not for new design - No - Yes Yes No
Sustaplast
SUSTAMID 6 Röchling
12 Polyamide 6 cast LN9388 LN9388D* WL5.2204.3 - No - Yes Yes No
Guss Sustaplast

_______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2018. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 42 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 43 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

SUSTAMID Röchling Not for new design

13 Polyamide 610 LN9388 LN9388B* WL5.2202.3 - No - Yes Yes No
610 Sustaplast No longer available

IPS04-06-019-
14 Polyamide 66 ABS5936 ABS5936A* AIMS04-06-019 Nylatron 66 SA Quadrant EPP - No - Yes Yes No
03
Röchling IPS04-06-019-
15 Polyamide 66 ABS5936 ABS5936A* AIMS04-06-019 Sustamid 66 - No - Yes Yes No
Sustaplast 04
IPS04-06-019-
16 Polyamide 66 ABS5936 ABS5936A* AIMS04-06-019 Tecamid 66 Ensinger - No - Yes Yes No
01

PQ10058- PQ10058-002- no longer to be used,

17 Polyamide 66 ASNA3526 ASNA3526* ASNB80451 Nylatron 66 Quadrant EPP - No - Yes Yes No
002-00 03 use AIMS04-06-019

PQ10058- PQ10058-002- Not for new design,

18 Polyamide 66 ASNA3526 ASNA3526* ASNB80455 Nylatron 66 Quadrant EPP - No - Yes Yes No
002-00 03 use ABS5936

Not for new design,

Röchling use ABS5936
19 Polyamide 66 ASNA3526 ASNA3526* ASNB80455 SUSTAMID 66 - No - Yes Yes No
Sustaplast only codes:
1050/1120/1130/1150

Röchling Not for new design,

20 Polyamide 66 LN9388 LN9388A* WL5.2201.3 SUSTAMID 66 - No - Yes Yes No
Sustaplast use ABS5936

Not for new design,

use ABS5936
21 Polyamide 66 ABR6-0121 ABR6-0121 ABR6-0121 NYLON 6.6 DSM No longer to be used; - No - Yes Yes No
use Quadrant
Nylatron 66SA

Not for new design,

22 Polyamide 66 ABR6-0121 ABR6-0121 ABR6-0121 Nylatron 66SA Quadrant EPP - No - Yes Yes No
use ABS5936

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 43 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 44 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polyamide 66 with 30
Nylatron 66- PQ10058- PQ10058-004- Not for new design,
23 % by weight glass ASNA3539 ASNA3539* ASNB80455 Quadrant EPP - No - Yes Yes No
GF30 004-00 04 use ABS5933
fibers

Polyamide 66 with 30
Nylatron 66- PQ10058- PQ10058-004- no longer to be used,
24 % by weight glass ASNA3539 ASNA3539* ASNB80452 Quadrant EPP - No - Yes Yes No
GF30 004-00 04 use AIMS04-06-020
fibers

Polyamide 66 with 35
TECAMID 66-
25 % by weight glass LN9388 LN9388F* WL5.2206.3 Ensinger Not for new design - No - Yes Yes No
GF35
fibers

Polyamide 66 with 30% Nylatron 66-

26 ABS5933 ABS5933B* AIMS04-06-020 Quadrant EPP - No - No No No
by weight glass fibre GF30

Polyamide 66 with 35% Tecamid 66-

27 ABS5933 ABS5933A* AIMS04-06-020 Ensinger - No - No No No
by weight glass fibre GF35

IPS04-06-023-
28 Polyamide 66/MoS2 ABS5936 ABS5936B* AIMS04-06-023 Nylatron GS Quadrant EPP
02
Tecamid 66 IPS04-06-023-
29 Polyamide 66/MoS2 ABS5936 ABS5936B* AIMS04-06-023 Ensinger
MO 01

No longer to be used;
30 Polyamide 66/MoS2 ABR6-0124 ABR6-0124 ABR6-0124 Nylatron GS Polypenco use Quadrant - No - No No No
Nylatron GS

Not for new design,

31 Polyamide 66/MoS2 ABR6-0124 ABR6-0124 ABR6-0124 Nylatron GS Quadrant - No - No No No
use ABS5936

Duratron IPS04-06-014- Yes

32 Polyamideimide ABS5914 ABS5914A* AIMS04-06-014 Quadrant EPP - - Yes Yes No
T4203 01 (1,0)
Polyamideimide wear Duratron IPS04-06-015- Yes
33 ABS5914 ABS5914B* AIMS04-06-015 Quadrant EPP - - Yes Yes No
resistance T4301 01 (1,0)

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 44 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 45 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s
AIMS04-06- Ketron 1000 IPS04-06-004- Yes
34 Polyaryletherketone ABS5903 AIMS04-06-004 Quadrant EPP - - Yes Yes No
004 PEEK 02 (1,5)
AIMS04-06- IPS04-06-004- Yes
35 Polyaryletherketone ABS5903 AIMS04-06-004 TECAPEEK Ensinger - - Yes Yes No
004 01 (1,5)

Polyaryletherketone
TECAPEEK IPS04-06-017- Yes
36 with 30 % by weight ABS5707 ABS5707B* AIMS04-06-017 Ensinger - - Yes Yes No
CF30 01 (3,0)
carbon fibers

Polyaryletherketone
TECAPEEK IPSDAN1259- Yes
37 with 30 % by weight ABS5707 ABS5707A* DAN1259 Ensinger - - Yes Yes No
GF30 01 (3,0)
glass fibers

PQ10058- PQ10058-121- Yes

38 Polytetrafluoroethylene ASNA3535 ASNA3535* ASNB80501 PTFE pur 3P - - Yes No No
121-00 07 (1,5)

PQ10058- PQ10058-121- No longer to be used; Yes

39 Polytetrafluoroethylene ASNA3535 ASNA3535* ASNB80501 PTFE SEE - - Yes No No
121-00 08 use PQ10058-121-07 (1,5)

Mikro-Technik Not for new design, Yes

40 Polytetrafluoroethylene LN9406 LN9406* WL5.1129.20 PTFE - - Yes No No
Plastic use ASNA3535 (1,5)

Not for new design, Yes

41 Polytetrafluoroethylene LN9406 LN9406* WL5.1129.20 PTFE pur 3P - - Yes No No
use ASNA3535 (1,5)

Not for new design, Yes

42 Polytetrafluoroethylene ABR6-0126 Fluorocarbon - - Yes No No
use ASNA3535 (1,5)

Polytetrafluoroethylene FLUOROSINT Yes

43 ABR6-0187 Quadrant EPP - - Yes No No
mica filled 500 (1,5)

Polytetrafluoroethylene
PTFE chargé PQ10058- PQ10058-123- Yes
44 with 15 % by weight ASNA3530 ASNA3530* ASNB80501 3P - - Yes No No
15 % verre 123-00 03 (1,5)
glass fibers

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 45 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 46 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

Polytetrafluoroethylene
PTFE chargé PQ10058- PQ10058-125- Yes
45 with 25 % by weight 3P - - Yes No No
25 % verre 125-00 01 (1,5)
glass fibers

Polytetrafluoroethylene
Mikro-Technik Yes
46 with 5 % by weight DAN1228 DAN1228RD* DAN1228 PTFE-5% Glas Not for new design - - Yes No No
Plastic (1,5)
glass fibers

Polytetrafluoroethylene
Yes
47 with 60 % by weight DAN131 DAN131* DAN131 No longer to be used - - Yes No No
(1,5)
Bronze

PQ10058- PQ10058-013-
48 Polyamide 11 ASNA3527 ASNA3527* 3P - No - No No No
013-00 01

Röchling Not for new design,

49 Polyamide 6 LN29981 LN29981* WL5.2203.3 SUSTAMID 6 - No - Yes Yes No
Sustaplast use ABS5935

SUSTAMID 6 Röchling Not for new design,

50 Polyamide 6 cast LN29981 LN29981* WL5.2204.3 - No - Yes Yes No
Guß Sustaplast use ABS5935

SUSTAMID Röchling Not for new design

51 Polyamide 610 LN29981 LN29981* WL5.2202.3 - No - Yes Yes No
610 Sustaplast No longer available

IPS04-06-019- Not for new design,

52 Polyamide 66 ABS5937 ABS5937A* AIMS04-06-019 Nylatron 66 SA Quadrant EPP - No - Yes Yes No
03 use ABS5935

Röchling IPS04-06-019- Not for new design,

53 Polyamide 66 ABS5937 ABS5937A* AIMS04-06-019 Sustamid 66 - No - Yes Yes No
Sustaplast 04 use ABS5935

IPS04-06-019- Not for new design,

54 Polyamide 66 ABS5937 ABS5937A* AIMS04-06-019 Tecamid 66 Ensinger - No - Yes Yes No
01 use ABS5935

PQ10058- PQ10058-002- no longer to be used,

55 Polyamide 66 ASNA3526 ASNA3526* ASNB80451 Nylatron 66 Quadrant EPP - No - Yes Yes No
002-00 03 use AIMS04-06-019

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 46 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 47 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

PQ10058- PQ10058-002- Not for new design,

56 Polyamide 66 ASNA3526 ASNA3526* ASNB80455 Nylatron 66 Quadrant EPP - No - Yes Yes No
002-00 03 use ABS5935

Röchling Not for new design,

57 Polyamide 66 LN29981 LN29981* WL5.2201.3 SUSTAMID 66 - No - Yes Yes No
Sustaplast use ABS5935

IPS04-06-023- Not for new design,

58 Polyamide 66/MoS2 ABS5937 ABS5937B* AIMS04-06-023 Nylatron GS Quadrant EPP - No - No No No
02 use ABS5935

IPS04-06-023- Not for new design,

59 Polyamide 66/MoS2 ABS5937 ABS5937B* AIMS04-06-023 Tecamid 66 Mo Ensinger - No - No No No
01 use ABS5935

Polyamide 66 with 30% Nylatron 66- IPS04-06-020- Not for new design,
60 ABS5939 ABS5939B* AIMS04-06-020 Quadrant EPP - No - Yes Yes No
by weight glass fibre GF30 02 use ABS5932

Polyamide 66 with 35% Tecamid 66- IPS04-06-020- Not for new design,
61 ABS5939 ABS5939A* AIMS04-06-020 Ensinger - No - Yes Yes No
by weight glass fibre GF35 01 use ABS5932

Sabic
STAMILAN PQ10058- PQ10058-350-
62 Polyethylene TH5.585 Innovative No longer to be used - No - No No No
GRADE 1510 350-00 00
Plastics
Sabic
STAMILAN PQ10058- PQ10058-350-
63 Polyethylene TH5.585/1 Innovative No longer to be used - No - No No No
GRADE 1300 350-00 00
Plastics
Sabic
STAMILAN PQ10058- PQ10058-351-
64 Polypropylene TH5.586 Innovative No longer to be used - No - No No No
PU-V 351-00 00
Plastics
PQ10058- PQ10058-021- Usability e.g. Stop
65 Polyacetal (POM) ASNA5117 ASNA5117* ERTACETAL H Quadrant EPP - No - No No No
021-00 01 knob
ERTACETAL C
66 Polyacetal (POM) ABR6-0199 ABR6-0199 ABR6-0199 Quadrant EPP - No - No No No
(POM-C)
TECAFORM
ENSINGER
67 Polyacetal (POM) ABR6-0199 ABR6-0199 ABR6-0199 AH - No - No No No
GmbH
(POM-C)
Röchling
68 Polyamide 6 LN9393 LN9393* WL5.2203.3 SUSTAMID 6 Not for new design - No - Yes Yes No
Sustaplast
______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 47 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 48 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s
PQ10058- PQ10058-002-
69 Polyamide 66 NSA3702 NSA3702* ASNB80455 Nylatron 66 Quadrant EPP - No - Yes Yes No
002-00 03

No longer to be used;
70 Polyamide 66 ABR6-0121 ABR6-0121 ABR6-0121 NYLON 6.6 DSM use Quadrant - No - Yes Yes No
Nylatron 66SA

71 Polyamide 66 ABR6-0121 ABR6-0121 ABR6-0121 Nylatron 66 SA Quadrant EPP Not for new design - No - Yes Yes No

72 Polyamide 66 NYLON 6.6 DSM Z-14.301 Not for new design - No - Yes Yes No

No longer to be used;
73 Polyamide 66/MoS2 ABR6-0124 ABR6-0124 ABR6-0124 Nylatron GS Polypenco use Quadrant - No - No No No
Nylatron GS

74 Polyamide 66/MoS2 ABR6-0124 ABR6-0124 ABR6-0124 Nylatron GS QUADRANT - No - No No No

Sabic
STAMILAN PQ10058- PQ10058-350-
75 Polyethylene TH5.585 Innovative No longer to be used - No - No No No
GRADE 1510 350-00 00
Plastics
Sabic
STAMILAN PQ10058- PQ10058-350-
76 Polyethylene TH5.585/1 Innovative No longer to be used - No - No No No
GRADE 1300 350-00 00
Plastics
Sabic
STAMILAN PQ10058- PQ10058-351-
77 Polypropylene TH5.586 Innovative No longer to be used - No - No No No
PU-V 351-00 00
Plastics

REHAU PQ10058- PQ10058-352- No longer to be used

78 Polypropylene RAU-PP122 - No - No No No
Plastics 352-00 01 No longer available

Du Pont de PQ10058- PQ10058-121- No longer to be used, Yes

79 Polytetrafluoroethylene NSA3701 NSA3701* ASNB80501 TEFLON - - Yes No No
Nemours 121-00 06 use PQ10058-121-07 (1,5)

PQ10058- PQ10058-121- Yes

80 Polytetrafluoroethylene NSA3701 NSA3701* ASNB80501 PTFE pur 3P - - Yes No No
121-00 07 (1,5)

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 48 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 49 of 64
Standard Material Product Drawing IPS / Specific F F F
Line Material Standard Manufacturer Remarks S T HR
Designation Specification Designation Code Code (old) horiz 12s 60s

PQ10058- PQ10058-121- No longer to be used; Yes

81 Polytetrafluoroethylene NSA3701 NSA3701* ASNB80501 PTFE SEE - - Yes No No
121-00 08 use PQ10058-121-07 (1,5)

Not for new design, Yes

82 Polytetrafluoroethylene ABR6-0126 ABR6-0126 ABR6-0126 Fluorocarbon - - Yes No No
use NSA3701 (1,5)

No longer to be used, Yes

83 Polytetrafluoroethylene POLYPENCO ICO S.27.1010 - - Yes No No
use NSA3701 (1,5)

PQ10058- PQ10058-121- No longer to be used, Yes

84 Polytetrafluoroethylene HN 1321 DSM - - Yes No No
121-00 00 use NSA3701 (1,5)

PQ10058- PQ10058-121- No longer to be used, Yes

85 Polytetrafluoroethylene HN 1331 DSM - - Yes No No
121-00 00 use NSA3701 (1,5)

Polytetrafluoroethylene FLUOROSINT Yes

86 ABR6-0187 ABR6-0187 ABR6-0187 Quadrant EPP - - Yes No No
mica filled 500 (1,5)

Polytetrafluorothylene
BS6564-3- Yes
87 with 15 % by weight BS6564-3 BS6564-3 FL103 Fluorocarbon - - Yes No No
15A1-1 (1,5)
glass fibres

Polyvinylchloride I-D-N 14 Z- Plasticos

88 No longer to be used - No - No No No
copolymer 14.204 Zalmu S.A.
Polyvinylchloride MIL-I-631 type F MARIKEL MARIKEL PQ10058- PQ10058-051-
89 No longer to be used - No - No No No
copolymer Grade C class 1 CORP (USA) CORP (USA) 051-00 00
Polyvinylchloride MARIKEL MARIKEL PQ10058- PQ10058-051-
90 TH5.582 No longer to be used - No - No No No
copolymer CORP (USA) CORP (USA) 051-00 00
Polyvinylchloride MESANTO
91 Z-14.204 No longer to be used - No - No No No
copolymer IPBERIA S.A.

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 49 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 50 of 64
Table 4: Others

Material Individual Product

Line Material Standard Product Designation Manufacturer Drawing Code Specific Code Remarks
Specification Specification

Aluminium sheet coated with PQ10058-164- PQ10058-164- For further revision

1 ASNA3324 ASNB77550 POLYPLASTEX PANMETAL+TXT/CANVAS
decorative film 00 01 see TN A.007.10059

2 DA4.653.32 Fiberil T 1773 Carl Freudenberg

For further revision
3
Card web
DA4.653.32 Firet GmbH
see
TN A.007.10056
Oberflächenmatte Nr.
4 DA4.653.32 Gevetex
5
Expanded
Epanded PTFE, Type
5 Polytetrafluoroethylene ABR6-0127 WL Gore
1,2,3.
sealant tape
Low heat release acoustic PQ10058-600- PQ10058-600-
6 ASNA5049 ASNB77570 AERIA S/1 TEXAA

For further revision see

decorative weave 00 01

POLYVAC S3000/PPF PQ10058-104- PQ10058-104-

TN A.007.10059
7 POLYPLASTEX
2272 00 01
Low heat release decorative
ASNA3623 ASNB80541 PQ10058-104- PQ10058-104-
8 film (sheets) AERFILM-LHR/HA210 SCHNELLER
00 02

AIRDEC PQ10058-104- PQ10058-104-

9 ISOVOLTA
F1/HAA5538E 00 03

Low heat release decorative AERFILM-LHR HTE PQ10058-108- PQ10058-108-

10 SCHNELLER
film; self-adhesive (sheets) HA211 00 01
POLYVAC S3000/PPF
Low heat release perfored PQ10058-107- PQ10058-107-
11 210 SCHNELLER
decorative film (sheets) 00 01
perfored quality
Low heat release semirigid
PQ10058-106- PPQ10058-
12 textured decorative film with ASNA3691 ASNB80544 AERGLAS-LHR1 SCHNELLER
00 106-01
adhesive (sheets)

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 50 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 51 of 64

Material Individual Product

Line Material Standard Product Designation Manufacturer Drawing Code Specific Code Remarks
Specification Specification
Opaque PVCC thermoplastic
with one in situ PVF film on PQ10058-516- PQ10058-516- For further revision
13 ASNA5040 ARFORM-LHR SCHNELLER
one face 00 01 see TN A.007.10059
FST quality
PQ10058-012- PQ10058-012- For further revision
14 Polyamide 6/66 IPPLON DP100 AIRTECH
00 01 see TN A.007.10056
PQ10058-014- PQ10058-014- For further revision
15 Polyaprolactan PA115 Bostik Findley
00 01 see TN A.007.10054
PQ10058-163- PQ10058-163-
16 LEXAN 6020 Sabic Innovative Plastics
00 01
Polycarbonate coated with
ASNA3611 ASNB80393
decorative PVF (sheets)
PQ10058-163- PQ10058-163-
17 T/P0-060-RS 2350 ROWLAND

For further revision see TN

00 02

PQ10058-055- PQ10058-055-
18 PVC + Velcro VBED14CR72 STE PECAM
00 01

PQ10058-102- PQ10058-102-
19 TEDLAR TTY40BE5 Du Pont de Nemours

A.007.10059
PVF with both faces treated 00 02
for bonding (e=100—m) ASNA3612 ASNB77560
(rolls) PQ10058-102- PQ10058-102-
20 TEDLAR TMB20BE5 Du Pont de Nemours
00 04

21 DAN95 TEDLAR 100BG30 Du Pont de Nemours

PQ10058-100- PQ10058-100-
23 ASNB77560 TEDLAR TWH10BS3 Du Pont de Nemours
PVF with both faces treated 00 01
for bonding (e=25—m)
PQ10058-100- PQ10058-100-
24 FON 1.4601 TEDLAR 100BG30H Du Pont de Nemours
00 00

25 TEDLAR 100BG30TR Du Pont de Nemours Z-14.310

PVF with both faces treated

PQ10058-103- PQ10058-103-
26 for bonding (e=37,5—m) ASNA3622 ASNB77560 TEDLAR TWH15BL3 Du Pont de Nemours
00 01
(rolls)

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 51 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 52 of 64

Material Individual Product

Line Material Standard Product Designation Manufacturer Drawing Code Specific Code Remarks
Specification Specification

PQ10058-102- PQ10058-102-
27 TEDLAR TGB20BE3 Du Pont de Nemours
00 01
PVF with both faces treated
ASNA3612 ASNB77560
for bonding (e=50—m) (rolls)
PQ10058-102- PQ10058-102-
28 TEDLAR TMB20BE3 Du Pont de Nemours
00 03

POLYVAC TXT/PPF PQ10058-101- PQ10058-101-

29 ASNA3612 ASNB80540 POLYPLASTEX
708 00 02
PVF, textured decorative film
PQ10058-101- PQ10058-101-
30 with adhesive (rolls, sheets) ASNA3613 ASNB80540 AIRDEC F1 ISOVOLTA
00 01 For further
31 ASNA3625 ASNB80541
POLYVAV S3000/PPF
POLYPLASTEX
PQ10058-105- PQ10058-105- revision
708 00 01
see
32 PVF/PVC/PVF POLYVAC POLYPLASTEX Z-14.411 TN
33
Self-adhesive
ASNA3620 ASNB80501
PQ10058-119- PQ10058-119- A.007.10059
Polytetrafluoroethylene tape 00 01

PQ10058-052- PQ10058-052-
34 ASNA3528 STAMSKIN TOP LANTAL
00 03

Synthetic leather PQ10058-052- PQ10058-052-

35 Vinyl Union Cordual
00 01

Record 2 Olympiades- PQ10058-052- PQ10058-052-

36 STE TAULET
Novembal 00 02

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 52 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue N
Page 53 of 64
Table 5: Sorted by PQ Code

IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
No longer to be
used, use
PQ10058- AKULON M2- AIMS04-01-
PQ10058-001-00 Polyamide 6 TH5.593 Akulon - No - No No No Granulate
001-00 ZG 340 003
No longer
available
No longer to be
PQ10058- used, use
Polyamide 66 ASNA3526 ASNA3526* ASNB80451 Nylatron 66 Quadrant EPP - No - Yes Yes No Sheet
002-03 AIMS04-06-
019
Not for new
PQ10058-
Polyamide 66 ASNA3526 ASNA3526* ASNB80455 Nylatron 66 Quadrant EPP design, use - No - Yes Yes No Sheet
002-03
ABS5935
no longer to be
PQ10058- used, use Circular
Polyamide 66 ASNA3526 ASNA3526 ASNB80451 Nylatron 66 Quadrant EPP - No - Yes Yes No
002-03 AIMS04-06- rod
019
PQ10058-002-00 Not for new
PQ10058- Circular
Polyamide 66 ASNA3526 ASNA3526 ASNB80455 Nylatron 66 Quadrant EPP design, use - No - Yes Yes No
002-03 rod
ABS5936
no longer to be
PQ10058- used, use
Polyamide 66 ASNA3526 ASNA3526 ASNB80451 Nylatron 66 Quadrant EPP - No - Yes Yes No Flat rod
002-03 AIMS04-06-
019
Not for new
PQ10058-
Polyamide 66 ASNA3526 ASNA3526 ASNB80455 Nylatron 66 Quadrant EPP design, use - No - Yes Yes No Flat rod
002-03
ABS5935
PQ10058-
Polyamide 66 NSA3702 NSA3702 ASNB80455 Nylatron 66 Quadrant EPP - No - Yes Yes No Hollow rod
002-03
No longer
PQ10058- MARANYL available, use
PQ10058-003-00 Polyamide 66 ASNB80451 ASNB80451 ASNB80451 I.C.I - No - No No No Granulate
003-02 127 AIMS04-01-
003

No longer to be
use, use
PQ10058- AIMS04-01-
PQ10058-003-00 Polyamide 66 TH5.593/1 AKULON R-W Akulon - No - No No No Granulate
003-00 003
No longer
available

_______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2018. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 53 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 54 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
Not for new
ASNA4340 /
Polyamide 66, heat ZYTEL 103 Du Pont de design, use Yes
PQ10058- ASNB80455 ASNB80455 ASNB80455 - - Yes Yes No Granulate
stabilized HSL Nemours AIMS04-01- (3,2)
003-03
003
PQ10058-003-00
Not for new
ASNA4340 /
Polyamide 66, heat ZYTEL 103 Du Pont de design, use Yes
PQ10058- ASNB80451 ASNB80451 ASNB80451 - - Yes Yes No Granulate
stabilized HSL Nemours AIMS04-01- (3,2)
003-03
003
No longer
Polyamide 66 with
PQ10058- MARANYL AD available, use
28% by weight glass ASNA3536 ABR6-0122 ASNB80452 I.C.I - No - No No No Granulate
004-01 197 PQ10058-004-
fibers
03
Not for new
Polyamide 66 with 28 design
PQ10058- ZYTEL Du Pont de
% by weight glass ASNA3536 ASNA3536* ASNB80452 No longer to be - No - No No No Granulate
004-03 FR70G28HSL Nemours
fibers used, use
ASNB80455
Polyamide 66 with
PQ10058- ZYTEL Du Pont de Not for new
28% by weight glass ASNA3536 ASNA3536* ASNB80455 - No - No No No Granulate
PQ10058-004-00 004-03 FR70G28HSL Nemours design
fibers
Not for new
design
Polyamide 66 with
PQ10058- ZYTEL Du Pont de No longer to be
28% by weight glass ABR6-0122 ABR6-0122 ABR6-0122 - No - No No No Granulate
004-03 FR70G28V1 Nemours used; use
fibers
ZYTEL
FR70G25V0
Not for new
design
Polyamide 66 with
PQ10058- ULTRAMID No longer to be Yes
35% by weight glass ASNA3536 ASNA3536* ASNB80452 BASF - - No Yes No Granulate
004-02 A3X2G7 used, use (3,2)
fibers, flame retardant
AIMS04-01-
005
Not for new
Polyamide 66 with
PQ10058- ULTRAMID design, Yes
35% by weight glass ASNA3536 ASNA3536* ASNB80455 BASF - - No Yes No Granulate
004-02 A3X2G7 No longer to be (3,2)
fibers, flame retardant
used
PQ10058-004-00
Not for new
Polyamide 66 with
PQ10058- ULTRAMID design, Yes
35% by weight glass ASNA3536 ASNB80455 ASNB80455 BASF - - No Yes No Granulate
004-02 A3X2G7 No longer to be (3,2)
fibers, flame retardant
used

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 54 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 55 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
Polyamide 66 with Not for new
PQ10058- Nylatron 66- Circular
30% by weight glass ASNA3539 ASNA3536 ASNB80455 Quadrant EPP design, use - No - Yes Yes No
004-04 GF30 rod
fibers ABS5933
PQ10058-004-00 no longer to be
Polyamide 66 with
PQ10058- Nylatron 66- used, use Circular
30% by weight glass ASNA3539 ASNA3539 ASNB80452 Quadrant EPP - No - Yes Yes No
004-04 GF30 AIMS04-06- rod
fibers
020
PQ10058- RILSAN Not for new
Polyamide 11 ASNB80470 ASNB80470 ASNB80470 Arkema - No - No No No Granulate
007-03 BMNO TLD design
PQ10058-007-00
PQ10058- RILSAN Not for new
Polyamide 11 Arkema - No - No No No Granulate
007-01 BMNO design
No longer to be
PQ10058- use, use
Polyamide 12 TH5.593/3 Grilamid Ems-Chemie - No - No No No Granulate
008-00 AIMS04-01-
004A
PQ10058-008-00
Not for new
PQ10058- Evonik design, use
Polyamide 12 Vestamid - No - No No No Granulate
008-00 Degussa GmbH AIMS04-01-
004A
Not for new
PQ10058- Polyamide 6, design, use Yes
PQ10058-009-00 ASNA3615 ASNA3615* ASNB80455 GRILON BSV0 Ems-Chemie - - Yes Yes No Granulate
009-01 flame retardant AIMS04-01- (1,0)
031

PQ10058- No longer to be
PQ10058-010-00 Polyamide 6/MoS2 J-665M 3P - No - No No No Sheet
010-01 used
PQ10058- No longer
Polyamide 12 ASNA5081 ASNA5081* RAU-PA592 Rehau Plastics - No - Yes Yes No Sheet
011-01 available
Not for new
PQ10058-011-00
PQ10058- REHAU design Circular
Polyamide 12 ASNA5081 ASNA5081* RAU-PA592 - No - Yes Yes No
011-01 Plastics No longer rod
available
PQ10058-
PQ10058-011-00 Polyamide 12 ASNA3527 ASNA3527* Nylatron 12 Quadrant EPP - No - Yes Yes No Sheet
011-02
PQ10058- IPPLON
PQ10058-012-00
012-01
Polyamide 6/66
DP100
AIRTECH For further revision see TN A.007.10056 others
PQ10058-
Polyamide 11 ASNA3527 ASNA3527* 3P - No - No No No Sheet
013-01
PQ10058-013-00
PQ10058- Circular
Polyamide 11 ASNA3527 ASNA3527* 3P - No - No No No
013-01 rod
PQ10058-
PQ10058-013-00 Polyamide 11 ASNA3527 ASNA3527* 3P - No - No No No Flat rod
013-01

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 55 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 56 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
PQ10058-
PQ10058-014-00
014-01
Polyaprolactan PA115 Bostik Findley For further revision see TN A.007.10054 others
PQ10058- Du Pont de Not for new
PQ10058-020-00 Polyacetal (POM) DELRIN 150 - No - No No No Granulate
020-01 Nemours design
PQ10058- ERTACETAL
Polyacetal (POM) ASNA5130 ASNA5130* Quadrant EPP - No - No No No Sheet
021-01 H
PQ10058- ERTACETAL Usability e.g. Circular
PQ10058-021-00 Polyacetal (POM) ASNA5117 ASNA5117* Quadrant EPP - No - No No No
021-01 H Stop knob rod
PQ10058- ERTACETAL Usability e.g.
Polyacetal (POM) ASNA5117 ASNA5117* Quadrant EPP - No - No No No Hollow rod
021-01 H Stop knob
ASTM D 1784
PQ10058- Polyvinylchloride rigid Rehau-Plastics- No longer to be Yes
60T TypeIII Bip-Fromoplas - - Yes No No Granulate
050-00 (not plastified, PVC) Solvay used (1,5)
PQ10058-050-00 Grade 1
PQ10058- Polyvinylchloride rigid Rehau-Plastics- No longer to be
TH5.583 Bip-Fromoplas - Yes(1,5) - Yes No No Granulate
050-00 (not plastified, PVC) Solvay used
MIL-I-631 type
PQ10058- Polyvinylchloride MARIKEL MARIKEL No longer to be
F Grade C - No - No No No Hollow rod
051-00 copolymer CORP (USA) CORP (USA) used
PQ10058-051-00 class 1
PQ10058- Polyvinylchloride MARIKEL MARIKEL No longer to be
TH5.582 - No - No No No Hollow rod
051-00 copolymer CORP (USA) CORP (USA) used
PQ10058-
Synthetic leather Vinyl Union Cordual others
052-01
Record 2
PQ10058-
PQ10058-052-00 Synthetic leather Olympiades- STE TAULET others
052-02
Novembal
PQ10058- STAMSKIN
Synthetic leather ASNA3528 LANTAL others
052-03 TOP
PQ10058-
PQ10058-055-00 PVC + Velcro VBED14CR72 STE PECAM others
055-01
PVF with both faces
PQ10058-
treated for bonding FON 1.4601
TEDLAR Du Pont de For further revision see TN A.007.10059 others
100-00 100BG30H Nemours
(e=25—m)
PQ10058-100-00
PVF with both faces
PQ10058- TEDLAR Du Pont de
treated for bonding ASNB77560 others
100-01 TWH10BS3 Nemours
(e=25—m)
PVF, textured
PQ10058- decorative film with POLYVAC POLYPLASTE
PQ10058-101-00 ASNA3612 ASNB80540 others
101-02 adhesive (rolls, TXT/PPF 708 X
sheets)
PQ10058- PVF, textured
PQ10058-101-00
101-01 decorative film with
ASNA3613 ASNB80540 AIRDEC F1 ISOVOLTA For further revision see TN A.007.10059 others

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 56 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 57 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation
Code (old) I Ihoriz I 12 s
I 60 s
I I I
adhesive (rolls,
sheets)
PVF with both faces
PQ10058- TEDLAR Du Pont de
treated for bonding ASNA3612 ASNB77560 others
102-01 TGB20BE3 Nemours
(e=50—m) (rolls)
PVF with both faces
PQ10058- TEDLAR Du Pont de
treated for bonding ASNA3612 ASNB77560 others
102-02 TTY40BE5 Nemours
(e=100—m) (rolls)
PQ10058-102-00
PVF with both faces
PQ10058- TEDLAR Du Pont de
treated for bonding ASNA3612 ASNB77560 others
102-03 TMB20BE3 Nemours
(e=50—m) (rolls)
PVF with both faces
PQ10058- TEDLAR Du Pont de
treated for bonding ASNA3612 ASNB77560 others
102-04 TMB20BE5 Nemours
(e=100—m) (rolls)
PVF with both faces
PQ10058- TEDLAR Du Pont de
PQ10058-103-00 treated for bonding ASNA3622 ASNB77560 others
103-01 TWH15BL3 Nemours
(e=37,5—m) (rolls)
Low heat release POLYVAC
PQ10058- POLYPLASTE
decorative film ASNA3623 ASNB80541 S3000/PPF others
104-01 X
(sheets) 2272
Low heat release
PQ10058-104-00 PQ10058- AERFILM-
decorative film ASNA3623 ASNB80541 SCHNELLER others
104-02 LHR/HA210
(sheets)
Low heat release
PQ10058- AIRDEC
decorative film ASNA3623 ASNB80541 ISOVOLTA others
104-03 F1/HAA5538E
(sheets)

PVF, textured
POLYVAV
PQ10058- decorative film with POLYPLASTE
PQ10058-105-00 ASNA3625 ASNB80541 S3000/PPF others
105-01 adhesive (rolls, X
708
sheets)

Low heat release

PPQ10058- semirigid textured AERGLAS-
PQ10058-106-00 ASNA3691 ASNB80544 SCHNELLER others
106-01 decorative film with LHR1
adhesive (sheets)

Low heat release POLYVAC

PQ10058-
PQ10058-107-00
107-01
perfored decorative S3000/PPF SCHNELLER For further revision see TN A.007.10059 others
film (sheets) 210

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 57 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 58 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
perfored
quality
Low heat release
PQ10058- AERFILM-LHR
PQ10058-108-00 decorative film; self- SCHNELLER others
108-01 HTE HA211
adhesive (sheets)
Self-adhesive
PQ10058-
PQ10058-119-00 Polytetrafluoroethylen ASNA3620 ASNB80501 others
119-01
e tape
PQ10058- Acrylnitril-Butadien- No longer to be
TH5.587/1 NOVODUR PK Ineos - No - No No No Sheet
150-00 Styrol use
PQ10058-150-00
PQ10058- Acrylnitril-Butadien- BOLTARON No longer to be
TH5.587/2 Boltaron - No - No No No Sheet
150-00 Styrol 6800 use
No longer to be
Sabic
PQ10058- Polycarbonate, use, use
DAN198 DAN198 TH5.575/1 LEXAN 2034 Innovative - No - No No No Granulate
160-00 colored AIMS04-01-
Plastics
015
Sabic
PQ10058- Polycarbonate, Yes
ASNA3531 ASNA3531* ASNB80383 LEXAN F6000 Innovative - - Yes Yes No Sheet
160-03 colored (1,5)
Plastics
No longer to be
PQ10058-160-00 PQ10058- Polycarbonate, MAKROLON used, use
TH5.575 Evonik - No - No No No Sheet
160-00 colored 285 DAN197B or
ASNA3531
No longer to be
Sabic
PQ10058- Polycarbonate, used, use Yes
TH5.575/2 LEXAN F6000 Innovative - - Yes Yes No Sheet
160-00 colored DAN197B or (1,5)
Plastics
ASNA3531
PQ10058- Polycarbonate, flame EUROPLEX Yes
ASNA3531 ASNA3531* ASNB80383 Evonik - - Yes Yes No Sheet
160-04 retardant, colored F3 (1,5)
Not for new
Sabic
PQ10058- Polycarbonate, CM706 design, use
PQ10058-161-00 LEXAN 2014R Innovative - No - No No No Granulate
161-01 colored EN3535 AIMS04-01-
Plastics
015

Not for new

PQ10058- Polycarbonate, flame EUROPLEX Yes
PQ10058-162-00 ASNA3533 ASNA3533* ASNB80383 Evonik design,use - - Yes Yes No Sheet
162-03 retardant, transparent F4 (1,5)
DAN197A

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 58 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 59 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
Not for new
design, use
Sabic DAN197A
PQ10058- Polycarbonate,
ASNA3533 ASNA3533* ASNB80383 LEXAN 9600 Innovative Product - No - No Yes No Sheet
162-01 transparent
Plastics qualified for
small thickness
(e.g. 1,5mm)

Not for new

design, use
Sabic DAN197A
PQ10058- Polycarbonate, Yes
ASNA3533 ASNA3533* ASNB80383 LEXAN F2000 Innovative Product - - No Yes No Sheet
162-02 transparent (3,2)
Plastics qualified for
thickness (e.g.
3mm)
PQ10058-162-00
Not for new
PQ10058- Polycarbonate, flame EUROPLEX design Yes Circular
ASNA3614 ASNA3614* ASNB80383 Evonik - - Yes Yes No
162-03 retardant, transparent F4 No longer (1,5) rod
available
Sabic Not for new
PQ10058- Polycarbonate, Circular
ASNA3614 ASNA3614* ASNB80383 LEXAN 9600 Innovative design, use - No - No Yes No
162-01 transparent rod
Plastics DAN197A
Not for new
design, use
Sabic DAN197A
PQ10058- Polycarbonate, Yes Circular
ASNA3614 ASNA3614* ASNB80383 LEXAN F2000 Innovative Product - - No Yes No
162-02 transparent (3,2) rod
Plastics qualified for
thickness (e.g.
3mm)
Polycarbonate coated Sabic
PQ10058-
with decorative PVF ASNA3611 ASNB80393 LEXAN 6020 Innovative others
163-01
(sheets) Plastics
PQ10058-163-00
Polycarbonate coated
PQ10058- T/P0-060-RS
with decorative PVF ASNA3611 ASNB80393 ROWLAND For further revision see TN A.007.10059 others
163-02 2350
(sheets)

Aluminium sheet
PQ10058- POLYPLASTE PANMETAL+T
PQ10058-164-00 coated with ASNA3324 ASNB77550 others
164-01 X XT/CANVAS
decorative film
Polycarbonate with Not for new
PQ10058- MAKROLON Bayer Yes
PQ10058-167-00 10 % by weight glass ASNA3624 ASNa3624* design, use - - Yes Yes No Granulate
167-01 9415 MaterialScience (1,5)
fibers, flame retardant DAN1102
______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 59 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 60 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
Not for new
PQ10058- Polycarbonate, flame EUROPLEX Yes
PQ10058-168-00 ASNA3533 ASNA3533* ASNB80383 Evonik design,use - - Yes Yes No Sheet
168-01 retardant, transparent F7 (1,5)
DAN197A
No longer to be
PQ10058- Acrylic standard ALTUGLAS used, use
PQ10058-200-00 ASNA3534 ASNA3534* Atohaas No No - No No No Sheet
200-02 quality M33 PQ10058-200-
03
PQ10058- Acrylic standard ALTUGLAS
PQ10058-200-00 ASNA3534 ASNA3534* Atohaas No No - No No No Sheet
200-03 quality M70
PQ10058- Acrylic standard PLEXIGLAS No longer to be
PQ10058-200-00 TH5.589/2 Evonik Yes No - Yes Yes No Sheet
200-00 quality 233 used
Acrylic material -
No longer to be
Shock resistant,
PQ10058- used;
PQ10058-201-00 corrosion resistant TH5.589/3 PLEXIDUR Evonik No No - No No No Sheet
201-00 use Quadrant
and UV resistant
Nylatron GS
acrylic copolymer
MIL-P-25690
PQ10058- Acrylic material - Side PLEXIGLAS
PQ10058-201-01 DTD 900/6050 Evonik Yes No - Yes Yes No Sheet
201-01 window cockpit 249
AFS
unstrechted
Acrylic material -
PLEXIGLAS material,
PQ10058- Crack propagation MIL-PRF- MIL-PRF- MIL-PRF-
PQ10058-202-00 GS 249 Evonik improved Yes No - Yes Yes No Sheet
202-01 resistant acrylic 8184F 8184-I2 8184F
Type I, Class 2 moisture
quality
resistance
Not for new
PQ10058- PETERGLAS designNo
PQ10058-205-00 Acrylic for mirror ASNA3618 ASNA3618* Peterlite No No - No No No Sheet
205-01 VM1000 longer to be
used
PLEXIGLAS
PQ10058- Acrylic standard Class 0 Not as
PQ10058-206-00 ASNA3619 ASNA3619* GS 245 Evonik Yes No - Yes Yes No Sheet
206-01 quality good as class 2
CLASS 2
PLEXIGLAS
PQ10058- Acrylic standard Class 0 Not as
PQ10058-207-00 ASNA3619 ASNA3619* GS 245 Evonik Yes No - Yes Yes No Sheet
207-01 quality good as class 2
CLASS 0
PQ10058- Acrylic standard PLEXIGLASS
PQ10058-208-00 Evonik Yes No - Yes Yes No Sheet
208-01 quality GS 233
Extruded
PQ10058- Acrylic standard PLEXIGLAS
PQ10058-209-00 Evonik product, brown Yes No - Yes Yes No Sheet
209-01 quality XT/43:870
colored

PQ10058- No longer to be
PQ10058-300-00 Polymeric cellulose TH5.577 TORTULIT T1 Schildkrot AG - No - No No No Sheet
300-00 used

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 60 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 61 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
Sabic
PQ10058- STAMILAN No longer to be
PQ10058-350-00 Polyethylene TH5.585 Innovative - No - No No No Sheet
350-00 GRADE 1510 used
Plastics
Sabic
PQ10058- STAMILAN No longer to be
PQ10058-350-00 Polyethylene TH5.585/1 Innovative - No - No No No Sheet
350-00 GRADE 1300 used
Plastics
Sabic
PQ10058- STAMILAN No longer to be
PQ10058-350-00 Polyethylene TH5.585 Innovative - No - No No No Flat rod
350-00 GRADE 1510 used
Plastics
Sabic
PQ10058- STAMILAN No longer to be
PQ10058-350-00 Polyethylene TH5.585/1 Innovative - No - No No No Flat rod
350-00 GRADE 1300 used
Plastics
Sabic
PQ10058- STAMILAN No longer to be
PQ10058-350-00 Polyethylene TH5.585 Innovative - No - No No No Hollow rod
350-00 GRADE 1510 used
Plastics
Sabic
PQ10058- STAMILAN No longer to be
PQ10058-350-00 Polyethylene TH5.585/1 Innovative - No - No No No Hollow rod
350-00 GRADE 1300 used
Plastics
Sabic
PQ10058- STAMILAN No longer to be
PQ10058-351-00 Polypropylene TH5.586 Innovative - No - No No No Sheet
351-00 PU-V used
Plastics
Sabic
PQ10058- STAMILAN No longer to be
PQ10058-351-00 Polypropylene TH5.586 Innovative - No - No No No Flat rod
351-00 PU-V used
Plastics
Sabic
PQ10058- STAMILAN No longer to be
PQ10058-351-00 Polypropylene TH5.586 Innovative - No - No No No Hollow rod
351-00 PU-V used
Plastics
No longer to be
PQ10058- REHAU use
PQ10058-352-00 Polypropylene RAU-PP122 - No - No No No Granulate
352-01 Plastics No longer
available
No longer to be
PQ10058- used
PQ10058-352-00 Polypropylene RAU-PP122 Rehau Plastics - No - No No No Sheet
352-01 No longer
available
No longer to be
PQ10058- REHAU used
PQ10058-352-00 Polypropylene RAU-PP122 - No - No No No Hollow rod
352-01 Plastics No longer
available
PQ10058- No longer to be
PQ10058-400-00 Polyethersulfone TH5.576/2 VICTREX200 I.C.I - Yes(2,0) - Yes Yes No Granulate
400-00 used
PQ10058- No longer to be
PQ10058-400-00 Polysulfone TH5.576/1 Polysulfon Union Carbide - No - No No No Granulate
400-00 used
______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 61 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 62 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
PQ10058- No longer to be
PQ10058-400-00 Polysulfone TH5.576/1 Polysulfon Union Carbide - No - No No No Sheet
400-00 used
PQ10058- No longer to be Yes
PQ10058-501-00 Polyethersulfone Victrex 4800G SUMITOMO - - Yes Yes No Granulate
501-01 used (2,0)
Not for new
PQ10058- VICTREX Yes
PQ10058-502-00 Polyaryletherketone Victrex design, use - - Yes Yes No Granulate
502-01 PEEK 450G (1,5)
AIMS04-01-12
Not for new
Polyaryletherketone
PQ10058- VICTREX design, use Yes
PQ10058-503-00 with 30% by weight Victrex - - Yes Yes No Granulate
503-01 450GL30 AIMS04-01- (1,5)
glass fibers
006
Not for new
Low heat release Sabic design, use
PQ10058- Yes
PQ10058-504-00 thermoplastic ASNA3633 ASNA3633* ASNB80701 ULTEM 1613 Innovative ABS5607 - - Yes Yes Yes Sheet
504-01 (2,0)
material Plastics No longer
available
Not for new
Low heat release design, use
PQ10058- PES: Yes
PQ10058-504-00 thermoplastic ASNA3633 ASNA3633* ASNB80701 Evonik ABS5607 - - Yes Yes Yes Sheet
504-02 EUROPLEX (2,0)
material No longer
available
Aluminum
PQ10058- MEPLA-0-01- Not for new
PQ10058-505-00 tube+internal and ASNA2414 ASNA2414* Geberit SA - Yes - Yes Yes No Tube
505-01 020MEP design
external PE
Polyester (PBT)-
Sabic
PQ10058- Polycarbonate blend VALOX 553- Not for new
PQ10058-506-00 Innovative - No - No No No Granulate
506-01 with 30% by weight NOIR 7001 design
Plastics
glass fibers
Not for new
Sabic
PQ10058- design, use Yes
PQ10058-507-00 Polyetherimide ASNB80701 ASNB80701 ASNB80701 ULTEM 1000 Innovative - - Yes Yes No Granulate
507-01 AIMS04-01- (1,5)
Plastics
009
Not for new
Sabic
PQ10058- design, use Yes
PQ10058-507-00 Polyetherimide ASNB80701 ASNB80701 ASNB80701 ULTEM 1110F Innovative - - Yes Yes No Granulate
507-02 AIMS04-01- (1,5)
Plastics
009
Not for new
Polyaryletherketone
PQ10058- VICTREX design, use Yes
PQ10058-508-00 with 30 % by weight ASNB80801 ASNB80801 ASNB80801 Victrex - - Yes Yes No Granulate
508-01 450CA30 AIMS04-01- (1,5)
carbon fibers
007

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 62 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 63 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
Polyetherimide with Sabic Formerly
PQ10058- AIMS04-01- AIMS04-01- AIMS04-01-
PQ10058-509-00 25 % by weight EC005 Innovative STATKON - No - No No No Granulate
509-02 017 017 017
carbon fibers Plastics EC1005
Not for new
design, use
Polyetherimide with Sabic
PQ10058- AIMS04-01-
PQ10058-509-00 25 % by weight ASNA4352 ASNA4352 ASNA4352 ULTEM 7801 Innovative - No - No No No Granulate
509-01 017
carbon fibers Plastics
No longer
available
PQ10058- Madeira Air No longer to be
PQ10058-510-00 Polyurethan ABCO 2449 - No - No No No Granulate
510-01 Supply used
PQ10058- No longer to be
PQ10058-510-00 Polyurethan M25W1004-1 A&B Plastics - No - No No No Granulate
510-02 used
Not for new
design, use
PQ10058- EUROPLEX Yes
PQ10058-511-00 Polyethersulfone ASNA3681 ASNA3681* ASNB80701 Evonik ABS5607 - - Yes Yes Yes Sheet
511-01 PES LHR (2,0)
No longer
available
Not for new
Polyetherimide with Sabic
PQ10058- design, use Yes
PQ10058-512-00 30% by weight glass ASNA4303 ASNA4303 ASNA4303 ULTEM 2300 Innovative - - Yes Yes No Granulate
512-02 AIMS04-01- (1,5)
fibers Plastics
023
IPS04-01-
Polyetherimide with Sabic
022-01 / AIMS04-01- AIMS04-01- AIMS04-01- Yes
PQ10058-513-00 20% by weight glass ULTEM 2210 Innovative Enhanced flow - - Yes Yes No Granulate
PQ10058- 022 022 022 (1,5)
fibers Plastics
513-01
Not for new
design, use
Polyetherimide with Sabic AIMS04-01-
PQ10058- Yes
PQ10058-513-00 20% by weight glass ASNA4305 ASNA4305 ASNA4305 ULTEM 2210 Innovative 022 - - Yes Yes No Granulate
513-01 (1,5)
fibers Plastics No longer to be
used
Enhanced flow
Not for new
Polyetherimide with Sabic design, use
PQ10058- Yes
PQ10058-514-00 30% by weight glass ASNA4306 ASNA4306 ASNA4306 ULTEM 2310 Innovative AIMS04-01- - - Yes Yes No Granulate
514-01 (1,5)
fibers Plastics 023
Enhanced flow
Not for new
Polyetherimide with
Sabic design, use
PQ10058- 30% by weight glass ULTEM CRS Yes
PQ10058-515-00 ASNA4307 ASNA4307 ASNA4307 Innovative AIMS04-01- - - Yes Yes No Granulate
515-01 fibers; enhanced 5311 (1,5)
Plastics 024
chemical resistance
Enhanced flow
______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 63 of 64
 AIRBUS
PROCESS AND MATERIAL SPECIFICATION
TN A.007.10058
AIRBUS Issue P
Page 64 of 64
IPS /
Standard Material Product F F F
Drawing Code Specific Material Standard Manufacturer Remarks S T HR Shape
Designation Specification Designation horiz 12 s 60 s
Code (old)
Opaque PVCC
thermoplastic with
PQ10058-
PQ10058-516-00
516-01
one in situ PVF film ASNA5040 ARFORM-LHR SCHNELLER For further revision see TN A.007.10059 others
on one face
FST quality

Not for new

Low heat release Sabic
PQ10058- design, use Yes
PQ10058-518-00 thermoplastic ASNB80701 ASNB80701 ASNB80701 ULTEM 9075 Innovative - - Yes Yes Yes Granulate
518-01 AIMS04-01- (2,0)
material Plastics
001

Not for new

design, use
PQ10058- Polycarbonate, XANTAR DAN197B or
PQ10058-519-00 ASNA3614 ASNA3614* ASNA3614 Quadrant EPP - No - No No No Sheet
519-01 colored FC25R ASNA3531
No longer
available
Not for new
PQ10058- Polycarbonate, XANTAR design, use
PQ10058-520-00 DSM - No - No No No Granulate
520-01 colored F25R AIMS04-01-
015
Not for new
design, use
Polyaryletherketone
PQ10058- VICTREX AIMS04-01- Yes
PQ10058-521-00 with 30% by weight ASNA4346 ASNA4346 ASNA4346 Victrex - - Yes Yes No Granulate
521-01 150CA30 007 (1,5)
carbon fibers
No longer to be
used
Not for new
Polyaryletherketone
PQ10058- VICTREX design, use Yes
PQ10058-522-00 with 30% by weight ASNA5139 ASNA5139* ASNA4347 Victrex - - Yes Yes No Granulate
522-01 150GL30 AIMS04-01- (1,5)
glass fibers
006
Low heat release
PQ10058-
PQ10058-600-00
600-01
acoustic decorative ASNA5049 ASNB77570 AERIA S/1 TEXAA For further revision see TN A.007.10059 others
weave
Polyamide 6 with
PQ10060- 4442/300 No longer to be
PQ10060-201-00 30% by weight glass TH5.594/1 BASF - No - No No No Granulate
201-01 (silicate filled) used
fibers

______________________________________________________________________________________________________________________________________________________________________________
¤Copyright AIRBUS SE. 2019. All rights reserved

A00710058 | PMS 02-12-00 AUG 01/22

Page 64 of 64