e e

GLUCOSE, AU400/AU400 /AU640/AU640 Application GLUCOSE, AU600 Application

System Reagent: OSR6x21 Reagent ID: 021 System Reagent: OSR6x21 Reagent ID: 021

Specific Test Parameters Specific test parameters

General LIH ISE Range
Test No # Test name GLUC ∇ Sample type Ser ∇ Page 1/2
Test Name: GLUC ∇ < > Type: Serum ∇ Operation: Yes ∇
Sample vol. 2 Dil. vol 0 μl Min. OD Max. OD
Sample: Volume 2 μL Dilution 0 μL Pre-Dilution Rate: 1 Reagent 1 vol 50 Dil. vol 150 μl L H
Reagents: R1 Volume 50 μL Dilution 150 μL Min OD Max OD Reagent 2 vol 25 Dil. vol 25 μl Reagent OD limit
R2 Volume 25 μL Dilution 25 μL L H Fst. L -0.1 Fst. H 0.5
Reagent OD limit: Wave Main 340 Sub 380 ∇ Lst. L -0.1 Lst. H 0.5
Wavelength: Pri. 340 ∇ Sec. 380 ∇ First L -0.1 First H 0.5 Method END ∇ Dynamic range
Method: END ∇ Last L -0.1 Last H 0.5 Reaction + ∇ L 10* H 800*
Reaction slope: + ∇ Dynamic Range: Point 1 Fst 0 Lst 27 Correlation factor A 1
Measuring Point 1: First 0 Last 27 L 10* H 800* Point 2 Fst 0 Lst 10 B 0
Measuring Point 2: First 0 Last 10 Correlation Factor:
Linearity : % A 1 B 0
No Lag Time: ∇ On-board stability period: 30 Linearity Fst % Sec %
No lag time ∇ On-board stability period 30
Select using Space key, or select from list displayed by Guide key
Specific Test Parameters
General LIH ISE Range Test No # Test name GLUC ∇ Sample type Ser ∇ Page 2/2

Test Name: GLUC ∇ < > Type: Serum ∇ Level L Level H

Value/flag # ∇ # #
Value/Flag: # ∇ Level L: # Level H: # Normal range
Normal Ranges: Age L Age H Sex Age L Age H L H
Sex Year Month Year Month L H 1 # ∇ # Y # M # Y # M→ # #
ο 1. # ∇ # # # # # # 2 # ∇ # Y # M # Y # M→ # #
ο 2. # ∇ # # # # # # 3 # ∇ # Y # M # Y # M→ # #
ο 3. # ∇ # # # # # # 4 # ∇ # Y # M # Y # M→ # #
ο 4. # ∇ # # # # # # 5 # ∇ # Y # M # Y # M→ # #
ο 5. # ∇ # # # # # # 6 # ∇ # Y # M # Y # M→ # #
ο 6. # ∇ # # # # # # 7 Non select # #
7. None Selected # # 8 Out of range # #
8. Out of Range L H # # L H
Panic Value: # # Unit: mg/dL* Decimal places: # Panic value # #
Select the function using the Function key or the Mouse
Calibration specific
Calibration Specific
General ISE Test No # Test name GLUC ∇
Test Name: GLUC ∇ < > Type Serum ∇ Cal type 8 AB ∇ Count #
Formula 1 Y=AX+B ∇ Process Conc ∇
Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # Process: CONC ∇
Selection calibrator
Cal No OD Conc Factor/OD-L Factor/OD-H
Cal. No. OD CONC Factor/OD-L Factor/OD-H
Point 1 # ∇ † 416* 694*
Point 1: # † 416* 694*
Point 2 ∇
Point 2:
Point 3 ∇
Point 3:
Point 4 ∇
Point 4:
Point 5: Point 5 ∇
Point 6: Point 6 ∇
Point 7: Point 7 ∇
1-point cal. point
1-Point Cal. Point: ο With CONC-0
MB type factor
MB Type Factor: Calibration Stability Period: 30 Calibrator stability period 30
Select the function using the Function key or the Mouse
# User defined # User defined
† System Calibrator Cat. No.: DR0070 † System Calibrator Cat. No.: DR0070
* Values set for working in mg/dL. To work in SI units (mmol/L) divide by 18 * Values set for working in mg/dL. To work in SI units (mmol/L) divide by 18

BSSA6121.01
2009-08
GLUCOSE, AU2700/AU5400 Application GLUCOSE, AU680/AU480 Application
System Reagent: OSR6x21 Reagent ID: 021 System Reagent: OSR6x21 Reagent ID: 021
Parameters Specific Test Parameters
Specific Test Parameters General LIH ISE HbA1c Calculated Test Range
General LIH ISE Range
Test Name: GLUC ∇ < > Type: Serum ∇ Operation Yes ∇
Test Name: GLUC ∇ < > Type: Serum ∇ Operation: Yes ∇

Sample: Volume 1.6 Dilution 0 Pre-Dilution Rate: 1 Sample Volume 1.6 μL Dilution 0 μL OD Limit
μL μL
Pre-Dilution Rate 1 ∇ Min.OD Max.OD
Reagents: R1 Volume 40 μL Dilution 120 μL Min OD Max OD
Rgt. Volume R1(R1-1) 40 μL Dilution 120 μL Reagent OD Limit
R2 Volume 20 μL Dilution 20 μL L H
First Low -0.1 High 0.5
Reagent OD limit:
Last Low -0.1 High 0.5
Wavelength: Pri. 340 ∇ Sec. 660 ∇ First L -0.1 First H 0.5
R2(R2-1) 20 μL Dilution 20 μL
Method: END ∇ Last L -0.1 Last H 0.5
Dynamic Range Low 10* High 800*
Reaction slope: + ∇ Dynamic Range: Common Rgt. Type Noneф Name ф Correlation Factor A 1 B 0
Measuring Point 1: First 0 Last 27 L 10* H 800* Wavelength Pri 340 ∇nm Sec. 660 ∇nm Factor for Maker A 1 B 0
Measuring Point 2: First 0 Last 10 Correlation Factor: Method END ∇
Linearity : % A 1 B 0 Reaction Slope + ∇ Onboard Stability Period 30 Day 0 Hour
No Lag Time: ∇ On-board stability period: 30 Measuring Point1 First 0 Last 27 LIH Influence Check # ∇
Measuring Point2 First 0 Last 10 Lipemia ++++ ∇
Linearity Limit % Icterus ++++ ∇
Specific Test Parameters Lag Time Check ∇ Hemolysis +++++ ∇
General LIH ISE Range
Parameters Specific Test Parameters
Test Name: GLUC ∇ < > Type: Serum ∇ General LIH ISE HbA1c Calculated Test Range

Value/Flag: # ∇ Level L: # Level H: # Test Name: GLUC ∇ < > Type: Serum ∇
Normal Ranges: Age L Age H
Sex Year Month Year Month L H Value/Flag: # ∇ Low High
ο 1. # ∇ # # # # # # Level # # Panic Value
Specificl Ranges: From To Low High
ο 2. # ∇ # # # # # #
Sex Year Month Year Month Low High # #
ο 3. # ∇ # # # # # #
ο 1. # ∇ # # # # # #
ο 4. # ∇ # # # # # # ο 2. # ∇ # # # # # #
ο 5. # ∇ # # # # # # ο 3. # ∇ # # # # # #
ο 6. # ∇ # # # # # # ο 4. # ∇ # # # # # #
7. None Selected # # ο 5. # ∇ # # # # # #
8. Out of Range L H # # ο 6. # ∇ # # # # # #
Panic Value: # # Unit: mg/dL* Decimal places: # 7. No demographics # #
8. Not within expected values # #
Unit mg/dL* Decimal Places #
Parameters Calibration Parameters
Calibration Specific
Calibrators Calibration Specific STAT Table Calibration
General ISE
General ISE
Test Name: GLUC ∇ < > Type Serum ∇ Test Name: GLUC ∇ < > Type Serum ∇ ο Use Serum Cal.
Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # Process: CONC ∇ Calibration Type: AB ∇ Formula: Y=AX+B ∇ Counts: # ∇
<Calibrator Parameters> Factor Range
Cal. No. OD CONC Factor/OD-L Factor/OD-H Calibrator OD Conc Low High Slope Check None ∇
Point 1: # † 320* 480* Point 1: # ∇ † 320* 480*
Point 2: Point 2: ∇ Allowance Range Check
Point 3: Point 3: ∇
Point 4: Point 4: ∇ ο Reagent Blank
Point 5: Point 5: ∇ ο Calibration
Point 6: Point 6: ∇
Point 7: Point 7 ∇ Advanced Calibration
1-Point Cal. Point: ο Advanced Calibration: # ∇ Point 8 ∇ Operation Yes ∇
Point 9 ∇
MB Type Factor: Calibration Stability Period: 30
Point 10 ∇ Interval (RB/ACAL) Lot/Lot ∇
<Point Cal. For No. of Correction Points ∇ Use Master Curve ∇ ο Lot Calibration
# User defined. Master Curve> OD Range
Calibrator OD Conc Low High Stability
† System Calibrator Cat. No.: DR0070
* Values set for working in mg/dL. To work in SI units (mmol/L) divide by 18 Point-1 ∇ Reagent Blank 30 Day 0 Hour
ф AU680 Point-2 ∇ Calibration 30 Day 0 Hour
MB Type Factor: 1-Point Calibration Point ∇ ο with Conc-0

BSSA6121.01
2009-08