TECHNICAL SPECIFICATIONS
KEY SPECIFICATIONS DATA KEY SPECIFICATIONS DATA
QH441 CONE CRUSHER
Crusher type
Speed
Sandvik CH440
327 rpm to 346 rpm
Power pack
Engine type Stage 3A / Tier 3 CAT C13 Acert or
ENGINEERING IN MOTION
Stage 3B / Tier 4i CAT C13 Acert or
Feed opening 215 mm / 8 ½” Stage 4 / Tier4 Final CAT C13 Acert
CSS range 8 - 48 mm / 5/16” - 1 ⅞” Engine power 328 kW / 440 hp
Available with optional hanging screen system.
Drive PT Tech 14” Wet Clutch with PTO Diesel tank size 990 litres / 262 USG
Drive belts 10 SPC Single Belts Hydraulic tank size 990 litres / 262 USG
Note. All weights and dimensions are for standard units only
17.21 m / 56’ 5 5/8” 2.95 m / 9’ 8 ½”
3.8 m / 12’ 5 ½”
Featuring the proven, high performing Sandvik CH440 Hydrocone. 16.56 m / 54’ 4” 3.32 m / 10’ 10 ½”
B5-331 ENG rev2 © Sandvik Construction 2016 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries
4.91 m / 16’ 1”
5 – CLP Liners are designed to keep 1 – Modular design with filler ring for
maximum feed size into the cone ultimate flexibility
throughout the wear life of the – Unique crusher design
liners. All liner options fit in one eliminates the need for anti-spin
top shell device on head
– Constant liner opening results in
constant production
performance throughout liner Standard weight 50,488 kg / 111,307 lbs
life 1
2
5 – Main Shaft is supported from
2
both the Top and Bottom giving
additional strength
6 – Longer crushing chamber due
to top & bottom support which 6
gives superior product shape in
the chamber
3 – Helical drive gear arrangement
for maximum durability and
3 smooth, quiet operation
2
7
7 – Bush arrangement has multiple
settings to suit the required
application
– Eccentric throw can be changed 4 – Single piston design for gap
by simply turning the bush. The 4 setting and over load protection.
throw range is the most CSS can also be adjusted whilst
extensive in the market. crushing
CONSTRUCTION.SANDVIK.COM
5 The material in this brochure is of general application for information and guidance only, and no representation or warranty is made or given by the manufacturer that its products will be suitable for a customer’s particular purpose and enquiry should always
be made of the manufacturer to ensure such suitability. Whilst every effort has been made in the preparation of this document to ensure its accuracy, the manufacturer assumes no liability resulting from errors or omissions in this document, or from the use
or interpretation of the information contained herein. The manufacturer reserves the right to make changes to the information in this brochure and the product design without reservation and without notification to users.
Q H441 CON E C R U S H E R
2 Feeder 4 Power pack
– Automated variable speed 1200 mm / – 328 kW / 440 hp emissions compliant engine
3
QH441 CONE CRUSHER 47” wide feed conveyor to ensure maximum Cone – Direct drive to ensure maximum power delivery
production, reduction and shape – Fitted with the proven CH440 Sandvik cone for strength and – Variable crusher speed via the engine to
– Bridge Coil (up and over) metal detector reliability manipulate product gradation
– Equipped with Hydroset CSS regulation system for optimum 5 Cooling fan
fitted to the feed conveyor providing – Easy access for service and maintenance
ENGINEERING IN MOTION
production & protection – Hydraulically driven cooling fan with auto
optimum stability and controlled detection – Ground level drainage points
– Choice of 6 concaves and a CSS range of 8 mm to 48 mm reverse to back flush dust from radiator
– Large capacity diesel tank 990 litre / 262 USG
accepting a feed size of up to 215 mm / 8 ½”
– Various bush settings available to optimize product gradation
and capacity
– World renowned Constant Liner Performance system for
optimum wear life of the liners
– Hydraulic over load system for tramp material
1 Hopper
– Wear resistant liner plates fitted as
standard
– Hydraulically raised and lowered for
transport
– Hydraulic folding hopper extensions for
increased hopper capacity and rear
2
loading (optional)
3
6
4
5
6 Main conveyor
KEY SPECIFICATIONS DATA VERSATILE SOLUTION 1 – 1200 mm / 47” wide main conveyor with a
discharge height of 3739 mm / 12’ 3 ¼”
Equipment Sandvik CH440 Hydrocone – Dust suppression spray bars and canvas
The QH441 is one of the most flexible and heavy 7
covers fitted as standard
Maximum feed size 215 mm / 8 ½” duty cone crushers in the market today. Specifically
aimed at large scale aggregates producers, the QH441
Engine C13 Acert 328 kW / 440 hp
has been designed utilizing the latest technology to
Transport 17.21 m / 56’ 5 ⅝” (l) ensure uninterrupted productivity and minimal operator 10 Chassis
dimensions 2.95 m / 9’ 8 ½” (w) – Heavy duty fabricated chassis on a 10 8
intervention. tracked frame
3.8 m / 12’ 5 ½” (h)
– Hydraulic legs for increased stability and
Weight 50,488 kg / 111,307 lbs Powered by a diesel engine with direct drive to ensure servicing capabilities
maximum power and fuel efficiency, it sets new
7 Hanging screen system (optional)
standards in throughput, reduction ratios and gives
9 – 4 x 1.5 m / 13’ x 5’ single deck screen for
excellent product shape. Available with a choice of 8 Control system recirculation back to feed conveyor, or
six crushing chambers and a variety of bush settings, – Highly efficient hydraulic and electric stockpiling through 90˚ rotation of oversize
system provide ultimate system control conveyor to produce two products
it stands as one of the most reliable, versatile and Tracks – A full colour PLC screen with a simple
9 – Hydraulic operation from recirculating to
productive cone crushers in the market today. – 500 mm / 19 ¾” wide tracks driven by operator interface combined with a level stockpiling position
proportional umbilical control sensor above the crushing chamber
– Radio remote (optional) and load control system allows for a fully
STANDARD FEATURES INCLUDE: automated crushing process
– Emissions compliant 328 kW / 440 hp engine for
powerful cost efficient performance
– Variable crusher speed via the engine to manipulate STANDARD FEATURES
product gradation
– Equipped with a hydroset CSS regulation system
that provides overload protection, optimizes
production and keeps track of liner wear
Camera and level sensor to ensure continuous feed Bridge coil metal detector for controlled detection Steel pipework for better heat dissipation Easy access to the engine compartment User friendly PLC control system with colour screen Direct drive for maximum fuel efficiency
2 4
