Table of Contents

Question 1: What is "Hot Work" in the context of safety? .................................................... 4

Question 2: Why is Hot Work considered high-risk in terms of safety?.............................. 4
Question 3: What is a common precautionary measure before starting Hot Work? ........ 5
Question 4: What type of fire extinguisher is typically recommended for use during
Hot Work activities? ..................................................................................................................... 5
Question 5: What is the purpose of a "Hot Work Safety Checklist"? .................................. 6
Question 6: In Hot Work safety, what does the acronym "OSHA" stand for? ................... 6
Question 7: What is the primary purpose of a "Fire Watch" during Hot Work? ............... 7
Question 8: What is the recommended clothing for workers involved in Hot Work? ...... 7
Question 9: Which of the following is NOT a typical hazard associated with Hot Work? 8
Question 10: What is the purpose of "Permit to Work" for Hot Work?.............................. 8
Question 11: What is a common precautionary measure to prevent heat stress during
Hot Work? ...................................................................................................................................... 9
Question 12: What is a "Fire Blanket," and how is it used in Hot Work safety? ................ 9
Question 13: What is the recommended distance for flammable materials to be kept
away from Hot Work operations? ............................................................................................10
Question 14: Why is it essential to shut off gas cylinders when not in use during Hot
Work? ............................................................................................................................................10
Question 15: What is the primary goal of "Ventilation" during Hot Work?.....................11
Question 16: What is the primary purpose of "Hot Work Training"? ................................11
Question 17: What is the primary objective of a "Hot Work Permit"? ..............................12
Question 18: In Hot Work safety, what does the term "Flash Point" refer to? ................12
Question 19: What is the purpose of "Fire-resistant Barriers" in Hot Work safety? .......13
Question 20: What is the recommended method for extinguishing a person whose
clothing has caught fire during Hot Work? ............................................................................13
Question 21: What is the purpose of "Gas Monitoring" during Hot Work? .....................14
Question 22: What is the primary goal of "Fire Safety Training" in Hot Work safety? ..14
Question 23: What is the purpose of "Hot Work PPE" (Personal Protective Equipment)?
........................................................................................................................................................15
Question 24: Why is it important to keep a fire watch for at least 30 minutes after Hot
Work is completed? ....................................................................................................................15
Question 25: What is the primary purpose of "Hot Work Hazard Assessment"? ............16
Question 26: What is the recommended way to store flammable materials during Hot
Work? ............................................................................................................................................16
Question 27: What is the purpose of "Hot Work Permits" having an expiration time? .17
Question 28: What is the primary goal of "Hot Work Precautions"? ................................17
Question 29: What is the primary purpose of "Fire Extinguishing Equipment" during
Hot Work? ....................................................................................................................................18
Question 30: What is the recommended distance for fire extinguishers to be placed
from Hot Work areas? ................................................................................................................18
Question 31: What is the purpose of "Hot Work Area Signage"? ......................................19
Question 32: During Hot Work, why is it essential to have an emergency plan in place?
........................................................................................................................................................19
Question 33: What is the primary goal of "Fire Alarms" in Hot Work safety? .................20
Question 34: Why is it crucial to inspect welding and cutting equipment before Hot
Work begins? ...............................................................................................................................20
Question 35: What is the primary purpose of "Hot Work Training Certification"? ........21
Question 36: What is the recommended distance for flammable materials to be stored
from Hot Work equipment? ......................................................................................................21
Question 37: What is the purpose of "Fire Watch Training" for individuals assigned as
fire watchers during Hot Work? ...............................................................................................22
Question 38: Why is it essential to maintain clear access to fire exits during Hot Work?
........................................................................................................................................................22
Question 39: What is the purpose of a "Hot Work Log"? ....................................................23
Question 40: What is the recommended method for handling gas cylinders during Hot
Work? ............................................................................................................................................23
Question 41: What is the purpose of "Fire-resistant Curtains" during Hot Work? .........24
Question 42: What is the purpose of "Fire-resistant Tarpaulins" during Hot Work? .....24
Question 43: What is the purpose of "Fire-resistant Tarpaulins" during Hot Work? .....25
Question 44: Why is it important to keep a clear path to emergency exits during Hot
Work? ............................................................................................................................................25
Question 45: What is the primary purpose of "Hot Work Equipment Inspection"? .......26
Question 46: What is the recommended procedure for disposing of hot slag and other
debris generated during Hot Work? ........................................................................................26
Question 47: What is the primary goal of "Gas Cylinder Storage" during Hot Work? ...27
Question 48: Why is it important to wear appropriate eye protection during Hot Work?
........................................................................................................................................................27
Question 49: What is the recommended method for securing gas cylinders during Hot
Work? ............................................................................................................................................28
Question 50: What is the primary purpose of "Hot Work Safety Audits"? .......................28
THANK YOU .................................................................................................................................29
Question 1: What is "Hot Work" in the context of safety?

A) Work performed in extreme temperatures

B) Work involving welding, cutting, or other activities that generate heat, sparks, or
flames

C) Work done during the summer months

D) Work that requires workers to wear heavy clothing

Answer: B) Work involving welding, cutting, or other activities that generate

heat, sparks, or flames

Explanation: Hot Work refers to work activities that involve welding, cutting, or
other processes that generate heat, sparks, or flames, posing fire hazards.

Question 2: Why is Hot Work considered high-risk in terms of

safety?

A) Because it is performed in cold environments

B) Because it is rarely done in the workplace

C) Because it can easily lead to fires and explosions

D) Because it is a low-priority task

Answer: C) Because it can easily lead to fires and explosions

Explanation: Hot Work is considered high-risk because it has the potential to

easily lead to fires and explosions if not performed with proper precautions.
Question 3: What is a common precautionary measure before
starting Hot Work?

A) Turning off all ventilation systems

B) Wearing shorts and a t-shirt for comfort

C) Obtaining a Hot Work permit and conducting a risk assessment

D) Using a large fan to blow away sparks

Answer: C) Obtaining a Hot Work permit and conducting a risk assessment

Explanation: A common precautionary measure before starting Hot Work is

obtaining a Hot Work permit and conducting a risk assessment to assess
potential hazards.

Question 4: What type of fire extinguisher is typically recommended

for use during Hot Work activities?

A) Class A fire extinguisher

B) Class B fire extinguisher

C) Class C fire extinguisher

D) Class K fire extinguisher

Answer: B) Class B fire extinguisher

Explanation: Class B fire extinguishers are typically recommended for use

during Hot Work activities because they are designed to extinguish fires
involving flammable liquids, gases, and combustible materials.
Question 5: What is the purpose of a "Hot Work Safety Checklist"?

A) To list the names of workers involved in Hot Work

B) To ensure that workers are wearing appropriate clothing

C) To identify and mitigate potential hazards before starting Hot Work

D) To record the temperature of the work area

Answer: C) To identify and mitigate potential hazards before starting Hot Work

Explanation: A Hot Work Safety Checklist is used to identify and mitigate

potential hazards before starting Hot Work, ensuring a safe work environment.

Question 6: In Hot Work safety, what does the acronym "OSHA"

stand for?

A) Occupational Safety and Health Administration

B) Overheated Sparks and Hazards Awareness

C) Operation of Safety Hot Appliances

D) Occupational Safety Handbook for Asbestos

Answer: A) Occupational Safety and Health Administration

Explanation: In Hot Work safety, "OSHA" stands for Occupational Safety and
Health Administration, the regulatory body responsible for workplace safety in
the United States.
Question 7: What is the primary purpose of a "Fire Watch" during
Hot Work?

A) To observe workers for proper attire

B) To record the time spent on the job

C) To monitor for any signs of fire or hazards and respond promptly

D) To ensure workers are following company policies

Answer: C) To monitor for any signs of fire or hazards and respond promptly

Explanation: The primary purpose of a Fire Watch during Hot Work is to

monitor for any signs of fire or hazards and respond promptly to prevent
accidents.

Question 8: What is the recommended clothing for workers involved

in Hot Work?

A) Shorts and a tank top

B) Heavy winter clothing

C) Flame-resistant clothing and appropriate personal protective equipment (PPE)

D) Casual attire

Answer: C) Flame-resistant clothing and appropriate personal protective

equipment (PPE)

Explanation: Workers involved in Hot Work should wear flame-resistant

clothing and appropriate personal protective equipment (PPE) to protect
themselves from heat and sparks.
Question 9: Which of the following is NOT a typical hazard
associated with Hot Work?

A) Fire and explosions

B) Electrical shocks

C) Heat stress

D) Paper cuts

Answer: D) Paper cuts

Explanation: Paper cuts are not a typical hazard associated with Hot Work. The
main hazards are fire, explosions, electrical shocks, and heat stress.

Question 10: What is the purpose of "Permit to Work" for Hot

Work?

A) To authorize workers to take extended breaks

B) To document the number of workers involved

C) To ensure that Hot Work is performed safely and that necessary precautions are in
place

D) To list the names of workers' supervisors

Answer: C) To ensure that Hot Work is performed safely and that necessary
precautions are in place

Explanation: A Permit to Work for Hot Work is used to ensure that Hot Work is
performed safely and that all necessary precautions, such as fire extinguishers
and fire blankets, are in place.
Question 11: What is a common precautionary measure to prevent
heat stress during Hot Work?

A) Drinking hot beverages

B) Wearing extra layers of clothing

C) Taking frequent breaks in a cool area

D) Avoiding drinking water

Answer: C) Taking frequent breaks in a cool area

Explanation: To prevent heat stress during Hot Work, workers should take
frequent breaks in a cool area to cool down and hydrate.

Question 12: What is a "Fire Blanket," and how is it used in Hot

Work safety?

A) A blanket to keep workers warm

B) A special type of blanket used to extinguish small fires by smothering them

C) A blanket used to cover hot metal surfaces

D) A blanket for seating during breaks

Answer: B) A special type of blanket used to extinguish small fires by

smothering them

Explanation: A Fire Blanket is a special type of blanket used in Hot Work safety
to extinguish small fires by smothering them and preventing the spread of
flames.
Question 13: What is the recommended distance for flammable
materials to be kept away from Hot Work operations?

A) At least 1 inch

B) At least 1 foot

C) At least 1 yard

D) At least 1 mile

Answer: B) At least 1 foot

Explanation: Flammable materials should be kept at least 1 foot away from Hot
Work operations to prevent ignition.

Question 14: Why is it essential to shut off gas cylinders when not in
use during Hot Work?

A) To save gas

B) To maintain the gas pressure

C) To prevent gas leaks and the risk of fire or explosion

D) To increase gas flow during work

Answer: C) To prevent gas leaks and the risk of fire or explosion

Explanation: It is essential to shut off gas cylinders when not in use during Hot
Work to prevent gas leaks and the risk of fire or explosion.
Question 15: What is the primary goal of "Ventilation" during Hot
Work?

A) To create a comfortable working environment

B) To keep workers warm

C) To remove harmful fumes and gases, reducing the risk of inhalation hazards

D) To increase humidity levels

Answer: C) To remove harmful fumes and gases, reducing the risk of inhalation
hazards

Explanation: The primary goal of Ventilation during Hot Work is to remove

harmful fumes and gases, reducing the risk of inhalation hazards for workers.

Question 16: What is the primary purpose of "Hot Work Training"?

A) To teach workers how to perform Hot Work at higher temperatures

B) To educate workers about the dangers of Hot Work

C) To ensure that workers are properly trained to perform Hot Work safely

D) To promote entertainment events

Answer: C) To ensure that workers are properly trained to perform Hot Work
safely

Explanation: The primary purpose of Hot Work Training is to ensure that

workers are properly trained to perform Hot Work safely and are aware of
potential hazards.
Question 17: What is the primary objective of a "Hot Work Permit"?

A) To authorize workers to take vacations

B) To keep a record of workers' attendance

C) To ensure that Hot Work is performed safely and that necessary precautions are in
place

D) To document the names of all employees in the workplace

Answer: C) To ensure that Hot Work is performed safely and that necessary
precautions are in place

Explanation: A Hot Work Permit is used to ensure that Hot Work is performed
safely, and all necessary precautions are in place to prevent accidents.

Question 18: In Hot Work safety, what does the term "Flash Point"
refer to?

A) The point at which workers should start running

B) The temperature at which a substance ignites when exposed to an open flame or

spark

C) The point at which workers should stop working

D) The point at which a fire is fully extinguished

Answer: B) The temperature at which a substance ignites when exposed to an

open flame or spark

Explanation: In Hot Work safety, "Flash Point" refers to the temperature at

which a substance ignites when exposed to an open flame or spark.
Question 19: What is the purpose of "Fire-resistant Barriers" in Hot
Work safety?

A) To separate workers from their supervisors

B) To create physical barriers between Hot Work areas and nearby flammable
materials

C) To create a barrier to block natural light

D) To promote fashion trends

Answer: B) To create physical barriers between Hot Work areas and nearby
flammable materials

Explanation: Fire-resistant Barriers in Hot Work safety are used to create

physical barriers between Hot Work areas and nearby flammable materials to
prevent the spread of fire.

Question 20: What is the recommended method for extinguishing a

person whose clothing has caught fire during Hot Work?

A) Pour water over the person

B) Use a fire extinguisher

C) Have the person roll on the ground to smother the flames (Stop, Drop, and Roll)

D) Ignore the situation

Answer: C) Have the person roll on the ground to smother the flames (Stop,
Drop, and Roll)

Explanation: The recommended method for extinguishing a person whose

clothing has caught fire during Hot Work is to have the person roll on the
ground to smother the flames using the "Stop, Drop, and Roll" technique.
Question 21: What is the purpose of "Gas Monitoring" during Hot
Work?

A) To measure the amount of gas used during work

B) To track worker attendance

C) To continuously monitor and detect the presence of flammable gases in the work
area

D) To promote entertainment events

Answer: C) To continuously monitor and detect the presence of flammable

gases in the work area

Explanation: Gas Monitoring during Hot Work is used to continuously monitor

and detect the presence of flammable gases in the work area, ensuring worker
safety.

Question 22: What is the primary goal of "Fire Safety Training" in

Hot Work safety?

A) To encourage unsafe behavior

B) To increase the risk of fires

C) To educate workers about fire hazards, prevention, and response

D) To promote fashion trends

Answer: C) To educate workers about fire hazards, prevention, and response

Explanation: The primary goal of Fire Safety Training in Hot Work safety is to
educate workers about fire hazards, prevention, and response to ensure their
safety.
Question 23: What is the purpose of "Hot Work PPE" (Personal
Protective Equipment)?

A) To create a fashion statement

B) To keep workers cool during Hot Work

C) To protect workers from heat, sparks, and other hazards

D) To encourage unsafe behaviors

Answer: C) To protect workers from heat, sparks, and other hazards

Explanation: Hot Work PPE is used to protect workers from heat, sparks, and
other hazards associated with Hot Work, not to create a fashion statement.

Question 24: Why is it important to keep a fire watch for at least 30

minutes after Hot Work is completed?

A) To ensure that workers are not taking unauthorized breaks

B) To document the end time of the work

C) To monitor for any potential re-ignition or smoldering fires

D) To track worker attendance

Answer: C) To monitor for any potential re-ignition or smoldering fires

Explanation: Keeping a fire watch for at least 30 minutes after Hot Work is
completed is important to monitor for any potential re-ignition or smoldering
fires and take prompt action if needed.
Question 25: What is the primary purpose of "Hot Work Hazard
Assessment"?

A) To identify potential hazards associated with Hot Work

B) To determine the cost of Hot Work

C) To schedule Hot Work activities

D) To promote entertainment events

Answer: A) To identify potential hazards associated with Hot Work

Explanation: The primary purpose of Hot Work Hazard Assessment is to

identify potential hazards associated with Hot Work and take measures to
mitigate them.

Question 26: What is the recommended way to store flammable

materials during Hot Work?

A) In a cool and well-ventilated area

B) In direct sunlight

C) In the same area where Hot Work is being performed

D) Near open flames

Answer: A) In a cool and well-ventilated area

Explanation: Flammable materials should be stored in a cool and well-

ventilated area away from Hot Work to prevent ignition.
Question 27: What is the purpose of "Hot Work Permits" having an
expiration time?

A) To limit the number of workers involved in Hot Work

B) To create additional paperwork

C) To ensure that Hot Work is completed quickly

D) To specify a time when Hot Work must be completed or re-evaluated

Answer: D) To specify a time when Hot Work must be completed or re-

evaluated

Explanation: Hot Work Permits have an expiration time to specify a time when
Hot Work must be completed or re-evaluated for safety.

Question 28: What is the primary goal of "Hot Work Precautions"?

A) To encourage Hot Work without precautions

B) To document worker attendance

C) To minimize the risk of fire, explosions, and other hazards associated with Hot
Work

D) To promote entertainment events

Answer: C) To minimize the risk of fire, explosions, and other hazards

associated with Hot Work

Explanation: The primary goal of Hot Work Precautions is to minimize the risk
of fire, explosions, and other hazards associated with Hot Work.
Question 29: What is the primary purpose of "Fire Extinguishing
Equipment" during Hot Work?

A) To create a comfortable working environment

B) To measure the temperature of the work area

C) To provide a means to quickly extinguish fires that may occur during Hot Work

D) To promote entertainment events

Answer: C) To provide a means to quickly extinguish fires that may occur

during Hot Work

Explanation: The primary purpose of Fire Extinguishing Equipment during Hot

Work is to provide a means to quickly extinguish fires that may occur, ensuring
worker safety.

Question 30: What is the recommended distance for fire

extinguishers to be placed from Hot Work areas?

A) At least 10 feet

B) At least 1 yard

C) At least 50 feet

D) At least 100 feet

Answer: A) At least 10 feet

Explanation: Fire extinguishers should be placed at least 10 feet away from Hot
Work areas to ensure they are readily accessible in case of a fire.
Question 31: What is the purpose of "Hot Work Area Signage"?

A) To display artwork in the workplace

B) To create a festive atmosphere during Hot Work

C) To alert workers and visitors that Hot Work is in progress, and entry is restricted

D) To promote safety clothing

Answer: C) To alert workers and visitors that Hot Work is in progress, and entry
is restricted

Explanation: The purpose of Hot Work Area Signage is to alert workers and
visitors that Hot Work is in progress, and entry is restricted for safety reasons.

Question 32: During Hot Work, why is it essential to have an

emergency plan in place?

A) To schedule work breaks

B) To document the names of workers involved

C) To ensure that workers are properly attired

D) To respond promptly in case of fires, explosions, or other emergencies

Answer: D) To respond promptly in case of fires, explosions, or other

emergencies

Explanation: Having an emergency plan in place during Hot Work is essential to

respond promptly in case of fires, explosions, or other emergencies to protect
workers and property.
Question 33: What is the primary goal of "Fire Alarms" in Hot Work
safety?

A) To create loud noises

B) To alert workers to take a break

C) To provide an early warning of fire or emergencies to evacuate the area

D) To promote entertainment events

Answer: C) To provide an early warning of fire or emergencies to evacuate the

area

Explanation: The primary goal of Fire Alarms in Hot Work safety is to provide
an early warning of fire or emergencies, prompting workers to evacuate the
area for their safety.

Question 34: Why is it crucial to inspect welding and cutting

equipment before Hot Work begins?

A) To delay the start of Hot Work

B) To document the inspection process

C) To ensure that equipment is in good working condition and free from defects

D) To encourage unsafe practices

Answer: C) To ensure that equipment is in good working condition and free

from defects

Explanation: Inspecting welding and cutting equipment before Hot Work

begins is crucial to ensure that the equipment is in good working condition and
free from defects, promoting safety.
Question 35: What is the primary purpose of "Hot Work Training
Certification"?

A) To certify workers as professional welders

B) To encourage Hot Work without proper training

C) To verify that workers have received adequate training in Hot Work safety

D) To promote entertainment events

Answer: C) To verify that workers have received adequate training in Hot Work
safety

Explanation: The primary purpose of Hot Work Training Certification is to verify

that workers have received adequate training in Hot Work safety, ensuring they
are qualified to perform Hot Work safely.

Question 36: What is the recommended distance for flammable

materials to be stored from Hot Work equipment?

A) At least 1 foot

B) At least 10 feet

C) At least 50 feet

D) At least 100 feet

Answer: B) At least 10 feet

Explanation: Flammable materials should be stored at least 10 feet away from

Hot Work equipment to prevent ignition.
Question 37: What is the purpose of "Fire Watch Training" for
individuals assigned as fire watchers during Hot Work?

A) To teach them how to start fires safely

B) To ensure they can identify proper attire for workers

C) To educate them about their roles and responsibilities in monitoring for fires and
responding promptly

D) To promote entertainment events

Answer: C) To educate them about their roles and responsibilities in monitoring

for fires and responding promptly

Explanation: Fire Watch Training for individuals assigned as fire watchers

during Hot Work is conducted to educate them about their roles and
responsibilities in monitoring for fires and responding promptly to ensure
safety.

Question 38: Why is it essential to maintain clear access to fire exits

during Hot Work?

A) To restrict access to fire exits

B) To create obstacles in the workplace

C) To allow for quick and unobstructed evacuation in case of emergencies

D) To promote safety attire

Answer: C) To allow for quick and unobstructed evacuation in case of

emergencies

Explanation: Maintaining clear access to fire exits during Hot Work is essential
to allow for quick and unobstructed evacuation in case of emergencies,
ensuring worker safety.
Question 39: What is the purpose of a "Hot Work Log"?

A) To document the weather conditions during Hot Work

B) To record the temperature of the workplace

C) To keep a detailed record of Hot Work activities, including dates, times, locations,
and personnel involved

D) To promote entertainment events

Answer: C) To keep a detailed record of Hot Work activities, including dates,

times, locations, and personnel involved

Explanation: The purpose of a Hot Work Log is to keep a detailed record of Hot
Work activities, including dates, times, locations, and personnel involved for
documentation and safety tracking.

Question 40: What is the recommended method for handling gas

cylinders during Hot Work?

A) Dragging them across the floor

B) Rolling them gently on their sides

C) Carrying them by the valve cap

D) Using a cylinder cart or hand truck designed for the purpose

Answer: D) Using a cylinder cart or hand truck designed for the purpose

Explanation: The recommended method for handling gas cylinders during Hot
Work is to use a cylinder cart or hand truck designed for the purpose to ensure
safe transportation.
Question 41: What is the purpose of "Fire-resistant Curtains" during
Hot Work?

A) To enhance the workplace decor

B) To separate workers from their supervisors

C) To create physical barriers that can withstand heat and sparks to protect nearby
flammable materials

D) To promote fashion trends

Answer: C) To create physical barriers that can withstand heat and sparks to
protect nearby flammable materials

Explanation: Fire-resistant Curtains during Hot Work are used to create physical
barriers that can withstand heat and sparks, protecting nearby flammable
materials.

Question 42: What is the purpose of "Fire-resistant Tarpaulins"

during Hot Work?

A) To create a shaded area for workers

B) To protect workers from rain

C) To cover nearby flammable materials and surfaces to prevent sparks and heat
from igniting them

D) To promote entertainment events

Answer: C) To cover nearby flammable materials and surfaces to prevent sparks

and heat from igniting them

Explanation: Fire-resistant Tarpaulins during Hot Work are used to cover

nearby flammable materials and surfaces to prevent sparks and heat from
igniting them, enhancing safety in the work area.
Question 43: What is the purpose of "Fire-resistant Tarpaulins"
during Hot Work?

A) To create a shaded area for workers

B) To protect workers from rain

C) To cover nearby flammable materials and surfaces to prevent sparks and heat
from igniting them

D) To promote entertainment events

Answer: C) To cover nearby flammable materials and surfaces to prevent sparks

and heat from igniting them

Explanation: Fire-resistant Tarpaulins during Hot Work are used to cover

nearby flammable materials and surfaces to prevent sparks and heat from
igniting them.

Question 44: Why is it important to keep a clear path to emergency

exits during Hot Work?

A) To encourage workers to use emergency exits for regular access

B) To create obstacles in the workplace

C) To ensure quick and unobstructed evacuation in case of emergencies

D) To promote safety clothing

Answer: C) To ensure quick and unobstructed evacuation in case of

emergencies

Explanation: Keeping a clear path to emergency exits during Hot Work is

important to ensure quick and unobstructed evacuation in case of emergencies,
promoting safety.
Question 45: What is the primary purpose of "Hot Work Equipment
Inspection"?

A) To document the temperature of the equipment

B) To create a delay before starting Hot Work

C) To ensure that Hot Work equipment is in good working condition and safe to use

D) To promote entertainment events

Answer: C) To ensure that Hot Work equipment is in good working condition

and safe to use

Explanation: The primary purpose of Hot Work Equipment Inspection is to

ensure that Hot Work equipment is in good working condition and safe to use,
promoting safety.

Question 46: What is the recommended procedure for disposing of

hot slag and other debris generated during Hot Work?

A) Dump it in a nearby dumpster

B) Leave it on the floor for later cleanup

C) Place it in a designated, non-combustible container with a lid

D) Use it to create artwork

Answer: C) Place it in a designated, non-combustible container with a lid

Explanation: The recommended procedure for disposing of hot slag and other
debris generated during Hot Work is to place it in a designated, non-
combustible container with a lid to prevent fires.
Question 47: What is the primary goal of "Gas Cylinder Storage"
during Hot Work?

A) To keep gas cylinders hidden

B) To create obstacles in the workplace

C) To ensure that gas cylinders are stored upright, secured, and away from heat
sources

D) To promote gas cylinder sales

Answer: C) To ensure that gas cylinders are stored upright, secured, and away
from heat sources

Explanation: The primary goal of Gas Cylinder Storage during Hot Work is to
ensure that gas cylinders are stored upright, secured, and away from heat
sources to prevent accidents.

Question 48: Why is it important to wear appropriate eye protection

during Hot Work?

A) To look fashionable

B) To protect eyes from flying sparks, debris, and radiant heat

C) To obscure vision and create a mysterious appearance

D) To promote entertainment events

Answer: B) To protect eyes from flying sparks, debris, and radiant heat

Explanation: Wearing appropriate eye protection during Hot Work is important

to protect the eyes from flying sparks, debris, and radiant heat, ensuring safety.
Question 49: What is the recommended method for securing gas
cylinders during Hot Work?

A) Lay them on their sides

B) Stack them in a pyramid shape

C) Use chains, straps, or other secure restraints to prevent tipping or falling

D) Balance them on one another

Answer: C) Use chains, straps, or other secure restraints to prevent tipping or

falling

Explanation: The recommended method for securing gas cylinders during Hot
Work is to use chains, straps, or other secure restraints to prevent tipping or
falling, ensuring safety.

Question 50: What is the primary purpose of "Hot Work Safety

Audits"?

A) To encourage unsafe practices

B) To promote Hot Work without precautions

C) To periodically assess and improve Hot Work safety procedures and practices

D) To document worker attendance

Answer: C) To periodically assess and improve Hot Work safety procedures and
practices

Explanation: The primary purpose of Hot Work Safety Audits is to periodically

assess and improve Hot Work safety procedures and practices to enhance
safety in the workplace.
THANK YOU