Sangod
Sangod
Scan for
                                                                                                                                                                                         verification
                                                                                    Running Bill No 1
                               FOR CONTRACTORS AND SUPPLIERS ONLY FOR PAYMENT OF WORKS OR SUPPLIERS ACTUALLY MEASURED
Date: 01/08/2023
                                                                                                                                                  Scan for
                                                                                                                                                 verification
Meter    25    0    25 G-2) 2.47 Supply of ERW M.S. black casing pipe       1603.00 / 1603.00         40075.00                     0.00            40075.00
                       ISI marked IS:1239(Part-1:2004) medium of
                       following sizes at site of work.
                                                                                                                                               Scan for
                                                                                                                                              verification
 Set      1    0     1 G-9) 2.51 Supply and installation of ISI marked         16001.00 /          16001.00                     0.00            16001.00
                       India Mark II Hand pump set complete with                 16001.00
                       cylinder and 15 connecting rods.
Each      1    0     1 G-10) 2.55 Construction of 185 cm. dia platform 3852.00 / 3852.00             3852.00                    0.00              3852.00
                       as per approved design and drawing of UNICEF.
Meter    90    0    90 G-16) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         48420.00                     0.00            48420.00
                       mtr. depth in all type of rocks by DTH system
                       and over burden to accommodate casing pipe of
                       following sizes in all types of soils and over
                       burden including lowering of casing pipes, (if
                       required) excluding cost of casing pipes, as per
                       IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                       (both amended upto date) and technical
                       specifications. The work would be completed after
                       obtaining sand free water. The tube well should
                       have a through out bore as per nominal dia of
                       casing pipe.
                                                                                                                                                Scan for
                                                                                                                                               verification
Meter   76.8   0   76.8 G-21) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         41318.40                     0.00            41318.40
                        mtr. depth in all type of rocks by DTH system
                        and over burden to accommodate casing pipe of
                        following sizes in all types of soils and over
                        burden including lowering of casing pipes, (if
                        required) excluding cost of casing pipes, as per
                        IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                        (both amended upto date) and technical
                        specifications. The work would be completed after
                        obtaining sand free water. The tube well should
                        have a through out bore as per nominal dia of
                        casing pipe.
                                                                                                                                                Scan for
                                                                                                                                               verification
Meter   79.2   0   79.2 G-26) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         42609.60                     0.00            42609.60
                        mtr. depth in all type of rocks by DTH system
                        and over burden to accommodate casing pipe of
                        following sizes in all types of soils and over
                        burden including lowering of casing pipes, (if
                        required) excluding cost of casing pipes, as per
                        IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                        (both amended upto date) and technical
                        specifications. The work would be completed after
                        obtaining sand free water. The tube well should
                        have a through out bore as per nominal dia of
                        casing pipe.
                                                                                                                                                Scan for
                                                                                                                                               verification
Meter   85.8   0   85.8 G-31) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         46160.40                     0.00            46160.40
                        mtr. depth in all type of rocks by DTH system
                        and over burden to accommodate casing pipe of
                        following sizes in all types of soils and over
                        burden including lowering of casing pipes, (if
                        required) excluding cost of casing pipes, as per
                        IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                        (both amended upto date) and technical
                        specifications. The work would be completed after
                        obtaining sand free water. The tube well should
                        have a through out bore as per nominal dia of
                        casing pipe.
                                                                                                                                            Scan for
                                                                                                                                           verification
Meter   90   0   90 G-36) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         48420.00                     0.00            48420.00
                    mtr. depth in all type of rocks by DTH system
                    and over burden to accommodate casing pipe of
                    following sizes in all types of soils and over
                    burden including lowering of casing pipes, (if
                    required) excluding cost of casing pipes, as per
                    IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                    (both amended upto date) and technical
                    specifications. The work would be completed after
                    obtaining sand free water. The tube well should
                    have a through out bore as per nominal dia of
                    casing pipe.
                                                                                                                                                Scan for
                                                                                                                                               verification
Meter   88.9   0   88.9 G-41) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         47828.20                     0.00            47828.20
                        mtr. depth in all type of rocks by DTH system
                        and over burden to accommodate casing pipe of
                        following sizes in all types of soils and over
                        burden including lowering of casing pipes, (if
                        required) excluding cost of casing pipes, as per
                        IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                        (both amended upto date) and technical
                        specifications. The work would be completed after
                        obtaining sand free water. The tube well should
                        have a through out bore as per nominal dia of
                        casing pipe.
                                                                                                                                                Scan for
                                                                                                                                               verification
Meter   79.5   0   79.5 G-46) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         42771.00                     0.00            42771.00
                        mtr. depth in all type of rocks by DTH system
                        and over burden to accommodate casing pipe of
                        following sizes in all types of soils and over
                        burden including lowering of casing pipes, (if
                        required) excluding cost of casing pipes, as per
                        IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                        (both amended upto date) and technical
                        specifications. The work would be completed after
                        obtaining sand free water. The tube well should
                        have a through out bore as per nominal dia of
                        casing pipe.
                                                                                                                                               Scan for
                                                                                                                                              verification
Meter    90    0    90 G-51) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         48420.00                     0.00            48420.00
                       mtr. depth in all type of rocks by DTH system
                       and over burden to accommodate casing pipe of
                       following sizes in all types of soils and over
                       burden including lowering of casing pipes, (if
                       required) excluding cost of casing pipes, as per
                       IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                       (both amended upto date) and technical
                       specifications. The work would be completed after
                       obtaining sand free water. The tube well should
                       have a through out bore as per nominal dia of
                       casing pipe.
                                                                                                                                                Scan for
                                                                                                                                               verification
Meter    90    0    90 G-56) 2.45 Construction of Tube Well up to 100       538.00 / 538.00         48420.00                     0.00            48420.00
                       mtr. depth in all type of rocks by DTH system
                       and over burden to accommodate casing pipe of
                       following sizes in all types of soils and over
                       burden including lowering of casing pipes, (if
                       required) excluding cost of casing pipes, as per
                       IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                       (both amended upto date) and technical
                       specifications. The work would be completed after
                       obtaining sand free water. The tube well should
                       have a through out bore as per nominal dia of
                       casing pipe.
                                                                                                                                                Scan for
                                                                                                                                               verification
Meter    35    0    35 G-62) 2.47 Supply of ERW M.S. black casing     1603.00 / 1603.00             56105.00                     0.00            56105.00
                       pipe ISI marked IS:1239(Part-1:2004) medium of
                       following sizes at site of work.
                                                                                                                                                  Scan for
                                                                                                                                                 verification
 Set       1    0       1 G-74) 2.51 Supply and installation of ISI marked        16001.00 /          16001.00                     0.00            16001.00
                          India Mark II Hand pump set complete with                 16001.00
                          cylinder and 15 connecting rods.
Each       1    0       1 G-75) 2.55 Construction of 185 cm. dia platform 3852.00 / 3852.00             3852.00                    0.00              3852.00
                          as per approved design and drawing of UNICEF.
Meter   89.55   0   89.55 G-76) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         48177.90                     0.00            48177.90
                          mtr. depth in all type of rocks by DTH system
                          and over burden to accommodate casing pipe of
                          following sizes in all types of soils and over
                          burden including lowering of casing pipes, (if
                          required) excluding cost of casing pipes, as per
                          IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                          (both amended upto date) and technical
                          specifications. The work would be completed after
                          obtaining sand free water. The tube well should
                          have a through out bore as per nominal dia of
                          casing pipe.
                                                                                                                                                Scan for
                                                                                                                                               verification
Meter   88.4   0   88.4 G-81) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         47559.20                     0.00            47559.20
                        mtr. depth in all type of rocks by DTH system
                        and over burden to accommodate casing pipe of
                        following sizes in all types of soils and over
                        burden including lowering of casing pipes, (if
                        required) excluding cost of casing pipes, as per
                        IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                        (both amended upto date) and technical
                        specifications. The work would be completed after
                        obtaining sand free water. The tube well should
                        have a through out bore as per nominal dia of
                        casing pipe.
                                                                                                                                                Scan for
                                                                                                                                               verification
Meter   30.7   0   30.7 G-86) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         16516.60                     0.00            16516.60
                        mtr. depth in all type of rocks by DTH system
                        and over burden to accommodate casing pipe of
                        following sizes in all types of soils and over
                        burden including lowering of casing pipes, (if
                        required) excluding cost of casing pipes, as per
                        IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                        (both amended upto date) and technical
                        specifications. The work would be completed after
                        obtaining sand free water. The tube well should
                        have a through out bore as per nominal dia of
                        casing pipe.
                                                                                                                                               Scan for
                                                                                                                                              verification
Meter    90    0    90 G-91) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         48420.00                     0.00            48420.00
                       mtr. depth in all type of rocks by DTH system
                       and over burden to accommodate casing pipe of
                       following sizes in all types of soils and over
                       burden including lowering of casing pipes, (if
                       required) excluding cost of casing pipes, as per
                       IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                       (both amended upto date) and technical
                       specifications. The work would be completed after
                       obtaining sand free water. The tube well should
                       have a through out bore as per nominal dia of
                       casing pipe.
                                                                                                                                                Scan for
                                                                                                                                               verification
Meter   87.5   0   87.5 G-96) 2.45 Construction of Tube Well up to 100      538.00 / 538.00         47075.00                     0.00            47075.00
                        mtr. depth in all type of rocks by DTH system
                        and over burden to accommodate casing pipe of
                        following sizes in all types of soils and over
                        burden including lowering of casing pipes, (if
                        required) excluding cost of casing pipes, as per
                        IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                        (both amended upto date) and technical
                        specifications. The work would be completed after
                        obtaining sand free water. The tube well should
                        have a through out bore as per nominal dia of
                        casing pipe.
                                                                                                                                            Scan for
                                                                                                                                           verification
Meter   61   0   61 G-101) 2.45 Construction of Tube Well up to 100     538.00 / 538.00         32818.00                     0.00            32818.00
                    mtr. depth in all type of rocks by DTH system
                    and over burden to accommodate casing pipe of
                    following sizes in all types of soils and over
                    burden including lowering of casing pipes, (if
                    required) excluding cost of casing pipes, as per
                    IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                    (both amended upto date) and technical
                    specifications. The work would be completed after
                    obtaining sand free water. The tube well should
                    have a through out bore as per nominal dia of
                    casing pipe.
                                                                                                                                               Scan for
                                                                                                                                              verification
Meter    90    0    90 G-106) 2.45 Construction of Tube Well up to 100     538.00 / 538.00         48420.00                     0.00            48420.00
                       mtr. depth in all type of rocks by DTH system
                       and over burden to accommodate casing pipe of
                       following sizes in all types of soils and over
                       burden including lowering of casing pipes, (if
                       required) excluding cost of casing pipes, as per
                       IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                       (both amended upto date) and technical
                       specifications. The work would be completed after
                       obtaining sand free water. The tube well should
                       have a through out bore as per nominal dia of
                       casing pipe.
                                                                                                                                                  Scan for
                                                                                                                                                 verification
Meter   89.75   0   89.75 G-111) 2.45 Construction of Tube Well up to 100     538.00 / 538.00         48285.50                     0.00            48285.50
                          mtr. depth in all type of rocks by DTH system
                          and over burden to accommodate casing pipe of
                          following sizes in all types of soils and over
                          burden including lowering of casing pipes, (if
                          required) excluding cost of casing pipes, as per
                          IS:2800 Part 1: 1991 and IS:2800 Part II: 1979
                          (both amended upto date) and technical
                          specifications. The work would be completed after
                          obtaining sand free water. The tube well should
                          have a through out bore as per nominal dia of
                          casing pipe.