Macs 30
Multi parameter patient monitor
www.sternmed.de
Macs 30
Multi parameter patient monitor
The Macs 30 is a multi parameter monitor
offering a variety of applications. It can be
used to measure and monitor parameters of
SpO2, NIBP, Pulse, TEMP, ECG and RESP.
Optional mainstream, sidestream EtCO2
and 1 or 2-Channel IBP monitoring func-
tions are also available.
2 © SternMed
FEATURES
• 15“ high resolution color TFT screen
• 5 or 9 channel waveform display with
trend coexistence, switchable to large font
• Monitoring standard parameters of ECG,
SPO2, RESP, NIBP, TEMP & pulse
• Automatic analysis of 20 arrhythmia
waveforms
• S-T segment with automatic & manual
analysis
• Digital SpO2 technology with anti-motion &
anti-low infusion
• Trend data analysis for 8/24/120 hours
• Storage & review 500 groups of data &
24-hour ECG waveforms
• Protection against interference from
defibrillator & electrosurgical unit
• Feasible to be used with cardiac pacemaker
together
• Optimized modes for adult, child & neonate
• Removable and rechargeable battery
3 © SternMed
OPTIONS
• Built-In thermal printer
• 1-Channel IBP
• 2-Channel IBP
• Nellcor compatible SpO2
• Touch screen
• NIBP Neonate cuff
• SpO2 Neonate Sensor
• NIBP Child cuff
• SpO2 Child Sensor
• Rectal Temperature probe
• Monitor Trolley
• Respironic EtCO2
• Wall mounting rack
• Multigas without O2
4 © SternMed
TECHNICAL SPECIFICATIONS
Macs 30 | SternMed Multi parameter patient monitor
ECG
ECG Amplifier Bandwidth Monitoring mode:O.5-40Hz
Diagnosis mocIe:O.05_75Hz
CMRR >80dB
Heart Rate Range 15-350bpm
Accuracy +2bpm
ECG Gain 1/2 5mm/mV+5%
1 10mm/mV+5%
2 20mm/mV+5%
Auto Auto gain control
Load Selection GND; Standard I,II,III; aVR, aVL, aVF, chest V1-V8
ECG Sweeping Speed 12.5mm/s, 25mm/s, 50mm/s
Alarm Setting Customized upper & lower limits & auto saved
SPO2
Display SpO2 value & waveform pulse rate & histogram
Resolution of SpO2 +1%
Accuracy of SpO2 +2%(75-99%)
+3%(50-75%)
Measurement Range of Pulse Rate 30-240 bpm
Accuracy of Pulse Rate +2bpm
Alarm Setting Customized upper & lower limits & auto saved
RESP
Measurement Method Thoracic Impedance
Measurement Range 0-100 bpm
Accuracy ±5%
Alarm Setting Customized upper & lower limits & auto saved
TEMP
Range 28.0-45.0°C
Accuracy +0.2°C
Alarm Customized upper & lower limits & auto saved
NIBP
Measurement Method Intelligent Oscillometric method
Parameters Manual, automatic & STAT (5minutes)
Working Modes mmHg/kPa selectable
Unit Display 0-300 mmHg
Cuff Pressure Range Adult (standard)
Child/neonate (optional)
Automatic Measuring Time 1-240 minutes
Inflation Time <10s (typical adult cuff)
Deflation Time <2s (typical adult cuff)
Monitoring Range Systolic 25-265mmHg
Adult/Child Diastolic 12-220mmHg
Mean 18-245mmHg
Systolic 25-135mmHg
Neonate Diastolic 12-110mmHg
Mean 18-120mmHg
Alarm Setting Customized upper & lower limits & auto saved
GENERAL SPECIFICATIONS
Standard Configuration ECG, HR, RESP, NIBP, SpO2 , PR, TEMP, Battery
Power 100-250VAC, 50/60Hz
Power Consumption < 80VA
Display TFT Color LCD (15”)
Alarm Audible & Visual
Networking RJ45
Battery Rechargeable lead-acid battery
Service Life > 2 hours
Safety Standard EN IEC60601-1
5 © SternMed
SternMed GmbH
Schubertstrasse 31 © SternMed GmbH – All rights reserved.
88214 Ravensburg - Germany
SternMed GmbH reserves the right to make
Tel: +49 751 35 978 0 changes in specifications and features shown
Fax: +49 751 35 978 105 herein, or discontinue the product described
at any time without notice or obligation. Con-
email@sternmed.de tact your SternMed Representative for the
most current information.
Rev. V. 1.03
www.sternmed.de
