S06A Command list
No function format example English reply English Mark 备注
所有指令下发格式错误时回复：
SERVER,1,www.whatsgps.com,6801, Invalid format!
SERVER,mode,domainN mode = 1 means set with domain name
1 Set IP 0# OK 如果是填入参数错误，则提示参数错误：
ame/IP,port,0# mode = 0 means set with ip address
SERVER,0,47.75.111.37,6801,0# 如设置时区，GMT,R,8,0#，R非有效参数
Error:Parameters error!
OK! for the newly-set
APN, [apnname]# APN,cmnet# APN to take effect, the
2 Set APN Close automatic APN and set by yourself.
APN, APN,internet,user,user# device will reboot after
[apnname],[user],[pwd] 10s.
T1 ranges 5~18000 (seconds), upload interval when ACC ON,
Timing upload default is 10;
3 TIMER,[T1],[T2]# TIMER,10,10# OK!
interval T2 ranges 5~18000 (seconds), upload interval when ACC
OFF, default is 10;
T ranges 1~300 (minutes), heartbeat package upload
4 Heartbeat interval HBT,[T]# HBT,3# OK!
interval; default is 3;
Set the SOS SOS,A,[phone1][,phone OK!
5 SOS,A,13122012031,13122012032,# Add SOS phone number.
number 2][,phone3]# SOS1:13122012031
SOS,D,[sequence
OK! Delete the phone number according to the sequence
Delete SOS number 1][, sequence
6 SOS,D,2# SOS1:13122012031 number.
number number 2][,sequence
SOS2: SOS3: Delete the matching SOS phone number.
number 3]#
Set the center CENTER, A,[phone OK! Center
7 CENTER,A,13122012031# Add center phone number.
number number]# Number:13122012031
Delete center
8 CENTER, D# CENTER, D# OK! Center Number: Delete center phone number.
number
Restore fuel
RELAY,0# supply:Success! 只有中心号码发送有效，其他号码发送则回复
9 Control oil and gas RELAY,[A]# A=0/1；0 means connection, 1 means cut off；default: 0.
RELAY,1# Cut off the fuel Invalid number, no access control
supply:Success!
所有报警信息的返回内容格式：
A：E or W；"E" means eastern time zone, "W" means
IMEI:设备IMEI,TIme:日期时间,AlarmType:报警类型,定位
western time zone；default：E
10 Time zone setting GMT,[A],[b],[C]# GMT,E,8,0# OK! 的谷歌地图链接;
B：0～12；time zone default：8
C：0/15/30/45；half time zone；default：0 报警类型:Vibration alarm/Cut off external power/Low
language battery/SOS alarm/Moving alarm/Out of fence/Into of
LANG,0# OK! fence/Speed alarm
11 settings LANG,N# Set the language
LANG,1# OK!
例如震动报警：
Vibration alarm SENALM,ON,1# OK! A=ON/OFF, default: OFF;
IMEI:353701093444657,Time:2019-08-16
M=0/1/2/3, way of alarm, 0 : GPRS only, 1: SMS+GPRS, 17:39:46,AlarmType:Vibration alarm,address:<08-16
SENALM,[A][,M]#
12 2:GPRS+SMS+PHONE,3:GPRS+PHONE 17:39>http://maps.google.com/maps?q=N23.168629,E113.
SENALM,OFF# OK! default：1. 433510
SENALM# SENALM:ON,1 Check the vibration alarm setting 为避免报警短信过长而分两条发送，原定的经纬度信息
Power failure A=ON/OFF, default：ON; 去掉，从谷歌地址链接看经纬度
POWERALM,ON,1# OK!
alarm M=0/1/2/3, way of alarm, 0 : GPRS only, 1: SMS+GPRS,
13 POWERALM,[A][,M]# 2:GPRS+SMS+PHONE,3:GPRS+PHONE
POWERALM,OFF# OK! default：1.
POWERALM# POWERALM:ON,1 Check the cut off power alarm setting
Low battery alarm BATALM,ON,1# OK! A=ON/OFF, default：ON;
M=0/1/2/3, way of alarm, 0 : GPRS only, 1: SMS+GPRS,
14 BATALM, [A][, M]# 2:GPRS+SMS+PHONE,3:GPRS+PHONE
BATALM,OFF# OK! default：1.
BATALM# BATALM: ON, 1 Check the low battery alarm setting
SOS alarm SOSALM,ON,1# OK! A=ON/OFF, default：ON;
M=0/1/2/3, way of alarm, 0 : GPRS only, 1: SMS+GPRS,
15 SOSALM,[A],[M]# 2:GPRS+SMS+PHONE,3:GPRS+PHONE
SOSALM,OFF# OK! default：1.
SOSALM# SOSALM:ON,1 Check the SOS alarm setting
A=ON/OFF, open or close over speed alarm, default：OFF
Speed alarm SPEED,ON,120,1# OK!
B=1～255(km/h), speed limit, default：100(km/h);
M=0/1/2/3, way of alarm, 0 : GPRS only, 1: SMS+GPRS,
16 SPEED,[A][,B][,M]# 2:GPRS+SMS+PHONE,3:GPRS+PHONE
SPEED,OFF# OK!
default：1.
SPEED# SPEED:OFF,120,1 Check the speed alarm setting
Displacement A=ON/OFF, default：OFF; 以设备定位为中心，根据半径参数设置圆形围栏，出此围
MOVING,ON,200,1# OK!
alarm R=100～1000, moving radius, unit: meter, default: 300； 栏则报警
M=0/1/2/3, way of alarm, 0 : GPRS only, 1: SMS+GPRS,
17 MOVING,[A][,R][,M]# 2:GPRS+SMS+PHONE,3:GPRS+PHONE
MOVING,OFF OK!
default：1.
Moving Switch:OFF;
MOVING# Check the moving alarm setting
Radius:300m; Alarm
A=ON/OFF, open or close over speed alarm, default：OFF
ACC alarm ACCALM,ON,1,1# OK! B=1,ACC ON alarm;
B=2,ACC OFF alarm;
B=3,ACC ON and ACC OFF alarm;
18 ACCALM,[A][,B][,M]# default：3;
M=0/1/2/3, way of alarm, 0 : GPRS only, 1: SMS+GPRS,
ACCALM,OFF# OK! 2:GPRS+SMS+PHONE,3:GPRS+PHONE
default：1.
ACCALM# ACC:ON,2,1 Check the ACC alarm setting
Light alarm LIGALM,ON,1# OK! A=ON/OFF, default: ON; 设置圆心经纬度和半径
M=0/1/2/3, way of alarm, 0 : GPRS only, 1: SMS+GPRS,
19 LIGALM,[A][,M]# LIGALM,OFF# OK! 2:GPRS+SMS+PHONE,3:GPRS+PHONE 设置左上角和右下角经纬度，设置矩形围栏
default：1.
LIGALM# LIGALM:ON,1 Check the light alarm setting
circle area;
B=ON/OFF, open or close fence alarm, default：close;
OK! FenceType:Circle, D=the latitude of the circle center;range：-90
ON, ～90(degree)；
Latitude:N23.111111, E=the longitude of the circle center;range：-180
Fence setting FENCE,[B],0,[D],[E],[F],[ FENCE,ON,0,23.11111,113.12312,20
20 Longitude:E113.123123 ～180(degree)； 静止后过defense时间后设防，设防后可以触发震动报警
(circular) X],[M]# 0,,1#
, radius:20000m, in F=1～9999, the fence radius, unit：100 meters;
out:IN or OUT, alarm X=IN/OUT；IN: alarming when get in the fence, OUT:
type:1. alarming when get out the fence, blank means both alarming
when get in or get out the fence, default: blank.
M=0/1；way of alarming,0 :GPRS only, 1: SMS+GPRS,
rectangle area
B=ON/OFF, open or close fence alarm, default：close;
D=the latitude of the position 1；range：-90
OK! FenceType:Square,
～90(degree)；
ON,
E=the longitude of the position 1；range：-180
Latitude1:N23.111111,
～180(degree)；
FENCE,[B],1,[D],[E],[F],[ Longitude1:E113.12312
Fence setting FENCE,ON,1,23.11111,113.12312,20 F=the latitude of the position 2；range：-90 ～90(degree)；
21 G][,X][,M]# 3, 取消设防状态
(rectangle) 0,23.44232,115.23224,,1# G=the longitude of the position 2；range：-180
Latitude2:N23.442320,
～180(degree)；
Longitude2:E115.23223
X=IN/OUT；IN: alarming when get in the fence, OUT:
9, in out:IN or OUT,
alarming when get out the fence, blank means both alarming
alarm type:1.
when get in or get out the fence, default: blank.
M=0/1；way of alarming, 0 :GPRS only, 1: SMS+GPRS,
2:GPRS+phone call, 3 : GPRS+SMS+phone call, default：1；
OK! FenceType:Square,
ON,
Fence setting Latitude1:N23.111111,
22 FENCE# FENCE# Check the fence setting
query Longitude1:E113.12312
3,
Latitude2:N23.442320,
A= 1～60 (minute), delay of the defense, default：10
23 Automatic arming DEFENSE,[A]# DEFENSE,10# OK!
(minutes).
Cancel defense
24 DSRESET# DSRESET# OK! DSRESET# Cancel the current Arm status
status
GPRS盲区存储数据满时，无法再继续存储数据，会发短信
Inflection point 给SOS号码：
ANGLEREP,ON# OK!
switch X=ON/OFF, default：ON Memory data is full!Unable to store new data
25 ANGLEREP,x#
发送CLEAR#可以清空存储数据
ANGLEREP,OFF# OK!
ANGLEREP# ANGLEREP:OFF Check the anglerep setting
26 Clear backup data CLEAR# CLEAR# OK! Clear the backup data
Upload data time
UTC,ON# OK! Use UTC+0 as the datetime in location packet IP参数不变，apn还原为cmnet，其他参数还原到出厂设置
zone
27 UTC,X#
UTC,OFF# OK! Use GMT time as the datetime in location packet
The device would
28 Restart RESET# RESET# Reboot the device 包括经纬度/速度值/定位时间
reboot in 20S after
OK!
29 Restore factory FACTORY# FACTORY# The terminal will Restore to factory setting 定位时间，谷歌地图地址经纬度
restart after 60s!
设备IMEI/上传间隔/SOS号码/中心号码/自动设防
query command 时间/时区/GPRS开关/APN/服务器IP域名和端口
外电源是否接通以及电压值:ON/OFF，电压值
GPRS接通情况：Link UP/Link Down 是否连接服务器
Current position! GSM信号强度：H,M,L表示
Lat:N22.577156,Lon:E1 GPS状态:Successful positioning/Searching/OFF
13.916748,Course:0.00, 分别是定位/搜索信号中/GPS休眠
1 Query positioning WHERE# WHERE# Query the address
Speed:0.00Km/h,Date 使用卫星颗数：使用数/搜星数
Time:2013-01-08 卫星信号级别：
17:35:32 ACC状态:ON/OFF
是否设防:ON/OFF
设备无法获取电池电压信息，所以去除电池的信息
<08-16
16:30>http://maps.goo
2 Query address link URL# URL# Query the address google maps link 型号更换为S06A，生产批次不变
gle.com/maps?q=N23.1
68629,E113.433510
IMEI:35370109344465
7; TIMER:10,10;
SOS:18820129124,,;
Center
3 Query parameter PARAM# PARAM# Number:18820789124; Query the parameters
Defense time:10;
TimeZone:E,8,0;GPRS:O
N; APN:cmnet,,;
Server:1,www.whatsgp
External
power:ON,12.2V;
GPRS:Link Up GSM
4 Query status STATUS# STATUS# Signal Level:Strong; Query the status
GPS:Successful
positioning; SVS Used
in fix:8(10); GPS Signal
5 Query version VERSION# VERSION# [VERSION]S06A_ Query the version
