Data sheet
ZDK 2.5V Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Product image
To feed through power, signal, and data is the classical
requirement in electrical engineering and panel building.
The insulating material, the connection system and the
design of the terminal blocks are the differentiating fea-
tures. A feed-through terminal block is suitable for joining
and/or connecting one or more conductors. They could
have one or more connection levels that are on the same
potential or insulated against one another.
General ordering data
Version Feed-through terminal, Double-tier terminal, Ten-
sion-clamp connection, 2.5 mm², 500 V, 20 A,
dark beige
Order No. 1689990000
Type ZDK 2.5V
GTIN (EAN) 4008190875459
Qty. 50 pc(s).
Creation date October 17, 2024 4:29:55 PM CEST
Catalogue status 12.10.2024 / We reserve the right to make technical changes. 1
Data sheet
ZDK 2.5V Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Dimensions and weights
Depth 53 mm Depth (inches) 2.087 inch
Depth including DIN rail 54 mm Height 79.5 mm
Height (inches) 3.13 inch Width 5.1 mm
Width (inches) 0.201 inch Net weight 10.56 g
Temperatures
Storage temperature Operating temperature range For operating temperature
range see EC Design Test
Certificate / IEC Ex-Certifi-
-25 °C...55 °C cate of Conformity
Continuous operating temp., min. -60 °C Continuous operating temp., max. 130 °C
Material data
Material Wemid Colour dark beige
UL 94 flammability rating V-0
Rating data IECEx/ATEX
Certificate No. (ATEX) DEMKO16ATEX1729U Certificate No. (IECEX) IECEXULD16.0025U
Max. voltage (ATEX) 440 V Current (ATEX) 20 A
Wire cross section max. (ATEX) 2.5 mm² Max. voltage (IECEX) 440 V
Current (IECEX) 20 A Wire cross section max. (IECEX) 2.5 mm²
Operating temperature range For operating temperature Marking EN 60079-7
range see EC Design Test
Certificate / IEC Ex-Certifi-
cate of Conformity Ex eb II C Gb
Ex 2014/34/EU label II 2 G D
System specifications
Version Tension-clamp connection, End cover plate required
Vertically cross-connected,
for plug-in cross-connector,
One end without connec-
tor Yes
Number of potentials 1 Number of levels 2
Number of clamping points per level 2 Levels cross-connected internally Yes
PE connection No Rail TS 35
Additional technical data
Explosion-tested version Yes Number of similar terminals 1
Open sides right Type of mounting Snap-on
CSA rating data
Certificate No. (CSA) Conductor size Factory wiring max.
80053378-200039 (CSA) 12 AWG
Conductor size Factory wiring min. (CSA)26 AWG Conductor size Field wiring max. (CSA) 12 AWG
Conductor size Field wiring min. (CSA) 26 AWG
Conductors for clamping (additional connection)
Connection type, additional connection Tension-clamp connection
Creation date October 17, 2024 4:29:55 PM CEST
Catalogue status 12.10.2024 / We reserve the right to make technical changes. 2
Data sheet
ZDK 2.5V Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Conductors for clamping (rated connection)
Blade size 0.6 x 3.5 mm
Clamping range, max. 2.5 mm²
Clamping range, min. 0.05 mm²
Connection direction top
Gauge to IEC 60947-1 A2
Number of connections 4
Stripping length 10 mm
Tube length for wire-end ferrule with Cross-section for conductor connection nominal 0.5 mm²
plastic collar DIN 46228/4 Tube length max. 10 mm
min. 6 mm
Cross-section for conductor connection nominal 0.75 mm²
Tube length max. 12 mm
min. 6 mm
Cross-section for conductor connection nominal 1 mm²
Tube length max. 12 mm
min. 6 mm
Cross-section for conductor connection nominal 1.5 mm²
Tube length max. 12 mm
min. 8 mm
Cross-section for conductor connection nominal 2.5 mm²
Tube length max. 12 mm
min. 8 mm
Tube length for wire-end ferrule without Cross-section for conductor connection nominal 0.5 mm²
plastic collar DIN 46228/1 Tube length nominal 10 mm
Cross-section for conductor connection nominal 0.75 mm²
Tube length nominal 10 mm
Cross-section for conductor connection nominal 1 mm²
Tube length nominal 10 mm
Cross-section for conductor connection nominal 1.5 mm²
Tube length max. 12 mm
min. 10 mm
Cross-section for conductor connection nominal 2.5 mm²
Tube length max. 12 mm
min. 10 mm
Type of connection Tension-clamp connection
Type of connection 2 Tension-clamp connection
Wire connection cross section AWG, AWG 14
max.
Wire connection cross section AWG, AWG 24
min.
Wire connection cross section, finely 2.5 mm²
stranded, max.
Wire connection cross section, finely 0.5 mm²
stranded, min.
Wire connection cross-section, fine- 2.5 mm²
ly stranded with wire-end ferrules DIN
46228/1, max.
Wire connection cross-section, fine- 0.5 mm²
ly stranded with wire-end ferrules DIN
46228/1, min.
Wire connection cross-section, fine- 2.5 mm²
ly stranded with wire-end ferrules DIN
46228/4, max.
Wire connection cross-section, fine- 0.5 mm²
ly stranded with wire-end ferrules DIN
46228/4, min.
Creation date October 17, 2024 4:29:55 PM CEST
Catalogue status 12.10.2024 / We reserve the right to make technical changes. 3
Data sheet
ZDK 2.5V Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Wire connection cross-section, solid 2.5 mm²
core, max.
Wire connection cross-section, solid 0.5 mm²
core, min.
General
Rail TS 35 Standards IEC 60947-7-1
Wire connection cross section AWG, Wire connection cross section AWG,
max. AWG 14 min. AWG 24
Rating data
Rated cross-section 2.5 mm² Rated voltage 500 V
Rated DC voltage 500 V Rated current 20 A
Current at maximum wires 20 A Standards IEC 60947-7-1
Volume resistance according to IEC Rated impulse withstand voltage
60947-7-x 1.33 mΩ 6 kV
Power loss in accordance with IEC Pollution severity
60947-7-x 0.77 W 3
UL rating data
Certificate No. (UR) E60693 Conductor size Factory wiring max. (UR) 14 AWG
Conductor size Factory wiring min. (UR) 26 AWG Conductor size Field wiring max. (UR) 14 AWG
Conductor size Field wiring min. (UR) 26 AWG Current size C (UR) 15 A
Voltage size C (UR) 300 V
Classifications
ETIM 6.0 EC000897 ETIM 7.0 EC000897
ETIM 8.0 EC000897 ETIM 9.0 EC000897
ECLASS 9.0 27-14-11-20 ECLASS 9.1 27-14-11-20
ECLASS 10.0 27-14-11-20 ECLASS 11.0 27-14-11-20
ECLASS 12.0 27-14-11-20 ECLASS 13.0 27-25-01-02
ECLASS 14.0 27-25-01-02
Cradle to gate 0.145 kg CO2 eq.
Environmental Product Compliance
RoHS Compliance Status Compliant without exemption
REACH SVHC /
Product Carbon Footprint de.myview.objectmodel.impl.BlockImpl@522cd97c
Creation date October 17, 2024 4:29:55 PM CEST
Catalogue status 12.10.2024 / We reserve the right to make technical changes. 4
Data sheet
ZDK 2.5V Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Technical data
Approvals
Approvals
ROHS Conform
UL File Number Search UL Website
Certificate No. (UR) E60693
Downloads
Approval/Certificate/Document of Con- Attestation of Conformity
formity UKCA Ex Attestation of Conformity
ATEX Certificate
IECEx Certificate
CCC Ex Certificate
UKCA Ex Certificate
DNV Certificate
CE Declaration of Conformity
UKCA declaration of conformity
Confirmation of Standards EN 45545-2_2020-10
Engineering Data CAD data -- STEP
User Documentation NTI ZDK-PE 2.5 V
NTI ZDK 2.5 V DU-PE
StorageConditionsTerminalBlocks
Catalogues Catalogues in PDF-format
Brochures
Creation date October 17, 2024 4:29:55 PM CEST
Catalogue status 12.10.2024 / We reserve the right to make technical changes. 5
Data sheet
ZDK 2.5V Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26
D-32758 Detmold
Germany
www.weidmueller.com
Drawings
Creation date October 17, 2024 4:29:55 PM CEST
Catalogue status 12.10.2024 / We reserve the right to make technical changes. 6
