P/N 1067093A Gerotor Pump Retrofit Kit - PN 1064357: Install The Coupling Covers
Uploaded by
eng.alanportelaP/N 1067093A Gerotor Pump Retrofit Kit - PN 1064357: Install The Coupling Covers
Uploaded by
eng.alanportelaInstruction Sheet P/N 1067093A
Gerotor Pump Retrofit Kit - PN 1064357 Issued 9/06
This instruction sheet describes the installation of additional components WARNING: Risk of personal injury or equipment damage! Refer to Required Tools:
that are required when replacing an old-design gerotor pump with a new- the safety information provided in the melter manual before servic-
design gerotor pump on a DuraBluet adhesive melter. ing the melter. Failure to comply with the safety information pro- Phillips-head screwdriver
vided can result in personal injury, including death. 10 and 13 mm wrenches
3 and 4 mm hex keys
M5 tap
3.7 (4.2?) mm drill
NOTE: The illustrations to the right show Install the Coupling Covers
the old and new gerotor pump assembly
designs. Refer to TG330, Pump and Motor
Changes to DuraBlue Melters, for details on
the change from the old to the new design. M5 x 10 screws
Coupling cover
Old design New design
ATTENTION: Refer to instruction sheet P/N 1032546, supplied with the
pump service kit (P/N 1050729 or 1050728), for detailed instructions on how to re-
Pump support bracket move, disassemble, and reinstall the drive assembly/pump assembly.
Pump support bracket
Install the Pump Support Bracket
M5 x 10 screw and washer (4
each)