FORWARD-FACING

USER MANUAL

ECE R44 04
GROUP WEIGHT AGE
2-3 15-36 kg 4-12 y

1
 Thank you for choosing BeSafe iZi Up Vital information
BeSafe have developed this seat with great care to protect • It is NOT ALLOWED to mount the seat in a front !
your child during the next phase of her or his life. passenger seat WITH AN ACTIVATED AIRBAG.
• iZi Up can be installed forward-facing with a
3-point belt, approved to UN/ECE Regulation
! It is important that you read this user manual BEFORE installing
No.16 or other.
your seat. Incorrect installation could endanger your child.

shoulder OK
belt hip belt NO
Contents
Vital information 3
Preparing to install 4
Forward-facing belt installation 5
Removing the seat 7 • iZi Up is approved in group 2-3, forward-facing from 15-36 kg.
Positioning the child 8 • The child should ALWAYS be secured with the 3-point belt
Sleeping position 9 when seated in the child seat.
Removing and refitting the cover 10 • When the child weighs over 36 kg or the shoulder height
Cleaning instructions 10 grows above the highest position of the shoulder belt guide
Warning: potential misuse 11 of the 3-point belt, the child can sit without a child restraint
Point of sale information 11 system in the car.
Important advice 12 • After an accident, the seat must be replaced. Although it may
Guarantee 13 look undamaged, if you were to have another accident, the
seat may not be able to protect your child as well as it should.
• Prevent the iZi Up from becoming trapped or weighed down by
luggage, seats and/or slamming doors.
• Before every use, make sure that the 3-point belt is not
damaged or twisted and installed tight.
• If in doubt, consult either your retailer or the child
restraint manufacturer.

2 3
 Preparing to install Forward-facing belt installation
Crucial parts • It is NOT ALLOWED to mount the seat in a front !
passenger seat WITH AN ACTIVATED AIRBAG.
Headrest • When installing the seat in the front car seat: make
Cover headrest sure the backrest of the car seat has an upright
Shoulderbelt guide position. Slide the car seat rearwards as far as possible.
Backrest
Cover backrest 1- Place iZi Up on the car seat.
Reclining handles (2x)
Seat 2- Make sure the back of the seat is touching the backrest of the
Seat cover vehicle seat. If the head rest of the vehicle is pushing the seat
Base away from the backrest, adjust or remove the headrest (1).

(1)

Instruction label
Carrying handle
Storage user manual
Height adjusting lever (2x)

4 5
 • If the seat feels unstable, even after removal of the headrest 4- Always close the car three point belt into
of the car, you can use the extra stability strap. the buckle before driving, also when the
• The stability strap is not an essential safety part and needs seat is not in use by a child! (4) (4)
only to be used in cars when the iZi Up is connected with the
3-point car belt and when the head rest of the car can not
be removed.
Placing the stability strap
• In order to install the stability strap, (2) click!
put the iZi Up and the headrest of the
car in the most upward position.
• Guide the stability strap between the
cover and the surface of the iZi Up
head rest.
• Then guide the strap around both bars
of the head rest of the car.
• Adjust the iZi Up to the correct height
by turning the height adjusting lever.
• Tighten the stability strap by
connecting the velcro strap as tight
as possible (2).

3- Slide the lower part of the shoulder belt guide open and
position the belt in the guide. Make sure the belt is not twisted
and close the guide again (3).
Removing the seat
1- Slide the lower part of the shoulder belt guide open and
(3) remove the belt from the guide (5).

(5)

2- Take iZi Up out of the car.

6 7
 Positioning the child 4- Remove slack in the belt by pulling
1- Adjust the backrest and the the belt towards the retractor (9).
headrest to the right height (9)
by turning the height adjuster
lever. Make sure that the (6)

shoulder belt is level with your

child’s shoulder (6).

Sleeping position
2- Slide the lower part of the shoulder belt guide open and • The iZi Up can be placed in two sleeping positions by moving
position the belt in the guide. Make sure the belt is not twisted the recling handle upwards (10).
and close the guide again (7).

(10)

(7)

3- Lock the belt in the buckle, click.

The lap belt should be positioned
over the hips (8). (8)
• Push the seat in the
direction of the green arrow
to return to the upright
position. Remove slack in (11)

click! the belt by pulling the belt

towards the retractor (11).

8 9
 Removing and refitting the cover Warning: potential misuse
Removing the cover • It is NOT ALLOWED to mount the seat in a front !
• Pay attention when you remove the cover, as fitting the cover passenger seat WITH AN ACTIVATED AIRBAG.
is done in the opposite way. • DO NOT guide the car belt around the
• The upholstery of the seat consists of 3 separate parts. reclining handles.
• DO NOT use the seat without the 3-point belt (13).
1- Remove the back rest cover from the seat by open the velcro
at the back, detach the elastic loops from the fixing hooks
and pull the cover carefully from the surrounding rim of the
back rest.
(13)
2- Remove the head rest cover by detaching the elastic loop
from the fixing hooks and pulling the cover carefully from the
surrounding rim of the head rest.
3- Remove the seat cover by detaching the elastic loops from
the fixing hooks and pulling the cover carefully from the
surrounding rim of the seat.
Refit the cover
• Refit the cover, using the previous instructions in
reversed order. Point of sale information
Notice for FORWARD-FACING installation
Cleaning instructions • This is a universal Child Restraint System. It is approved
according to regulation No. 44.04, series of amendments for
• The cover of the seat must be washed according to the general use in vehicles fitted with 3-point car belts, approved
instructions on the inside of the cover (12). to UN/ECE Regulation No. 16 or other equivalent standards.

(12)
wash with similar colours

• DO NOT use any aggressive cleaning agents; these may

harm the construction material of the seat.

10 11
 Important advice Guarantee
! • DO NOT attempt to dismantle, modify or add any part to the • All BeSafe products are carefully designed, manufactured and
seat. Warranty will expire if non-original parts or accessories tested. All of our BeSafe child seats are tested periodically
are used. out of our continuous production in our test laboratory.
• DO NOT use anything, such as a cushion, to raise the child Furthermore they are tested by independent test institutes.
seat off the passenger seat of the vehicle. In an accident the • Should this product prove faulty within 24 months of
seat will not be able to protect your child in the right way. purchase due to materials or manufacturing fault, except
• Never leave your child unattended in the seat. covers and harness straps, please return it to the original
• Make sure all passengers are informed about how to release place of purchase.
your child in case of emergency. • The guarantee is only valid when you use your seat
• An unoccupied child seat should always be fastened in appropriately and with care. Please contact your dealer, he
the vehicle. will decide if the seat will be returned to the manufacturer
• Make sure luggage or other objects are properly secured. for repair. Replacement or return cannot be claimed. The
Unsecured luggage may cause severe injuries to children and guarantee does not get extended through repair.
adults in case of accidents. • The guarantee expires: when there is no receipt, when
• Never use the seat without the cover. The cover is a safety defects are caused by wrong and improper use, when
feature and may only be replaced by an original BeSafe cover. defects are caused by abuse, misuse or negligence.
• Under the cover we use EPS foam. Do not push or pull too
hard against the foam, as you might damage the foam.
• Do not use any aggressive cleaning products; these may harm
the construction material of the seat.
• BeSafe advises that child seats should not be bought or sold
second-hand.
• KEEP this user manual for later use with the seat.
• DO NOT use at home on a table or worktop, as long as your
child is seated in the seat.

Practical advice
When the child seat is mounted in the car check all the areas
where the child seat might touch the interior. We recommend
using a (BeSafe) protection cover in these places to avoid cuts,
marks or discolouration on the interior of the vehicle, especially
in vehicles with leather or wooden interior.

12 13
 B506-8200
N2002180
ECE R44/04
universal
15-36 kg

0444 3713

HTS BeSafe as
N-3535 Krøderen, Norway - www.besafe.eu

14