DIVISION: CNC-Training Systems Concept MILL 250

DATE: September 2012 Page 1 of 27

TECHNICAL SPECIFICATION

Concept MILL 250

PC-controlled CNC – machining center
with interchangeable control

Control software

Sinumerik Operate
SIEMENS 810D/840D
SIEMENS 810/820
GE FANUC Series 21
GE FANUC Series 0
HEIDENHAIN TNC 426/430
EMCOTRONIC TM02
FAGOR 8055 MC

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 2 of 27

Index of contents
Overview of the modular machine concept .........................................................................3
Technical data of the machine: ............................................................................................4
Basic machines Concept MILL 250 .....................................................................................7
Technical data of the PC control system .............................................................................8
Description MOC III..............................................................................................................8
Clamping devices for workpieces ..................................................................................... 10
Tool holder ........................................................................................................................ 15
Cutting tools ...................................................................................................................... 17
Drilling Tools ..................................................................................................................... 19
Milling cutters with Carbide Plates .................................................................................... 20
Accessories ....................................................................................................................... 21
Setting tools ...................................................................................................................... 22
Accessories for automation .............................................................................................. 23
Manuals ............................................................................................................................ 24
Courseware ....................................................................................................................... 26
E[MCO] Campus – .................................................................................................... 26
Catalogues ........................................................................................................................ 27
Packing ............................................................................................................................. 27

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 3 of 27

Overview of the modular machine concept

Concept Mill 250

Concept Mill 250 Concept Mill 250

Max speed 10.000 rpm
Power 7 kW Still open
20-stations tool magazine

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 4 of 27

Technical data of the machine:

Working area
Travel X [mm] 350
Travel Y [mm] 250
Travel Z [mm] 300
Effective Z-stroke [mm] 300
Distance spindle nose – table surface [mm] 120 - 420
Milling table
Clamping surface (L x W) [mm] 520 x 300
Max. table load [kg] 100
5 T-slots according Din 650 [mm] 12
Distance of T-slots [mm] 45
Milling spindle
Spindle
Bearing
bearing
Front bearing diameter [mm] ø 45
Tool holding fixture according to ISO DIN 69871-A SK30
Draw bolts ISO DIN 69872 (similar to ISO 7388/2 type A) M12
Tool clamping Automatic
Milling spindle drive
Asynchronous AC-motor, power (100% duty cycle) [kW] 7
Speed range (step less) [rpm] 150-10,000
Max. torque ( 60% duty cycle) [Nm] 41
Feed drives (Servo motors)
Feed [m/min] 0 – 10
Rapid traverse in X/Y/Z axis [m/min] 15
Max. feed force [N] 2400
Positioning variation according to VDI 3441 in X / Y [mm] 0.004
Positioning variation according to VDI 3441 in Z [mm] 0.004
Tool system (20 tool magazine)
Tool magazine Drum turret
Number of tool stations 20
Entry force [N] 1040
Max. admissible tool weight [kg] 5
Max. tool diameter (* with free adjacent magazine place) [mm] 63 (*80)
Max. tool length [mm] 200
Turret indexing time [s] 2.5

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 5 of 27

Cutting performance
Drilling in steel [mm] ø 16
Tapping in steel M10
Lubrication system
Linear roller and ball screw spindle Automatic oil-lubrication
Lifetime grease
Main spindle bearing
lubrication
Basic pneumatic (standard included in basic machine)
Pneumatic service unit for tool taper blow-out device (with filter)
Supply pressure [bar] 6
Air hose connection [mm] ø 10
cleanliness class 4
Compressed air quality
(ISO 8573-1)
Coolant equipment (option)
Tank volume [l] 140
Max. coolant velocity at 3.5/ 1 bar [l/min] 15/ 65
Max. pressure at 50Hz [bar] 3.5
Automatic clamping devices (option)
Pneumatic vice including blow-out device
Clamping width [mm] 125
Width of jaws [mm] 125
C-axis / NC-dividing head (option)
Resolution [°] 0.01
Max. speed [rpm] 44
Max. torque of feed [Nm] 20
Painting
light gray RAL Nr. 7035
traffic red RAL Nr. 3020
graphite gray RAL Nr. 7024
Electrical connection
Voltage supply [V] 400 3/N/PE
Max. admissible voltage fluctuation [%] +10/-10
Frequency [Hz] 50/60
Connection value [kVA] 9
Main fuse [A] 20

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 6 of 27

Dimensions/weight
1600 x 1700 x
Machine dimensions (L x W x H) [mm]
2200
Machine weight [kg] 1970
Machine acceptance
According Din 8615, part 1
Sound pressure level
Main sound pressure level [db(A)] 78
At following conditions:
Measuring method: Envelope surface measuring method acc.to DIN 45 635
Measuring point: 1m distance and 1,6m over floor
Operating status: max.spindle speed at idle running
Safety rules / norms
According to EEC / CE rules
EN60204 part 1, DIN12100 1/2
EEC machine guiding rules appendix 1

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 7 of 27

Basic machines Concept MILL 250

DESCRIPTION REF.NO.

EMCO Concept MILL 250

PC-controlled CNC – machining center with

interchangeable control:

Max. Speed 10,000 rpm

Power 7 kW Q4A P02
20-station tool drum
Travel X: 350 mm
Travel Y: 250 mm
Travel Z: 300 mm
Clamping surface 500 x 300 mm
Machine lamp
Central lubrication
Fully enclosed including chip tray
Integrated PC
12“ flat display
Safety devices according to CE
1 x USB-Plug on the front
Ethernet-connection included (electrical cabinet)

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 8 of 27

Technical data of the PC control system

Control system

Separate built-up of the machine operating keyboard and control-specific interchangeable keyboard
Control-specific keyboard
Integrated PC
Integrated 12” colour flat display

Description MOC III

Multi Operating Controller

Function
The MOC is an industrial PC with an integrated LCD monitor.
Its special construction protects it from vibration and the harsh conditions in the workshop.
By a free LAN port of the MOC can be easily integrated into an existing network.
Easy data transfer via USB.

PC- Configuration

Technical Parameters:

Processor
1.6 GHz AMD / dual core
1GB RAM
4GB Compact Flash
1xRS232
1 x USB
2x LAN
PS2 Mouse + Keyboard (US)
TFT 12,1“ integated
Temperature range 5-50°C
MS Windows 7 embedded

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 9 of 27

Software (32bit and 64bit)

EMCO WinNC – control software,

machine license

In case of order please indicate required control:

Sinumerik Operate X3Y 400

SIEMENS 810/820 X5A C00
SIEMENS 810D/840D X3Y 200
GE FANUC Series 0 X5A C50
GE FANUC Series 21 X3Y 300
EMCOTRONIC M02 X5A E00
HEIDENHAIN TNC 426/430 X3A 200
FAGOR 8055 MC X3A 300

EMCO Win 3D-View, milling (32bit and 64bit)

3D-graphic simulation, option for WinNC X5A 260

EMCO 3D-View, milling, machine license

Control keyboard – key module

Sinumerik Operate X9Z 060

SIEMENS 810 X9Z 010N
SIEMENS 820 X9Z 020N
SIEMENS 810D/840D X9Z 040N
GE FANUC Series 0 X9Z 110N
GE FANUC Series 21 X9Z 130N
EMCOTRONIC TM02 X9Z 210N
HEIDENHAIN TNC 426/430 X9Z 426N
FAGOR 8055 MC X9Z 055N

CADCAM for 5 Axis milling for 5th axis

ESPRIT Educational license

Single license per station 224200

SMC single license per station / year 224210
USB Dongle for ESPRIT license 224220

Postprocessor for WinNC Sinumerik840D 5 Axis 223 897

Please find further details about our CADCAM

products in our specifications „spec_cadcam_en“

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 10 of 27

Clamping devices for workpieces

DESCRIPTION REF.NO.

Machine vice, mechanic

Clamping width 90 mm
Width of jaws 90 mm 781 000

Can be mounted in X and Y direction.

Machine vice, mechanic

Clamping width: 125 mm

Width of jaws: 110 mm 781010

Can be mounted only in X direction.

Machine vice, hydraulic

Hydraulic high-pressure clamping device, manual.

Clamping width: 170 mm 781080

Width of jaws: 110 mm

Can be mounted only in X direction.

Machine vice MSR 125, mechanic

Complete with clamps, stepped clamping shoes 781040

and necessary tools.

Hight of Clamps 40 mm
Clamping width 150 mm
Width of jaws: 125 mm

Stepped clamp for fix clamp

Stepped clamp for fix clamp 781050

Option for 781040

Stepped clamp for movable clamp

Stepped clamp for movable clamp 781060

Option for 781040

Prism clamp with step for movable clamp

Prism clamp with step for movable clamp 781070

Option for 781040

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 11 of 27

Stepped clamping shoe

Complete with clamping screw.

Clamping range: 15 - 58 mm F3Z 210

Clamping range: 50 – 125 mm F3Z 220

3-jaw lathe chuck

Röhm-chuck ø 125 mm
V1D 106R
Including 1 set of hardened external and internal
jaws.

Adapter plate

Required for mounting the chuck # V1D 106R on

the milling table. F3Z 230

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 12 of 27

DESCRIPTION REF.NO.

SPINDLE SPEEDER 20.000 U/min

High speed tool spindle mounted in the milling
spindle, with locking bracket,
Speed ratio: 1:5
Q4Z 010
Length spindle nose - end of collet: 134 mm
To be used with ER11 Collets

Factory option

DESCRIPTION REF.NO.

NC-dividing head (4th axis)

(without chuck)

Including:
Dividing head WALTER TANI 80 NEG,
clamping screws and clamping shoes,
necessary for the mounting on milling table Q4Z 690

Kind of clamping: pneumatically

Necessary pressure: 6 bar
Dividing precision: +/- 60”
Repeating accuracy: +/- 10”
Spindle height: 80 mm
Bore ø 24 mm
Total height: 136 mm
No control possible with EMCOTRONIC

Factory installed only !!

Manual 3-jaw lathe chuck with flange for NC-
dividing head Q4Z 690

Manual chuck including 1 set of outside and inside Q1Z 600

jaws.

Chuck ø 82 mm
Bore ø 18 mm
Manual tailstock for NC-dividing head to use
with NC-dividing head Q4Z 690

Manual tailstock including live center MT 1. Q1Z 610

Center height 80 mm
Mounting length: 110 mm
Total length: 200 mm
Total height: 93 mm
Quill stroke: about 15 mm

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 13 of 27

DESCRIPTION REF.NO.

NC-Dividing head (4th axis) without chuck and

without flange
Including:
Dividing head WALTER TANI 100 NEG,
Clamping screws and clamping shoes,
Necessary for the mounting on milling table Q4Z 590
Kind of clamping: pneumatically
Necessary pressure: 6 bar
Dividing precision: +/- 60”
Repeating accuracy: +/- 10”
Spindle height: 100 mm
Bore ø 32 mm
Total height: 171 mm

Factory option!
MANUAL THREE JAW CHUCK
WITHOUT FLANGE FOR NC-DIVIDING HEAD
Q4Z 590 and Q4Z 820 and Q4Z 825000
V4W 186R
Manual chuck including 1 set of outside and inside
jaws.
Chuck ø 82 mm
Bore ø 18 mm Retrofitable
MANUAL THREE JAW CHUCK WITHOUT
FLANGE FOR NC-DIVIDING HEAD Q4Z 590

Manual chuck including 1 set of outside and inside A8Z 060

jaws.
Chuck ø 100 mm
Bore ø 17 mm

Retrofitable
FLANGE FOR NC-DIVIDING HEAD Q4Z 590

With this adapter Flange the chucks

V4W 186R and A8Z 060 can be mounted onto the Q4Z 600
NC-dividing head TANI 100.

Retrofitable
Manual tailstock for NC-dividing head to use
with NC-dividing head Q4Z 590

Manual tailstock including live center MT 1. Q4Z 610

Center height 100 mm
Mounting length: 110 mm
Total length: 200 mm
Total height: 113 mm
Quill stroke: about 15 mm

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 14 of 27

DESCRIPTION REF.NO.

5th axis turntable

(without chuck but with flange)

Spindle speed A axis 10 rpm

Spindle speed B axis 15 rpm
rated torque A/B axis: 50 Nm Q4Z 820
Weight: 17 kg
Size: X / Y / Z = 520 / 260 / 150 mm
Swivelling height: 80 mm
Swivelling area of 4th axis: max.± 95°, depending
on workpiece size
Motors:: 3 Phase Stepper

Factory installed only!!

ONLY for WinNC Sinumerik 810/840 D and
WinNC HH TNC 426/430!!
Electrical preparation for 5th axis turntable

Enables simple and less Prepares the Mill250 for connection with the Q4Z 710
expensive refitting of the 5th mechanical turntable.
axis, when budget splitting is
necessary!

Retrofit able by EMCO technician!!

Mechanic of 5th axis turntable

(without chuck but with flange)
th
Installation on the CM250 by Completes the preparation of the 5 axis Q4Z825000
plug in! Q4Z710 installation necessary!

MANUAL THREE JAW CHUCK

WITHOUT FLANGE FOR NC-DIVIDING HEAD Q4Z 590 and Q4Z 820
and Q4Z 825000

Manual chuck including 1 set of outside and inside V4W 186R

jaws.
Chuck ø 82 mm
Bore ø 18 mm Retrofitable
Soft jaws

for V4W 186R V0W 013R

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 15 of 27

Tool holder
DESCRIPTION REF.NO.

PULL STUD for SK 30 DIN 69872A

Single pull stud for SK30

tool holder. 250 180
connecting thread M12

REQUIRED FOR ALL TOOL HOLDERS!

Tool holder package CM250
consisting of:
Shell end mill arbor 16 - 1x
Shell end mill arbor 22 - 1x
250 300
Collet holder ESX25 - 4x
Shaft mill arbor 10 - 1x
Shaft mill arbor 16 - 1x
Balanced.

Use only holders, balanced G 2,5 at

10.000 rpm or G 6,3 at 20.000 rpm.!

Pull studs not included, please order

for each tool holder one pull stud!
Collet chuck SK 30 DIN69871

To be used with ESX 25 collets.

Including clamping screw and drive key.
Balanced.
250 100

Use only holders, balanced G 2,5 at 10.000 rpm or

G 6,3 at 20.000 rpm.!

Pull studs not included, please order for each

tool holder one pull stud!
Collets (set)

Set of 14 collets, type ESX 25.

Diameter 2 - 14 mm 225 000

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 16 of 27

DESCRIPTION REF.NO.

Collets (individual)
Type ESX 25

ø 1 mm 225 010
ø 2 mm 225 020
ø 2,5 mm 225 025

ø 3 mm 225 030
ø 4 mm 225 040
ø 5 mm 225 050

ø 6 mm 225 060
ø 7 mm 225 070
ø 8 mm 225 080

ø 9 mm 225 090
ø 10 mm 225 100
ø 11 mm 225 110

ø 12 mm 225 120
ø 13 mm 225 130
ø 14 mm 225 140

ø 15 mm 225 150
ø 16 mm 225 160

Milling arbor SK30 DIN69871

For milling cutters with 16 mm bore (Heavy duty

shell end mill # 764 410), including key and milling 250 110
arbor collars.

For milling cutters with 22 mm bore

(for Face mill cutter # 764 800, Edge mill cutter 250 120
764810), including key and milling arbor collars.
Balanced.

Use only holders, balanced G 2,5 at 10.000 rpm or

G 6,3 at 20.000 rpm.!

Pull studs not included, please order for each

tool holder one pull stud!
Mill arbor
For mill cutters with:

Shank ø10 mm 250 130

Shank ø12 mm 250 140
Shank ø16 mm 250 150
Shank ø20 mm 250 160

Balanced.

Use only holders, balanced G 2,5 at 10.000 rpm or

G 6,3 at 20.000 rpm.!

Pull studs not included, please order for each

tool holder one pull stud!

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 17 of 27

Morse Taper Holder MT2 SK30 DIN69871

Short insert bushing MT-2.

Special use for twist drills with MT-2 fixture. 250 170
Balanced.

Use only holders, balanced G 2,5 at 10.000 rpm or

G 6,3 at 20.000 rpm.!

Pull studs not included, please order for each

tool holder one pull stud!

Cutting tools
DESCRIPTION REF.NO.

Tool Package “Basic” CM250

with
Q4Z 910
1 # 225 000 Set Of Collets 14 pcs.
1 # 225 060 Collet 6mm
1 # 225 100 Collet 10mm
4 # 250 100 Collet Chuck SK 30 DIN69871
1 # 250 110 Milling Arbor D 16mm
2 # 250 130 Mill Arbor D 10mm
1 # 250 150 Mill Arbor D 16mm
8 # 250 180 Pull Stud SK30 DIN 69872A
1 # 764 301 Slot End Mill 3mm
1 # 764 303 Slot End Mill 5mm
1 # 764 308 Slot End Mill 10mm
1 # 764 410 Heavy Duty Shell End Mill
1 # 771 010 NC-start Drill
1 # 771 030 Radius Milling Cutter 6mm
1 # 771 050 Angle Milling Cutter
1 # 781 152 Heavy Duty Shank End Mill
1 # 781 280 Twist Drills 25 pcs.

Tool Package “Extended” CM250

with
Q4Z 920
1# 225 000 Set Of Collets 14 pcs.
2# 225 060 Collet 6mm
2# 225 100 Collet 10mm
1# 225 160 Collet 16mm
2# 250 100 Collet Chuck SK 30 DIN69871
1# 250 120 Milling Arbor D 22mm
1# 250 140 Mill Arbor D 12mm
1# 250 150 Mill Arbor D 16mm
14 # 250 180 Pull Stud SK30 DIN 69872A
1# 250 300 Tool Holder Package SK30
1# 271 230 Drills For Core Holes 6 pcs.
2# 764 301 Slot End Mill 3mm
2# 764 303 Slot End Mill 5mm
Subject to technical modifications.
 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 18 of 27

2# 764 308 Slot End Mill 10mm

1# 764 800 Face Mill Cutter 50mm
1# 764 810 Edge Mill Cutter 50mm
1# 764 820 Carbide Plates for 764 800
1# 764 830 Carbide Plates for 764 810
1# 764 850 Slot Mill Cutter 16mm
1# 764 860 Carbide Plates for 764 850
1# 771 010 NC-start Drill
1# 771 040 Radius Milling Cutter 12mm
1# 771 050 Angle Milling Cutter
2# 781 152 Heavy Duty Shank End Mill 10mm
1# 781 280 Twist Drills 25 pcs.
1# 781 300 Set Of Screw Taps M3 - M8

Heavy duty shell end mill, HSS

With roughing/ finishing teeth. 764 410

ø 40 x 20 mm, bore hole ø 16 mm

Slot end mill, HSS

According to DIN 327, shape B

Cutting - ø3 mm / Shank - ø6 mm 764 301

Cutting - ø4 mm / Shank - ø6 mm 764 302
Cutting - ø5 mm / Shank - ø6 mm 764 303
Cutting - ø6 mm / Shank - ø6 mm 764 304
Cutting - ø8 mm / Shank - ø8 mm 764 306
Cutting - ø10 mm / Shank - ø10 mm 764 308
Cutting - ø12 mm / Shank - ø12 mm 773 100
Cutting - ø16 mm / Shank - ø16 mm 773 105

Heavy duty shank end mill, HSS

According to DIN 844, shape A

Cutting - ø8 mm / Shank - ø8 mm 764 200

Cutting - ø10 mm / Shank - ø10 mm 781 152
Cutting - ø12 mm / Shank - ø12 mm 781 151
Cutting - ø16 mm / Shank - ø16 mm 771 020

Radius milling cutter, HSS

Two edged, with parallel shank.

Shank – ø6 mm 771 030

Shank - ø12 mm 771 040

Angle milling cutter, HSS

According to DIN 1833, shape A 764 400

60°, ø16 mm, shank- ø12mm

Angle milling cutter, HSS

According to DIN 1833, shape B 771 050

45°, ø16x4 mm, shank ø12mm

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 19 of 27

Drilling Tools
DESCRIPTION REF.NO.

NC-start drill, HSS

Shank ø10 mm, acute angle 120° 771 010

Center drill, HSS

ø6,3 mm 573 770

A8, DIN 333 271 220

Twist drills, HSS

25 twist drills ø1-13 mm, (0.5 mm graded) 781 280

9 twist drills ø2-10 mm, (1 mm graded) 260 628

Twist drills for core holes, HSS

6 twist drills for core holes ø2.5 - ø8.5 mm 271 230

Screw taps, HSS

According to DIN 352 / 371

Set of 5 screw taps M3 - M8 781 300

Screw taps M3 (shank ø 3,5 mm) 781 301

Screw taps M4 (shank ø 4,5 mm) 781 302
Screw taps M5 (shank ø 6 mm) 781 303
Screw taps M6 (shank ø 6 mm) 781 304
Screw taps M8 (shank ø 6 mm) 781 305
Screw taps M10 (shank ø 7 mm) 781 306

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 20 of 27

Milling cutters with Carbide Plates

DESCRIPTION REF.NO.

Edge mill cutter 50mm, for CPL

Cutting edge: 90° 764 810
Ø50 x 15 mm, shaft ID ø22mm
90EA.050R.P16
required milling arbor: 250 120 + 250 180
CPL, carbide plates for edge mill cutter 764810
APFT1604PDFR AK10F 764 830
1 package unit = 10 pcs.

Face mill cutter 50mm, für CPL

Cutting edge: 45° 764 800
Ø50 x 63 mm, shaft ID ø22mm
75PA.50R.E12
required milling arbor: 250 120 + 250 180
CPL, carbide plates for face mill cutter 764800
SEKR1203AFFN AK10F 764 820
1 package unit = 10 pcs.

Slot mill cutter, ø 16mm

90ES.016R.P10 764 850
required mill arbor: 250 140 + 250 180
CPL, carbide plates for slot mill cutter 7648__
APKT1003PDER AM26C 764 860
1 package unit = 10 pcs.

Thread mill cutter, ø 12mm

TCM12-2 for CPL 764 910
required mill arbor 250 140 + 250 180

Carbide plates for thread cutter 764910

P=1,5mm
for outside thread: 11E-ISO1,5TM AK20 764 920
for inside thread: 11I-ISO1,5TM AK20 764 930
1 package unit = 5 pcs.

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 21 of 27

Accessories
DESCRIPTION REF.NO.

Coolant euipment

Coolant equipment including pump and tray for

140l tank volume and a pump capacity of 20 l/min.

Q4Z 090

Factory installed only!!

Electronical handwheel

For moving the machine’s axes manually to Q1Z 340

proceed zero point- and tool offsets

Retrofit able by EMCO technician!!

CHIP CONVEYOR CM250 - 500MM

Hinge type chip conveyor, dump-height 500mm, Q4Z 850
suitable for:

Long steel shavings

Snarl chips
Wool chips
Dry- and wet machining

Factory installed only !!

COOLANT PISTOL

To clean the machining area from chips with

coolant. R6Z 140
(Note: never use air to clean the machine!))

Retrofit able through EMCO technician !!

AIR CONDITIONER (ELECTRICAL CABINET)

Seals the cabinet and keeps temperature constant; A8Z 130

necessary for extreme environmental conditions
(tropical climate) or graphite or cast work.

Factory installed only !

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 22 of 27

MACHINE INSTALLATION KIT

Consisting of: S6Z 460

4x vibration absorbing, height adjustable

levelling elements 881500
4x angle plates to fasten the machine to the
floor
4x anchor bolts to lag the machine to the floor

Levelling element

1 piece, 881 500

4 pieces required.

FI-protection switch

Leakage current circuit breaker 63/4 PO ZME280720

Machine Status Lamp

Triple color machine lamp to indicate the status of R7Z 030

the machine (red, green and white).

Setting tools
DESCRIPTION REF.NO.

Dial gauge with magnetic stand

Outside ring ø58 mm, division 0,01 mm, 565 065

measuring range 10 mm, with shock protection.

Edge indicator

Probe ø4 / ø10 mm F1Z 090

Shank ø10 mm

3D sensor

incl. short probe tip ø4 mm 764 841

clamping shank ø10 mm

requires tool holder: 250 130 or

collet chuck 250 100 together with
collet ø 10 mm 225 100

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 23 of 27

Accessories for automation

DESCRIPTION REF.NO.

Automatic door

Including stroke control and safety equipment. Q4Z 040

Motor and housing for transport removeable.
Additional height: 135mm

Factory installed only!!

Pneumatic machine vice
Type Gressel
Including stroke control and blow-out device

Width of jaws: 125 mm

Opening of jaws: max. 130 mm Q4Z 520
Total length: 466 mm
Total height: 84 mm
Clamping force: 1200 – 5500 N
Pneumatic pressure: 2-8 bar

Factory installed only!!

FOOT PEDAL SWITCH

for Pneumatic machine vice R3Z 580

Retrofit by EMCO specialist!

Robotics-Interface hardware

Necessary for the FMS/CIM – operation. Q4Z 530

(required X1A 000)

Robotics-Interface software

Necessary for the FMS/CIM – operation.

(required Q4Z 530) X1A 000

DNC-Interface

Enables the remote control of WinNC via a X5A 050

software-protocol.
The communication is done via the RS 232
interface.
With Siemens 810/840D communication via
TCP/IP is possible.
Not available for Heidenhain TNC426/430 and
Fagor 8055 MC

Assembling of automation accessories only ex factory – no retrofitting possible.

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 24 of 27

Manuals
DESCRIPTION REF.NO.

Operating manual Concept MILL 250

German DE 2250
English EN 2250
French FR 2250
Spanish SP 2250
Italian TA 2250
Dutch HL 2250

Operating manual Win3D-View

EMCO Win3D-View – milling DE 1826

EN 1826
FR 1826
SP 1826
HL 1826
TA 1826

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 25 of 27

Programming instruction

WinNC SINUMERIK OPERATE DE 1848

EN 1848

WinNC SIEMENS 810/820 M DE 1803

EN 1803
FR 1803
SP 1803
TA 1803
HL 1803

WinNC SIEMENS 810D/840D-M DE 1814

EN 1814
FR 1814
SP 1814
TA 1814
HL 1814

WinNC GE FANUC Series 0-M DE 1801

EN 1801
FR 1801
SP 1801
TA 1801
HL 1801

WinNC GE FANUC Series 21-M DE 1901

EN 1901
FR 1901
SP 1901
TA 1901
HL 1901
WinNC EMCOTRONIC M02
DE 1800
EN 1800
FR 1800
HL 1800
SP 1800
TA 1800

WinNC HEIDENHAIN TNC 426/430 DE 1816

EN 1816
FR 1816
SP 1816
HL 1816
TA 1816

FAGOR 8055 MC DE 1818

EN 1818
FR 1818
SP 1818
HL 1818
TA 1818

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 26 of 27

Courseware
Description Ref.-No.

E[MCO] Campus
E-Learning 2.0 for machining.
Multimedia teaching and
learning materials
for CNC training.

E[MCO] Campus –
is a multimedia training program that teaches all the
basics of modern CNC technology.
The cleverly-designed teaching format makes even
complex concepts easy to grasp and learn.
Interactive dialog features allow students to
progress at their own pace. Views are displayed
using attractive 2 and 3D graphics, animations, and
videos, sustainably improving the success of the
learning process.

Languages:

German
English

Single-user license X2Y 400

Multi-user license 20 X2Y 410
Multi-user license 50 X2Y 420
Multi-user license 100 X2Y 430
Campus-license On
A Campus-License consists of several
request
Multiple licenses.
The Software is working without any time
restriction, a renewal of the version is not
necessary.
A Software Maintenance Contract (SMC) is
not available right now.

Subject to technical modifications.

 DIVISION: CNC-Training Systems Concept MILL 250
DATE: September 2012 Page 27 of 27

Catalogues
DESCRIPTION REF.NO.

„EMCONOMY moves“
DE 2801
Format A4 EN 2801
FR 2801
SP 2801
RU 2801
CZ 2801

CONCEPT MILL 250

DE 4536
EN 4536
TA 4536
SP 4536
FR 4536

EMCO Industrial Training

DE 1837
EN 1837
TA 1837
SP 1837

Packing
DESCRIPTION REF.NO.

Standard packing
ZVZ341855
Consisting of: skid and Rolamit cover
Climate packing

Pallet, Alu-bandage, various accessories ZVP547190

Seaworthy packing

(as option to Standard- and Climate packing) ZVP301855

Subject to technical modifications.