OCEAN CONTROLS - Introduction

September 2008 MICROCONTROLLER PROGRAMMERS—35

Dear Customers
MOTOR CONTROLLERS—37
New things that we added to our catalog this month are
Logomatic V2 Serial Datalogger page 18
XMP3 Dual Pump Controller page 58
New Version of ModbusView Software MOTORS—47
XBEE Wireless Modules page 16
New Relay Cards page 55
Matbotix EZ0 Ultrasonic Range Finder page 67
UHF Serial Transmitter Receiver page 15 SOFTWARE—51
Modbus to Weather Station Card page 28
Anemometer Interface Card page 28

We are continually adding new products to our website and we will be

expanding the catalogue throughout the coming years. RELAYS AND RELAY CARDS—53
Not all our products are shown in the catalog. To see the full range
and to view more details about our products please visit our website at
www.oceancontrols.com.au
FANS-56
Please note all prices are in Australian dollars and are ex GST.
Australian customers should add 10% to the price when purchas-
ing goods
PLC - PROGRAMMABLE CONTROLLERS-57
www.oceancontrols.com.au
Ocean Controls
PO Box 2191
Seaford BC
Factory 3, 24 Wise Ave PANEL METERS—63
Seaford
Vic, Australia 3198

Ph +61 3 9782 5882 Fax +61 3 9782 5517 SIGNAL CONDITIONERS—66

email info@oceancontrols.com.au

DATA ACQUISITION—2 SENSORS—67

COMPUTER PARTS—8 SWITCHMODE POWER SUPPLIES—74

COMMUNICATIONS—10 POWER SUPPLIES AND BATTERY CHARGERS— 76

DATALOGGERS—17 TEST EQUIPMENT—79

AUDIO—83
CONTROLLERS RELAY & REMOTE —19

CONTROLLERS TEMPERATURE & PROCESS —24

COUNTERS AND TIMERS—29

ELECTRICAL PARTS—32

Page 1 Ocean Controls Catalog 2008

 OCEAN CONTROLS - DATA ACQUISITION
LabJack U12 CB-25
USB-based multifunction data acquisition and control device Labjack Terminal Board

Features: Most of the connections on the

8 Single-Ended, 4 Differential 12-Bit Ana- LabJack U12 have built-in screw
log Inputs terminals, but 16 of the digital I/O
±10 Volt Analog Input Range are accessed with a DB-25 connec-
PGA with Gains of 1, 2, 4, 5, 8, 10, 16, or tor. To ease the use of these digital
20 V/V ports the CB25 provides screw
Up to 8 kSamples/Sec (Burst) or 1.2 terminal connections. It also pro-
kSamples/Second (Stream) vides short-circuit/overvoltage pro-
Supports Software or Hardware Timed tection for the 16 I/O which are
Acquisition accessed through the DB25 con-
Supports Triggered Acquisition nector.
2 Analog Outputs
20 Digital I/O (Up to 50 Hz per I/O)
32-Bit Counter.
Software is included including activex component

Price Each 1 5+ Price Each 1 5+

LAJ-001 $195.00 POA LAJ-002 $75.00 POA

CB-37 Labjack UE9 Terminal Board

LabJack UE9 and UE9-Pro EB-37 Experiment Board
USB/Ethernet data acquisition module
The CB37 Provides convenient
screw terminals for the DB37 con-
A high speed and accurate data acquisi- nector on the LabJack UE9. The
tion module. The UE9-Pro has all the CB37 can connect directly to the
features of the normal UE9 with the addi- UE9.
tion of an auxiliary low-speed hi-resolution
(24-bit) sigma-delta ADC.
The EB37 experiment board con-
nects to the LabJack UE9’s DB37
Features:
connector and provides convenient
14 Analog Inputs (12-16 bits depending
screw terminal access. Also pro-
on speed
vided is a solderless breadboard
±5 or 0-5 Volt Maximum Analog Input
and useful power supplies (+/-10
Range
volts, 3.3 volts, and 1.25 volts).
Analog Input Streaming upto 50KHz (Ethernet)
Includes a screwdriver, power sup-
2 Analog Outputs
ply, and jumper wires. For the Lab-
2 Counters (32 Bits)
Jack UE9 only.
23 Digital I/O
Supports Software or Hardware Timed Acquisition
Copy of DaqFactory Express, Labview Drivers and ActiveX component
Price Each 1 5+
Price Each 1 5+ LAJ-012 CB-37 Terminal Board $89.00 POA
LAJ-011 Labjack UE9 $599.00 POA LAJ-013 EB-37 Development Board $159.00 POA
LAJ-015 Labjack UE9-Pro $729.00 POA

LabJack U3 USB Data Acquisition Module LV LabJack U3 USB Data Acquisition Module HV

Features:
Differences with the HV (High-Voltage) Version:
- 16 Flexible I/O (Digital Input, Digital Output, or Analog Input)
- First 4 Flexible I/O are Changed to Dedicated HV
- Up to 2 Timers (Pulse Counting/Timing, PWM Output, Quadra-
Analog Inputs.
ture Input)
- 4 HV Inputs have ±10 Volt or -10/+20 Volt Range.
- Up to 2 Counters (32-Bits Each)
- 12 LV Inputs (Flexible I/O) Still Available, for 16
- 4 Additional Digital I/O
- Up to 16 12-bit Analog Inputs (0-2.4 V or 0-3.6 V, SE or Diff.) Total Analog Inputs.-
- 2 Analog Outputs (10-Bit, 0-5 volts)
- Supports SPI, I2C, and Asynchronous Serial Protocols (Master
Only)
- Built-In Screw Terminals for Some Signals
- USB 2.0/1.1 Full Speed Interface
- Powered by USB Cable
- Drivers Available for Windows, Linux, Mac and Pocket PC
- Examples Available for C/C++, VB, LabVIEW, Java, and More
- Includes Licensed Copy of DAQFactory Express Software (Win2000/XP)
- Includes USB Cable and Screwdriver
- Free Firmware Upgrades
- Money Back Guarantee Price Each 1 5+
- Enclosure Size Approximately 3" x 4.5" x 1.2" (75mm x 115mm x 30mm) LAJ-021 Labjack U3 USB Data Acquisition Module LV $159.00 POA
- Rated for Industrial Temperature Range (-40 to +85 Degrees C) LAJ-022 Labjack U3 USB Data Acquisition Module HV $159.00 POA

Page 2 Ocean Controls Catalog 2008

 OCEAN CONTROLS - DATA ACQUISITION
CB-15 Labjack U3 Terminal Board
Labjack LJTick—InAmp

Provides convenient screw terminals Signal-conditioning module provides

for the DB15 connector on the LabJack two instrumentation amplifiers ideal
U3 and UE9. The CB15 can connect for low-level signals such as bridge
directly to the U3 and UE9 circuits (e.g. strain gauges) and
on the LabJack UE9. thermocouples. The LJTIA has
switches to choose from 5 gain
settings (x1, x11, x51, x201, or cus-
Price Each 1 5+ tom) and two output voltage offsets. The 4-pin design plugs into the
LAJ-012 CB-15 Terminal Board $84.00 POA standard AIN/AIN/GND/VS screw terminal block found on newer Lab-
Jacks such as the U3 and UE9. (RoHS=YES).

Labjack LJTick—Divider Price Each 1 5+

LAJ-031 LJTick-InAmp $89.00 POA
The LJTick-Divider (LJTD) is a signal-
conditioning module designed to di- Labjack LJTick—RelayDriver
vide 2 single-ended channels of 0-10
volt analog signals down to 0-2.5 volt
signals. It is suitable for use with the The LJTick-RelayDriver (LJTRD) allows
Labjack U3 and UE9. The 4-pin de- 2 digital I/O lines on a Labjack U3 or
sign plugs into the standard AIN/AIN/ UE9 to control a relay or other moderate
GND/VS screw terminal block found on newer LabJacks such as the U3 load up to 50V/200mA.
and UE9. The use of large resistors and a precision op-amp buffer pro-
vide an input impedance of 1 MW. By adding or replacing resistors,
many other configurations are possible, such as a level shifter that con- Price Each 1 5+
verts ±10 volts to 0-2.5 volts. LAJ-032 LJTick-InAmp $27.50 POA

Price Each 1 5+
LAJ-030 LJTick-Divider $49.00 POA Labjack LJTick—Current Shunt

The LJTick-CurrentShunt (LJTCS) is a

signal-conditioning module designed to
convert a 4-20 mA current loop input signal
Dual DC Amplifier into a 0.47-2.36 volt signal compatible with
the LabJack U3 or UE9. The 4-pin design
plugs into the standard AIN/AIN/GND/VS
Our dual amplifier or voltage divider module screw terminal block found on newer Lab-
allows you to amplify signals by a factor of 1.5 Jacks such as the U3 and UE9.
to x10 or reduce signals by a factor 0.667 to
0.1 You can easily convert 4 to 20mA signals Price Each 1 5+
to a voltage. LAJ-034 LJTick-Current Shunt $69.00 POA
The dual DC amplifier circuit consists of two
non inverting amplifiers (OP1 and OP2) with a
voltage divider at the input. Labjack LJTick—Proto
Each amplifier is identical in design and is
issued with one 50K potentiometer. Whether
the circuit amplifies or reduces the amplitude The LJTick-Proto (LJTP) consists of an 8x8
of the signal depends on where the 50K po- grid of holes for prototyping custom signal-
tentiometer is placed on the circuit. A simple jumper allows the circuit to conditioning ticks for the LabJack U3 or UE9.
operate off a 9 to 24V supply for amplification of unipolar signals or it
can be powered by a +/-9 to 15V supply for amplification of bipolar sig-
nals.
You can purchase the dual amplifier module as a kit or fully assembled Price Each 1 5+
and tested. If you are purchasing it assembled and tested it comes in 3 LAJ-033 LJTick-Proto $22.50 POA
forms
- Dual Amplifier
- Dual Voltage Divider Dual Instrument Amplifier
- Amplifier and Voltage Divider
If you require 4-20mA conversion to voltage contact us with your re- A dual instrumentation amplifier from Electronic
quired voltage output. Innovations Corp provides 2 high-impedance
The card also has optional DIN rail mounts differential inputs. Operates from a single 5 volt
supply and provides a +/- 15 volt supply and a
Price Each 1 5+ 4.096 volt reference. Analog input range is +/- 10
KIT-200 Dual Amplifier as a kit $39.00 $35.10 volts. The gain of each channel is set to 1, 10,
KTA-201 Dual Amplifier Assembled $55.00 $49.50 100, or 1000 via digital I/O or jumper wires. Typi-
KTA-202 Dual Volt Divider Assembled $55.00 $49.50 cal current requirement is about 80 mA @ 5 volts, allowing the EI-1040
KTA-203 Dual Amp & Volt Divider Assembled $55.00 $49.50 to be powered from a +5V terminal on the LabJack U12.
KIT-204 DIN Rail Mount $13.50 $12.10 Can be used with the Labjack U12, U3 or UE9

Price Each 1 5+
LAJ-004 Dual Instrumentation Amp $175.00 POA

Page 3 Ocean Controls Catalog 2008

 OCEAN CONTROLS - DATA ACQUISITION
Stainless Steel Temperature Probe Temperature Probe –40 to 100 degC

An easy to use, very accurate, and water- An inexpensive and easy to use tempera-
proof temperature probe from Electronic ture probe. Designed to work with a Lab-
Innovations Corp. The sensor is mounted in a Jack, but can also be used with any voltage
stainless steel sheath and features a high- measuring device. Outputs 10 mV per
level linear output of 10 mV per degree F, degree C, and has a range of -40 to +100
typical accuracy of +/-0.25 degrees C ( +/-0.4 degrees C.
degrees F) at room temperature, and a range
of 0 to +300 degrees F (-17 to +150 degrees
C, with U3/UE9). Can be used with all lab-
jacks but can also be used with any other
voltage measuring device Price Each 1 5+
LAJ-003 $59.00 POA
Price Each 1 5+
LAJ-006 $95.00 POA
iUSBDaq Module
Digital Temperature/Humidity Probe The iUSBDAQ - U120816 is the lowest
cost USB data acquisition module. It is
EI-1050 Digital Temperature/Humidity USB 2/1.1 compliant.
Probe. The EI-1050 uses two digital It features eight 12-bit analog inputs, 16
lines on the LabJack U12 (IO0 and digital I/O lines, two programmable
IO1) to retrieve temperature and rela- pulse-width output channels, and one
tive humidity measurements. Featuring 16-bit counter channel. Analog sampling
the Sensirion SHT11 sensor it pro- rate is up to 32 ksamples/s for all 8
vides 14-bit temperature readings and channels, with single channel up to 13
12-bit humidity readings. An enable ksamples/s. All I/O is connected via
line is provided allowing up to 20 EI-1050 probes to be connected to a screw connectors.
single LabJack U12. Measurement range is -40 to 120 degrees C for Dimensions 90 x 85 x 30mm
temperature and 0 to 100% for humidity. Accuracy is +/-0.5 degrees C The package comes with all free usb cable, screw driver, device driver,
(@ 25 deg C) and +/-3.5%. DLL, LabVIEW driver, dot net wrapper class, rich examples
and free ready-to-run iDAQTest&Log testing and data logging software.

Price Each 1 5+ Price Each 1 4+

LAJ-005 $115.00 POA HYT-001 iUSBDaq Data Acquisition Module $155.00 $139.50

iUSBDAQ Data Acquisition and Logger Module

The iUSBDAQ - U1208LOG is the only multifunction three in one (3-in-1) USB data acquisition module that
provides PC control mode for fast speed data acquisition and transfer (up to 64KSamples/s) as well as standalone data
logging mode for direct data logging into USB flash drive without computer, the storage capacity is virtually unlimited,
it's up to your USB flash disk space. Another unique feature that iUSBDAQ - U1208LOG brings, is the build-in video
functions in programming APIs as well as in the FREE ready-to-run iDAQTest&Log software for easy integration and
synchronization of data and video. A dedicated video trigger output line is also provided in the hardware for external syn-
chronization with other devices..

Price Each 1 5+
HYT-010 iUSBDaq Data acquisition and Logger module $299.00 $269.10

NET-IOM Ethernet or Web I/O Board

NET-Link Ethernet Board

Netiom is a stand-alone network aware Netiom-Link works as a pair of devices

Input / Output module which can be communicating over an ethernet net-
controlled over most networks including work. Each Netiom-Link transmits a
the Internet. It can be accessed from packet of data to its opposite end con-
the Internet over a standard ADSL or taining information about its input
other always on connection making status. Upon receipt of this data the
remote monitoring and control a cost receiving device changes its outputs to
effective option. Features: be the same as the inputs on the trans-
4 Analog Inputs (0-5V 10bit) mitting unit.
16 Digital Inputs
16 Digital Outputs In this way all 16 inputs on one Netiom
10M Ethernet Interface –Link are reflected on the outputs of
HTTP server with 32K bytes of web space the second Netiom-Link. Hence a switch on one can operate a relay on
Web Space can be password protected the other. In a similar way serial data coming into one port will be trans-
Network Client. Connections triggered from events or timed mitted out of the serial port of the second Netiom-Link.
Generates e-mails in response to specified events

Price Each 1 5+ Price Each 1 5+

NET-001 $225.00 POA NET-005 $225.00 POA

Page 4 Ocean Controls Catalog 2008

 OCEAN CONTROLS - DATA ACQUISITION
NET-IOM UDP NET-IOM
Ethernet Board Relay Expansion Module

The Relay Expansion Module connects

Netiom UDP is a stand-alone network
directly to the NETIOM module. It has 8
aware Input / Output module which can
single pole change over relays each rated
be controlled over most networks. With
at 1 amp d.c. at 24 Volts d.c. /110 Volts a.c.
the DLL software provided you can
Connection to the module is via a 10 way
configure the card and write your own
ribbon connector (provided) which carries
VB and C programs to monitor and
the eight output lines plus power.
control devices over an Ethernet net-
work . It also allows your to send and
receive serial data through the serial
port on the card. Price Each 1 5+
Features include : NET-002 $49.00 POA
4 Analog Inputs (0-5V 10bit)
16 Digital Inputs
16 Digital Outputs NET-IOM
10M Ethernet Interface Led Display Board
Serial Port
Price Each 1 5+ The LED Display Module connects directly to our range of VIOM
NET-006 $225.00 POA and NETIOM products. It has 8 x 3mm red LEDs. Connection to
the module is via a 10 way ribbon connector (provided) which
carries the eight output lines
NET-IOM plus power.
Opto Isolation Module
As well as display functions the
Connects directly to the NETIOM Ethernet module is also very useful as
and Web I/O board. It has 8 optoisolators an installation / diagnostic aid.
for systems which require a high level of
isolation and noise immunity. Two versions
are available, one with a common optoisola-
Price Each 1 5+
tor supply rail the other with each optoisola-
NET-004 $49.00 POA
tor’s supply separate. Connection to the
module is via a 10 way ribbon connector
(provided) which carries the eight output
lines plus power
DAS005 - 12 Bit Data Acquisition Module
Price Each 1 5+ The DAS005 is a 12 bit data acquisition mod-
NET-003 $49.00 POA ule which features
- a 12 bit ADC with 8 single ended inputs
reading 0 to 4 Volts. The inputs can with-
stand up to +/-20V.
myPCLab Data Acquisition Module - ADC conversion time of less than 10 usecs.
Note using windows software reduces this
is a very compact Data Acquisition tool speed
which connects to a PC via a USB port. It - 4 Digital Inputs that are TTL and CMOS
has two universal analog inputs compatible
(Thermocouples type J, K, T, E, N, R, S - 4 Digital Outputs that are TTL and CMOS compatible that are capable
of sourcing and sinking 6mA.
and B, Pt100 RTD (3-wire), 4-20 mA,
Requires 9-12VDC power
0-50 mVdc or 0-10 Vdc) and one digital
input. From hobbyists to scientists, from
simple technical tasks to complex engineer- Price Each 1 5+
ing activities, myPCLab can be an invalu- KIT-005 DAS005 As Kit $89.00 $80.00
able tool for on-line monitoring and data KTA-005 DAS005 Assembled and Tested $125.00 $112.50
logging in school, laboratory research, machine data recording and in-
dustrial understanding. It comes with an intuitive and easy-to-use Win-
dows software which plots and records data, shows gauges, bargraphs
and digital readouts. The USB port is accessed as a virtual serial port D25 Terminal Board
which makes myPCLab compatible with SCADA softwares with Modbus
RTU driver or with any program with ASCII serial communication. Multi- The D25 male connecter to terminal card
ple units of myPCLab can be connected to the same computer. allows you to easily connect to screw termi-
nals
Price Each 1 5+ Can be used to add terminal connections to
NOV-010 myPCLab Data acquisition module $119.00 $107.10 the DAS005 and Labjack U12

Available in DIN Rail Mounting

Price Each 1 5+
DTC-001 D25 Terminal Card $45.00 $40.50
DTD-001 Card DIN Rail Mounted $65.00 $58.50

Page 5 Ocean Controls Catalog 2008

 OCEAN CONTROLS - DATA ACQUISITION
8 Bit Data Logger Module 4 Probe Temperature Logger

An improved version of the 8-bit Pocket Sampler fea- This kit is a 4 channel temperature
tured in Electronics Australia this compact 8-bit PC meter and logger. The temperature
driven data logger monitors voltage data, in degrees C or F, is output as a
changes over periods ranging from continuous data stream over an RS232
milliseconds to months. It uses the serial port. The kit uses 4 x DS18S20
ADC0804 8-bit A/D converter IC. digital thermometers (only 1 is supplied
A/D Converter: 8-bit Input Voltage - more are available on request). A
Ranges: 0 to +2 V and 0 to +20V data logger windows program is sup-
Resolution: 2V Range: 10mV plied on CD featuring trends, min-max
20V Range: 100mV Sampling Rate:
Once per hour to 100uS The DS18S20 has an operating tem-
(10KHz) Input Connection: 2.5mm perature range of -55°C to +125°C and
Jack socket Finished Dimensions: is accurate to ±0.5°C over the range of
55Wx65Lx15H(mm) -10°C to +85°C. The sensors can be mounted up to
Powered from PC’s Parallel Port 200metres away from the logger.
Window’s Datalogging Software included Windows Datalogging Software included

Price Each 1 5+ Price Each 1 5+

KIT-112 Kit $35.00 $31.50 KIT-145 Kit $34.50 $31.05
KTA-112 Assembled and Tested $55.00 $49.50 KTA-145 Assembled and Tested $47.00 $42.30

Digirail 2 Channel Universal Analog Input Module

Digirail 4 Channel Digital Input/Counter Module

This module can be used to monitor the status of digital inputs or count This module can be used to monitor 2 analog
pulses. inputs.
Features of the module include - Features of the module include -
Digital inputs: in voltage, 4 to 35V to activate. 2 Analogue inputs: programmable for thermocou-
Internally limited current to 5mA. ples (J, K, T, E, N, R, S, B), Pt100, mV, V, mA.
Maximum count frequency: 1000 Hz for signals Cold junction compensation for thermocouples
with square wave and working cycle of 50%. and compensation for Pt100 3-wire cables.
Input 1 can be configured for counting signals of Open loop detection for thermocouples, Pt100
up to 100 kHz. and mV.
Counting capacity (per input): 32 bits (0 to Sampling rate for 1 analogue input: 10Hz for mV,
4294967295) V and mA. 5Hz for t thermocouples and Pt100.
Power: 10 to 35Vdc, 50mA maximum current. Analogue input resolution: 17 bits.
2-wire RS485 communication with Modbus RTU User defined linearization for the analogue in-
protocol. Configurable address and baud rate puts.
(1,200 to 115,200bps). Power: 10 to 35Vdc, 50mA maximum current.
LED indicators for communication and status. 2-wire RS485 communication with Modbus RTU protocol. Configurable
address and baud rate (1,200 to 115,200bps).
LED indicators for communication and status.

Price Each 1 5+ Price Each 1 5+

SIG-101 $139.00 $125.10 SIG-100 $139.00 $125.10

Digirail 2 Relay Output Module Webserver WS10 Module

This module can be used to control 2 relay The WebServer WS10 is a device for data acquisition, logging and
outputs. transmission. It is capable of integrating instruments and sensors to the
Features of the module include - Internet, ethernet and wireless. The inputs for data acquisition can be
2 Relay outputs: 3A / 250Vac SPDT relay, re- either the 4 built-in analog and digital inputs or any inputs from the exter-
sistive load. nal equipments connected to the WS10 through the RS485 interface
Power: 10 to 35Vdc, 50mA maximum current. (Modbus protocol). Data transfer can be
2-wire RS485 communication with Modbus accomplished through the ethernet inter-
RTU protocol. Configurable address and baud face or modem (mobile or conventional)
rate (1,200 to 115,200bps). using ordinary Internet resources, such as
LED indicators for communication and status. the internet browser, e-mail and TCP
Windows based configuration software. connection.
Dimensions: 72 x 78 x 19mm. Internal memory for off-line data logging
Mounting: 35mm DIN rail. (16 bit CPU, with 512KB RAM)
Working temperature: 0 to 70°C. 2 Serial Interfaces (RS232, RS485 or
Modem)
Ethernet 10BaseT Interface. It suports
TCP/IP, PPP (client and server), HTTP,
FTP, SMTP, DHCP, Modbus TCP, Modbus RTU protocols
Mobile wireless networks (GSM GPRS or CDMA 1XRTT) email in case
of alarm
Price Each 1 5+ Price Each 1
SIG-102 $139.00 $125.10 NWS-001 $1499.00

Page 6 Ocean Controls Catalog 2008

 OCEAN CONTROLS - DATA ACQUISITION
16 Digital Output Modbus Module 16 Digital Input Modbus Module

The TRP-C24, an isolated output open TRP-C26 provides 16 optical isolated

collector RS-485 module, provides 16 digi- digital input channels that allow you to
tal outputs (100mA). All channels feature input the logic signal from 0 to 30V DC.
screw terminals for convenient connection All inputs are equipped with photo-
of field signals as well as LED’s to indicate couplers to protect the module against
channel working status. All outputs are high voltage spikes, as well as ground
equipped with photo-couplers to protect the potential differences. The module can be
module against high voltage spikes, as well remote controlled by PC in ASCII or Mod-
as ground potential differences. The mod- bus RTU protocol over a RS485 network.
ule can be remote controlled by PC in ASCII or Modbus RTU protocol Can be DIN Rail mounted with fitting
over a RS485 network. Can be DIN Rail mounted with fitting Specifications
Specifications - Power Input Voltage: DC +10V to +30V.
- Output channel: 16 digital output channels (open collector). - Input channel: 16 digital input channels with counter.
- Digital output isolation: 3750Vrms. - Input digital input counter: 0~65535.
- Communication interface: RS-485 differential 2 half/duplex wires. - Input optical isolation: 3750 Vrms.
- Communication speed form 1.2Kbps to 115.2Kbps auto-switching. - Input logical level 0 +1V (max).
- Data format: Data bit: 8, Parity Check: None, Stop Bit: 1. - Input logical level 1 +4.0V ~ +30V
- Distance: up to 4000ft ( 1200M ). - Leds to indicate status of digital inputs

Price Each 1 5+ Price Each 1 5+

TRY-024 16 Digital Output Modbus Module $149.00 $134.10 TRY-026 16 Digital Input Modbus Module $149.00 $134.10

4 Digital Input and 4 Relay Output Modbus Module 8 Analog Input Modbus Module

TRP-C28 provides with 4 optical isolate TRP-C68 ,is an 8-channel Analog input
digital input channels and 4 power relays module. It accepts either a voltage or a
output. All channel features screw terminals current signal and supports the sample
for convenient connection of field signals rate in “ Normal ” or “Fast” mode. All
as well as LED’s to indicate channel status. channels feature screw terminals for
Input channels are equipped with 3750Vms convenient connection, and LED’s to
DC isolation, and surge protection on RS- indicate channel status. All inputs are
485 data lines that protect the module and provided with isolation and surge protec-
device against high power voltage input tion to protect the module against high
and ground potential differences. The module can be remote controlled voltage spikes, as well as ground potential differences. TRP-C68 sup-
by PC in ASCII or Modbus RTU protocol over a RS485 network. Can be port both ASCII and Modbus protocol over a RS485 network.
DIN Rail mounted with fitting Specifications
Specifications - Resolution :16 bit
- Input logical level 0 +1V (max). - Sample rate: Normal mode: 10 Fast Mode: 60 sample / sec.
- Input logical level 1 +4.0V ~ +30V. - Zero drift: 0.03uV/C .
- Digital Input can be used as counter channel: 4 - Span drift:25 ppm/C .
- Counter frequency: 100Hz. - Accuracy: Normal 0.1 or better. Fast: 0.5 or better.
- Output channel: 4 channel power reply outputs. - Analog Input range:
- Relay type: 2 Form A (RL1,RL2) , 2 Form C (RL3,RL4). Voltage:±10V,±5V,±2.5V,±1.25V,±650mV. Current: +/-20mA.
- Contact ratting: 5A /30V DC , 5A /120V AC , 5A /250V AC. - CMRR:92 db min/50/60Hz
- Analog input over voltage protection:+/- 35V .
Price Each 1 5+
TRY-028 4 Digital In and 4 relay output Modbus Module $169.00 $152.10
Price Each 1 5+
TRY-068 8 Analog Input Modbus Module $225.00 $202.50

Page 7 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COMPUTER PARTS
4 PORT USB HUB 7 PORT USB HUB
Our most popular USB Hub allows you
High speed 7 port USB hub conforms to
to expand the number of USB connec-
USB 2.0 specification and will operate at
tions your computer has. * Super slim,
speeds up to 480Mbps. Power and 7 port
lightweight design
LED indication. Simple, flexible and highly
* Complies with USB 2.0 specs
scalable connectivity solution between you
* Supports high speed 480Mbps
PC and USB compliant device, including
* Lead included to connect to USB port
cameras, scanners, printers and ultra fast
on computer
storage devices.
* Plug & Play installation
* Measures only 100mm long x 62mm wide x 30mm high
* 1.8mt USB lead and 5 volt mains plugpack included.
Price Each 1 5+ * Supports Win 98SE, Me, 2k, XP and MAC OS 8.6-10X
UHB-001 4 Port USB Hub $22.50 $19.95 * Full compliance with USB Specs 2.0/1.1/1.0 and supports EHCI,
UHCI and OHCI specs.
Price Each 1 5+
UHB-002 7 Port USB Hub $54.50 $49.50

Box Of Connectors - BNC Pack Box Of Connectors - RS232 Gender Pack

Our plastic pack contains all the BNC Our plastic pack contains all the gender
connectors a technician needs for con- changers you need to sort out an RS232
necting to and analyzing problems connection.
2 - BNC T Adaptor 1 Male to 2 Female A D9 Female to Female
2 - BNC Female to Female Adaptor A D9 Male to Male
2 - BNC Terminator Plugs A D25 Female to Female
2 - BNC Male to Double Binding Posts/ A D25 Male to Male
Banana Sockets A D25 Male to D9Female changer
All in a long lasting plastic box for the A D25 Female to D9Male changer
technician to put in their tool box. A Null Modem
All in a long lasting plastic box for the
technician to put in their tool box
Price Each 1 5+
BOX-002 BNC Connector Pack $34.50 $31.00 Price Each 1 5+
BOX-001 RS232 Gender Pack $35.00 $31.00

Plug Packs Computer Leads

We stock a selection of non regulated We stock a selection of Cables and suitable for use with our data
Plugs Packs suitable for use with our acquisition equipment, relay controllers and microcontroller program-
data acquisition equipment, relay con- mers and other equipment
trollers and microcontroller program-
mers. Price Each 1 5+
Each of the plug packs have a selec- CAB-001 D25 RS232 Male-Female 1.8m Cable $11.00 $9.90
tion of plug connectors making it easy CAB-002 D9 RS232 Male-Female 1.8m Cable $7.50 $6.75
to connect to your equipment USB-001 A Male to A Male 1.8m Cable $9.00 $8.00
USB-002 A Male to B Male 1.8m Cable $9.00 $8.00
Price Each 1
PLP-001 6V, 7.5V, 9V, 12V 1Amp Plug Pack $16.00
PLP-003 12VDC 450mA Plug Pack $15.00
PLP-006 12VAC 500mA Plug Pack $17.25
PLP-005 18VDC 500mA Plug Pack $22.00

Page 8 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COMPUTER LEADS
RS232 Serial Leads Configurable RJ45 Adaptors

DB9 Male to DB9 Female 1.8m

Price Each 1 4+
CON-001 DB9 Female to RJ45 Female $3.60 $3.24
Price Each 1 4+ CON-002 DB9 Male to RJ45 Female $3.60 $3.24
CAB-002 DB9 male to DB9 Female 1.8m $7.59 $6.83

DB9 Male to DB9 Male 1.8m

Price Each 1 4+
Price Each 1 4+ CON-003 DB25 Female to RJ45 Female $5.60 $5.04
CAB-008 DB9 Male to DB9 Male 1.8m $7.59 $6.83 CON-004 DB25 Male to RJ45 Female $5.60 $5.04

DB9 Female to DB9 Female Null Modem 1.8m

USB Extension Lead
Price Each 1 4+
CAB-003 DB9 Female to DB9 Female Null 1.8m $9.05 $8.15
USB1.1 Extend the length of your USB device by
an additional 5-metres (16-feet) using this Active
DB25 Male to DB25 Female 1.8m USB Repeater Cable.

Price Each 1 4+
Price Each 1 4+
COV-005 USB1.1 USB Data Extension Lead $22.68 $20.40
CAB-001 DB25 Male to DB25 Female 1.8m $7.59 $6.83
RJ45 Modular Patch Leads
DB25 Male to DB25 Male 1.8m
RJ45 Modular Patch Leads

Price Each 1 4+
CAB-006 DB25 Male to DB25 Male 1.8m $7.59 $6.83

Price Each 1 4+
DB25 Male to DB9 Female Modem Cable 1.8m
CAB-030 Modular Patch Leads 0.5m $3.20 $2.85
CAB-033 Modular Patch Leads 1m $3.95 $3.50
CAB-036 Modular Patch Leads 2m $5.20 $4.60
Price Each 1 4+ CAB-039 Modular Patch Leads 3m $6.95 $6.30
CAB-007 DB25 Male to DB9 Female Modem 1.8m $8.47 $8.15 CAB-042 Modular Patch Leads 5m $8.95 $7.95
CAB-045 Modular Patch Leads 10m $12.95 $11.95
CAB-048 Crossover Cat 5e cables 2m $5.25 $4.70
Extra Long RS232 Serial Leads CAB-051 Crossover Cat 5e cables 5m $8.00 $7.20

Price Each 1 4+
CAB-010 DB9 Male to DB9 Female Modem 5m $11.75 $10.58
CAB-012 DB9 Male to DB9 Female Modem 10m $22.00 $19.80

USB Leads

USB2.0 Type A Male to Type A Male

Price Each 1 4+
USB-001 USB2.0 Type A Male To Type A Male $9.05 $8.15

USB2.0 Type A Male to Type A Male

Price Each 1 4+
USB-002 USB2.0 Type A Male To Type B Male $9.05 $8.15

USB2.0 Type A Male to 5 Pin Mini B

Use this to connect to a digital camera or camcorder
Length 1.8 metres

Price Each 1 4+
USB-003 USB2.0 Type A Male To 5 Pin Mini Male $9.05 $8.15

Page 9 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COMMUNICATIONS
ATEN USB-RS232 Converter ATEN USB to 2 Port and 4 Port RS232 Converter

The UC232A from ATEN is a USB to serial The UC232A from ATEN is a USB to 2 Port or 4
port converter. It provides PCs, notebook PCs Port serial RS232 converter. It provides PCs,
and handheld computing devices using USB notebook PCs and handheld computing devices
an external PnP RS232 port using USB an external PnP RS232 port

Features Features
Support the RS232 Serial interface. Easy way to add 4 RS-232 serial ports
Support full handshake mode Fully compliant with USB 1.1; USB 2.0 compatible
Full compliance with the USB Specification 1.1. Supports RS-232 serial interface
Up to 230Kbps data transfer rate. Supports automatic handshake mode
Works with cellular phones, PDAs, digital cameras, modems or ISDN Up to 115.2 Kbps data transfer rate for each serial port
terminal adapter. Supports remote wake up and power management
OS Compatibility: WIN98, WIN ME, WIN 2K, WIN 2003, WIN XP, Win- Dual data buffers for each upstream and downstream data transfer
dows Vista 32 & 64 Bit, LINUX and Mac OS 8.6/9/10.
Price Each 1
Package Content COV-014 USB to 2 Port Serial RS232 Converter $79.00
1x UC-232A COV-015 USB to 4 Port Serial RS232 Converter $109.00
1x Driver Disk
1x User Manual
Isolated USB-RS422/RS485 converter
Price Each 1 The USB-i485 module is a cost-effective
COV-005 USB to Serial Converter $29.00 way to convert RS485 or RS422 indus-
trial buses to a USB interface. When
ATEN IC-150 Short Haul Modem connected to a PC USB port the USB-
i485 module is automatically detected
The IC-150 Short Haul Modem allows you to and is installed as a native COM port.
connect the RS-232 ports of remote devices 1500 Vdc isolation between the USB port
for fast and easy file transfers and data shar- and RS485/RS422 protects the PC from
ing. Save on the cost of extra modems by spikes or possible misconnections in the
installing a pair of these economical units and communication bus.
connecting them up with twisted pair cable.
The USB-i485 converter can be configured for four-wire (Full Duplex)
The nonpowered Line Driver facilitates effi- RS422 and RS485 or two-wire (Half Duplex) networks. When operating
cient transmission and reception of serial in two-wire RS485 the data transfer control is automatically done by the
data without requiring an external power converter.
source. - Supports Windows 98/ME/2000/CE/XP/Vista, MAC & Linux 2.4.20 or
superior.
The unit drives your data at various speeds up to 19,200 bps over dis- - Transmission rate: from 300 bps to 1Mbps.
tances up to 800m using 24-gauge wire (transmitting at 110 bps over
distances up to 10km). Price Each 1 5+
It provides 1,500VAC lighting surge protection and excellent noise rejec- COV-001 Isolated USB to RS422/RS485 Converter $129.00 $116.00
tion through the use of differential circuitry. The unit is switch-selectable
for DCE/DTE.
The Line Driver provides asynchronous transmission and operates full Non-Isolated RS232 to RS485/RS422 Converter
duplex over four wires.
The IC-485S converter can operate in:
Features RS422 mode: Point to point on 2 twisted pairs.
No external power supply required RS485 mode: Multidrop on one twisted pair
DCE/DTE selection Simplex: when any device transmits, the others
Long distance transfer via economical cable receive only

Features
Price Each 1
• In RS485 mode, data transmission direc-
COV-020 ATEN IC-150 Short Haul Modem $69.00
tion must be controlled by the RTS Signal
(i.e. it is not automatic).
For Automatic direction control see the units from Trycom.
USB-Parallel Port Converter • DCE/DTE Selectable
• Point to Point, Multidrop, and Simplex/Duplex Link Selectable
This converter allows you to connect stan- • Four Wire Full Duplex / Two Wire Half Duplex, D25 Female connector
dard (IEEE-1284) parallel printers. It in- • Supports baud rates up to 115.2kbps.
cludes
- True PnP & Bi-Directional printing Data transfer can take place at up to 1200 metres over four or two wire
- An 'A' Type USB connector to 36 Pin cable for full or half duplex, respectively.
Centronics In RS485 (2-wire) mode up to 32 receivers can be set up in a multidrop
- Length: 1.7m cable installation, making for a cost effective network configuration.
- USB Port powered
- Drivers included The IC-485S can obtain power from the RS232 port.
For better line driving capability a mains Adaptor is included
Price Each 1 Price Each 1
COV-004 USB to Parallel Port Converter $45.40 COV-002 Non-Isolated RS232 to RS422/RS485 Converter $69.00

Page 10 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COMMUNICATIONS
RS232 to RS422/RS485 Isolated Converter Dual RS232 to RS422/RS485 Isolated Converter

The TRP-C06 allows RS-232 line signal to The TRP-C06H allows 2 RS232 line
be bi-directionally converted to RS-422 or signal to be bi-directionally converted to
RS-485 standard and transmit data up to RS-422 or RS-485 standard and transmit
1.2KM . Featuring automatic data format data up to 1.2KM . Featuring automatic
and baud rate detect function user just data format and baud rate detect func-
need to plug in the unit and go without tion users just need to plug the unit and
extra configuration efforts. TRP-C06 is go without extra configuration efforts.
equipped with 3000V DC of isolation and TRP-C06H is equipped with 3000V DC
internal surge protection on data lines to protect the host computer of isolation and internal surge protection
and converter against high voltage spikes, as well as ground potential to protect the host computer and converter against high voltage spikes,
differences. DIN Rail mount option available. as well as ground potential differences. DIN Rail Mount Option
Features include Features Include
- 10-30VDC power supply. - 10-30VDC power supply.
- Automatic data format configuration. - Automatic data format configuration.
- Auto direction flow control on RS-485. - Auto direction flow control on RS-485.
- Auto baud rate switching from 300bps to 115.2Kbps. - Auto baud rate switching from 300bps to 115.2Kbps.
- 3000V DC isolated protection. - 3000V DC isolated protection.
- Surge protection on RS-422/485 data lines. - Surge protection on RS-422/485 data lines.
- Power/TX/RX mode LED indicator. - Power/TX/RX mode LED indicator.
- Support screw terminal and external DC adaptor. - Support screw terminal and external DC adaptor.
Price Each 1 5+ Price Each 1 5+
TRY-001 RS232 to RS422/RS485 Isolated Converter $129.00 $116.10 TRY-002 Dual Isolated RS232 to RS422/RS485 Converter $199.00 $179.10

RS485/RS422 Repeater USB to RS232/RS485/RS422 Converter

TRP-C07 is designed to extend the RS- The TRP-C08 allows you to connect your
422 and RS-485 signals to another 4000ft serial devices to systems by using a USB
( 1200m ) distance and increase the maxi- interface. With auto configuration in data
mum number of connected nodes up to 32 format, baud rate and RS485 data flow
sets. Aside from extension function TRP- direction control. TRP-C08 is able to auto-
C07 provides with auto configuration fea- matically configure RS232, RS422 or
tures in data format detecting, baud rate RS485 signals to baud rate without external
setting and RS-485 data direction flow switch setting. TRP-C08 is equipped with
control. TRP-C07 is equipped with photo- 3000V DC of isolation and internal surge-
couplers and internal surge protection to protect the module and all data protection on each data lines to protect the host computer and converter
lines against high voltage spikes, as well as ground potential differ- against high voltage spikes, as well as ground potential difference. TRP-
ences. DIN Rail mount option available. C08 also features a high-speed 256 Kb/s transmission rate, and supports
- 10-30VDC power supply. various O.S. DIN Rail mount option available.
- Automatic data format configuration. Features include
- Auto direction flow control on RS-485. - Full compliance with the USB V1.0 and 2.0 specification.
- Auto baud rate switching from 300bps to 115.2Kbps. - System gets 1 COM port when the converter is connected.
- RS485 bi-directionally communication. - Auto data format detecting.
- 3000 VDC isolated protection. - Auto direction flow control on RS485.
- Surge protection on RS-422/485 data lines. - Auto baud rate switching from 300bps to 115.2 Kbps.
- Power/TX/RX mode LED indicator. - 256 byte buffer for upstream and downstream data flow.
- Direct power from USB port , no external power necessary.
- 3000V DC isolated protection.
Price Each 1 5+
- Surge protection on RS422/485 data lines.
TRY-003 RS422/RS485 Isolated Repeater $149.00 $134.10
- Power/TX/RX mode LED indicator.
- Driver support: Windows 98/ME/2000/XP/CE3.0, Linux and Mac OS.

USB2.0 to 1 RS232 and 1 RS485/RS422 Converter Price Each 1 5+

TRY-004 USB-RS232/RS422/RS485 Isolated Converter $129..00 $116.10
The TRP-C08S is one standard USB 2.0 to Serials Bridge that has one DB-9 RS232 male connectors and 4 PIN
screw terminal for RS422/485. The DB-9 pin serial port is configured as a DTE (data terminal equipment) device
which is same as all PC COM ports. The RS422/485 with auto configuration in data format, baud rate and RS485
data flow direction control. RS422/485 equips with 3000VDC of isolation and internal surge-protection on each data
line, it gives the host computer and module itself entirely protection from destructive voltage spikes and danger of
unregulated voltages input. TRP-C08S also features a high-speed 256 Kb/s transmission rate, and supports various
O.S. The industry DIN rail and panel mounting design enable user a fast and professional installation.
- Input: 2.0 protocol.
- Output: RS232 signal: Standard 9 pin DTE full-duplex.
- RS422 signal: Differential 4 full-duplex wires, RS485 signal: Differential 2 half-duplex wires (D+, D-).
- Optical Isolation:RS422/485 3KV.
- Data Format: Asynchronous data with any combination of bits, parity, stop
- Parity type: None, odd, even mark, space.
- Data bit: 5, 6, 7, 8
- Cable: USB 2.0 type A to type B cable. Price Each 1 5+
-Communication speed: from 300bps to 256Kbps. TRY-014 USB-1 RS232 and 1 RS422/RS485 Isolated Converter $199..00 $179.10

Page 11 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COMMUNICATIONS
USB to 2 RS232 and 2 RS485/RS422 ports Converter

The TRP-C08H allows you to simultaneously connect 2 RS232 and 2 RS422/485 serial devices to system by using a
USB interface. The RS232 interface support all common PC DTE connection type. For RS422/485 data lines TRP-
C08H provides auto-detecting function in data format, baud rate and data direction flow control, it may automatically
configure RS422/485 signals and baud rate without external switch setting. TRP-C08H is equipped with 3000V DC of
isolation and internal surge protection to protect the host computer and converter against high voltage spikes, as well
as ground potential differences. TRP-C08H features a high-speed 256KB transmission rate, and supports various
O.S. DIN Rail mount option available.
- 10-30VDC power supply.
- Full compliance with the USB V1.0, 1.1 and 2.0 specification.
- Expand to 2 standard RS232 ports and 2 RS422/485 ports.
- System gets 4 COM port when the TRP-C08H converter is connected..
- 256 bytes buffer for upstream and downstream data flow.
- Auto direction flow control on RS485.
- Automatically switch signal RS422 and RS485.
- Support 3000V DC isolation and surge protection on RS422/485 data lines. Price Each 1 5+
- Power/TXA/RXA/TXB/RXB mode LED indicator. TRY-005 USB-2 RS232 and 2 RS422/RS485 Converter $330..00 $297.00

Ethernet to RS232/RS422/RS485 Isolated Converter Ethernet to 1 RS232 and 1RS232/RS422/RS485

Converter
TRP-C31, a fast single ports serial to TRP-C32, a fast 2-port serial to Ethernet
Ethernet device, is designed to instantly device, is designed to instantly convert
convert data from RS232/422/485 inter- data from RS232/422/485 interfaces to a
faces to a 10/100Mbps Ethernet network 10/100Mbps Ethernet network running at
running at the TCP/IP protocol. By using the TCP/IP protocol. By using existing
existing network infrastructure the device network infrastructure the device allow
allow you to link a distant serial peripherals. you to link 2 distant serial peripherals.
You can reach TRP-C31 from Windows, You can reach TRP-C32 from Windows,
Linux and UNIX without the need to modify Linux and UNIX without the need to
existing software. The TR-C31 operates in “Direct IP Mode”, “Virtual modify existing software. The TR-C32 operates in “Direct IP Mode”,
COM Mode”, and “Paired Mode”. It has one synchronous DB-9 serial “Virtual COM Mode”, and “Paired Mode”. It has 2 synchronous DB-9
ports equipped 10/100 Mbps Ethernet RJ-45 connection. The Ethernet serial ports equipped 10/100 Mbps Ethernet RJ-45 connection. The
port may auto-select 10Base-T or 100Base-TX. TRP-C31 also offers a Ethernet port may auto-select 10Base-T or 100Base-TX. TRP-C32 also
Heart Beat feature to ensure a reliable communicating connection. TRP- offers a Heart Beat feature to ensure a reliable communicating connec-
C31 will work at Loop back Mode, all data is sent back immediately. This tion. TRP-C32 will work at Loop back Mode, all data is sent back imme-
feature makes the connection testing easy. DIN Rail mount option avail- diately. This feature makes the connection testing easy. And the industry
able. standard DIN rail design enables fast and professional installation. DIN
Features include Rail Mount Option
- 10-30VDC power supply. Features Include
- RS232/422/485 all-in-one serial interface. - 10-30VDC power supply.
- Auto-detecting 10/100Mbps Ethernet interface. - 2 serial ports interface: 1 RS232, 1 RS232/422/485.
- In Server mode supports individual client sessions for security. - Auto-detecting 10/100Mbps Ethernet interface.
- Virtual COM drivers for Windows NT/98/ME/2000/XP. - In Server mode supports individual client sessions for security.
- Auto direction flow control on RS485. - Virtual COM drivers for Windows NT/98/ME/2000/XP.
- Provide with +/- 15KV ESD protection on RS232/422/485 signals. - Auto direction flow control on RS485.
- Supported baud rate up to 230.4 Kbps. - Provide with +/- 15KV ESD protection on RS232/422/485 signals.
- Power/Link/COM Flow LED indicators. - Supported baud rate up to 230.4 Kbps.
- Support intranet and internet system setting function. - Power/Link/COMA/COMB Flow LED indicators.
- Support screw terminal and standard external DC power adaptor. - Support intranet and internet system setting function.

Price Each 1 5+ Price Each 1 5+

TRY-006 Ethernet to RS232/RS422/RS485 Converter $207.50 $186.75 TRY-008 Ethernet to 1 RS-232 and 1 RS-232/422/485 $299.00 $269.10

RS485/RS422 Repeater
RS422 and RS485 communication levels can physically support 32 nodes up-to a maximum distance of 1200 mtrs. The
CNV-03-B is a RS422 / RS485 repeater and is used where more than 32 nodes are to be connected in the RS485 net-
work or the distance between two nodes is more than 1200m. It increases number of nodes connected in RS485 net-
work. One CNV-03-B can increase maximum 32 nodes in the network. Multiple CNV-03-B units can be used to support
maximum 255 nodes in one network.

The repeater has 2 communication ports. Both the communication ports are screw type easy to use connectors. Com-
munication ports as well as power port are isolated. It supports both 2 wire / 4 wire RS485 and RS422 configuration. It
has switch settings to select 2 wire / 4 wire communication on each port.
Features
- DIN rail or panel mounted compact Converter
- Suitable for baud rates up to 115kbps
- Power, Tx and Rx LEDs Price Each 1
COV-103 RS422/RS485 Repeater $125..00
- operates on 24 VDC external supply

Page 12 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COMMUNICATIONS
Ethernet to 4 ports RS232/RS422/RS485 Converter Modbus TCP/IP to ASCII/RTU Gateway

TRP-C34, a fast 4-port serial to

The TRP-C 31M , MODBUS gateway al-
Ethernet device, is designed to in-
lows the legacy MODBUS RTU/ASCII de-
stantly convert data from RS-
vices to operate on a MODBUS TCP net-
232/422/485 interfaces to a
work. It allows either MODBUS serial mas-
10/100Mbps Ethernet network run-
ter or slave to communicate with MODBUS
ning at the TCP/IP protocol. By using
TCP’s slave or master.
existing network infrastructure the
When TRP-C 31M function as “MODBUS
device allow you to link 4 distant
TCP masters to RTU/ASCII slaves”: It al-
serial peripherals. You can reach
lows multiple MODBUS TCP masters to
TRP-C34 from Windows, Linux and UNIX without the need to modify
communicate with a MODBUS serial network. the queries from different
existing software. The TR-C34 operates in “Direct IP Mode”, “Virtual
masters are pipelined and processed one by one. When TRP-C 31M func-
COM Mode”, and “Paired Mode”. It has 4 synchronous DB-9 serial ports
tion as MODBUS RTU/ASCII master to MODBUS TCP slaves: it can con-
equipped 10/100 Mbps Ethernet RJ-45 connection. The Ethernet port
nect up to 8 MODBUS TCP slaves.
may auto-select 10Base-T or 100Base-TX. TRP-C34 also offers a Heart
User can specify a UID range for each MODBUS TCP slave. TRP-C 31M
Beat feature to ensure a reliable communicating connection. TRP-C34
provides inactive timeout that allows user to specify a time period to dis-
will work at Loop back Mode, all data is sent back immediately. This
connect TCP/IP connection to prevent one connection slot was occupied if
feature makes the connection testing easy. DIN Rail mount option avail-
there is no activity in the network., or prevent any another connection
able.
again. A friendly management software provides user an easy way of
Features include
configuration over Ethernet. TRP-C 31M can work at Loop back Mode, all
- 10-30VDC power supply.
data is sent back immediately. This feature makes the connection testing
- 4 X RS-232/422/485 all-in-one serial interface.
easy. DIN Rail mount option available.
- Auto-detecting 10/100Mbps Ethernet interface.
Features include
- In Server mode supports individual client sessions for security.
- 10-30VDC power supply.
- Virtual COM drivers for Windows98/Me/NT/2000/XP.
- Supports 10/100 Mbps Ethernet.
- Auto direction flow control on RS-485.
- Supports RS232, RS422, and RS485 serial interface.
- Provide with +/- 15KV ESD protection on RS-232/422/485 signals.
- Supports LAN and WAN communications.
- Supported baud rate up to 230.4 Kbps.
- Management access password protected.
- Power/Link/COMA/COMB/COMC/COMD flow mode LED indicators..
- High speed up to 230.4Kbps
- Support intranet and internet system setting function.
- Supports 8 MODBUS TCP master to MODBUS RTU/ASCII slave (up to
- Support screw terminal and standard external DC power adaptor
31) .
- Supports MODBUS RTU/ASCII master to MODBUS/TCP slave
devices (up to 8).

Price Each 1 5+ Price Each 1 5+

TRY-009 Ethernet to 4 ports RS-232/422/485 Converter $489.00 $440.10 TRY-007 Modbus TCP To RTU/ASCII Gateway $475.00 $427.50

Ethernet to RS232/RS422/RS485 Isolated Converter Ethernet to Fiber Media Converter

TRP-C36, a high speed, single-port serial TRP-C41 is a device for Ethernet extension over
device, is designed to instantly convert data fiber, it supports point-to-point and networked
from RS-232/422/485 interfaces to an systems. The high fiber bandwidth connections
Ethernet network running at the TCP/IP, solve problems with electrical noise and different
UDP protocol. By using a standard COM ground potentials over long transmission lines.
port and existing network infrastructure the TRP-C41 supports 10/100Base-TX transmis-
device allow you to link together a distant sions up to 100 meters and 100Base-FX trans-
RS-232/422/485 serial device. You can missions up to 20KM . It is the perfect solution
reach TRP-C36 from Windows and Linux for wide distance connections with high immunity to electrical noise.
without the need to modify existing software. TRP-C36 supports
10/100Mbps auto-detecting, and auto RS-485 data direction flow control, Features include
it also provides with 3000V DC isolation and internal surge protection to - Cable: Fiber cable (9/125um).
protect the converter against high input voltage spikes and ground po- - One 10/100Base-TX auto-negotiation Ethernet RJ-45 port.
tential differences, and ensure a save data transmission on network. - One 100Mbps fiber port with Single-mode SC connector.
DIN Rail mount option available. - Built in 128Kb RAM for data buffer.
- Wavelength: 1310 nM.
Features include - Fiber Power:-15 ~ -8 dBm.
- 10-30VDC power supply. - LED indicator: Power and power and TX and fiber link/activity, full/half,
- Fully compatible with Ethernet TCP/IP protocol. 10/100MB.
- Support 3000V DC isolation protection. - Distance : 20KM can be up to 60KM (option).
- Auto direction flow control on RS-485. - Speed : Auto 10/100MB.
- Surge protection on RS-422/485 data lines. - Power Consumption: 12V/160mA.
- Support baud rate up to 230Kbps. - Power requirement: USB port power or DC input or screw terminal
- Power/Link/TX /RX mode LED indicator. from +10 to 30V.
- Support intranet and internet system setting function. - Operating temperature: 0 to 55degC.
- Support screw terminal and standard external DC power adaptor.
- Operating System: Windows98/Me/2000/NT/XP.

Price Each 1 5+ Price Each 1 5+

TRY-010 Ethernet to RS-232/422/485 Isolated Converter $239.00 $215.10 TRY-041 Ethernet to Fibre Converter $249.00 $224.10

Page 13 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COMMUNICATIONS
Fiber to RS232/RS422/RS485 Isolated Fiber to RS232/RS422/RS485 Isolated
Converter ST Multi Mode
The TRP-C39S fiber converter allows The TRP-C39 fiber converter allows RS-
RS-232/422/485 signals to be bi- 232/422/485 signals to be bi-directionally
directionally converted to fiber optic and converted to fiber optic and extend the dis-
extended the line signal distance up to tance up to 2KM over multi-mode. By using
40KM over single mode. By using fiber fiber optic transmission technology TRP-C39
optic transmission technology TRP- secures a stable and error free data transmis-
C39S secures a stable and error free sion over the industrial environments present
data transmission over the industrial electrical noise and ground differential chal-
environments. The high bandwidth fiber connections solve problems with lenges, especially over long distances. TRP-C39 support data format,
electrical noise and different ground potentials over long transmission. baud rate and data direction auto configuration, it also provides with
TRP-C39S support auto configuration in data format, baud rate and RS- 3000V DC isolation and internal surge protection. The industry DIN rail
485 data direction flow control, it also provides with 3000V DC isolation and panel mounting design enable user a fast and professional installa-
and internal surge protection. DIN Rail mount option available. tion. DIN Rail Mount Option

Features include Features Include

- 10-30VDC power supply. - 10-30VDC power supply.
- SC single mode fiber port. - Wide range power input voltage.
- Auto direction flow control on RS-485. - ST Multi-mode fiber port.
- Auto RS-232/422/485 signals switching. - Auto direction flow control on RS-485.
- Auto data format detecting. - Automatically switch signal RS-232, RS-422 and RS-485.
- Auto baud rate switching from 300bps to 115.2Kbps. - Support 3000V DC isolation protection.
- Support 3000V DC isolation protection. - All RS-422/485 signals provide surge and over current protection.
- Support surge protection on RS-422/485 data lines. - Power/TX/RX mode LED indicator.
- Power/TX/RX mode LED indicator. - Fiber transmission distance up to 2KM .
- Fiber transmission distance up to 40KM . - Auto baud rate switching from 300bps to 115.2Kbps.

Price Each 1 5+
Price Each 1 5+ TRY-012 Fiber to RS-232/422/485 ST Multi-mode $229.00 $206.10
TRY-013 Fiber to RS-232/422/485 SC Single-mode $429.00 $386.10
DIN RAIL OPTION FOR
Bluetooth to RS232/RS422/RS485 Converter TRYCOM COMMUNICATION MODULES

Based on Bluetooth technology TRP- Price Each 1 5+

C51 allows you to wirelessly connect TRY-900 DIN Rail Mount $15.00 $13.50
your RS232/422/485 devices to sys-
tems within the range up to 100M. The
TRP-C51 features wide range power Modem Long Range 433MHz: UM96 - Includes Antenna
input, auto RS232/422/485 signal and Cable
switching and internal surge protection
on RS422/485 lines. It also supports all 433MHz Long Range Radio from HAC.
common data format and baud rate These small modems use a seamless serial
which can be configured by the bundled TRP-BT interface - whatever enters the TX pin at
utility from Windows system. TRP-C51 can operate 9600bps shows up on the other unit's RX
in “Direct link mode” and “Paired mode” When in pin. All buffering and error detection is han-
paired mode, the user just need to power two de- dled internally. And the best part - with
vices, and they will automatically connect without 10mW output, it reaches over 500m!
software and hardware changes on your systems
that will replace your serial wire with a completed This unit can be attached to TTL level serial
transparent wireless connection. It can be used for (for microcontrollers) or directly to RS232 for
wide range of applications for wireless operation incredibly simple serial cable replacement!
and monitoring process. DIN Rail mount option available. Specifications:
Features include
- 10-30VDC power supply. * Operating Voltage: 3.3V-5.5V
- Bluetooth V1.2 Class 1 compliance. (2.5mW/4dBm) * 9600bps over 500m
- Transmission range up to 100M . * Modulation type: GFSK
- Bi-directionally RS485 signals communication. * 8 Channels jumper selectable
- Support all common baud rate from 1.2K to 256Kbps. * Low power : 30mA RX, 40mA TX, 20uA Sleep
- Comfortable TRP-BT configuration software (Windows version). * Small footprint size: 26x47mm
- RS232/422 and RS485 signal auto switching.
- Master/Slave connection mode selectable. Supported Antennae: Kit comes with 1/4 wave 50Ohm antenna and
- LED indicators for Power/Link/TX/RX. communications cable!
- Surge protection on RS422/RS485
- Power supply: Screw terminal, or external DC adapter
- Wide input range power supply. Price Each 1 5+
- DIN rail and panel mount support. WIR-001 Modem Long Range 433MHz: UM96 $69.00 $62.10

Price Each 1 5+
TRY-015 Bluetooth to RS-232/422/485Converter $429.00 $386.10
TRY-901 USB-Bluetooth Dongle $49.00 $44.10

Page 14 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COMMUNICATIONS
Modem Long Range 433MHz: UM12 - Includes Antenna
and Cable Bluetooth Modem
433MHz Long Range Radio from HAC. These
The BlueSMiRF is the latest Bluetooth wireless serial cable replace-
small modems use a seamless serial interface
ment. These modems work as a serial (RX/TX) pipe. Any serial stream
- whatever serial character enters the TX pin at
from 9600 to 115200bps can be passed
1200bps shows up on the other unit's RX pin.
seamlessly from your computer to your
All buffering and error detection is handled
target. We've even tested these units suc-
internally. And the best part - with 10mW out-
cessfully over open air at 350ft (106m)!
put, it reaches over 1000m!
The remote unit can be powered from
This unit can be attached to TTL level serial
3.3V up to 6V for easy battery attachment.
(for microcontrollers) or directly to RS232 for
All signal pins on the remote unit are 3V-
incredibly simple serial cable replacement!
6V tolerant. No level shifting is required.
Specifications:
The BlueSMiRF includes hardware flow
* Operating Voltage: 3.3V-5.5V
control (CTS and RTS) and uses a com-
* 1200bps over 1000m
pact ceramic antenna.
* Modulation type: GFSK
* 8 Channels jumper selectable (4 can be used in Australia 433MHz
Specifications:
and above)
* FCC Approved Class 1 Bluetooth Radio Modem
* Low power : 30mA RX, 40mA TX, 20uA Sleep
* Extremely small radio - 0.15x0.6x1.9"
* Small footprint size: 26x47mm
* Very robust link both in integrity and transmission
Documents: HAC-UM96 Datasheet (Serves both UM96 and UM12)
distance (100m) - no more buffer overruns!
Supported Antennae: Kit comes with 1/4 wave 50Ohm antenna and
* Low power consumption : 25mA avg
communications cable!
* Hardy frequency hopping scheme - operates in harsh RF environ-
ments like WiFi, 802.11g, and Zigbee
Price Each 1 5+
* Encrypted connection
WIR-002 Modem Long Range 433MHz: UM12 $69.00 $62.10
* Frequency: 2.4~2.524 GHz
* Operating Voltage: 3.3V-6V
Transceiver - 2.4GHz with Duck * Serial communications: 2400-115200bps
Antenna * Operating Temperature: -40 ~ +70C
* Built-in antenna
The MiRF v2 is the latest in RF mod-
ules. This module uses the newest Use a Bluetooth USB Dongle to communicate between a PC and the
2.4GHz transceiver from Nordic Semi- modem
conductor, the nRF24L01. This trans-
ceiver IC operates in the 2.4GHz band Price Each 1 5+
and has many new features! Take all the WIR-010 Bluetooth Modem $99.00 $89.10
coolness of the nRF2401A and add some extra pipelines, buffers, and TRY-901 USB-Bluetooth Dongle $49.00 $44.10
an auto-retransmit feature - very nice! This also board features a re-
verse polarized SMA connector for maximum RF range. Please remem-
ber, you will need a mating RP-SMA 2.4GHz antenna (listed below). Serial UHF Transmitter and Receiver

Comes with 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - This transmitter and receiver
SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm pair have a usable range up to
impedance. 4" long. 30m
Features: Supply Voltage 5VDC
* On-board 3.3V LDO Regulator (3.3 to 7V supply allowed) Transmission Data rate 8KB/sec
* 80m Range at 1000kbps Receiver Data rate 4.8KB/Sec
* 2Mbit Data Rate Modulate Mode ASK
* Auto Acknowledge Frequency range—433.92MHz
* Auto Re-Trasmit
* Multiceiver - 6 Data Pipes Price Each 1 5+
* 32 Byte seperate TX and RX FIFOs WIR-020 Serial UHF Transmitter $10.00 $9.00
WIR-021 Serial UHF Receiver $10.00 $9.00
Price Each 1 5+
WIR-006 Transceiver - 2.4GHz with Duck Antenna $34.95 $31.45
Serial UHF Transmitter and Receiver Pair

RS232 to TTL Converter

This transmitter and receiver pair is good for data
rates up to 4800bps and distance up to 160metres
Power the board at 5V and the unit will convert The receiver is operated at 5V and the transmitter
RS232 to 5V TTL. Power the board at 2.8V and operates from 2-12V. The higher the Voltage, the
the Shifter board will convert RS232 to 2.8V greater the range
CMOS TTL. Includes two indicator LEDs for TX This is an ASK transmitter module with an output
and RX. Runs from 300bps up to 115200bps. of up to 8mW depending on power supply voltage.
Unit comes fully assembled and tested as shown. You can either solder The transmitter is based on SAW resonator and accepts digital inputs, can
a 4-pin header or individual wires. operate from 2 to 12 Volts-DC, and makes building RF enabled products
very easy.
Dimensions: 1.25x1.15"
Price Each 1 5+ Price Each 1 5+
WIR-020 Serial UHF Transmitter $15.00 $13.50 WIR-030 Serial UHF Transmitter Receiver pair $20.00 less 10%

Page 15 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COMMUNICATIONS
XBee 2mW Series 2.5 Wire Antenna XBee Pro 60mW Wire Antenna

New 2.4GHz XBee XB24-BWIT-004 module from The very popular 2.4GHz XBee XBP24-AWI-001
Digi (formally Maxstream). Series 2.5 improves on module from Digi (formally Maxstream). The Pro
the power output and data protocol. These modules series have the same pinout and command set of
take the 802.15.4 stack (the basis for Zigbee) and the basic series with an increase output power of
wrap it into a simple to use serial command set. 60mW! These modules take the 802.15.4 stack (the
They allow a very reliable and simple communica- basis for Zigbee) and wrap it into a simple to use
tion between microcontrollers, computers, systems, really anything with serial command set. They allow a very reliable and simple communica-
a serial port! Point to point and multi-point networks are supported. tion between microcontrollers, computers, systems, really anything with
a serial port! Point to point and multi-point networks are supported.
Series 1 and Series 2.5 XBee modules have the same pin-out. However,
Series 1 modules cannot communicate with new Series 2.5 modules. Features:
Features: * 3.3V @ 215mA * 250kbps Max data rate
* 3.3V @ 40mA. * 250kbps Max data rate * 60mW output (+18dBm) * 1 mile (1500m) range
* 2mW output (+3dBm) * 400ft (120m) range * Built-in antenna * Fully FCC certified
* Built-in antenna * Fully FCC certified * 6 10-bit ADC input pins * 8 digital IO pins
* 6 10-bit ADC input pins * 8 digital IO pins * 128-bit encryption * Local or over-air configuration
* 128-bit encryption * Local or over-air configuration
Price Each 1 5+
Price Each 1 5+ KIT-173 RF Serial Transmit Kit $48.00 $43.00
KIT-173 RF Serial Transmit Kit $48.00 $43.00

XBee Breakout Board

This is a simple breakout board for the popular XBee

product from Maxstream. This board breaks out all 20
pins of the XBee to a 0.1" standard spacing dual row
header. The spacing between 0.1" headers is 0.5"
making it breadboard DIP friendly. We highly rec-
ommend using the female sockets to avoid having
to solder the XBee permanently to the breakout
board. This is the PCB only. Please order the ac-
companying 2mm sockets (you'll need 2!) and 0.1"
headers below.

Price Each 1 5+
KIT-173 RF Serial Transmit Kit $48.00 $43.00

These are a series of four kits that implement an RF (Radio Frequency) data link. Each receiver has a 4-bit address set by an onboard 4-way DIP
switch. This allows a total of 16 receivers to be used in a 'network' with each one being uniquely addressable.
The RF modules operate at 433.94MHz and use 'amplitude modulation' to transmit data. This transmission method, also know as 'On-Off Keying
(OOK)', transmits data by simply switching the carrier signal on and off. The RF transmitter and receiver modules used in these kits are available as
separate items, A18-Tx and A18-Rx. They are produced by 'WenShing' of Taiwan - datasheets can be downloaded from their website at
"www.wenshing.com.tw".
Each kit contains an Atmel 89C2051 microcontroller that handles all the I/O as well as encoding and decoding the data.

KIT-173 RF Serial Transmit Card KIT-174 RF Serial Receive and Serial Output Card
KIT-173 can receive up to 64 characters via A KIT-174 will receive any messages sent by
its serial port and transmit the message. The KIT-173 and output the data via its serial port.
serial port baudrate is selectable from 300, The data format is fixed at 8N1 (8 data bits, no
1200, 2400 and 9600. The data format is parity, 1 stop bit). The data rate is selectable
fixed at 8N1 (8 data bits, no parity, 1 stop bit). between 2400 and 9600 baud. An optional
Two input modes are available as well as carriage return/line feed can be appended to
input echo if required. An optional destination the output.
address can be automatically inserted into the
message before transmitting.

Use this card and the KIT-174 below to remotely link your PC with our
KIT-108 Serial I/O Controllers
Price Each 1 5+
Price Each 1 5+
KIT-174 RF Serial Receive Kit $55.00 $49.50
KIT-173 RF Serial Transmit Kit $48.00 $43.00
KTA-174 RF Serial Receive Kit Assembled $79.00 $71.00
KTA-173 RF Serial Transmit Kit Assembled $69.00 $63.00

Page 16 Ocean Controls Catalog 2008

 OCEAN CONTROLS - DATA LOGGERS
TagTemp Temperature Logger TagTemp Temperature Logger Starter Pack
TagTemp is a compact water proof Contains 2 Tagtemp Data-
temperature data logger. Housed in an IP67 enclo-
loggers, a USB-IRLink and
sure, TagTemp can be installed in harsh environ-
ments in different applications. Logchart software. All you
It can be easily programmed and set via a handy need to get you started for
infrared IR-LINK 3 interface connected to a USB $199.00
port under Windows LogChart II software or with a
Palm compatible PDA IrDA interface under Pal-
mOS. Features
- Enclosure: IP67, flame retardant, ABS+PC
- Dimensions: 47 x 30 x 12 mm;
- Temperature measurement accuracy: ±0.5 ºC;
- Reading resolution: 14 bits or 16,384 levels;
- Memory capacity: 16,000 loggings;
- Reading intervals: from 1 second to 18 hours;
- Loggings can be programmed to start immediately, outset by the
device’s button, by date/hour or by a programmed setpoint or through a Price Each 1
PDA; LOG-011 TagTemp Starter Pack $199.00
- Loggings can be programmed to stop: at full memory; at some speci-
fied date and hour, number of samples or never (circular memory);

Price Each 1 5+ LogBox DA Logger

LOG-010 TagTemp 16K Readings $99.00 POA
LOG-002 IR-Link & Windows LogChart II $120.00 POA
Is a 2 channel data logger
Channel 1: NPN, PNP, Pulse or Dry Contact
LogBox RHT Data Logger Max. frequency: 4000 Hz or 20 Hz Maximum
counting: 65,535 per period.
Is a dual channel data logger with built-in tem- Channel 2: 0-20mA, 4-20mA, 0-50mV and 0-
perature and relative humidity sensors. Uses a 10Vdc
high quality, industrial grade humidity sensor, for Memory capacity: 32k readings
accurate and reliable operation in applications The LogBox-DA also provides a signal for
such as transportation, storage of goods, process commanding an external power supply
auditing and others. (battery) of a device connected to the logger.
This feature allows that external devices, such as a transmitter, be
Can be easily programmed and set via a handy powered only during the measurement sample time, thus extending
infrared IR-LINK 3 interface connected to a USB the autonomy of these external batteries.
port under Windows software or with a Palm com-
patible PDA IrDA interface under PalmOS. Log- This logger has been designed for monitoring water and irrigation flows
Chart II software allows for logger configuration,
recorded data retrieval, plotting, historical analysis Price Each 1 5+
and exports data to spread sheets. LOG-003 LogBox DA 32K Readings $289.00 POA
LOG-002 IR-Link & Windows LogChart II $120.00 POA
Price Each 1 5+
LOG-005 LogBox RHT 32K Readings $289.00 POA
LOG-002 IR-Link & Windows LogChart II $120.00 POA Field Logger
A stand-alone data logger which features
LogBox AA Data Logger 8 universal analogue inputs and will oper-
ate as a datalogger or as an RTU
Is a 2-channel data logger which can accept 0- (Remote Telemetry Unit using Modbus
20mA and 4-20mA, 0-50mV and 0-10V volt- Protocol) linked to a PC for on line re-
age, thermocouple, Pt-100 RTD signals inputs cording and supervision. Able to be
all in a small weatherprooof IP65 enclosure. mounted on a DIN rail, its 8 universal channels accept t/c J, K, T, E, N,
Setup and data retrieval is done in a PC via an R, S, B; 4-20mA, Pt100, 0-50mV without hardware change. Connection
infrared wand through the use of LOG CHART, to the input channels are via screw terminals. The Fieldlogger also fea-
a Windows compatible software which plots tures 2 alarm relay channels.
and prints graphs, lists loggings and exports The Fieldlogger is setup by the Configurator software. The Fieldlogger
data to spreadsheets. has a RS485 interface which allows communication to 1Km. A connec-
Memory capacity: 32k readings tion from the PC's RS232 port is made via a RS232/ RS485 converter.
The LogBox-AA also provides a signal for commanding an external Features include
power supply (battery) of a device connected to the logger. This fea- Internal memory (optional) for 128,000 recordings and real time clock.
ture allows that external devices, such as a transmitter, be pow- Input resolution: 12,000 levels.
ered only during the measurement sample time, thus extending the Accuracy: 0.1% of full scale.
life of these external batteries. Scanning: 8 channels in 0.5 seconds.
Reading rate: from 0.2s to 1 day.

Price Each 1
Price Each 1 5+
LOG-102 FieldLogger Datalogger 128k memory 24VDC $750.00
LOG-001 LogBox AA 32K Readings $269.00 POA
LOG-104 FieldChart Data Acquisition Software - 8 Channels $275.00
LOG-002 IR-Link & Windows LogChart II $120.00 POA

Page 17 Ocean Controls Catalog 2008

 OCEAN CONTROLS - DATA LOGGERS
Logomatic Serial Data Logger Logomatic V2 Serial Data Logger
The Lassen iQ Datalogger has The Logomatic Version 2 incor-
been a tremendous hit, but we porates the LPC2148 controller with
listened when our customers USB, battery charging, and microSD
asked for more flexibility. The support. This allows us to use the
Logomatic has the ability to record SparkFun LPC2148 USB bootloader for
not just Lassen iQ data, but any even easier and faster modification of
serial data! Now you can record the firmware. No programmer required!
for weeks with any size SD card The Logomatic v2 uses a USB mass
up to 1gig (we are still testing the storage stack to appear under any oper-
2gig cards). ating system as a flash drive. Logs are
created in FAT16 format on the micro-
With a little firmware tweaking, you can even run analog-to-digital con- SD media and can be downloaded
version on the various ADC input and record them. quickly over a USB connection by drag-
ging and dropping the text files from the device.
Recording frequency, serial data rate (variable from 2400bps to The microSD card can also be removed and inserted into a card reader
115200bps), and other various firmware settings are configurable via a to download the logs.
settings.txt file on the SD card. It's as simple as editing the text file on Board comes with a JST connector to be powered from our line-up of
the SD card from your computer, then inserting the SD card into the Log LiPo batteries or other power sources up to 7.5VDC. If you choose to
-O-Matic, and powering up the unit! use LiPo batteries, the Logomatic v2 has a built-in charger to charge
batteries off USB.
Price Each 1 5+
GPS-100 Logomatic Serial Datalogger $59.95 POA Price Each 1 5+
GPS-101 Logomatic V2 Serial Datalogger $89.95 POA

Lassen GPS iQ Evaluation Kit

This kit includes all the needed parts to
get you up and running instantly with our
GPS Trimble modules.

* Trimble Lassen IQ Receiver (GPS-IQ)

* USB Eval Board (Eval-IQ-USB)
* 6' A to B USB Cable (Cable-USB-A to
B-6)
* 12mm Lithium coin cell battery (Batt-
CC12)
* Interface cable (Con-IQ)
* Active antenna with magnetic mount and 5m cable (ANT-GPS-
VTorch)

PC Software is available to connect to the board

Price Each 1 5+
GPS-001 Lassen iQ GPS Evaluation Kit $141.50 POA

Page 18 Ocean Controls Catalog 2008

 OCEAN CONTROLS - RELAY CONTROLLERS
USB I/O Controller GOIC Modbus I/O Controller

The KT-5220 is a USB Con- The GOIC Modbus I/O Card acts as
trolled I/O module for interfacing PC's to a Modbus RTU slave. It features
real world applications such as controlling - Modbus Slave Address can be set.
lights, pumps and sprinkler systems, read- - Baudrate and parity selectable
ing sensors and monitoring switches and - Two 10bit analog inputs can be 4-
other digital signals. The list is endless. 20mA, 0-20mA or 0-5V inputs.
- Optional 12 bit Analog output. 4-
20mA or 0-5VDC output
The controller provides eight relay outputs
- Six digital inputs can sense NPN,
each capable of switching 5 amps
relay contacts or 0-5V TTL signals
@240VAC and four opto-isolated digital
- Two relay outputs with Normally open and closed contacts. Relays can
inputs. Other features of the controller are
switch 3A @240VAC.
8 Relay Outputs
- Two of the digital inputs can be used to communicate with DS18s20
4 Opto Isolated inputs
temperature sensors to monitor temperature over the range -55 to 125
2 Analog Inputs (0-5V or 0-20mA)
degC
1 PWM Output
- Two of the digital counters also function as pulse counters
All connections to the I/O are via screw connectors.
- 12 to 15VDC powered.
A DLL and an example VB programs are provided
Communication via RS232 or RS485.
Power Indicator LE
DIN Rail Mount Option
Requires 12VDC plug pack and D25 Male-Female Cable
All external connections are via screw terminals

Price Each 1 5+ Price Each 1 5+

KTA-220 USB I/O Controller $135.00 $121.50 KTA-211 Modbus Card with 4-20mA Analog Output $124.50 $112.00

Serial I/O Controller Multi Drop Serial I/O Controller

The controller provides eight relay out- The multi drop controller provides eight
puts each capable of switching 5 amps relay outputs each capable of switching
@240VAC and four opto-isolated digital 5 amps @240VAC and four opto-
inputs. All connections to the I/O are via isolated digital inputs. All connections to
screw connectors. the I/O are via screw connectors.
It is controlled via a computers RS232 It has been programmed so that each
serial port via ASCII commands. Serial controller has its own programmable
cables can be much longer (up to 35 address. Up to 10 controllers can be
metres) allowing 'remote' control. Use multi dropped on a RS232 serial line or
our RS232/RS485 convertors and dis- RS485 serial line.
tance of over a 1000 metres can be It also has been programmed so that
obtained. the 4 digital inputs can be used as 24 bit counters
Requires 12VDC plug pack and D9 Male-Female Cable Requires 12VDC plug pack and D9 Male-Female Cable
A multi drop kit is available to convert the standard serial I/O controller
into a Multi Drop Serial I/O controller

Price Each 1 5+ Price Each 1 5+

KIT-108 As Kit $95.00 $85.50 KTU-108 Upgrade Kit $25.00 $22.50
KTA-108 Assembled and Tested $112.50 $101.25 KTM-108 Multi Drop Controller Assembled $129.00 $116.10

Pixel Programmable Controller Board

This controller is based around the PICAXE 28X1 microcontroller. The

PICAXE controllers have been featured in Silicon Chip magazine.
The controller features 4 Ten bit Analog Inputs (0-5V), 8 digital inputs
and 8 relay outputs. Each of the digital inputs has pull up resistors to
allow easy interfacing to relay contacts, switches and 0 to 5V inputs
etc. Each relay output has a LED to indicate its state and is capable of
switching 5 amps @240VAC.
All connections to the I/O are via screw connectors. The Pixel Control-
ler measures 122x111x25mm.
The software provides a complete programming environment for gen-
erating BASIC programs for the PICAXE. Programs can be edited,
compiled and downloaded.
The Pixel Controller is fitted with a Picaxe 28X microcontroller. Extra
Price Each 1 5+
features include - 4 Ten bit analog inputs (0-5V)
PIX-002 Pixel Controller Board $129.50 $112.00
- Program memory approx. 1000 lines with intelligent download
PIX-003 Pixel Controller Board In Din Rail $159.50 $139.00
- Data memory 260 bytes
Requires 12VDC power and D9 Male-Female Cable

Page 19 Ocean Controls Catalog 2008

 OCEAN CONTROLS - RELAY CONTROLLERS
PC Parallel Port Relay Controller PC Parallel Port Relay Card In Box

This PC Parallel Port Essentially exactly the same as our PC

Relay board allows you Parallel Port Relay Board but supplied
to convert your into a fully assembled in a high quality plastic
dedicated controller. case. The software provided for the
Simply connect a printer board works with this unit
cable from your com- All components provided including a
puter to the D25 con- plastic case with pre-punched and silk
nector on the relay board. There are 8 relays each capable of switching screened front and rear panels to give
12VDC/120VAC @ 10A and 240VAC @ 5A. All connections to the relay the product a professional and attractive
contacts are via screw terminals finish as shown in the photos. Finished
Each relay has an LED to indicate when it is operated. Dimensions (mm): 140Wx110Dx35H.
Requires 12VDC plug pack and D25 Male-Female Cable Requires 12VDC plug pack and D25 Male-Female Cable

Price Each 1 5+ Price Each 1 5+

KIT-074 As Kit $55.00 $49.50 KTA-165 Assembled in Box $89.00 $80.10
KTA-074 Assembled and Tested $69.00 $62.10

VIOM Controller

The VIOM is a truly versatile Input/Output Control Module. Each of its 16 outputs may be con-
trolled locally by its own inputs, timers/counters or remotely via the RS232 Serial Port. In local
mode the outputs can be controlled by an AND/OR combination of any of the inputs. In addition,
delays can be inserted before the output becomes active and then ON and OFF periods can be
defined to allow for cyclic operation. Either active high or active low can be individually selected
on each output.
Outputs may be controlled from a host via the Serial Port either individually or collectively. The
host may also interrogate the module for the current status of the outputs.
Timer/counter registers can be controlled from the inputs or the Serial Port. Thresholds can be
defined which can be used to trigger outputs. Values of the registers can be read via the Serial
Port.
Inputs can be interfaced with clean contacts or CMOS/TTL outputs and can be defined as active high or active low. They can be programmed to re-
port to a host via the Serial Port either periodically or on change. Alternatively, the host can interrogate the module and request the status of all inputs.
Dedicated 8 way display and relay modules can be connected directly to the
Price Each 1 5+
module via ribbon cable.
NET-020 VIOM Card $102.50 $85.00
VIOM is equipped with non volatile memory so that after programming it can
be disconnected from the host and work in stand alone mode..

SOM96 Relay Card

The SOM96 Serial Output Module is designed to be used with PCs. Each module has 4 independent single pole
changeover relays which can be independently addressed from the PC. The standard RS232 serial output is converted
to RS485 by the first module and this is used to drive subsequent modules. Each module may be allocated one of 256
addresses, thus allowing for control of 1024 relays. Addresses are selected using an 8 way DIL switch and more than
one module can have the same address.
This will allow several relays to be controlled simultaneously. Modules can be physically placed in positions remote from the PC. The link from the PC
Serial Port to the first module is restricted to approximately 50 metres. After that modules can be located as much as 200 metres apart. Connection
between the PC and the first module would normally use a standard null terminated modem lead connected to the 9 pin 'D' connector. From the first
module to subsequent units twin screened cable is recommended with con- Price Each 1 5+
nections to the screw terminal block provided. NET-030 SOM-96 Relay Card $109.00 $98.00

ARDUINO Card
.The Arduino Diecimila is an open-source physical computing platform based on a simple i/o board and a develop-
ment environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone
interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-
source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
It is a microcontroller board based on the ATmega168 (datasheet). It has 14 digital input/output pins (of which 6 can
be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP
header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a com-
puter with a USB cable or power it with a AC-to-DC adapter or battery to get started.
Summary
Microcontroller ATmega168
Input Voltage (recommended) 7-12 V
Input Voltage (limits) 6-20 V
DC Current per I/O Pin 40 mA
Flash Memory 16 KB (of which 2 KB used by bootloader) Price Each 1 5+
SRAM 1 KB ARD-001 Arduino Card $45.00 POA

Page 20 Ocean Controls Catalog 2008

 OCEAN CONTROLS - ARDUINO CONTROLLERS
ARDUINO SKINNY ARDUINO WEE

This is a 3.3V Arduino running the 8MHz boot- This is a 3.3V Arduino running the 8MHz boot-
loader (select 'LilyPad' within the Arduino soft- loader (select 'LilyPad' within the Arduino soft-
ware). The Skinny is not a fully certified Ardu- ware). The Wee is not a fully certified Arduino
ino board. We're working with Arduino.cc to- board. Future revisions will have multiple changes.
wards certification. Future revisions will have Wee does not come with connectors populated so that you can solder in
multiple improvements. This board does not work with the 5V Arduino any connector or wire with any orientation you need.
shields but does work nicely with the prototyping shield.
Skinny does not come with connectors populated so that you can solder The Wee was designed to minimize the cost of an Arduino. The Wee is
in any connector or wire with any orientation you need. like the Arduino Mini (same pin out) but to keep the cost low, only SMD
To minimize the cost of an Arduino the USB connection has been components are used and it is two layer. This board connects directly to
moved off board. This board connects directly to the LilyPad USB Link the LilyPad USB Link (listed below). Wee does not currently support
(listed below). Skinny does not currently support remote reset from the remote reset from the Arduino Software, but we're working on it.
Arduino Software.
Features:
Features: ATmega168V running at 8MHz with external resonator (0.5% tolerance)
- ATmega168V running at 8MHz internal oscillator Low-voltage board needs no interfacing circuitry to popular 3.3V devices
- Low-voltage board needs no interfacing circuitry to popular 3.3V de- and modules (GPS, Accelerometers, sensors, etc)
vices and modules (GPS, Accelerometers, sensors, etc) 3.3V regulator
- USB connection off board DC input 3.3V up to 12V
- 3.3V regulator On board Power and Status LEDs
- DC input 3.3V up to 12V
- Resettable fuse prevents damage to board in case of short
- Power select switch acts as on/off switch

Price Each 1 5+ Price Each 1 5+

ARD-002 Arduino Skinny Controller $27.50 less 10% ARD-003 Arduino Wee Controller $26.00 less 10%

Arduino Lilypad Arduino Lilypad Starter Kit

Description: This is LilyPad Arduino - the main Description: This is a starter kit with every-
board consisting of an ATmega168V with the Ardu- thing you need to get going with LilyPads.
ino bootloader and a minimum number of external
components to keep it as small (and as simple) as Kit includes:
possible. Board will run from 2V to 5V.
* LilyPad Mainboard
LilyPad is a wearable e-textile technology developed by Leah Buechley * LilyPad Power Supply
and cooperatively designed by Leah and SparkFun. Each LilyPad was * LilyPad Tri-Color LED
creatively designed to have large connecting pads to allow them to be * LilyPad Light Sensor
sewn into clothing. Various input, output, power, and sensor boards are * LilyPad USB Link
available. They're even washable! * Mini USB Cable
* 1 spool of 234/34 Conductive Thread
Dimensions:
* 50mm outer diameter All you need is a AAA battery and a needle!
* Thin 0.8mm PCB

Price Each 1 5+ Price Each 1 5+

ARD-005 Arduino LilyPad Controller $27.50 less 10% ARD-006 LilyPad Starter Kit $99.00 less 10%

Lilypad USB Link

.Description: This is a USB to UART board
that allows easy reprogramming of the LilyPad
main board without the need for soldering.
This board is based on the FT232RL IC from
FTDI.
Board comes assembled with female connector as shown.

Features:
* Implements full v2.0 USB protocol
* Needs no external crystal
* Internal EEPROM for device ID and Product Description strings
* Royalty-Free Driver support for Windows, Linux, and Mac OSX

Dimensions: 1.5x0.92" EEPROM 512 bytes

Clock Speed 16 MHz

Price Each 1 5+
ARD-010 LilyPad USB Link $17.50 less 10%

Page 21 Ocean Controls Catalog 2008

 OCEAN CONTROLS - REMOTE CONTROLLERS
2 Channel UHF Relay Controller Module 1 Channel UHF Relay Controller Module

Features 2 Relays rated to 2A at 24V DC and This mains powered unit can switch 240V
an NPN Transistor Output. AC at 6 Amps via its inbuilt relay. Up to 10
Each Relay can be set to operate in 2 sec- remotes can be taught to control the unit.
ond momentary mode or ON-OFF latching The receiver can operate in 4 modes, On/
mode. Off, Latched, Momentary and 2 minute
Pushing both buttons together operates the Timed operation. On/Off: The contacts are
Transistor Output. switched alternately. Latched: The contacts
Alternatively the Module can be put into are switched. Momentary: The button must
'Gate Opening' or 'Garage Door' mode. In this be held down for 1 seconds to operate the
mode each relay operates for 2 minutes when relay for 1 second. 2 Minute Timed Output:
the corresponding button is pushed. Pushing The button must be held down for 2 sec-
any button on the remote while either of the onds to operate the relay for 2 minutes.
relays are on when in this mode will switch
the relays off. Operates on 240VAC
Operates on 12-24V DC or 15V AC. 30m Outdoor Range.
30m Outdoor Range. Supplied with one remote
Supplied with one remote and is housed in an attractive case with a Dimensions 73 x 100 x 25mm, Antenna Protrudes 86mm.
Microswitch Tamper Output for Alarm Systems if the cover is removed.
Dimensions 73 x 100 x 25mm, Antenna Protrudes 86mm.
Price Each 1 5+ Price Each 1 5+
UHF-001 2 Channel UHF Relay Controller 24VDC $122.68 $110.41 UHF-002 1 Channel UHF Relay Controller 240VAC $122.68 $110.41
UHF-003 Spare Key Remote $42.90 $38.61 UHF-003 Spare Key Remote $42.90 $38.61

Additional UHF Mains Outlets

Remote Controlled Mains Outlets

These are an Additonal Mains Outlet for the UHF-

Allows remote control of just about any appliance in the
010 Remote control as shown above
home! This 8 channel mains switching
package is suitable for switching up to
1000W. This makes it perfect for auto- Maximum switching power: 1000W
mating devices around the home at the Transmission frequency: 433.92MHz
touch of a button. Extra mains switches Operating range: 20m
are available allowing up to 8 mains
outlets to be controlled remotely. The
RF signal used means you don't even
need to be in line-of-sight to the outlet
unlike some infra-red models available
on the market. Please check power
consumption of your appliances before
making your purchase Price Each 1 5+
UHF-011 1 Additional UHF Mains Outlet $27.23 24.50
Price Each 1 5+
UHF-010 1 UHF Remote Control Mains Outlet $36.32 $32.70

Rolling Code 2 Channel Relay Board Rolling Code 4 Channel UHF Relay Board
A 'state of the art' UHF remote control
A 'state of the art' UHF remote con-
almost impossible to 'crack'. Uses a pre
trol almost impossible to 'crack'.
-built 'keyfob' style transmitter (as used
Uses a pre-built 'keyfob' style trans-
in many car lock systems) with 2
mitter (as used in many car lock
pushbuttons, one for each relay on the
systems) with 4 pushbuttons, one for
matching receiver board. Each relay
each relay on the matching receiver
can be either latching or momentary in
board. Each relay can be either
operation. An LED for each relay indi-
latching or momentary in operation.
cates when it is operated. The receiver
An LED for each relay indicates
board uses a pre-built UHF receiver
when it is operated. The receiver
module to decode the transmitter sig-
board uses a pre-built UHF receiver
nal.
module to decode the transmitter
Up to 15 transmitter units can be learnt
12VDC plug pack required signal.
by one receiver unit.
12VDC Plug Pack Required

Price Each 1 5+ Price Each 1 5+

KIT-157 As Kit with transmitter $65.00 $58.50 KIT-180 As Kit $81.00 $72.90
KTA-157 Assembled and Tested $80.00 $72.00 KTA-180 Assembled and Tested $115.00 $98.60
KTT-157 Additional Transmitter $21.00 $18.90 KTT-180 Additional Transmitter $23.50 $21.50

Page 22 Ocean Controls Catalog 2008

 OCEAN CONTROLS - REMOTE CONTROLLERS
Tx and Rx Modules Used in KTA-157
Rolling Code 10 Channel UHF Relay Board

This kit uses the same Tx/RX pair as These are the same 2 button transmitters
4Channel Controller but it uses all 10 de- and receivers used in our rolling code 2
fined keypress combinations out of the 4 channel 434MHz UHF relay board
buttons to activate relays. Buttons 1, 2, 3, Battery is already fitted into the transmitter
and 4 (of course) and the buttons 1&2,
1&3, 1&4, 2&3, 2&4, and 3&4 pressed
together. A PIC16F628 does ALL the work Price Each 1 5+
Toggle or momentary mode is determined KTT-157 A17-Tx 2 Channel UHF Transmitter $21.00 $18.90
by keeping the one or two buttons de- KTR-157 A17-Rx 2 Channel UHF Receiver $19.00 $17.10
pressed for more than 2 seconds and then
that relay will stay in that mode until an-
other >2 sec keypress. Small relays are Tx and Rx Modules Used in KTA-180
used to save weight and board area.
12VDC plug pack required
These are the same 4 button transmitters and 4 channel re-
Price Each 1 5+ ceivers used in our rolling code 4 channel
KIT-181 As Kit $90.00 $81.00 434MHz UHF relay board.
KTA-181 Assembled and Tested $125.00 $112.50 Battery is already fitted into the transmitter
KTT-181 Additional Transmitter $23.50 $21.50

Infra Red 12 Channel Relay Board Controller Price Each 1 5+

KTT-180 A16-Tx 4 Channel UHF Transmitter $23.50 $21.15
This kit comprises a commercial 14- KTR-180 A16-Rx 4 Channel UHF Receiver $19.00 $17.10
button IR remote controller PLUS a
12 channel relay board. All 12 relays
are provided on the receiver board -
nothing more to add. Makes it very Infra Red Relay Controller Board
simple to add infrared remote control This kit allows you to turn on and off a variety of electrical de-
to any project or existing equipment. vices using almost any household infrared remote control unit
Indicator LEDs show which relay is (e.g. TV, video, satellite, hi-fi, etc). Relay output rated at 12VDC
operated. Operating range up to 18 5A or 240VAC 3A. If you wish to switch heavier loads use our
metres/60 feet (length of the factory!). DIN mounted relays
12VDC Plug Pack Required
Push any button of the remote control and the PCB mounted
relay will turn on. Push any button a few seconds or hours later
Price Each 1 5+ and the relay will toggle off.
KIT-142 As Kit $84.00 $75.60 Supply: 8 - 15V DC required
KTA-142 Assembled and Tested $114.00 $102.60 PCB measures: 28x74mm.
RIR-101 12 Button Remote $20.00 $18.00
Price Each 1 5+
KIT-058 As Kit $20.50 $18.45
KTA-058 Assembled and Tested $34.50 $31.00

UHF Sequence Logic Controller

Our UHF Sequence Logic Controller allows you to program the operation of 6 relays based on the
condition of the UHF transmitter buttons and digital inputs. You develop the program on your PC,
test it on the PC and then download it.
Some control examples are
- On pushing a single button you could automatically open a gate wait a few seconds and then
close it.
- Push button 'x' closes relay 'x' and switches off the other relays.
- Security system button 1 opens a gate and turns on the lights, button 2 just turns on the lights
for a defined length of time.
- In photography pushing button 1 turns on relay 1 to wind on film then relay 2 is turned on to take the photograph , waits a second then repeats the
process 60 more times.
The applications are endless
The logic controller features Price Each 1 5+
- 4 button key FOB UHF 433MHz Transmitter KTA-230 Wireless Sequence Logic Controller. $159.00 $143.10
- 6 Relays with changeover contacts can switch 5 amps @240VAC KTA-231 Wireless Sequence Logic Controller no transmitter $129.00 $116.10
- 4 Isolated Digital Inputs KTT-180 A16-Tx 4 Channel UHF Transmitter $23.50 $21.15
- 2 0-5V Digital Inputs
- screw terminal connections for all inputs and outputs
- 12VDC powered

The controller can handle up to 15 transmitters so if you can have a number of people with their own transmitters operating the controller. The transmit-
ters use rolling code technology so it’s close-to-impossible to electronically “crack”
The 4 button transmitter will operate the controller from a distance of up to 50m clear line of site

Page 23 Ocean Controls Catalog 2008

 OCEAN CONTROLS - REMOTE CONTROLLERS
Remote Telemetry Unit

The KTA-235, KTA-236 and KTA-237 are an ASCII based easy to use Remote Telemetry Unit or
RTU. It is designed to be used with a PC or PLC, where the PC or PLC can remotely control and
monitor the status of 6 Relays, 4 optically isolated inputs and 2 Analog inputs. The Analog inputs can
also be set to behave as dry contact or open collector digital inputs in cases where analog inputs are
not required. Each unit is individually addressable, which means that multiple controllers can
be used on the serial link, and the option of a serial modem means that units can be wirelessly con-
trolled up to 1000m from the host.

The RTU comes in 3 forms

KTA-235 communicates via an RS232 serial connection. This connection can be multidropped using a
combination of diodes and resistors
KTA-236 using a UM96 (9600 baud) wireless modem card. A distance of 500m can be achieved via direct line of sight.
KTA-237 using a UM12 (1200 baud) wireless modem card. A distance of 1000m can be achieved via direct line of sight.

The wireless modems operate in the licence free 433MHz band. Price Each 1 5+
Measures 135(L) x 140(W) x 35(H)mm KTA-235 Serial Remote Telemetry Unit $129.00 $116.10
KTA-236 Wireless Remote Telemetry Unit 9600Baud.$179.00 $161.10
KTA-237 Wireless Remote Telemetry Unit 1200Baud.$179.00 $161.10

Wireless Back To Back Controller

We have now reprogrammed our KTA-235 Remote Telemetry Unit or RTU to operate as a back to
back controller.

What is a Back to Back Controller?

The KTA-238 has 4 isolated digital inputs, 2 non isolated 0-5V digital inputs and 6 relay outputs. Two
KTA-238's are connected by a communications link. The link can be RS232, RS485 or wireless. The
status of the inputs for each controller are automatically transmitted to the other controller where they
are written to the relay outputs. In the diagram below you will see the switch S1 at Site 2 turns on
Motor 1 at Site 1
the switch S2 at Site 2 turns on Lamp 2 at Site 1
the switch S3 at Site 2 turns on Horn 3 at Site 1
the switch S5 at Site 1 turns on Lamp 5 at Site 2

As you can imagine the applications are endless Price Each 1 5+

Turn on a pump from your house. Security if a perimeter contact is broken a KTA-238 Wireless Back to Back Controller. $179.00 $161.10
horn or lamp is activated at the central location. Alarm if a level in a tank gets KTA-239 Serial Back to Back Controller $129.00 $116.10
low or high an alarm is activated.

Each KTA-238 controller provides 6 changeover relay outputs each capable of switching 5 amps @240VAC and four opto-isolated digital inputs. All
connections to the I/O are via screw connectors.

Measures 135(L) x 140(W) x 35(H)mm.

OCEAN CONTROLS - TEMPERATURE CONTROLLERS

N322 Temperature Thermostats

The Novus N322 Thermostats can be used with NTC Thermistors, PT100 and J Type Thermocouples.
The NTC Thermistor model is provided with a NTC Thermistor and 2m long cable to get you up and running
immediately. The N322 Thermostats have two relay outputs which can be configured for heating or cooling
or a number of different alarm modes and are easily configured by the front panel buttons and display. The
Temperature and status of Relays are shown on the LED Display.
Great for Aquariums, Home Brewing and many other applications.

- Sensor input: Pt100 (-50 to 300°C), Pt1000 (-200 to 530ºC), Thermocouple J (0 to 600°C) or thermistor (-
50 to 120ºC).
- IP65 enclosure frontal protection
- Output: 2 relays SPST
- Resolution: 0,1°C from -19,9 to 99,9°C
- Accuracy: ± 0,5°C/°F ±1 digit (Pt100/Pt1000/Thermistor) and ±2°C for
Thermocouple. Price Each 1 5+
- Adjustable hysteresis CET-001 N322 NTC Thermistor Electronic Thermostat $89.00 $80.10
- Sampling: 1,5 per second CET-002 N322 Pt100 Electronic Thermostat $99.00 $89.10
- Working temperature: 0 to 50°C CET-003 N322 J TypeTC Electronic Thermostat $99.00 $89.10
- Power supply: 85-250Vac (internal) 12VDC optional CET-010 N322 NTC Electronic Thermostat 12VDC $89.00 $80.10

Page 24 Ocean Controls Catalog 2008

 OCEAN CONTROLS - TEMPERATURE CONTROLLERS
N322T Temperature Thermostats with Timer

Temperature controller for heating and refrigeration purposes with timer support. It has PT100 RTD, ther-
mistor NTC or J thermocouples inputs available. Allows energy time delay and minimum on/off time settings
The NTC Thermistor model is provided with a NTC Thermistor and 2m long cable to get you up and run-
ning immediately.

The timer output is typically used for the system defrost. The t1 and t2 parameters define, respectively, the
interval and duration of the defrost cycles.

Sensor input: Thermistor (-50 to 120 ºC), Pt100 (-50 to 300 °C), Thermocouple J (0 to 600 °C).
IP65 enclosure frontal protection
Output: 10 A control relay and 3 A alarm relay
Resolution: 0,1 °C from -19,9 to 199,9 °C
Operating temperature: 0 to 40 °C
Power supply: 100~240 Vac/dc (± 10 %) or 24 Vdc/ac (12~30 Vdc/ac) Price Each 1 5+
RS-485 digital communication; RTU MODBUS protocol (optional) CET-006 N322T NTC Timer 240VAC $109.00 $98.10
Dimensions: 75 x 33 x 75 mm CET-008 N322T NTC Timer with RS485 240VAC $114.00 $102.60

N323R Temperature Thermostats

N323R Model: This model of temperature controller controls the end of defrosting by temperature. It fea-
tures three output relays: compressor, defrosting and fan. It operates with two sensors (NTC), one for
room temperature and other to be attached to the evaporator for control of defrost end. Employed in cool-
ing and defrosting.
Example: Frozen chambers and displays.

Sensor input: Thermistor (-50 to 120 ºC), Pt100 (-50 to 300 °C), Thermocouple J (0 to 600 °C).
IP65 enclosure frontal protection
OUTPUT1: Relay SPDT; 1 HP 250 Vac / 1/3 HP 125 Vac (10 A Resistive)
OUTPUT2: Relay: 3A / 250 Vac, SPST
OUTPUT3: Relay: 3A / 250 Vac, SPST Resolution: 0,1 °C from -19,9 to 199,9 °C
Operating temperature: 5 to 50 °C
Power supply: 100~240 Vac/dc (± 10 %) or 24 Vdc/ac (12~30 Vdc/ac)
RS-485 digital communication; RTU MODBUS protocol (optional)
Price Each 1 5+
Dimensions: 75 x 33 x 75 mm
CET-030 N322R NTC Defrost 240VAC $109.00 $98.10

N322 Relative Humidity and Temperature Controller

The N322RHT is a digital controller for relative humidity and temperature. Its 2 relay outputs can be configured independently as control or alarm, ei-
ther for temperature or relative humidity. A Relative Humidity and Temperature or RHT probe (3 m length) is provided along with the instrument
Both the Temperature, Humidity and status of Relays are shown on the LED Display. Applications include fruit storage and air conditioning.

INPUT SENSOR:
Humidity measurement: Accuracy: Refer to Figure 01;
Stability: < 1 %RH / year;
Range: 0 and 100 % RH
Linearity error: << 1 % RH; Long term Stability: < 1 % RH
Response time: 4 seconds in the range from 10 to 90 %, with slow moving air. Outside this range, up to 48 hours.
Temperature measurement: Accuracy: Refer to Figure 1;
Repeatability: ±0.1 °C;
Range: -40 and 120 °C (-3.8 to 211.8 °F)
Response time: up to 30 seconds in slow moving air.
WARM-UP: 15 minutes

MEASUREMENT RESOLUTION:
Temperature: 0.1º for indications between –19.9º and 119,9º 1º elsewhere
RH: 1%
OUTPUT1:Relay SPDT; 1 HP 250 Vac / 1/3 HP 125 Vac (10 A Resistive)
OUTPUT2:Relay: 3A / 250 Vac, SPST
POWER SUPPLY: 100~240 Vac (± 10 %) or optional 24 Vdc/ac (12~30 Vdc/ac)
DIMENSIONS: Width x Height x Depth: 74 x 32 x 75 mm PANEL CUT-OUT: 70 x 29 mm WEIGHT: 100
g
ENVIRONMENT: Operating temperature: 0 to 40 °C (32 to 122 °F) Storage temperature: -20 to 60 °C (-4 to 140 °F) Relative humidity: 20 to 85 % non
condensing
CASE: Polycarbonate UL94 V-2; Protection: Front panel: IP65, Box: Price Each 1 5+
IP42 CET-007 N322RHT Temperature and RH Controller 240VAC $195.00 POA
RS-485 digital communication; RTU MODBUS protocol (optional)

Page 25 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PROCESS CONTROLLERS
N440 Process Controller
The N440 is an ON/OFF action digital temperature controller which provides maximum versatility at an eco-
nomic price and can be a great substitute for the obsolete analog controllers.
It accepts thermocouples type J, K or Pt100 RTD and features one relay and one voltage pulse output for
Solid State Relays.
Keypad programming is simple and intuitive and parameters setting can be selectively locked.
The N440 is aimed at simple temperature heating or cooling processes applications that require low cost and
yet demand good display accuracy with simple operation.

Features include
- Temperature ranges:
Thermocouple J: 0 to 600 ºC, 1 ºC resolution.
Thermocouple K: 0 to 1370 ºC, 1 ºC resolution.
Pt100: -50 to 530 ºC; 0.1 ºC resolution from -19.9 °C and 199.9 ºC
- Thermocouples according to NBR 12771/99, Pt100 NBR 13773/97.
- Pt100 three-wire connection with automatic cable resistance compensation.
- Pt100 excitation current: 170 uA.
- Internal cold junction compensation for thermocouples.
- Accuracy: Thermocouple: 3 ºC maximum error, Pt100: 1 ºC maximum error.
- A/D converter resolution: 13 bits. Sampling rate: 5 measurements per second.
- Display: 3½ digit LED with 13 mm height.
- Indication and control time response: < 2 s.
- Output 1: SPDT relay, 5 A / 250 Vac. Output 2: 5 Vdc / 20 mA pulse. Optional: 3 A / 250 Vac relay.
- Operating ambient: 0 to 50 ºC, 20 to 85 % Relative Humidity, non-condensing.
- Dimensions: 48 x 48 x 110 mm (1.89” x 1.89” x 4.33”). Panel cutout: 45.5 x 45.5 mm.
- Power: 100 to 240 Vac/dc.
Price Each 1 5+
CET-010 N440-CPR In: RTD Out: 1 relay+pulse Pwr: 240VAC $109.00 POA
CET-015 N440-JPR In: J T/C Out: 1 relay+pulse Pwr: 240VAC $114.00 POA
CET-020 N440-KPR In: K T/C Out: 1 relay+pulse Pwr: 240VAC $109.00 POA

N480 Process Controller

The N480D series of PID temperature controllers was designed for non-experienced novice users for com-
bining extreme simplicity in operation with high performance only found in expensive high end controllers.
It is a low-cost instrument which can be easily installed and operated. It accepts J,K and S thermocouples
and Pt100 RTD, features a relay and pulse output for driving solid state relays and optionally can be sup-
plied with a linear 4 to 20 mA output.
Autotuning PID function, dual display, full range universal power supply and ramps soak function are stan-
dard.
It greatly surpasses the old and obsolete analog controllers in performance with ease of operation.

Features include
- Accepts thermocouples type
J range -50 ºC to 760 ºC, K range -90 ºC to 1370 ºC, T range -100 ºC to 400 ºC
R range 0 to 1760 ºC, S from 0 to 1760 ºC, E range -30 a 720 ºC
N range -90 a 1300 ºC
- cold junction compensation.
- Accepts 2 or 3-wire Pt100 RTD, range -200 ºC to 530 ºC, with cable resistance compensation.
- Pt100 excitantion current: 0.170 uA.
- Internal A/D resolution: 15,000 levels
- Displayed resolution: 7,500 levels.
- Four-digit 10 mm red display for measured variable and four-digit 7 mm green display for setpoint.
- Sampling rate: 5 measurements per second.
- Control output update: 200 ms.
- 5 Vdc 20 mA logic control output.
- 1 SPDT relay and 2 SPST 3A @ 250 Vac relays.
- Power: 100 to 240 Vac/dc, 50/60 Hz; optional 24 Vdc/ac.
- Power consumption: less than 9 VA.
- Operating environment: 0 to 55 ºC, 20 to 95 % RH.
- Front panel: IP65, Polycarbonate UL94 V-2, Back panel: IP30, ABS+PC UL94 V-0.
- Weight: 140 g with 1 relay, 160 g with 3 relays.
- Dimensions: 48 x 48 x 110 mm (1.89” x 1.89” x 4.33”).

Price Each 1 5+
CET-050 N480D T/C, RTD 2 Relays+Pulse Pwr: 240VAC $139.00 POA
CET-051 N480D T/C, RTD 2 Relays+Pulse Pwr: 24VDC $139.00 POA
CET-052 N480D T/C, RTD 3 Relays Pwr: 240VAC $139.00 POA

Page 26 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PROCESS CONTROLLERS
N1100 Process Controller

The N1100 series of Universal Process Controllers is a real breakthrough in versatility for holding in one
single instrument all the major features that are needed for the vast majority of industrial processes.
The sophisticated and consistent software and its advanced truly universal SMT circuitry make the N1100
the only 1/16 DIN PID instrument in the world to accept configuration of both input signal and control output
through the front keyboard without any hardware change.
From the very simple applications as a temperature controller to the most complex systems of distributed
control with PLC's or SCADA networks, the N1100 is the right answer to your needs for industrial, building
or laboratory automation

Features include
- Universal Input accepts: Thermocouples J, K, T, S, Pt100, 4-20mA, 50mV, 0-5Vdc
- Double LED display: red for PV and green for SV.
- Outputs: 3A/250Vac Relay, linear 4-20mA and logic pulse for solid state relays available.
- 2 alarms (Relays SPST) more Out linear 4-20mA or logic pulse (standard).
- Up to 2 time relays, 0 to 6500 seconds.
- Input resolution: 12,000 levels.
- PV or SP retransmission in 4 to 20mA.
- RS485 comm with Modbus RTU protocol (optional).
- Auto tuning PID control.
- Auto/Manual mode, bumpless transfer.
- Remote setpoint input (4 to 20mA).
- Programmable Soft start up to 9999 seconds.
- Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments.
- Power: 85 to 264 Vac, 50/60 Hz. Dimensions: 48 x 48 x 106 mm.

Price Each 1 5+
PID-001 N1100 Process Controller $175.00 POA
PID-002 N1100 Process Controller with RS485 $199.00 POA

N2000 Process Controller

The N2000 Universal Process Controller is a real breakthrough in versatility for holding in one single instrument all the
major features required in the vast majority of industrial processes.
With a sophisticated and consistent software and its advanced truly universal circuitry, the N2000 accepts configuration
of both input signal and control output through the front keyboard without any internal hardware change.
Power supply for remote loop powered transmitters is standard and is a must for high-end applications.
From the very simple applications as a temperature controller to the most complex systems of distributed control with
PLC’s or SCADA networks, the N2000 is the right answer to your needs for industrial or laboratory automation.
The N2000S is specific for applications in controlling servo motorized valves, servo actuators and dampers by
means of two time proportional relays. :

Features include
- Universal Input accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc.
- Double LED display: red for PV and green for SV.
- Dual SPST 3A/250 Vac relays and dual SPDT 5A/250 Vac relays can be individually programmed for control or alarm.
- Isolated 4-20mA output with 1500-level resolution, maximum 550 ohm load for control or PV/SV retransmission. It can
also be configured for digital input or output (10 Vdc/20 mA).
- Sampling rate: 4 measurements per second.
- One digital input for dry contact with 5 programmable functions.
- Remote setpoint input for 4-20 mAdc signal (N2000).
- 24 Vdc/30 mA supply output for remote transmitter excitation.
- RS485 comm with Modbus RTU protocol.
- Auto tuning PID control.
- Auto/Manual mode, bumpless transfer.
- Programmable Soft start up to 9999 seconds.
- Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments.
- Measured value resolution: 12,000 levels.
- Control output update: 250 ms.
- Up to four configurable relays, two timer alarms.
- Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event.
- Alarm initial blocking function.
- Power: 85 to 250 Vac, 50/60 Hz; optional 24 Vdc/ac.
- Dimensions: 48 x 96 x 92 mm.

Price Each 1 5+
PID-010 N2000 Process Controller with RS485 $239.00 POA
PID-020 N2000S Servo Positioning Process Controller with RS485 $239.00 POA

Page 27 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PROCESS CONTROLLERS
N3000 Process Controller

The N3000 Big Digit Universal Process Controller is a real breakthrough in versatility for holding in one
single instrument all the major features required in the vast majority of industrial processes.
With a sophisticated and consistent software and its advanced truly universal circuitry, the N3000 accepts
configuration of both input signal and control output through the front keyboard without any internal hard-
ware change.
Power supply for remote loop powered transmitters is standard and is a must for high-end applications.
From the very simple applications as a temperature controller to the most complex systems of distributed
control with PLC’s or SCADA networks, the N3000 is the right answer to your needs for industrial or labo-
ratory automation. A Modbus RTU RS485 connection is fitted. You can use the Superview software or
ISEE-Modbus Software to monitor and set parameters in the controller

Features include
- Double LED display: red for PV (18 mm) and green for SV (13 mm).
- Accepts thermocouples type J, K, T, N, R, S; Pt100 RTD, linear 4-20 mA, 0-50 mV, 0-5 Vdc.
- Sampling rate: 4 measurements per second. - Measured value resolution: 12,000 levels.
- One digital input for dry contact with 5 programmable functions.
- Remote setpoint input for 4-20 mAdc signal.
- Dual SPST 3 A / 250 Vac relays and dual SPDT 5 A / 250 Vac relays can be individually programmed for control or alarm.
- Isolated 4-20 mA output with 1500-level resolution, maximum 550 ohm load for control or PV/SV retransmission. It can also be configured for digital
input or output (10 Vdc / 20 mA).
- Auto tuning PID control. Auto/Manual mode, bumpless transfer. - Programmable Soft start up to 9999 seconds.
- Ramp and Soak: 7 programs of up to 7 segments each. Can be linked to create longer programs of up to 49 segments.
- Control output update: 250 ms.
- Up to four configurable relays, two timer alarms.
- Alarm functions: LO, HI, differential, differential LO, differential HI, sensor break and event.
- Alarm initial blocking function.
- Power: 100 to 240 Vac, 50/60 Hz; optional 24 Vdc/ac.
- Maximum consumption: 3 VA.
- 24 Vdc / 30 mA supply output for remote transmitter excitation.
- RS485 comm with Modbus RTU protocol (optional). Price Each 1 5+
- Front panel: IP65, Polycarbonate UL94 V-2. PID-030 N3000 PID Process Controller with RS485 $259.00 POA
- Back panel: IP30, ABS + PC UL94 V-0.
- Operating environment: 0 to 55 ºC, 20 to 85 % RH.
- Dimensions: 96 x 96 x 92 mm. Panel cutout: 93 x 93 mm Weight: 330 g.

Modbus-VantagePro2 Gateway Anemometer Interface Card

Our Modbus to Davis VantagePro2 The KTA-250 is an anemometer monitoring and

Weather Station Gateway allows you to alarming card. It allows the wind speed and
easily connect your PLC (Programmable direction to be measured with a Davis Instru-
Logic Controller), RTU (remote telemetry ments DS7911 Anemometer, without the need
unit) or SCADA System to a Davis Van- for the entire weather station. Monitoring of the
tage Pro2 Weather Station. Using the Modbus RTU protocol it enables wind speed and direction can be done via the
your programmable controller to monitor and carry out actions based on analog retransmission channels with 0-5V, 1-
wind speed, wind direction, temperature etc. 5V, 0-20mA or 4-20mA outputs. As well as
Features monitoring the speed and direction, 2 alarm
- Connect weather station to Gateway RS232 Com Port 1 relays can be programmed to activate at a
Baud rate 19200 certain speed or wind direction range, or combi-
- Connect the PLC to Gateway Com port 2. nation of the two. Wind speed and direction can
- PLC Connection can be RS232 or RS485. also be monitored using the Modbus protocol
- PLC Connection with either an RS232 or 2-wire RS485 connec-
selectable Modbus address 1 to 16. tion. All settings are set using the Modbus protocol and the provided
selectable baud rate 2400, 4800,9600 or 19200 software.
selectable parity none, odd, even Features
- Transfer readings – Connects to Davis Instruments DS7911 Anemometer
Outdoor Temperature, Humidity – Monitor both the wind speed and direction
Wind Speed, Wind Direction – Interface to PLC's using the Modbus protocol
Rainfall (Precipitation) – Communicate via RS232 or 2-wire RS485
Barometric Pressure – Interface to PLC's/Instruments or other controllers using 4-20mA or 0
Indoor Temperature and Humidity (console) -5V signals
Solar Radiation Evaporative Transfer – Generate relay alarms depending on the wind speed and direction
Daily, Monthly, Yearly Rainfall – Alarms can be monitored by the on board relays or via the Modbus
- Communications OK status between the weather station and gateway protocol
– DIN Rail mounting available

Price Each 1 5+ Price Each 1 5+

GWY-140 Modbus to Davis VantagePro Weather Station Card $139.00 less 10% KTA-250 Anemometer Interface Card $159.00 less 10%
GWY-141 Modbus to Davis VantagePro Card DIN Rail $159.00 less 10% KTD-250 Anemometer Interface Card DIN Rail $179.00 less 10%
ANE-001 Davis Instruments 7911 Anemometer $185.00 less 10%

Page 28 Ocean Controls Catalog 2008

 OCEAN CONTROLS - CONTROLLERS
TRIP Amplifier or Analog Monitor Card

The Dual Trip Alarm or Alarm Monitor allows you to monitor 0-20mA, 4-20mA and 0-5V analog signals analog signals. Alarm 1 has 10 different modes
of operation. Alarm 2 has 9 different modes of operation.

The Dual Alarm monitor is easily configured by a PC program via its serial port. All alarm parameters are stored into the
non volatile EEPROM memory. Configurations can be saved to your PC’s hard drive
Modes include
- High Level Alarm. A relay is switched on when the analog input level remains above a specified High Level. Relay is
switched off on returning to Low Level
- Low Level Alarm. A relay is switched on when the analog input level remains below a specified Low Level. Relay is
switched off on returning to High Level
- High Low Level Alarm. A relay is switched on when the analog input level remains above a specified High Level or
below a specified Low Level.
Can be used to on-off control of pumps, compressors, ovens etc

Price Each 1 5+
ALM-001 Trip Alarm/Alarm Monitor $79..50 POA
ALD-001 Trip Alarm/Alarm Monitor DIN Rail Mount $109..50 POA

OCEAN CONTROLS - COUNTERS & TIMERS

7 Digit LCD Counter 7 Digit LCD Timer

This self powered counter (internal bat- This self powered timer (internal battery)
tery) can count up to 9999999 and re- comes in two forms TH-7NM and the TH
tains data at least 10 years. It comes in -7NH.
two forms the CH-7N (accepts NPN sig- The TH-7NM accepts a NPN signal or
nals) and the CH-7P (accepts PNP sig- relay contact to common and counts up
nals). The maximum input signal fre- to 999999.9 minutes.
quency is 20Hz. The TH-7NH accepts a NPN signal or
It also features a reset switch on the front relay contact to common and counts up
panel to 999999.9 hours.
Both types retain data for at least 10 years.
Ambient Operating Temperature 0 to 50degC They also feature a reset switch on the front panel
Ambient Operating Humidity 35 to 85%RH Ambient Operating Temperature 0 to 50degC
Measure 45(W)x22(H)x48(D)mm Ambient Operating Humidity 35 to 85%RH
Measure 45(W)x22(H)x48(D)mm

Price Each 1 5+
Price Each 1 5+
CH-07N 7 Digit LCD Counter NPN Input $42.50 $38.25
TH-7NM 7 Digit LCD Minute Timer $42.50 $38.25
CH-07P 7 Digit LCD Counter PNP Input $42.50 $38.25
TH-7NH 7 Digit LCD Hour Timer $42.50 $38.25

Multi Function Programmable Timer

This timer from Crouzet would have to be the most flexible timer in the market. Features include
7 timing ranges - 1s - 10s - 1min - 1hr - 10hr - 100hr
10 different functions
Supply Voltage 12 - 240V AC/DC
Output - 1 Change over relay
DIN rail mountable

Price Each 1 5+
TIM-001 Crouzet Mur3 Multi Function Timer $84.00 $76.00

Page 29 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COUNTERS & TIMERS
Multi Function Programmable Timer Kit Square Wave Oscillator

This timer supports up This simple kit, based on the popular

to 7 different modes of 555 timer IC. It generates six preset
operation. It can be frequencies - 1Hz, 10Hz, 100Hz,
programmed with a 1KHz, 10KHz and 100KHz. The out-
delay time of 1 second put is selected by setting a jumper
to 2550 minutes. Can position (J1 to J6). It has a wide oper-
switch up 240VAC @ ating voltage (5-18V) and even pro-
5A. Perfect for Watch- vides visual indication (LED) of the
dog Timer applications. output. A 9V battery snap is provided
and a suitable mounting box sup-

Price Each 1 5+ Price Each 1 5+

KIT-141 As Kit $29.50 $26.55 KIT-111 As Kit $20.00 $18.00
KTA-141 Assembled Timer $45.00 $40.50 KTA-111 Assembled and Tested $30.00 $27.00

4 Digit Up Down Counter 4 Digit Presettable Down Counter

This is a low cost 4 Digit Up A low cost 4 digit presettable down

Down. As a count up counter its counter with output and reset. The
range is from 0000,1,2.. to starting count value can be set using 2
9999. It can also count down. pushbuttons. The counter can be used
Inputs include "Reset", "Count", for both high and low speed counting
"Count Direction" and applications. The counter has 4 operat-
"Disable". It also has an ing modes that control how the output
"Overflow" output for connect- behaves when the count reaches zero.
ing to another counter which
allows an 8 Digit counter to be
made.

Price Each 1 5+ Price Each 1 5+

KIT-129 As Kit $29.00 $26.10 KIT-154 As Kit $29.50 $26.55

Clear Top Bulkhead Case Dual Cyclic Timer or Pulse Generator

The 4 Digit timers and Up Down Counters can be mounted in our clear For each cyclic timer you can con-
Bulkhead Plastic case to give a budget priced sealed timer. The case figure the width of the high and low
has a clear top that allows you to view the contents of the box. portion of the pulse (0 to 9999999.9
Measures 120x70x30mm. secs) and the number of pulses (1
to 9999999). A 0 for the number of
pulses indicates endless pulses. A
led indicates when the cyclic timer
is finished. Two digital inputs con-
trol the operation of the timer. An
enable pin starts the timer. A reset
pin causes the cyclic timer pulses
to restart again .
The Dual Cyclic Timer is easily
configured by a PC program via its
serial port. All parameters are stored into EEPROM memory.

Price Each 1 5+
CYC-001 Cyclic Timer / Pulse Generator Card $79.50 POA
Price Each 1 10+
CYC-002 Cyclic Timer / Pulse Generator on DIN Rail $109.50 POA
CAS-001 $9.95 $8.95

Page 30 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COUNTERS & TIMERS
Programmable Timer Programmable 6 Digit Counter

With a 4 digit display, this timer offers a This programmable 6-digit counter is also a
relay output to be switched at pre- batch counter and totalizer, per forms
programmed intervals according to eleven quadrature counting and accepts remote re-
different timing functions. The LED display set.
shows the running time and the digital Its 2 outputs with built-in timers can be
inputs execute start, hold and reset fun- activated at any of the 3 counter presets: unit,
stions. Dimensions: 48x48mm x 100mm batch or totalizer.
(1/16 DIN). It features a special function key, full scale
adjustment and several other advanced
Features Include configuration options.
Input types:NPN/PNP, dry contact and - Input types: (2 for counting, 1 reset) type
voltage pulse. NPN/PNP, dry contact (relay, switch, etc) or voltage pulse.
Output type: 3A @ 250Vac relay or 5vdc - Max. count frequency: 50 Hz or 10 kHz.
voltage pulse. - Counter scale factor: 0.00001 to 9.99999.
Display: high efficiency10mm LED. - Counting: UP or DOWN.
Switching power supply: 12-24Vdc/ac or 85-264Vac. - F key: counter hold, counter reset, outputs reset.
Dimensions: 48x48mm x 100mm. - Outputs: 1 SPST relay and 1 pulse 5 V/25 mA output.
Up and down counting. - Output timer: 10 ms to 9999 s.
Eleven different timer modes. One mode is user defined. - Power: 100~240 Vac/dc ±10% or 24 Vdc/ac.
Three digital inputs for special functions. - Internal battery for data hold.
Frontal key to execute one pre-programmed special function. - Sensor supply output: 12 Vdc/50 mA.
Programmable time range from 0.01 second to 9999 hours. - IP65 UL94 V-2 front panel; IP20 UL94 V-0 enclosure; silicone rubber
keypad.
-Size: 48 x 48 x 110 mm.

Price Each 1 5+ Price Each 1 5+

TIM-010 Programmable Timer 240VAC $119.00 $109.00 NOV-400 Programmable 6 Digit Counter 240VAC $129.00 $116.10
TIM-011 Programmable Timer 24VDC $119.00 $109.00 NOV-400 Programmable 6 Digit Counter 24VDC $129.00 $116.10

Weekday and Weekend Timer 7 Day Digital Timer

This 7 Day Digital Timer can switch

Weekday and Weekend Timer. Has a 7
on and off up to 10 times per day.
day cycle which allows different switching
Has a 'random' function which turns
times for each day of the week, with up to
appliances on and off at non-
7 on and off settings per day. Perfect for
specified times between the hours
controlling office appliances such as the
6pm and 6am (great for when you
coffee machine or photocopier during the
are on holiday). Also features a
week.
countdown timer which may be used
to turn appliances on or off after a
specified time interval. .

Price Each 1 Price Each 1

A 0314 Weekday and Weekend Timer $19.05 TIM-020 7 Day Digital timer $22.68

Page 31 Ocean Controls Catalog 2008

 OCEAN CONTROLS - ELECTRICAL PARTS
Universal DIN Rail Terminals Our new line of DIN-Rail terminals will impress both on quality and price. If
you would like a free sample pack to inspect then email us

Type(IEC ROHS) SKJ-2.5 SKJ-4 SKJ-6 SKJ-10 SKJ-16 SKJ-35

W/T/H(mm) 42.5/5.2/46.5 42.5/6.2/46.5 42.5/8.2/46.5 42.5/10.2/46.5 42.5/12.2/50.5 50.5/15.2/61
Voltage(V) 800 800 800 800 800 1000
Current(A) 32 41 57 76 101 150
Rigid cable (mm2) 1.0-4/AWG24-12 0.2-6/AWG24-10 0.2-10/AWG24-8 0.5-16/AWG20-6 2.5-25/AWG12-4 0.75-50/AWG18-00
Soft cable (mm2) 1.0-2.5/AWG24-12 0.2-4/AWG24-10 0.2-6/AWG24-8 0.5-10/AWG20-6 4-16/AWG12-4 0.75-35/AWG18-00

Price Each 1+ 10+

TRM-007 SKJ-2.5 Universal 2.5mm Terminal $1.60 less 10%
TRM-010 SKJ-4 Universal 4mm Terminal $1.70 less 10%
TRM-013 SKJ-6 Universal 6mm Terminal $2.10 less 10%
TRM-016 SKJ-10 Universal 10mm Terminal $2.80 less 10%
TRM-019 SKJ-16 Universal 16mm Terminal $3.50 less 10%
TRM-022 SKJ-35 Universal 35mm Terminal $6.25 less 10%

Fuse and Switch DIN Rail Terminals

Type(IEC ROHS) SKJ-2.5RD SKJ-4RD SKJ-4RDX SKJ-10RD SKJ-10RD SKJ-2.5SK

W/T/H(mm) 58.5/8.0/43.5 72.5/8.2/56 72.5/8.2/56 62.4/12.2/56 62.4/12.2/56 52/6.2/46
Voltage(V) 660 660 660 660 660 400
Current(A) 6.3 6.3 6.3 10 10 16
Rigid cable (mm2) 0.2-4/AWG24-12 0.2-4/AWG24-12 0.2-4/AWG24-12 0.5-16/AWG12-4 0.5-16/AWG12-4 0.2-4/AWG24-12
Soft cable (mm2) 0.2-2.5/AWG24-12 0.2-4/AWG24-12 0.2-4/AWG24-12 0.5-16/AWG12-4 0.5-16/AWG12-4 0.2-4/AWG24-12
Fuse or Switch Fuse Fuse Fuse Fuse Fuse Switch
LED Indication No No Yes No Yes No

Price Each 1+ 10+

TRM-041 SKJ-2.5RD Fuse Terminal $3.21 less 10%
TRM-044 SKJ-4RD Fuse Terminal $3.52 less 10%
TRM-047 SKJ-4RD/X Fuse Terminal $4.74 less 10%
TRM-050 SKJ-10RD Fuse Terminal $5.19 less 10%
TRM-053 SKJ-10RD/X Fuse Terminal $6.78 less 10%

Earth DIN Rail Terminals

Type(IEC ROHS) SKJ-2.5JD SKJ-4JD SKJ-6JD SKJ-10JD

W/T/H(mm) 42.5/5.2/46 64/6.2/46.4 42.5/8.2/46 42.5/8.2/46
Torque(Nm) 0.5-0.7 0.5-0.7 1.5-1.8 1.5-1.8
Current(A)
Rigid cable(mm2) 0.2-6/AWG24-12 0.2-6/AWG24-12 0.2-10/AWG24-8 0.5-16/AWG20-6
Soft cable (mm2) 0.2-2.5/AWG24-12 0.2-4/AWG24-12 0.2-6/AWG24-8 1.5-10/AWG20-6

Price Each 1+ 10+

TRM-071 SKJ-2.5JD Earth Terminal 2.5mm $3.30 less 10%
TRM-074 SKJ-4JD Earth Terminal 4mm $3.36 less 10%
TRM-077 SKJ-6JD Earth Terminal 6mm $3.93 less 10%
TRM-091 SKJ-6JD Earth Terminal 10mm $4.11 less 10%

Page 32 Ocean Controls Catalog 2008

 OCEAN CONTROLS - ELECTRICAL PARTS
Jumpers For Terminals

Type(IEC ROHS) 10 Way Internal Jumper 10 Way External Jumper

SJK-2.5 SFB1-10-5 SEB2-10-5
SJK-4 SFB1-10-6 SEB2-10-6
SJK-6 SFB1-10-8 SEB2-10-8
SJK-10 SFB1-10-10 SEB2-10-10
SJK-16 SFB1-10-12 SEB2-10-12

Price Each 1+ 10+

TRM-092 SFB1 10-6 INTERNAL JUMPER for SJK4 $3.11 less 10%
TRM-093 SFB1 10-8 INTERNAL JUMPER for SKJ6 $3.42 less 10%
TRM-094 SFB1 10-10 INTERNAL JUMPER for SJK-10 $4.17 less 10%
TRM-095 SFB1 10-12 INTERNAL JUMPER for SJK-16 $4.88 less 10%
TRM-101 SEB 10-5 EXTERNAL JUMPER for SKJ2.5 $2.35 less 10%
TRM-102 SEB 10-6 EXTERNAL JUMPER for SKJ4 $2.96 less 10%
TRM-103 SEB 10-8 EXTERNAL JUMPER for SJK6 $3.52 less 10%
TRM-104 SEB 10-10 EXTERNAL JUMPER for SJK10 $4.49 less 10%

Accessories for Terminals

Type IEC ROHS SKJ2G/2 SKJ-B1 SKJ-G(ATP-UK) SKJ-G(DUK)

Description End Clamp Label Grouping Clap Board End Plate
Suitable for All SKJ Terminals All SJK Terminals SJK 2.5 to 16 Terminals SJK 2.5 to 16 Terminals

Price Each 1+ 10+

TRM-041 SKJ-2.5RD Fuse Terminal $3.21 less 10%
TRM-044 SKJ-4RD Fuse Terminal $3.52 less 10%
TRM-047 SKJ-4RD/X Fuse Terminal $4.74 less 10%
TRM-050 SKJ-10RD Fuse Terminal $5.19 less 10%
TRM-053 SKJ-10RD/X Fuse Terminal $6.78 less 10%

Plastic Cable Glands

IP68 CE RoHS
PG TYPE
Material: nylon plastic
Hermetic seal: nitrile rubber
Ambient temperature:
quiescent state -40degC to 100degC,
short time to 120degC
dynamic
-20degC to 80degC,
short time to100degC.
Supply color: Grey,Black, Other color please inquire

Price Each 1+ 10+

CGL-001 PG7 Grey Cable Gland $1.50 less 10%
CGL-004 PG9 Grey Cable Gland $1.60 less 10%
CGL-007 PG11 Grey Cable Gland $1.70 less 10%
CGL-010 PG13.5 Grey Cable Gland $1.80 less 10%
CGL-013 PG16 Grey Cable Gland $1.90 less 10%
CGL-016 PG19 Grey Cable Gland $2.00 less 10%
CGL-019 PG21 Grey Cable Gland $2.10 less 10%
CGL-022 PG25 Grey Cable Gland $2.30 less 10%
CGL-025 PG29 Grey Cable Gland $2.75 less 10%

Page 33 Ocean Controls Catalog 2008

 OCEAN CONTROLS - ELECTRICAL PARTS
Heatshrink Tubing

Temperature Rating 125degC

Voltage Rating 600V
Flammability VW-1
Certificated by UL. CSA.
Sizes range from 1.5 to 50mm dia
Supply color: Black,Red and Blue

Sold in 1 metre lengths

Price Each 1+ 10+

HSH-001 Black 1metre 1.5/0.75 $0.75 less 10%
HSH-002 Black 1metre 2.5/1.25 $0.90 less 10%
HSH-003 Black 1metre 3.5/1.75 $1.10 less 10%
HSH-004 Black 1metre 5.0/2.5 $1.30 less 10%
HSH-005 Black 1metre 7.0/3.5 $1.60 less 10%
HSH-006 Black 1metre 10/5.0 $2.00 less 10%
HSH-007 Black 1metre 15/7.5 $2.80 less 10%
HSH-008 Black 1metre 20/10 $3.10 less 10%
HSH-009 Black 1metre 25/12.5 $3.90 less 10%
HSH-010 Black 1metre 30/15 $4.80 less 10%
HSH-011 Black 1metre 40/20 $6.10 less 10%
HSH-012 Black 1metre 50/25 $7.50 less 10%
HSH-021 Red 1metre 1.5/0.75 $0.75 less 10%
HSH-022 Red 1metre 2.5/1.25 $0.90 less 10%
HSH-023 Red 1metre 3.5/1.75 $1.10 less 10%
HSH-024 Red 1metre 5.0/2.5 $1.30 less 10%
HSH-025 Red 1metre 7.0/3.5 $1.60 less 10%
HSH-026 Red 1metre 10/5.0 $2.00 less 10%
HSH-027 Red 1metre 15/7.5 $2.80 less 10%
HSH-028 Red 1metre 20/10 $3.10 less 10%
HSH-029 Red 1metre 25/12.5 $3.90 less 10%
HSH-030 Red 1metre 30/15 $4.80 less 10%
HSH-031 Red 1metre 40/20 $6.10 less 10%
HSH-032 Red 1metre 50/25 $7.50 less 10%
HSH-041 Blue 1metre 1.5/0.75 $0.75 less 10%
HSH-042 Blue 1metre 2.5/1.25 $0.90 less 10%
HSH-043 Blue 1metre 3.5/1.75 $1.10 less 10%
HSH-044 Blue 1metre 5.0/2.5 $1.30 less 10%
HSH-045 Blue 1metre 7.0/3.5 $1.60 less 10%
HSH-046 Blue 1metre 10/5.0 $2.00 less 10%
HSH-047 Blue 1metre 15/7.5 $2.80 less 10%
HSH-048 Blue 1metre 20/10 $3.10 less 10%
HSH-049 Blue 1metre 25/12.5 $3.90 less 10%
HSH-050 Blue 1metre 30/15 $4.80 less 10%
HSH-051 Blue 1metre 40/20 $6.10 less 10%
HSH-052 Blue 1metre 50/25 $7.50 less 10%

Page 34 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MICROCONTROLLER PROGRAMMERS
KT5149 USB/Serial Port PIC Programmer NEW—Firmware and PC Software for KT5149 and KT5150 allows
you to program pretty much all the PIC10, PIC12, PIC14,
This PIC programmer not only connects via a USB port but can also be PIC16, PIC18 and dsPIC families.
used via a serial port at the flick of a switch. This is the latest release
(version C) of the popular PIC programmer featured in Silicon Chip, April 2003. It adds ICSP programming capability. It uses the latest FT232BM
USB chip. A windows program is free with the program. The programmer also supports some serial EEPROMs. ZIF socket is not supplied, see
below for ZIF socket and USB A Male to B Male cable prices
ALL SOFTWARE AND DOCUMENTATION CAN BE DOWNLOADED FROM OUR WEB-
SITE
Some of the PICs and EEPROMs supported: 12C508 12C508A 12C509 12C509A 12C671 12C672
12CE673 12CE674 12F629 12F675 16C505 16C554 16C558 16C61 16C62 16C620 16C62A
16C621A 16C62B 16C620A 16C621 16C622 16C622A 16C63 16C63A 16C64 16C64A 16C65
16C65A 16C65B 16C66 16C66A 16C67 16C71 16C71A 16C710 16C711 16C712 16C716 16C72
16C72A 16C73 16C73A 16C73B 16C74 16C74A 16C74B 16C745 16C765 16C77 16C773 16C774
16C83 16C84 16F627 16F627A 16F628 16F628A 16F630 16F676 16F684 16F688 16F73 16F737
16F74 16F747 16F76 16F767 16F77 16F777 16F818 16F83 16F84 16F84A 16F648A 16F630
16F676 16F77 16F819 16F87 16F870 16F871 16F872 16F873 16F873A 16F874 16F874A 16F876
16F876A 16F877 16F877A 16F88 18F1220 18F1320 18F2320 18F242 18F248 18F252 18F258
18F442 18F448 18F452 18F458 18F2220 18F2320 18F4220 18F4320 24LC256 24LC512 & others.

Price Each 1
KIT-149 As Kit $69.00 KT5150 USB PIC Programmer
KTA-149 Assembled And Tested $95.00
USB-002 USB A Male to A Male Cable $9.00 This PIC Programmer is basically a surface
ZIF-040 ZIF Socket $18.00 mount version of K149E with no serial port.
PLP-005 12VDC Plug Pack $14.50 Supports same PICs as K149. Uses standard
USB Type A Male - B Male cable.

Differences between K150 and K149:

All Flash PIC Programmer

The latest USB port all-Flash PIC ALL SOFTWARE AND DOCUMENTATION
Programmer. Only programs flash CAN BE DOWNLOADED FROM OUR WEB-
chips ie 16F, 18F series etc Minimum SITE
construction needed because it con-
sists of mostly surface mounted com-
ponents already installed. No external NOTE: A USB A Male to B Male cable is
power supply needed. Power is drawn needed to connect to a USB port on a PC. A 16 to 18 VDC power supply
from the computers USB port. Only is required to power it. A 12VDC Non Regulated Plug pack can be used
the bi-LED pokes up above the box. to power it
40-pin wide-slot ZIF socket sup-
plied. It uses a USB 'A' type extension
cable, A-A to connect to the PC.
Price Each 1
Price Each 1 KTA-150 USB PIC Programmer Assembled with ZIF Socket $95.00
KIT-128 All Flash Programmer As Kit $95.00 USB-002 USB A Male to B Male Cable $9.00
USB-002 USB A Male to A Male Cable $9.00 PLP-005 12VDC Plug Pack $14.50

USB Flash ICSP Programmer

Atmel AVR Programmer
The KT-5182 is a KT-5128 without the This versatile programmer can
ZIF socket. It is a Flash ICSP PIC Pro- program 20-pin DIP - 90S1200,
grammer operating from the USB port. It 90S2313, and 40-pin DIP -
is fully assembled as most of the com- 90S4414, 90S8515. Connecting to
ponents are surface mount. The board is the serial port of the PC it pro-
only 48 x 30mm. There are 4 nylon grams the controller in parallel
10mm standoffs to protect the under- mode. With the optional adaptor
side. USB 'B' female connector. It pro- board you can now program
grams most Flash PIC uCs (devices with an F in the part number). AT90S4434 and AT90S8535.
Please note it will not program the
8-pin AVR devices (90S2323,
Price Each 1 90S2343). Terminal program sup-
KTA-182 All Flash ICSP Programmer $69.00 plied. ZIF sockets are not supplied. See Below
USB-002 USB A Male to B Male Cable $9.00
Price Each 1 5+
KIT-122 As Kit $48.50 $43.65
KTA-122 Assembled and Tested $60.00 $54.00

Page 35 Ocean Controls Catalog 2008

 OCEAN CONTROLS - COMPONENTS
Low Profile Crystals Programmer Cables and ZIF Sockets

Price Each 1
ZIF-040 ZIF Socket $18.00
USB-001 USB A Male to A Male Cable $9.00
Price Each 1 5+ USB-002 USB A Male to B Male Cable $9.00
CRY-001 32.768kHz QSC38 $3.50 $3.20 CAB-002 DB9 Male to Female Cable $7.00
CRY-004 8.0000MHz HC49S $3.50 $3.20 12VDC Unregulated Plug Pack $14.50
CRY-006 16.0000MHz HC49S $3.50 $3.20
CRY-008 20.0000MHz HC49S $3.50 $3.20

PIC Micrcontrollers
Atmel AVR Micrcontrollers

Price Each 1 5+
Price Each 1 5+ PIC-001 PIC12C508A-04 $4.20 $3.75
ATL-001 AT89C2051-24-PC $4.95 $4.45 PIC-002 PIC12C509A-04 $4.50 $3.95
ATL-002 ATTiny2313-10-PC 20MHz 2kb 8-bit $12.95 $11.35 PIC-005 PIC16F84A-20P $9.95 $8.75
ATL-003 ATmega168-20PC 20MHz 16kb 8-bit Micro $15.00 $13.50 PIC-006 PIC16F88 $12.95 $11.35
ATL-004 ATmega162-16PU 16MHz 16kb 8-bit Micro $19.00 $17.75 PIC-007 PIC16F628A-20/P $9.95 $8.75
ATL-005 ATmega32-16PI 16MHz 32kb 8-bit Micro $24.00 $21.50 PIC-008 PIC16F877A $12.95 $11.35
PIC-010 PIC18F2550 USB 28pin microcontroller $14.95 $13.45

Peripheral IC’s DIN Rail PCB Mounting Sections

Easily mount 72mm or 107mm

wide PCBs on DIN rail, the total
PCB length that can be accommo-
Price Each 1 5+ dated can be calculated by totalling
ICS-001 MAX232 RS232 Transceiver $5.60 $5.04 up the total length of the base sec-
ICS-002 LTC485 RS485 Transceiver IC $4.25 $3.83 tions and adding 10mm for each
ICS-010 L297 Motor Controller IC $7.95 $7.15 end cap. Two mounting clips will be
ICS-011 L298 Stepper Motor Controller IC $8.25 $7.43 required to attach the section to the
ICS-020 LM7805 5Volt Regulator $1.10 $0.99 DIN rail.
ICS-021 LM7812 12Volt Regulator $1.10 $0.99 For example:2 x 44.8mm bases
ICS-022 LM7833 3.3Volt 500mA Regulator $1.50 $1.35 and 1x 11.2mm section + 2 end-
ICS-031 ULN2003 7 Darlington Array $3.20 $2.88 caps = 44.8 +44.8+ 11.2 +10 +10 =
ICS-032 ULN2803 8 Darlington Array $4.05 $3.83 120.8mm.

DIN Rail Mounting Sections 72mm

Price Each 1 10+

DRM-001 Base Mounting Clip $1.77 $1.59
DRM-002 End Cap $2.14 $1.95
DRM-003 Base Sections 11.2mm length $2.86 $2.59
DRM-004 Base Sections 22.4mm length $3.59 $3.23
DRM-005 Base Sections 44.8mm length $4.32 $3.86

DIN Rail Mounting Sections 107mm

Price Each 1 10+

DRM-011 Base Mounting Clip $2.14 $1.95
DRM-012 End cap $2.50 $2.23
DRM-013 Base Sections 11.2mm length $3.18 $2.91
DRM-014 Base Sections 22.4mm length $3.91 $3.55
DRM-015 Base Sections 44.8mm length $4.91 $4.45

Page 36 Ocean Controls Catalog 2008

 OCEAN CONTROLS - ROBOTICS & MOTOR CONTROLLERS
SMC-200 DMC5400 Advanced 4-axis Stepping & Servo
Motion Control Card

The DMC5400 is an advanced 4-axis motion control card for step-

ping and digital servo control application. Compared with the
DMC1000 and DMC3400 series, DMC5400 offers better linear and
circular interpolation capability and continuous contouring perform-
ance for advanced pulse output
motion control solutions.
Features
32-bit PCI bus, Rev. 2.2, 33MHz
Pulse output r rate up to 5MHz
6 Pulse/dir output modes: Pulse /DIR, CW/CCW etc
2~4 axes linear interpolation
2 axes circular interpolation
Multi-axis continuous interpolation
Position/speed change on-the-fly
13 home return modes and auto home search
4 axes incremental encoders input with 28-bit up/down counter
Hardware position compare and trigger with auto-loading FIFO
High speed position latch function
32 General-Purposed I/O
Manual pulser input interface
Programmable acceleration and deceleration time
Trapezoidal and S-curve velocity profiles
Multi-axis, simultaneous start/stop
Programmable interrupt sources
Price Each 1
Supports up to 5 cards in one system (20 axes)
SMC-200 DMC5400 Multi Axis Controller $1149.00
Hardware backlash compensator
SMC-201 TB60 Cable and Terminal Board $159.00
Software limit function
Easy interface to any stepping and digital servo SMC-202 TB50 Cable and Terminal Board $159.00

Pololu Low Voltage Dual Serial Motor Controller Pololu's Micro Dual Serial Motor Controller

This low-voltage dual serial

Pololu's popular micro motor con-
motor controller (DSMC) is de-
troller will get your robot running in
signed specifically for high-
a snap. The tiny module can indi-
performance, low-voltage toy
vidually control two motors, and
motors that run on 1.5 - 6 V.
you can daisy-chain multiple units
Serially controlled it uses PWM
to control up to 62 motors with one
to control the motor speed
serial line. The new version pro-
Specifications:
vides up to 2 A to a single motor,
PCB size: 25 x 22.5mm, Motor ports: 2
or 1 A each to two motors. The
Speeds: 127 forward and backward, brake
motor supply can be as low as 2 V, making the unit a perfect
Max current: two motors 5 A each, one motor 10 A
match for small DC motors. Using one serial output from your
Motor voltage: 0 - 7 V
microcontroller, you can independently set each motor to go
Logic voltage: 3 - 5.5 V
forward or backward at any of 127 speeds, coast, and with the
PWM frequency: two motors 600 Hz, one motor 750 Hz
new version, brake.
Serial baud rate: 1200 - 192000 (automatically detected)

Price Each 1 5+ Price Each 1 5+

POL-120 Low Voltage Dual Serial Motor Controller $53.50 $48.15 POL-411 Micro Dual Serial Motor Controller $36.95 $33.25

Pololu 3-Amp motor Controller

The 3-Amp motor controller with multiple interface and feedback options simplifies servo
control of commonly available DC motors. The module features three independent inter-
faces: a serial protocol for microcontroller-based applications, a pulse-width interface for
connection to hobby radio control equipment or serial servo controllers, and an analog volt-
age interface for simple tests and demonstrations. Two feedback alternatives allows for
closed-loop control of position or speed. The motor controller measures 36 x 36mm and has
an operating voltage of 6–18 volts. The serial protocol is compatible with other Pololu motion
control devices, allowing multiple units to be connected to a single serial line to control a
mixture of motors sizes and hobby RC servos.
Price Each 1 5+
POL-392 3 Amp Motor Controller $64.30 $57.85

Page 37 Ocean Controls Catalog 2008

 OCEAN CONTROLS - ROBOTICS & MOTOR CONTROLLERS
Pololu TReX Dual High Power Motor Driver Pololu Hi Current Motor Controller
The Pololu high-
The TReX can control two bidirectional power motor drivers
and one unidirectional motor via three are compact carriers
independent control interfaces: radio for the VNH3SP30
control (RC) servo pulses, analog volt-
and VNH2SP30 mo-
age, and asynchronous serial (RS-232
tor driver integrated
or TTL). It uses five input channels to
receive the RC or analog control sig- circuits from ST. All
nals. When operating in RC or analog you need to add is a
mode, the five channels function as microcontroller or
follows: other control circuit
to turn the H-Bridge
* Channel 1: motor 1 speed and direction or, if in mix mode, turn left/right on and off. The mo-
* Channel 2: motor 2 speed and direction or, if in mix mode, go forward/ tor drivers have a maximum current rating of 30 A continuous.
reverse The actual current you can deliver depends on how well you
* Channel 3: auxiliary (unidirectional) motor speed can keep the motor driver cool. In our tests, we were able to
* Channel 4: can be used to enable "flipped mode", which allows invert- deliver short durations (on the order of milliseconds) of 30 A
able robots to be controlled as normal when they are inverted and a few seconds of 20 A without overheating. At 6 A, the
* Channel 5: determines whether the motors are controlled by the chan- chip gets just barely noticeably warm.
nel inputs or the serial interface; this channel allows you to switch between
autonomous and human control at will . Price Each 1 5+
POL-705 30 Amp Motor Driver with VNH3SP30 $39.65 $35.69
Price Each 1 5+ POL-706 30 Amp Motor Driver with VNH2SP30 $47.60 $42.85
POL-777 TReX Dual Motor Controller $124.50 $112.05

Pololu Dual Hi Current Motor Controller

The Pololu dual high-power motor drivers are compact carriers for the VNH3SP30 and
VNH2SP30 motor driver IC’s. The board incorporates most of the components of the typical
VNH2SP30 application including pull-up and current-limiting resistors and a FET for reverse
battery protection. (The current sense circuit is populated on both versions of the board,
but only the VNH2SP30 supports current sense.) To keep the number of I/O lines down, the
two enable/diagnostic lines on each chip are tied together. All you need to add is a micro-
controller or other control circuit to turn the H-Bridges on and off.
In a typical application, the power connections are made on one end of the board, and the
control connections are made on the other end. +5 volts must be supplied to the board;
the input voltage is available at those pins as well, but the connection is not intended for
currents exceeding a few amps. The diagnostic pins can be left disconnected if you do not want to monitor the
fault conditions of the motor drivers. INA and INB control the direc-
tion of each motor, and the PWM pins turns the motors on or off. For Price Each 1 5+
the VNH2SP30 version, the current sense (CS) pins will output ap- POL-707 Dual Motor Driver with VNH3SP30 $64.95 $58.45
proximately 0.13 volts per amp of output current. POL-708 Dual Motor Driver with VNH2SP30 $77.95 $70.15

Pololu High Power Motor Controller with Feedback Micro Serial Servo Controller

The SMC04 high-

The Pololu micro serial servo
power motor con-
controller is a very compact
troller with feedback
solution for controlling up to
has multiple inter-
eight radio control (RC) servos
face and feedback
from a computer or microcon-
options that simplify
troller. The controller meas-
servo control of
ures just 23 x 23mm, yet it is
commonly available
one of the most full-featured
DC motors. The
servo controllers available.
module features
Each servo speed and range
three independent interfaces: a serial protocol for microcon-
can be controlled independ-
troller-based applications, a pulse-width interface for connec-
ently, the baud rate is detected automatically over a 1200-
tion to hobby radio control equipment or serial servo control-
38400 bps range, and multiple units can be daisy-chained on
lers, and an analog voltage interface for simple tests and dem-
one serial line to control up to 128 servos. Three status LEDs
onstrations. Two feedback alternatives allows for closed-loop
and an integrated level converter for RS-232 applications get
control of position or speed. The SMC04 is higher-current ver-
you up and running quickly. The micro serial servo controller is
sion of our 3-A motor controller with feedback that can handle
dwarfed by even a standard servo, but it can control any stan-
larger motors with its VNH3SP30 motor driver chip.
dard RC servos, including giant 1/4-scale servos.

Price Each 1 5+ Price Each 1 5+

POL-425 Hi Power Motor Controller with Feedback $123.80 $111.40 POL-207 Micro Serial Servo Controller $29.75 $26.80

Page 38 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MOTOR CONTROLLERS
Pololu's Serial 8 Servo Motor Controller DC Servo Motor Controller

The Pololu serial 8-servo controller allows This PIC Servo Motor Driver can
you to control up to eight RC servos with simultaneously drive up to four
almost any robot controller or computer. servo motors using potentiome-
The interface to the servo controller is a ters as positioning controllers.
standard RS-232 serial port or a TTL-level Each motor is positioned by rotat-
serial line, using any baud rate between ing a potentiometer which is con-
1200 and 38400 baud. Multiple 8-servo nected to the input of the micro-
controller.
controllers can be connected to a single
You need one potentiometer per
serial line to control up to 128 servos inde-
motor. The PIC Servo Motor
pendently. The servo controller is compati- Driver uses a PIC16C71. All the
ble with all of our serial motor controllers work is done in the micro-controller. Full source code supplied. Servo-
and servo controllers. The servo controller motors & potentiometers not supplied.
is also compatible with the Scott Edwards Power Supply Required: 5V DC/1A. PCB: 75 x 50mm.
MiniSSC II servo controller and any soft-
ware written for it.
Price Each 1 5+
Price Each 1 5+ KIT-102 As Kit $29.50 $26.50
POL-727 Serial 8 Servo Motor Controller $38.10 $34.30 KTA-102 Assembled and Tested $39.50 $35.50

Pololu's USB 16 Servo Controller

8 Servo Motor Controller

The Pololu USB 16-servo controller is Our 8 RC Servo Motor Con-

the latest addition to our line of R/C troller can be configured to
hobby servo controllers. The compact control 4 RC servo motors by
module measures just 1.9"x1.0" in- switches (motor moves to two
cluding the USB connector, making it different positions based on a
smaller than most 8-channel control- switch) and 4 servos via
lers, and it offers both USB and asyn- RS232 ASCII serial com-
chronous serial (UART) connectivity.
mands. Being able to control
No features are compromised for the
the position of the servos by
small size, as our USB controller
supports independent speed and a switch allows a servo motor
range settings for each servo while to be used easily in open - closed situations such as road or
delivering 0.5-microsecond resolution door barriers. It is perfect for use with model trains, hobby
for smooth output across its broad output pulse range of 250 through models, robotics and industrial production.
2750 microseconds. . The card can easily be configured to have all 8 servos con-
trolled serially. Up to 4 boards can be operated off the one
PC serial port allowing up to 32 motors to be controlled.

Price Each 1 5+ Price Each 1 5+

POL-390 USB 16 Servo Controller $103.25 $92.95 KTA-199 8 Servo Motor Controller assembled $55.00 $49.50
USB-003 USB 2.0 Plug A to 5 Pin Mini B Cable $9.05 $8.15

Pololu's Orangutan Controller

Pololu's Round Robot Chassis

The Orangutan robot controller is a

complete control solution for small ro- This circular laser-cut plastic robot
bots. Orangutan includes an 8- chassis makes a great base for
character x 2-line liquid crystal display, small mobile robots. With a diame-
two bi-directional motor ports, a buzzer, ter of only five inches (slightly big-
three pushbuttons, and up to 12 user I/ ger than a CD), this acrylic chassis
O lines, yet the compact module meas- is ideal for building sturdy robots
ures only 2.00" x 1.85" and weighs less capable of navigating tight spaces.
than 1 ounce. Because of the complete As shown below, the circular chas-
feature set, very few additional compo- sis has many holes and slots for
nents (such as sensors or motors) need mounting sensors, motors, and
to be added to complete the electronic portion of a small robot.
other hardware.
Orangutan is based on the Atmel MEGA168 microcontroller, which
features 16 Kbytes of flash program memory, 1024 bytes of SRAM,
and 512 bytes of EEPROM. Up to 8 channels of 10-bit analog-to- To complete the round robot chas-
digital conversion is also available. Because the user has direct ac- sis, the kit includes a Tamiya twin-
cess to the microcontroller, any development software for Atmel's motor gearbox, ball caster, and
AVR microcontrollers, including Atmel's free AVR Studio and the GCC truck tires; .
C compiler, is compatible with Orangutan. An in-circuit programmer
such as Atmel's affordable AVR ISP is required for programming Price Each 1 5+
POL-250 Robot Chassis with gearbox motor and tyres $41.60 $37.45
Price Each 1 5+
POL-225 Orangutan Controller $75.45 $67.90

Page 39 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MOTOR CONTROLLERS
DC Motor PID Speed Controller Hi Current DC Motor Speed Controller

Our new kit provides feedback control of This DC motor controller uses PWM Pulse
DC Motors. It can operate in Closed Width Modulation to control the speed of a
Loop PID mode allowing accurate speed DC motor. A potentiometer can be used to
control over different loads or in Open set the speed or a 0 to 5VDC signal can be
Loop PWM mode. supplied.
Target Speed and PID settings can be With this kit you can control the speed of a
set via the 3 Pushbuttons and LCD, the common DC motor rated up to 55V (20A)
Serial Port or Analog Input without sacrificing motor torque. Operates
(potentiometer). Serial Port control al- on a supply voltage of 8V to 26V.
lows you to control a number of control- Uses a microcontroller to pulse-width
lers from the one serial port on your PC. modulate two high current power IRFZ44
With this kit you can control the speed of MOSFETs to provide high torque DC Motor Speed Control.
a common DC motor rated up to 55V This controller is suitable for controlling Golf Buggy DC Motors. A
(20A) without sacrificing motor customer recently said this was the best controller he had used with his
torque. Operates on a supply voltage of 8V to 26V. Golf Buggy Motor.
It uses a microcontroller to pulse-width modulate two high current power
IRFZ44 MOSFETs to provide high torque DC Motor Speed Control. Finished Dimensions (mm): 100Wx100Lx40H. .
Feedback is achieved with a Photo-Interrupter Pulse (Provided). Price Each 1 5+
Finished Dimensions (mm): 100Wx100Lx40H.
KTA-195 Hi Current DC Motor Controller $79.00 $71.10

Price Each 1 5+
KTA-194 DC Motor PID Speed Controller $105.00 $94.50
DC Motor Speed Controller

Serial Hi Current DC Motor Speed Controller With this kit control the speed of
any common DC motor rated up
The operation of this 20A DC Motor to 100V (5A) without sacrificing
Speed Controller is configured using a motor torque. Operates on a sup-
serial port of a PC. It has 4 different ply voltage of 5V to 15V.
modes of operation. Uses NE556 to pulse-width modu-
late a high current power MOS-
Mode 1 - Speed is set by ASCII com- FET, IRFZ44.
mands received from a serial RS232 In this way motor torque is main-
connection. Up to 4 Speed Controllers tained. Adjustable speed control.
can be addressed and controlled from a Box mounted. Finished Dimensions (mm): 60Wx100Lx30H.
single PC or microcontroller serial port.
Mode 2 - 4 selectable speeds can be Price Each 1 5+
chosen using a 4 position rotary switch KIT-067 As Kit $24.00 $21.00
Mode 3 - Motor speed is controlled by a 1-2mS RC Pulse. KTA-067 Assembled and Tested $40.00 $36.00
Mode 4 - Motor speed is controlled by a PWM pulse stream received
from a PLC or microcontroller

With this kit you can control the speed of a common DC motor rated up
to 55V (20A) without sacrificing motor torque. The controller logic oper-
ates on a supply voltage of 8V to 26V. It uses a microcontroller to pulse-
width modulate two high current power IRFZ44 MOSFETs to provide
high torque DC Motor Speed Control.
PWM Frequencies of 9.7KHz, 1.2KHz, 152Hz and 38Hz can be selected
using a serial command.

A straight through D9 Male to Female serial cable is required to config-

ure and communicate with the controller via a PC. The PC software
supplied is a Visual Basic program with source code provided for you to
be able to write your own programs to control the motor from your PC.

Price Each 1 5+
KTA-207 Serial Hi Current DC Motor Controller $89.00 $80.10

Page 40 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MOTOR CONTROLLERS
Dual Bidirectional DC Motor Speed Controller Bidirectional DC Motor Speed Controller

This DC motor controller allows you to This kit controls the speed of a DC
control the speed of two DC motors inde- motor in both the forward and re-
pendently. Each motor can be operated verse direction using pulse width
in unidirectional mode with a 0-5V input modulation PWM. The range of
giving 0-100% PWM and a digital input control is from fully OFF to fully ON
for direction selection, or in bidirectional in both directions.
mode where the analog input is responsi- The maximum voltage available to
ble for direction and speed selection. run the motor is 32VDC.
A link allows you to control the speed Current: 5A. This can be increased
from a 0-20mA or 4-20mA signal. A serial by soldering wire links between
command allows you to set the PWM frequency to 10KHz, 1.25KHz or terminals and MOSFETS.
156Hz to suit your application.
Finished Dimensions 75x105x20mm .
Price Each 1 5+
Price Each 1 5+ KIT-166 As Kit $30.00 $27.00
KTA-198 Dual Bidirectional DC Motor Controller $79.00 $71.10 KTA-166 Assembled and Tested $44.00 $39.60

Modbus Programmable Stepper Motor Controller KTA-190 Serial Stepper Motor Controller

The introduction of a more pow- Connects to the PC serial port and

erful microcontroller has allowed provides an easy to use interface
us to produce a standalone 4 for connecting and controlling step-
axis stepper motor controller per motors by your PC. You can
which can be programmed via a connect up to four KT5158 Bipolar
PC using supplied software or Stepper Motor Drivers (See Below)
alternatively controlled via a or KT5179 Unipolar Stepper Motor
PLC to free the PLC from com- Drivers to the card using their step
plex stepper motor control rou- and direction signals. You can
tines. Up to 4 cards can be con- multidrop up to 4 interface cards off
trolled from a PLC using the the 1 RS232 serial line so you can control up to a total of 16 stepper
Modbus protocol. motors.
Up to 120 instructions can be programmed into the controller (1 motor, 50
instructions for 4 motors) and retained through power loss. Just program Simple ACSII commands are sent to the card to control each of the
once and then let it go. stepper motors
Ideal for repetitive process tasks involving stepper motors, the unit can @01 AMOV 2000 move stepper motor 1 to position 2000
also be configured with up to 6 simple digital outputs (when the outputs Allows acceleration and deceleration of the motors and limit switches
are not being used for motor control) and 4 digital inputs which can be can be connected to the card
used for limit switches or program control.
Price Each 1 5+ Price Each 1 5+
KTA-193 Modbus Programmable Stepper Controller $119.00 $107.10 KTA-190 Serial Stepper Motor Controller $65.00 $59.00

Page 41 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MOTOR CONTROLLERS
KTA-192 Parallel Port Interface Card KTA-205 Parallel Port Interface Card with Relays

Our Parallel Port Relay card allows Our Parallel Port Relay card allows you to
you to control stepper motor opera- control stepper motor operations from your
tions from your parallel port. It uses a parallel port. It uses a 74HC245 buffer IC to
74HC245 buffer IC to provide protec- provide protection for your PC’s parallel port
tion for your PC’s parallel port and and enough current drive for turning on and
provide enough current drive for off opto-isolator inputs. Can be connected to
turning on and off opto-isolator in- our stepper motor driver cards and Microstep-
puts. Can be connected to our KTA- ping drives. The card provides 8 motor control
191, KTA-196 and KTA-179 stepper output signals ( 4 Step signals, 4 Direction
motor driver cards and Microstepping drives. Fitted with screw terminals it signals) to control up to 4 Stepper Motor Driv-
allows for 4 Clock signals, 4 Direction Signals and 4 Limit or Emergency ers, 4 digital inputs designed for use as limit switch inputs, 2 Relay Out-
Switches Terminals. Perfect for a 3 axis or 4 axis CNC machine. Pin outs puts to control spindles, coolant or vacuums, and 3 general IO which are
are suitable for most desk top CNC packages. connected directly to the port. The card is available with 12V or 24V relays
and requires power at the relay voltage. . Perfect for a 3 axis or 4 axis
CNC machine. Pin outs are suitable for most desk top CNC packages.

Price Each 1 5+
Price Each 1 5+ KTA-205 Parallel Port Interface with 12V Relays $45.00 $40.50
KTA-192 Parallel Port Interface Card $35.00 $31.50 KTA-206 Parallel Port Interface with 24V Relays $45.00 $40.50

M415 Microstepping Bipolar Stepper Driver

M325 Microstepping Bipolar Stepper Driver The M415B is a very small size high performance
microstepping driver. It is suitable for driving any 2-
The M325 is a high performance mi-
phase and 4-phase hybrid stepping motors. By
crostepping driver. It is suitable for driving using advanced bipolar constant-current chopping
any 2-phase and 4-phase hybrid stepping technique, it can output more speed and power
motors. By using advanced bipolar con-
from the same motor, compared with traditional
stant-current chopping technique, it can technologies such as L/R drivers. Features
output more speed and power from the - High Performance Low Cost
same motor, compared with traditional
- Supply voltage 18 to +36VDC
technologies such as L/R drivers. Features - output current adjustable from 0.1A to 1.5A
- Supply voltage 12 to +24VDC - Inaudible 20khz chopping frequency
- Adjustable peak current 0.39 to 2.5A
- TTL compatible and optically isolated input signals
- The current reduction switches in on - Automatic idle-current reduction
absence of clock pulses - Mixed-decay current control for less motor heating
- Suitable for 2-phase and 4-phase stepping motors
- 7 selectable resolutions (1,2, 4, 8, 16, 32, 64)
- Optically isolated input signals - Microstep resolution can be changed on the fly (optional)
- Pulse frequency up to 100 KHz - Suitable for 2-phase and 4-phase stepping motors
- Selectable microstep resolutions 1,2,4 and 8
- Reverse polarity protection
- Small size (86x55x20.5mm)
Price Each 1 5+
Price Each 1 5+ SMC-006 M415 Microstepping Stepper Motor Controller $109.00 $98.10
SMC-002 M325 Microstepping Stepper Motor Controller $99.00 $89.00

ND556 Microstepping Bipolar Stepper Driver

M542 Microstepping Bipolar Stepper Driver The ND556 is a high performance microstep-
ping driver using pure-sinusoidal wave current
The M542 is a high performance microstepping control technology, it is particularly suitable for
driver. It is suitable for driving any 2-phase and applications which require extremely low noise
4-phase hybrid stepping motors. By using ad- and low heating. The ND556 is suitable for a
vanced bipolar constant-current chopping tech- wide range of stepping motors of NEMA 17,
nique, it can output more speed and power from
the same motor, compared with traditional tech- 23 and 34 size
nologies such as L/R drivers. Features Features include
- Supply voltage +20 to +45VDC, - Patented technology
- Adjustable peak current 0.54 to 4.2A - Pure-sinusoidal precise current control tech-
- The current reduction switches in on absence nology
of clock pulses - Extreme low motor noise
- Suitable for 2-phase and 4-phase stepping - Both driver and motor low heating
motors - High performance, low cost
- Optically isolated input signals - Supply voltage +20 to +45VDC, Adjustable peak current 1.4 to 5.6A
- Pulse frequency up to 400 KHz - The current semi-reduction automatically switches in on absence of
- 15 selectable resolutions up to 25000 steps/rev clock pulses
- Short-circuit, over-voltage, short-voltage protection - Suitable for 4,6,8 lead motors
- Small size (118x75.5x33mm) - Optically isolated input signals
- Pulse frequency up to 400 KHz
Price Each 1 5+ Price Each 1 5+
SMC-003 M542 Microstepping Stepper Motor Controller $149.00 $134.00 SMC-004 ND556 Microstepping Stepper Motor Controller $179.00 $161.00

Page 42 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MOTOR CONTROLLERS
MD882 Microstepping Bipolar Stepper Driver KTA-191 Bipolar Chopper Stepper Motor Driver Kit

The MD882 is a high performance mi- Our new bipolar chopper drive allows you to get better performance from
crostepping driver using pure-sinusoidal your stepper motor.
wave current control technology. It is par- It uses a dual full bridge motor driver based
ticularly suitable for applications desired on the L297 & L298. Motor current for each
with extremely low noise and low heating. phase is set using an on-board potentiome-
Tthe pure-sinusoidal precise current con- ter and the controller is capable of handling
trol technology (domestic patented technol- motor winding currents up to 2 Amps per
ogy) ensures long motor life and high phase.
torque and the operating effect of the step- It operates from a DC supply voltage of 9-
ping motor is somehow inclined to that of 36V. The drive provides all basic motor
servo motor. controls, including full or half stepping of
Features bipolar steppers and direction control.
- Pure-sinusoidal precise current control technology Works with our range of large bipolar step-
- Supply voltage up to +75VDC per motors
- Peak current to 8.2A (RMS5.86A) Signals (Step, Direction, Enable) can be interfaced to external logic or a
- Optically isolated differential input pulse frequency up to 300 KHz microcontroller. Can easily control the motor from your computer's paral-
- Automatic idle-current reduction lel port or our serial stepper controller card!
- Suitable for 2-phase and 4-phase stepper motors Finished Dimensions (mm): 88Wx105Lx35H
- 16 selectable resolutions up to 10000 steps/rev
- DIP switch current setting with 8 different values Price Each 1 5+
KTA-191 Bipolar Motor Chopper Drive Assembled $75.00 $67.50
Price Each 1 5+
SMC-005 MD882 Microstepping Stepper Motor Controller $225.00 $202.50

KTA-197 Serial Bipolar Stepper Motor Controller

KTA-196 Bipolar Stepper Motor driver
The KT-5197 is a combination of our
Simple circuit to drive 4 wire (and 6 or 8
popular KT5190 Serial Stepper Controller
wire) bipolar stepper motors at up to 8
and the KT-5196 Bipolar Stepper Motor
amps. The card features
Driver.
- a double sided PCB - screw Terminals
It has all the features of the KT-5196
for all inputs, power and motor connec-
including full and half stepping and en-
tions.
able input.
- Full and Half Step (less resonance prob-
You simply write ASCII commands
lems) and microstepping of 4,8,16,32,64
through the PC's serial port to the card to
and 128 operation
control the stepper motor
- Step and Direction Inputs.
@01 AMOV 2000 move stepper motor 1 to position 2000
- an enable input which will remove all power to the motor
Up to 4 of these cards can be controlled from a serial port.
Supply Required: 8-30V DC
We tested the KT5196 against a K158 and found an increase of 33% in
Dimensions 75x105x20mm .
stepping rate performance.

Dimensions 75x105x20mm . Price Each 1 5+

KTA-197 Assembled and Tested $95.00 $85.50
Price Each 1 5+
KTA-196 Assembled and Tested $65.00 $58.50

EasyDrive Bipolar Stepper

KTA-206 Serial Unipolar Stepper Motor EasyDriver v3 is a simple to use

bipolar stepper motor driver,
The KT-5206 is a combination of our popu- compatible with anything that can
lar KT5190 Serial Stepper Controller and a output a digital 0 to 5V pulse.
Unipolar Stepper Motor Driver. The EasyDriver requires a 7V to
The new card features 30V supply to power the motor,
- accepts the same serial ASCII com- and has an on board voltage
mands as the KT-5190 to drive the motor regulator for the digital interface. Connect a 4-wire stepper motor and a
eg @01 RMOV 10000 microcontroller and you've got precision motor control!
- accelerate and decelerate motors Caution: Do not connect or disconnect a motor while the driver is ener-
- control up to 4 KT-5206's from the one RS232 serial port gized. This will cause permanent damage to the A3967 IC.
- accepts a 0-5V signal to control the speed of the stepper motor. Features:
- a double sided PCB (more reliable and no links to solder). * A3967 driver configured for 8-microstep mode
- screw terminals for all inputs, power and motor connections. * Compatible with 4, 6, and 8 wire stepper motors
- Full and Half Step (less resonance problems) operation * Adjustable current control from 150mA/phase to 750mA/phase
- Step and Direction Input. * Power supply range from 7V to 30V. The higher the voltage, the
- an enable input which will remove all power to the motor . higher the torque
Dimensions 75x105x20mm . Dimensions 43 x 21 x 8mm
Note at higher currents the A3967 gets hot and may need cooling
Price Each 1 5+
KTA-206 Assembled and Tested $95.00 $85.50 Price Each 1 5+
SMC-020 EasyDriver Bipolar Stepper Drive $29.50 $26.55

Page 43 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MOTOR CONTROLLERS
KIT-179 Unipolar Stepper Motor Dual Unipolar Stepper Motor Controller

Standard circuit to drive 5, 6 or 8 Connects to the PC printer port & will drive
wire unipolar stepper motors. Can two unipolar stepper motors up to max. 3A
be operated in free-standing each. All contained in an extended D-shell
(internal oscillator) or PC-controlled case. Will also accept 4 inputs from exter-
(direction, step) mode. Uses nal switches. A DOS based software pro-
IRFZ44 power MOSFETs to drive gram (also runs under Windows) written
the motors. These MOSFETs have specifically to drive stepper motors is in-
a low on resistance and can and cluded, complete with C source code. Soft-
can carry 6A each with needing a heatsink. Separate supply voltage for ware provides three run modes and will
kit and motors if required. Up to six driver boards (for controlling 6 mo- half-step, single-step or manual-step motors. Software will run interac-
tors) can be connected to a single PC parallel port. tively or process a text file of commands.
Price Each 1 5+ Price Each 1 5+
KIT-179 As Kit $22.50 $20.00 KIT-113 As Kit $34.50 $31.00
KTA-179 Assembled and Tested $36.00 $32.40 KTA-113 Assembled and Tested

DC Servo Motor Controller Stepper Motor Power Supply

The DB810A is a digital DC servo driver SPS series power supplies are switchable
developed with CPLD and high efficient DC power supplies specifically designed
MOSFET technologies. In position con- for stepping & servo driver. The normal
trol, it’s easy for end users to change regulated switchable power supplies usu-
stepping drivers to the DB810A without ally work with bad variability and low effi-
changing control systems, because its ciency when used in stepping or servo
input command is PUL/DIR signal, which driving. Tthis is because conventional
is compatible with that of stepping driv- switching power supplies are designed for the constant, unvarying loads
ers. In low power motion control applica- of circuit boards. Whereas, when the stepping or servo system are run-
tions, performances of DC servo systems ning, the driving current varies extremely fast, which is belonged to in-
using the DB810A are better than those of digital AC servo systems in ductive load, herein the driver and power supplies would be damaged
velocity, precision, noise, stability, or at least as good as those of digital easily. This supply is capable of delivering current to motor drivers with-
AC servo systems. However, the cost of the DB810A stays at the price out affecting the reliability due to its unregulated specialty and bulky
line of stepping driver, namely far lower than those of AC servo drivers.. capacitance. By selecting correct model, one supply can drag 1-3 shafts
motors and so the average cost per shaft is saved.
Features
Features
- 18-80VDC, 0-20A, 20-400W - Designed specifically for stepping/servo using
- PID feedback servo drive - Compact size, lightweight
- Feedback resolution ×4 encoder line count - Output power 300W (continuous work)
- Lock range +/- 128 count following error - Short circuit, over-current & over-voltage
- Opto-isolated pulse and direction inputs (differential)
The SPS407 supplies
- Over-current and short-circuit protection
- output 7A continuous at 40V (9A Peak current).
- Input Supply 240VAC
Small size 110 x 69 x 27mm - Weight - 0.45Kg - Dimensions 112×102×55mm Weight - 0.45Kg

Price Each 1 5+ Price Each 1 5+

SMC-240 DB810A Servo Motor Drive $229.00 $206.10 SMC-100 40V Power Supply $109.00 $98.10

OCEAN CONTROLS - CNC PACKAGES

50 oz-in Frame 17 Mini 3 Axis CNC Pack 175 oz-in High Speed 3 Axis CNC Pack

The CNC-001 3 Axis Package includes The CNC-004 3 Axis Package includes
3 x Hi-Speed MOT-120 Stepper Motors 3 x Hi-Speed Frame 23 MOT-122 Stepper
3 x M325 Stepper Motor Drivers (1,2,4 and 8 Motors
Microstepping) 3 x M542 Microstepping Drivers (up to
1 x 150W 24VDC Power Supply 25000 steps per rev)
1 x Parallel Port Interface KTA-192 2 x SPS407 40VDC Stepper Supply
1 x Wiring Diagram 1 x Parallel Port Interface KTA-192
1 x Wiring Diagram
The CNC-101 Additional Axis Package in-
cludes The CNC-104 Additional Axis Package includes
1 x High Speed MOT-120 Stepper Motors (see Specs) 1 x High Speed Frame 23 MOT-122 Stepper Motor
1 x M325 Stepper Motor Driver (1,2,4 and 8 Microstepping) 1 x M542 Microstepping Driver (up to 25000 steps per rev)
1 x PSM-002 24VDC 40W Power Supply

Price Each 1 Price Each 1

CNC-001 50 Oz-In Frame 17 Mini CNC Pack $499.00 CNC-004 175 oz-in High Speed CNC Pack $799.00
CNC-101 50 Oz-In Frame 17 Additional Axis $179.00 CNC-104 175 oz-in High Speed Additional Axis Pack $189.00

Page 44 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MOTOR CONTROLLERS
262 oz-in High Speed & Torque CNC Pack 262 oz-in Hi-Speed & Torque CNC Pack

The CNC-005 3 Axis Package includes The CNC-006 3 Axis Package includes
3 x Hi-Speed Frame 23 MOT-125 Motors 3 x High Speed Frame 23 MOT-125 Motors
3 x M542 Microstepping Drivers (up to 3 x ND556 Low Noise Sinusoidal Drivers
25000 steps per rev) 2 x SPS407 40VDC Stepper Supplies
2 x SPS407 40VDC Stepper Supplies 1 x Parallel Port Interface KTA-192
1 x Parallel Port Interface KTA-192 1 x Wiring Diagram
1 x Wiring Diagram
$1102 Value for $929
$1012 Value for $859

The CNC-106 Additional Axis Package

The CNC-105 Additional Axis Package includes
1 x High Speed Frame 23 MOT-125 Stepper Motor
1 x High Speed Frame 23 MOT-125 Stepper Motor
1 x ND556 Low Noise Sinusoidal Driver
1 x M542 Microstepping Driver (up to 25000 steps per rev)
$278 Value for $229
$248 Value for $209
Price Each 1 Price Each 1
CNC-005 262 oz-in High Speed CNC Pack $859.00 CNC-006 262 oz-in High Speed CNC Pack $929.00
CNC-105 262 oz-in High Speed Additional Axis Pack $209.00 CNC-106 262 oz-in High Speed Additional Axis Pack $229.00

310 oz-in High Speed & Torque CNC Pack 430 oz-in High Torque CNC Pack
The CNC-007 3 Axis Package includes The CNC-010 3 Axis Package includes
3 x Hi-Speed Frame 23 MOT-105 Stepper 3 x Frame 24 MOT-128 Stepper Motors
Motors 3 x M542 Microstepping Drivers
3 x ND556 Low Noise Sinusoidal Drivers 2 x SPS407 40VDC Stepper Supply
3 x SPS407 40VDC Stepper Supply 1 x Parallel Port Interface KTA-192
1 x Parallel Port Interface KTA-192 1 x 12VDC Plug Pack
1 x Wiring Diagram 1 x Wiring Diagram

$1211 Value for $1029 $1072 Value for $899

The CNC-107 Additional Axis Package The CNC-110 Additional Axis Package includes
1 x High Speed Frame 23 MOT-105 Stepper Motor 1 x Frame 24 MOT-128 Stepper Motor
1 x ND556 Low Noise Sinusoidal Driver 1 x M542 Microstepping Driver
1 x SPS407 40VDC Stepper Supply
$228 Value for $219
$387 Value for $329

Price Each 1 Price Each 1

CNC-007 310 oz-in High Speed CNC Pack $1029.00 CNC-010 430 oz-in High Torque CNC Pack $899.00
CNC-107 310 oz-in High Speed Additional Axis Pack $329.00 CNC-110 430 oz-in Additional Axis Pack $219.00

430 oz-in High Torque CNC Pack 630 oz-in High Torque CNC Pack
The CNC-011 3 Axis Package includes The CNC-020 3 Axis Package includes
3 x Frame 24 MOT-128 Stepper Motors 3 x MOT-130 Stepper Motors
3 x ND556 Low Noise Sinusoidal Drivers 3 x ND556 Low Noise Sinusoidal Drivers
2 x SPS407 40VDC Stepper Supply 3 x SPS407 40VDC Stepper Supply
1 x Parallel Port Interface KTA-192 1 x Parallel Port Interface KTA-192
1 x 12VDC Plug Pack 1 x 12VDC Plug Pack
1 x Wiring Diagram 1 x Wiring Diagram

$1162 Value for $979 $1439 Value for $1219

The CNC-120 Additional Axis Package in-

The CNC-111 Additional Axis Package includes
cludes
1 x Frame 24 MOT-128 Stepper Motor
1 x MOT-130 Stepper Motor
1 x ND556 Low Noise Sinusoidal Driver
1 x ND556 Low Noise Sinusoidal Driver
1 x SPS407 40VDC Stepper Supply
$298 Value for $249
$463 Value for $389

Price Each 1
CNC-011 430 oz-in High Torque CNC Pack $979.00 Price Each 1
CNC-111 430 oz-in Additional Axis Pack $249.00 CNC-020 630 oz-in High Torque CNC Pack $1219.00
CNC-120 630 oz-in Additional Axis Pack $389.00

Page 45 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MOTOR CONTROLLERS
630 oz-in High Torque CNC Pack 3 Axis DC Servo CNC Pack

The CNC-022 3 Axis Package includes The CNC-014 3 Axis Package includes
3 x MOT-132 Stepper Motors
3 x MD882 Microstepping Drivers
3 x SPS407 40VDC Stepper Supply 3 x MOT-270 DC Servo Motors with 500
1 x Parallel Port Interface KTA-192 line Encoders
1 x 12VDC Plug Pack 3 x DB810A Servo Drives
1 x Wiring Diagram 2 x PSM-008 Power Supply
1 x Parallel Port Interface KTA-192
1 x Wiring Diagram
$1697 Value for $1439
$1565 Value for $1329

The CNC-122 Additional Axis Package includes

1 x MOT-132 Stepper Motor The CNC-114 Additional Axis Package includes
1 x MD882 Microstepping Drivers 1 x MOT-270 Servo Motor with 500 line Encoder
1 x SPS407 40VDC Stepper Supply 3 x DB810A Servo Drive

$549 Value for $459 $454 Value for $379

Price Each 1
Price Each 1
CNC-022 1207 oz-in High Torque CNC Pack $1439.00
CNC-014 Servo CNC Pack $1329.00
CNC-122 1207 oz-in Additional Axis Pack $459.00
CNC-114 Servo Additional Axis Pack $379.00

3 Axis DC Servo CNC Pack

The CNC-015 3 Axis Package includes

3 x MOT-280 DC Servo Motors with 1000

line Encoders
3 x DB810A Servo Drives
1 x PSM-201 500W Power Supply
1 x Parallel Port Interface KTA-192
1 x Wiring Diagram

$1786 Value for $1499

The CNC-115 Additional Axis Package includes

1 x MOT-280 Servo Motor with 1000 line Encoder
3 x DB810A Servo Drive

$468 Value for $394

Price Each 1
CNC-015 Servo CNC Pack $1499.00
CNC-115 Servo Additional Axis Pack $394.00

Page 46 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MOTORS

MOT-301 Mini Servo 4.8V-6V MOT-302 Standard Size Power Servo 4.8V-6V

Mini sized servo perfect for R/C or robot- Standard sized servo suitable for 1/10th
ics applications where size is at a pre- scale R/C cars and robotics applications.
mium. Strong torque for power applications.

Dimensions: 35 x 16.9 x 32mm (L x W Dimensions: 39.5 x 20 x 39.6mm (L x

x H) W x H)
Weight: 26g Weight: 46g
Torque 4.8V: 3.4kg / cm Torque 4.8V: 7.2kg / cm
Transit Time 4.8V: 0.19 sec / 60 deg Transit Time 4.8V: 0.33 sec / 60 deg
Torque 6V: 4.2kg / cm Torque 6V: 8kg / cm
Transit Time 6V: 0.15 sec / 60 deg Transit Time 6V: 0.27 sec / 60 deg

Price Each 1 5+ Price Each 1 5+

MOT-301 Mini Servo 4.8-6V $22.65 $20.40 MOT-302 Standard Size Servo 4.8-6V $22.65 $20.40

MOT-303 Heavy Duty Servo 4.8V-6V MOT-310 Giant Servo 4.8V-6V

A heavy duty servo which won't make a For projects that require brute strength,
heavy duty dent in your wallet. Features look no further than this giant-scale
include ball bearing, high torque and servo. This servo will deliver eight times
quick transit time. the torque of a standard servo, has two
ball bearings, and has metal gears to
Dimensions: 54.4 x 26.5 x 51.5mm (L x handle those extra-tough loads. In-
W x H) cludes Servo Horns
Weight: 110g Dimensions: 63.0 x 32.0 x
Torque 4.8V: 10kg/cm 61.6mm Weight: 160g
Transit Time 4.8V: 0.25 sec / 60deg Torque 4.8V: 24kg/cm
Torque 6V: 13kg / cm Transit Time 4.8V: 0.24 sec / 60deg
Transit Time 6V: 0.20 sec / 60deg Torque 6V: 28.8kg / cm
Transit Time 6V: 0.20 sec / 60deg

Price Each 1 5+ Price Each 1 5+

MOT-303 Heavy Duty Servo 4.8-6V $36.30 $32.65 MOT-310 Giant Servo 4.8-6V $75.00 $67.50

MOT-310 Jumbo Servo 4.8V-6V

Horns for R/C Servo Motors
This is our largest servo and feature
huge torque and speed Features include
MOT-304 Packet of 6 mixed servo
ball bearing, high torque and quick
horns to suit our Mini Servo and
transit time.
Standard Sized Servo
Dimensions: 65.0 x 32.0 x 70.4mm (L
x W x H)
MOT-305 Packet of 2 servo horns to
Weight: 190g
suit our heavy duty servo
Torque 4.8V: 35kg/cm
Transit Time 4.8V: 0.15 sec / 60deg
Torque 6V: 42kg / cm
Transit Time 6V: 0.12 sec / 60deg Price Each 1 5+
MOT-304 Packet of Mixed Servo Horns $5.40 $4.85
Price Each 1 5+ MOT-305 Packet of Heavy Servo Horns $5.40 $4.85
MOT-312 Jumbo Servo 4.8-6V $115.00 $103.50
PM55L-048 Stepper Motor

Precision Stepper Motor, ideal for small projects

and robots, good output characteristics and small
size.
Does not come with connector cable but the pins
are accessible for soldering.
Features
• 55mm Outer Diameter
• High Torque for size
• Step Angle: 7.5deg
• Shaft protrudes through both ends with pinion gear on top
• Dimensions: 55mm Wide, 25mm High, 65mm between mounting
Price Each 1 5+
MOT-004 PM55L-048 Stepper Motor $18.00 $16.00

Page 47 Ocean Controls Catalog 2008

 OCEAN CONTROLS - HI PERFORMANCE STEPPER MOTORS
MOT-110 Bipolar Stepper Motor MOT-115 Bipolar Stepper Motor

Industrial grade small Stepper Motor, ideal Industrial grade small Stepper Motor, ideal for
for small CNC projects and robots. Has a small CNC projects and robots. Has a holding
holding torque of 1.0Kg.cm (0.098Nm or torque of 2.0Kg.cm (0.196Nm or 28oz-in).
14oz-in). Shaft at one end Shaft at one end

Features Features
- Voltage 10V - Step Angle 1.8deg
- Current 0.5A - Voltage 6V
- Resistance per coil 20Ohm - Current 0.8A
- Inductance per coil 18mH - Resistance per coil 7.5Ohm
Dimensions: 35mm x 35mm square face, 36mm long, 26mm between - Inductance per coil 6
mounting holes Dimensions: 39mm x 39mm square face, 38mm long, 31mm between
- 4 Leads mounting holes
- Weight: 0.18Kg - 6 Leads
- Weight: 0.2Kg
Price Each 1 5+
Price Each 1 5+
MOT-110 Bipolar Stepper Motor $22.00 $19.80
MOT-115 Bipolar Stepper Motor $27.50 $24.75

MOT-120 (Frame 17) Bipolar Stepper Motor MOT-122 (Frame 23) Bipolar Stepper Motor

Industrial grade small Stepper Motor, ideal Industrial grade small Stepper Motor, ideal for
for small CNC projects and robots. Has a CNC projects and robots. Has a holding
holding torque of 3.6Kg.cm (0.35Nm or torque of 12.6Kg.cm (1.24Nm or 175oz-in).
50oz-in). Shaft at both ends Shaft at both ends

Features Features
- Step Angle 1.8deg - Step Angle 1.8deg
- Voltage 2.8V, Current 1.68A - Voltage 2.5V
- Resistance per coil 1.65Ohm - Current 2.8A
- Inductance per coil 3.2mH - Resistance per coil 0.9ohm
Dimensions: 42mm x 42mm square face, 40mm long, 26mm between - Inductance per coil 2.5mH
mounting holes - Dimensions: 56mm x 56mm square face, 56mm long, 47mm between
- 4 Leads mounting holes
- Weight: 0.3Kg - 4 Leads
• Weight: 0.15Kg - Weight: 0.7Kg

Price Each 1 5+ Price Each 1 5+

MOT-120 Bipolar Stepper Motor $59.00 $53.10 MOT-122 Bipolar Stepper Motor $79.00 $71.10

MOT-125 (Frame 23) Bipolar Stepper Motor Bipolar Stepper Motor– Torque 2.2Nm

Industrial grade small Stepper Motor, ideal This motor is a 23 Frame motor with 4 phases
for CNC projects and robots. Has a holding which you can wire in parallel or serial provides.
torque of 18.9Kg.cm (1.85Nm or 262oz-in). It has a holding torque of 2.2 N.m (311oz-in) and
Shaft at both ends is suitable for very heavy operation

Features Features
- Step Angle 1.8deg • Rated Current: 2.8A (Series), 5.7A(Parallel)
- Voltage 3.2V • Phase Resistance 1.6ohm
- Current 2.8A • Phase Inductance 7.2mH
- Resistance per coil 1.13ohm • Step angle: 1.8deg
- Inductance per coil 3.6mH • Ambient Temp -10 to 50degC
- Holding Torque 18.9Kg.cm • Temp Rise 80degC
Dimensions: 56mm x 56mm square face, 76mm long, 47mm between • Dimensions: 56mm x 56mm square face, 80mm long, 47mm between
mounting holes mounting holes
- 4 Leads • Weight: 1.2Kg
- Weight: 1Kg • Shaft extends 20mm from both ends of the motor
• Shaft extends 20mm and 15mm from ends of the motor You will need to use a MD542 or ND556 drive with this motor

Price Each 1 5+ Price Each 1 5+

MOT-125 Bipolar Stepper Motor $99.00 $89.10 MOT-105 Bipolar Stepper Motor 57HS22 $99.00 $89.10

Page 48 Ocean Controls Catalog 2008

 OCEAN CONTROLS - HI PERFORMANCE STEPPER MOTORS
MOT-128 (Frame 24) Bipolar Stepper Motor MOT-130 Bipolar Stepper Motor

Industrial grade small Stepper Motor, Industrial grade Stepper Motor, ideal for
ideal for CNC projects and robots. Has a driving heavier loads. Has a holding torque of
holding torque of 31Kg.cm (3.04Nm or 46Kg.cm (4.51Nm or 638oz-in). Shaft at both
430oz-in). Shaft at both ends ends

Features Features
- Step Angle 1.8deg - Step Angle 1.8deg
- Voltage 4.2V - Voltage 2.5V
- Current 2.8A - Current 5.5A
- Resistance per coil 1.5ohm - Resistance per coil 0.46ohm
- Inductance per coil 6.8mH - Inductance per coil 4mH
- Holding Torque 31Kg.cm - Holding Torque 46Kg.cm
Dimensions: 60mm x 60mm square face, 88mm long, 47mm between Dimensions: 86mm x 86mm square face, 80mm long, 69mm between
mounting holes mounting holes
- 8 Leads - 4 Leads
- Weight: 1.4Kg - Weight: 2.3Kg
- Shaft extends 20mm and 15mm from ends of the motor - Shaft extends 30mm from both ends of the motor

Price Each 1 5+ Price Each 1 5+

MOT-128 Bipolar Stepper Motor $119.00 $107.10 MOT-130 Bipolar Stepper Motor $175.00 $157.50

MOT-132 Bipolar Stepper Motor Bipolar Stepper Motor– Torque 4.1Nm

This motor with 4 phases which you can wire in parallel or serial pro-
Industrial grade Stepper Motor, ideal for
vides a holding torque of 4.1 N.m and is suitable for very heavy opera-
driving heavier loads. Has a holding torque
tion.
of 87Kg.cm (8.53Nm or 1207oz-in). Shaft
at both ends
Features
• Rated Current: 2A, phase resistance 3.2,
Features
inductance 18mH
- Step Angle 1.8deg
• Step angle: 1.8deg
- Voltage 3.6V
• Ambient Temp -10 to 40degC
- Current 6A
• Temp Rise 85degC
- Resistance per coil 0.6ohm
• Dimensions: 86mm x 86mm square face,
- Inductance per coil 6.5 mH
98mm long, 70mm between mounting holes
- Holding Torque 87Kg.cm
• Weight: 2.8Kg
Dimensions: 86mm x 86mm square face, 80mm long, 69mm between
mounting holes
- 4 Leads
- Weight: 3.8Kg Price Each 1
- Shaft extends 30mm from both ends of the motor MOT-104 Bipolar Stepper Motor 34HD101 $79.00
Price Each 1 5+
MOT-132 Bipolar Stepper Motor $215.00 $193.50

OCEAN CONTROLS - DC SERVO MOTORS

DC Servo Motor

DCM5xxxx series motors are permanent magnet DC brush servo motors. The motors are ideal for cost sensitive
applications. They include an attached encoder which provides position feedback to controllers.
Suitable for a wide range of equipments and instruments such as engraving machines, cutting machines, jet-ink
machines , experimental installations, instructional machines, imager, analytic instruments, electronic packaging
equipments and loading and unloading devices, medical instruments,etc. It performs better in equipments which
expected to be low noise, high precision and high velocity.
Features Include
- High performance (Smooth operation, High precision and Low noise)
- Low cost
- Small disturbance
- Model DCM50205 comes with a 500 line encoder
- Model DCM50207 comes with a 1000 line encoder
- Positional error can be eliminated to one pulse
- Mounting dimensions of DCM57xxx brush servo motors are the same as those of NEMA 23 size motors

Price Each 1 5+
MOT-270 DCM50205 DC Servo Motor with encoder $225.00 $202.50
MOT-280 DCM50207 DC Servo Motor with encoder $239.00 $215.10

Page 49 Ocean Controls Catalog 2008

 OCEAN CONTROLS - MOTORS
GEARBOX WITH MOTOR REVERSIBLE 12V 70RPM GEARBOX WITH MOTOR REVERSIBLE 12V 36RPM

This compact unit will give a massive Only slightly larger than the MO-101,
2.1 kg/cm of torque at 70 RPM. Cur- it has a much larger torque (12.0Kg/
rent draw rises to a modest 390 MA. CM) at 36RPM. It is ideal for driving
wheels or other traction devices.
SPECS:
SPECS:
Torque 2.1kg/cm
Torque 12.0kg/cm
Rated Voltage 12.0V
Rated Voltage 12.0V
Operating 4.5 - 18V
Operating 4.5 - 18V max
max
Current - No load 70mA
Current - No load 30mA
Current - Full load 1380mA
Current - Full load 390mA
Gear Ratio 244:1
Gear Ratio 82:1
Shaft Speed 36RPM
Shaft Speed 70RPM

Price Each 1 Price Each 1

MOT-201 Reversible Gearbox Motor 12V 70RPM $11.77 MOT-202 Reversible Gearbox Motor 12V 36RPM $18.14

GEARHEAD MOTOR REVERSIBLE 12VDC - 140RPM MO-210 DC MOTOR 12VDC - 11800RPM

Featuring a torque of 50Kg/cm this A compact ferrite magnet type DC Motor featuring
motor is for heavy duty applications. hard steel drive shaft, long life design and are built
in an ISO 9002 quality environment.
SPECS:
Torque 50kg/cm No load
Speed (RPM) 11800
Rated Voltage 12.0V
Current (AMP) 0.8
Operating -
Operating Range (V) 6-12
Current - No load 270mA
At Stall
Current - Full load 11.7A
Torque (kg/cm) 2.7
Gear Ratio 1000:1
Current (AMP) 26
Shaft Speed 140RPM
At Max Efficiency
Weight 300g
Efficiency (%) 76
Power (W) 43
Speed (RPM) 9800
Torque (kg/cm) 0.42
Current (A) 4.7
Price Each 1 Price Each 1
MOT-203 Reversible Gearbox Motor 12V 14RPM $36.32 MOT-210 High Power DC Motor 11800 RPM $13.59

MO-212 DC MOTOR 12VDC - 18800RPM

MO-211 DC MOTOR 12VDC - 9700RPM
A compact ferrite magnet type DC Motor featur-
A compact ferrite magnet type DC Motor featur- ing hard steel drive shaft, long life design and are
ing hard steel drive shaft, long life design and are built in an ISO 9002 quality environment.
built in an ISO 9002 quality environment.
No load
No load Speed (RPM) 18800
Speed (RPM) 9700 Current (AMP) 2.6
Current (AMP) 1.3 Operating Range (V) 6-12
Operating Range (V) 6-18 At Stall
At Stall Torque (kg/cm) 4.9
Torque (kg/cm) 6.0 Current (AMP) 92
Current (AMP) 57 At Max Efficiency
At Max Efficiency Efficiency (%) 71
Efficiency (%) 73 Power (W) 107
Power (W) 52 Speed (RPM) 15520
Speed (RPM) 8490 Torque (kg/cm) .67
Torque (kg/cm) .60 Current (A) 12.8
Current (A) 6.0
Price Each 1
MOT-211 High Power DC Motor 18800 RPM $17.22
Price Each 1
MOT-211 High Power DC Motor 9700 RPM $18.14

Page 50 Ocean Controls Catalog 2008

 OCEAN CONTROLS - SOFTWARE
ModbusView Version 1.41

ModbusView is an easy to use program that monitors and simulates

Modbus communications on your PC. It enables your PC to act as
both a modbus master and a slave device making it easy for you to
simulate the action of your HMI machine, instruments, PLCs etc. Mod-
busView can operate on a PC under Windows 95/98, ME, NT, 2000
and XP. It can communicate both in the RTU form and the ASCII form
and it can also be set to a range of baud rates, data bits, parity and
stop bits.
The user can monitor and set the status of coils, input status, holding
registers and input registers. The values of the input and holding reg-
isters can be viewed in decimal, hexadecimal, long integer, long hexa-
decimals and floating point (forward and reverse)

Price Each 1
ModbusView $85.00

ISEE Modbus
The ISEE-MODBUS data acquisition program is a fully featured mini-
mum cost HMI program for controlling and monitoring controllers,
PLCs and instrumentation that use the modbus protocol. Running
under Windows XP/2000/NT/ME/98 it allows the user to
- Interrogate multiple controllers, PLCs and instruments
- Supports RTU and ASCII modes of Modbus
- View the holding and input registers. They can be viewed as raw
readings or in engineering units.
- Holding and Input registers can contain integers, long integers and
floating point numbers
- View the status of the coils and input status
- Write to the coils and holding registers
- Supports up to 1024 tags
- No graphics to draw. Simply display the readings on the screens.
Readings can be grouped as you like.
- Display registers, coils, statuses and calculated variables on graphs
or trends

Price Each 1
ISEE-modbus Software $125.00

VIEW INTEGRA
The VIEW-INTEGRA data acquisition program is a fully featured minimum
cost HMI program for controlling and monitoring Crompton Instruments
Integra 1500 series of Digital Meters. Running under Windows XP/2000/
NT/ME/98 it allows the user to

- Interrogate up to 30 Digital Meters

- All Parameters are already defined ready to use
- View the value of parameters and units.
- Can reset Energy consumption values such as Total KWs
- Can define your own internal variables or tags for control and alarm
purposes
- No graphics to draw. Simply display the readings on the screens.
Readings can be grouped as you like.
- Display values of parameters and internal variables on graphs or
trends
- View the maximum and minimum values for each tag
- Log parameters and internal variables to a csv type file
- Display and analyse Historical logged files on graphs Price Each 1
- Define and display alarms

Page 51 Ocean Controls Catalog 2008

 OCEAN CONTROLS - SOFTWARE
Front Designer Software V3

Times have changed and there is no need to keep your elaborate

electronic project in an old cigar packet any longer.Today specialised
dealers offer cases for almost all electronic applications you may think
of. But still self-made devices often look quite incomplete, because of
a missing front panel design. Use FrontDesigner to design good-
looking front panels for your self-made devices and take advantage of
the following features:
- exactly fitting coloured and b/w symbols and labels
- predefined and user-editable library
- a scale-assistant creates scales for switches, potentiometers and
instruments
- measurement options simplify drilling
With FrontDesigner you are able to mill or engrave your front panels.
The HPGL export creates plot files, which you can use to produce
absolut exact front panels with CNC machines.

Price Each 1
Front Designer Software $69.95

Audio Wave Software V2

With AudioWave 2.0 your soundcard becomes a comfortable LF-signal-

generator, which produces signals from 1Hz to 20 kHz with a resolution of 1
Hz. Phase shift between left and right channel is adjustable from –180° to
+180° and an attenuator can be used for steps of 0dB, -3dB, -6dB, -10 dB, -
20 dB, -30dB. Frequency, level and attenuation can be adjusted independ-
ently for left and right channel and optionally left and right channel can be
chained. AudioWave produces sine and noise signals, as well as modulated
signals. Automatic frequency and level progress is programmable. Complex
adjustment can be stored as presets with clear names.
Improvements with Version 2
Frequency adjustment 1Hz...20 kHz; 1 Hz resolution
Direct frequency input via keyboard
Soft frequency change
Independent or chained control of frequency, level and attenuation for left and right channel
Channel mute function
Duration up to 60 seconds for modulated signals

Price Each 1
AudioWave Software $59.95

Page 52 Ocean Controls Catalog 2008

 OCEAN CONTROLS - RELAYS
12VDC or 24VDC PCB Relays 10A DPDT DIN Mount Relays

These SPDT relays from Goodsky are type 12VDC or 24VDC or 240VAC coil relay with two
RWH-SH-112D 12V and RWH-SH-124D 24V changeover contacts (DPDT) rated at 10A
Can switch 10A at 240VAC and 24VDC. 240VAC. Features LED Indicator. Coil at 12VDC
160ohms. Coil at 24VDC 650ohms. It is mounted
Coil Resistance 400ohm 12VDC, 1600ohm on a DIN Rail Mount base with screw Terminals.
24VDC Can be mounted by screws or on a Din Rail
Life expectancy Features built in LED Indicator
mechanical 10,000,000 operations at no load
electrical 100,000 at rated resistive load

Price Each 1 5+ Price Each 1 5+

RLY-001 12V PCB Relay $2.50 $2.00 RLY-003 12VDC Relay and DIN Base $11.50 $10.35
RLY-002 24V PCB Relay $2.50 $2.00 RLY-004 24VDC Relay and DIN Base $11.50 $10.35
RLY-010 240VAC Relay and DIN Base $13.95 $12.55

10A 4PDT DIN Mount Relays

40A 240VAC Solid State Relay
These relays feature both an LED and Press
to Test button The SS-240DA is a panel mounting solid
state relay that offers 4-32VDC input con-
trol, with the output rated at 40Amps @
Specifications 240VAC. It provides 4000Vms opto-
Max Voltage 250VAC,110VDC isolation between input and output. Comes
Max Current 10A (total) with cover to minimize contact with live
Coil Resistance (24VDC) 350Ohm voltages (see picture)
Life expectancy Input Circuit
mechanical 10,000,000 operations no load - Control Voltage Range: 4- 32VDC
electrical 100,000 at rated resistive load - Control Current: 6 to 10mA
- Pick Up voltage: 4V DC
Available also in 24VAC coils - Drop Out Voltage: 2VDC

Price Each 1 5+ Output Circuit

RLY-005 4PDT DIN Mount Relay 24VDC $18.00 $16.20 - Nominal Line Voltage: 240V AC
RLY-005 4PDT DIN Mount Relay 24VAC $18.00 $16.20 - Load Voltage Range: 24- 280V AC
- Min. Blocking Voltage: 600V AC
- Max one- cycle surge current: 400A
40A 240VAC Solid State Relay - Operating/Storage Temperature: -20 to 80degC/-40 to 100degC
- Dimensions:57(L) x 45(W) x30(H)mm
The SS-240AA Solid State Relay from Conch
Price Each 1+
is a panel mounting solid state relay that of-
SSR-100 SS-240DA 4-32VDC Input 40A@240v AC Switch $35.00
fers 80-280VAC input control, with the output
rated at 40Amps @ 240VAC. It provides
4000Vms opto-isolation between input and
output. Comes with cover to minimize contact 10A 60VDC Solid State Relay
with live voltages (see picture)
Input Circuit The SS-110DD Solid State Relay from
- Control Voltage Range: 80-280Vac Conch is a panel mounting solid state relay
- Control Current: 10mA/110Vac that offers 4-32VDC input control, with the
- Pick Up voltage: 60V AC output rated at 10Amps @ 60VDC. It pro-
- Drop Out Voltage: 40VAC vides 4000Vms opto-isolation between input
and output. Comes with cover to minimize
Output Circuit contact with live voltages (see picture)
- Nominal Line Voltage: 240V AC Input Circuit
- Load Voltage Range: 24- 280V AC - Control Voltage Range: 4-32Vdc
- Min. Blocking Voltage: 600V AC - Control Current: 6-10mA
- Max one- cycle surge current: 400A - Pick Up voltage: 4V dc
- Operating/Storage Temperature: -20 to 80degC/-40 to 100degC - Drop Out Voltage: 2 V dc
- Dimensions:57(L) x 45(W) x30(H)mm
Output Circuit
Price Each 1+ - Load Voltage Range: 5-60V DC
SSR-110 SS-240AA 80-280VAC Input 40A@240v AC Switch $35.00 - Non rep. peak voltage: 150Vp
- Leakage current <1mA
- Operating/Storage Temperature: -20 to 80degC/-40 to 100degC
- Dimensions:57(L) x 45(W) x30(H)mm

Price Each 1+
SSR-120 SS-240DD 4-32VDC Input 10A@60V DC Switch $35.00

Page 53 Ocean Controls Catalog 2008

 OCEAN CONTROLS - RELAY CARDS
40A 240VAC Solid State Relay Potentiometer Input 40A 240VAC Solid State Relay with 4-20mA Input

The SS-240VA is a panel mounting solid The SS-240CA is a panel mounting solid state
state relay that allows a 500KOhm pot to be relay that allows a 4-20mA signal to be con-
connected across the input. The position of nected across the input. The level of the 4-20mA
the potentiometer results in Phase Trigger signal results in Phase Trigger Control of the
Control of the Load. If the potentiometer is Load. A curve is provided on the datasheet
set at 10% then 10% of each half cycle is showing the relationship between the input cur-
passed. (Warning there is no isolation rent and the Output Percentage load. The load
between the input and output. There is output is rated at 40Amps @ 240VAC. It pro-
240VAC across the potentiometer inputs. vides 4000Vms opto-isolation between input and
The potentiometer must be rated to output. A cover to minimize contact with live
240VAC) The breakdown voltage is rated voltages is included
at 2500Vrms. Comes with cover to minimize contact with live voltages Specifications:
Specifications: Input Circuit
Input Circuit - Input Control Range 4-20mA
- Potentiometer Resistor 500KOhm for 240VAC
Output Circuit Output Circuit
- Load Voltage Range: 80-280V AC - Load Voltage Range: 90-260V AC
- rated at 40Amps @ 240VAC. - Non rep. peak voltage: 600Vp
- Non rep. peak voltage: 600Vp - Leakage current 8mA
- Leakage current 8mA - 1 Cycle Surge Current 400A
- 1 Cycle Surge Current 400A - Operating/Storage Temperature: -20 to 80degC/-40 to 100degC
- Dimensions:57(L) x 45(W) x30(H)mm
Price Each 1+ - DIN Rail Mount Heat Sink included.
SSR-125 SS-240VA 500K Pot Input 40A@240V AC Switch $35.00
Price Each 1+
SSR-130 SS-240CA 4-20mA Input 40A@240V AC Switch $75.00
PCB Solid State Relays
Solid State Relay Heatsink
This PCB mounting, single in line package relay capable of switching up
to 240V AC at 3 amps. These heatsinks are designed for mount-
Input Circuit ing the 40A 240VAC and SSR-013 solid
- Control Voltage Range: 3- 32VDC state relays on them. They are manufac-
- Control Current: 15mA Max- tured from solid black aluminium and
- Min. turn off voltage: 1V DC come in lengths of 50mm (fits 1 relay) and
- Input Resistance: 2.2kohm min. 100mm (fits 2 Solid State Relays). The
Output Circuit screw holes for the solid state relays are
- Max load current: 3A 4mm.
- Nominal Line Voltage: 240V AC The heatsinks are suitable to be used
- Load Voltage Range: 24- 280V AC with an 80mm fan mounted at the
- Min. Blocking Voltage: 600V AC heatsink end. .
- Max one- cycle surge current: 80A
- Min. Load current: 50mA
- Dimensions:10(D) x 42(W) x25(H)mm

Price Each 1+
SSR-011 32V DC Solid State Relay $10.91

100A DC Solid State Relay

Price Each 1 5+
Solid State Relay 3-32VDC Input 100A@30VDC Switching SSR-020 Black Aluminium Heatsink 50mm for SSR $15.00 $13.50
This solid state relay uses MOSFET technology to provide an economi- SSR-021 Black Aluminium Heatsink 100mm for SSR $22.00 $19.80
cal and reliable method of switching medium to high power DC loads. By
electrical switching with a
Output Circuit
- Load Voltage: 0-30VDC
- Load Current: 0.02-100A
- Max On-State Resistance: 0.007Ohms
- Max On-State Voltage Drop: 0.35V
- Max Turn On Time: 0.5ms
- Max Turn Off Time: 0.5ms
- Max Surge Current: 240A (10ms)
Input Circuit
- Control Voltage: 3-32VDC
- Control Current: 28mA max.
- Min Turn Off Voltage: 1.0VDC
- Input Resistance: 1.2kOhm .
Dimensions: 58.4(L) x 45.7(W) x 22.9(D)mm
Price Each 1+
SSR-013 Solid State Relay 100A@30v DC Switching $36.32

Page 54 Ocean Controls Catalog 2008

 OCEAN CONTROLS - RELAY CARDS
DIN Rail Mounted Heatsink

These heatsinks are designed for mounting the

40A 250VAC and SSR-013 solid state relays
on them. They are manufactured from solid
aluminium and come in height of 40mm and
60mm and a length of 100mm (fits 1 relay).
The screw holes for the solid state relays are
4mm.
The heatsinks are suitable to be used with an
80mm fan mounted at the heatsink end. .

Price Each 1 5+
SSR-030 DIN Rail Aluminium Heatsink 40mm High $27.50 $24.75
SSR-031 DIN Rail Aluminium Heatsink 60mm High $29.50 $26.55

Multiple Relay Cards Multiple Relay Cards DIN Rail Mounted

These would have to be

These would have the most versatile relay
to be the most cards on the market.
versatile relay The cards come in a
cards on the mar- 12V or 24V powered
ket. The cards form.
come in a 12V or Each relay can be oper-
24V powered form. ated by TTL levels,
Each relay can be NPN and PNP open
operated by TTL collector or 0 to 12V (0
levels, NPN and to 24V if using 24VDC
PNP open collector or 0 to 12V (0 to 24V if using 24VDC relays). Each relays). Each relay has
relay has two inputs, marked LO and HI. As the names suggest a low on two inputs, marked LO
the LO input will operate the relay. Similarly a high on the HI input will and HI. As the names
also operate the relay. They also feature LEDs to indicate the state of suggest a low on the
the relay. LO input will operate the relay. Similarly a high on the HI input will also
operate the relay. They also feature LEDs to indicate the state of the relay.
Specifications:
Operating Voltage 12VDC (or 24VDC) Specifications:
Input low voltage (LO) 0 - 0.8V Operating Voltage 12VDC (or 24VDC)
Input high voltage (HI) 2.4 - 12V (or 24VDC) Input low voltage (LO) 0 - 0.8V
Input high voltage (HI) 2.4 - 12V (or 24VDC)
They are available in 2, 4, 6 and 8 Relays cards
They are available in 2, 4, 6 and 8 Relays configurations mounted in a DIN
rail carrier
Price Each 1 5+
Price Each 1 5+
RLC-122 Two 12V Relay Card $21.50 $19.35
RLD-122 Two 12V Relay Card on DIN Rail $40.00 $36.00
RLC-124 Four 12V Relay Card $42.50 $38.25
RLD-124 Four 12V Relay Card on DIN Rail $75.00 $67.00
RLC-128 Eight 12V Relay Card $85.00 $76.50
RLD-128 Eight 12V Relay Card on DIN Rail $150.00 $135.00
RLC-242 Two 24V Relay Card $21.50 $19.35
RLD-242 Two 24V Relay Card on DIN Rail $40.00 $36.00
RLC-244 Four 24V Relay Card $42.50 $38.25
RLD-244 Four 24V Relay Card on DIN Rail $75.00 $67.00
RLC-248 Eight 24V Relay Card $85.00 $76.50
RLD-248 Eight 24V Relay Card on DIN Rail $150.00 $135.00

Page 55 Ocean Controls Catalog 2008

 OCEAN CONTROLS - FANS
60mm 12v DC - 2 Wire Sleeve Bearing FAN-002 80mm 12VDC FAN Sleeve Bearing

- Air Volume 0.57 (M3/min), 20 (CFM) - Air Volume 0.97 (M3/min), 34 (CFM)
- Bearing System Sleeve - Bearing System Sleeve
- Noise 30dB (A) - Noise 32dB (A)
- Speed 4,000 rpm - Speed 3,000 rpm
- Input 1.6 watts - Input 2.4 watts
- Current 130mA - Current 200mA
- Size 60 x 60 x 25.4mm - Size 80 x 80 x 25.4mm
- Flylead connection - Flylead connection
- Impeller Plastic, fibreglass filled - Impeller Plastic, fibreglass filled
- Housing Plastic, fibreglass filled. - Housing Plastic, fibreglass filled

Price Each 1 5+ Price Each 1 5+

FAN-001 60mm 12VDC - 2 Wire Sleeve Bearing $15.91 $14.20 FAN-002 80mm 12v DC - 2 Wire Sleeve Bearing $15.91 $14.32

FAN-003 80mm 12VDC Ball Bearing Fan FAN-004 120mm 12VDC Ball Bearing Fan

Life expectancy 100,000 hours @ 25°C.

- Air Volume 0.97 (M3/min), 34 (CFM) - Air volume 2.3 (m3/min) 80(CFM)
- Noise 32dB (A) - Flylead connection.
- Speed 3,000 rpm - Noise 42 dB (A)
- Input 2.4 watts - Speed 3,000 rpm
- Current 200mA - Input 4.56 Watts
- Size 80 x 80 x 25.4mm - Current 380 mA
- Flylead connection - Size 120 x 120 x 25.4mm
- Impeller Plastic, fibreglass filled - Voltage 12VDC
- Housing Plastic, fibreglass filled. - Impeller Plastic, fibreglass filled
- Housing Plastic, fibreglass filled
- Bearing system Ball race.

Price Each 1 5+
FAN-003 80mm 12v DC - 2 Wire Ball Bearing $18.40 $16.56 Price Each 1 5+
FAN-004 120mm 12v DC - 2 Wire Thin Ball Bearing $25.90 $23.31

FAN-005 80mm 24VDC Sleeve Bearing Fan FAN-006 80mm 24VDC Ball Bearing Fan

Air volume: 1.13 (m3/min) 40(CFM) Life expectancy 100,000 hours @ 25°C.
Noise: 35 dBA- Air volume: 1.13 (m3/min) 40(cfm)
Input: 3.12 Watts Noise: 35 dBA-
Size: 80 x 80 x 25.4mm Input: 3.12 Watts
Impeller: Plastic, fibreglass filled Size: 80 x 80 x 25.4mm-
Housing: Plastic, fibreglass filled Impeller: Plastic, fibre glass filled
Bearing system: Sleeve Housing: Plastic, fibre glass filled
Speed: 3,200 rpm Bearing system : Ball Bearing
Current: 130 mA Speed: 3,200 rpm
Flylead connection Current: 130 mA
Flylead connection

Price Each 1 5+
FAN-006 80mm 24v DC - Ball Bearing Fan $19.95 17.95
Price Each 1 5+
FAN-005 80mm 24v DC - 2 Wire Thin $15.91 14.32

Page 56 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PLC’S
XC3 Series of PLC

The XC3 series from Rockhood Automation features a large number of functions,
large memory capacity, small size and fast scan times

Although economically priced, these PLC's have been built and designed with motion
control in mind. Basic features in the XC series programmable logic controller are

• Max 1024 I/O points using expansion modules.

• Program's capacity is 30K
• Two high speed counter inputs, the highest frequency is 200K.
• 2 pulse outputs for stepper or servo motor control the max pulse output is 400K
• PWM Control
• support for CAN bus, Modbus and TCP/IP Ethernet.

Other features include

• Free Software
• Programmable in Ladder Logic and Instruction List
Can be used with our HMI Displays (OP-320A, MY-330, TP-562T etc )on the next
page

The software is fast and easy to use. It allows for commenting of the variables so the rungs are easy to understand.
It has an online monitor which allows the user to monitor the program on the ladder or open the data window to modify or monitor the data variables
The XCP software also features a rich instruction list which allow calculations in integer, long integer or floating point. Other instructions include ordinal
control, data manipulation, interrupts, communications and motion control.
Copy, cut and paste of instruction and ladder programming allows easy editing of pro-
grams Price Each 1
PLC-001 XC3-14RT-E $215.00
Model Digital Transistor Relay Power Notes PLC-002 XC3-14RT-C $215.00
Inputs Outputs Outputs PLC-021 XC3-32T-C $349.00
XC3-14RT-C 8 2 4 20-30VDC PLC-022 XC3-32T-C $349.00
XC3-14RT-E 8 2 4 90-260VAC PLC-060 XC5-48T-C $525.00
XC3-32T-C 18 14 0 20-30VDC 2 High Speed Pulse Outputs
XC3-32T-E 18 14 0 90-260VAC 2 High Speed Pulse Outputs
XC5-48T-C 28 20 0 20-30VDC 4 High Speed Pulse Outputs

XC3-19AR PLC

The XC3-19AR from Rockhood is a PLC with the following features all in one unit

Basic Performance
- Integrates logic Control, analog input/output in one unit
- Digital Input - 9 points (NPN type optical coupling insulation)
- Digital Output - 10 points (Relay Type)
- Analog Input - 8 points (0 to 10 voltage)
- Analog Output - 2 points (0 to 10 voltage or 4 to 20mA)
- Supports 3 channels AB phase input
- Supports 4 channels high speed count (20KHzs)
- All connections via screw terminals
- High performance-price ratio,major space saving

Other features include

• Free Software
• Programmable in Ladder Logic and Instruction List
The software is fast and easy to use. It allows for commenting of the variables so the rungs are easy to understand.
It has an online monitor which allows the user to monitor the program on the ladder or open the data window to modify or monitor the data variables
The XCP software also features a rich instruction list which allow calculations in integer, long integer or floating point. Other instructions include ordinal
control, data manipulation, interrupts, communications and motion control.
Copy, cut and paste of instruction and ladder programming allows easy editing of programs

Price Each 1
PLC-100 XMP3-18R-C $425.00
PLC-301 OP-XP-CAB Programming Cable $26.00

Page 57 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PLC’S
XC5 Series of PLC

The XC5 series from Rockhood Automation features a large number of functions,
large memory capacity, small size and fast scan times

Although economically priced, these PLC's have been built and designed with motion
control in mind. Basic features in the XC series programmable logic controller are

• Max 1024 I/O points using expansion modules.

• Program's capacity is 30K
• Two high speed counter inputs, the highest frequency is 200K.
• 4 pulse outputs for stepper or servo motor control the max pulse output is 400K
• PWM Control
• support for CAN bus, Modbus and TCP/IP Ethernet.

Other features include

• Free Software
• Programmable in Ladder Logic and Instruction List
Can be used with our HMI Displays (OP-320A, MY-330, TP-562T etc )on the next
page

The software is fast and easy to use. It allows for commenting of the variables so the rungs are easy to understand.
It has an online monitor which allows the user to monitor the program on the ladder or open the data window to modify or monitor the data variables
The XCP software also features a rich instruction list which allow calculations in integer, long integer or floating point. Other instructions include ordinal
control, data manipulation, interrupts, communications and motion control.
Copy, cut and paste of instruction and ladder programming allows easy editing of pro-
grams Price Each 1
PLC-060 XC5-48T-C $525.00
Model Digital Transistor Relay Power Notes
Inputs Outputs Outputs
XC5-48T-C 28 20 0 20-30VDC 4 High Speed Pulse Outputs

XMP3 DUAL PUMP CONTROLLER

We have programmed our XMP3 PLC to be a Dual Pump Controller. It is suitable for both water and
wastewater applications. It can be used to control the pumps for filling a tank or emptying a wet well.
The units comes with the usual features found with pump controllers and more. The controller fea-
tures

• 1 or 2 pump control.
• pumps can operate in duty/standby or cyclic.
• Can control pumps to fill a tank or empty a well
• Operates with conductive probe, pressure, ultrasonic or any 4-20mA device
• Start pumps by Level sensor, high or low floats or both
• With level sensor operation each pump can have its own start and stop levels
• Switch over to standby pump on overload, runtime fail or no flow fault.
• Times to recognize faults are configurable.
• Can operate a wet well washer
• Start a pump once a day to take advantage of Off Peak Electricity tariffs
• Start a pump after a period of no activity. Useful to prevent wet wells going septic
• Easily configured with the touch screen.

Price Each 1
PMP-001 XMP3 Pump Controller $575.00

Page 58 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PLC OPERATOR PANELS
OP-320A MP330

This low cost display features

A low cost versatile display. Its features
- 3.7 inch monochrome LCD screen
include
- 192 x 64 Pixels
- 3.7-inch, Monochrome Display area
- easily connects to our XC3 and XC5
320*240
PLC's
- 26 function keys, support area
The 20 keys can be defined to be func-
- Numerical Keypad for data entry
tion keys (In which 12 keys can be de-
- Suitable for various PLC's including
fined to be number keys and other us-
our XC3 and XC5 series
age), STN LCD display with back light, can display 24 letters*4 lines
- Password protection and internal clock(Optional)
- Key-press can be defined as function keys, partly replace the me-
General Specifications:
chanical keys in your control cabinet.
• Screen Pixel: 192 × 64
- With backlight STN LCD
• Display Size: 3. 7” LCD
- Using life Up to 20000hrs Ambient temperature 25degC 24 hours
• User Memory: 1MB Flash, 1KB SRAM
operation
• Expected Bulb Life: 20,000 Hours
- Supply Voltage Range DC22V~DC26V
• Function Keys: 10 Numeric Keys: 10
- Supply Current <260mA
• Color: STN LCD with Backlight
- Brightness Can not be adjusted
• Screen Saver: Set by Software, Display Brightness: 60 nits
- Character Size English 8*16 16*32
• Communication Port: RS 232 / RS 485
- Memory Screen 4MB FlashROM
• Real Time Clock: Yes
- Memory Data 2KB SRAM
• Power Input: 24VDC 4W
- Interface Download Port RS232
• Operation Temperature: 0ºC ~ 50ºC
- COM Port RS232 /RS422
• Storage Temperature: -10ºC ~ 60ºC
• Weight: 0.45Kg
Other features include
• Relative Humidity: 20 ~ 85% non-condensing
• Free Software
• IP 65F

Other features include

• Free Software

Price Each 1 Price Each 1

HMI-001 OP320-A Text Display $249.00 HMI-010 MP330 Text Display $299.00

TP562-T Touch Screen Display TPA61-T Touch Screen Display

5.7 inch 256 color TFT 320*240 pixels A 10.4 Inch 800x600pixel touchscreen
4MB FlashROM 4KB SRAM which features:
With data display , data monitor, alarm,
scheme and relevant functions • General specifications:
Support for various popular PLC's and has • Screen pixels: 800 x 600
double separated communication ports • Display size: 10.4in, true TFT color
Easily connects to our XC3 and XC5 PLC's LCD
Its own screen edit software supports simu- • Touch type: resistive touch screen
late offline and simulate online as well as configuration function. • User memory: 8MB flash, 4KB SRAM
• Expected bulb life: up to 50,000 hours
General Specifications: • Touch cells: 768 (32 X 24)
• Screen Pixels: 320 × 240 • Color: 256 true TFT color
• Display Size: 5.7” diagonal TFT color LCD • Screen saver: set by Software
• Touch Type: Resistive Touch Screen • Display brightness: 400nits
• User Memory: 4MB Flash, 2KB SRAM • Communication ports: RS-232, RS-422/485, two USB ports
• Expected Bulb Life: 50,000 Hours • Protocols: Include ASCII and Modbus RTU
• Touch Cells: 192 (16 X 12) • Real time clock: yes
• Color: 256 True TFT Color • Power input: 24 VDC
• Screen Saver: Set by software • Power consumption: 10W
• Display Brightness: 300 nits • Operation temperature: 0-50 degree Celsius
• Communication Ports: RS-232, RS 422 / 485 • Storage temperature: -10-60 Degree Celsius
• Protocols: ASCII and Modbus RTU • Withstand voltages: AC1000V-20mA within one minute
• Real Time Clock: Yes • Noise resistance: 1,000Vp-p noise voltage
• Power Input: 24 VDC • Weight: 4lbs
• Power Consumption: 7.5 W • Relative Humidity: 2-85% non-condensing
• Operation Temperature: 0ºC ~ 50ºC • IP: 65F
• Storage Temperature: -10ºC ~ 60ºC
• Relative Humidity: 20 ~ 85% non-condensing Other features include
• IP 65F • Free Software

Other features include

• Free Software

Price Each 1 Price Each 1

HMI-020 TP562-T 5.7 inch Touchscreen $799.00 HMI-030 TPA61-T 10 inch Touchscreen $1699.00

Page 59 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PLC’S
SL100 Controller

SL100 is a single board programmable logic controller that includes a number of innovative
features. Key features are:
- 8 digital inputs. The inputs can accept relay contacts or NPN open collector.
- 8 digital outputs. The 8 digital outputs are 500mA Darlington transistors capable of
driving small DC solenoid valves or relay coils.
- 1 analog Input can be configured to operate on 0-10V, 0-20mA or as a temperature meas-
uring input (using an external thermistor sensor)
- All external connections are on plug-in connectors for fast final product assembly.
- 1 analog outputs which can generate a 0-10V signal, with a maximum load current of
5mA. The outputs have internal current limiting
- Provision for modem communications
- An extremely flexible range of expansion possibilities

The SL99 programmer is programmed using a basic type language featuring subroutines which has been tailored for control applications.
For program development all you need is our free software, a simple wall cube power supply and a standard RS232 cable.
The SL99 is available one-off as a Developer's Kit, which includes our resources CD and printed materials.

Price Each 1 5+
SPL-010 SL100 Development Kit $164.00 POA
SPL-011 SL100 Controller Board $159.00 POA

MMI 202 Controller

The MMi202 is a single board programmable logic controller that includes a number of innovative features. Key features are:

• 8 digital inputs. The inputs can accept relay contacts or NPN open collector. Input
7 can act as a high speed counter. All other inputs have debouncing
• 8 digital outputs with LED indicators. The digital outputs are open collector type
implemented using the ULN2803, chip.
• 2 versatile analog inputs. Each single ended input can be configured to operate on
0-10V, 0-20mA or as a temperature measuring input (using an external thermistor
sensor)
• 2 analog outputs which can generate a 0-10V signal, with a maximum load current
of 5mA. The outputs have internal current limiting
• Onboard Operator Interface, with support for a liquid crystal display (LCD)
• Provision for modem communications, RS232 connection with Modbus Communi-
cations
• PID control
• An extremely flexible range of expansion possibilities.

The MMi202 has its own inbuilt operator interface. This gives you push buttons, indica-
tors and a beeper to allow interaction with an operator. It also gives you the ability to
tailor the appearance of your end product via a plastic graphical membrane overlay.
The LCD port supports display sizes from 1x16 to 4x20 (our standard offering is 2x16).

The MMi202 is supplied a several different packages. The packages with "DK" in the name are Developer's Kits.

• MMi202DK. This is the board already mounted onto an aluminium front panel and supplied with a universal graphical overlay. It also includes
a set of matching connectors and software on CD;
• MMi202DK216. Like the MMi201DK but with the addition of a 2 line by 16 character Liquid Crystal Display and Real Time Clock;

The MMi202 programmer is programmed using a basic type language featuring subroutines, LCD display control, floating point maths and PID

Price Each 1 5+
SPL-001 MMI202DK Development Kit $259.00 POA
SPL-002 MMI202DK216 Development Kit $359.00 POA

Page 60 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PLC’S
HIO PLC and DISPLAY

The HIO operator panels feature PLC programmability (ladder logic) and I/O together with a text or touch screen display

Features Include
•All features of Prizm LCD Operator Interfaces
•Integrated Digital Inputs and Outputs with optional Analog I/O
•Digital Inputs and Outputs rated for 24 V DC
•Analog Inputs for RTD, Thermocouple, mV and mA. Analog Outputs are 4-20 mA
•Inputs connectable to PLC or used for internal program
•Support for simple ladder logic and analog control HIO005
•Support for high speed counters and timer
•Dual Port Support for connecting to a PLC / Printer / SCADA / Drive
•Common Programming software for the entire HIO family.........FREE!!
•IP65 design. CE and UL certified

The HIO units possess both Prizm (Operator interface) as well as programmable logic features. User can implement logic, specific to application using
standard Ladder programming. The HIO units are incredibly versatile. The HIO has four High speed counters (5 K Hz.), hundreds of timers and
counters, thousands of internal coils, retentive and nonretentive memory and PID functionality. A programming logic task can be programmed for con-
tinuous scanning, or only when a specific screen is showing. User can also include Programmable logic task in power on as well as Global task. The
HIO operator interface functions revolve around Screens and Tasks that can be assigned to keys, screens and application. The HIO can also display
an Alarm condition.

Digital Digital Analog Analog

Model Display Dimensions Part Number
Inputs Outputs Inputs Outputs
128 x 64 px.
HIO005 6 6 1 1 48 x 48 x 76 HIO005-0606-0101-V-B-C-00
(1.25” g*)
Price Each 1
HIO005-0606-0101-V-B-C-00 $249.95

Page 61 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PLC OPERATOR PANELS
Prizm 10 Prizm 50

The Prizm 10 is an economical Key-

The Prizm 50 is an economical Keypad
pad Based Operator Interface which
Based Operator Interface which when
when connected to a PLC can dis-
connected to a PLC can display values
play values of PLC registers and
of PLC registers and messages and
messages and allow data entry into
allow data entry into PLC registers.
PLC registers.
Features include
Features include
• 20 X 4 back lit LCD
• 16 X 2 back lit LCD
• Numeric keys for easy data entry
• 6 function keys with macro functions. 2 LEDs
• 8 function keys with macro functions and LEDs
• Floating point
• Serial port for printing screens, alarms and floating points
• Serial port for printing screens / alarms
• Optional Data Logging function
• Free Windows configuration software
• Free Windows configuration software
• Over 50 PLC's supported
• Over 50 PLC's supported
The user can define actions for 3 events: when the key is pressed, while
The user can define actions for 3 events: when the key is pressed, while
the key is pressed and when the key is released.
the key is pressed and when the key is released.
Multiple tasks can be assigned to a single keystroke making it a power-
Multiple tasks can be assigned to a single keystroke making it a power-
ful tool in the machine control environment. It is also possible to assign
ful tool in the machine control environment. It is also possible to assign
actions for a combination of two keys pressed simultaneously.
actions for a combination of two keys pressed simultaneously.

Price Each 1 Price Each 1

PZM-10-24-B $329.00 PZM-50-24-B $499.00

Prizm 140

The Prizm 140 is an economical mono-

chrome Touch Screen Operator Panel that
is designed for applications where display
of PLC operations and Data entry into PLC
registers is needed in a Graphical Display.

Features include
• 128x64 Pixels Monochrome Graphical
Display
• Two universal serial ports (Dual Port Support) to connect PLC /
Printer / Programming Port
• Direct connection to most controller families including Modbus RTU
• Up to 65535 user definable screens (full size) or pop-up windows
(partial size)
• Real Time clock
• Wizards for rapid application development of standard bitmapped
objects
• Real Time and Historical alarms
• Real time and Historical trending
• Data logging
• Recipes support
• Backlight screen saver
• Windows® based programming software .........FREE!!
• IP65 design, CE / CSA / UL certification

Price Each 1
PZM-140-24-B $549.00

Page 62 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PLC’S AND PERIPHERALS
PROTOCOL GATEWAY

GWY-00 is a Protocol Converter / Data sharer for devices like PLCs, Inverters, Controllers etc. The gate-
way has two serial ports that connect with two different devices. The gateway communicates with a device
to get the information required by the other device.
Our Windows® based Gateway setup software makes it easy to configure the protocol converter. After
choosing which protocol to use for each port, you program the Gateway to transfer the data blocks. Using a
simple spreadsheet format, you simply program the Gateway to fetch a specified number of registers or bits
from one device and transfer them to the other. Powerful software allows you to have all of the information
transfers done continuously or allows the PLC to control which block of data is to be transferred.

Features include
- DIN Rail or Panel Mounted compact Protocol Converter
- DB9 Serial ports in any combination of RS232 / RS422 / 2 or 4 wire RS485 / CMOS
- Connects PLC to PLC or PLC to a Modbus Network (as a Master or Slave)
- Allows data sharing between PLC, Invertors, Controllers and other network devices
- Common model for connecting different devices. Several PLC an Invertors
supported Price Each 1
- Direct connection to the Programming terminal saves additional hardware GWY-000 Serial Gateway $336.00
- Low power consumption of only 2.5 Watts
- Common Programming software for the entire Gateway family.........FREE!!
- CE / CSA with UL certification
LONWORKS GATEWAY

The LonWorks Gateway communicates between LonWorks network interface on one sde and various
serial protocols on the other side (e.g. Modbus ASCII / RTU etc.). It allows LonWorks devices to make
available their LonWorks variables for PLC’s or SCADA. It also makes possible for serial device to act as a
LonWorks node.
Microsoft Windows® based configuration software, Gateway Setup, helps user to configure Gateway unit.
‘Configuration’ means making the Gateway unit work as per the system requirements. The complete con-
figuration for a unit is termed as ‘Project’. Project comprises of device names, Register
addresses, Conditions for block execution etc.

Features Include
- DIN Rail or Panel Mounted compact Protocol Converter
- Hardware with two communication ports COM1: RS232 / RS422 / 2 or 4 wire RS485 / CMOS
- COM2: LonWorks TP FT10 (78 Kbps, free topology)
- Connect your LonWorks device to serial device or vice versa
- Connect your LonWorks device on Modbus Network (as a Master / Slave)
- Same model can be re-configured for connecting different devices
- Supports up to 62 network variables
- Free software for Gateway and SNVT variables configuration!! Price Each 1
- CE with UL certification GWY-100 LonWorks Gateway $385.00

HART GATEWAY

Gateway 800 is a protocol converter as well as the HART modem. This converts the HART digital
signal to a serial communication protocol (e.g. MODBUS). This allows various HART field devices to
interface directly with serial protocol (MODBUS) based monitoring
and control systems. Serial protocol can be master or slave configurable from the set up software. At
the same time it allows to communicate the PC based configuration software with HARTfield devices.
Gateway operates in point to point as well as in multi drop HART network mode.
All HART process information, including primary, second, third and fourth process variable data is
converted to serial protocol
(MODBUS) and available to the host system. Using the Field Device Status Byte data that is avail-
able in HART’s digital information, the gateway can transmit, via serial link, diagnostic data including
smart device configuration changed; primary and non primary variables out of limits; primary variable
analog output fixed; cold start; field device malfunction; and more HART status
data available.

Features Include
- DIN Rail or Panel Mounted compact Single channel HART Gateway Pass Through
- PLC1 Serial port in any combination of RS232 / RS422 / 2 or 4 wire RS485 / CMOS
- Connects HART device to PLC / SCADA or any serial device. In addition allows configuration software to connect HART device.
- Allows data sharing between HART field devices and other network devices
- Allows multidropping of HART devices.
- Transformer isolatation and capacitive coupling for HART devices. This simplifies loop
connection which eliminates Grounding effect.
- Low power consumption Price Each 1
- Common Programming software for the entire Gateway family.........FREE!! GWY-800 HART Gateway $385.00
- CE / CSA with UL certification

Page 63 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PANEL METERS
N1500 Universal Indicator

The N1500 would have to be the best featured budget priced programmable process indicator on the market. Hundreds have been sold
The standard version comes with key panel programmable range, selectable decimal point, universal switching power supply, 24Vdc output for field
transmitters excitation, ultra bright five digit LED display and 2 relay alarms with 6 function options.
Features are
• Accepts type J, K, T, E, N, R, S and B thermocouples; Pt100, 4-20 mA, 0-50 mV and 0-
10 Vdc
• Programmable range from –31000 to +31000 with adjustable filter.
• front panel input of custom created non-linear curve with up to 20 segments. Use
this feature to display volumes in spherical tanks or bullets
• 5 Digit LED display
• Input sampling: up to 20 per second
• Maximum and Minimum Memory
• Peak and Hold Functions
• 2 SPST 3Amp Alarm Relays Price Each ________1_ 5+
• Alarm Relays can be configured for LO, HI, differential, diff. IPI-100 N1500 Universal Process Indicator 24VDC $265.00 $238.50
LO, diff. HI and sensor break IPI-101 N1500 Universal Process Indicator 240VAC $235.00 $210.50
IPI-102 N1500 Process Indicator 240VAC, Analog Out,
• Power required 24VDC/AC or 240VAC RS485, 4 Relays $279.00 $254.00
• Dimensions: 48×96×92mm . IPI-103 N1500G Process Indicator 240VAC, Analog Out,
RS485, Large Digits 60mm High Display $575.00 $517.50
• Work temperature: 0ºC to+55ºC, 35 to 85% humidity.
• Protection rate Front panel: IP65, Rear panel: IP30

Because it has 2 relay contacts you can program it to operate as an ON-OFF Controller and Display unit

Options include 4 to 20mA output for retransmission of measured variable to a recorder or PLC, two extra alarm relays, 1 digital input, RS485 digital
communication interface.

N1500 Load Cell Indicator

N1500 LC is a universal indicator for use with load cells. It accepts a wide variety of electric signals and is suitable for Load Cells with 1mV/V, 2mV/V
and 3mV/V output. A six-digit LED display shows measured value and all programming parameters of the instrument.
Configuration can be entirely made through the keyboard, no circuit changes are required. Selection of input and output types, alarms configuration,
and other special functions are accessed and programmed through the front keypad.

Features include
Input: 4-20mA, 0-20mA, 0-50mV, 0-20mV and –20 to 20mV;
10Vcc power supply for load cells;
Memory for maximum and minimum values;
Hold, peak hold, tare, zero tare and automatic zero functions;
2 SPST 3Amp Alarm Relays (4 Alarm Relays is optional)
Alarm Relays can be configured for LO, HI, differential, diff. LO, diff. HI and sensor break
A Process Variable (PV) retransmission in 0-20mA or 4-20mA comes as standard
Internal resolution: 128000 levels.
Display resolution: 62000 levels (-31000 to 31000);
Sampling rate: 15 samples per second;
Maximum error: 0.15 of the maximum range;
PV retransmission resolution: 4000 levels, max. 550W
Working temperature: 0 to 55°C, humidity 35 to 85%;
Protection rate Frontal panel: IP65
Rear panel: IP30
Dimensions:48×96×92mm
Starndard unit is fitted with 2 alarm relays (4 Relays optional), 4-20mA analog retransmission, RS485 Modbus connection
A Process Variable (PV) retransmission in 0-20mA or 4-20mA comes as standard
Price Each ________1_ 5+
IPI-105 N1500LC Load Cell Indicator 24VDC $399.00 $349.00
IPI-106 N1500 LC Load Cell Indicator 240VAC $399.00 $349.00

Page 64 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PANEL METERS
4 Digit Mini Display Tachometer 4 Digit Mini Programmable 0-20mA Display

This meter can be used to display the RPM This microprocessor controlled meter can
of a engine. It has a programmable scaling be used to display a 4-20mA or 0-20mA
factor which you can divide the pulse source signal in engineering units. The user can
by to correct the reading to engineering set the input value, display value, zero
units. adjustment and the position of the decimal
Features include point. All settings all done by switches
- 4 Digit LED display 0-9999 under the front panel cover. All settings
- Accepts NPN input signals up to approx are saved to nonvolatile memory
1KHz Features include
- adjustable Sampling Time 0.1 to 9.9secs - 4 Digit LED display range -1999 to
- Programmable decimal point position 9999
- Programmable scaling. Range 0.1 to 999.9 - Accepts a 0-20mA or 4-20mA signal
- Power required 12VDC +/-5% 0.5W or 24VDC +/-5% 0.5W - adjustable Sampling Time 0.1 to 9.9secs.
- Dimensions: 48x24x70mm. - Programmable decimal point position
- Work temperature: -10ºC to+55ºC, 35 to 85% humidity - Programmable scaling.
- Signal out of range indication
- Programmable scaling. Range 0.1 to 999.9
- Power required 12VDC +/-5% 0.5W or 24VDC +/-5% 0.5W
- Dimensions: 48x24x70mm.
- Work temperature: -10ºC to+55ºC, 35 to 85% humidity

Price Each 1 Price Each 1

CPM-003 Mini-Type Tachometer/Line Speed Meter 12V powered $129.00 CPM-001 Mini-Type 4-20mA Panel Meter 12VDC Powered $155.00
CPM-004 Mini-Type Tachometer/Line Speed Meter 24V powered $129.00 CPM-002 Mini-Type 4-20mA Panel Meter 24VDC Powered $155.00

N480i Process Indicator Serial LCD Module

This low cost and easy-to-use universal The SerLCD v2.5 module is the latest serial
indicator can be programmed by non- LCD module from Spark Fun Electronics that
experienced users. Full rangeability and a incorporates many new features. The SerLCD
24 Vdc output for remote transmitters are backpack takes care of all the HD44780 com-
standard. mands allowing seamless integration with any
Features Include micro that can communicate over a wide range
- Input: thermocouples J, K, T, N, R, S; of TTL serial baud rates. The SerLCD v2.5 has
Pt100, 50 mV, 10V and 4-20mA the ability to drive up to 1A directly for back-
- Programmable range from -1999 to light control or as a general purpose high-
+9999 power control pin.
- 2 relay alarms
- Alarm functions: LO, HI, differential, diff. HI, differential LO and broken SerLCD v2.5 currently supports 16 and 20 character wide screens with
sensor. 2 or 4 lines of display. Contrast control is implemented through a trim pot
- Power: 100-240 Vac/dc or 24 Vdc/ac on the module. Comes with 3-pin screw terminal shown on right.
- option 1 relay alarm can be replaced with 24 Vdc output excitation for
transmitters (only on 240VAC model) Features:
- Detects any sensor failure. * Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200
- Easy to use programming menu makes operator interface a snap. and 38400
- Front panel: IP65, Polycarbonate UL94 V-2. * Operational Backspace
- Back panel: IP30, ABS + PC UL94 V-0.
- Dimensions: 48 x 48 x 106 mm Price Each 1 5+
LCD-001 Serial LCD Module $24.00 $21.60

Price Each 1
IPI-120 N480i Process Indicator 24VDC Power 2 Relays $159.00
IPI-121 N480i Process Indicator 240VAC Power 2 Relays $159.00
IPI-122 N480i Process Indicator 240VAC Power 1 Relay 24VDC out $159.00

Page 65 Ocean Controls Catalog 2008

 OCEAN CONTROLS - PANEL METERS
Serial LCD Module Basic 16x2 Character LCD STN - Black on Green

The SerLCD v2.5 module is the latest serial This is a basic 16 character by
LCD module from Spark Fun Electronics that 2 line display. Black text on
incorporates many new features. The SerLCD Green background. Utilizes the
backpack takes care of all the HD44780 com- extremely common HD44780
mands allowing seamless integration with any parallel interface chipset
micro that can communicate over a wide range (datasheet). Interface code is
of TTL serial baud rates. The SerLCD v2.5 has freely available. You will need
the ability to drive up to 1A directly for back- ~11 general I/O pins to inter-
light control or as a general purpose high- face to this LCD screen. In-
power control pin. cludes LED backlight. Works
with our LCD Serial Module.
SerLCD v2.5 currently supports 16 and 20 character wide screens with
2 or 4 lines of display. Contrast control is implemented through a trim pot Price Each 1 5+
on the module. Comes with 3-pin screw terminal shown on right. LCD-002 16x2 Basic LCD Black on Green $18.00 $16.20
Features:
* Adjustable baud rates of 2400, 4800, 9600 (default), 14400, 19200 Basic 20x4 Character LCD Balck on Green
and 38400
* Operational Backspace This is a basic 20 character by 4 line display.
Utilizes the extremely common HD44780
Price Each 1 5+ parallel interface chipset (datasheet). Inter-
LCD-001 Serial LCD Module $24.00 $21.60 face code is freely available. You will need
~11 general I/O pins to interface to this LCD
Basic 16x2 Character LCD FSTN - White on Black screen. Includes LED backlight. Works with
our LCD Serial Module
This is a basic 16 character by 2 line display with
a snazzy black background with white charac-
ters. Utilizes the extremely common HD44780
parallel interface chipset (datasheet). Interface Price Each 1 5+
code is freely available. You will need ~11 gen- LCD-022 20x4 Basic LCD White on Black $27.00 $24.30
eral I/O pins to interface to this LCD screen.
Includes white LED backlight. Works with our Color LCD 128x128 with carrier board
LCD Serial Module.
Description: Finally! Color LCDs you can afford
and play with! What SFE found over in China
is a 'copy' of the Nokia LCD found in models
6100, 6610, 7210, 7250, and 5100? We don't
know what phones it fits, and we don't really
Price Each 1 5+ care. This inexpensive LCD comes with a pow-
LCD-011 16x2 Basic LCD White on Black $21.00 $18.90 erful white LED backlight and a relatively sim-
ple serial interface. It's a 9-bit interface, so
beware. But we were able to get the LCD up
and running on a LPC2138 with a few hours
worth of work.
Please note: Comes with a carrier board so
you can easily interface to the LCD
Frame Dimensions: 1.35x1.58"
Active Display Dimensions: 1.2"x1.2"
Features:
* LCD Logic - 3.3V @ 2-3mA
* LED Backlight - 7V @ 40-50mA (very bright)
* Full 4,096 Color Display
* Uses the Epson S1D15G10 Compatible Controller

Price Each 1 5+
LCD-050 Color LCD and Carrier Board $49.50 $44.55

Page 66 Ocean Controls Catalog 2008

 OCEAN CONTROLS - SIGNAL CONDITIONERS
Programmable Non Isolated TxBlock Programmable Non Isolated TxRail

The TxBlock is a programmable head mount 4-20mA temperature trans- The TxRail is a programmable DIN rail mount 4-20mA
mitters. One single model can be configured to accept several thermo- temperature transmitters. One single model can be
couple types and Pt100 RTD. output. configured to accept several thermocouple types and
Pt100 RTD. output.
Specifications
Programmable input: thermocouples type Specifications
J,K,T,N,E,R,S,B, and Pt100 RTD Programmable input: thermocouples type
2-wire loop powered 4-20mA output J,K,T,N,E,R,S,B, and Pt100 RTD
Power supply: 12 to 30 Vdc. 2-wire loop powered 4-20mA output (Option 0-10V
Linearized output and cold junction compensation for output)
thermocouples. Power supply: 12 to 30 Vdc.
2 or 3-wire Pt100 with linearization Linearized output and cold junction compensation for thermocouples.
Accuracy: +-0.2% full scale for Pt100 and 0.3% max. of FS for thermo- 2 or 3-wire Pt100 with linearization
couples. Accuracy: +-0.2% full scale for Pt100 and 0.3% max. of FS for thermo-
Programmable working range. We can program it for you at no charge couples.
Programmable working range. We can program it for you at no charge
Price Each 1
SIG-001 TxBlock Non Isolated Head Mount Transmitter $89.00
Price Each 1
SIG-007 TxConfig PC Interface and Configurator Software $89.00
SIG-002 TxRail Non Isolated DIN Mount 4-20mA $99.00
SIG-003 TxRail Non Isolated DIN Mount 0-10V $99.00
SIG-007 TxConfig PC Interface and Configurator Software $89.00

Programmable Isolated TxBlock Programmable Isolated TxRail

The TxBlock is a programmable head mount 4-20mA The TxRail is a programmable DIN rail 4-20mA temperature transmit-
temperature transmitters. One single model can be con- ters. One single model can be configured to accept
figured to accept several thermocouple types and Pt100 several thermocouple types and Pt100 RTD. output.
RTD. output.
Specifications
Specifications Programmable input: thermocouples type
Programmable input: thermocouples type J,K,T,N,E,R,S,B, and Pt100 RTD
J,K,T,N,E,R,S,B, and Pt100 RTD 2-wire loop powered 4-20mA output (Option 0-10V
2-wire loop powered 4-20mA output output)
Power supply: 12 to 30 Vdc. Power supply: 12 to 30 Vdc.
Linearized output and cold junction compensation for thermocouples. Linearized output and cold junction compensation for
2 or 3-wire Pt100 with linearization thermocouples.
Accuracy: ±0.15% full scale for Pt100 and 0-50mV and 0.25% max. of 2 or 3-wire Pt100 with linearization
full scale ±1ºC for thermocouples. Accuracy: ±0.15% full scale for Pt100 and 0-50mV and 0.25% max. of
Isolation: 1500Vac between sensor input and 4-20mA output loop. full scale ±1ºC for thermocouples.
Programmable working range. We can program it for you at no charge Isolation: 1500Vac between sensor input and 4-20mA output loop.
Programmable working range. We can program it for you at no charge
Price Each 1 Price Each 1
SIG-004 TxBlock Isolated Head Mount Transmitter $139.00 SIG-005 TxRail Isolated DIN Mount 4-20mA $139.00
SIG-007 TxConfig PC Interface and Configurator Software $89.00 SIG-006 TxRail Isolated DIN Mount 0-10V $139.00
SIG-007 TxConfig PC Interface and Configurator Software $89.00
Frequency to Analog Converter with 2 Alarms
Dual Frequency to Analog Converter

Our frequency to analog converter allows

you to convert the frequency of a pulse Our Dual frequency to analog converter
stream to an analog voltage 0 to 10V or 4- allows you to easily convert up to two fre-
20mA. quency signal streams to an analog voltage
The converter has a RS232 serial port signal
9600 baud which allows you to configure
the card and read the frequency using the The KTA-245 is not designed for unlimited
popular Modbus protocol. The configura- frequencies but for most applications it is
tion is automatically saved to EEPROM suitable. 60KHz is combined maximum frequency of the two frequency
so your configuration will be retained in inputs. ie. If channel 1 is 60KHz you cannot use channel 2, but if chan-
the event of power loss nel 1 is 40KHz the maximum for channel 2 is 20KHz. Realistically, most
Two on board relays can be used as signals will be in the 10KHz or below range.
alarm contacts if the frequency rises To set up the two ranges of the analog outputs there are four switch
above or falls below set limits. blocks on the PCB. A rotary switch sets the base frequency and a dual
Frequency range is 5 to 10KHz or 5 to 65000RPM. DIP switch sets the multiplier
The pulse stream can be 0 to 5V signal or a NPN signal. For ease of installation, the KTA-245 unit can be supplied with DIN rail
12 to 15VDC powered. mounting clips, this has part number KTD-245.
The converter can be DIN rail mounted. .
Measures 107(L) x 87(W) x 24(H)mm Measures 72(L) x 65(W) x 24(H)mm

Price Each 1 5+
Price Each 1 5+
KTA-245 Dual Freq to Volt Converter $99.00 POA
KTA-215 Frequency to Analog Converter Assembled $104.50 POA
KTD-245 Dual Freq to Volt Converter $129.00 POA
Page 67 Ocean Controls Catalog 2008
 OCEAN CONTROLS - SENSORS
QL-1805 DC Square Proximity Switch QL-1808 DC Square Proximity
Proximity switch inductive NPN Proximity switch inductive NPN
or PNP rectangular shape or PNP rectangular shape
Dimensions 36 x 18 x 18mm Dimensions 36 x 18 x 18mm
Secure Sensing Range 0-4mm Secure Sensing Range 0-8mm
Suitable for Limit/Speed Suitable for Limit/Speed
Switches Switches
Supply Voltage 10-30VDC Supply Voltage 10-30VDC
Voltage Drop <=1.5V Voltage Drop <=1.5V
Degree of Protection IP67 Degree of Protection IP67
Maximum Output Current 150mA Maximum Output Current 150mA
Power Absorbed <10mA Power Absorbed <10mA
Operating Frequency 600Hz Operating Frequency 200Hz
Temperature/Humidity -20 to +70degC/ 35 to 95%RH Temperature/Humidity -20 to +70degC/ 35 to 95%RH
Price Each 1 5+ Price Each 1 5+
PXS-001 DC Proximity Switch QL-1805NA NPN $22.50 POA PXS-003 DC Proximity Switch QL-1808NA NPN $25.00 POA
PXS-002 DC Proximity Switch QL-1805PA PNP $22.50 POA PXS-004 DC Proximity Switch QL-1808NA PNP $25.00 POA

TS-0802 Tubular Proximity Switch TS-1204 Tubular Proximity Switch

Proximity switch inductive tubular shape Proximity switch inductive tubular

Dimensions 8mm Dia x 40mm Long shape
Secure Sensing Range 0-1.6mm Dimensions 12mm Dia x 40mm Long
Suitable for Limit/Speed Switches Secure Sensing Range 0-3.2mm
Supply Voltage 10-30VDC Suitable for Limit/Speed Switches
Degree of Protection IP67 Supply Voltage 10-30VDC
Maximum Output Current 150mA Degree of Protection IP67
Power Absorbed <10mA Maximum Output Current 150mA
Voltage Drop <=1.5V Power Absorbed <10mA
Operating Frequency 1KHz Voltage Drop <=1.5V
Temperature/Humidity -20 to +70degC/ 35 to 95%RH Operating Frequency 600Hz
Temperature/Humidity -20 to +70degC/ 35 to 95%RH

Price Each 1 5+ Price Each 1 5+

PXS-100 Tube Proximity Switch TS-0802NA NPN $44.50 POA PXS-104 Tube Proximity Switch TS-1204NA NPN $39.00 POA
PXS-101 Tube Proximity Switch TS-0802PA PNP $44.50 POA PXS-105 Tube Proximity Switch TS-1204PA PNP $39.00 POA

TS-1805 Tubular Proximity Switch TS-1808 Tubular Proximity Switch

Proximity switch inductive NPN or Proximity switch inductive NPN

PNP tubular shape or PNP tubular shape
Dimensions 18mm Dia x 40mm Dimensions 18mm Dia x 40mm
Long Long
Secure Sensing Range 0-4mm Secure Sensing Range 0-6.4mm
Suitable for Limit/Speed Switches Suitable for Limit/Speed
Supply Voltage 10-30VDC Switches
Voltage Drop <=1.5V Supply Voltage 10-30VDC
Power Absorbed <10mA Voltage Drop <=1.5V
Degree of Protection IP67 Power Absorbed <10mA
Maximum Output Current 150mA Degree of Protection IP67
Operating Frequency 600Hz Maximum Output Current 150mA
Temperature/Humidity -20 to +70degC/ 35 to 95%RH Operating Frequency 200Hz
Temperature/Humidity -20 to +70degC/ 35 to 95%RH
Price Each 1 5+
PXS-110 Tube Proximity Switch TS-1805NA NPN $39.00 POA Price Each 1 5+
PXS-111 Tube Proximity Switch TS-1805PA PNP $39.00 POA PXS-116 Tube Proximity Switch TS-1808NA NPN $39.00 POA
PXS-117 Tube Proximity Switch TS-1808PA PNP $39.00 POA

Page 68 Ocean Controls Catalog 2008

 OCEAN CONTROLS - SENSORS
LS18D-40P Tubular IR Photo Electric Switch
TS-3015 Tubular Proximity Switch
Transistor Output PNP
Proximity switch inductive NPN Output Mode switchable "Light On" or
or PNP tubular shape "Dark On"
Dimensions 30mm Dia x 40mm Diffuse Reflection Type
Long Dimensions 18mmDia x 68mm Long
Secure Sensing Range 0-12mm Detecting Distance 0-40cm(10x10cm
Suitable for Limit/Speed white paper with no reflection)
Switches Supply Voltage 10-30VDC
Supply Voltage 10-30VDC Power Consumption 15mA max
Degree of Protection IP67 Maximum Output Current 100mA at 24VDC
Maximum Output Current 150mA Voltage Drop <=1.5V
Power Absorbed <10mA Detecting Delay Time 2ms
Voltage Drop <=1.5V Degree of Protection IP66
Operating Frequency 100Hz Temperature/Humidity -25 to +50degC/ 35 to 85%RH
Temperature/Humidity -20 to +70degC/ 35 to 95%RH

Price Each 1 5+
PXS-112 Tube Proximity Switch TS-3015NA NPN $49.00 POA Price Each 1 5+
PXS-113 Tube Proximity Switch TS-3015PA PNP $49.00 POA PES-001 Photo Electric Switch LS18D-40P $44.50 POA

LS18R-300P Tubular IR Photo Electric Switch

LS3-1MD IR Photo Electric Switch
Transistor Output PNP
Output Mode switchable "Light On" Diffused Reflection Switch with Re-
or "Dark On" lay Output
Reflection Type with Reflector Dimensions 50mm x 55mm x 21mm
Dimensions 18mmDia x 68mm Long Detecting Distance 0-100cm
Detecting Distance 0.1-3m Detects Transparent/Opaque Ob-
Supply Voltage 10-30VDC jects
Power Consumption 15mA max Supply Voltage 12-240VDC 24-
Maximum Output Current 100mA at 24VDC 240VAC
Voltage Drop <=1.5V Degree of Protection IP54
Detecting Delay Time 2ms Relay Output 250V/5A
Degree of Protection IP66 Power Absorbed <2W
Temperature/Humidity -25 to +50degC/ 35 to 85%RH Temperature/Humidity -25 to +50degC/ 35 to 85%RH

Price Each 1 5+
PES-003 Photo Electric Switch LS3-1MD $67.50 POA

Price Each 1 5+
PES-002 Photo Electric Switch LS18R-300P $52.50 POA

LS3-3MR IR Photo Electric Switch LS18-15MT IR Photo Electric Switch

Retro-Reflection Switch with Relay Through Beam - Consist of trans-

Output mitter LS18T-1500X and detector
Dimensions 50mm x 55mm x 21mm LS18T-1500N with NPN Output
Detecting Distance 0.1-3m Dimensions 18mmDia x 68mm
Detects Opaque Objects (4.5cm min.) Long
Supply Voltage 12-240VDC 24-240VAC Detecting Distance 0.1-15m
Degree of Protection IP54 Detects Opaque Objects (1cm
Relay Output 250V/5A min.)
Power Absorbed <2W Supply Voltage 12-24VDC
Temperature/Humidity -25 to +50degC/ 35 to 85%RH Power Consumption 40mA Max
Degree of Protection IP54
Price Each 1 5+ NPN Output 100mA
Temperature/Humidity -25 to +55degC/ 35 to 85%RH
PES-004 Photo Electric Switch LS3-3MR $72.50 POA
Mounting Brackets included

Price Each 1 5+
PES-005 Photo Electric Switch LS18-15MT $95.00 POA

Page 69 Ocean Controls Catalog 2008

 OCEAN CONTROLS - SENSORS
PCB or Chassis Mount Photo Interrupter Industrial Grade Photo Interrupter

This device enables you to turn off a circuit on and off optically. It This Photo Interrupter is suited for Indus-
consists of an IR LED facing a phototransistor across and air gap. trial Use. Fully sealed it is easily mounted
Any object in the gap will interrupt the with 2 supplied screws. Features are
IR beam and consequently switch the Supply Voltage 12-24VDC
phototransistor on and off. The device Current Consumption 18mA Max
is very fast and ideal for counting, tim- Frequency of Response 2KHz
ing or sensing. Output NPN Transistor 100mA MAX
Degree of Protection IP66
Block Measures 25Lx5Wx13H Temperature/Humidity -25 to +55degC/
Gap measure 3mm 35 to 85%RH
Mounting Holes 3.2mm Dia Price Each 1 5+
PES-011 Photo Interrupter Switch PU-08 $29.00 $26.10

Price Each 1 5+
PES-010 Photo Interrupter Component Switch $5.50 $4.95 Lever Actuated Microswitch

Ultrasonic Range Finder Specifications:

Switch Type: SPDT Momentary
The MaxSonar-EZ0 and EZ1 are sonar Contact Rating: 6A @ 250V AC
range finders that offer very short- to long- Contact Resistance: <15mR
range detection and ranging in an incredi- Actuator Length: 27mm
bly small package with ultra-low power
consumption. The MaxSonar detects ob- Long Lever Length:51mm
jects from 0 inches to 254 inches (6.45
Price Each 1 5+
meters) and provides sonar range informa-
LSW-001 Lever Acuated Microswitch $3.10 $2.70
tion from 6 inches out to 254 inches with 1-
LSW-002 Long Lever Acuated Microswitch $3.10 $2.70
inch resolution. Objects between 0 inches
and 6 inches range as 6 inches. The interface output formats included
are pulse width output, analog voltage output, and asynchronous serial Float Switch
digital output. The LV-MaxSonar-EZ0 differs from the LV-MaxSonar-
EZ1 in beam shape and sensitivity; the EZ0 has the most sensitivity of
the MaxSonar product line, yielding a controlled wide beam with high Fully immersible. Ideal for water tank systems
sensitivity. such as rain or waste water management,
Specifications and Features activating boat bilge pumps etc. Can be used
Small and light: 0.870" x 0.785" x 0.645", 4.3 grams to control pumps or electric valves when liquid
Long range detection: 0 - 254 inches (6.45 meters) levels change. Features a waterproof mem-
No deadband (detections from 0 to 6 inches are output as 6 inches) brane which mounts on the inside of the tank.
1-inch resolution
Low typical current consumption: 2 mA Specifications:
Runs on 5 V +/- 0.5 V Switch type: SPST
42 kHz ultrasonic sensor, 20 Hz reading rate Switching current: 0.5A DC
Free-run or triggered operation Contact rating 1.5A @ 200VDC (Max)
Contact resistance: 100m?
Price Each 1 5+ Insulation restistance: >10^10 ?
POL-723 Ultrasonic Range Finder $38.82 less 10% Magnetic sensitivity: 20 - 50 AT
POL-725 Ultrasonic Range Finder $38.82 less 10%
Price Each 1
LSW-010 Horizontal Mount Float Switch $27.23
LSW-011 Vertical Mount Float Switch $18.14
PIR Motion Sensor

This is a simple to use motion sensor. Power it PIR Motion Sensor

up and wait 1-2 seconds for the sensor to get a
snapshot of the still room. If anything moves Easy to install PIR with dual look down detection.
after that period, the 'alarm' pin will go low. Features excellent temperature compensation and
selectable pulse count. Its stylish countoured shape
Red wire is power (5 to 12V). Brown wire is GND. Black wire is open virtually disappears once installed into the corner of
collector Alarm. any room.

This unit works great from 5 to 12V (datasheet shows 12V). You can Vertical range is adjustable and a high quality
also install a jumper wire past the 5V regulator on board to make this noise reduction circuit ensures reliable detection. Superior RFI/EMI
unit work at 3.3V. Sensor uses 1.6mA@3.3V. immunity.

The alarm pin is an open collector meaning you will need a pull up re- Specifications:
sistor on the alarm pin. The open drain setup allows multiple motion Power supply: 9-16V
sensors to be connected on a single input pin. If any of the motion sen- Current drain: NO 8mA @ 12V DC
sors go off, the input pin will be pulled low. Alarm period: 1.5-2.5 sec
Alarm output: NC/NO, 30VDC, 0.2A
Price Each 1 Price Each 1
PIR-001 PIR Motion Detector $12.95 PIR-005 PIR Motion Detector $27.23

Page 70 Ocean Controls Catalog 2008

 OCEAN CONTROLS - SENSORS
Beambar Security Sensor

The Beambar 4 is a multiple infrared Beam device for short range internal use. Four time multiplexed beams are ar-
ranged with a separation of 75mm, an alarm being generated if two adjacent beams are broken. Its unique expansion
capability allows a complete barrier of almost limitless height to be formed by stacking units together. Such a barrier
provides a tightly controlled detection area with a very high probability of detection. The Beambar 4 is housed in a white
ABS box 300mm long x 44mm wide x 254mm deep, allowing a very compact and attractive installation. Additional fixings
are provided which permit a wide range of installation options. Installation is facilitated by the provision of several fea-
tures such as test LEDs for each beam, automatic gain reduction during installation, and environmental outputs are pro-
vided which will warn of impending problems.

Price Each 1 5
NET-040 Beam Bar 4 $159.00 $143.00

Temperature and Humidity Transmitter Wall Mount Temperature and Humidity Transmitter Duct Mount
The Relative Humidity and Temperature Transmitters RHT-DM are mi- The Relative Humidity and Temperature Transmitters RHT-DM are mi-
croprocessed based instruments that incorporate high accurate and croprocessed based instruments that incorporate high accurate and
stable sensors whose information is converted to linear 4-20 mA. stable sensors whose information is converted to linear 4-20 mA. They
The transmitter parameters can be configured to tailor a particular appli- are suitable for mounting in air
cation. conditioning ducts
Specifications Using the digital communication
Loop powered 4-20 mA outputs. interface, the transmitter parame-
Power supply: 12 to 30 Vdc ters can be configured to tailor a
Channel isolation: the 4-20 mA particular application.
outputs are isolated from each
other. Specifications
Reverse polarity protection: YES. Loop powered 4-20 mA outputs.
Cable entrance: compress fitting Power supply: 12 to 30 Vdc
PG7.
Operating limits:
Operating limits: Sensor and probe (RHT-DM): -20 to 80 °C, 0 to 100 %RH.
Sensor and probe (RHT-DM): -20 to 80 °C, 0 to 100 %RH. Electronic circuit: -10 to +65 °C, 0 to 95 %RH.
Electronic circuit: -10 to +65 °C, 0 to 95 %RH. RH channel:
RH channel: Accuracy: ±1,5 %RH @ 25 °C, from 20 to 80 %RH.
Accuracy: ±1,5 %RH @ 25 °C, from 20 to 80 %RH. Repeatability: ±1% RH.
Repeatability: ±1% RH. Hysteresis: ±1% RH.
Hysteresis: ±1% RH. Span: any value between 0 and 100% RH or –40 to 100°C
Span: any value between 0 and 100% RH or –40 to 100°C for
dew point.
Price Each ________ 1
Price Each ________ 1 RHT-004 Duct Temp and Humidity Sensor 4-20mA 150mm Probe $225.00
RHT-003 Temperature and Humidity Sensor 4-20mA output $209.00 RHT-005 Duct Temp and Humidity Sensor 4-20mA 250mm Probe $225.00
RHT-006 Temperature and Humidity Sensor 0-10V output $209.00

Temperature Transmitter Wall Mount Temperature Probes

The Relative Humidity and Temperature Transmitters An inexpensive and easy to use temperature
Temp-DM are microprocessed based instruments that probe. Designed to work with a LabJack, but
incorporate high accurate and stable sensors whose can also be used with any voltage measuring
information is converted to linear 4-20 mA. device. Outputs 10 mV per degree C, and
The transmitter parameters can be configured to tailor a has a range of -40 to +100 degrees C.
particular application.
Specifications
Temperature: A stainless steel easy to use, very accurate, and
Accuracy: 0,5 °C @ 25 °C. waterproof temperature probe The sensor is
Repeatibility: ±0,1 °C. mounted in a stainless steel sheath and features a
Range: programmable between -50 and 120 °C high-level linear output of 10 mV per degree F,
(please check operational limits). typical accuracy of +/-0.25 degrees C ( +/-0.4 de-
Response Time: up to 30 s in fairly still air. grees F) at room temperature, and a range of 0 to
- Operational limits: +300 degrees F (-17 to +150 degrees C).
Electronic module(WM-DM): -20 to +65 °C, 0 to 95% RH;
Sensor and Probe (DM): -40 to +100 °C.
Price Each 1 5+
Note: When measuring temperatures higher than +65 °C or lower than -
LAJ-003 Temperature Probe $59.00 POA
20 °C, only 50% of the probe total length must be inserted into the
LAJ-006 Stainless Steel Temperature Probe $95.00 POA
measured environment.
Power:
- 12 to 30 Vdc (model 4-20 mA);
- 18 to 30 Vdc (model 0-10 V). Cable input: PG7 cable gland.
Output:
Price Each ________ 1
- Two-wire loop powered 4-20 mA or 20-4 mA.
RHT-020 TEMP-WM TemperatureSensor 4-20mA output $135.00
- Voltage output: 0-10 Vdc or 10-0 Vdc (optional).
RHT-021 TEMP-WM TemperatureSensor 0-10V output $135.00
RHT-022 TEMP-DM Duct Temp Sensor 4-20mA 150mm $155.00
RHT-024 TEMP-DM Duct Temp Sensor 4-20mA 250mm $159.00

Page 71 Ocean Controls Catalog 2008

 OCEAN CONTROLS - SENSORS
GS-4200 Pressure Sensors Price Each 1
PRT-001 Ellison GS4200 -1 to 0 Bar Vacuum $459.00
The Ellison Sensors GS4200 series pressure PRT-002 Ellison GS4200 0 to 500 mBar (50KPa, 7.3PSI) $459.00
transmitter is designed for demanding appli- PRT-003 Ellison GS4200 0 to 1 Bar (100KPa, 14.7PSI) $399.00
cations where reliable pressure measurement PRT-004 Ellison GS4200 0 to 1.6 Bar (160KPa, 23PSI) $399.00
is required and where good quality, fast deliv- PRT-005 Ellison GS4200 0 to 2.5 Bar (250KPa, 36PSI) $399.00
ery and low cost are high priority. PRT-006 Ellison GS4200 0 to 4 Bar (400KPa, 58PSI) $399.00
PRT-007 Ellison GS4200 0 to 6 Bar (600KPa, 86PSI) $399.00
The GS4200 is the latest addition to the Elli- PRT-008 Ellison GS4200 0 to 10 Bar (1MPa, 147PSI) $399.00
son Sensors range, offering outstanding per- PRT-009 Ellison GS4200 0 to 16 Bar (1.6MPa, 230PSI) $399.00
formance due to a unique “Silicon On Sap- PRT-010 Ellison GS4200 0 to 25 Bar (2.5MPa, 360PSI) $399.00
phire” diaphragm construction giving excellent PRT-011 Ellison GS4200 0 to 40 Bar (4.0MPa, 580PSI) $399.00
stability over a wide temperature range. Accu- PRT-012 Ellison GS4200 0 to 60 Bar (6.0MPa, 860PSI) $399.00
racy of +/-0.25% with an over pressure limit of PRT-013 Ellison GS4200 0 to 100 Bar (10MPa, 1470PSI) $399.00
twice nominal pressure, together with an output of 4-20mA, wide operat- PRT-014 Ellison GS4200 0 to 160 Bar (16MPa, 2300PSI) $399.00
ing temp range –40 to +80degC and adjustable zero & span for ease of PRT-015 Ellison GS4200 0 to 250 Bar (25MPa, 3600PSI) $399.00
calibration. All models are supplied with ¼” BSP thread process connec- PRT-016 Ellison GS4200 0 to 400 Bar (40MPa, 5800PSI) $399.00
tion and a large DIN43650 Plug for electrical connection. The titanium PRT-017 Ellison GS4200 0 to 600 Bar (60MPa, 8600PSI) $399.00
pressure ports and stainless steel body offer high level of corrosion PRT-018 Ellison GS4200 0 to 1000 Bar (100MPa) $399.00
resistance with the overall transducer having an IP65 environmental PRT-019 Ellison GS4200 0 to 1500 Bar (150MPa) $399.00
rating.

PR-3850 Pressure Sensors with Flush Diaphragm

The Ellison Sensors PR3850 series flush Price Each 1

diaphragm pressure transmitter is designed PRT-035 Ellison PR3850 0 to 2.5 Bar (250KPa, 36PSI) $485.00
for demanding applications where the proc- PRT-036 Ellison PR3850 0 to 4 Bar (400KPa, 58PSI) $485.00
ess media is unsuitable for direct contact with PRT-037 Ellison PR3850 0 to 6 Bar (600KPa, 86PSI) $485.00
the transducer diaphragm (slurries etc). PRT-038 Ellison PR3850 0 to 10 Bar (1MPa, 147PSI) $485.00
PRT-039 Ellison PR3850 0 to 16 Bar (1.6MPa, 230PSI) $485.00
The series features high accuracy together PRT-040 Ellison PR3850 0 to 25 Bar (2.5MPa, 360PSI) $485.00
with an output of 4-20mA and adjustable zero PRT-041 Ellison PR3850 0 to 40 Bar (4.0MPa, 580PSI) $485.00
& span for ease of calibration. All models are PRT-042 Ellison PR3850 0 to 60 Bar (6.0MPa, 860PSI) $485.00
supplied with ½" BSP thread process con- PRT-043 Ellison PR3850 0 to 100 Bar (10MPa, 1470PSI) $485.00
nection (optional 1" BSP) and a large PRT-044 Ellison PR3850 0 to 160 Bar (16MPa, 2300PSI) $485.00
DIN43650 Plug for electrical connection. The PRT-045 Ellison PR3850 0 to 250 Bar (25MPa, 3600PSI) $485.00
fully 316 stainless steel body offer high level PRT-046 Ellison PR3850 0 to 400 Bar (40MPa, 5800PSI) $485.00
of corrosion resistance with the overall transducer having an IP65 envi- PRT-047 Ellison PR3850 0 to 600 Bar (60MPa, 8600PSI) $485.00
ronmental rating. Other features include can operate in ambient tem- PRT-048 Ellison PR3850 0 to 1000 Bar (100MPa) $485.00
perature of –40 to +90degC and media temperature of –20 to +85degC PRT-049 Ellison PR3850 0 to 1500 Bar (150MPa) $485.00

Applications for the PR3850 series include the continuous monitoring of

SCP1000 Barometric Pressure Board
PM1000 Plug In Transducer Display
Please note: This is the ASIC rev B (IC label
The PM1000 Series is universal plug-on LED 'P01'). The SCP1000 is the very first absolute
display suitable for use with various transmit- pressure sensor on the market to use MEMs
ters having a 4-20mA output and fitted with technology to grant 17-bit resolution. Under
DIN43650 connector. The Plug in display sim- ideal conditions, this sensor can detect the
ply fits between the plug and socket on any pressure difference within a 9cm column of air.
DIN43650 connector, it is supplied from the 4-
20mA current loop signal of the transmitter. No VTI's SCP1000-D01 digital absolute pressure
additional power is required. The unit is user sensors are intended for barometric pressure measurement and altime-
programmable from two buttons behind the ter applications for 30kPa...120kPa and -20°C...70°C measuring ranges.
front panel enabling scaling, decimal point posi- The pressure and temperature output data is calibrated and compen-
tion and adjustment of the set point position. All sated internally and the communication between the SCP1000 and its
are easily set through the menu steps outputted host micro-controller is realized using an SPI interface.
to the LED display and stored in an EEPROM,
the programme is not lost in the event of power Four user selectable measuring modes combine 17-bit resolution (9cm
failure. The display can be rotated through 90 of air column) with low or ultra-low power consumption, or alternatively
degree steps for use in different installation 15-bit resolution (18cm of air column) with high speed data read (9Hz) or
positions. The integral open-collector output on less than 5µA and power consumption. For example, at Low Power
the PM1001 model allows the transmitter to be mode, the SCP1000 has an overall resolution of 2 Pa (15cm of air col-
retrofitted easily with a limit contact set point, umn) and a power consumption of 3.5µA.
for use as an alarm or controller. Intrinsically safe models available This unit comes in a newly developed RoHS compliant plastic housing.
certified to EEx ib IIC T4 Normal hot-air rework will destroy this sensor so we highly recommend
this breakout board for prototyping.
Price Each 1
- 3V single supply operation
PRT-050 3.5 Digit LED Plug-On Display $299.00
PRT-051 3.5 Digit LED Plug-On Display with alarm point $399.00 Price Each 1 5+
BPS-001 SCP-1000 Barometric Pressure Sensor $64.95 $58.45

Page 72 Ocean Controls Catalog 2008

 OCEAN CONTROLS - SENSORS
Barometric Pressure Board - HP03D Accelerometer Breakout Board - ADXL202JE +/-2g

The The HP03D is a high accuracy, low- Breakout board for the Analog Devices accel-
cost pressure sensor, ideal for use with erometers in the E8 package. The ADXL is a
weather stations, altimeters and pressure solid state MEMS accelerometer with digital
measurement. The unit comprises a piezo PWM or Analog output. The ADXL can meas-
resistive pressure sensor and a 16 bit ADC ure both static and dynamic acceleration.
with 15-Bit accuracy together with a meas- This means the ADXL is suited well for sens-
urement accuracy of 0.5hpa. Easy to inter- ing tilt (used in many Glove / Air Mouse appli-
face to any microcontroller with a standard cations) and for sensing brute acceleration
I²C interface. The unit requires only 3V and (rocketry and general motion sensing applica-
full installation instructions are available in the datasheet link below. tions).
Features
• Pressure Range 300-1100hpa • 16 Bit ADC Board comes fully assembled and tested with selected sensor, 0.1uF
• I²C Serial Interface • Accurate to 0.5hpa filtering capacitors, and 1MOhm pulse width resistor (where required).
• Supply Voltage: 2.2 - 3.6V
Installed Sensor: ADXL202 +/-2g (PWM and Analog)
Price Each 1 5+
BPS-010 Barometric Pressure Sensor HP03D $22.50 $20.25 Price Each 1 5+
ACC-001 Accelerometer Board - ADXL202JE +/-2g $55.00 $49.50

Accelerometer Breakout Board -

Breakout board for the Analog Devices acceler- Accelerometer Breakout Board - ADXL322 +/-2g
ometers in the E8 package. The ADXL is a
solid state MEMS accelerometer with digital Breakout board for the dual axis ADXL32x
PWM or Analog output. The ADXL can meas- accelerometers. Brings out the analog volt-
ure both static and dynamic acceleration. This age levels from the X and Y axis to a stan-
means the ADXL is suited well for sensing tilt dard .1" header. The ADXL320 can be pow-
(used in many Glove / Air Mouse applications) ered from 2.4V-5.25V. The Self-Test pin
and for sensing brute acceleration (rocketry and can be used to verify sensor operation.
general motion sensing applications).
Board comes fully assembled and tested with selected sensor, 0.1uF Board comes fully assembled and tested
filtering capacitors, and 1MOhm pulse width resistor (where required). with selected sensor and 0.1uF filtering
capacitors.
Installed Sensor: ADXL210 +/-10g (PWM and Analog) Installed Sensor: ADXL322 (+/- 2g)

Dimensions: 18x18 mm (0.70x0.70")

Price Each 1 5+
ACC-002 Accelerometer Board - ADXL210AE +/-10g $55.00 $49.50
Price Each 1 5+
ACC-005 Accelerometer Board - ADXL322 +/-2g $39.00 $35.10
Accelerometer Breakout Board - ADXL320 +/-5g

Breakout board for the dual axis ADXL32x Tri Axis Accelerometer - MMA7260Q
accelerometers. Brings out the analog volt-
age levels from the X and Y axis to a stan- Breakout board for the 3 axis MMA7260Q
dard .1" header. The ADXL320 can be accelerometer from Freescale. Please view
powered from 2.4V-5.25V. The Self-Test the datasheet for this impressive sensor!
pin can be used to verify sensor operation. With a low power shut-down mode, high
sensitivity output with selectable ranges
Board comes fully assembled and tested (+/- 1.5, 2, 4, and 6g), this sensor is one of
with selected sensor and 0.1uF filtering the very first to market with three acceler-
capacitors. ometers sensors built onto a single IC!
Installed Sensor: ADXL320 (+/- 5g) Board comes fully assembled and tested
with external filters installed.)
Dimensions: 18x18 mm (0.70x0.70")
Dimensions: 25x25 mm (1x1")
Price Each 1 5+
ACC-006 Accelerometer Board - ADXL320 +/-5g $39.00 $35.10 Price Each 1 5+
ACC-007 Accelerometer Board - ADXL321 +/-18g 5g $39.00 $35.10 ACC-020 Accelerometer Board - MMA7260Q $47.50 $42.75

Tri Axis Accelerometer - LIS3LV02DQ

Breakout board for the 3 axis LIS3LV02DQ accelerometer from ST Micro. With a digital interface (SPI or I2C), the user only
has to initiate commands to get 1mg resolution! Independent channels can be shut off, the sensor can be powered down,
even an interrupt threshold can be set and used to awaken the sensor from power down! Selectable ranges are available for
+/-2g and 6g. This sensor is one of the first with triple axis and an easy to use digital interface. Board comes fully assembled
and tested with external decoupling caps.
We were thoroughly impressed with the flexibility and precision of this sensor. This is a great sensor to play with if you need
triple axis accelerations in digital form and you don't want to deal with analog conversions or filtering.

Dimensions: 21x23mm (0.8x0.9") Price Each 1 5+

ACC-021 Accelerometer Board - MMA7260Q $47.50 $42.75

Page 73 Ocean Controls Catalog 2008

 OCEAN CONTROLS - SENSORS
Serial Accelerometer Tri-Axis v5 - Dongle
3 Axis Accelerometer Breakout Board - ADXL330 +/-3g Serial Accelerometer Tri-Axis v5 - Enclosed

Breakout board for the 3 axis ADXL330 from The SerAccel v5 is a 3 axis accelerometer up to +/-6g with a simple se-
Analog Devices. This is the latest is a long, rial interface. The latest SerAccel development, version 5 has many new
proven line of Accelerometers from Analog - improvements including variable baud rate, a factory reset command,
and now the holy grail has finally arrived. The and a complete triple axis measurement
ADXL330 is a triple axis accelerometer with system based on the newly released
extremely low noise and power consumption - MMA7260Q sensor from Freescale.
only 320uA! Sensor ranges from +/-3g. Power is gained from any RS232 port
Board comes fully assembled and tested with (including USB-to-RS232 converters) so
external components installed. The ADXL330 no external power supply is needed. The
is a 3V part and outputs an analog voltage for onboard PIC (16LF88) runs at 10MHz
each of the three outputs. This voltage is in ratio to the measured accel- and outputs three different types of out-
eration and to the supply voltage (ratiometric). You will need some extra puts including calculated, binary, and
hardware to convert this analog signal to a usable digital one. Luckily, raw outputs. The SerAccel v5 has soft-
many uCs have a built in Analog to Digital converter. ware configurable settings to select
between 4 sensing ranges (+/- 1.5, 2, 4,
Installed Sensor: ADXL330 (+/- 3g) and 6g), as well as a software selectable
Dimensions: 18x18 mm (0.70x0.70") measurement frequency (0-590Hz).

Price Each 1 5+ The SerAccel outputs real-time accel-

ACC-008 Triple Axis Accelerometer Board - ADXL330 $45.00 $40.50 erations from 9600 to 57600bps using
visible ASCII characters. The SerAccel
is compatible with any RS232 Comm
Dual Axis Gyro Breakout Board port in conjunction with any terminal
program (Hyperterminal, VB Programs,
This is the first dual-axis MEMs gyro available or anything else that can read the comm port). Works with USB-RS232
on the open market. The IDG-300 is a 3.3V converters.
leadless IC with a smaller profile than other
single axis gyros. Originally designed for im- Price Each 1 5+
age stabilization, the IDG300 dual axis gyro is ACC-010 Serial Accelerometer Tri-Axis v5 - Dongle $105.00 $94.50
now available for the consulting and research ACC-011 Serial Accelerometer Tri-Axis v5 - Enclosed $112.50 $101.25
markets.
Applications:
* Inertial Measurement Units (IMUs)
* Handheld GPS Navigation Devices Gyro Breakout Board - ADXRS150 and ADXRS300
* Radio controlled helicopters
The ADXRS MEMs gyroscope from
* Toys and game devices
Analog Devices come in 2 forms.
* Robotic and power tools
The ADXRS150 150degs/sec and
* Antenna positioning
the ADXRS300 300 degs/sec.
* Remote control
The BGA package has hindered
users for long enough. You can
Features:
now use gyroscope rate sensing in
* Integrated X- and Y-axis gyro on a single chip
your own projects with this minia-
* Factory set full scale range of ±500°/sec
ture breakout board from Spark Fun
* Low offset voltage
Electronics.
* Integrated low-pass filters
* Integrated reset switches for high-pass filters
Units come fully populated and tested with an empty 0.1" spaced foot-
* Superior vibration rejection over a wide frequency range
print ready for a straight header, right angle header (recommended), or
Price Each 1 5+ your own wires/umbilical cable.
GYR-001 Dual Axis Gyro board
Dimensions: 18x18mm ( 0.70"x0.70")
Weight: 1.1g without header
Magnetic Sensor
Price Each 1 5+
This is a simple evaluation board for the GYR-005 Gyro Breakout Board - ADXRS150 $95.00 $85.50
HMC1052L magnetic sensor. The MOSFET GYR-006 Gyro Breakout Board - ADXRS300 $95.00 $85.50
reset and amplifier circuitry are all on board. All
you need is a sensitive ADC and a logic pin for
the reset control and you can get magnetic head-
ing! No external circuitry required. We recom-
mend at least a 16-bit ADC to get as much reso-
lution as possible.

Price Each 1 5+
MAG-001 HMC1052L Magnetic Sensor Card $34.95 $31.45

Page 74 Ocean Controls Catalog 2008

 OCEAN CONTROLS - SWITCH MODE POWER SUPPLIES
40W Single Rail Switchmode Supplies 60W Single Rail Switchmode Supplies

These switchmode power supplies are These switchmode power supplies are
available in 12VDC and 24VDC are over available in 12VDC and 24VDC are over
voltage protected and current limited voltage protected and current limited with
with UL/TUV/CE approvals. Powered UL/TUV/CE approvals. Powered from 85-
from 85-260VAC they are fitted with 260VAC they are fitted with screw termi-
screw terminals. The specifications are nals. The specifications are
Tolerance +/-1% Tolerance +/-1%
Ripple and Noise 100mV Ripple and Noise 125mV(12VDC), 150mV
Efficiency >75% (24VDC)
DC adjust range +/-10% Efficiency >=80%
Measurements 129(L)x98(W)x38(H)xmm DC adjust range +/-10%
Output Current 3.5A(12VDC) 1.8A(24VDC) Measurements 159(L)x98(W)x38(H)mm
2 year warranty Output Current 5.1A(12VDC) 2.7A(24VDC)
2 year warranty

Price Each 1 3+ Price Each 1 3+

PSM-001 40W Power Supply 12VDC $52.00 $46.80 PSM-003 60W Power Supply 12VDC $58.00 $52.20
PSM-002 40W Power Supply 24VDC $52.00 $46.80 PSM-004 60W Power Supply 24VDC $58.00 $52.20

100W Single Rail Switchmode supplies 150W Single Rail Switchmode supplies

These switchmode power supplies are These switchmode power supplies are
available in 12VDC and 24VDC are over available in 12VDC and 24VDC are over
voltage protected and short circuit and voltage protected and short circuit and
overload protected with UL/TUV/CE overload protected with UL/TUV/CE ap-
approvals. Powered from 85-260VAC provals. Powered from 85-260VAC they
they are fitted with screw terminals. are fitted with screw terminals.
The specifications are The specifications are
Tolerance +/-1% Tolerance +/-1%
Ripple and Noise 125mV(12VDC), 150mV(24VDC) Ripple and Noise 180mV(12VDC), 240mV(24VDC)
Efficiency >=80% Efficiency >80%
DC adjust range +/-10% DC adjust range +/-10%
Measurements 199(L)x98(W)x38(H)mm Measurements 199(L)x110(W)x50(H)mm
Output Current 8.5A(12VDC) 4.5A(24VDC) Output Current 12.5A(12VDC) 6.5A(24VDC)
1 year warranty 2 year warranty

Price Each 1 3+ Price Each 1 3+

PSM-005 100W Power Supply 12VDC $70.00 $63.00 PSM-007 150W Power Supply 12VDC $84.00 $75.60
PSM-006 100W Power Supply 24VDC $70.00 $63.00 PSM-008 150W Power Supply 24VDC $84.00 $75.60

40W Multiple Rail Switchmode Supplies 60W Multiple Rail Switchmode Supplies

These 40W Multiple rail supplies incorpo- These 60W Multiple rail supplies incorpo-
rate short circuit, over load and over volt- rate short circuit, over load and over volt-
age protection with CSA/CE/NRTLC ap- age protection with UL/CUL/TUV/CE/TB
provals. approvals. Powered from 85-264VAC they
Powered from 85-264VAC they are fitted are fitted with screw terminals.
with screw terminals. The specifications are
The specifications are Tolerance +/-2% 5VDC, +/-6% 12VDC and
Tolerance +/-2% 5VDC, +/-6% 12VDC and 15VDC
15VDC Ripple and Noise 100mV on 5VDC,
Ripple and Noise 100mV on 5VDC, 120mV on 12VDC and 15VDC 100mV on 12VDC and 15VDC
Efficiency 72% Efficiency 72%
Working Temperature 0-50degC Working Temperature 0-50degC
Measurements 129(L)x98(W)x38(H)xmm Measurements 159(L)x97(W)x38(H)xmm
2 year warranty 2 year warranty

Price Each 1 3+ Price Each 1 3+

PSM-051 +5VDC/3A, +12V/2A and -5VDC/0.5A $62.00 $55.80 PSM-054 +5VDC/7A, +12V/3.5A and -5VDC/1A $70.00 $63.00
PSM-052 +5VDC/3A, +12V/2A and –12VDC/0.5A $62.00 $55.80 PSM-055 +5VDC/5A, +12V/3.5A and –12VDC/1A $70.00 $63.00
PSM-053 +5VDC/3A, +15V/1.5A and –15VDC/0.5A $62.00 $55.80 PSM-056 +5VDC/5A, +15V/2A and –15VDC/0.5A $70.00 $63.00

Page 75 Ocean Controls Catalog 2008

 OCEAN CONTROLS - POWER SUPPLIES, BATTERY CHARGERS
120W Multiple Rail Switchmode Supplies 216W Desktop Battery Charger

Incorporate short circuit, over load and over voltage Incorporates short circuit, over load, over voltage and over
protection with UL/CUL/TUV/CE/TB approvals. Pow- temperature protection with CSA/NRTLC/
ered from 85-264VAC they are fitted CE approvals. Powered from 176-
with screw terminals. The specifications 264VAC it is fitted with terminal connec-
are tions. The specifications are
Tolerance +/-2% 5VDC, +/-6% -5VDC Tolerance +/-2% 13.5VDC, +/-1% 27VDC
12VDC and -12VDC and 54VDC
Ripple and Noise 80mV on 5VDC, Ripple and Noise 100mV on 13.5VDC,
120mV on 12VDC, 150mV on 15VDC 150mV on 27VDC and 400mV on 54VDC
Efficiency >75% Efficiency >81%
Working Temperature 0-50degC Working Temperature 0-40degC @
Measurements 199(L)x110(W)x38(H) 100degC, -10C @80%, 60C @ 60% load
xmm Measurements 150(L)x140(W)x75(H)xmm
2 year warranty
2 year warranty
Price Each 1 3+ Price Each 1 5+
PSM-057 +5V/11A, +12V/4A, -5V/0.5A, -12V/1A $104.00 $93.60 PSM-101 Battery Charger +13.5VDC/16A $209.00 $188.10
PSM-058 +5V/10A, +15V/3.5A, -5V/1A, -15V/1A $104.00 $93.60 PSM-102 Battery Charger +27VDC/8A $209.00 $188.10
PSM-059 +5V/8A, +12V/2A, +24V/2A, -12V/1A $104.00 $93.60

55W Switchmode supply with Battery Charger 155W Switchmode supply with Battery Charger

Features short circuit, over load and Features short circuit, over load and over
over voltage protection. Battery low and voltage protection. Battery low and Bat-
Battery polarity protection. Approvals tery polarity protection. Approvals include
include UL/CUL/TUV/CB/CE. Free air UL/CUL/TUV/CB/CE. Free air cooling
cooling convection. Powered from 88- convection. Powered from 88-264VAC.
264VAC they are fitted with screw termi- The specifications are
nals. The specifications are Tolerance +/-2% 13.8V, +/-1% 27.6V and
Tolerance +/-1% 54V
Ripple and Noise 100mV Ripple and Noise 150mV on 13.8V and 27.6V, 240mV on 54V
Efficiency >71% Efficiency >80%
Working Temperature 0-50degC Working Temperature
Measurements 159(L)x97(W)x38(H)xmm Without Fan -10~50degC 70% load
With Fan -10~50degC 100% load
2 year warranty Measurements 199(L)x110(W)x50(H)xmm
2 year warranty

Price Each 1 5+
PSM-105 13.8V/11A,5V/3A & 13.3V/0.5A charger $179.00 $161.10
Price Each 1 5+ PSM-106 27.6V/5.5A,5V/3A & 27.1V/0.5A charger $179.00 $161.10
PSM-103 13.8VDC/4A supply, 13.4V/0.23A charger $109.00 $98.10 PSM-107 54V/2.7A,5V/3A & 53.5V/0.5A charger $179.00 $161.10
PSM-104 27.6VDC/2A supply, 26.5V/0.16A charger $109.00 $98.10

20W Slimline DIN Rail Switchmode Supplies 40W Slimline DIN Rail Switchmode Supplies

These are available in 5, 12 and 24VDC. They These are available in 5, 12, 24 and
are temperature, over voltage protected and 48VDC. They are temperature, over volt-
current limited. Built in EMI filter and power on age protected and current limited. Built in
LED. Feature DC OK Relay contact. EMI filter and power on LED. Features DC
- Input voltage from 85-264VAC. OK Relay Contact
- DC adjustment range ±10% - Input voltage from 85-264VAC.
- Overload protection 105%~160% constant - DC adjustment range ±10%
current limiting, auto-recovery - Overload protection 105%~160% con-
- Over voltage protection 115%~135% rated stant current limiting, auto-recovery
output voltage, shut off - Over voltage protection 115%~135%
- Working temperature -20~50°C@100%, 70°C@50% load rated output voltage, shut off
- Ripple and Noise 120mV(12VDC), 150mV(24VDC) - Working temperature -20~50°C@100%, 70°C@50% load
- Efficiency 80%(12VDC) 84%(24VDC) - Ripple and Noise 120mV(12VDC), 150mV(24VDC)
- Output Current 1.67A(12VDC) 1.0A(24VDC) - Efficiency 86%(12VDC) 88%(24VDC)
- Case dimension (L×W×H) 22.5×90×100 mm - Output Current 3.3A(12VDC) 1.7A(24VDC)
3 year warranty - Case dimension (L×W×H) 40×90×100 mm 3 Year warranty

Price Each 1 3+ Price Each 1 3+

PSM-150 20W Power Supply 5VDC $59.00 $53.10 PSM-153 40W Power Supply 12VDC $76.00 $68.40
PSM-151 20W Power Supply 12VDC $59.00 $53.10 PSM-154 40W Power Supply 24VDC $70.00 $63.40
PSM-152 20W Power Supply 24VDC $59.00 $53.10 PSM-155 40W Power Supply 48VDC $76.00 $68.40

Page 76 Ocean Controls Catalog 2008

 OCEAN CONTROLS - POWER SUPPLIES
60W Slimline DIN Rail Switchmode Supplies

These are available in 5, 12, 24 and 48VDC.

They are temperature, over voltage protected and
current limited. Built in EMI filter and power on
LED. Features DC OK Relay Contact
- Input voltage from 85-264VAC.
- DC adjustment range ±10% rated output volt-
age
- Overload protection 105%~160% constant
current limiting, auto-recovery
- Over voltage protection 115%~135% rated
output voltage, shut off
- Working temperature -20~50°C@100%, 70°C@50% load
- Ripple and Noise 120mV(12VDC), 150mV(24VDC)
- Efficiency 86%(12VDC) 88%(24VDC)
- Output Current 5A(12VDC) 2.5A(24VDC)
- Case dimension (L×W×H) 40×90×100 mm , 3 year warranty

Price Each 1 3+
PSM-156 60W Power Supply 12VDC $80.00 $72.00
PSM-157 60W Power Supply 24VDC $74.00 $66.60
PSM-158 60W Power Supply 48VDC $80.00 $72.00

45W Industrial DIN Rail Switchmode Supplies

30W Industrial DIN Rail Switchmode Supplies
These switchmode power supplies are avail-
These switchmode power supplies are avail- able in 5VDC,12VDC and 24VDC. They are
able in 5VDC,12VDC and 24VDC. They are temperature, over voltage protected and cur-
temperature, over voltage protected and rent limited. Built in EMI filter and power on
current limited. Built in EMI filter and power LED.
on LED. Input voltage from 85-264VAC. Input voltage from 85-264VAC.
Tolerance +/-1%(12VDC), +/-1%(24VDC) Tolerance +/-1%(12VDC), +/-1%(24VDC)
Ripple and Noise 120mV(12VDC), 150mV Ripple and Noise 100mV(12VDC), 150mV
(24VDC) (24VDC)
Efficiency >74% Efficiency >75%
Measurements 78x93x56mm Measurements 93x78x67mm
Output Current 2.0A(12VDC) 1.5A(24VDC) Output Current 3.5A(12VDC) 2.0A(24VDC)
3 year warranty 3 year warranty

Price Each 1 3+
Price Each 1 3+ PSM-029 45W Power Supply 5VDC $66.00 $59.40
PSM-020 30W Power Supply 5VDC $58.00 $52.20 PSM-030 45W Power Supply 12VDC $66.00 $59.40
PSM-021 30W Power Supply 12VDC $58.00 $52.20 PSM-031 45W Power Supply 24VDC $66.00 $59.40
PSM-022 30W Power Supply 24VDC $58.00 $52.20

120W Industrial DIN Rail Switchmode Supplies

75W Industrial DIN Rail Switchmode Supplies

These supplies are available in These switchmode power supplies are

12VDC and 24VDC. They are tem- available in 12VDC and 24VDC. They are
perature, over voltage protected and temperature, over voltage protected and
current limited. Built in EMI filter and current limited. Built in EMI filter and
power on LED. Input voltage from 85 power on LED. Input voltage from 85-
-264VAC. 264VAC.
Tolerance +/-2%(12VDC), +/-1% Tolerance +/-2%(12VDC), +/-1%(24VDC)
(24VDC) Ripple and Noise 100mV(12VDC), 150mV
Ripple and Noise 100mV(12VDC), (24VDC)
150mV(24VDC) Efficiency >75%
Efficiency >75% Measurements 100x56x125mm
Measurements 100x56x125mm Output Current 12.5A(12VDC) 6.5A(24VDC)
Output Current 12.5A(12VDC) 6.5A(24VDC) 3 year warranty
3 year warranty
Price Each 1 3+
Price Each 1 3+ PSM-034 120W Power Supply 12VDC $115.00 $103.50
PSM-032 75W Power Supply 12VDC $100.00 $90.00 PSM-035 120W Power Supply 24VDC $115.00 $103.50
PSM-033 75W Power Supply 24VDC $100.00 $90.00 PSM-039 120W Power Supply 48VDC $115.00 $103.50

Page 77 Ocean Controls Catalog 2008

 OCEAN CONTROLS - POWER SUPPLIES & DC-DC CONVERTERS
240W Industrial DIN Rail Switchmode Supplies 480W Industrial DIN Rail Switchmode Supplies

This switchmode power supplies is avail- This switchmode power supplies is only
able 24VDC and 48VDC. It is temperature, available 24VDC. It is temperature, over
over voltage protected and current limited. voltage protected and current limited.
Built in EMI filter and power on LED. Input
voltage from 85-264VAC. Built in EMI filter and power on LED. Input
Tolerance +/-1% voltage from 85-264VAC.
Ripple and Noise 84mV Tolerance +/-1%
Efficiency >84% Ripple and Noise 120mV
Measurements 126x100x126mm Efficiency >89%
Output Current 10A(24VDC) Measurements 227x100x126mm
3 year warranty Output Current 20A(24VDC)
3 year warranty
Price Each 1 3+ Price Each 1__________3+__
PSM-036 240W Power Supply 24VDC $185.00 $166.50 PSM-037 480W Power Supply 24VDC $275.00 $247.50
PSM-040 240W Power Supply 48VDC $185.00 $166.50 PSM-038 480W Power Supply 48VDC $275.00 $247.50

120W 415VAC DIN Rail Switchmode Supplies 240W 3 Phase Industrial DIN Rail Switchmode Supplies

These switchmode power supplies are available in 24VDC and 48VDC. This switchmode power supplies is only
They are temperature, over voltage protected and current limited. Built in available 24VDC and 48VDC. It is tem-
EMI filter and power on LED. Input volt- perature, over voltage protected and
age from 340-550VAC. current limited. Built in EMI filter and
DC Adjustment range 24V: 24-28V, 48V: power on LED. Input voltage from 340-
48-55V 550VAC.
Tolerance +/-1% DC Adjustment range 24V: 24-28V,
Ripple and Noise 80mV 48V: 48-55V
Efficiency 85% Tolerance +/-1%
Working Temperature -20 to 60degC Ripple and Noise 80mV
Measurements 100x66x125mm Efficiency 89%
Output Current 5A(24VDC) 2.5A(48VDC) Working Temperature -20 to 70degC (Refer to Derating Curve)
3 year warranty Measurements 126x100x126mm
Output Current 10A(24VDC) 5A(48VDC)
3 year warranty
Price Each 1 3+ Price Each 1 3+
PSM-070 120W Power Supply 24VDC $164.00 $147.60 PSM-072 240W Power Supply 24VDC $210.00 $189.00
PSM-071 120W Power Supply 48VDC $164.00 $147.60 PSM-073 240W Power Supply 48VDC $210.00 $189.00

480W 3 Phase Industrial DIN Rail Switchmode Supplies 960W 3 Phase Industrial DIN Rail Switchmode Supplies

This switchmode power supplies is only This switchmode power supplies is only
available 24VDC and 48VDC. It is tem- available 24VDC and 48VDC. It is tem-
perature, over voltage protected and cur- perature, over voltage protected and cur-
rent limited. Built in EMI filter and power rent limited. Built in EMI filter and power
on LED. Input voltage from 340-550VAC. on LED. Input voltage from 340-550VAC.
Tolerance +/-1% Tolerance +/-1%
Ripple and Noise 80mV Ripple and Noise 80mV
Efficiency >89% Efficiency >91%
Measurements 227x100x126mm Measurements 276x100x126mm
Output Current 20A(24VDC) 10A(48VDC) Output Current 40A(24VDC) 20A(48VDC)
3 year warranty 3 year warranty

Price Each 1__________3+__ Price Each 1__________3+__

PSM-074 480W Power Supply 24VDC $299.00 $269.10 PSM-076 960W Power Supply 24VDC $540.00 $486.00
PSM-075 480W Power Supply 48VDC $299.00 $269.10 PSM-077 960W Power Supply 48VDC $540.00 $486.00

Page 78 Ocean Controls Catalog 2008

 OCEAN CONTROLS - DC-DC CONVERTERS
25W Single Output DC-DC Converter 50W Single Output DC-DC Converter

These 25W industrial grade DC-DC convert- These 50W industrial grade DC-DC convert-
ers feature: ers feature:
500VDC I/O isolation 500VDC I/O isolation
Insulation resistance 100MOhm@500VDC Insulation resistance 100MOhm@500VDC
Built in EMI Filter Built in EMI Filter
Over voltage protected, short circuit and Over voltage protected, short circuit and
overload protected overload protected
UL/TUV/CE approvals. UL/TUV/CE approvals.
Screw terminals. Screw terminals.
Line Regulation +/-0.5% Line Regulation +/-0.5%
Load Regulation +/-0.5% Load Regulation +/-0.5%
Ripple and Noise <150mV Ripple and Noise <150mV
Efficiency >70% Efficiency >70%
Measurements 99(L)x97(W)x35(H)xmm Measurements 159(L)x97(W)x38(H)xmm
Output Current 2.1A(12VDC) 1.1A(24VDC) Output Current 4.2A(12VDC) 2.1A(24VDC)
1 year warranty 1 year warranty
Price Each 1 3+ Price Each 1 3+
PDC-0001 9.2-18V(Input) 12V, 2.1A(Output) $69.00 $62.00 PDC-0005 9.2-18V(Input) 12V, 4.2A(Output) $79.00 $71.00
PDC-0002 9.2-18V(Input) 24V, 1.1A(Output) $69.00 $62.00 PDC-0006 9.2-18V(Input) 24V, 2.1A(Output) $79.00 $71.00
PDC-0003 19-36V(Input) 12V, 2.1A(Output) $69.00 $62.00 PDC-0007 19-36V(Input) 12V, 4.2A(Output) $79.00 $71.00
PDC-0004 19-36V(Input) 24V, 1.1A(Output) $69.00 $62.00 PDC-0008 19-36V(Input) 24V, 2.1A(Output) $79.00 $71.00

100W Single Output DC-DC Converter

These 100W industrial grade DC-DC converters feature:

500VDC I/O isolation
Insulation resistance 100MOhm@500VDC
Built in EMI Filter
Over voltage protected, short circuit and overload protected
UL/TUV/CE approvals.
Screw terminals.
Line Regulation +/-0.5%
Load Regulation +/-0.5%
Ripple and Noise <150mV
Efficiency >74%
Measurements 199(L)x98(W)x38(H)mm
Output Current 8.5A(12VDC) 4.2A
(24VDC) 1 year warranty

Price Each 1 3+
PDC-0011 19-36V(Input) 12V, 8.5A(Output) $109.00 $98.00
PDC-0012 19-36V(Input) 24V, 4.2A(Output) $109.00 $98.00

OCEAN CONTROLS - POWER SUPPLY KITS

Positive Adjustable Power Supply Negative Adjustable Power Supply

A compact, easy to build and use, A compact, easy to build and use,
positive variable power supply mod- positive variable power supply mod-
ule. It is ideal for powering any appli- ule. It is ideal for powering any appli-
cation requiring a DC supply at cur- cation requiring a DC supply at cur-
rent levels up to 1.5 amperes. Can rent levels up to 1.5 amperes. Can
be combined with PSU-011 to create be combined with PSU-009 to create
a dual-rail supply. a dual-rail supply.

Features: Features:
Ouput reverse polarity and back-voltage protection Ouput reverse polarity and back-voltage protection
LED power on indication LED power on indication
On board heatsink for regulator IC (LM317T) On board heatsink for regulator IC (LM337T)
Variable output voltage from 1.2V to 35V Variable output voltage from -1.2V to -35V
AC or DC input voltage AC or DC input voltage
Screw terminals for input, output and LED indicator Screw terminals for input, output and LED indicator

Price Each 1 5+ Price Each 1 5+

PSU-009 Positive Adjustable PS as kit $22.50 $20.25 PSU-011 Negative Adjustable PS as kit $22.50 $20.25
PSU-010 Positive Adjustable PS assembled $35.00 $31.50 PSU-012 Negative Adjustable PS assembled $35.00 $31.50

Page 79 Ocean Controls Catalog 2008

 OCEAN CONTROLS - TEST EQUIPMENT
Digital Function Generator Digital Tachometer

This digital function generator has variable This easy-to-use hand held digital tachometer meas-
sweep rate and width, as well as functioning as ures up to 99,999 RPM and features a large LCD
a standard waveform generator with sinusoi- display, laser pointer, low battery indicator, and mem-
dal, triangle and square wave outputs. DC ory recall for the last displayed value, minimum value,
offset adjustment allows the waveform to be and maximum value. It can also be switched to meas-
shifted above or below 0V, and symmetry ad- ure either actual RPM or total revolutions. Supplied
justment can be used to generate asymmetri- with carry case and 600mm reflective tape marks,
cal waveforms, with positive going cycles of which can be cut to size.
narrower width than the negative going pulses. Output amplitude is ad-
justable from 0 to 10V p-p via front panel control, with a switchable - Specifications:
20dB attenuator. Output frequency is adjustable between 0.02Hz to Display: 5 Digits, 16mm 0.7" LCD
2MHz Test range: 2.5 to 99,999 RPM
Resolution: 0.1RPM (2.5 - 999.9 RPM), 1RPM (over
1000PRM)
Accuracy: 0.05%

Price Each 1 Price Each 1

MET-100 Function Generator & Frequency Counter $453.64 MET-001 Digital Tachometer $63.95

Dwell Tachometer Digital Multimeter Digital Tachometer Laser Photo/Contact

Specifications Model DT-1236L

- RPM x 1, x10 Features
- Dwell angle * From Lutron World's patent, Multi-functions, one
- Resistance instrument combine Photo Tach.( RPM ) & Contact
- DC volts Tach. ( RPM, m/min., ft/min. ).
- 15 amp DC * High visible LCD display gives RPM reading ex-
- Continuity buzzer actly with no guessing or errors & saves battery
- Probe clips and Holster included * Laser light source, long detecting distance.
Features include a 3.5 digit LCD display with auto- * Wide measuring range from 0.5 to 100,000 RPM
matic zero adjustment, low battery warning and auto * This tachometer uses one chip LSI circuit & crystal
power off after 15 minutes. Includes dwell angle and time base, offering a high accurate measurement &
RPM (x1, x10) for 4, 5, 6 and 8 cylinder engines. fast sampling time.
Comprehensive user guide describes how to: * 0.1 RPM resolution measured value < 1000 RPM.
- Use dwell angle function * The use of durable, long lasting components, in-
- Dual point distributors cluding a strong, light weight ABS plastic housing, assures almost main-
- Set idle speed and mixture setting tenance free performance for many years. Carry case included.
- Adjust fast idle speed * High precison with 0.05% accuracy.
- Air fuel ratio test * The last value, max., value, min. value will be stored into the memory
- Air filter test automatically & can be . obtained by pressing Memory Call Button.
- Cylinder power balance test
- Positive crankcase ventilator (PCV) test Price Each 1
- Distributor centrifugal advance test MET-005 DT-1236L Digital Tachometer $278.00
- Heavy and light load battery test
Price Each 1 Tempgun with Laser Sight
MET-003 Dwell Tachometer and DVM $45.41
This is TempGun PE2, the next generation non
Digital Tachometer Laser Photo/Contact -contact infrared thermometer. Higher accu-
racy, laser sighting, and a tighter emission
profile make this new unit a must have for
Model DT-2236 tighter tolerance measurements. Just point it at
Features include any object and get the surface temperature.
* From Lutron World's patent, Multi-functions, one Remember the days when you couldn't buy a
instrument combine Photo Tachometer (RPM ) and laser pointer for under AUD$150? Now you
Contact Tachometer ( RPM, m/min., ft/min. ). can get one for AUD$65 with a surface tem-
* Wide measuring range : 0.5 to 100,000 RPM. perature to boot!
* < 1,000 RPM, 0.1 RPM resolution .
* High precision with 0.05% accuracy. * Range: (-27°F to 428°F) switchable to Celsius (-33°C to 220°C)
* Memorize the last value, max., value, min. value * Resolution: 0.1°
* High visible LCD display. * Accuracy: ±2 Degrees
* Exclusive one chip LSI circuit & crystal time base * Response Time: 1 second
* The use of durable, long lasting components, in- * Field of View (D:S Ratio): 8:1
cluding a strong, light weight ABS plastic housing, * Modes: Max/Min/Lock
assures almost maintenance free performance for * Emissivity: 0.05~1 adjustable
many years. Battery and Hard Carry Case included * 40 hours continuous use battery life
* Two CR2032 batteries
* Weight 80 grams
Price Each 1 Price Each 1
MET-010 DT-2236 Digital Tachometer $251.00 MET-022 Tempgun with Laser Sight $65.00

Page 80 Ocean Controls Catalog 2008

 OCEAN CONTROLS - TEST EQUIPMENT
Relative Humidity and Temperature
Infra-red Thermometer
This practical and convenient pocket
Compact, lightweight, handheld infra-red thermometer
instrument accurately measures and
enables accurate laser guided non-contact temperature
displays temperature and relative humid-
measurement of any given object (even in the dark). It
ity simultaneously. It is an invaluable
features easy one hand operation and can measure
companion for the HVAC technicians,
temperatures from -30°C to 550°C. It includes functions
laboratory researchers, food storage
for minimum and maximum readings, selectable auto
operators, librarians, or any professional
power off, data hold and adjustable warning alarm when
involved in computer rooms, printing
temperature rises or falls below user set levels. The
shops, paper, pulp and wood plants..
backlit display allows easy reading in dark areas. Can
display in either °C or °F.
Specifications:
Specifications:
Measuring range: 5-95% RH; -10 to 50°C
Detection element:Thermopile, Optical lens:Fresnel
Accuracy:-+3% FS for RH and -+0.2% for temperature.
Sighting:< 1mW laser marker, Range:-30°C to 550°C
Sensors: capacitive polymer for RH and precision thermistor for °C.
Resolution:0.5°C Accuracy: ± 2°C (-30°C to 100°C),
Respose time: 60s typical.
± 2% reading (101°C to 550°C)
HI and LO memory and HOLD function.
Temp coefficient:±0.2% of reading or 0.2°C (which ever is greater)
Auto shut-off in 20 seconds.
Response time: 0.25 seconds Spectral response: 6 to 14µm nominal
Measures in °C and °F.
Adjust emissivity (e): 0.1 to 1.0 Dimensions:˜ 105W x 42D x 148H mm
Powered by 2 AAA batteries in Elegant enclosure with protective case.
Price Each 1 Convenient pocket clip. Dimensions: 48x165x16 mm
MET-020 Infra-Red Thermometer $113.64
Price Each 1
MET-030 Relative Humidity and Temperature Meter $115.00
Network Cable Tester and DVM
DO-5510HA Oxygen Meter
2 instruments in one. Ideal for network installers
or technicians and allows the user to easily check The DO-5510 oxygen meter has a polaro-
cable integrity or measure AC & DC voltage, graphic type oxygen probe with an incorpo-
current, resistance, and continuity etc. without rated Temp. sensor, high precision measure-
needing to carry two separate devices. The unit ment for Dissolved Oxygen(DO), Oxygen in air
will check for cable continuity, open-circuits, short (O2) & Temp. measurement.
-circuits, and cross-connects etc. A remote termi- Features Include
nator is included and enables the user to check - Heavy duty dissolved oxygen probe, probe
network cables at a wall jack or patch panel. head can connect with BOD bottle.
Supplied with loop back cable, LAN terminator, - Automatic Temp. compensation from 0 to 50
and multimeter leads. degC for sensor probe.
LAN tester specifications: - Build in " % SALT " & " Mountain Height " com-
* LAN tester checks faults & miss wired conductors pensation adjustment button.
* Manual or automatic testing - Microprocessor circuit.
DMM Specifications: - Sampling Time: Approx 0.4 seconds
* 600 volt max input - Dimensions: 185 x 78 x 38mm
* 200mA AC/DC - Weight: 265g
* 20M ohm resistance - Battery and Soft Carry Case included
* 3.5 digit
* Diode test, Data Hold andMax hold Price Each 1
LUT-011 DO-5510A Oxygen Meter $358.00
Price Each 1
MET-002 Network Cable Tester and DVM $72.68 MS-7000 Moisture Meter

CD-4303 Conductivity Meter A portable, easy-to-use wood moisture meter

with built-in self calibration. Nine different mate-
rial groups in memory, providing calibrations for
The CD4303HA Conductivity Meter is portable and about 150 different material (wood) types. Built-
provides fast accurate readings, it comes supplied in self calibration with manual temperature
with an ATC conductivity probe - carry case and compensation adjustment.
full operating instructions. Product Highlights
* Data hold, Min/Max, Record & Recall func-
Functions include: Max/Min Readings, Dual Dis- tions
play and Memory Recall. * RS232 interface
* 9 Material Species groups in memory
Measurement Range: - * Remote pin type moisture probe for easy
Conductivity: 200 uS, 2mS, 20mS. operation
Values: 0.1uS to 199.9uS, 0.2mS to 1.999mS, * Auto shut off & low battery indication
2mS to 19.99mS. * Moisture probe, contact pins, battery & hard carrying case included
Resolution: 0.1uS, 0..001mS, 0.01mS. * Humidity Range: 9 to 30% Moisture Content
Accuracy: +/-2% (full scale + 1d) * Humidity Resolution: 0.1%
Temperature: 0 to 60 degress C. * Humidity Accuracy: +/-4% from 9 to 24%
* Temperature Range: 32 to 122 F / 0 to 50 C
* Temperature Resolution: 0.1 F/C
Price Each 1 Price Each 1
LUT-010 CD-4303HA Conductivity Meter $215.00 LUT-012 MS-7000 Moisture Meter $275.00

Page 81 Ocean Controls Catalog 2008

 OCEAN CONTROLS - TEST EQUIPMENT
PH-207HAH pH Meter LX-107HA Lux Meter

The PH-207AH Meter is portable and provides The LX-107HA Light Meter is portable and
fast accurate readings, it comes supplied with a provides fast accurate readings, it comes sup-
pH and temperature probe - carry case and full plied light probe - carry case and full operating
operating instructions. instructions.
Functions include: Max/Min Readings, Dual
Display and Memory Recall. Features
Measurement Ranges: - - 2000/20000/100000 Lux Measurement
- 0 to 14 pH x .01 pH Ranges
- mV 0 to 1999 mV Humidity - Data hold, Max, Min, Zero, 2 filters
- Temperature 0 to 65 degC - Displays in Lux, Ft-candle & % Value
- Tungsten, Fluorescent, Mercury, Sodium, 4
Features light type select, microprocessor circuit
Max, min., Data Hold and RS232 Output - Accuracy Lux Measurement ± (5% + 2d)
u-P circuit with LCD display - Size: 185 x 78 x 38mm
pH, mV, temp., manual temp adj.
Sampling Time Approx. 0.8 second. Price Each 1
Accuracy pH: ± ( 0.03 PH + 2 d) LUT-014 LX-107HA Lux Meter $152.00
Operating Temperature: 0 to 50 deg C.
Operating Humidity Less than 80% RH
Digital ORP Meter
Price Each 1
LUT-013 PH-207AH pH Meter $245.00 Comes with Remote Probe
Used for oxidation/reduction measurement in plating
Vibration Meter baths, waste water monitoring and other applications
such as AQUARIUM, BEVERAGE, FISH HATCHER-
Comes with accelerometer and Carry Case IES, FOOD PROCESSING, PHOTOGRAPHY, LABO-
All industrial machinery vibrates. The level of vibration RATORY, QUALITY CONTROL, SCHOOL & COL-
is a useful guide to the condition of the machine. LEGES, SWIMMING POOLS etc
Poor balance, misalignment and looseness of the
structure will cause the vibration level to increase and it Features Include:
is a sure sign that the maintenance is needed. * Range : -1,999 mV to +1,999 mV.
* Resolution : 1 mV.
Features Include: * Easy operation, compact size.
* Frequency range 10 Hz - 1 kHz, * Water resistance on the front panel.
sensitivity relative meet ISO 2954. * All function keys are used the rubber button.
* Supply with vibration sensor & * Large LCD display.
magnetic base, full set. Temperature: 0 to 60 degress C .
* Velocity range : 200 mm/s. * Hard carrying case included.
* Acceleration range : 200 m/s^2
* RMS & Peak measurement. Price Each 1
* Data hold, Memory ( Max. & Min. ). LUT-022 YK-23RP Digital ORP Meter $201.00
* Separate vibration probe.
* Optional data acquisition software.
Salt Water Meter
* Auto shut off saves battery life.
Price Each 1 A portable, easy-to-use digital salt water tester. It can
LUT-020 VB-8201 Vibration Meter $396.00 measure between 0 to 10%. It has wide applications in
water conditioning, aquariums, beverage, fish hatcher-
Pure Water Meter ies, food processing, photography, laboratory, paper
industry, plating industry, quality control, schools &
A portable, easy-to-use digital pure water tester colleges.

Features Include:
* Applications include: water conditioning, aquariums,
*Separate electrode, easy operation.
food processing, photography, schools, laboratories,
* The portable Salt meter provides fast, accurate readings, with digital
industry and quality control
readability.
* Check the condition of water filters
* Measuring range : 0 to 10 % salt.
* Measurement Range: 0-1999 uS
* Automatic temp. compensation for the probe.
* Automatic temperature compensation from 32 to 122
* Water resistance on the front panel.
degF or 0 to 50 degC
* All function keys are used the rubber button.
* Large LCD display
* Data hold.
* Data Hold function

Price Each 1 Price Each 1

LUT-024 YK-30WA Digital Pure Water Test $170.00 LUT-026 YK-31SA Digital Salt Meter $190.00

Page 82 Ocean Controls Catalog 2008

 OCEAN CONTROLS - TEST EQUIPMENT
Sound Level Meter 4 in 1 Environment Meter

A portable, easy-to-use sound Level meter. Rugged and The Lutron LM-8000 pocket environment ane-
ergonomically built to fit into the palm of your hand. mometer meter measures airflow, temperature,
light and relative humidity. It has a lightweight
Features Include: low-friction ball vane providing high accuracy
* Large, easy-to-read LCD display at high & low air velocity. The robust case
* Triple range measurement (30 to 80dB, 50 to 100dB, incorporates a large easy-to-read display and
80 to 130dB) wrist strap. Ideal for practically all conditions.
* A" frequency weighting (same as the human ear)
* Electric condenser microphone for high accuracy & - Selectable m/s, fpm, mph, km/hr or knots
long-term stability - Shock resistant low-friction ball vane
* Internal 94dB calibration - Easy to use push button operation
* Meets IEC 651 Type 2 requirements - Data hold freezes current measured value
* Data Hold & low battery indication - Min/max memory since power on
* 9V battery included - 18mm LCD display with function indicators
* Measuring Range: 35 to 130dB (A) - AAVM-8000 Has a 2 line display for 2 measured values e.g. Air veloc-
* Resolution: 0.1dB ity & Temperature and a K type thermocouple input
* Accuracy: +/-1.5dB - Supplied with instructions for use
* Frequency: 31.5Hz to 8kHz - Calibration certificates available
* Time Weighting: Fast - Requires 1 x PP3 9V Battery ALR-61 * Microphone: 1/2" electric con-
* Microphone: 1/2" electric condenser denser
* Conforms to: IEC 651 Type 2

Price Each 1 Price Each 1

LUT-030 SL-4010 Sound Level Meter $163.00 LUT-015 LM-8000 Environment Meter $190.00

CC421-Current Voltage Calibrator Prova 123 Calibrator

Features include Specifications

* Current Source: 0 to 24 mA, 2 ranges * 4-20mA (1K ohm load, 24V loop supply)
* Current Measurement: 0 to 24 mA, 2 ranges * 0-100.00mV, 0-1.0000V, 0-12.000V ranges
* Power & Current Measurement of 2-wire loop: 0 to * K, J, E, T Thermocouples (*C and *F)
24mA, 2 ranges * Frequency 1-62500Hz
* DC mV Source: -199.9 mV to +199.9 mV * 0.025% Basic Accuracy
* Current calibrator drives loads up to 500Ohm * Easy Key-pad Operation
* 13mm LCD display * Easy Step and Auto Ramp Functions
* current source and measurement accuracy 0.25%+1d * 0-20mA, 0-24mA selectable
* voltage source and measurement accuracy 0.25%+1d * 1-100% Input (mA, mV, V)
* Beeper Warning when Output is Open (mA)
Sampling Time: Approx 0.4 seconds
Dimensions: 185 x 78 x 38mm Less than 80% RH
Weight: 265g Storage Temperature -40 to 60degC
Battery and Soft Carry Case included Dimension: 88mm(L) x 168mm(W) x 26.2mm(H)
Weight 350g/12.34 oz. (Battery included)
Accessories Carrying case x 1
User manual x 1
Price Each 1 9V Alkaline Battery
LUT-001 CC-421 Current and Voltage Calibrator $212.00
Price Each 1
LUT-002 Prova 123 Calibrator $749.00

Page 83 Ocean Controls Catalog 2008

 OCEAN CONTROLS - AUDIO
20 Second Voice recorder module 120 Second Voice recorder module

This voice recording module offers solid state storage and playback of Introducing the new kit 189. Uses a
a single 20 second message and can be extended up to 30 seconds 17120 Second Voice Recorder
with a slight degradation of sound quality. Module. Non-volatile multi message
recorder using ISD chips. Just
Features: change one resistor for longer dura-
- Non volatile flash memory tion. Standalone operation using
- No battery backup required just six onboard bottons. Record via
- 2 button operation REC/PLAY built-in microphone or external line
- Low Power Consumption in. Speaker and line out connector.
- LED Indication SPI interface. 8-24 VDC.
- Built in mic
- 5V Operation

Only requires Speaker

Price Each 1
Price Each 1 5+ KIT-189 120 Second Voice module as Kit $39.00
KIT-363 20 Second Voice module $17.50 $15.75 KTA-189 120 Second Voice module as Kit $59.00

10W+10W Stereo Amplifier Module 6-10W Stereo Amplifier Module

This hi-fi quality class AB

The TDA2009A is a monolithic hi-fi audio amplifier is based
quality audio power amplifier IC with on the TDA2005 IC with
dual class AB outputs, designed for output current and thermal
high quality stereo applications. protection. 8-18 VDC Sup-
ply with 1-2 Amp capability
required. THD <0.1%, S/N
Kit uses the data book application
Ratio >80dBA, Gain
circuit and gives a gain of 36dB. It
<30dB
delivers 10 watts per channel into 4
Ohm speakers with a 24V DC supply. Can be fitted into existing equip-
ment if required.

Supply range: 8 - 28V DC. Screw terminal block connections. Heatsink

provided. PCB: 45 x 80mm

Price Each 1_ 5+ Price Each 1 5+

KIT-088 10W+10W Stereo Amplifier Module as Kit $23.00 $20.70 KIT-143 6-10W Stereo Amplifier Module as Kit $26.00 $23.40
KTA-088 10W+10W Stereo Amplifier Module Assembled $39.00 $35.10 KTA-143 6 -10W Stereo Amplifier Module Assembled $42.00 $37.80

50W Mono Hi Fi Power Amplifier

High power, hi-fi quality class AB audio amplifier module using a

TDA7294 IC. Provides an impressive 50W RMS into 8 Ohm or 82W
RMS into 4 Ohm with only 0.1% THD.
Mute and Standby are brought out to
connection pads on PCB. IC has internal
thermal protection.
Space is provided on the PCB for mount-
ing a 1.4°C/W heatsink (not provided).
All components including IC insulation
bush, screws, nuts & washers and TO-3
silicon-impregnated insulating washer are
provided. Heat sink, speaker, cables and
+/-30V power supply not provided. Solder
pad connections. PCB: 84x83mm
(heatsink area of PCB is 37x83mm but can overhang if required).

Price Each 1 5+
KIT-106 50W Mono Hi Fi Power Amplifier as Kit $45.00 $40.50
KTA-106 50W Mono Hi Fi Power Amplifier Assembled $65.00 $58.50

Page 84 Ocean Controls Catalog 2008

Page 85 Ocean Controls Catalog 2008
 OCEAN CONTROLS - THE FINE PRINT
Paying For Items
All our prices are in Australian Dollars. You can check the exchange rate by going to http://www.x-rates.com Prices on in our catalog do not include
GST (Goods and Services Tax). 10% GST applies to goods delivered in Australia.
Australian GST is not paid on shipments despatched to an international destination.

At this stage we accept Mastercard, Visa and American Express credit cards online. We only accept Visa and Mastercard for phone orders. We will
accept payments by Western Union. We will also accept a cheque or money order from an Australian based individual or company. If you wish to
make a purchase using a credit card but do not want to use our online ordering system then you can do a transaction over the phone or download
our order form and fax or email it to us.
Any international customer wishing to pay by bank transfer will be required to pay all bank fees including those of our bank (approximately
AUD$25).

Company Orders
If you are from an Australian Government Organisation we will accept an official order with a letterhead on it.
If you are a company with an ABN number you can apply to set up an account with us.

Delivery to Australian Addresses and New Zealand

All deliveries in Australia are done by Express Post which means you will receive it usually the next day or the following day at the latest. We deliver
by express post as it has a tracking number system.

If you want delivery by normal post you will have to ring us to determine cost of postage. For those who request normal postal service, we accept no
responsibility for the length of delivery time or any loss of packages

Packages to New Zealand are delivered by air mail and take approximately 4-7days

Delivery to International Addresses using Air Mail

We normally deliver goods by air mail. Typical delivery times are
UK and USA 6-10 days.
Canada and Europe 2 weeks
South Africa 2-3 weeks

We charge AUD$22.50 which includes insurance. Because the item is insured you will be required to sign for it at your post office. If your country is
not listed when you fill out the purchase form on our website then it means Australia Post does not insure goods to your country and you will be
prevented from making an online purchase. There is no tracking number issued with Air Mail.

Please note import Custom Duty/Taxes if payable are your responsibility.

Delivery to International Addresses using EIC, DHL or Fedex

If you want faster delivery then we can deliver it by Australian Post Express International Courier or EIC. Normally it costs AUD$45 for most small
parcels and will take 3-4 days. You will be issued with a tracking number. Please contact us to arrange payment for the EIC option

If you want goods delivered by DHL or Fedex then you must have an account with them.

Please note import Custom Duty/Taxes if payable are your responsibility.

Faulty Goods and Warranty

Where such goods have been supplied we undertake to repair or replace them as quickly as possible. Contact us with a description of the fault and
we will issue an authorisation to return the goods.
Our warranty period is 3 months from the date of purchase or longer as stated in our catalog or on our website.
Once a kit is under construction all warranty is void as we cannot guarantee the workmanship of the person assembling the unit. If a kit has been
purchased assembled and tested from us then a 3 month warranty applies.
Warranty is subject to us being satisfied that a defect was caused by defective workmanship or materials and was not caused by or was not sub-
stantially contributed to by other factors beyond our control including incorrect installation, alterations or modifications of the product not recom-
mended by the manufacturer.

Returns Policy
If you are dissatisfied with our goods you may return them within 7 days of the dispatch date. Contact us for an authorisation and we will refund your
purchase. All returned goods must in "as sold" condition including all packaging, documentation, invoices etc. Please note
The product returned may attract a 15% restocking fee.
The customer must pay the delivery costs.
Non standard, custom made or a specially manufactured product or imported product is not returnable.
Semiconductors are not refundable.

Peter Simmonds
Managing Director

Page 86 Ocean Controls Catalog 2008