HDSP-Fxxx, HDSP-Gxxx Series
10 mm (0.40 inch) Seven Segment Displays
Data Sheet
HDSP-F15x/F16x Series
HDSP-F20x/F30x/F40x/F50x Series
HDSP-G20x/G50x Series
Description Features
The 10 mm (0.40 inch) LED seven segment displays x Industry standard size
are Avago’s most space-efficient character size. They x Industry standard pinout
are designed for viewing distances up to 4.5 metres
(15 feet). These devices use an industry standard size 7.6 mm (0.3 inch) DIP single
package and pinout. The dual numeric, single numeric, 15.24 mm (0.6 inch) DIP dual
and ±1. overflow devices feature a right hand deci- Leads on 2.54 mm (0.1 inch) centers
mal point. All devices are available as either common
anode or common cathode. x Choice of colors
AlGaAs Red, High Efficiency Red, Orange, Yellow,
Typical applications include instruments, point of sale Green
terminals, and appliances.
x Excellent appearance
Features (Cont.) Evenly lighted segments
Mitered corners on segments
x Categorized for luminous intensity Gray package gives optimum contrast
Yellow and Green categorized for color Black surface and color tinted epoxy
Use of like categories yields a uniform display (HDSP-F161 only)
x High light output ±50° viewing angle
x High peak current x Design flexibility|
Common anode or common cathode
x Excellent for long digit string multiplexing
Single and dual digits
x Intensity and color selection option Right hand decimal point
x Sunlight viewable AlGaAs ±1. overflow character
Devices
AlGaAs
Red[1] HER Orange Yellow Green Package
HDSP- HDSP- HDSP- HDSP- HDSP- Description Drawing
F151 F201 F401 F301 F501 Common Anode Right Hand Decimal A
F161 Common Anode Right Hand Decimal A
F153 F203 F403 F303 F503 Common Cathode Right Hand Decimal B
F157 F207 Common Anode ±1. Overflow C
F158 F208 Common Cathode ±1. Overflow D
G201 G501 Two Digit Common Anode
Right Hand Decimal E
G203 G503 Two Digit Common Cathode
Right Hand Decimal F
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-F10X data sheet for low current operation.
Part Numbering System
5 0 8 2 - x xx x - x x x xx
HDSP - x xx x - x x x xx
Mechanical Options[1]
00: No mechanical option
16: Special dimensional tolerances
Color Bin Options[1,2]
0: No color bin limitation
Maximum Intensity Bin[1,2]
0: No maximum intensity bin limitation
Minimum Intensity Bin[1,2]
0: No minimum intensity bin limitation
Device Configuration/Color[1]
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to respective data sheet
Package[1]
F: 10 mm (0.4 inch) Single Digit Seven Segment Display
G: 10 mm (0.4 inch) Dual Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Avago representative for details.
2. Bin options refer to shippable bins for a part-number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply).
Please refer to respective data sheet for specific bin limit information.
2
Package Dimensions
3
Internal Circuit Diagram
FUNCTION
PIN E F
1 E CATHODE NO. 1 E ANODE NO. 1
2 D CATHODE NO. 1 D ANODE NO. 1
3 C CATHODE NO. 1 C ANODE NO. 1
4 DP CATHODE NO. 1 DP ANODE NO. 1
5 E CATHODE NO. 2 E ANODE NO. 2
6 D CATHODE NO. 2 D ANODE NO. 2
7 G CATHODE NO. 2 G ANODE NO. 2
8 C CATHODE NO. 2 C ANODE NO. 2
9 CP CATHODE NO. 2 DP ANODE NO. 2
10 B CATHODE NO. 2 B ANODE NO. 2
FUNCTION 11 A CATHODE NO. 2 A ANODE NO. 2
PIN A B C D 12 F CATHODE NO. 2 F ANODE NO. 2
1 ANODE[1] CATHODE[2] ANODE[1] CATHODE[2] 13 DIGIT NO. 2 ANODE DIGIT NO. 2 CATHODE
2 CATHODE f ANODE f CATHODE PLUS ANODE PLUS 14 DIGIT NO. 1 ANODE DIGIT NO. 1 CATHODE
3 CATHODE g ANODE g CATHODE MINUS ANODE MINUS 15 B CATHODE NO. 1 B ANODE NO. 1
4 CATHODE e ANODE e NC NC 16 A CATHODE NO. 1 A ANODE NO. 1
5 CATHODE d ANODE d NC NC 17 G CATHODE NO. 1 G ANODE NO. 1
6 ANODE[1] CATHODE[2] ANODE[1] CATHODE[2] 18 F CATHODE NO. 1 F ANODE NO. 1
7 CATHODE DP ANODE DP CATHODE DP ANODE DP
8 CATHODE c ANODE c CATHODE c ANODE c
9 CATHODE b ANODE b CATHODE b ANODE b
10 CATHODE a ANODE a NC NC
NOTES:
1. REDUNDANT ANODES
2. REDUNDANT CATHODES
HOLE PATTERN FOR PCB LAYOUT TO ACHIEVE UNIFORM 0.450 IN. DIGIT TO DIGIT PITCH. FOR HDSP-FXXX TO HDSP-GXXX.
4
Absolute Maximum Ratings
AlGaAs Red HER/Orange Yellow Green
HDSP- HDSP- HDSP- HDSP-
F15x/F16x F20x/G20x/ F30x F50x/G50x
Description Series Series Series Series Units
Average Power per Segment or DP 96 105 80 105 mW
Peak Forward Current per 160[1] 90[3] 60[5] 90[7] mA
Segment or DP
DC Forward Current per Segment 40[2] 30[4] 20[6] 30[8] mA
or DP
Operating Temperature Range –20 to +100[9] –40 to +100 °C
Storage Temperature Range –55 to +100 °C
Reverse Voltage per Segment or DP 3.0 V
Wavesoldering Temperature for 250 °C
3 Seconds (1.59 mm [0.063 in.]
below body)
Notes:
1. See Figure 1 to establish pulsed conditions. 6. Derate above 81°C at 0.52 mA/°C.
2. Derate above 46°C at 0.54 mA/°C. 7. See Figure 8 to establish pulsed conditions.
3. See Figure 6 to establish pulsed conditions. 8. Derate above 39°C at 0.37 mA/°C.
4. Derate above 53°C at 0.45 mA/°C. 9. For operation below -20°C, contact your local Avago
5. See Figure 7 to establish pulsed conditions. components sales office or an authorized distributor.
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1, 2,5] IV 7.5 15.0 mcd IF = 20 mA
(Digit Average)
Forward Voltage/Segment or DP VF 1.8 2.2 V IF = 20 mA
HDSP- Peak Wavelength OPEAK 645 nm
F15x/
F16x Dominant Wavelength[3] Od 637 nm
Reverse Voltage/Segment or DP[4] VR 3.0 15 V IR = 100 μA
Temperature Coefficient of ΔVF /°C -2 mV/°C
VF /Segment or DP
Thermal Resistance LED RTJ-PIN 320 °C/W/Seg
Junction-to-Pin
5
Electrical/Optical Characteristics at TA = 25°C, continued
High Efficiency Red
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2] IV 420 1200 μcd IF = 5 mA
(Digit Average)
Forward Voltage/Segment or DP VF 2.0 2.5 V IF = 20 mA
HDSP- Peak Wavelength OPEAK 635 nm
F20x/
G20x Dominant Wavelength[3] Od 626 nm
Reverse Voltage/Segment or DP[4] VR 3.0 30 V IR = 100 μA
Temperature Coefficient of ΔVF /°C -2 mV/°C
VF /Segment or DP
Thermal Resistance LED RTJ-PIN 320 °C/W/Seg
Junction-to-Pin
Orange
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2] IV 420 1200 μcd IF = 5 mA
(Digit Average)
Forward Voltage/Segment or DP VF 2.0 2.5 V IF = 20 mA
HDSP- Peak Wavelength lPEAK 600 nm
F40x
Dominant Wavelength[3] ld 603 nm
Reverse Voltage/Segment or DP[4] VR 3.0 30 V IR = 100 μA
Temperature Coefficient of ΔVF/°C -2 mV/°C
VF/Segment or DP
Thermal Resistance LED Rl\qJ-PIN 320 °C/W/Seg
Junction-to-Pin
6
Electrical/Optical Characteristics at TA = 25°C, continued
Yellow
Device
Series Parameter Symbol Min. Typ. Max. Units Test Conditions
Luminous Intensity/Segment[1,2] 290 800 μcd IF = 5 mA
(Digit Average) IV
Forward Voltage/Segment or DP VF 2.2 2.5 V IF = 20 mA
HDSP- Peak Wavelength OPEAK 583 nm
F30x
Dominant Wavelength[3,6] Od 581.5 586 592.5 nm
Reverse Voltage/Segment or DP[4] VR 3.0 40 V IR = 100 μA
Temperature Coefficient of ΔVF /°C -2 mV/°C
VF /Segment or DP
Thermal Resistance LED RTJ-PIN 320 °C/W/Seg
Junction-to-Pin
High Performance Green
Device Test
Series Parameter Symbol Min. Typ. Max. Units Conditions
Luminous Intensity/Segment[1,2] IV 1030 3500 μcd IF = 10 mA
(Digit Average)
Forward Voltage/Segment or DP VF 2.1 2.5 V IF = 10 mA
HDSP- Peak Wavelength OPEAK 566 nm
F50x/
G50x Dominant Wavelength[3,6] Od 571 577 nm
Reverse Voltage/Segment or DP[4] VR 3.0 50 V IR = 100 μA
Temperature Coefficient of ΔVF /°C -2 mV/°C
VF /Segment or DP
Thermal Resistance LED RTJ-PIN 320 °C/W/Seg
Junction-to-Pin
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength,Od, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-F10X, G10X series displays are recommended. They are tested at 1 mA
dc/segment and are pin for pin compatible with the HDSP-F15X/F16x/G15X series.
6. The Yellow (HDSP-F30X/G30X) series and Green (HDSP-F50X/G50X) series displays are categorized for dominant wavelength. The category is
designated by a number adjacent to the luminous intensity category letter.
7
AlGaAs Red
Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration – AlGaAs Red.
50
160
IF – FORWARD CURRENT PER SEGMENT – mA
RθJ-A = 770°C/W
45
IDC MAX. – MAXIMUM DC CURRENT
AlGaAs RED 140
40
120
PER SEGMENT – mA
35
AlGaAs RED
30 100
25
80
20
60
15
10 40
5 20
0
0
20 30 40 50 60 70 80 90 100 110 120 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
TA – AMBIENT TEMPERATURE – °C
VF – FORWARD VOLTAGE – V
Figure 2. Maximum Allowable DC Current vs. Ambient Temperature. Figure 3. Forward Current vs. Forward Voltage.
2.00 1.4
ηPEAK – NORMALIZED RELATIVE EFFICIENCY
1.75
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
(NORMALIZED TO 1 AT 20 mA)
1.50 1.2
1.25
1.00 1.0
AlGaAs RED
0.75
0.50 0.8
AlGaAs RED
0.25
0 0.6
0 5 10 15 20 25 30 35 40 0.5 2.0 5.0 10.0 20.0 50.0 150.0 500.0
1.0 3.0 30.0 100.0
IF – FORWARD CURRENT PER SEGMENT – mA
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 4. Relative Luminous Intensity vs. DC Forward Current. Figure 5. Relative Efficiency (Luminous Intensity per Unit
Current) vs. Peak Current.
8
HER, Orange, Yellow, Green
Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration – HER, Orange. Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – Yellow.
Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration – Green. Figure 9. Maximum Allowable DC Current vs. Ambient Temperature.
Figure 10. Forward Current vs. Forward Voltage Figure 11. Relative Luminous Intensity vs. DC Figure 12. Relative Efficiency (Luminous Intensity
Characteristics. Forward Current. per Unit Current) vs. Peak Current.
Intensity Bin Limits (mcd) Color Categories
AlGaAs Red Dominant Wavelength (nm)
HDSP-F15x/F16x Color Bin Min. Max.
IV Bin Category Min. Max. Yellow 1 581.50 585.00
L 8.67 15.90 3 584.00 587.50
M 13.00 23.80 2 586.50 590.00
N 19.50 35.80 4 589.00 592.50
O 29.30 53.60 Green 2 573.00 577.00
P 43.90 80.50 3 570.00 574.00
4 567.00 571.00
5 564.00 568.00
HER/Orange
HDSP-F20x/G20x/F40x Note:
IV Bin Category Min. Max. All categories are established for classification of products. Products
may not be available in all categories. Please contact your local Avago
C 0.485 0.890 representatives for further clarification/information.
D 0.728 1.333
E 1.091 2.000 Contrast Enhancement
F 1.636 3.000 For information on contrast enhancement, please see
G 2.454 4.500 Application Note 1015.
H 3.682 6.751
Soldering/Cleaning
Yellow Cleaning agents from the ketone family (acetone, methyl
HDSP-F30x ethyl ketone, etc.) and from the chlorinated hydrocarbon
IV Bin Category Min. Max. family (methylene chloride, trichloro- ethylene, carbon
C 0.297 0.543 tetrachloride, etc.) are not recommended for cleaning
D 0.445 0.817 LED parts. All of these various solvents attack or dissolve
the encapsulating epoxies used to form the package of
E 0.669 1.225
plastic LED parts.
F 1.003 1.838
G 1.504 2.758 For further information on soldering LEDs, please refer to
Application Note 1027.
H 2.256 4.137
Green
HDSP-F50x/G50x
IV Bin Category Min. Max.
H 1.54 2.82
I 2.31 4.23
J 3.46 6.34
K 5.18 9.50
L 7.78 14.26
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5989-2346EN
AV02-2556EN - June 29, 2010
