Coding&Adaptations | OBDeleven

Home Help Search Welcome Guest. Please Login or

Register.

OBDeleven ... 5F/KC Coding&Adaptations

Coding&Adaptations Reply

« Prev 1 2 3 4 5 6 7 Next »

Quote
mikel May 14, 2016 14:03:40 GMT OBDeleven and wukong like this
Moderator
MECHANICS
-------------------------------------------------- ---------------------------------
------------
Open / Close Haldex (Mechanical)
Activating the clamps are opened and once changed check again closed.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Basic Settings
3 - Select - Open Haldex
4 - Select - Clutch Haldex close
- Not enabled (default)
- Activated

Load / Bleed brake system

With this change you can load and bleed the brakes or without walking pressing
Posts: 28
the pedal to load.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Basic Settings
3 - Select - Load / bleed brake system
4 - Select the desired option

Bleed the brake

With this modification you can bleed the brakes without walking pressing the
pedal to load.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Basic Settings
3 - Select - Drain the brake
4 - Select the desired option
- Not enabled (default)
- Activated

Adjust Ah per battery charge

If you change the battery will be very useful this mod. Adjust the values ​that
come on the sticker on the battery and accepts the changes.
1 - Module 19 - diagnosis interface for data bus. Code (20103)

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

2 - Adaptation
3 - Select - Battery voltage
4 - Change AH ​desired value. 59 AH default.
Eye. Look at the right on the sticker on the battery values. Maker . Nº AH
series and if dry or wet.

SERVICE
-------------------------------------------------- ---------------------------------
------------
Reset service cycles
With this mod you can reset the maintenance service notification.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptations
3 - Select - PIM: Restart prolog.interv.mant
4 - Select one of three options:
- No warning (default)
- Active Notice
- Reset
Another way:
1 - Applications
2 - Inspection service reset
3 - Select the desired

Change notice review by KM

With this mod you can reset the warning maintenance service for kilometers.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select
4 - Fixed: Next máx.hasta mileage rev.en kil function.
5 - Change the desired value. Default 30000
6 - FIXED: resposic value. Próx.inspecc. Depending on the mileage
7 - Change to the desired value. Default 30000
8 - PIM maximum value of KM-delivery kilometric / review
9 - Change the desired value. Default 30000
10 - PIM: minimum value of km-long sandy provision / review
11 - Change the desired value. Default 15000
12 - SIA: value máx.de journey to service
13 - Change the desired value. Default 15000

Change days notice review

With this mod you can reset the maintenance service notice for days.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select
4 - Fixed: Time má.hsta next rev. Depending on the time
5 - Change the desired value. 730 default d
6 - FIXED: reposic.próx inspecc.en value function of time
7 - Change to the desired value. Default 365 d
8 - PIM maximum value of elapsed time between overhauls
9 - Change the desired value. 730 default d
10 - PIM: minimum value of elapsed time between overhauls
11 - Change the desired value. Default 365 d
12 - SIA: value longer up service
13 - Change the desired value. Default 365 d

Reset oil change warning

With this mod you can reset the oil change notice.
1 - Applications
2 - Oil service reset
3 - Select the desired

AUDIBLE WARNINGS
-------------------------------------------------- ---------------------------------
------------
Activate Alarm Free
No installation required. Suitable for all vehicles without standard alarm.
Vehicles without alarm installed. It only monitors doors, bonnet and trunk.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Extended coding (bytes)
3 - Byte 12
4 - Activate Bit 0 (Anti-theft system installed / active)
5 - Adaptation
6 - Submenu - Anti-theft protection
7 - DWA Alarmverzoegerung (Change value to "door contact thatcham driver")

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

8 - DWA Camper Modus (Change value to "enabled")

9 - Ueberwachung Innenentriegelungshelbel (Change value to "activated")
10 - Akustischer Alarm Signalhorn (Change value to "enabled")
11 - Submenu - Answer Signals
12 - Akustische Rueckmeldung global (Change value to "enabled")
13 - Akustische Rueckmeldung Signalhorn (Change value to "activated")

Note that once we leave the vehicle, the alarm is activated after a few seconds,
so if the
We want to try to wait a few seconds and then open the door from the inside
(with the window open, for
example). Lock the car while inside, and after about 30 seconds open the door
and
The alarm goes off, it switches off or gives the contact or the remote control
giving it to open.

Active horn without the key contact

With this mod the horn works but do not put the key. Eye, it is important to
have it so, a situation that makes you lack may occur and not have put the
key.
1 - Module 16 - Electronic steering column
2 - Extended coding (Mode Bytes)
3 - Byte 0
4 - Disable Bit 7
Another way:
1 - Coding extended (Text mode)
2 - Drive horn
3 - Select one of the two options:
- Always
- Terminal 15 ON

Disable beep when you open a door with ignition on

With this mod the warning beep gives to have the ignition and open the driver's
door or other doors off.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select - On active message, exciter
4 - Select one of three options:
- Driver's door (default)
- All doors
- No indication

Beep / alarm when locking and unlocking the car

With this mod you may have to close, open or in both cases with horn beep
occurs.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Signs response
4 - Sub - Akustische rueckmeldung entriegeln --- On
5 - Sub - Akustische rueckmeldung verriegeln --- On
6 - Sub - Global rueckmeldung --- On Akustische
7 - Sub - Akustische rueckmeldung Signalhorn --- On
8 - Sub - Menuesteuerung Akustische rueckmeldung --- On (On Screen
Display)
9 - Sub - Dauer der vom akustischen rueckmeldung einfachhorn --- Normal (No
alarm) or Kurz (with alarm)
Another way
1 - Applications
2 - Lock / Unlock confirmation acustic
3 - Select one of the options:
- Off
- Lock
- Unlock
- Lock / Unlock

Different beeps Seatbelt

With this mod you can change warning sounds coming from the factory classic
American (Various acute Ding and pause)
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding (Text mode)
3 - Select - Notice for the use of seat belts
4 - Select one of the options:
- Option 1 (default)
- Variant 2

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

- Off

MULTIMEDIA
-------------------------------------------------- ---------------------------------
------------
Input gain control RADIO FM, AM, DAB, SAT
With this mod you can change the antenna gain.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Amplify audio input Management Generation 2
4 - Change desired values ​- By default -128db

Hide / Show band RADIO AM

Lately almost all Lions come without the AM band active. With this mod you'll
enjoy it.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Extended Coding (Text mode)
3 - Byte 14 AM Disable
4 - Select between two options:
- Enabled (default) The hidden
- Not activated (Sample)

Adjusting the microphone sensitivity

If you think your microphone not also catches your voice, you can make it
more responsive making this mod.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Microphone Sensitivity
4 - Change the desired value. Default 0 db

Enable / Disable eject CD / DVD

With this mod you can unlock or lock the eject button on the CD / DVD
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Key CD ripping
4 - Select one of the two options:
- Unlocked (default)
- Locked

Enable AUX IN (USB + AUDIO MODULE)

With this mod you can activate or deactivate the AUX input (Pin Jack next USB)
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Extended Code (Text mode)
3 - Byte 8 AUX-IN
4 - Select one of the two options:
- On (default)
- Off

Activate the AMI (Mitsumi)

With this mod you can activate or deactivate the AMI input (Mitsumi that goes
in the glove compartment)
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Extended Code (Text mode)
3 - Byte 8 AMI
4 - Select one of the two options:
- Off (default)
- On

USB input change behavior

With this mod you can change the behavior of USB, IPOD, or just Full load
mode even disable it.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Extended Code (Text mode)
3 - Byte 19 USB
4 - Select one of four options:
- USB-IPOD (default)
- Off
- Charge
- Full

Add external sources

With this mod you can add several USB
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

3 - Select - Interface for external media activation

4 - Select one of four options:
- Connection 1
- Connection 2
- Connection 3
- Connection 4

Disable VIM
With this mod you can disable the lock for motion video in its most basic form
or even above plus the release of the video mirroring through MirrorLink.
1 - Applications
2 - Video in motion
3 - Select one of the options:
- VIM
- VIM / MirrorLink
- Deactivate

AIR CONDITIONING / HEATING

-------------------------------------------------- ---------------------------------
------------
More cold in the cooler
With this mod 30% more cold in the climate control is achieved. (Thanks to
Xagico)
1 - Module 08 - Electronic air conditioning / heating
2 - Extended Coding (Text)
3 - Temperature Adjustment
4 - Change value: Set colder func.refrig

Show climate control fan speed with LEDs in AUTO mode

As you know, in manual mode the speed segments are led us indicating the fan
speed, however they are not automatic. With this mod the it'll also show in
automatic mode.
1 - Module 08 - Electronic air conditioning / heating
2 - Extended Coding (Bytes)
3 - Byte 11
4 - Enable Bit 6
Another way:
1 - Applications
2 - When Enable fan level display
3 - Apply
Another way:
1 - Electronics Module 08- air conditioning / heating
2 - Extended Coding (Text)
3 - Select - Indicator turbine Adj. Automatic
4 - Change value to On

Memorize Automatic climate control recirculation at startup

With this mod, default by putting the air conditioner is activated in recirculation
mode.
1 - Module 08 - Electronic air conditioning / heating
2 - Extended Coding (Text mode)
3 - Save setting air circulation closed terminal 15
4 - Change to: Save depending on the standing time
Another way:
1 - Applications
2 - Air recirculation memory
3 - Select the desired

Heating time of the windscreen

With this mod, you can change the time that warming in the front window is
active.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Heating crystals
4 - Sub - Running time of heated front window
5 - Change value to 240s

Heating time of the rear window

With this mod, you can change the time that warming in the rear window is
active.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Heating crystals
4 - Sub - Heckscheibenheizung zeitwert

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

5 - Change value to 600 s

Automatic activation for wind defrost

With this mod, to start the car if the conditions are right cold start the air
conditioner blowing the windscreen defrosting default.
1 - Module 08 - Electronic air conditioning / heating
2 - Adaptations
3 - Select - Activa. Autom. Calefacc. Windshield deicing MAX
4 - Change value to On

Modify grades warning of possible danger ice

With this mod, you can change temperatures warning of possible danger of ice.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select - Outside temperature
4 - Search option - P exit temperature ice warning
5 - Modify the desired value: 6 ° C Default
6 - Search option - P ice warning entry temperature:
7 - Modify the desired value: 4 ° C Default

Adjusting the temperature exterior. Se updated at rest

With this mod, the outside temperature is also updated at rest. It will do so
during the time that you have marked.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select - Outside temperature
4 - Search option - P storage time engine off:
5 - Modify the desired value: 180 min Default

Save the last temperature of the heated seat

With this mod, the temperature set ultimately in your seat will be saved for
when you start the car again.
1 - Module 08 - Electronic air conditioning / heating
2 - Adaptation
3 - Select - Memorizing calef level. Passenger seat
4 - Change value to On
5 - Select - Memorizing calef level. Driver's seat
6 - Change value to On
Another way:
1 - Applications
2 - Heated seats memory
3 - Select the desired

Heating activate voice control

With this mod, it seems that it could handle heating voice. I do not know the
commands that can be used.
1 - Module 08 - Electronic air conditioning / heating
2 - Adaptation
3 - Select - voltage fan voice control
4 - Change value to On

MIRRORS / WINDOWS / CEILING / CLEAN

-------------------------------------------------- ---------------------------------
------------

Disabling comfort windows opening from the door lock

With this mod we can deactivate that they go down and that they raise the
windows with the key in the door lock.
It is very interesting because it has been proven that in some cases with any
key of the group can be lowered and open windows by turning it in the lock.
In no case with a key other than the car opens, but we have also detected that
if it can be closed.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Adaptation
3 - Access control 2 - Options (Various values)
4 ------ Schliesszylinder komfort oeffnen - Options (Activated - Inactive)
5 ------ Schliesszylinder komfort schliessen - Options (Activated - Inactive)

Semi-automatic folding and unfolding mirrors

With this mod, holding down the button on the remote can fold or unfold the
mirrors to lock or unlock the car.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

3 - Select - Control Access 2

4 - Sub - Funk modus spiegelanklppung
5 - Change value via remote control Convenience key opeation
Hold the button to fold or unfold

Lower rear view mirror right when reversing

With this mod, the reverse gear selector and mirrors in R, the lower right
mirror to the stored position.
1 - Module 52 - passenger door Electronics
2 - Extended coding (Mode Bytes)
3 - Byte 04
4 - Enable Bits 2 and 3
5 - Coding extended (Text mode)
6 - Select - Position memory With rear gear
7 - Change value to On
8 - Module 09 - Electronic. Code (31347)
9 - Adaptation
10 - Select - Control Access 2
11 - Sub - Menuesteuerung Spiegelabsenkung (On)
12 - Sub - Spiegelabsenkung bei Rueckwaertsfahrt (On)
Easier still:
1 - Applications
2 - Mirror dip
3 - Activate
To store the reverse position, put the selector R. Mete mirrors reverse. A
position that fits you well come. Remove the reverse and wait a few seconds.
You have it memorized.
Change the selector to 0 and the mirror should return to the normal running
position.

Folding mirrors with a touch control

With this mod, mirrors will fold without having to be continually pressing the
button on the remote.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Control Access 2
4 - Sub - Funk modus spiegelaklappung
5 - Change value By command via remote control look key

Folding mirrors. On-Screen Activation

With this mod, the windows are raised and the mirrors are folded without
having to be continuously pressing the button of the remote.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Adaptation
3 - Select - Access control 2
4 - Submenu - Menuesteuerung funk spiegel anklappen - Options (Inactive -
Activated)
5 - Change value to On
The Settings main screen is activated.

Opening and closing the windows comfort

With this modification will get the opening and closing windows in comfort
mode.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - Select - Control Access 2
4 - Sub - Comfort opening
5 - Change value to Active
6 - Sub - Menuesteuerung konfortbedienung einstellbar
7 - Change value Adjustable
8 - Sub - Funk konfort oeffnen
9 - Change value to Active
10 - Sub - SAD konfort oeffnen
11 - Change value to Active
12 - Sub - Comfort closing
13 - Change value to Active
14 - Sub - Funk konfort schliessen
15 - Change value to Active
16 - Sub - SAD konfort schliessen
17 - Change value to Active

Close windows to detect rain

If you leave the car with the windows down and starts to rain, the car
automatically closes the windows

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

1 - Module 09 - Electronic. Code (31347)

2 - Adaptation
3 - Select - Access Control 2
4 - Sub - ein aus Regenschliessen
6 - Change value to Active
7 - Sub - Menuesteuerung regenschliessen
8 - Change value to Active
9 - Sub - Regenschliessen art
10 - Change value to Permanent
11 - extended Coding (Bytes Mode)
12 - Byte 0
13 - Enable Bits 1 and 2

Activate windows with running even opening the doors so they do not
stop
With this mod, the windows work even with the doors open.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - Select - Functions assist light
4 - Select - Control Access 2
5 - Sub - FH Freigabenachlauf bei tueroeffnen abbrechen
6 - Change value to On

Full opening of the sunroof opening comfort

By default, pressing the roof opening, it opens to a fixed position. With this
mod the roof is fully opened without having to be pressed until it reaches the
end.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - Select - Control Access 2
4 - Sub - SAD Richtung komfortoeffnen
5 - Change value to Open

Front wiper stops in Service Mode when opening the bonnet

With this mod, each time you open the hood, the clean ones will be placed in
service mode. Very useful to wash the moon or change the clean. In normal
position when opening them they give in the bonnet.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Adaptation
3 - Select - Windshield wipers
4 - Sub-menu - Wischer abparken bei oeffnen der motorhaube
5 - Change value to On

Permanently disable comfort rear wiper system

If you do not like that every time you back up the rear wiper is started with this
mod you can disable it.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - Select - wiper
4 - Sub heck -Traenenwischen
5 - Change value on off

Rear wiper setting in the menu

This mod adds more function in the menu of the clean. You can choose to or
not activate the automatic rear clean.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - wiper
4 - Menuesteuerung konfortwischen HW
5 - Change value to On

Delay of closing the trunk when opening from the control button (car
CLOSED)
With this mod, having the car closed, when opening it, the trunk will open
delayed.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Adaptation
3 - Select - Access control
4 - Submenu - Freigabenachlauf heck nach Einzeloeffnung ueber HDF
Funktaster
5 - Change value to Active

INTERIOR LIGHTS
-------------------------------------------------- ---------------------------------

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

------------

Lighting intensity leds AACC / Climate

With this mod, you can change the intensity of illumination in the area of
​climate control.
1 - Module 08 - Electronic air conditioning / heating
2 - Adaptation
3 - Select - Dimming_characteristic_2 (LED indicator)
4 - Change value Y4 21%
5 - Select - Dimming_characteristic_3 (LED fan)
6 - Change value Y4 12%
7 - Select - Dimming_characteristic_5 (Other LEDs)
8 - Change value Y4 10%

Ambient light blank door with reverse

With this mod, carrying the doors in red, when putting the reverse gear will go
blank.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Adaptation
3 - Select - Leuchte16BLK SLB35BLK SL KC9
4 - Submenu - Lichtfunktion G 16
5 - Change value to Rückfahrlicht
6 - Select - Leuchte16BLK SLB35BLK SL KC9
7 - Submenu - Dimmwert GH 16
8 - Change value to 0
9 - Select - Leuchte16BLK SLB35BLK SL KC9
10 - Submenu - Dimming direction GH 16
11 - Change value to Minimize
12 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
13 - Submenu - Lichtfunktion C 17
14 - Change value to Rückfahrlicht
15 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
16 - Submenu - Dimmwert CD 17
17 - Change value to 127
18 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
19 - Submenu - Dimming direction CD 17
20 - Change value to Maximized

NOTE: Leuchte 16 is the red light (0 and minimized = 127 and maximized) and
Leuchte 17 is white light (0 and minimized = 127 and maximized)

Ambient door light with flashing and color change

With this mod, bringing the doors in red, when flashing, the door on the side of
the indicator flashes between red and white.
1 - Module 09 - Electronic control unit. Code (31347)
2 - Adaptation
3 - Select - Leuchte16BLK SLB35BLK SL KC9
4 - Submenu - Lichtfunktion C
5 - Change value to Blinken links (beide Phasen) BOTH SIDES OF
INTERMITTENT or Blinken links (Hellphase) ONLY WITH INTERMITTENT LEFT
6 - Select - Leuchte16BLK SLB35BLK SL KC9
7 - Submenu - Dimmwert CD
8 - Change value to 0
9 - Select - Leuchte16BLK SLB35BLK SL KC9
10 - Submenu - Dimming direction CD
11 - Change value to Minimize
12 - Select - Leuchte16BLK SLB35BLK SL KC9
13 - Submenu - Lichtfunktion E
14 - Change value to Blinken rechts (beide Phasen) BOTH SIDES OF
FLASHLIGHTS or Blinken rechts (Hellphase) ONLY WITH RIGHT INTERMITTENT
15 - Select - Leuchte16BLK SLB35BLK SL KC9
16 - Submenu - Dimmwert EF
17 - Change value to 0
18 - Select - Leuchte16BLK SLB35BLK SL KC9
19 - Submenu - Dimming direction EF
20 - Change value to Minimize
21 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
22 - Submenu - Lichtfunktion A
23 - Change value to Blinken links Hellphase
24 - Select - Leuchte17TFL R BLK SRB3TFL R BLK SR KC3
25 - Submenu - Lichtfunktion B
26 - Change value to Blinken rechts Hellphase

LED lights intensity curve picture instruments 1 (Day)

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

With this mod, you can change the intensity of illumination on the instrument
panel giving values ​for the day.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select - Dimming characteristic curve adjustement day clock dial
4 - Sub Y1-- Default (0) - Cambirar to (3) (maximum brightness)
5 - Select - Dimming characteristic curve adjustement day clock dial
6 - Sub Y2-- Default (0) - Change to (5) (Brighter)
7 - Select - Dimming characteristic curve adjustement day clock dial
8 - Sub Y3-- Default (0) - Change to (8) (Middle Brightness)
9 - Select - Dimming characteristic curve adjustement day clock dial
10 - Sub Y4-- Default (5) - Change to (8) (Darker)
11 - Select - Dimming characteristic curve adjustement day clock dial
12 - Sub Y5-- Default (30) - Change to (14) (Maximum Darkness)
It changes on the screen: Menu-Settings-Display-Gloss Select an option.

LED lights intensity curve box instruments 2 (Night)

With this mod, you can change the intensity of illumination on the instrument
panel giving values ​for the night.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select - Dimming characteristic curve adjustement night clock dial
4 - Sub Y1 - Default (5) - Leave it alone (maximum brightness)
5 - Select - Dimming characteristic curve adjustement night clock dial
6 - Sub Y2 - Default (5) - Change to (6) (Brighter)
7 - Select - Dimming characteristic curve adjustement night clock dial
8 - Sub Y3 - Default (36) - Change to (E) (Middle Brightness)
9 - Select - Dimming characteristic curve adjustement night clock dial
10 - Sub Y4 - Default (44) - Change to (1E) (Darker)
11 - Select - Dimming characteristic curve adjustement night clock dial
12 - Sub Y5-- Default (59) - Change to (32) (Maximum Darkness)
It changes on the screen: Menu-Settings-Display-Gloss Select an option.

Enable indicator Rear fog

With this modification we can visualize in the box snitch when we put the rear
lights.
1 - Module 09 - Electronic. Code (31347)
2 - Extended coding (Mode Bytes)
3 - Byte 7
4 - Enable Bit 4

Adjust the sensitivity of the light sensor

With this modification you can adjust the sensitivity of the light sensor.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Functions assist light
4 - Sub - Lichtsensorempfindlichkeit
5 - Select one of three options:
- Normal (default)
- Sensitive
- Non sensitive

OUTDOOR LIGHTS
-------------------------------------------------- ---------------------------------
------------

Turn off the daytime running lights (DRL) with the parking brake
This modification is very interesting because it allows us to leave day lights
(DRL) off while we have the hand brake with and without contact. Very useful
in low battery.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Daytime Running Light
4 - Sub - Tagfahrlicht Dauerfahrlicht bei Handbremse abschalten
5 - Change value to ON
Another way:
1 - Applications
2 - With handbrake off DLRS
3 - Select ON

Turn off daytime running lights (DRL) with light selector switch in
position 0
This change is also very interesting because it allows you to leave the day off
lights while wearing the light switch in zero position. It is compatible with the

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

previous one.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Daytime Running Light
4 - Sub - Tagfahrlicht nur in Schalterstellung AUTO
5 - Change value to ON

Eliminate error LED lamps on the license plate

If you are thinking of putting leds on the license plate, this will avoid
modification of the Fis you notice defective bulb.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte25KZL HA59
4 - Sub - Lasttyp 25
5 - Change value Allgemeine LED. 2 * default 5W
6 - Select - Leuchte25KZL HA59
7 - Sub - Dimmwert AB 25
8 - Change value to 127. Default 100

Remove error by mounting of LED lamp in front fog lamps

If you are thinking of putting LED on the front lights, with this modification you
will avoid the mistake of bulb failure.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte13NL RB5
4 - Sub - Lassttyp 13
5 - Change value LED Lichtmodul
6 - Sub - Dimmwert AB 13
7 - Change value to 127
8 - Select - Leuchte12NL LB45
9 - Sub - Lassttyp 12
10 - Change value LED Lichtmodul
11 - Sub - Dimmwert AB 12
12 - Change value to 127

Change number of flashes of intermittent comfort

Very interesting for those who believe that comfort intermittent mode fall short
with 3 flashes. The maximum value is 5 blinks.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Control of intermittent
4 - Sub - Komfortblinken blinkzyklen
5 - Change to the desired value - Maximum 5
6 - Reset factory settings on the screen lights Car

On or Off daytime running lights (DRL) from the screen

This modification will add a new option in the menu of lights that allow us to
activate or deactivate the daytime running lights (DRL) from the screen.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Daytime Running Light
4 - Sub - Tagfahrlichtnur Aktivierung oder durch BAP Bedienfolge moeglich
5 - Change value to ON

Long flash burst together with the fog lamps

With this change each time you press the burst in the lights of your car, will
light while the front fog lights.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte12NL LB45
4 - Sub - Lichtfunktion c 12
5 - Change value to Left high beam
6 - Select - Leuchte12NL LB45
7 - Sub - Dimmwert DC 12
8 - Change value to 100
9 - Select - Leuchte12NL LB45
10 - Sub - D 12 Lichtfunktion
11 - Change value to Lichthupe generell
12 - Select - Leuchte12NL LB45
13 - Sub - Dimming direction DC 12
14 - Change Value to Maximize
15 - Select - Leuchte13NL RB5
16 - Sub - Lichtfunktion c 13

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

17 - Change value Right high beam

18 - Select - Leuchte13NL RB5
19 - Sub - Dimmwert CD 13
20 - Change value to 100
21 - Select - Leuchte13NL RB5
22 - Sub - D 13 Lichtfunktion
23 - Change value to Lichthupe generell
24 - Select - Leuchte13NL RB5
25 - Sub - Dimming direction CD 13
26 - Change Value to Maximize

Activate front fog lamps when reversing

With this mod, when engaging reverse the front fog lights come on.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - static cornering light
4 - Sub - Bei rueckwaertsfahrt
5 - Change value to OFF

Deactivate the interior light when opening the trunk

With this change we will make the interior lights of the cabin is not light up
when opening the boot.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Interior lighting
4 - Sub - Innenlicht bei offenem heckdeckel einschalten
5- Change value to Off

Enable third brake light when you open the trunk

With this modification, the third brake light turns on when you open the trunk.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte22BR MA57
4 - Sub - Lichtfunktion C 22
5 - Change value to Heckdeckel Offen
6 - Sub - Dimmwert CD 22
7 - Change value to 100

Footrest Light
This modification is for those who have the light of the footrests and put it on
your own, be activated.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte30FR LC72
4 - Sub - Lichtfunktion E 30
5 - Change value to Interior Light

Enable DRL on front fog lamps

With this modification the fog lights will come on together with the DRL to carry
on.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte12NL LB45
4 - Sub - Lichtfunktion B 12
5 - Change value Daytime Running Lights
6 - Select - Leuchte13NL RB5
7 - Sub - Lichtfunktion B 13
8 - Change value Daytime Running Lights

Adjusting the intensity of the reverse

With this change we can adjust the light intensity reverse.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte29RFL RA64
4 - Sub - Dimmwert AB 29
5 - Change the desired value. maximum 127
6 - Select - Leuchte28RFL LC11
7 - Sub - Dimmwert AB 28
8 - Change to the desired value. maximum 127

Adjusting the intensity of rear fog

With this change we can adjust the intensity of the rear lights.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

3 - Select - Leuchte26NSL LA72

4 - Sub - Dimmwert AB 26
5 - Change value to 100 (maximum 127)

DRL intensity (Halogen and Bi-Xenon Basic)

With this change we can adjust the intensity of the lights day as we like,
considering that default come to 100 and the maximum value is 127.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte4TFL LB4
4 - Sub - Dimmwert AB 4
5 - Change the desired value. Default 100
6 - Select - Leuchte5TFL RB32
7 - Sub - Dimmwert AB 5
8 - Change to the desired value. Default 100
127 maximum allowed

DRL intensity lights dimmed mode (Halogen and Bi-Xenon Basic)

With this modification the DRL is gradually attenuated in the switching on and
off.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte4TFL LB4
4 - Sub - Dimmwert EF 4
5 - Change the desired value. By default 40
6 - Select - Leuchte5TFL RB32
7 - Sub - Dimmwert EF 5
8 - Change to the desired value. By default 40
127 maximum allowed

Intensity lights DRL LED lights

With this change we can adjust the intensity of the lights day as we like,
considering that default come to 100 and the maximum value is 127.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte2SL VLB10
4 - Sub - Dimmwert CD 2
5 - Change the desired value. Default 26
6 - Select - Leuchte3SL VRB21
7 - Sub - Dimmwert CD 3
8 - Change to the desired value. Default 26
127 maximum allowed

Flashing LED DRL dissipated

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte2SL VLB10
4 - Sub - Lichtfunktion CD 2
5 - Change value Blinken links aktiv (Beide phasen)
6 - Select - Leuchte2SL VLB10
7 - Sub - Dimmwert GH 2
8 - Change value to 36
9 - Select Leuchte2SL VLB10
10 - Sub - Dimming direction GH 2
11 - Change value to Minimize
12 - Select - Leuchte3SL VRB21
13 - Sub - Lichtfunktion G 3
14 - Change value Blinken links aktiv (Beide phasen)
15 - Select - Leuchte3SL VRB21
16 - Sub - Dimmwert GH 3
17 - Change value to 36
18 - Select - Leuchte3SL VRB21
19 - Sub - Dimming direction GH 3
20 - Change value to Minimize

Flashing DRL Simultaneous with bi-xenon headlights Basic

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte4TFL LB4
4 - Sub - Lichtfunktion C4
5 - Change value to Not active
6 - Select - Lichtfunktion C 5
7 - Change value to Not active

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

Flashing lights DRL with LED simultaneous

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte2SL VLB10
4 - Sub - Lichtfunktion G 2
5 - Change value Blinken links Dunkphase
6 - Select - Leuchte2SL VLB10
7 - Sub - Dimmwert GH 2
8 - Change to the desired value
9 - Select - Leuchte2SL VLB10
10 - Sub - Dimming direction GH 2
11 - Change value to Minimize
12 - Select - Leuchte3SL VRB21
13 - Sub - Lichtfunktion G 3
14 - Change value Blinken links Dunkphase
15 - Select - Leuchte3SL VRB21
16 - Sub - Dimmwert GH 3
17 - Change the desired value
18 - Select - Leuchte3SL VRB21
19 - Sub - Dimming direction GH 3
20 - Change value to Minimize

Activate Coming & Leaving Home in fog lights

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Lighting comfort
4 - Sub - Coming home leuchten
5 - Change value to Fog light

Enable fog cornering (cornering function)

If your car does not carry activated the fog lights turn on curves, with this
modification you can activate this feature.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte12NL LB45
4 - Sub - D 12 Lichtfunktion
5 - Change value to Abbiegelicht links
6 - Select - Leuchte12NL LB45
7 - Sub - Dimming direction DC 12
8 - Change Value to Maximize
9 - Select - Leuchte12NL LB45
10 - Sub - Dimmwert DC 12
11 - Change value to 100
12 - Select - Leuchte13NL RB5
13 - Sub - D 13 Lichtfunktion
14 - Change value to Abbiegelicht rechts
15 - Select - Leuchte13NL RB5
16 - Sub - Dimming direction CD 13
17 - Change Value to Maximize
18 - Select - Leuchte13NL RB5
19 - Sub - Dimmwert CD 13
20 - Change value to 100

Regulation of lights or turn corner

With this modification you can change the speed at which you want them to act
the cornering. By default come to 40 km / h.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - static curve light
4 - Sub - Untere geschwindigkeitsschwelle
5 - Change the desired value
6 - Sub - Obere Geschwindigkeitsschwelle
7 - Change value to 60. Default 40 Km / h

Turn off lights or turn corner

With this modification you can disable cornering function.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte12NL LB45 (Left)
4 - Sub Lichtfunktion B 12
5 - Change value to Not Active
6 - Select - Leuchte13NL RB5 (Right)
7 - Sub Lichtfunktion B 13
8 - Change value to Not Active

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

Automatic activation Coming & Leaving Home

With this modification the Coming and Leaving Home system is automatically
activated.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Lighting comfort
4 - Sub - Coming home verbaustatus
5 - Change value to Automatic

Activate Coming Home without light rain sensor or

If you do not have rain sensor you can also activate the Coming Home with this
modification.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Lighting comfort
4 - Sub - Coming Home Verbaustatus
5 - Change value to Automatic
6 - Sub - Menueeinstellung cominghome
7 - Change default value 20.Por 10 s
8 - Sub - Coming home Einschaltereignis
9 - Change value to Driver door
10 - Sub - Menuesteuerung coming home Werkseinstellung
11 - Change value to On
12 - Sub - Coming home leuchteng
13 - Change value Low beam

Coming Home & Leave Home - Include cornerings

With this modification you can include the cornerings to coming home and
leave home.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte8FL LB39
4 - Sub - Lichtfunktion H8
5 - Change value to leaving home Coming home oder aktiv
6 - Select - Leuchte8FL LB39
7 - Sub - Dimming direction GH 8
8 - Change Value to Maximize
9 - Select - Leuchte8FL LB39
10 - Sub - Dimmwert GH 8
11- Change value to 100
12 - Select - Leuchte9FL RB2
13 - Sub - Lichtfunktion H9
14 - Change value to leaving home Coming home oder aktiv
15 - Select - Leuchte9FL RB2
16 - Sub - Dimming direction GH 9
17 - Change Value to Maximize
18 - Select - Leuchte9FL RB2
19 - Sub - Dimmwert GH 9
20 - Change value to 100

Coming Home & Leave Home alone DRL, without beam (Halogen /
XENON)
With this modification, only the DRL will be active in the Coming and Leaving
Home.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte6ABL LC5
4 - Sub - Lichtfunktion C6
5 - Change value to leaving home Coming home oder aktiv
6 - Select - Leuchte6ABL LC5
7 - Sub - Dimming direction CD 6
8 - Change value to Minimize
9 - Select - Leuchte6ABL LC5
10 - Sub - Dimmwert CD 6
11 - Change the desired value
12 - Select - Leuchte7ABL RB1
13 - Sub - Lichtfunktion C 7
14 - Change value to leaving home Coming home oder aktiv
15 - Select - Leuchte7ABL RB1
16 - Sub - Dimming direction CD 7
17 - Change value to Minimize
18 - Select - Leuchte7ABL RB1
19 - Sub - Dimmwert CD 7

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

20 - Change the desired value

Coming Home & Leave Home with LED DRL Lights + Xenon
With this modification DRL + Xenon + fog lights are active in the Coming and
Leaving Home.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Lighting comfort
4 - Sub - Coming home leuchten
5 - Change value to Fog lights
6 - Select - Leuchte12NL LB45
7 - Sub - Lichtfunktion E 12
8 - Change value oder Coming Home Leaving home Aktiv
9 - Select - Leuchte12NL LB45
10 - Sub - Dimmwert EF 12
11 - Change the desired value

Coming Home & Leave Home also third brake light

With this modification, the third brake light is active in the Coming and Leaving
Home.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte22BR MA57
4 - Sub - Lichtfunktion B 22
5 - Change value to leaving home Coming home oder aktiv

Coming Home & Leave Home also inside. LED drivers

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte27NSL RC6
4 - Sub - Lichtfunktion B 27
5 - Change value to leaving home Coming home oder aktiv

Coming Home & Leave Home also inside. NO LED drivers

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte24SL HRA65
4 - Sub - Lichtfunktion B 24
5 - Change value to leaving home Coming home oder aktiv
6 - Select - Leuchte23SL HLC10
7 - Sub - Lichtfunktion B 23
8 - Change value to leaving home Coming home oder aktiv

Activate Coming Home to open the driver's door

With this modification, the Coming Home can be activated when you open the
driver's door.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Lighting comfort
4 - Sub - Coming home Einschaltereignis
5 - Change value to Drivers door

Reduction tail light (gate) Left with rear fog. (No LED Drivers)
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte23SL HLC10
4 - Sub - Lichtfunktion E 23
5 - Change value Nebelschlusslicht und wenn kein Anhaenger gesteckt
Rechtsverkehr
6 - Sub - Dimmwert EF 23
7 - Change value to 10
8 - Sub - Dimming direction EF 23
9 - Change value to Minimize

Reduction tail light (gate) with rear fog right. (No LED Drivers)
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte24SL HRA65
4 - Sub - Lichtfunktion E 24
5 - Change value Nebelschlusslicht und wenn kein Anhaenger gesteckt
Rechtsverkehr
6 - Sub - Dimmwert EF 24
7 - Change value to 10
8 - Sub - Dimming direction EF 24

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

9 - Change value to Minimize

Brake light also in the tail light (gate). (LED Drivers)

With this modification brake lights (For LED) is also lit in the headlights of the
gate instead of only on the rear wings.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte27NSL RC6
4 - Sub - D 27 Lichtfunktion
5 - Change value to Brake light
6 - Sub - Dimming direction CD 27
7 - Change Value to Maximize
8 - Sub - Dimmwert CD 27
9 - Change value to 100

Brake light also in the tail light (gate) (No LED Drivers)
With this modification, the brake lights are also switched on the headlights of
the gate instead of only on the rear fins. (For No LED lights)
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte23SL HLC10
4 - Sub - Lichtfunktion C 23
5 - Change value to Brake light
6 - Sub - Lichtfunktion CD 23
7 - Select - Leuchte23SL HLC10
8 - Change value to 100
9 - Select - Leuchte24SL HRA65
10 - Sub - Lichtfunktion C 24
11 - Change value to Brake light
12 - Sub - Lichtfunktion CD 24
13 - Change value to 100

Parking light position also inside. NO LED Car drivers CLOSED

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte23SL HLC10
4 - Sub - Lichtfunktion H 23
5 - Change value to Parklicht links
6 - Select - Leuchte23SL HLC10
7 - Sub - Dimming direction GH 23
8 - Change Value to Maximize
9 - Select - Leuchte23SL HLC10
10 - Sub - Dimmwert GH 23
11 - Change value to 28
12 - Select - Leuchte24SL HRA65
13 - Sub - Lichtfunktion H 24
14 - Change value Parking light right
15 - Select - Leuchte24SL HRA65
16 - Sub - Dimming direction GH 24
17 - Change Value to Maximize
18 - Select - Leuchte24SL HRA65
19 - Sub - Dimmwert GH 24
20 - Change value to 28

Parking light position also inside. Car LED drivers CLOSED

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte27NSL RC6
4 - Sub - Lichtfunktion B 27
5 - Change value Parking light right

Fog lights with Cornering together to put intermittent

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - static cornering light
4 - Sub - Vorschrift
5 - Change value to FMVSS 517 108. By default ECE R119

Activate tail light (gate) to open the trunk. (LED Drivers)

With this modification to open the trunk, lights that go in the gate will light ..
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte23SL HLC10
4 - Sub - HD Lichtansteuerung AB 23

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

5 - Change value to Always

6 - Select - Leuchte24SL HRA65
7 - Sub - HD Lichtansteuerung AB 24
8 - Change value to Always

Activate tail light (gate) to open the trunk. (LED Drivers)

With this modification to open the trunk, lights that go in the gate will light ..
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte26NSL LA72
4 - Sub - HD Lichtansteuerung AB 26
5 - Change value to Always
6 - Select - Leuchte27NSL RC6
7 - Sub - HD Lichtansteuerung AB 27
8- Change value to Always

Outer rear light in combination with intermittent. (No LED Drivers)

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte21BR RC8
4 - Sub - Lichtfunktion E 21
5 - Change value Blinken rechts hellphase
6 - Select - Leuchte21BR RC8
7 - Sub - Dimming direction EF 21
8 - Change Value to Maximize
9 - Select - Leuchte21BR RC8
10 - Sub - Dimmwert EF 21
11 - Change value to 100
12 - Select - Leuchte20 LA71 BR
13 - Sub - Lichtfunktion E 20
14 - Change value Blinken links hellphase
15 - Select - Leuchte20 LA71 BR
16 - Sub - Dimming direction EF 20
17 - Change Value to Maximize
18 - Select - Leuchte20 LA71 BR
19 - Sub - Dimmwert EF 20
20 - Change value to 100

Activate daylight (DRL) in rear. LED drivers

With this modification when you take DRL lit, the rear lights also illuminate.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Daytime Running Light
4 - Sub - Tagfahrlicht dauerfahlicht aktiviert zusaetzlich standlicht
5 - Change value to On

Activate rear fog with the trunk open. (No LED Drivers)
With this modification we can make the rear fog lights turn on when you open
the trunk.
1 - Module 09 - Electronic
2 - Adaptation
3 - Select - Leuchte26NSL LA72
4 - Sub - HD Lichtansteuerung AB 26
5 - Change value to Always

Activate rear fog coupled trailer

With this modification, by bringing an activated trailer, the rear fog lights.
1 - Electronic control module 09-. Code (31347)
2 - Adaptation
3 - Select - Leuchte26NSL LA72
4 - Sub - Lichtfunktion A 26
5 - Change value Nebelschlusslicht wenn kein Anhaenger gesteckt

Red light in all driving modes

With this modification, the lights of the doors will always be red in all driving
modes.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte17TFL SRB3TFL R R BLK BLK SR KC3
4 - Sub - Lichtfunktion A 17
5 - Change value to Off
6 - Select - Leuchte16BLK SLB35BLK SL KC9
7 - Sub - Lichtfunktion B 16
8 - Change value to environmental Luz 3

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

Scandinavian DRLS
1 - Applications
2 - Scandinavian DRLS
3 - Select On

DRL with Short

1 - Applications
2 - DRLS and FOG as CK / LH
3 - Select On

Lights (short / long) always active assistance with camera 5Q0-980-

653-E
With this modification the automatic lights are always active. You need to have
the camera.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Functions assist light
4 - Sub - Fernlichtassistent reset
5 - Change value INACTIVE

DRL against appr phase with Bi-Xenon front lights and Halogen
With this modification you can make do the following: When the flashing light
DRL are off and when the indicator is off the DRL light. It is very cool.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte4TFL LB4
4 - Sub - Lichtfunktion C4
5 - Change Value Not active
6 - Select - Leuchte4TFL LB4
7 - Sub - Dimmwert GH 4
8 - Change to the desired value
9 - Select - Leuchte4TFL LB4
10 - Sub - Lichtfunktion G 4
11 - Change value Blinken links hellphase
12 - Select - Leuchte4TFL LB4
13 - Sub - Dimming direction GH 4
14 - Change value to Minimize
15 - Select - Leuchte5TFL RB32
16 - Sub - Lichtfunktion C 5
17 - Change Value Not active
18 - Select - Leuchte5TFL RB32
19 - Sub - Dimmwert GH 5
20 - Change the desired value
21 - Select - Leuchte5TFL RB32
22 - Sub - Lichtfunktion G 5
23 - Change Blinken value rechts hellphase
24 - Select - Leuchte5TFL RB32
25 - Sub - Dimming direction GH 5
26 - Change value to Minimize

Against Stage lights DRL with LED lights appr Forward

With this modification you can make do the following: When the flashing light
DRL are off and when the indicator is off the DRL light. It is very cool.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte2SL VLB10
4 - Sub - Lichtfunktion G 2
5 - Change value Blinken links Hellphase
6 - Select - Leuchte2SL VLB10
7 - Sub - Dimmwert GH 2
8 - Change to the desired value
9 - Select - Leuchte2SL VLB10
10 - Sub - Dimming direction GH 2
11 - Change value to Minimize

Rear lights flashing in sequence mode (LED Drivers)

1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Leuchte16BLK SLB35BLK SL KC9
4 - Sub - Lichtfunktion A 16
5 - Change value Blinken links Hellphase
6 - Select - Leuchte17TFL SRB3TFL R R BLK BLK SR KC3
7 - Sub - Lichtfunktion A 17

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

8 - Change value Blinken links Hellphase

DRIVER AID / MODES

-------------------------------------------------- ---------------------------------
------------

Sensitivity hill start assistant

We can modify the way the wizard acts hill start adapting to our needs or
habits.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Adaptation
3 - Select - Start Assist slope
4 - Activate one of the three options:
- Normal (default)
- Advance
- Time delay

Tilt hill start assistant

With this modification we can change when we want to be activated depending
on the steepness of the slope.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Adaptation
3 - Select - Start Assist slope, slope limit
4 - Change the value you want.
A higher value more inclination required for activation
Default 3%

Disabling pending Support Assistant

With this modification we can cancel the pending help system.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Extended Coding
3 - Byte 16
4 - Enable Bit 0

Expanded XDS electronic differential lock

We may change the way it works, you can choose between several values ​in a
way that best suits our driving.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Adaptation
3 - Select - Electronic Differential Lock Expanded
4 - Activate one of the five options:
- Standard (default)
- Central
- Not activated
- Weak
- Strong

ESP depending on the speed

Applying this modification can activate the ESP function acting on the speed
that take the vehicle or the value is always fixed.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Adaptation
3 - Select - Electronic Stability Program
4 - Select one of the two options:
- Activation function of speed
- Not enabled (default)
- Activated

ESP multimode
Applying this modification can have multiple ESP and ASR options depending on
how we program.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Extended Coding (byte mode)
3 - Byte 29
4 - Bits 0.1 and 2 Activated shows: Activated - ASR disabled - ESP off.
5 - Bit 1 Enabled shows: Activated - ASR deactivated
5 - Bit 2 On shows: Activated - ESC disabled
6 - Bits 1 and 2 shows Activated: Activated - Sport ESC - ESC disabled
7 - Bits 0 and 3 On displays: - On - ASR disabled - ESC Sport.

Disable ESP and ASR

With this modification permanently dasactiva the ESP. I do not recommend it, I
do not like.
1 - Module 03 - Electronic brake. Code (40168/20103)

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

2 - Basic Settings
3 - Select - Deactivation ESP and ASR
4 - Select one of the two options:
- Not enabled (default)
- Activated

Intensity of the steering wheel in lane departure

With this modification, we can change the force as the steering wheel acts by
focusing on the lane when it detects that left us.
1 - Module A5 - front sensors driver assistance system. Code (20103)
2 - Adaptation
3 - Select - Asst. Lane departure warning. Intensity power steering
4 - Select one of three options:
- Medium (default)
- Weak
- Strong

Hardness of the steering wheel

With this modification you can put the steering wheel in different hardness
values.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Adaptation
3 - Select - countersteering assisted
4 - Select one of three options:
- Strong (default)
- Central
- Weak

Setting the steering wheel vibration with Lane Assist

With this modification, we can change the vibration of the steering wheel by
focusing on the lane when it detects that left us.
1 - Module A5 - front sensors driver assistance system. Code (20103)
2 - Adaptation
3 - Select - Operating mode
4 - Select: Vibration ON
5 - Select - Sist. Lane departure warning, steering wheel vibration intensity
6 - Select one of three options:
- Medium (default)
- Weak
- Strong
7 - Select - Moment of intervention
8 - Select one of four options:
- Late. Adjustment menu (default)
- Early. Adjustment menu.
- Advance
- Time delay
- Reserved

Settings On / Off Light sensor Assist

With this modification, we can change the values ​of activation and deactivation
of the automatic lights
1 - Module A5 - front sensors driver assistance system. Code (20103)
2 - Adaptation
3 - Select - Lum.de off vehicle detection in the dark
4 - Change the desired value. By default 20 lx
5 - Select - Brightness of Activac. Vehicle detection in the dark
6 -Change the desired value. By Default 3 lx

Light Assist always active when starting off

With this modification to start the car the automatic lights are activated by
default.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Daytime Running Light
4 - Sub - Fenlichtassistent reset
5 - Change value on off

Reset Light Assist when moving off

With this modification to the automatic start the car lights are turned off by
default.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Select - Daytime Running Light
4 - Sub - Fenlichtassistent reset

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

5 - Change value to On

Modify the setting of the main-beam assistant

With this modification we can modify the rates of activation of the beam in
automatic mode
1 - Module A5 - front sensors driver assistance system. Code (20103)
2 - Adaptation
3 - Select - speed p.asist activation. Beam
4 - Change the desired value. By default 57 Km / h
5 - Select - Threshold vel. To recomend. Road lights OFF
6 - Change the desired value. Default 27 Km / h

Activate the warning of speeding and at what speed

With this modification you can activate the speed warning and at what speed. It
can be done on the screen.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding
3 - Byte 0
4 - Enable Bit 6
Another way :
1 - Adaptation
2 - Select - Speed ​Warning
3 - Select one of the two options:
- Activated
- Off (default)
4 - Change value in kilometers per hour to the desired

Enable LANE ASSIST

1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding
3 - Byte 4
4 - Enable Bit 6
5 - Byte 11
6 - Enable Bit 1
1 - Module 44 - Power steering - Code (19249)
2 - Extended Coding
3 - Byte 0
4 - Enable Bit 4
1 - Module A5 - front sensors driver assistance system. Code (20103)
2 - Extended Coding (Text mode)
3 - Select - Coding HCA
4 - Change value ENCODED
1 - Module A5 - front sensors driver assistance system. Code (20103)
2 - Adaptation
3 - Select - HCA Warning Intensity
4 - Change value Medium
5 - Select - BAP Personalisierung
6 - Change value to NO ON
7 - Select - Customized. Asst rail output terminal 15 on
8 - Change value last adjustment
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function List Bap Gen 2
- Submenu - LDW HCA 0x19 - Change to On
- Submenu - LDW HCA 0x19 Change msg Bus data bus extended
4 - Select - Car Function Adaptations Gen 2
5 - Search submenu - Menu display lane departure (ON)
6 - Search submenu - Menu display over lane departure warning threshold
(ON)

Disable Start / Stop System

With this modification permanently deactivate the Start / Stop and no longer
have to do this every time you boot from the button.
1 - Module 19 - diagnosis interface for data bus. Code (20103)
2 - Adaptation
3 - Select - Limit Initial voltage Start / Stop
4 - Change value of 12 V. Default 7.6 V.
Another way:
1 - Module 19 - diagnosis interface for data bus. Code (20103)
2 - Adaptation
3 - Select - EM start stop ambient temperature requirement
4 - Change value by 50. Default -50C.

Enable Display Driver Profiles at Startup

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

If your car is driving profiles, with this mod, every time you boot it will show in
the FIS how you are without having to look at the screen.
1 - Module 19 - diagnosis interface for data bus. Code (20103)
2 - Extended Coding (byte mode)
3 - Byte 8
4 - Activate bit 4

Direct Acceleration - Throttle response

With this mod, you can change the behavior of the accelerator. Option B
provides a more linear acceleration without sudden deliveries.
1 - Module 44 - Power steering. Code (19249)
2 - Adaptation
3 - Select - switching driving profile
Choices :
A - Gradual, controlled by time
B - Directly controlled threshold value

Driver Profile - Driving Modes

With this mod, you can change the behavior of the car, in dynamic mode
behaves somewhat more cheerful in the reactions.
1 - Module 44 - Power steering. Code (19249)
2 - Adaptation
3 - Select - Lines features power steering
Choices :
- Button for selecting the driving profile
- Comfort
- Dynamic
- Automatic
- Default

Deactivation threshold driver activity

With this mod, we can change the behavior of Lane Assist, so that it acts before
or after how the default.
1 - Module A5 - front sensors driver assistance system. Code (20103)
2 - Adaptation
3 - Select - Asst. Lane departure warning, driver Inactivity threshold
Deactivation
4 - Select one of three options:
- Medium (default)
- Advance
- Time delay

Activate the traffic sign recognition

With this mod, we can make our car to show us the road signs in the FIS.Es
need to have the camera installed.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function Adaptations Gen 2
4 - Search submenu - Menu road sign identification display (ON)
5 - Search submenu - Menu road sign identification display over threshold (ON)
6 - Select - Car Function List Bap Gen 2
7 - Search submenu - Traffic sign recognition 0x21 (ON)
8 - Search submenu - Traffic sign recognition 0x21 msg bus (data bus comfort)
1 - Module A5 - front sensors driver assistance system. Code (20103)
2 - Extended coding (Mode Bytes)
3 - Byte 1
4 - Enable Bit 0
5 - Adaptation
6 - Select - Show signals to speed limits
7 - Change value to On
8 - Select - Show additional signals valid
9 - Change value (100111)
10 - Select - Identify traffic signs fusion mode
11 - Selecting an option available:
- Fusion of traffic signs
- Traffic Signal Detection
- Electronic Horizon
12 - Select - Function Module Road Sign Recognition
13 - Change value to On
14 - Extended Coding (Text mode)
15 - Select - Coding HCA
16 - Change value Coded
1 - Module 17 - Code Box instruments- (25327)

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

2 - Extended coding (Mode Bytes)

3 - Byte 5
4 - Enable Bit 2

Drying the brake discs

Our cars have a brake drying system which acts each time you start the car for
a fixed time.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Adaptation
3 - Select - Drying brake discs
4 - Activate one of four options:
- Central (default)
- Not activated
- Weak
- Strong

Reset settings tires

If you take time with your car and you were adjusting the pressure and want to
adjust them to the factory settings, you can do so using this modification.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Basic Settings
3 - Select - Rest. Factory settings control indicator tires
4 - Select the desired option
- Not enabled (default)
- Activated

Trailer Stabilizer
For those who llevais trailer is not over apply this amendment. Stabilize the
trailer.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Adaptation
3 - Select - Stabilizer trailer
4 - Select one of the two options:
- Not enabled (default)
- Activated

Disable Mode Transport

1 - Module 19 - diagnosis interface for data bus. Code (20103)
2 - Adaptation
3 - Mode of transport
- Off (default)
- Activated

Vehicle battery state (SOC)

1 - Give contact
2 - Remove Contact
3 - Hold the "0.0" button on the instrument panel
4 - Expecting kilometers are cleared
5 - Sale Set time first and then the SOC

Dynamic adaptation brake release

With this mod, we can make our vehicle snatch a little more to the rally. Strong
default being prevents wheel spin at the start.
1 - Module 03 - Electronic brake. Code (40168/20103)
2 - Select - Reduction torn swing - Options: (Strong - Normal - maximum - Off)
(Torque limitation: Off-On)
3 - Select options - (Strong - Normal - maximum - Off) (Torque limitation: Off-
On)
4 - Select Torque limitation
5 - Change the desired value.

MENUS / SCREENS / OPTIONS

-------------------------------------------------- ---------------------------------
------------

Test needle mode when the ignition

With this mod, by making contact makes the staging or test needle, is a very
striking mod.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding
3 - Byte 1
4 - Enable Bit 0
Easier still:
1 - Applications

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

2 - Test-Gauge Needle sweep

3 - On

Chronometer in FIS
With this mod, you will add a timer in the FIS.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding
3 - Byte 1
4 - Enable Bit 3
Another way:
1 - Applications
2 - Lap timer
3 - Select the desired

FIS liters refueled

With this mod, you will add the function of liters you have to refuel.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding
3 - Byte 10
4 - Enable Bit 4
Easier still:
1 - Applications
2 - Refuel quantity in dashboard
3 - On
It shows the liters of 5 in 5. Full Deposit = 45 liters, full tank shows three
stripes.

Disable seat belt warning

With this mod, you can disable the audible and visual warning belts.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding
3 - Byte 1
4 - Disable Bit 1
Another way :
1 - Adaptation
2 - Select - Disable belt warning
3 - Select one of the two options:
- No (default)
- If
Another way :
1 - Applications
2 - Seatbelt warning
3 - Select the desired

FIS oil temperature

With this mod, you add the oil temperature in the FIS
1 - Box Module 17- instruments- Code (25327)
2 - Extended Coding
3 - Byte 10
4 - Enable Bit 1
Another way :
1 - Adaptation
2 - Select - Display of oil temperature
3 - Select one of the two options:
- Yes (default)
- Do not
Another way:
1 - Applications
2 - oil temperature in Dis
3 - Select the desired

FIS Compass (Bearing browser)

With this mod, you will add the compass in the FIS (Only if you have other
browser)
1 - Box Module 17- instruments- Code (25327)
2 - Extended Coding
3 - Byte 10
4 - Enable Bit 6
Another way :
1 - Coding extended (Text mode)
2 - Navigation / Compass - Switch to SI
3 - Indicator compass --- Lower position (Change what you want)

Digital odometers in FIS

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

With this mod, you add the digital speedometer in the FIS (You have to select it
on the screen of Settings)
1 - Module 17 - Code Box instruments- (25327)
3 - Adaptation
4 - Select - Digital Tachometer
5 - Select one of three options:
- Indication
- No indication
- Not available

Personal consumption adjustment Display FIS

With this mod, you can calibrate consumption if you see that do not fit what
you think.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select- Correc.del indic.de consumption / combustion scope - Options:
(100%)
4 - Change value. Default 100%
5 - The adjustment allows increments of 1%, maximum and minimum values
​are 85 (%) and 115 (%).

Put FIS carbon background

With this mod, we change the background FIS Carbon mode.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select - Display Image
4 - Select one of the options:
- Option 1 (default)
- Option 2 (Carbon)

Activated carbon background Infotainment

With this mod, change the background screen infotainment to Carbon mode.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Extended Code (Text mode)
3 - Byte 17 Skinning
4 - Select Skin 3

Change Home Screen

With this mod, we change the screen that starts the infotainment.
1 - Module 17 - Code Box instruments- (25327)
2 - Extended Coding (Text mode)
3 - Select - Initial Screen
4 - Select one of eight options
- Option 1 (default)
- Rest

Activating Driving Mode menu Car / CAR

With this mod, we activate a new screen infotainment. driving school mode. It
is a pijada, does not show too much,
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function Adaptations Gen 2
4 - Search submenu - Menu display driving school
5 - Change value to ON
6 - Without leaving the submenu search - Menu display driving school over
threshold
7 - Change value to ON
8 - Select - Car List Function CAN Gen 2
9 - Search submenu - Driving school
10 - Change value Available
11 - Search submenu - Driving school bus msg
12 - Change value comfort databus

DRL control from the CAR menu

With this mod, we activate a new option in Settings-lights where we can
activate or deactivate the DRL.
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - Daytime Running Light
4 - Tagfahrlicht Aktivierung oder durch BAP bedienfolge moeglich
5 - Change value to On
Another way :
1 - Applications
2 - DRL settings in head unit

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

3 - Select On

Change logo radio (FR, Cupra, Ecomotive)

With this mod, you can change the initial logo.
1 - Module 5F - Information Electronics 1. Code (20103)
2 - Adaptation
3 - Byte 18 Screenings
Value in 0 - Seat Normal
Value in 1 - Seat FR
Value in 2 - Seat Cupra
Value in 3 - Seat Ecomotive
Value in 5 - Seat Xperience
Value in 6 - Seat FR Line

Control interior lighting by zones from the CAR Menu

With this mod, we activate new options in Settings-lights where we can control
the lights by area.
1 - Module 09 - Electronic. Code (31347)
2 - Extended Code (Bytes Mode)
3 - Byte 17
4 - Enable Bit 3 (Control ambient light)
5 - Enable Bit 2 (All Areas)
6 - Enable Bit 1 (light intensity door)

Rear wiper on screen

With this mod, we activate the comfort mode back clean
1 - Module 09 - Electronic. Code (31347)
2 - Adaptation
3 - wiper
4 - Menuesteuerung konfortwischen HW
5 - Change value to On

Engineer mode or Green Menu

With this mod, we activate the engineer mode. Vallais be careful not to roll.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Select CHANGE SERVICE
3 - development mode.
4 - Adaptation
5 - Development Mode
6 - Change to On.
- Restart Infotainment
- Hold the Menu button and hold until you exit the menu updates and not let go
until you exit the menu engineer.

Change system language

With this mod, we can change the system language.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Select - Language
4 - Select language

Menu Display Compass - OFF ROAD WITH AND WITHOUT NAVI

1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function Adaptations Gen 2
4 - Search submenu - Menu compass display (ON)
5 - Search submenu - Menu display compass over threshold (ON)
6 - Select - Car Function List Bap Gen 2
7 - Search submenu - Compass 0x15 (ON)
8 - Search submenu - 0x15 Compass msg bus (data bus comfort)
9 - Byte 24 Navigation System
10 - Change value to On.
This mod does not allow all functions without NAVI.
Logically altitude and compass does not display data.
Also reports a fault in the module 5F saying that environmental data missing
(Only reports to do analysis with OBDeleven, nothing comes on screen)
A normal error and do not have to worry.
With NAVI everything works 100%
If you want me to show the angle of rotation of the wheels on this menu you
have to make the mod Slope Angle of View menu.

Menu Display Angle of Slope - angle of rotation of the wheels

With this modification you can add new functionality to Mod OFFROAD Display
Menu.

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

By itself does not work, you must have activated the OFFROAD menu.
We will show graphically the angle of rotation of the wheels to turn the wheel.
1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function Adaptations Gen 2
4 - Search submenu - Menu display angle of stope (ON)
5 - Search submenu - Menu display angle of stope over threshold (ON)
6 - Select - Car Function List Bap Gen 2
7 - Search submenu - Angle of stope 0x24 (ON)
8 - Search submenu - 0x24 Angle of stope msg bus (data bus comfort)

Menu Display Driving School - driving Menu

1 - Module 5F - Electronic Information 1. Code (20103)
2 - Adaptation
3 - Select - Car Function Adaptations Gen 2
4 - Search submenu - Menu display driving school (ON)
5 - Search submenu - Menu display driving school over threshold (ON)
6 - Select - Car List Function CAN Gen 2
7 - Search submenu - Driving school (ON)
8 - Search submenu - Driving school msg bus (data bus comfort)

Displays temperature
With this mod we can change emperature degrees Celsius to Fahrenheit
1 - Module 17 - Code Box instruments- (25327)
3 - Extended Coding
4 - Temperature
5 - Select one of the two options:
- Celsius degrees
- Fahrenheit degrees

Display engine cylinder deactivation series BlueMotion

With this mod we can display in FIS when cylinders are deactivated in cars with
engines Bluemotion.
1 - Module 17 - Code Box instruments- (25327)
2 - Adaptation
3 - Cylinder Deactivation
4 - Change to Display

Last Edit: Nov 18, 2016 13:04:31 GMT by mikel

Quote
hart May 17, 2016 10:11:09 GMT
Guest
Egal welchen Wert ich für den Soundgenerator (A9) ich auswähle, die
Rückmeldung sagt "Falscher Wert". In keiner Anleitung steht ein security code
füs steuergerät, also gehe ich davon aus, dass dieser nicht benötigt wird?

Quote
aleksCore May 25, 2016 8:19:56 GMT
New Member

May 17, 2016 10:11:09 GMT hart said:

Egal welchen Wert ich für den Soundgenerator (A9) ich auswähle, die
Rückmeldung sagt "Falscher Wert". In keiner Anleitung steht ein
security code füs steuergerät, also gehe ich davon aus, dass dieser
nicht benötigt wird?

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

Stell die App auf English um, dann wird es gehen.

Seat Leon 5F

Posts: 2

Quote
OBDeleven May 25, 2016 12:04:42 GMT
Administrator

May 17, 2016 10:11:09 GMT hart said:

Egal welchen Wert ich für den Soundgenerator (A9) ich auswähle, die
Rückmeldung sagt "Falscher Wert". In keiner Anleitung steht ein
security code füs steuergerät, also gehe ich davon aus, dass dieser
nicht benötigt wird?

With latest version of app this bug was fixed.

Posts: 605

www.obdeleven.com

Quote
omck75 May 30, 2016 1:57:12 GMT via mobile
New Member
Gibt's Möglichkeit mirrorlink oder Video freischalten bzw. codieren?

Danke!

Posts: 11

Quote
havsgaard Jun 29, 2016 10:53:13 GMT
New Member
Anyone got working code for front windows tear drop wipe?

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

Posts: 21

Quote
omck75 Jun 30, 2016 18:40:41 GMT
New Member
DAB+ coding?

Posts: 11

Quote
havsgaard Jul 2, 2016 6:55:48 GMT
New Member
Tear drop wipe - confirmed working on seat leon fr 2015

Electronic control module 09-. Code (31347)

10 - Adaption
(17)-Windshield wiper-Traenenwischen Front Status - set to active

Posts: 21

Quote
hpalxx Jul 5, 2016 6:30:50 GMT
New Member
Does anyone know the login code for control unit 17 "dashboard" for Model
year 2016?

The old login code "20103" does not work any more.

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

Posts: 13

Quote
omck75 Jul 5, 2016 16:18:21 GMT via mobile
New Member
Kann jemand daB Radio freischalten oder freischalten mit Codierung.

Posts: 11

Quote
Lord Elmchen Jul 5, 2016 16:51:22 GMT
New Member
omck75: Mit Software kann man keine fehlende Hardware herbeizaubern.

Posts: 1

Quote
mikel Jul 6, 2016 0:36:02 GMT
Moderator
Module 17 New code activation 25327

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

Posts: 28

Quote
omck75 Jul 6, 2016 1:27:48 GMT via mobile
New Member
Video freischalten für Credits,funktioniert auch ohne iPod?

Posts: 11

Quote
hpalxx Jul 7, 2016 18:37:25 GMT via mobile
New Member

Jul 6, 2016 0:36:02 GMT mikel said:

Module 17 New code activation 25327

Sorry, but does not work on my Leon 5F MJ2016

Posts: 13

Quote
mikel Jul 9, 2016 22:32:27 GMT
Moderator
Passwords for modules UC
01: 27971
03: 40168
09: 31347
10: 71679
13: 14117
17: 25327 & 20103
19: 20103
44: 19249
5F: 20103
A5: 20103

Posts: 28

Quick Reply Reply

Guest Name:

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]
Coding&Adaptations | OBDeleven

Post Quick Reply

Shoutbox

Audi allroad: Want to know if using the longcode will cost me anything extra for the
changes? Sept 21, 2017 15:13:24 GMT

theoldboy: Audi allroad if you are using Pro then no extra cost for anything other than when
you use an app which will ask you for credits Sept 23, 2017 8:26:40 GMT

dv52 (Australia): Audi allroad: Assuming you have a PRO, there are no additional charges
(nor credits) required for changes to Coding or adaptation channels if you make the changes

Shout as:

0/256
Send Cancel

Click here to remove banner ads from this forum.

This Forum Is Hosted For FREE By ProBoards

Get Your Own Free Forum!
Terms of Service | Privacy Policy | Notice | FTC Disclosure | Report Abuse | Report Ad | Advertise Here

http://obdeleven.proboards.com/thread/764/coding-adaptations[15/10/2017 16:28:01]