Dual Broadband Antenna
65° 1.4 m X-polarized RET Antenna
Horizontal Beamwidth: 65o
Part Number: Electrical Downtilt: Adjustable
Gain: 15/ 18 dBi
RA21.7750.00 Connector Type: 7/16 DIN female
12.9 / 15.9 dBd
1710-2170 MHz
The Powerwave broadband antenna design is based on a patented stacked aperture-
coupled patch technology, which provides high isolation performance and a wide VSWR
bandwidth. The antennas have superior radiation patterns due to a unique reflector design
824-960
that provides a very small variation of the -3dB horizontal beam width over the frequency
band as well as a high front-to-back ratio. Powerwave broadband antennas come with
manually adjustable electrical tilt (MET) for tuning flexibility of tilt angles. This design
ensures the highest possible cross-polar discrimination value.
Key Benefits:
• Excellent broad- and multi-band capabilities
• Polarization purity maximizes diversity gain
• Excellent pattern performance and high gain over
frequency
• Guaranteed passive intermodulation performance
• Light, slim and robust design
Dual Broadband Antenna
Dual Broadband Antenna
824-960/1710-2170 MHz
Electrical Specifications
Frequency band (MHz) 824-960 1710-1990 1920-2170
Gain (dBi) 15 ± 0.5 17.3 ± 0.3 18 ± 0.4
Polarization dual linear ± 45° dual linear ± 45° dual linear ± 45°
Nominal impedance (W) 50 50 50
VSWR >1.5:1 >1.5:1 >1.5:1
Isolation between inputs (dB) >30 >30 >30
Horizontal -3dB beam width 68° ± 3° 67° ± 2° 62° ± 4°
Tracking, Horizontal plane, ±60° <1.0 dB <1.5 dB <1.5 dB
Electrical down tilt range (adjustable) 2° to 12° 0° to 8° 0° to 8°
Vertical Beam width -3dB MHz 14° ± 2° 7° ± 0.5° 6.2°±0.4°
Side lobe suppression, 1st upper (dB) >21,20,17,16@2,4,8,12° >18,17,15,14@0,2,4,8° >18,17,15,14@0,2,4,8°
Side lobe suppression, Vertical Upper (dB) >12 >12 >12
Vertical beam squint <1° <1° <1°
Front-to-back Ratio (dB) >26 >30 >30
Front-to-back Ratio, Total Power (dB) >26 >25 >25
Cross-polar discrimination (XPD) 0° (dB) >17 >18 >18
Cross-polar discrimination (XPD) ±60° (dB) >11 >10 >10
IM3, 2Tx@43dBm (dBc) -153 -153
IM7, 2Tx@43dBm (dBc) -160
Power Handling, Average per input (W) 300 250 250
Power Handling, Average total (W) 600 500 500
All specifications are subject to change without notice. Please for complete performance data.
900MHz 2000MHz
Typical Horizontal and Vertical 7750.00 Patterns
Mechanical Specifications
Connector type (6 pcs) 7/16 DIN female
Connector position Bottom
Dimensions, HxWxD 1621mm x 280mm x 125mm (5’5.2” x 11” x 5”)
Weight, including brackets 19 kg (41.8 lbs)
Wind load, frontal, 42 m/s, Cd=1 435N (98 lbf)
Survival wind speed 70 m/s
Weatherproofing According to T1102
Radome material GRP
Radome colour Grey (RAL 7035 on all visible plastic parts)
Packing size HxWxD 1550mm x 355mm x 255mm (61”x14”x10”)
Shipping weight including bracket kit 23kg (50.6lbs)
Mounting Pre-mounted standard brackets
D031-08467 Rev. A
Main European Office Main Asia-Pacific Office
Corporate Headquarters
Antennvägen 6 23 F Tai Yau Building
Powerwave Technologies, Inc. Tel: 714-466-1000
SE-187 80 Täby 181 Johnston Road
1801 East St. Andrew Place Fax: 714-466-5800
Sweden Wanchai, Hong Kong
Santa Ana, CA 92705 USA www.powerwave.com
Tel: +46 8 540 822 00 Tel: +852 2512 6123
Fax: +46 8 540 823 40 Fax: +852 2575 4860
©Copyright 2006, Powerwave Technologies, Inc. All Rights reserved. Powerwave, Powerwave Technologies, The Power in Wireless and the Powerwave logo are registered trademarks of Powerwave Technologies, Inc.
