Publication No: 76099a
SUPERIOR ISOLATING SYSTEMS... WORLDWIDE
SERIES 60 STEEL BALL VALVE
The Series 60 Ball Valve is very versatile in application,
designed generally in accordance with BGC/PS/V6 and is
suitable for use with a wide range of gases and fluids
including natural and manufactured gases, air, oil,
water, and LP steam.
! Resilient seats
compensate for wear.
! Fire tested design. ! Quarter turn
! Blow-out proof stem. operation.
! Compact design ! Self indicating
requires minimum handle.
installation space.
! Optional
! Built-in anti-static locking
device. facility.
! Energised seats for ! Optional
positive sealing at block and
all pressures. bleed
construction
with pressure
! Where covered by the relief plug on
requirements of the Pressure request.
Equipment Directive these
products are produced in full
compliance and carry CE marking.
Aqua-Gas AVK Ltd.
Cert No: FS 32794
Registered in England No: 1838290 Part of the AVK Group
providing Global Solutions.
SPECIFICATIONS
SERIES 60 STEEL BALL VALVE
SERVICE CONDITIONS DIMENSIONS & WEIGHTS
Maximum working pressure: 19 Barg (275 psig). Nominal Bore A B C D E F Kg
Bore
Temperature range: -20°C to +200°C.
20mm (¾") 17.5 117 58.5 74 92 250 5
25mm (1") 17.5 127 63.5 74 92 250 5.5
50mm (2") 37.5 178 75 100 116 250 11
MATERIALS OF CONSTRUCTION
DESCRIPTION MATERIAL
Body casting Carbon steel BS1504-161-480.
Ball and stem 13% chrome BS970-410-S21.
Seats p.t.f.e.
‘O’ rings Nitrile rubber.
F
D
E
Bore A
DIVISIONAL OFFICE: HEADQUARTERS:
Donkin Valves, Aqua-Gas AVK Limited,
Derby Road, P.O. Box 143 • Rushmills
Chesterfield. S40 2EB. Northampton NN4 7ZU
Telephone: +44 (0) 1246 558707 Telephone: 01604•601188
Fax: +44 (0) 1246 558712 Fax: 01604•604818
E-Mail: donkinvalves@aquagasavk.co.uk E-Mail: info@aquagasavk.co.uk
www.donkinvalves.com www.aquagasavk.co.uk
The designs, materials and specifications shown are subject to change without notice due to our continuing programme of product development.
