Filter cartridge
amaPure HS
1. Introduction
The amaPure HS cartridge is an all polypropylene depth cartridge.
The unique, one-step melt blown process is used to create a graded
density which improves flow characteristics and increases dirt hold-
ing capacity when compared to other polypropylene cartridges.
The process thermally bonds the fibres together virtually eliminat-
ing media migration. Thermal bonding also eliminates the need for
a separate centre core, providing both high collapse strength and
enabling easy disposal through incineration.
2. Features 3. Food safety
■ Gradient pore structure Food safety
■ All polypropylene material The filter cartridges comply with the requirements of the ‘Food and
■ Excellent chemical compatibility Drug Administration (FDA)’ title 21 of the “Code of Federal Regula-
■ Nominal rated from 1 to 100 micron tions” 177.1520.
■ Low pressure drops
■ No fibre migration Bio safety
■ High solid loading capability The components of the filter cartridges (excl. O-rings and gaskets)
■ FDA listed material pass the USP Biological Reactivity and Chemical-Physical tests for
■ Rigid structure CLASS VI plastics.
Extractable substances
The cartridges are free of surfactants, lubricants, anti static agents,
binders and adhesives.
4. Product/Performance specifications 5. Water flow rate for 10"cartridge
Filter medium : polypropylene
Hardware : polypropylene
Centre core : internally extruded centre core
End cap seal : thermally bonded
Gaskets/O-rings : silicone, EPDM, Buna-N, Viton®,
polyethylene (for X9)
Dimensions
External diameter : 63 mm
Length : see ordering information
Filtration area : 0.05 m²/10" cartridge
mm
Maximum recommended differential pressure
2.4 bar
mm
Maximum operating temperature
x: Flow rate
80 °C
y: Clean pressure drop
6. Ordering code
Example
amaPure HS 1 30 X7 S
Cartridge type Micron rating [µm] Nominal length [inch] Cartridge style O-Ring material
1 9.75 (248 mm) X0 S=Silicone
3 10 (254 mm) X3 E=EPDM
5 19.5 (495 mm) X4 V=Viton®
10 20 (508 mm) X7 N=Buna-N
20 29.25 (743 mm) X8
30 30 (762 mm) X9
50 39 (991 mm)
75 40 (1016 mm)
100 Other lengths on request
X0=DOE, no gaskets, X3 = SOE with external 222 O-rings, X4=DOE with flat gaskets, X7=SOE with fin end, bayonet and external 226 O-
Rings, X8=SOE with fin end and external 222 O-Rings, X9=DOE with polyethylene soft gaskets
MAHLE Industrial Filtration (Benelux) B.V., P.O.Box 396, 1800 AJ Alkmaar - The Netherlands, Phone +31 (0) 72 5273400,
Fax +31 (0) 72 5125207, mahle.amafilter@mahle.com, http://www.mahle-industrialfiltration.com, 4415-01/2010
Filter cartridge amaPure HS 2
