VMC 1100 7" All-In-One Vehicle Computer

with Touch Screen and Multifunctional Tracker

Main Features
ŒŒ 7" WVGA TFT LCD Monitor with resistive touch screen ŒŒ GPS/WLAN/WWAN for wireless communication
ŒŒ Built-in Intel Atom® Dual Core E3825 1.33GHz ŒŒ Dual CAN bus 2.0B and optional OBDII (SAE J1939) for car diagnostic
ŒŒ Compact and fanless design ŒŒ Wide Range DC input from 9 ~ 36V
ŒŒ On screen programmable F1 ~ F5 function keys ŒŒ Military standard for vibration and shock
ŒŒ Support GPS/WWAN tracker function for car-safety ŒŒ SAE J1113, ISO7637-2 and SAE J1455 conformity for power design
ŒŒ RFID for ID identification ŒŒ CE/FCC/EMark
ŒŒ Built-in GPS (Option: Dead Reckoning Support)

Product Overview
VMC 1100, a new generation 7-inch vehicle mount computer with dual core Intel Atom® processor, is designed for transportation and harbor applications
requiring real-time vehicle tracking and job-dispatching. For real-time communication between driver and central control room, VMC 1100 provides
the capability of wireless connection from GPS, WLAN to WWAN. To get more data from accessories, it offers RS-232, RS-485, USB 2.0, GPIO, and LAN
connection. Dual CANBus 2.0B ( OBDII and J1939 protocol ), analog input and PWM are able to help to receive car status more quickly and correctly. Due
to the unique features above, VMC 1100 is perfect to used in harbor application from container truck, forklift, container stacker....

Specifications
General Expandable Storage
ŒŒ Cooling system: fanless ŒŒ 1 x SATAIII SATA DOM slot (available option 16GB/32GB/64GB)
ŒŒ Enclosure: plastic PC + ABS with aluminum die casting heatsink
ŒŒ Mounting: support VESA 75, stand mounting Expansion
ŒŒ Four SMA type antenna connectors of BT/Wi-Fi/WWAN/GPS ŒŒ 1 x Half size mini-PCIe socket (USB 2.0, PCIe 2.0)
ŒŒ Power input: 9 ~ 36VDC input with Ignition ŒŒ 1 x Full size mini-PCIe socket (USB 2.0, UART) for LTE module with 1 x
ŒŒ Power consumption: 26W external Mini-SIM
ŒŒ Ingress protection: front panel IP54 ŒŒ 1 x External module for OBD/RFID module option (USB 2.0, UART)
ŒŒ Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9")
ŒŒ Weight: I/O Interface-Front
-- N.W: 1.3kg ŒŒ F1 ~ F5 functions key
-- G.W: 1.6kg ŒŒ Light sensor
ŒŒ Internal Mic-in
LCD Panel ŒŒ 2 x Built-in 2W speakers
ŒŒ 7-inch TFT LCD panel with LED backlight
ŒŒ 3 x LED indicators (power mode, Storage and WWAN status)
ŒŒ 800 x 480 pixels (WVGA)
ŒŒ Brightness: 400 cd/m² (typical) I/O Interface-Lateral
ŒŒ Contrast ratio: 600:1 (typical) ŒŒ Right side
Touch Screen Sensor -- 1 x Micro SD card socket
ŒŒ 4-Wire resistant touch -- 1 x SIM card socket
ŒŒ Anti-glare coating surface -- 1 x USB 3.0 host type A connector
ŒŒ Transmission rate: 78 ± 3% -- 1 x Mic-in, Line-out
ŒŒ Left side
CPU & Chipset
-- 1 x Power button
ŒŒ Intel Atom® Dual Core E3825 1.33GHz
-- 1 x System reset button
Memory -- Volume up/down or brightness up/dow
ŒŒ One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB)
-- Default 4GB

Vehicle Mount Computer

www.nexcom.com

Dimension Drawing

75.00

75.00
144.97
DC IN 9-36V LAN RS-232 RS-232/
RS-485+CAN
GPIO/ADC/PWM

212.97 40.00
49.30
50.00

I/O Interface-Rear Environment

ŒŒ 1 x 5-Pin circular connector for power/ignition input ŒŒ Operating temperatures: ambient with air -20°C to 60°C
ŒŒ 1 x RJ45 for LAN ŒŒ Storage temperatures: -30°C to 80°C
ŒŒ 1 x RJ45 for full RS-232 with 0V/5V/12V power supply (0.5A) ŒŒ Relative humidity: 10% to 95% (non-condensing)
ŒŒ Vibration (random): 3g @5 ~ 500Hz
ŒŒ 1 x DB9 (male) for
ŒŒ Vibration
-- RX/TX or RS-485
-- Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
-- 2 x CAN Bus 2.0
-- Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
ŒŒ 1 x DB15 (female) for
ŒŒ Shock
-- GPS dead reckoning interface (optional)
-- Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and
-- 2 x PWM, 2 x Analog Input, 2 x GPO and 2 x GPI
semi-trailers=20g
-- Analog input requirement for voltages are measured
-- Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground
-- Channel: 2
equipment=75g
-- Voltage range: 0~ 38V
-- Resolution: 8 bit Power Design & Protection
-- Input requirement for frequency, speed ŒŒ Load dump and inductive load protection
-- Square wave ŒŒ Cold cranking protection
-- Channel: 2 ŒŒ Transient voltage protection
-- Frequency signal offset voltage range: 0~15VDC, 1Hz ~ 5KHz ŒŒ Electrostatic discharge protection
-- Protection: ±500V spike
Standards/Certifications
-- Frequency signal duty cycle range: 10%~90%
ŒŒ EMC
Communication Module -- CE, FCC class B, E-Mark
ŒŒ 1 x U-blox NEO-M8N module ŒŒ Power
-- SAE J1113
(support GPS/Gloness/QZSS/Galileo/Beidou)
-- SAE J1455
ŒŒ 1 x WLAN or Bluetooth module for optional
-- ISO 7637-2
ŒŒ 1 x WWAN module for optional

Power Management
ŒŒ Selectable boot-up & shut-down voltage for low power protection
Ordering Information
ŒŒ HW design ready for 8-level delay time on/off at user's self configuration ŒŒ VMC 1100-PR0 (P/N: 10VC0110011X0)
ŒŒ Power on/off ignition, software detectable 7" all-in-one vehicle computer with touch screen and multifunctional
ŒŒ Support S3 and S4 suspend mode; wake on RTC and SMS tracker and Intel Atom® Dual Core E3825 1.33GHz processor with 2GB
DDR3L, GPS module and GPS antenna
Operating System
ŒŒ Windows 10 ŒŒ Bundle Accessories
ŒŒ Windows 8 Professional, WES8 External power cable (13cm), Driver CD
ŒŒ Windows 7, WES7
ŒŒ Linux Fedora (kernel V3.2.0)

Vehicle Mount Computer

We reserve the right to change specifications and product descriptions at any time without prior notice. Last update: 10/25/2023