THERM DEVELOPER PM / A
DEVELOPER FOR THERMAL CTP PLATES
READY-TO-USE AND MONOCOMPONENT
CHARACTERISTICS: Excellent developing results. It contains aluminium protectors. It
maintains tanks and filters of plates Processor extremely clean,
reducing cleaning operations, due to encrustations. High stability. It is
recommended for use with plates processors with dipped brushes.
APPLICATION: The product is ready-to-use and it can be used both as developer and as
replenisher. We suggest anyhow to replace the bath at least once a month.
The product is suitable to following plates, with relevant working
temperatures:
Working Contact Replenishm. Antiox.
Brand and type of plates
Temp. time ml/mq ml/hr
AGFA ENERGY ELITE PRO 22 ° C (± 1°) 25-28” 100-120 120-140
KODAK CAPRICORN VT 23 ° C (± 1°) 25-35” 100-120 120-140
KODAK ELECTRA XD 23 ° C (± 1°) 25-30” 100-120 120-140
THERMAL KODAK SWORD 23 ° C (± 1°) 25-35” 100-120 120-140
PLATES FUJI BRILLIA LH-PCE 24 ° C (± 1°) 30-35” 100-120 120-140
HUAGUANG TP U 23 ° C (± 1°) 25-35” 100-120 120-140
CTP PLATE TP-S8 23 ° C (± 1°) 25-35” 100-120 120-140
IPAGSA UNIVERSE 02 23 ° C (± 1°) 25-35” 100-120 120-140
Physical state : Colour : Odour :
pH: > 13
LIQUID ORANGE ODOURLESS
Conductivity at 25°C: Boiling Point : Flash Point : Water solubility:
83 – 87 mS > 100°C NOT FLAMMABLE COMPLETE
PRECAUTIONS : Before using THERM DEVELOPER PM / A, read carefully its Safety Data
Sheet. We suggest to clean the Plate Processor with SOLVINE CTP and to rinse
carefully, to eliminate incrustations which could come off using product.
Storage temperature : + 5 / +25°C
PACKING : 20 liters plastic cans
200 liters drums
MR
Information given in this sheet is considered to be reliable and is provided in good faith but without guarantee.
V. 4 - 02 / 2020
Specifications subject to change without notice.
