PART ‘D’ – 277

PART – D
Schedule of Quantities

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 278

INDEX- PART-D

Sl. No. Particulars Page No.

1 INDEX 277

2 Civil Component 278-314

3 Electrical Component 315-319

4 Abstract of cost 320

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 279

ABSTRACT OF COST

Name of Work: Providing repairs to existing plumbing, drainage, tile flooring, doors
and ducts including internal electrical installations etc in Kakatiya Hall of Residence
(1.0K) at NIT Warangal-Reg. Complete Renovation of toilet, bathrooms, shafts and
approximately 60 damaged Hostel Rooms.

Civil Component

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Sub-Head 1 : EARTH WORK

Earth work in excavation by

mechanical means (Hydraulic
excavator) / manual means over areas
(exceeding 30cm in depth, 1.5m in
width as well as 10 sqm on plan)
1.1 including getting out and disposal of
excavated earth, lead up to 50m and
lift up to 1.5m,as directed by
Engineer-in-Charge.

1.1.1 150.00 Cum 180.77 27115.50

All kinds of soil

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 280

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Excavating trenches of required width

for pipes, cables, etc including
excavation for sockets, and dressing
of sides, ramming of bottoms,depth
upto 1.5 m, including getting out the
excavated soil, and then returning the
soil as required, in layers not
1.2
exceeding 20 cm in depth,including
consolidating each deposited layer by
ramming, watering,etc. and disposing
of surplus excavated soil as directed,
within a lead of 50 m :

1.2.1 All kinds of soil

1.2.1.1 Pipes, cables etc exceeding 80 mm 600.00 metre 358.65 215190.00

dia but not exceeding 300 mm dia

Sub-Head 2 :CONCRETE WORK

Providing and laying in position

Ready mixed concrete (RMC) / Site
batched design of mix M-10 grade
cement concrete for plain cement
concrete work, using cement content
as per approved design mix, including
pumping of concrete to site of laying
but excluding the cost of centering,
shuttering, finishing and
2.1
reinforcement, including admixtures
in recommended proportions as IS:
9103 to accelerate, retard setting of
concrete, improve workability
without impairing strength and
durability as per direction of
Engineer-in-charge. (Manufactured
sand can be used in RMC)

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 281

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Note 1:-Part of cement can be

substituted with Ground Granulated
Blast furnace slag (GGBS) to a
maximum of 30%. The physical and
chemical properties of GGBS shall
conform to IS: 12089-1987
(Reaffirmed 2008). Uniform blending
with content to be ensured in
accordance with clauses 5.2 and 5.2.1
of IS:456-2000
.Note 2:- Quantity of cementitious
material considered in this item is @
260 kg/cum (minimum 182kg OP
cement + 78kg GGBS).
Note 3:- Any excess cement required
as per mix design shall be met from
GGBS and nothing extra shall be paid
for such addition of GGBS.
Note 4:- Water Cement ratio in the
concrete mix shall not exceed 0.50
Concrete of M10 grade with
minimum cement content as above.

All works up to plinth level:

2.1.1 120.00 Cum 7810.61 937273.20
All works above plinth and upto floor
2.1.2 V level : 720.00 Cum 8172.82 5884430.40

Sub-Head 3 : REINFORCED CEMENT CONCRETE

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 282

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Steel reinforcement for R.C.C. work

including straightening, cutting,
bending, placing in position and
3.1 binding all complete above plinth
level.

Thermo-Mechanically Treated bars of

3.1.1 grade Fe-500D or more. 3000.00 Kg 109.84 329520.00

Providing and laying in position

Ready mixed concrete(RMC)/ Site
batched design of mix M-25 grade
cement concrete for reinforced
cement concrete work, using cement
content as per approved design mix,
including pumping of concrete to site
of laying but excluding the cost of
centring, shuttering, finishing and
reinforcement, including admixtures
3.2 in recommended proportions as
IS:9103 to accelerate, retard setting of
concrete, improve workability
without impairing strength and
durability as per direction of
Engineer-in-charge.(Manufactured
sand can be used in RMC)

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 283

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Note 1:- Part of cement can be

substituted with Ground Granulated
Blast furnace slag (GGBS) to a
maximum of 30%. The physical and
chemical properties of GGBS shall
confirm yo IS:12089-
1987(Reaffirmed 2008). Uniform
blending with cement to be ensured in
accordance with clauses 5.2 and 5.2.1
of IS:456-2000.
Note 2:- Quantity of cementitious
material considered in this item is
@360 kg/cum (250 kg OP
cement+110 Kg GGBS)

Note 3:- Any excess cement required

as per mix design shall be met from
GGBS and nothing extra shall be paid
for such addition of GGBS.
Note 4:- Water Cement ratio in the
concrete mix shall not exceed 0.5.
Concrete of M25 grade with
minimum cement content as above.

All works upto plinth level

3.2.1 3.00 Cum 9147.94 27443.82
All works above plinth level upto
3.2.2 floor V level 15.00 Cum 9519.00 142785.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 284

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Extra for R.C.C./ B.M.C/ R.M.C.

work above floor V level for each
3.3 four floors or part thereof. 120.00 Cum 362.21 43465.20

Sub-Head 4: MASONRY WORK

Brick work with non modular fly ash
bricks conforming to IS:12894, class
designation 7.5 average compressive
4.1 strength in super structure above
plinth level up to floor V level in :

Cement mortar 1:6 (1 cement : 6

4.1.1 Coarse sand) 10.00 Cum 8373.61 83736.10

Half brick masonry with non modular

fly ash bricks of class designation 7.5,
conformingio IS :12894, in super
structure above plinth and upto floor
4.2 V level.

Cement mortar 1 : 4 (1 cement : 4

4.2.1 coarse sand) 1600.00 Sqm 1062.27 1699632.00

Extra for providing and placing in

position 2 Nos 6mm dia. M.S. bars at
4.3 every third course of half brick 1600.00 Sqm 106.73 170768.00
masonry.

Sub Head 5 : CLADDING WORK

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 285

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing 18 mm thick

gang saw cut, mirror polished,
premoulded and prepolished, machine
cut for kitchen platforms, vanity
counters, window sills, facias and
similar locations of required
size,approved shade, colour and
texture laid over 20 mm thick base
cement mortar 1:4 (1 cement : 4
5.1 coarse sand), joints treated with white
cement, mixed with matching
pigment, epoxy touch ups, including
rubbing, curing, moulding and
polishing to edges to give high gloss
finish etc. complete at all levels.

Granite stone slab colour black,

Cherry/Ruby red (Shed as approved
5.1.1 by Engineer-in-Charge)

Area of slab upto 0.50 sqm

5.1.1.1 30.00 Sqm 5513.32 165399.60
Area of slab over 0.50 sqm
5.1.1.2 220.00 Sqm 5231.01 1150822.20
Extra for providing opening of
required size & shape for wash
basin/kitchen sink in kitchen
platform, vanity counter and similar
location in marble/ Granite/ stone
5.2 work, including necessary holes for 252.00 Each 996.75 251181.00
pillar taps etc. including moulding,
rubbing and polishing of cut edges
etc. complete

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 286

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing Ist quality

ceramic glazed wall tiles conforming
to IS: 15622 (thickness to be specified
by the manufacturer), of approved
make, in all colours, shades except
burgundy, bottle green, black of any
size (minimum 0.3 mtr x 0.45 mtr) as
approved by Engineer-in-Charge, in
skirting, risers of steps and dados,
5.3 over 12 mm thick bed of cement 8000.00 Sqm 1291.33 10330640.00
mortar 1:3 (1 cement : 3 coarse sand)
and jointing with grey cement slurry
@ 3.3kg per sqm, including pointing
in white cement mixed with pigment
of matching shade complete.

SH: Wood and PVC Work

Providing and fixing ISI marked flush
door shutters conforming to IS : 2202
(Part I) decorative type, core of block
board construction with frame of 1st
class hard wood and well matched
6.1 teak 3 ply veneering with vertical
grains or cross bands and face veneers
on both faces of shutters.

35 mm thick including ISI marked

Stainless Steel butt hinges with
6.1.1 necessary screws. 160.00 Sqm 3537.91 566065.60

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 287

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing IS : 12817

marked stainless steel butt hinges
6.2 (heavy weight) with stainless steel
screws etc. complete :
100x60x2.50 mm
6.2.1 1300.00 Each 108.31 140803.00
Providing and fixing aluminium
sliding door bolts ISI marked
anodised (anodic coating not less than
grade AC 10 as per IS : 1868)
6.3
transparent or dyed to required colour
or shade with nuts and screws etc.
complete :

250x16 mm
6.3.1 550.00 Each 265.41 145975.50

Providing and fixing aluminium

tower bolts ISI marked anodised
(anodic coating not less than grade
AC 10 as per IS : 1868 ) transparent
6.4 or dyed to required colour or shade
with necessary screws etc. complete :

250x10 mm
6.4.1 55.00 Each 117.28 6450.40
Providing and fixing aluminium
handles ISI marked, anodised (anodic
coating not less than grade AC 10 as
per IS : 1868) transparent or dyed to
6.5 required colour or shade with
necessary screws etc. complete :

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 288

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

125 mm
6.5.1 1050.00 Each 67.47 70843.50
Providing and fixing aluminium work
for doors, windows, ventilators and
partitions with extruded built up
standard tubular sections/ appropriate
Z sections and other sections of
approved make conforming to IS: 733
and IS: 1285, fixing with dash
6.6 fasteners of required dia and size,
including necessary filling up the
gaps at junctions, i.e. at top, bottom
and sides with required EPDM
rubber/ neoprene gasket etc.

Aluminium sections shall be smooth,

rust free, straight, mitred and jointed
mechanically wherever required
including cleat angle, Aluminium
snap beading for glazing / paneling,
C.P. brass / stainless steel screws, all
complete as per architectural
drawings and the directions of
Engineer-in-charge. (Glazing,
paneling and dash fasteners to be
paid for separately) :

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 289

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

PA6 grade sleeve for fixing frame to

finished wall as per IS 1367 : Part 1
to 14, plastic packers, plastic caps and
necessary stainless steel screws etc.
Profile of frame, sash & mullion (if
required) shall be mitred cut and
fusion welded/mechanically jointed
duly sealed at all corners, including
drilling of holes for fixing hardware
and drainage of water etc. After
fixing frame the gap between frame
and adjacent finished wall shall be
filled with weather proof silicon
sealant over backer rod pf approved
size and quality, all complete as per
approved drawing conforming to
CPWD specification & direction of
Engineer-in-Charge.

6.6.1 For fixed portion

Powder coated aluminium (minimum
thickness of powder coating 50
6.6.1.1 micron) 1575.00 Kg 540.69 851586.75

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 290

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing glazing in

aluminium door, window, ventilator
shutters and partitions etc. with
EPDM rubber / neoprene gasket etc.
complete as per the architectural
drawings and the directions of
6.7 engineer-in-charge . (Cost of
aluminium snap beading shall be paid
in basic item):

With float glass panes of 5 mm

thickness (weight not less than 12.50
6.7.1 kg/sqm) 210.00 Sqm 1533.01 321932.10

Sub-Head 7 : STEEL WORK

Steel work welded in built up
sections/ framed work, including
cutting, hoisting, fixing in position
7.1 and applying a priming coat of
approved steel primer using structural
steel etc. as required.

In gratings, frames, guard bar, ladder,

railings, brackets, gates and similar
7.1.1 works. 5000.00 Kg 175.78 878900.00

Sub-Head 8 : FLOORING

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 291

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and laying rectified

(anti skid) Glazed Ceramic floor tiles
of size 300x300 mm or more
(thickness to be specified by the
manufacturer), of 1st quality
conforming to IS : 15622, of
approved make, in all colours, shades,
except White, Ivory, Grey, Fume Red
Brown, laid on 20 mm thick Cement
8.1 Mortar 1:4 (1 Cement : 4 Coarse 3000.00 Sqm 1465.94 4397820.00
sand), jointing with grey cement
slurry @ 3.3kg/sqm including
pointing the joints with white cement
and matching pigments etc.,
complete.

Grouting the joints of flooring tiles

having joints of 3 mm width, using
epoxy grout mix of 0.70 kg of
organic coated filler of desired
8.2 shade(0.10 kg of hardener and 0.20
kg of resin per kg), including
filling/grouting and finishing
complete as per direction of
Engineer-in-charge.
8.2.1 Size of Tile 300x300 mm 3000.00 Sqm 199.60 598800.00
Deduct for not grouting the joints
with white cement and matching
pigment in the items of fixing of
8.3 vitrified tiles or Anti skid ceramic 3000.00 Sqm -44.00 -132000.00
tiles ( Size 300x300)

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 292

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and laying Vitrified tiles in

floor in different sizes (thickness to
be specified by the manufacturer)
with water absorption less than 0.08%
and conforming to IS:15622, of
approved brand & manufacturer, in
all colours and shade, laid on 20 mm
thick cement mortar 1:4 (1 cement: 4
8.4 coarse sand) jointing with grey
cement slurry @3.3 kg/sqm including
grouting the joints with white cement
and matching pigments etc. The tiles
must be cut with the zero chipping
diamond cutter only .

Laying of tiles will be done with the

notch trowel, plier, wedge, clips of
required thickness, leveling system
and rubber mallet for placing the tiles
gently and easily.

Double charge vitrified tile polished

8.4.1 finish of size

Size of Tile 600 x 600 mm

8.4.1.1 882.00 Sqm 1480.46 1305765.72
Deduct for not using 20 mm thick
cement mortar 1:4 (1 cement :
4coarse sand) bedding in laying of
8.5 floor tiles and jointing with grey 900.00 Sqm -889.80 -800820.00
cement slurry @ 3.3kg/sqm

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 293

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Fixing glazed/ Ceramic/ Vitrified

floor tiles with cement based high
polymer modified quick-set tile
adhesive (Water based) conforming to
8.6 IS: 15477, in average 3mm thickness. 900.00 Sqm 767.14 690426.00

Providing and laying Vitrified tiles in

different sizes (thickness to be
specified by manufacturer) with water
absorption less than 0.08 % and
conforming to I.S. 15622, of
approved make in all colours & shade
in skirting, riser of steps, over 12 mm
thick bed of cement mortar 1:3
8.7 (1cement: 3 coarse sand), jointing
with grey cement slurry @ 3.3kg/sqm
including grouting the joint with
white cement & matching pigments
etc. complete.

Size of Tile 600x600 mm

8.7.1 138.60 Sqm 1652.98 229103.03

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 294

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing Galvanized M.S.

bat clamp of approved design to sand
cast iron/ cast iron (spun) pipes
comprising of M.S. flat brackets
made of 50x5 mm flat of specified
shape, projecting 75 mm outside the
wall surface and fixed on wall with
4nos, 6mm dia expansion hold
fasteners, including drilling necessary
holes in brick wall/ CC/RCC surface
and the cost of bolts etc. The pipes
8.8
shall be fixed to the already fixed
brackets with the help of 30 mm x1.6
mm galvanised M.S. flats of specified
shape and of total length 420 mm and
shall be fixed with M.S. nuts, bolts, &
washers of size 25x6 mm, one bolts
on each side of the pipe.

Total bracket length 580 mm of

approved shape and design (for single
8.8.1 110/75 mm dia pipe ) 4500.00 Each 282.17 1269765.00

Sub-Head 9: FINISHING

12 mm cement plaster of mix :

9.1
1:6 (1 cement: 6 fine sand)
9.1.1 1500.00 Sqm 339.50 509250.00
15 mm cement plaster on the rough
side of single or half brick wall of
9.2 mix :

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 295

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

1:6 (1 cement: 6 fine sand)

9.2.1 3000.00 Sqm 390.07 1170210.00

6 mm cement plaster of mix :

9.3

1:3 (1 cement: 3 fine sand)

9.3.1 500.00 Sqm 305.99 152995.00

Finishing with Epoxy paint (two or

more coats) at all locations prepared
and applied as per manufacturer's
9.4 specifications including appropriate
priming coat, preparation of surface,
etc. complete.

9.4.1 On steel work 200.00 Sqm 246.21 49242.00

Finishing walls with Acrylic Smooth
9.5 exterior paint of required shade :

Old work (Two or more coat applied

@ 1.67 ltr/ 10 sqm) on existing
9.5.1 cement paint surface). 3300.00 Sqm 122.98 405834.00

Painting with synthetic enamel paint

of approved brand and manufacture to
give an even shade :
9.6.1

Two or more coats on new work.

9.6.1.1 2200.00 Sqm 158.77 349294.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 296

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and applying white cement

based putty of average thickness 1
mm, of approved brand and
manufacturer, over the plastered wall
9.7 surface to prepare the surface even 6500.00 Sqm 158.93 1033045.00
and smooth complete.

Applying priming coats with primer

of approved brand and manufacture,
having low VOC (Volatile Organic
9.8 Compound ) content.

With water thinnable cement primer

on wall surface having VOC content
9.8.1 less than 50 grams/litre. 6500.00 Sqm 75.31 489515.00

Wall painting with premium acrylic

emulsion paint of interior grade,
having VOC (Volatile Organic
Compound ) content less than 50
grams/ litre. of approved brand and
9.9 manufacture, including applying
additional coats wherever required to
achieve even shade and colour.

Two coats.
9.9.1 6500.00 Sqm 145.43 945295.00
Sub-Head 10 : DISMANTLING AND DEMOLISHING

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 297

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Demolishing cement concrete

manually/ by mechanical means
including disposal of material within
10.1 50 metres lead as per direction of
Engineer - in - charge.

Nominal concrete 1:3:6 or richer mix

10.1.1 (i/c equivalent design mix) 900.00 Cum 2479.14 2231226.00
Dismantling doors, windows and
clerestory windows (steel or wood)
shutter including chowkhats,
10.2 architrave, holdfasts etc. complete
and stacking within 50 metres lead :

Of area 3 sq. metres and below

10.2.1 210.00 No. 373.97 78533.70
Demolishing brick work manually/ by
mechanical means including stacking
of serviceable material and disposal
of unserviceable material within 50
10.3 metres lead as per direction of
Engineer-in-charge..

10.3.1 In cement mortar 400.00 Cum 2098.19 839276.00

Dismantling doors, windows and
clerestory windows (steel or wood)
shutter including chowkhats,
10.4 architrave, holdfasts etc. complete
and stacking within 50 metres lead :

Of area 3 sq. metres and below

10.4.1 450.00 Each 373.97 168286.50

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 298

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Dismantling old plaster or skirting

raking out joints and cleaning the
surface for plaster including disposal
10.5 of rubbish to the dumping ground 8000.00 Sqm 55.66 445280.00
within 50 metres lead.

Dismantling steel work manually/ by

mechanical means in built up sections
without dismembering and stacking
10.6 within 50 metres lead as per direction 33500.00 Kg 3.92 131320.00
of Engineer-in-charge.

Dismantling C.I. or asbestos rain

water pipe with fittings and clamps
10.7 including stacking the material within
50 metres lead :

10.7.1 75 to 80 mm dia pipe 250.00 meter 77.10 19275.00

10.7.2 100 mm dia pipe 250.00 meter 79.44 19860.00
Dismantling G.I. pipes (external
work) including excavation and
refilling trenches after taking out the
pipes, manually/ by mechanical
means including stacking of pipes
10.8
within 50 metres lead as per direction
of Engineer-in-charge :

15 mm to 40 mm nominal bore
10.8.1 300.00 meter 152.57 45771.00
Above 40 mm nominal bore
10.8.2 200.00 meter 164.38 32876.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 299

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Credit for the sale of dismantled material

10.9
GI PIPES
10.9.1 500.00 meter -15.00 -7500.00
CI PIPES
10.9.2 500.00 meter -50.00 -25000.00
Doors and windows
10.9.3 450.00 Each -300.00 -135000.00
steel sections
10.9.4 33500.00 Kg -25.00 -837500.00
Disposal of building rubbish / malba /
similar unserviceable, dismantled or
waste materials by mechanical means,
including loading, transporting,
unloading to approved municipal
dumping ground or as approved by
10.6 Engineer-in-charge, beyond 50 m 1300.00 Cum 268.82 349466.00
initial lead, for all leads including all
lifts involved.

Sub-Head 11 : SANITARY INSTALLATIONS

Providing and fixing white vitreous

china pedestal type water closet
(European type W.C. pan) with seat
and lid, 10 litre low level white
P.V.C. flushing cistern, including
flush pipe, with manually controlled
11.1 device (handle lever), conforming to
IS : 7231, with all fittings andfixtures
complete, including cutting and
making good the walls and floors
wherever required :

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 300

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

W.C. pan with ISI marked white solid

11.1.1 plastic seat and lid 180.00 Each 6635.69 1194424.20

Providing and fixing white vitreous

china flat back half stall urinal of size
280x345x690 mm (Italian collection
hindware rhine 96008 or equivalet
make) with fittings, standard size C.P.
brass flush pipe, spreaders with
unions and clamps (all in C.P. brass)
with waste fitting as per IS : 2556,
11.2 C.I. trap with outlet grating and other 300.00 each 10897.60 3269280.00
couplings in C.P. brass, including
painting of fittings and cutting and
making good the walls and floors
wherever required :

Providing and fixing oval shape wash

basin with C.I. brackets, 15 mm C.P.
brass pillar taps, 32 mm C.P. brass
waste of standard pattern, including
11.3 painting of fittings and brackets,
cutting and making good the walls
wherever require:

White Vitreous China Wash basin

size 630x450 mm with a single 15
mm C.P. brass pillar cock swan neck
tap (Prayag cat no: 6814) or
11.3.1 260.00 Each 4888.51 1271012.60
equivalent.

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 301

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing P.V.C. waste

pipe for sink or wash basin including
11.4 P.V.C. waste fittings complete.

Flexible pipe
11.4.1

32 mm dia
11.4.1.1 260.00 Each 121.75 31655.00

Providing and Fixing Looking mirror

of with Decorative rigid PVC
moulded beadings of superior glass
(of approved quality) complete with 6
11.5 mm thick hard board ground fixed to 125.00 sqm 3265.01 408126.25
wooden cleats with C.P. brass screws
and washers complete

Providing and fixing PTMT Waste

Coupling for wash basin and sink, of
11.6 approved quality and colour.

Waste coupling 31 mm dia of 79 mm

length and 62 mm breadth weighing
11.6.1 not less than 45 gms. 260.00 Each 117.42 30529.20

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 302

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing PTMT liquid

soap container 109 mm wide, 125
mm high and 112 mm distance from
wall of standard shape with bracket of
11.7 the same materials with snap fittings 260.00 Each 171.45 44577.00
of approved quality and colour,
weighing not less than 105 gms.

Providing and fixing PTMT towel rail

complete with brackets fixed to
wooden cleats with CP brass screws
with concealed fittings arrangement
11.8 of approved quality and colour.

450 mm long towel rail with total

length of 495 mm, 78 mm wide and
11.8.1 effective height of 88 mm, weighing 210.00 Each 685.82 144022.20
not less than 170 gms.

Providing and fixing PTMT urinal

11.9 cock of approved quality and colour.

15 mm nominal bore, 80 mm long. 42

mm high and 30 mm wide with BSP
11.9.1 female threads weighing not less than 300.00 Each 178.63 53589.00
48 gms.

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 303

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing unplasticised

Rigid PVC SWR Single socketed
pipes & required fittings and specials
conforming to IS : 13592 Type B
(pressure of 6kg/sqcm) including
jointing with seal ring conforming to
IS : 5382 leaving 10 mm gap for
thermal expansion including
necessary fittings like plain bend
11.1 with/without access door
,single/double equal/unequal junction
of required degree with/withou access
door, terminal guard, heel rest bend
etc complete as per direction of
Engineer -in-Charge.

(Note: 1. All the joints shall be leak

proof .2. The centre line length of
pipes shall be measured for the
purpose of payment. 3.Floor trap
only shall be measured separately for
payment).

110 mm dia.
11.10.1 12864.00 metre 402.82 5181876.48

Providing and fixing unplasticised

Rigid PVC floor trap of self cleansing
design with screwed down or hinged
grating with or without vent arm
11.11 complete, including cost of cutting
and making good the walls and floors
:

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 304

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

100 mm inlet and 75 mm outlet

11.11.1 650.00 each 315.25 204912.50
Providing and fixing double
scaffolding system (cup lock type) on
the exterior side of building/structure,
including additional rows of
scaffolding in stepped manner as per
requirement of site, made with 40mm
dia M.S. tube, placed 1.5 metre centre
to centre, horizontal & vertical tubes
joint with cup & lock system with
M.S. Tubes, M.S. tube challis, M.S.
11.12 clamps and staircase system in the
scaffolding for working platform etc.
and maintaining it in a serviceable
condition for execution of work of
cleaning and/ or pointing and/ or
applying chemical and removing it
thereafter.

The scaffolding system shall be

stiffened with bracings, runners,
connecting with the building etc,
wherever required, if feasible, for
inspection of work at required
locations with essential safety
features for the workmen etc.,
11.12.1 1500.00 sqm 79.34 119010.00
complete as per directions and
approval of Engineer-in-charge.

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 305

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Sub-Head 12: WATER SUPPLY

Providing and fixing Chlorinated

Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot &
cold water supply, including all
CPVC plain & brass threaded fittings,
i/c fixing the pipe with clamps at 1.00
m spacing. This includes jointing of
pipes & fittings with one step CPVC
solvent cement and the cost of cutting
12.1 chases and making good the same
including testing of joints complete as
per direction of Engineer in Charge.
:Concealed work, including cutting
chases and making good the walls etc.

20 mm nominal outer dia .Pipes.

12.1.1 3000.00 metre 547.52 1642560.00
Providing and fixing Chlorinated
Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot &
cold water supply including all CPVC
plain & brass threaded fittings. This
includes jointing of pipes & fittings
12.2 with one step CPVC solvent cement,
trenching, refilling & testing of joints
complete as per direction of Engineer
in Charge : External work

75 mm nominal inner dia. Pipes.

12.2.1 150.00 metre 2206.30 330945.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 306

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing Chlorinated

Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot &
cold water supply, including all
CPVC plain & brass threaded fittings,
including fixing the pipe with clamps
at 1.00 m spacing. This includes
12.3 jointing of pipes & fittings with one
step CPVC solvent cement and
testing of joints complete as per
direction of Engineer in Charge. :
Internal work - Exposed on wall

25 mm nominal outer dia .Pipes.

12.3.1 160.00 metre 408.95 65432.00
32 mm nominal outer dia. Pipes.
12.3.2 160.00 metre 528.32 84531.20
40 mm nominal outer dia. Pipes.
12.3.3 160.00 metre 715.91 114545.60
50 mm nominal outer dia. Pipes.
12.3.4 600.00 metre 951.37 570822.00
Providing and fixing uplasticised
12.4 PVC connection pipe with brass
unions :

12.4.1 45 cm length

12.4.1.1 20 mm nominal bore 450.00 Each 121.25 54562.50

Providing and fixing C.P. brass
12.5 shower rose with 15 or 20 mm inlet :

150 mm diameter
12.5.1 180.00 Each 226.45 40761.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 307

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and placing on terrace (at

all floor levels) polyethylene water
storage tank, IS : 12701 marked, with
cover and suitable locking
12.6 arrangement and making necessary 40000.00 Ltr 11.20 448000.00
holes for inlet, outlet and overflow
pipes but without fittings and the base
support for tank.

Providing and fixing C.P. brass angle

valve for basin mixer and geyser
points of approved quality
12.7 conforming to IS:8931 :

15mm nominal bore

12.7.1 620.00 Each 584.89 362631.80
Providing and fixing PTMT grating
12.8 of approved quality and colour.

Rectangular type with openable

12.8.1 circular lid.

150 mm nominal size square 100 mm

diameter of the inner hinged round
12.8.1.1 grating. 550.00 Each 200.58 110319.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 308

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing hand shower

(Health faucet) with 1.2mtr long Easy
Flex Tube in chrome finish and wall
hook. ( MAKE-1: JAQUAR,
MODEL Each HEALTH FAUCET :
12.9 ALD-CHR-593N. MAKE-2: ROCA, 180.00 Each 1071.13 192803.40
MODEL
Each HEALTH FAUCET :
RF9060A1.) or EQUIVALENT

Providing and fixing CP brass 2 way

Bib Cock with Flange . Prayag cat no:
12.10 PIS-12H or equivalent 180.00 Each 2140.60 385308.00

Providing and fixing C.P. brass stop

cock (concealed) of standard design
and of approved make conforming to
12.11
IS:8931.

12.11.1 15 mm nominal bore. 210.00 Each 682.81 143390.10

Providing and fixing C.P. brass bib
cock of approved quality conforming
12.12 to IS:8931 :

12.12.1 15 mm nominal bore 400.00 Each 516.15 206460.00

Sub-Head 13 : DRAINAGE

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 309

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and fixing square-mouth

S.W. gully trap class SP-1 complete
with C.I. grating brick masonry
chamber with water tight C.I. cover
with frame of 300 x300 mm size
13.1 (inside) the weight of cover to be not
less than 4.50 kg and frame to be not
less than 2.70 kg as per standard
design:

100x100 mm size P type

13.1.1
With common burnt clay F.P.S. (non
13.1.1.1 modular ) bricks of class designation 40.00 Each 2757.58 110303.20
7.5
Providing and laying non-pressure
NP2 class (light duty) R.C.C. pipes
with collars jointed with stiff mixture
of cement mortar in the proportion of
13.2 1:2 (1 cement : 2 fine sand) including
testing of joints etc. complete :

150 mm dia. R.C.C. pipe

13.2.1 100.00 metre 566.71 56671.00

250 mm dia. R.C.C. pipe

13.2.2 100.00 metre 916.39 91639.00

300 mm dia. R.C.C. pipe

13.2.3 100.00 metre 1012.63 101263.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 310

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Constructing brick masonry manhole

in cement mortar 1:4 ( 1 cement : 4
coarse sand ) with R.C.C. top slab
with 1:1.5:3 mix (1 cement : 1.5
coarse sand (zone-III) : 3 graded
stone aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1
cement : 4 coarse sand (zone-III) : 8
graded stone aggregate 40 mm
nominal size), inside plastering 12
mm thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with
13.3
floating coat of neat cement and
making channels in cement concrete
1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm
nominal size) finished with a floating
coat of neat cement complete as per
standard design :

Inside size 90x80 cm and 45 cm deep

including C.I. cover with frame (light
duty) 455x610 mm internal
dimensions, total weight of cover and
13.3.1 frame to be not less than 38 kg
(weight of cover 23 kg and weight of
frame 15 kg) :

With common burnt clay F.P.S. (non

modular ) bricks of class designation
13.3.1.1 7.5 10.00 Each 13006.02 130060.20

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 311

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Inside size 120x90 cm and 90 cm

deep including C.I. cover with frame
(medium duty) 500 mm internal
diameter, total weight of cover and
13.3.2 frame to be not less than 1 16 kg
(weight of cover 58 kg and weight of
frame 58 kg) :

With common burnt clay F.P.S. (non

modular ) bricks of class designation
7.5
13.3.2.1 3.00 Each 26892.40 80677.20

13.4 Extra for depth for manholes

13.4.1 Size 90x80 cm
With common burnt clay F.P.S. (non
modular ) bricks of class designation
13.4.1.1 7.5 3.00 metre 8988.14 26964.42

Size 120x90 cm
13.4.2
With common burnt clay F.P.S. (non
13.4.2.1 modular ) bricks of class designation 1.00 metre 10780.68 10780.68
7.5
Sub-Head 14 : WATER PROOFING

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 312

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Providing and laying water proofing

treatment to the mother slab at sunken
floors at all levels. The operation
shall be carried out after scrapping
and properly cleaning the surface to
remove loose particles with wire
brushes and thoroughly washing with
water and allowing it to dry all
complete in all respects as per the
direction of Engineer in charge.

Any surface undulations, cracks and

14.1
crevices must be duly filled and
repaired with cement mortar 1:3 (1
cement : 3 fine sand) mixed with
latex polymers such as Dr. Fixit
pidicrate URD Fosroc SBR latex or
equivalent.

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 313

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

(i) First coat of brush bond Ultra flex

of Fosroc or Fast flex ultra of Dr.
Fixit or equivalent @ DFT 1mm
thick as per manufacturers
specifications. This coat to be air
cured for 6 to 8 hours.(ii) Second coat
of brush bond ultra flex of Fosroc or
Fast flex ultra of Dr. Fixit or
equivalent as per manufacturers
specifications. This coat is to be air
cured for 3 to 5 days. First coat and
second coat together should have
minimum DFT 1.50mm thick. (iii)
Third coat of bond coat with Dr. Fixit
spatter dash bond coat or SBR latex
of fosroc @ 3 liter per bag of cement
applied as per manufacture
specification or equivalent to get
good bonding with next layer or
equivalent. (iv) Fourth coat of 12mm
thick cement plaster in cement mortar
1:3 (1cement : 3 fine sand) with
floating coat of neat cement punning
both admixed with complast X421 IC
of Fosroc or Pidi proof 101 LW of
pidilite or equivalent.

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 314

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

The rate includes preparation of

surface by scarifying the surface of
the existing roof slab by manual or
Mechanical means, removal of loose
materials from surface using
compressed air and sealing of all
joints, corners, junctions of pipes and 3000.00 sqm 895.00 2685000.00
R.C.C. with polymer modified
cement, all complete as per direction
of Engineer in charge.

Sub-Head 15 : NEW TECHNOLOGIES AND MATERIALS

Providing and fixing factory made

single extruded WPC (Wood Polymer
Composite) solid door/ window/
Ceosetory windows & other Frames/
Chowkhat comprising of virgin PVC
polymer of K value 58-60
(Suspension Grade), calcium
carbonate and natural fibers (wood
powder/ rice husk/ wheat husk) and
15.1 non toxic additives (maximum
toxicity index of 12 for 100 gms)
fabricated with miter joints after
applying PVC solvent cement and
screwed with full body threaded star
headed SS screws having minimum
frame

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 315

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

(M.S hold fast/ lugs or SS dash

fasteners shall be paid for separately).
Note: For WPC solid door/ window
frames, minus 5mm tolerance in
dimensions i.e depth and width of
profile shall be acceptable.
Variationin profile dimensions on
plus side shall be acceptable but no
extra payment on this account shall be
made.

15.1.1 Frame size 50 x 100 mm 2300.00 metre 965.18 2219914.00

Providing and fixing factory made
single extruded WPC (Wood Polymer
Composite) solid plain flush door
shutter of required size comprising of
virgin polymer of K value 58-60
(Suspension Grade), calcium
carbonate and natural fibers (wood
powder/ rice husk/ wheat husk) and
non toxic additives (maximum
toxicity index of 12 for 100 gms)
15.2 having minimum density of 650
kg/cum and screw withdrawal
strength of 1800 N (Face) & 900 N
(Edge), minimum compressive
strength 50 N/mm2, modulus of
elasticity 850 N/mm2 and resistance
to spread of flame of

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 316

Rate Incl
Cost
Index
Item
Description of item Qty Unit @4.67%& Amount
No
GST
factor

Class A category with property of

being termite/borer proof, water/
moisture proof and fire retardant and
fixing with stainless steel butt hinges
of required size with necessary full
body threaded star headed counter
sunk S.S screws, all as per direction
of Engineer-In- Charge. (Note:
stainless steel butt hinges and
necessary S.S screws shall be paid
separately)

15.2.1 30 mm thick 1000.00 Sqm 4426.85 4426850.00

Total Amount 67107877.55
Say 67107878.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 317

Electrical Component
S. Description Total
No. Qty Rate Unit Amount
1 Wiring for light point/ fan point/
exhaust fan point/ call bell poin.t with
1.5 sq. mm FRLS PVC insulated
copper conductor single core cable in
surface I recessed medium class PVC
conduit, with modular switch, modular
plate, suitable Gl box and earthing the
point with 1.5 sq. mm FRLS PVC
insulated copper conductor single core
cable etc. as required.
1.1 Group A
1176 1097.00 Point 1290072.00
2 Supplying and fixing of following
sizes of medium class PVC conduit
along with accessories in
surface/recess including cutting the
wall and making good the same in case
of recessed conduit as required.
2.1 20mm
600 138.00 Metre 82800.00
2.2 25mm
400 157.00 Metre 62800.00
3 Supplying and drawing following sizes
of FRLS PVC insulated copper
conductor, single core cable in the
existing surface/ recessed steel/ PVC
conduit as required.
3.1 3 x 1.5 sq. mm 800 102.00 Metre 81600.00
3.2 3 x 4 sq. mm 200 223.00 Metre 44600.00
4 Supplying and fixing following
modular switch/ socket on the existing
modular plate & switch box including
connections but excluding modular
plate etc. as required.
4.1 15/16 amp switch (For Geyser) 42 168.00 Each 7056.00
4.2 6 pin 15/16 amp socket outlet (For
Geyser) 42 213.00 Each 8946.00
5 Supplying and fixing following size/
modules, GI box along with modular
base & cover plate for modular
switches in recess etc as required.
5.1 1 or 2 Module (75mmX75mm) 84 322.00 Each 27048.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 318

S. Description Total
No. Qty Rate Unit Amount
5 Supplying and fixing following size/
modules, GI box along with modular
base & cover plate for modular
switches in recess etc as required.

5.2 3 Module (100mmX75mm) (Washing

machine) 5 353.00 Each 1765.00
6 Supplying and fixing following
modular switch/ socket on the existing
modular plate & switch box including
connections but excluding modular
plate etc. as required.
6.1 15/16 amp switch (For Washing
machine) 5 168.00 Each 840.00
6.2 6 pin 15/16 amp socket outlet (For
Washing machine) 5 213.00 Each 1065.00
7 Supply, Installation, testing and
commissioning of surface mounted
batten type LED (4 feet) luminaire
having body made of extruded
aluminium/CRCA including LED lamp
with lumens not less than 1900 lumens
and wattage not more than 20 Watts,
colour temperature not less than
5700K, non-yellowing diffuser,
complete with LED module, driver
unit, built in 2KV surge protector duly
wired, directly on ceiling/ wall
including connections with 1.5 sq. mm
FRLS, PVC insulated, copper
conductor, single core cable and
earthing etc., as required. 336 968.00 Each 325248.00
8 Supply, installation, testing and
commissioning of following sweep ISI
marked metallic exhaust fan with self
mounting grill without regulator,
suitable for operation at 230 V single
phase 50 Hz, AC supply, in the
existing opening including making
good the damages, connections, etc. as
required.
8.1 225 mm sweep 378 2223.00 Each 840294.00
8.2 300 mm sweep 84 2343.00 Each 196812.00
9 Supplying and fixing Suitable angle
Holder with 9 W LED lamp i/c
connection testing and commissioning
complete etc. as required. 378 216.00 Each 81648.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 319

S. Description Total
No. Qty Rate Unit Amount
10 Dismantling of Following existing
fluorescent fitting, GI boxes/ PVC
boxes, and Exhaust Fans etc.
including shifting of dismantling
materials from site to Client
Department store and transportation,
loading, unloading etc. complete as
required. 1 30000.00 Job 30000.00
Total 3082594.00

Corrections/Omissions/Insertions – NIL AE EE
 PART ‘D’ – 320

Central Public Works Department

Uploaded NIT No: 0 6 /EE&SM(C)-II/CPWD/WARANGAL/ 2024-2025

Name of Work: Providing repairs to existing plumbing, drainage, tile flooring, doors
and ducts including internal electrical installations etc in Kakatiya Hall of Residence
(1.0K) at NIT Warangal-Reg. Complete Renovation of toilet, bathrooms, shafts and
approximately 60 damaged Hostel Rooms.

ABSTRACT OF COST
Name of the Contractor
Percentage % in Total
above or Figures Cost
S.No. Name of Component Estimated Cost
below the
estimated cost
1 Composite Tender Rs. 7,01,90,472/-
Civil Rs.. 67107878.00
Electrical
Rs.3082594.00

GRAND TOTAL Rs. 7,01,90,472/-

Important Note:
1. The estimated cost of tender has been worked out by taking into consideration the
cost index of Warangal for DSR 2023 items, DSR 2022 (E&M Works) and market rates
for NSR items. The Delhi Schedule of Rate 2023 items rates, and GST @ 18% for
construction works as per the latest guidelines of G.O.I., therefore are adjusted
accordingly.

2. The tenderer is to quote a single consolidated percentage only at par/above/below

estimated cost to cover all the rates of all the items under the schedule of composite
tender.

3. If the percentage quoted is not clear, or if the rate is not quoted in percentage, the
tender shall be treated as invalid and will not be entertained as lowest tenderer.

Corrections/Omissions/Insertions – NIL AE EE