Part - C 160

PART -C
Schedule of Quantities

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 161

INDEX

Code Content Page No.

1 PART- C 160-184

2 INDEX 161

3 Schedule of Quantities 162– 183

4 Abstract of Cost 184

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 162

SCHEDULE OF QUANTITIES

Name of Work: Special Repair works to School building for PM Shri Kendriya Vidyalaya, Vizianagaram,
Andhra Pradesh.

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Earth work in excavation by
mechanical means (Hydraulic
excavator)/ manual means over areas
(exceeding 30 cm in depth, 1.5 m in
1 width as well as 10 sqm on plan)
including getting out and disposal of
excavated earth for all leads and lifts
within the campus, as directed by
Engineer-in-charge.
1.1 All kinds of soil 611.00 cum 188.25 115021.00
Filling available excavated earth
(excluding rock) in trenches, plinth,
sides of foundations etc. in layers not
2 exceeding 20cm in depth, 133.00 cum 207.87 27647.00
consolidating each deposited layer by
ramming and watering, for all leads
and lifts within the campus
Supplying and filling in plinth with
river sand under floors, including
3 11.00 cum 2252.39 24776.00
watering, ramming, consolidating and
dressing complete.
Providing and laying in position
cement concrete of specified grade
4 excluding the cost of centering and
shuttering - All work up to plinth level
:
Note: If the agency wants to procure
the concrete from the RMC plant, they
can procure with prior approval of the
design mix and RMC plant from the
Engineer in charge. No additional
clams will be admissible in this
regards.
1:5:10 (1 Portland Pozzolana cement :
4.1 5 coarse sand (zone-III): 10 graded 25.00 cum 6913.43 172836.00
stone aggregate 40 mm nominal size)

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 163

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Providing and laying cement concrete
in retaining walls, return walls, walls
(any thickness) including attached
pilasters, columns, piers, abutments,
pillars, posts, struts, buttresses, string
5 or lacing courses, parapets, coping,
bed blocks, anchor blocks, plain
window sills, fillets, sunken floor etc.,
up to floor five level, excluding the
cost of centering, shuttering and
finishing:
Note: If the agency wants to procure
the concrete from the RMC plant, they
can procure with prior approval of the
design mix and RMC plant from the
Engineer in charge. No additional
clams will be admissible in this
regards.

1:2:4 (1 Portland Pozzolana Cement :

2 coarse sand (zone-III) derived from
5.1 natural sources : 4 graded stone 10.00 cum 10494.55 104946.00
aggregate 20 mm nominal size derived
from natural sources)

1:5:10 (1 Portland Pozzolana cement :

5 coarse sand (zone-III) derived from
5.2 natural sources : 10 graded Brick 30.00 cum 6184.64 185539.00
agrregate 40 mm nominal size)-For
Sunken floor filling
Reinforced cement concrete work in
beams, suspended floors, roofs having
slope up to 15° landings, balconies,
shelves, chajjas, lintels, bands, plain
window sills, staircases and spiral stair
cases above plinth level up to floor
6 five level, excluding the cost of 2.50 Cum 12202.49 30506.00
centering, shuttering, finishing and
reinforcement with 1:1.5:3 (1 cement :
1.5 coarse sand(zone-III) derived from
natural sources : 3 graded stone
aggregate 20 mm nominal size derived
from natural sources).
Centering and shuttering including
7 strutting, propping etc. and removal of
form for :

Foundations, footings, bases of

7.1 22.00 sqm 415.90 9150.00
columns, etc. for mass concrete

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 164

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Walls (any thickness) including
7.2 attached pilasters, butteresses, plinth 347.00 sqm 893.53 310055.00
and string courses etc.

Suspended floors, roofs, landings,

7.3 124.00 sqm 983.41 121943.00
balconies and access platform

Edges of slabs and breaks in floors and

7.4
walls
7.4.1 Under 20 cm wide 50.00 Meter 221.18 11059.00

Steel reinforcement for R.C.C. work

including straightening, cutting,
8
bending, placing in position and
binding all complete up to plinth level.

Thermo-Mechanically Treated bars of

8.1 7600.00 kg 114.38 869288.00
grade Fe-500D or more
Steel reinforcement for R.C.C. work
including straightening, cutting,
9 bending, placing in position and
binding all complete above plinth
level.
Thermo-Mechanically Treated bars of
9.1 200.00 kg 114.38 22876.00
grade Fe-500D or more.
Providing and laying in position ready
mixed or site batched design mix
cement concrete for reinforced cement
concrete work; using coarse aggregate
and fine aggregate derived from
natural sources, Portland Pozzolana /
Ordinary Portland /Portland Slag
cement, admixtures in recommended
proportions as per IS: 9103 to
10 accelerate / retard setting of concrete,
to improve durability and workability
without impairing strength; including
pumping of concrete to site of laying,
curing, carriage for all leads; but
excluding the cost of centering,
shuttering, finishing and reinforcement
as per direction of the engineer-in-
charge; for the following grades of
concrete.

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 165

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Note: Extra cement up to 10% of the
minimum specified cement content in
design mix shall be payable separately.
In case the cement content in design
mix is more than 110% of the
specified minimum cement content,
the contractor shall have discretion to
either re-design the mix or bear the
cost of extra cement
10.1 All work up to plinth level.

Concrete of M30 grade with minimum

10.1.1 101.00 cum 10240.55 1034296.00
cement content of 350 kg /cum
Half brick masonry with non modular
fly ash cement bricks of class
11 designation 7.5, conforming to IS
:12894, in super structure above plinth
and up to floor V level.

Cement mortar 1 : 4 (1 Portland

11.1 30.00 sqm 1172.78 35183.00
Pozzolana cement : 4 coarse sand)

Providing and fixing 18 mm thick

gang saw cut, mirror polished,
premoulded and prepolished, machine
cut for lab platforms, vanity counters,
window sills, facias and similar
locations of required size, approved
shade, colour and texture laid over 20
mm thick base cement mortar 1:4 (1
12 Portland Pozzolana cement : 4 coarse
sand), joints treated with white
cement, mixed with matching
pigment, epoxy touch ups, including
rubbing, curing, moulding and
polishing to all exposed edges to give
high gloss finish including making
hole in lab platform for gas cylinder
pipe etc. complete at all levels.
Granite stone slab colour black,
12.1
Cherry/Ruby red/ Tan brown

12.1.1 Area of slab to be measured 10.00 sqm 5447.41 54474.00

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 166

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Extra for providing opening of
required size & shape for wash basin/
kitchen sink in kitchen platform,
vanity counter and similar location in
13 30.00 each 1037.98 31139.00
marble/ Granite/ stone work, including
necessary holes for pillar taps etc.
including moulding, rubbing and
polishing of cut edges etc. complete.
Providing and fixing stone slab with
table rubbed, edges rounded and
polished on both sides and of size
75x50 cm deep and 1.8 cm thick,
fixed in urinal partitions by cutting a
chase of appropriate width with chase
14 cutter and embedding the stone in the
chase with epoxy grout or with cement
concrete 1:2:4 (1 Portland Pozzolana
cement: 2 coarse sand: 4 graded stone
aggregate 6 mm nominal size) as per
direction of Engineer-in-charge and
finished smooth.
14.1 Granite Stone of approved shade 11.00 sqm 4297.27 47270.00

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 167

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Providing and fixing factory made
single extruded WPC (Wood Polymer
Composite)solid door/ Window
/Clerestory windows & other Frames
/Chowkhat comprising of virgin PVC
polymer of K value 58-60 (Suspension
Grade), calcium carbonate and natural
fibers (wood powder/rice husk/wheat
husk)and non toxic additives
(maximum toxity index of 12 for 100
gms) fabricated with miter joints after
applying PVC solvent cement and
screwed with full body threaded star
headed SS screws having minimum
15 frame density of 750 Kg / Cum, Screw
withdrawal strength of 2200 N (Face)
and 1100 N (Edge), minimum
compressive strength of 58 N/mm2,
modulus of elasticity 900N/mm2 and
resistance to spread of flame of Class
A category with property of being
termite/borer proof, water/moisture
proof and fire retardant and fixed in
position with M.S. hold fast/lugs/SS
dash fasteners of required dia and
length complete as per direction of
Engineer-in-Charge. (M.S. hold
fast/lugs or SS dash fasteners shall be
paid for separately).
Note: For WPC solid door / window
frames, minus 5mm tolerance in
dimensions i.e. depth and width of
profile shall be acceptable. Variation
in profile dimensions on Plus side
shall be acceptable but no extra
payment on this account shall be
made:
15.1 Frame size 45 x 85 mm 225.00 metre 982.46 221054.00

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 168

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Providing and fixing factory made single
extruded WPC (Wood Polymer
Composite) solid plain flush door shutter
of required size comprising of virgin
polymer of K value 58-60 (Suspension
Grade), calcium carbonate and natural
fibers (wood powder/ rice husk/wheat
husk) and non toxic additives (maximum
toxicity index of 12 for 100 gms) having
minimum density of 650 kg/cum and
screw withdrawal strength of 1800 N
(Face) & 900 N (Edge), minimum
16
compressive strength 50 N/mm2, modulus
of elasticity 850 N/mm2 and resistance to
spread of flame of Class A category with
property of being termite/borer proof,
water/moisture proof and fire retardant
and fixing with stainless steel butt hinges
of required size with necessary full body
threaded star headed counter sunk S.S
screws, all as per direction of Engineer-In-
Charge. (Note: stainless steel butt hinges
and necessary S.S screws shall be paid
separately)
16.1 30 mm thick 72.00 sqm 4609.98 331919.00

Providing and fixing IS : 12817

marked stainless steel butt hinges
17
(Heavy weight) with stainless steel
screws etc. Complete

17.1 75x47x2.50 mm (for WPC door) 132.00 each 94.71 12502.00

Providing and fixing stainless steel (

grade 304 ) baby latch with SS lock
18 strip - 125mm (Code: BL(B) of Dorset 44.00 each 497.33 21882.00
make or equivalent) with necessary
screws etc. complete :

Providing and fixing bright /matt

finished Stainless Steel handles of
19
approved quality & make with
necessary screws etc. all complete

19.1 125 mm 88.00 each 126.42 11125.00

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 169

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Providing and fixing stainless steel
(grade 304) sliding door bolts ( Model:
20 SDH-TDH-25012 of Dorset make or 44.00 each 276.92 12185.00
equivalent) with necessary nuts and
screws etc. complete : 250x12 mm
Providing and fixing aluminium
extruded section body tubular type
universal hydraulic door closer
(having brand logo with ISI mark, IS :
3564, embossed on the body, door
21 10.00 each 1042.70 10427.00
weight up to 36 kg to 80 kg and door
width from 701 mm to 1000 mm),
with double speed adjustment with
necessary accessories and screws etc.
complete.

Providing and fixing factory made

uPVC glazed/wire mesh
windows/doors comprising of lead
free uPVC multi-chambered frame,
sash and mullion/coupler (where ever
required) extruded profiles having
minimum wall thickness of 1.70 mm
for series R1 and R2 profiles and 2.10
mm for series R3 and R4 profiles
conforming to EN: 12608 in any
shape, colour and design duly
reinforced with galvanized mild steel
22 section made of required shape & size
as per CPWD specification, uPVC
extruded glazing beads, interlocks and
inline sash adaptor (where ever
required) of appropriate dimension
EPDM gasket, hardware, SS304 grade
fasteners of minimum 8 mm dia x
75mm length with countersunk head,
comprising of matching polyamide
PA6 grade sleeve for fixing frame to
finished wall as per IS 1367 : part 1 to
14 plastic packers, plastic caps and
necessary stainless steel screws etc.

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 170

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Profile of frame, sash & mullion (if
required) shall be mitred cut and
fusion welded/mechanically jointed
duly sealed at all corners, including
drilling of holes for fixing hardware
and drainage of water etc. After fixing
frame the gap between frame and
adjacent finished wall shall be filled
with weather proof silicon sealant over
backer rod of approved size and
quality, all complete as per approved
drawings conforming to CPWD
specification & direction of Engineer-
in-charge. section of steel
reinforcement and cross section of
uPVC profiles to be as per design
approved by Engineer-in-charge. Wire
mesh/ glazing of plain/ toughened/
laminated/ double glass unit with
/without high performance coatings as
per design requirements and
conforming to IS: 3548 & IS: 16231
shall be paid separately.
Note: structural design proof checked
from a Government Engineering
institute, to be provided by the
manufacturer for :

i) Sites with basic wind speed > 45m/

sec as per IS 875 - Part3.
ii) Sites with structures height more
than 20 m for all wind speeds.

Fixed window/ ventilator with

22.1
mullion/ transom.
Using R1 series with frame (33mm &
above ) x (35mm & above) & mullion
22.1.1 45.00 sqm 9709.73 436938.00
(33mm & above) x (50mm & above).
(Height upto 0.90 metre)
Providing and fixing glazing in uPVC
door, window, ventilator shutters,
partitions, etc. including louvers with
23 EPDM rubber/neoprene gasket, etc.
complete as per the architectural
drawings and the directions of
Engineer-in-charge.

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 171

Rate i/c
Sl. No Description Quantity Unit Amount
CI
With frosted glass panes of 5.0 mm
23.1 thickness (weight not less than 10 kg 45.00 sqm 1783.51 80258.00
per sqm).
Providing and fixing carbon steel
galvanised ( minimum coating 5
micron) dash fastener of 10 mm dia
double threaded 6.8 grade (yield
strength 480 N/mm2), counter sunk
24
head, comprising of 10 mm dia
polyamide PA 6 grade sleeve,
including drilling of hole in frame ,
concrete/ masonry, etc. as per
direction of Engineer-in-charge.
24.1 10x120mm 350.00 each 181.30 63455.00
Providing and laying Anti-skid
ceramic floor tiles 400X400 mm or
more (thickness to be specified by the
manufacturer) of 1st quality
conforming to IS: 15622 of approved
make in all colours, shades, as
approved by Engineer-in-charge laid
25 150.00 sqm 1162.97 174446.00
on 20 mm thick Cement Mortar 1:4 (1
Portland Pozzolana Cement: 4 Coarse
sand) including pointing the joints
with white cement and matching
pigments, etc., complete. (For flooring
of Toilets & Wash area in Ground
Floor)
Providing and laying Anti skid
ceramic floor tiles of size 400X400
mm or more (thickness to be specified
by the manufacturer) of 1st quality
conforming to IS: 15622 of approved
make in colours, shades, as approved
by Engineer-in-charge laid on 20 mm
thick cement mortar 1:4 (1 Portland
Pozzolana Cement:4 Coarse sand),
including providing spacers of 3mm
26 wide and grouting the joints of 110.00 sqm 1544.83 169931.00
flooring tiles having joints of 3 mm
width, using matching colour epoxy
grout mix of 0.70 kg of organic coated
filler of desired shade of approved
make (0.10 kg of hardener and 0.20 kg
of resin per kg), including
filling/grouting and finishing complete
as per direction of Engineer-in-charge.
(For flooring of Toilets and wash area
in upper floors)
Cor NIL c Cor NIL Ins NIL
Omi NIL Ovw NIL

AE(P) EE
 Part - C 172

Rate i/c
Sl. No Description Quantity Unit Amount
CI

Providing and fixing Ist quality

rectified ceramic glazed wall tiles of
size 300 x 450mm or 300 x 600 mm
Digital Series with Decorative bands /
Highlighters at certain level
conforming to IS: 15622 (thickness to
be specified by the manufacturer), of
approved make, in all colours, shades
except burgundy, bottle green, black
of any size as approved by Engineer-
27 in-Charge, in skirting, risers of steps 610.00 sqm 1344.75 820298.00
and dados, over 12 mm thick bed of
cement mortar 1:3 (1 Portland
Pozzolana cement : 3 coarse sand) and
jointing with grey cement slurry @
3.3kg per sqm, including pointing in
white cement mixed with pigment of
matching shade complete. Kitchen
dado if any should have minimum
30% of concept tiles indicating
vegetable and fruits etc.

Providing and fixing PVC corner

beading of size 10mm and of matching
28 shade at the protruding corners of 200.00 metre 53.30 10660.00
ceramic wall dado complete all as
directed by the Engineer-in-charge
12 mm cement plaster of mix
including mixing of synthetic
polyester triangular fibre of length
6mm, effective diameter 10-40
microns and specific gravity 1.34 to
29
1.40 in cement plaster / mortar by
using 125 grams of synthetic polyester
triangular fibre for 50 kgs cement used
in cement mortar as per direction of
Engineer-in-charge.:
1:6 (1 Portland Pozzolana cement: 6
29.1 50.00 sqm 353.54 17677.00
fine sand)

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 173

Rate i/c
Sl. No Description Quantity Unit Amount
CI
15 mm cement plaster on the rough
side of single or half brick wall of mix
including mixing of synthetic
polyester triangular fibre of length
6mm, effective diameter 10-40
30 microns and specific gravity 1.34 to
1.40 in cement plaster / mortar by
using 125 grams of synthetic polyester
triangular fibre for 50 kgs cement used
in cement mortar as per direction of
Engineer-in-charge.:
1:6 (1 Portland Pozzolana cement: 6
30.1 50.00 sqm 406.20 20310.00
fine sand)
12 mm cement plaster finished with a
31
floating coat of neat cement :
1:4 (1 Portland Pozzolana cement : 4
31.1 150.00 sqm 451.33 67700.00
fine sand)
32 6 mm cement plaster of mix :
1:3 (1 Portland Pozzolana cement : 3
32.1 120.00 sqm 318.65 38238.00
fine sand)
Painting with synthetic enamel paint
33 of approved brand and manufacture to
give an even shade :
33.1 Two coats or more coats on new work 50.00 sqm 165.34 8267.00
Applying priming coats with primer of
approved brand and manufacture,
34
having low VOC (Volatile Organic
Compound ) content.

With water thinnable cement primer

34.1 on wall surface having VOC content 300.00 sqm 78.43 23529.00
less than 50 grams/litre
Wall painting with premium acrylic
emulsion paint of interior grade,
having VOC (Volatile Organic
Compound ) content less than 50
35
grams/ litre of approved brand and
manufacture, including applying
additional coats wherever required to
achieve even shade and colour.
35.1 Two or more coats on new work. 300.00 sqm 151.45 45435.00

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 174

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Demolishing R.C.C. work manually/
by mechanical means including
stacking of steel bars and disposal of
36 5.00 Cum 4105.32 20527.00
unserviceable material within 50
metres lead as per direction of
Engineer - in- charge.
Demolishing brick work manually/ by
mechanical means including stacking
of serviceable material and disposal of
37
unserviceable material within 50
metres lead as per direction of
Engineer-in-charge.
37.1 In cement mortar 10.00 Cum 2381.64 23816.00
Dismantling doors, windows and
clerestory windows (steel or wood)
38 shutter including chowkhats,
architrave, holdfasts etc. complete and
stacking within 50 metres lead :
38.1 Of area 3 sq. metres and below 137.00 Sqm 424.49 58155.00
Dismantling tile work in floors and
roofs laid in cement mortar including
39
stacking material within 50 metres
lead.
39.1 Channels, angles, tees and flats 875.00 Sqm 84.86 74253.00
Providing and fixing white vitreous
China Wall Hung WC With PP Soft
Close Seat Cover, Hinges of Size:
365x545x360 mm of model no. CNS-
WHT-961SPP of Jaquar or Equivalent
including C P Brass Flush Valve Dual
40 Flow 32mm Size (Concealed Body) 25.00 each 15907.65 397691.00
With Exposed Shut Off Provision &
100mm Square Plate of Jaquar -
Metropole series - FLV-1085NSQ or
equivalent , including Accessories Set
, nuts, rock bolts and gasket etc
complete.

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 175

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Providing and fixing water closet
squatting pan (Indian type W.C. pan)
of Parryware - C0117 or equivalent
with 110 mm unplasticized PVC -
SWR P or S trap, C P Brass Flush
Valve Dual Flow 32mm Size
(Concealed Body) With Exposed Shut
Off Provision & 100mm Square Plate
41 6.00 each 9900.80 59405.00
of Jaquar - Metropole series - FLV-
1085NSQ or equivalent) etc. , with all
fittings and fixtures complete,
including cutting and making good the
walls and floors wherever required: -
White Vitreous China Orissa pattern
W.C. pan of size 580x440 mm with
integral type foot rests
Providing and fixing the toilet unit for
physically challenged persons of model
Hindware - Differently abled series -
Matrix set - 70002 or equivalent approved
make 1 No. European Water Closet
(EWC) of size 66x35x88cm along with
dual flushing cistern, CP Brass Twoway
bib cock with CP Brass health faucet
including necessary fittings, 1 No.
Washbasin of size 46x36x18cm with CP
Brass Pillar cock, CP brass bottle trap
including necessary wall mounting
brackets and fittings, 1 No. Powder-coated
MS Hinge Rail 76 cm long and 4 No.
42 4.00 each 45663.42 182654.00
Powder-coated MS Grabrail of size 600
mm long to be fixed at the appropriate
location as decided by the Engineer in
Charge, C P Brass Soap dish holder, CP
Brass Towel ring, CP brass Toilet paper
holder including all fitting, accessories,
and fixtures, etc., complete as per
manufacturer's specification and
directions of the Engineer in charge.Note:
The PH Toilet shall be completed with all
required accessories as per NBC 2016 /
Harmonised Guidelines & Standards for
Universal Accessibility In India 2021 and
nothing extra shall be paid.

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 176

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Providing and fixing white vitreous
China flat back half stall urinal of size
340x325x650 mm of Jaquar make
URS-WHT-13253N with Urinal Valve
Auto Closing System with Built-in
Control Cock & Wall Flange of jaquar
make PRS-CHR-073 with fittings,
43 20.00 each 14671.12 293422.00
spreaders with unions and clamps (all
in C.P. brass) with waste fitting as per
IS : 2556, C.I. trap with outlet grating
and other couplings in C.P. brass,
including painting of fittings and
cutting and making good the walls and
floors wherever required :
Providing and fixing wash basin with
C.I. brackets, 15 mm C.P. brass pillar
taps, 32 mm C.P. brass waste of
standard pattern, including painting of
fittings and brackets, cutting and
making good the walls wherever
required:
Star White Vitreous China Under
44 30.00 each 7989.70 239691.00
counter Wash basin of size
605x410x200 mm as per model No.
FNS-WHT-40701 of Jaquar or it's
equivalent of rectangular shape with a
single C.P. Brass long neck Pillar cock
of approved make and colour as per
Model No: CON-021KN of Jaquar or
equivalent make.
Providing and fixing CP Brass 32mm
size Bottle Trap of approved quality &
45 30.00 each 1097.48 32924.00
make and as per the direction of
Engineer-in-charge.
Providing and fixing 6 mm thick
mirror of superior glass (of approved
quality) and of required shape and size
46
with rigid PVC decorative moulded
frame of approved make and shade
with 6 mm thick hard board backing :

46.1 Rectangular shape of required size 13.00 sqm 3288.55 42751.00

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 177

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Providing and fixing unplasticized
Rigid PVC SWR single socketed
pipes conforming to IS 13592 Type B
(pressure of 6 kg/sqcm) including
jointing with seal ring conforming to
IS : 5382 leaving 10mm gap for
thermal expansion and jointing with
approved solvent wherever required as
per the direction of the Engineer-in-
47
charge for soil, waste and vent pipes
including necessary fittings and
accessories complete.
(Note : 1. All the joints shall be leak
proof. 2. The centre line length of
pipes shall be measured for the
purpose of payment. 3. Floor trap and
terminal guard only shall be measured
separately for payment).
47.1 110 mm dia. 150.00 metre 735.51 110327.00
47.2 75 mm dia. 75.00 metre 557.73 41830.00
47.3 50 mm dia 50.00 metre 233.47 11674.00
Providing and fixing unplasticized
Rigid PVC floor trap of self cleansing
design with screwed down or hinged
48 grating with or without vent arm 50.00 each 205.06 10253.00
complete, including cost of cutting and
making good the walls and floors : 100
mm inlet and 100 mm outlet
Providing and fixing unplasticized
Rigid PVC fittings and specials
conforming to IS 13592 Type-B
(pressure of 6 kg/sqcm) including
jointing with seal ring conforming to
IS : 5382 leaving 10mm gap for
49 thermal expansion and jointing with
approved solvent wherever required as
per the direction of the Engineer-in-
charge for soil, waste and vent pipes. -
Providing and fixing unplasticized
PVC terminal guard: (Note : All the
joints shall be leak proof.).
49.1 110 mm 15.00 each 94.66 1420.00

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 178

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Providing and fixing 100mm wide
Bath Seal Tape (non-reinforced twin
sided self adhesive bituminous
membrane) of Dr.Fixit or equivalent
make at the joints of PVC SWR
50 sanitary pipes concealed in sunken
floors as per manufacturer's
specification and as directed by the
Engineer in charge. (Number of Joints
wrapped shall be enumerated for
payment)
For 110mm dia pipes and fittings /
50.1 75.00 each 152.61 11446.00
accessories
Providing and fixing GI clamps of
approved design for fixing vertical
stacks of Water supply, Sanitary and
51 Rainwater pipelines, with suitable 100.00 each 180.65 18065.00
screws, etc complete as per directions
of Engineer - in Charge:- For 110mm
dia pipes
Providing and fixing Chlorinated
Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold
water supply, including all CPVC
plain & brass threaded fittings
including fixing the pipe with clamps
52
at 1.00 m spacing. This includes
jointing of pipes & fittings with one
step CPVC solvent cement and testing
of joints complete as per direction of
Engineer-in-Charge. Internal work -
Exposed on wall
52.1 32mm nominal dia pipes 20.00 metre 550.17 11003.00
52.2 40 mm nominal dia pipes 40.00 metre 745.53 29821.00
52.3 50 mm nominal dia pipes 30.00 metre 990.73 29722.00

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 179

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Providing and fixing Chlorinated
Polyvinyl Chloride (CPVC) pipes,
having thermal stability for hot & cold
water supply, including all CPVC
plain & brass threaded fittings i/c
fixing the pipe with clamps at 1.00 m
spacing. This includes jointing of
53
pipes & fittings, with one step CPVC
solvent cement and the cost of cutting
chases and making good the same
including testing of joints complete as
per direction of Engineer-in-Charge.
Concealed work, including cutting
chases and making good the wall etc.
53.1 20 mm nominal dia pipes 50.00 metre 570.16 28508.00
53.2 25 mm nominal dia pipes 40.00 metre 665.24 26610.00
53.3 32 mm nominal dia pipes 110.00 metre 784.08 86249.00
Providing and fixing C.P. brass angle
valve for basin mixer and geyser
54
points of approved quality conforming
to IS:8931
54.1 15 mm nominal bore 36.00 each 609.09 21927.00
Providing and fixing Stainless steel
grating of approved quality and colour.
- Rectangular type with openable
55 50.00 each 208.88 10444.00
circular lid - 150 mm nominal size
square 100 mm diameter of the inner
hinged round grating
Providing and fixing unplasticized
P.V.C. connection pipe with PTMT
56
Nuts, collar and bush of approved
quality and colour.
15 mm nominal bore with 45 cm
56.1 36.00 each 129.28 4654.00
length
Providing and fixing C.P brass two
way bib cock with wall flange of Lyric
range of Jaguar Make Code No. LYR-
57 30.00 each 2137.82 64135.00
CHR-38041 or its equivalent as per
the direction of Engineer-in-charge. -
15 mm nominal bore

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 180

Rate i/c
Sl. No Description Quantity Unit Amount
CI

Providing and fixing C.P brass

Health faucet ALD-CHR-565, CP
brass Hand Shower Hand Shower
58 (Health Faucet) with 1.0 Meter Long 30.00 each 1211.47 36344.00
easy flex tube in chrome finish & Wall
Hook of jaquar make complete as per
the direction of Engineer-in-charge.

Providing and fixing CP Brass liquid

soap dispenser & wall flange of
59 Model: ACN-CHR-1135N of Jaquar 34.00 each 1448.44 49247.00
or equivalent make and as per the
direction of Engineer-in-charge.
Providing and fixing Toilet paper roll
holder with flap of JAQUAR make or
60 6.00 each 824.90 4949.00
equivalent as per direction of Engineer
in charge.
Providing and fixing Double coat
hook Code: ACN-CHR-1161N
61 30.00 each 628.26 18848.00
jaquar make complete as per the
direction of Engineer-in-charge.
Providing and fixing CP Brass towel
ring of 178mm outer dia and 55mm
distance from wall surface & wall
62 flange of Model: ACN-CHR-1121BN 30.00 each 1072.36 32171.00
of Jaquar or equivalent make and as
per the direction of Engineer-in-
charge.
Providing and fixing square-mouth
S.W. gully trap class SP-1 complete
with C.I. grating brick masonry
chamber with water tight C.I. cover
63 with frame of 300 x300 mm size
(inside) the weight of over to be not
less than 4.50 kg and frame to be not
less than 2.70 kg as per standard
design
63.1 150 x 100 mm size P type
With common burnt clay F.P.S. (non
63.1.1 modular) bricks of class designation 10.00 each 2899.81 28998.00
5.0
Providing and laying non-pressure
NP2 class (light duty) R.C.C. pipes
with collars jointed with stiff mixture
64
of cement mortar in the proportion of
1:2 (1 cement : 2 fine sand) including
testing of joints etc. complete :

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 181

Rate i/c
Sl. No Description Quantity Unit Amount
CI
64.1 150 mm dia. R.C.C. pipe 20.00 metre 590.15 11803.00
64.2 250 mm dia. R.C.C. pipe 165.00 metre 954.30 157460.00
Constructing brick masonry manhole
in cement mortar 1:4 ( 1 cement : 4
coarse sand ) with R.C.C. top slab
with 1:1.5:3 mix (1 cement : 1.5
coarse sand (zone-III) : 3 graded stone
aggregate 20 mm nominal size),
foundation concrete 1:4:8 mix (1
cement : 4 coarse sand (zone-III) : 8
graded stone aggregate 40 mm
nominal size), inside plastering 12 mm
65 thick with cement mortar 1:3 (1
cement : 3 coarse sand) finished with
floating coat of neat cement and
making channels in cement concrete
1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm
nominal size) finished with a floating
coat of neat cement and external
plastering 15mm thick with cement
mortar (1 cement : 3 coarse sand)
complete as per standard design
Inside size 90x80 cm and 45 cm deep
including precast RCC manhole cover
65.1
with frame L.D.-2.5, rectangular shape
600X450 mm internal dimensions
With common burnt clay F.P.S. (non
65.1.1 modular) bricks of class designation 10.00 each 12341.53 123415.00
5.0
66 Extra for depth for manholes
66.1 Size 90x80 cm
With common burnt clay F.P.S. (non
66.1.1 modular) bricks of class designation 5.00 metre 9359.95 46800.00
5.0

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 182

Rate i/c
Sl. No Description Quantity Unit Amount
CI

Providing orange colour safety foot

rest of minimum 6 mm thick plastic
encapsulated as per IS : 10910, on 12
mm dia steel bar conforming to IS:
1786, having minimum cross section
as 23 mmx25 mm and over all
minimum length 263 mm and width as
165 mm with minimum 112 mm space
between protruded legs having 2 mm
tread on top surface by ribbing or
chequering besides necessary and
67 adequate anchoring projections on tail 20.00 each 587.24 11745.00
length on 138 mm as per standard
drawing and suitable to with stand the
bend test and chemical resistance test
as per specifications and having
manufacture's permanent identification
mark to be visible even after fixing,
including fixing in manholes with
30x20x15 cm cement concrete block
1:3:6 (1 cement : 3 coarse sand : 6
graded stone aggregate 20 mm
nominal size) complete as per design.

Providing and fixing in position SFRC

Cover and frame conforming to I.S.
68
12592 to of required shape and
approved quality
68.1 L D- 2.5
Rectangular shape 600x450 mm
68.1.1 2.00 each 1524.73 3049.00
internal dimensions

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 183

Rate i/c
Sl. No Description Quantity Unit Amount
CI
Providing and laying water proofing
treatment to sunken floors and inner
surfaces of over head water tank, sump
tank etc by applying :
(i) First coat of Brush bond RFX @
DFT 1mm thick of M/S Fosroc
chemicals or equivalent as per
manufacture's specification. This coat
is to be air curved for 6 hours.
69 (ii) Second coat of brush bond RFX @ 150.00 sqm 1211.23 181685.00
DFT 1mm thick of Forsoc chemicals
or equivalent as per manufacture's
specification. This coat is to be air
cured for 6 hours.
(iii)Third coat of bond coat with
cement slurry mixed with SBR latex
@ 3 litres per bag of cement applied as
per manufactures specification to get
good bonding with next layer.
(iv) Fourth coat of 12mm thick cement
plaster in cement mortar 1:3 (1
Portland Pozzolana cement : 3 fine
sand) with floating coat of neat cement
punning both admixed with conplast
WL of Fosroc of Pidi proof 101 LW of
pidilite or equivalent applied before
the air curing of third layer. The rate
includes preparation of surface
treatment, removal of dust from
surface using compressed air and
sealing of all joints, corners, junctions
of pipes and RCC with polymer mixed
slurry etc. all complete as per direction
of Engineer in charge.
Total 8456131.00

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE
 Part - C 184

Central Public Works Department

NIT. No. 39/2024-25/EE/Visakhapatnam

Name of w Work : Special Repair works to School building for PM Shri Kendriya Vidyalaya,
Vizianagaram, Andhra Pradesh.

ABSTRACT OF COST
Name of the Contractor

Percentage % in Total
above or Figures Cost
S.No. Name of Component Estimated Cost
below the
estimated cost
1 Civil Component Rs.84,56,131/-

GRAND TOTAL Rs.84,56,131/-

Important Note:
1. The estimated cost of tender has been worked out by taking into consideration the
cost index of Vizianagaram for DSR 2023 (Civil) items and market rates for NSR
items; therefore are adjusted accordingly.
2. The tenderer is to quote a single consolidated percentage only at
par/above/below estimated cost to cover all the rates of all the items under the
schedule of composite tender.
3. If the percentage quoted is not clear, or if the rate is not quoted in percentage, the
tender shall be treated as invalid and will not be considered as lowest tenderer.

Contractor Executive Engineer

Central PWD, Visakhapatnam.

Cor NIL c Cor NIL Ins NIL

Omi NIL Ovw NIL

AE(P) EE