Approval

TO : IT Solution
DATE : Sep. 27, 2011.

.tw
SAMSUNG TFT-LCD

MODEL NO. : LTN156KT06-801

om
d.c
NOTE : Extension code [ -8** ]
→ LTN156KT06-8**
slc
Surface type [ Anti-Glare ]
w.y

The information described in this SPEC is preliminary and can be changed without prior notice.
ww

APPROVED BY :

PREPARED BY :
Khan Kim

Application
pp Engineer
g Group
p
SAMSUNG ELECTRONICS CO., LTD.
Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 1 / 32

 CONTENTS Approval

Revision History -------------------( 3 )

General Description
p -------------------( 4 )

1. Absolute Maximum Ratings -------------------( 5 )

1.1 Absolute Ratings of environment
1.2 Electrical Absolute Ratings

.tw
2. Optical Characteristics -------------------( 7 )

3 Electrical Characteristics
3. - - - - - - - - - - - - - - - - - - - ( 10 )
3.1 TFT LCD Module
3.2 Backlight Unit
3.3 LED Driver

om
4. Block Diagram - - - - - - - - - - - - - - - - - - - ( 13 )
4.1 TFT LCD Module

5. Input Terminal Pin Assignment - - - - - - - - - - - - - - - - - - - ( 14 )

5.1 Input Signal & Power & Pin assignment
5.2 LVDS Interface
d.c
5.3 Timing Diagrams of LVDS For Transmitting
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color.
5.5 Pixel format

6. Interface Timing - - - - - - - - - - - - - - - - - - - ( 21 )
slc
6.1 Timing Parameters
6.2 Timing Diagrams of interface Signal
6.3 Power ON/OFF Sequence

7. Outline Dimension - - - - - - - - - - - - - - - - - - - ( 23 )
w.y

8. Packing -- - - - - - - - - - - - - - - - - -- ( 24 )

9. Marking & Others -- - - - - - - - - - - - - - - - - -- ( 25 )

10. General Precaution -- - - - - - - - - - - - - - - - - - -( 27 )

-- - - - - - - - - - - - - - - - - - -( 31 )
ww

11. EDID

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 2 / 32

 Approval
SPEC REVISION HISTORY

Date Revision No. Page Summary

July. 4, 2011 P00 All The preliminary specification of LTN156KT06-8 was issued first.

Aug. 10, 2011 A00 All The approval specification was issued first.

.tw
Aug. 25, 2011 A01 P7 Average Luminance of White was changed. Min 255 → 250 cd/m2

om
d.c
slc
CODE REVISION HISTORY
w.y

Date Model. Revision No. Summary MP or EOL

July. 4, 2011 LTN156KT06 801 Basic model From August, 2011 ~

ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 3 / 32

 Approval
GENERAL DESCRIPTION
DESCRIPTION
LTN156KT06 is a color active matrix TFT (Thin Film Transistor) liquid crystal display
(LCD) that uses amorphous silicon TFT as switching devices. This model is composed of a
TFT LCD panel, a driver circuit and a backlight unit. The resolution of a 15.6" contains
1600X900pixels and can display up to 16.2M colors. 6 O'clock direction is the optimum
viewing angle.

.tw
FEATURES
• High contrast ratio
• HD+ (1600 x 900 pixels ) resolution
• Fast Response
• LED Back Light with embedded LED Driver

om
• DE (Data enable) only mode
• 3.3V LVDS Interface
• Onboard EEDID chip
• Green
G product
d t (RoHS
(R HS compliant)
li t)
• APS function
• 6bit-FRC
d.c
APPLICATIONS
• Notebook PC
• If the usage of this product is not for PC application
application, but for others
others, please contact SEC
slc
GENERAL INFORMATION

Item Specification Unit Note

w.y

Display area 344 16H) x 193

344.16H) 193.59(V)
59(V) ( 15
15.6
6” diagonal ) mm

Driver element a-Si TFT active matrix

Display colors 16.2M

Number of pixel 1600 x 900 pixel

ww

Pixel arrangement RGB vertical stripe

Pixel pitch 0.2151(H) x 0.2151(V) (TYP.) mm

Display Mode Normally white

Surface treatment Haze 25%, Hard-Coating 3H Anti-glare

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 4 / 32

 Approval
Mechanical Information
Item Min. Typ. Max. Unit Note
Horizontal (H) 359.0 359.3 359.6 mm

Module 209.15 209.45 209.75 mm Module ~ Module

Vertical (V)
size 222.15 222.45 222.75 mm Outsize with Frange
Depth (D) - - 4 mm (1) Body area

.tw
Weight - - 435 g

Note (1) Measurement condition of outline dimension

. Equipment : Bernier Calipers
. Push Force : 750 ± 250 g f

om
1. ABSOLUTE MAXIMUM RATINGS
1.1 ENVIRONMENTAL ABSOLUTE RATINGS
Item Symbol Min. Max. Unit Note
Storage temperate TSTG -20 60 C (1)
Operating temperate
C
(Temperature of glass surface)
d.c TOPR 0 50 (1)

Shock ( non-operating ) Snop - 240 G (2),(4)

Vibration (non-operating) Vnop - 2.41 G (3),(4)

Note (1) Temperature and relative humidity range are shown in the figure below.
95 % RH Max. (40 C  Ta)
slc
Maximum wet - bulb temperature at 39 OC or less. (Ta  40 C ) No condensation

Relative Humidity ( %RH)

100 90
( 40,90 )
w.y

80

60
Operating Range ( 50,50.4)
40
( 60,27.7)
20
ww

Storage Range
5
0
-40 -20 0 20 40 60 80
Temperature (OC)

(2) 2ms, half sine wave, one time for X, Y,  Z.
(3) 5 - 500 Hz, random vibration, 30min for X, Y, Z.
(4) At testing
t ti VibVibration
ti andd Sh
Shock,
k th
the fi
fixture
t iin h
holding
ldi the
th Module
M d l to
t be
b ttested
t d have
h tto b
be
hard and rigid enough so that the Module would not be twisted or bent by the fixture.

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 5 / 32

 Approval
1.2 ELECTRICAL ABSOLUTE RATINGS

(1) TFT LCD MODULE

VDD =3.3V, VSS = GND = 0V

Item Symbol Min. Max. Unit Note

Power Supply Voltage VDD VDD - 0.3 VDD + 0.3 V (1)

.tw
Logic Input Voltage VIN VDD - 0.3 VDD + 0.3 V (1)

Note (1) Within Ta (25  2 C )

om
(2) BACK-LIGHT UNIT
Ta = 25  2 C , Duty = 100%

Item Symbol Min. Typ. Max. Unit Note

LED Current IL - 27 - mA (1)

d.c
LED Voltage FL 3.0 3.2 3.4 V (1)

Note (1) Permanent damage to the device may occur if maximum values are exceeded
Functional operation should be restricted to the conditions described under normal operating conditions.
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 6 / 32

 Approval
2. OPTICAL CHARACTERISTICS

The following items are measured under stable conditions. The optical characteristics
should
h ld b be measuredd iin a d
dark
k room or equivalent
i l t state
t t with
ith th
the methods
th d shown
h iin N
Note
t (5)
(5).
Measuring equipment : TOPCON SR-3

* Ta = 25  2 C, VDD=3.3V, fv= 60Hz, fDCLK = 50.2MHz, IF = 27mA

.tw
Item Symbol Condition Min. Typ. Max Unit Note

Contrast Ratio
CR 300 - - - (1), (2), (5)
(5 Points)

om
Response Time at Ta
TRT - 16 25 msec (1), (3)
( Rising + Falling )

Average Luminance IF=27mA

YL,AVE 250 300 - cd/m2
of White (5 Points) (1), (4)
d.c Normal
RX Viewing 0.577
Red Angle
RY =0 0.354
=0
GX 0.349
slc
Green
Color GY 0.565 (1), (5)
TYP TYP
Chromaticity - SR-3
BX -0.03 0.162 +0.03
( CIE )
Blue
BY 0.120
w.y

WX 0.313
White
WY 0.329

L - 45 -
Hor.
ww

R - 45 -
Viewing CR  10 (1), (5)
(1)
Degrees
Angle At center SR-3
H - 15 -
Ver.
L - 30 -

13 Points
L - - 1.7 - (6)
White Variation

Color Gamut CG - 45 - %

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 7 / 32

 Approval
Note 1) Definition of Viewing Angle : Viewing angle range(10  C/R)

Normal Line
 = 0o ,  = 0o
L
R
L H 12 O’clock
 L =90o x y direction
 H = 90o

.tw
6 O’clock y' x'
direction
R =90o
 L= 90o

om
Note 2) Definition of Contrast Ratio (CR) : Ratio of gray max (Gmax) ,gray min (Gmin)
at 5 points(4, 5, 7, 9, 10)

CR(4) + CR(5) + CR(7) + CR(9) + CR(10)

CR =
5
d.c
Points : 4 , 5 , 7 , 9 , 10 at the figure of Note (6).

Note 3) Definition of Response time :

slc
Display data White(TFT OFF) Black(TFT ON) White(TFT OFF)

TR TF
100%
90%
w.y

Optical
Response
10%
0%
Time
Note 4) Definition of Average Luminance of White : measure the luminance of white at 5 points.
ww

25% 50% 75%

VIEW AREA
Average Luminance of White ( YL,AVE ) 10 9 25%
YL4 + YL5 + YL7 + YL9 + YL10 7 50%
YL,AVE =
5 5 4 75%
(lines))
(li

: test point
Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 8 / 32

 Approval
Note 5) After stabilizing and leaving the panel alone at a given temperature for 30 min , the measurement
should be executed. Measurement should be executed in a stable, windless,and dark room.
30 min after lighting the backlight. This should be measured in the center of screen.
IF current : 27 mA
Environment condition : Ta = 25  2 C

Photo-detector
( TOPCON SR-3 )

.tw
om
Field = 2
50 cm

TFT-LCD module LCD panel

d.c
Center of the screen
[ Optical characteristics measurement setup ]
slc
Note 6) Definition of 13 points white variation ( L ), CR variation( CVER ) [ 1 ~ 13 ]
Maximum luminance of 13 points
L =
w.y

Minimum luminance of 13 points

10mm 10mm
25% 50% 75%
10mm
13 12 11
ww

10 9 25%

8 7 6 50% : test point

5 4 75%

3 2 1
10mm

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 9 / 32

 Approval
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE Ta= 25  2C

Item Symbol Min. Typ. Max. Unit Note

Voltage of Power Supply VDD 3.0 3.3 3.6 V

Differential Input High VIH - - +100 mV VCM = +1.2V

Voltage for LVDS
Low VIL -100 - - mV

.tw
Receiver Threshold

Vsync Frequency fv - 60 - Hz

Main Frequency fDCLK - 50.2 - MHz 2CH

White - 330 - mA (2),(3)*a

om
Current of Power
Mosaic IDD - 330 - mA (2),(3)*b
Supply

V.Stripe - 550 - mA (2),(3)*c

Note (1) Display data pins and timing signal pins should be connected.( GND = 0V )
d.c
(2) fV = 60Hz, fDCLK = 50.2MHZ, VDD = 3.3V , DC Current.
(3) Power dissipation pattern

*a)) White Pattern *b) Mosaic Pattern

slc
Display Brightest Gray Level

Display Darkest Gray Level

w.y

*c) V.Stripe
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 10 / 32

 4) Rush current measurement condition Approval

3.3V M1
2SK1059
VDD ( LCD INPUT)
FUSE
R1 C1
47K 1uF

R2
CONTROL SIGNAL M2
(HIGH to LOW)

.tw
1K 2SK1399

12V
R3 C2

C3 47K
10000pF
1uF

VDD rising time is 470us

0.9VDD

om 3.3V
d.c
0.1VDD
GND
470us
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 11 / 32

 Approval
3.2 BACK-LIGHT UNIT
Ta= 25  2 C
Item Symbol Min. Typ. Max. Unit Note
LED Forward Current IF - 27 - mA
LED Forward Voltage VF 3.0 3.2 3.4 V
LED Array Voltage VP 30 32 34 V VF X 10 LEDs
LED Counts - 40 - EA

.tw
Operating Life Time Hr 10,000 - - Hour (1)

Note (1) Life time (Hr) of LEDs can be defined as the time in which it continues to operate under the
condition Ta= 25  2 C and IF = 27mA until one of the following event occurs.
1. When the brightness becomes 50% or lower than the original.

3.3 LED Driver

om
d.c
- On board LED Driver (Manufacturer : Richtek) Ta= 25  2 C

Item Symbol Min. Typ. Max. Unit Note

Input Voltage Vin 6 12 21 V
slc
Input Current I - 360 - mA

BL power - 0.9 1.05 W @ 60nit

Pin
consumption - 4.3 5.2 W @ Max

ON 2.0 3.3 5.0 V

w.y

EN Control
C t lL Levell
OFF 0 0 0.5 V

ON 2.0 3.3 5.0 V

PWM Control Level
OFF 0 0 0.5 V

External PWM Vin=6~21V,

ww

Dimming Control FBLIM 0.2 - 10 kHz BLIM=PWM

Frequency (BLIM) 0V~3.3V
PWM Freq. :
5 - 100 %
200Hz~10KHz
PWM duty ratio D
PWM Freq. :
10 - 100 %
1KHz~10KHz

Note - Test Equipment : Fluke 45

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 12 / 32

 Approval
4. BLOCK DIAGRAM
4.1 TFT LCD Module

I2 C b
bus EDID
EEPROM
LVDS
Ai-Pi+
Input-Connector
LVDS Input/Aipi+Output
I-PEX 20455-040E-0 Timing Controller

.tw
or Compatible
Source
Driver
IC 15 6”HD
15.6”HD+
TFT-LCD Panel
DC-DC Gamma
Converter

om
Generator
LED Power
Control

VCOM
Generator
LED B/L
d.c SOURCE PCB

Video Signal
Control Signal
VCOM
LED Power&signal
slc
DVDD
AVDD
Von/Voff
Gamma
Feedback
w.y

4.2 LED connection and placement

D1 D2 D3 D4 D5 D6 D7 D8 D9 D10
Anode
ww

Cathode

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 13 / 32

 Approval
5. INPUT TERMINAL PIN ASSIGNMENT

5.1. Input Signal & Power (LVDS, Connector IPEX 20455 's or Compatible)

No
No. Symbol Function Polarity Remarks
1 VCC Power Supply 3.3V (typical)
2 VCC Power Supply 3.3V (typical)
3 VCC_EDID VCC_EDID

.tw
4 WPN No Connection
5 CLK CLK EDID
CLK_EDID
6 DATA DATA_EDID
7 Odd RIN0- - LVDS differential data input (G0, R0-R5) Negative

om
8 Odd RIN0+ + LVDS differential data input (G0, R0-R5) Positive
9 Odd RIN1- - LVDS differential data input (B0-B1, G1-G5) Negative
10 Odd RIN1+
RIN1 + LVDS differential data input (B0-B1,
(B0 B1, G1
G1-G5)
G5) Positive
11 GND Ground
12 Odd RIN2- - LVDS differential data input (B2-B5, DE, VS, HS) Negative
d.c
13 Odd RIN2+ + LVDS differential data input (B2-B5, DE, VS, HS) Positive
14 GND Ground
15 Odd CLK- - LVDS differential clock input
p ((Odd Clock)) Negative
g
16 Odd CLK+ + LVDS differential clock input (Odd Clock) Positive
slc
17 GND Ground
18 Odd RIN3- - LVDS differential data input (R6-R7, G6-G7, B6-B7) Negative
19 Odd RIN3+ + LVDS differential data input (R6-R7, G6-G7, B6-B7) Positive
w.y

20
0 GND
G Ground
G ou d
21 Even RIN0- - LVDS differential data input (G0, R0-R5) Negative
22 Even RIN0+ + LVDS differential data input (G0, R0-R5) Positive
23 Even RIN1- - LVDS differential data input (B0-B1, G1-G5) Negative
24 Even RIN1+ + LVDS differential data input (B0-B1, G1-G5) Positive
ww

25 GND Ground
26 Even RIN2- - LVDS differential data input (B2-B5, DE, VS, HS) Negative
27 Even RIN2+ + LVDS differential data input (B2-B5, DE, VS, HS) Positive
28 GND Ground
29 Even CLK- - LVDS differential clock input (Even Clock) Negative
30 Even CLK+ + LVDS differential clock input
p ((Even Clock)) Positive

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 14 / 32

 Approval

No. Symbol Function Polarity Remarks

31 GND Ground
32 Even RIN3- - LVDS differential data input (R6-R7, G6-G7, B6-B7) Negative
33 Even RIN3+ + LVDS differential data input (R6-R7, G6-G7, B6-B7) Positive
34 DE_EN DE_EN

.tw
35 BL_EN BL_EN
36 PWM PWM
37 GND Ground
38 VBL VBL
39 VBL VBL

om
40 VBL VBL
d.c
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 15 / 32

 Approval
5. 2 LVDS Interface
5.2.1 LVDS DC Input

ITEM SYMBOL MIN. TYP. MAX. UNIT NOTE

LVDS Differential Voltage Vid 200 200 400 mV
Input Common Mode
VCM 0.4 1.2 1.6 V
Voltage

.tw
5.2.2 LVDS AC Input

om
d.c
ITEM SYMBOL MIN. TYP. MAX. UNIT NOTE

LVDS input clock frequency FCLK_LVDS

CLK LVDS
20 - 100 MHz
slc
100 MHz -200 - 200 ps (1),(2)
RIN skew margin TRSRM
50 MHz -600 - 600 ps (1),(2)

SSC Modulation Rate - - ±3 % (3)

w.y

SSC Modulation Frequency - - 300 KHz (3)

Note (1) : LVDS Receiver Skew (Strobe) Margin

ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 16 / 32

 Approval

Note (2) : Ideal Strove Positions for LVDS Input

.tw
om
d.c
Note (3) : SSC ( Spread Spectrum Clock)
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 17 / 32

 Approval

5.3 Timing Diagrams of LVDS For Transmission

LVDS Receiver : Integrated T-CON (8bit, NS Format)

.tw
om
d.c
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 18 / 32

 Approval
5.4 Input Signals, Basic Display Colors and Gray Scale of Each Color

.tw
om
d.c
slc
w.y
ww

Note 1) Definition of gray :

Rn: Red gray, Gn: Green gray, Bn: Blue gray (n=gray level)
Note 2)Input signal: 0 =Low level voltage, 1=High level voltage
Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 19 / 32

 Approval
5.5 Pixel Format in the display

1 1600

Line 1 R G B R G B R G B R G B

.tw
LTN156KT06 Panel

om
Line 900 R G B R G B
d.c R G B R G B
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 20 / 32

 Approval
6. INTERFACE TIMING

6.1 Timing Parameters

Signal Item Symbol Min

Min. Typ
Typ. Max
Max. Unit Note

Frame Frequency Cycle TV 918 932 944 Lines

.tw
Vertical Active Display
TVD - 900 - Lines
Display Term Period

One Line
Cycle TH 864 896 928 Clocks 2ch
Scanning Time

om
Horizontal Active Display
THD - 800 - Clocks 2ch
Display Term Period

6.2 Timing diagrams of interface signal

d.c
TV

TVD
slc
DE
w.y

TH

DCLK
TC
ww

THD

DE

DATA Valid display data ( 800 clocks)

SIGNALS

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 21 / 32

 Approval
6.3 Power ON/OFF Sequence

: To prevent a latch-up or DC operation of the LCD module, the power on/off sequence
should be as the diagram below.

0.9 VDD 0.9 VDD

0.1 VDD 0.1 VDD
Power Supply VDD
0V
T1
T7 T4

.tw
T2 T3

Signals VALID

0V
T8 T9

om
0.9 LED Vin 0.9 LED Vin
LED Power (Vin) 0.1 LED Vin 0.1 LED Vin
T10 T11

PWM for LED driver

(Dimming signal)
d.c T12 T13

Enable signal for LED driver

(Backlight on/off) T5 T6
slc
Power ON/OFF Sequence
Timing (ms) Remarks

0.5＜T1≤10 VDD rising time from 10% to 90%

Delay
y from VDD to valid data at p
power ON
w.y

0＜T2 ≤50

0＜T3 ≤50 Delay from valid data OFF to VDD OFF at power Off

500 ≤T4 VDD OFF time for Windows restart

200 ≤T5 Delay from valid data to B/L enable at power ON

200 ≤T6 Delay from valid data off to B/L disable at power Off

VDD falling time from 90% to 10%

ww

0＜T7 ≤10

0.5＜T8≤10 LED Vin rising time from 10% to 90%

0.5＜T9≤10 LED Vin falling time from 90% to 10%

0 ≤T10 Delay from LED driver Vin rising time 90% to PWM ON

0≤T11 Delay from PWM Off to LED driver Vin falling time 10%, Must Keep rule

0≤T12 Delay from PWM ON to B/L Enable ON, Must Keep rule

0 ≤T13 Delay from B/L Enable Off to PWM Off

Power Sequence & Timing Parameters

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 22 / 32

7. Mechanical Outline Dimension Approval
Refer to the next page.

.tw
om
d.c
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 23 / 32

‫ډڪکٻڠڧڤڡ‬

‫ڸڠڵڤڮگڰڪڶڎډڋ‪൥‬ڏډڔڐڎ‬
‫ڸکڠګڪٻڧڠڵڠڝڶڄڎڋډڔڏڎڃ‬
‫ڸڜڠڭڜٻڠڱڤگڞڜڶڄڍڎڍډڏڏڎڃ‬
‫ڄڠڧڪڣٻڪگٻڠڧڪڣڃڎډڋ‪൥‬ڎڋډڐڍڎ‬ ‫ڳڜڨړډڎ‬

‫ڄڒډڔڒڌڃ‬ ‫ڐڌډڋ‪൥‬ڐڏډڌڈڏ‬

‫ڄڒډڍڃ‬
‫ڄڒڒډڌڋڌڃ‬
‫‪ww‬‬
‫ڄڎڌډڐڃ‬

‫ڸکڠګڪٻڧڠڵڠڝڶڄڏڍډړڔڌڃ‬
‫ڸڜڠڭڜٻڠڱڤگڞڜڶڄڑڎڐډڎڔڌڃ‬
‫ڸڠڵڤڮگڰڪڶڎډڋ‪൥‬ڐڏډڔڋڍ‬
‫ڄڠڧڪڣٻڪگٻڠڧڪڣڃڎډڋ‪൥‬ڐڋډڑڌڍ‬
‫ڸڠڢکڜڧڡٻڣگڤڲٻڠڵڤڮگڰڪڶڐډڋ‪൥‬ڐڏډڍڍڍ‬
‫ڞ‬

‫ڞ‬ ‫ڮڰ‬

‫ٻڳڳڳڳڳڳڳګڮڰڊڳڳڳڳڳڳڳګڮڰ‬
‫ڄڏڌډڐڃ‬ ‫ڜکڤڣڞٻکڤٻڠڟڜڨ‬
‫‪w.y‬‬
‫کڤګڌپ‬

‫ڳڜڨٻڋډڏ‬

‫ڄڌڐډړڃ‬
‫‪slc‬‬
‫ٽڂڜٽڈٽڜٽٻکڪڤگڞڠڮ‬

‫ڄڒڑډڑڃ‬ ‫ڄڐڌڃ‬
‫‪d.c‬‬
‫ڎډڋ‪൥‬ڒڌډڌڌ‬ ‫ڌډڋ‪൥‬ڑ‬ ‫ڄڐڌڃ‬ ‫ڄڒډڑڃ‬
‫ڞ‬
‫ڞ‬

‫ڌډڋ‪൥‬ڑ‬ ‫ڎډڋ‪൥‬ڍډڌڌ‬

‫ڎډڋ‪൥‬ڍډڎ‬
‫ڍڭ‬

‫ڎډڋ‪൥‬ڍډڎ‬
‫ڎډڋ‬ ‫ڍڭ‬ ‫ڢکڤکڠګڪٻڧڠڵڠڝ‬ ‫ڧڪګٻڡڞ‬
‫ڍډڌڭ‬

‫ڄڔډڑڃ‬
‫ڜ‬ ‫ڝ‬ ‫ڜ‬ ‫ڝ‬
‫ڜڠڭڜٻڠڱڤگڞڜ‬ ‫ڜڠڭڜٻڠڱڤگڞڜ‬

‫ڄڔډڑڃ‬
‫ڄڌډڑڃ‬

‫ڄڌډڑڃ‬
‫ڍډڌڭ‬
‫ڎډڋ‬
‫ڎډڋ‪൥‬ڐڋډڐڎ‬

‫ڍڭ‬
‫ڌڭ‬

‫ڍڭ‬

‫ڍډ‬
‫ڍډ‬

‫ڌڭ‬
‫ڄڐڐډڋڎڃ‬ ‫ڄڔڃ‬
‫‪om‬‬
‫ڎډڋ‪൥‬ڐڋډڐڎ‬
‫ڎډڋ‪൥‬ڍډڎ‬
‫ڎډڋ‪൥‬ڍډڎ‬

‫ڄڔڃ‬ ‫ڄڐڐډڋڎڃ‬
‫ڟ‬
‫ڟ‬

‫ٻٽڜٽٻڲڠڤڱٻڧڤڜگڠڟ‬
‫ڌڕڍٻڠڧڜڞڮٻٻٻ‬
‫ٻٽڝٽٻڲڠڤڱٻڧڤڜگڠڟ‬ ‫ٻٽڞٽٻڲڠڤڱٻڧڤڜگڠڟ‬ ‫ٻٽڟٽٻڲڠڤڱٻڧڤڜگڠڟ‬
‫ڌڕڍٻڠڧڜڞڮٻٻٻ‬ ‫ڌڕڍٻڠڧڜڞڮٻٻٻ‬ ‫ڌڕڍٻڠڧڜڞڮٻٻٻ‬

‫ڭ‬ ‫ڠڞکڜڭڠڧڪگٻڧڜڭڠکڠڢ‬
‫ڠ‬ ‫ګڠگڮ‬ ‫ڌٻڧڠڱڠڧ‬ ‫ڍٻڧڠڱڠڧ‬ ‫ڎٻڧڠڱڠڧ‬
‫گڤکڰ‬ ‫ۈۈ‬ ‫ڴڝٻکڂڜڭڟ‬ ‫ڴڝٻڟڂڮڠڟ‬ ‫ڴڝٻڟڂڦڣڞ‬ ‫ڴڝٻڟڂګګڜ‬
‫ڱ‬
‫ڠڧڜڞڮ‬ ‫ڊ‬
‫ڤ‬ ‫ڠڠڧډکډڥ‬ ‫ڨڤڦډڮډڨ‬
‫ڮ‬
‫ڤ‬ ‫ڪکٻډڞڠګڮ‬
‫ڪ‬
‫ک‬
‫‪.tw‬‬
 8. PACKING Approval
1. CARTON(Internal Package)

(1) Packing Form

Corrugated Cardboard box and Corrupad form as shock absorber

(2) Packing Method

.tw
om
d.c
slc
w.y

Note 1) Total Weight : Approximately 20 kg

2) Acceptance number of piling : 36 sets
ww

3) Carton size : 373(W) * 469(L) * 347(H)

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 25 / 32

 Approval
(3)Packing Material
No Part name Quantity
1 Static electric protective sack 36
Cushion pad(Inner box)
2 1 set
included shock absorber
3 Silicagel (500x1) 1
4 Pictorial marking 2 pcs

.tw
5 Carton 1 set

9. MARKINGS & OTHERS

A nameplate bearing followed by is affixed to a shipped product at the

specified location on each product.

om
(1)Parts number : LTN156KT06
(2)Revision code : 3 letters
(3)Lot number : X X X X XXX XX X 8**
SEC Revision Code
d.c Panel number
Cell ID
Lot ID
Month
Year
Product Code
Line
slc
(4) Nameplate Indication
w.y

LTN156KT06
1132 40 mm

XXXXXXXXXX 8**
ww

USPXXXXXXX/USPXXXXXXX
MADE IN CHINA

80 mm

Parts name : LTN156KT06

Lot number : XXXXXXXXXX
USPXXXXXXX/USPXXXXXXX : USP Related information Num.
I
Inspected
t d workk weekk : 1132(2011
1132(2011year, 32th week)
k)
Product revision Code : 8**

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 26 / 32

 Approval

(5) Packing small box attach

DEVICE : LTN156KT06
TYPE : 8**
QUANTITY : 36 PCS

.tw
CO6040001

om
d.c
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 27 / 32

10. GENERAL PRECAUTIONS Approval

1. Handling

(a) When the module is assembled,

assembled It should be attached to the system firmly
using every mounting holes. Be careful not to twist and bend the modules.

(b) Refrain from strong mechanical shock and / or any force to the module. In addition to
damage, this may cause improper operation or damage to the module and LED back-light.

.tw
(c) Note that polarizers are very fragile and could be easily damaged. Do not press or scratch
the
h surface
f h
harder
d than
h a HB pencilil llead.
d

(d) Wipe off water droplets or oil immediately. If you leave the droplets for a long time,
Staining and discoloration may occur.

om
(e) If the surface of the polarizer is dirty, clean it using some absorbent cotton or soft cloth.

(f) The desirable cleaners are water, IPA (Isoprophyl Alcohol) or Hexane.
Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl
chloride. It might permanent damage to the polarizer due to chemical reaction.
d.c
(g) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or
mouth . In case of contact with hands, legs or clothes, it must be washed away thoroughly
with soap.
slc
(h) Protect the module from static , it may cause damage to the C-MOS Gate Array IC.

(i) Use fingerstalls with soft gloves in order to keep display clean during the incoming
inspection and assembly process.
w.y

(j) Do not disassemble the module

module.

(k) Do not pull or fold the lamp wire.

(l) Do not adjust the variable resistor which is located on the back side.

(m) Protection film for polarizer on the module shall be slowly peeled off just before use so
ww

th t the
that th electrostatic
l t t ti charge
h can be
b minimized.
i i i d

(n) Pins of I/F connector shall not be touched directly with bare hands.

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 28 / 32

2. STORAGE Approval
We highly recommend to comply with the criteria in the table below.

.tw
om
d.c
3. OPERATION
slc
(a) Do not connect,disconnect the module in the “ Power On” condition.

(b) Power supply should always be turned on/off by following item 6.3
“ Power on/off sequence “.
w.y

(c) Module has high frequency circuits. Sufficient suppression to the electromagnetic
interference shall be done by system manufacturers. Grounding and shielding methods
may be important to minimize the interference.

(d) The standard limited warranty is only applicable when the module is used for general
notebook applications. If used for purposes other than as specified, SEC is not to be
ww

h ld reliable
held li bl for
f the
th defective
d f ti operations.
ti It iis strongly
t l recommended
d d tto contact
t t SEC
to find out fitness for a particular purpose.

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 29 / 32

 Approval
4. OTHERS
(a) Ultra-violet ray filter is necessary for outdoor operation.

(b) Avoid condensation of water

water. It may result in improper operation or disconnection
of electrode.

(c) Do not exceed the absolute maximum rating value. ( the supply voltage variation, input
voltage variation, variation in part contents and environmental temperature, so on)

.tw
Otherwise the module may be damaged.

(d) If the module displays the same pattern continuously for a long period of time
time,it
it can be
the situation when the image “sticks” to the screen.

(e) This module has its circuitry PCB’s on the rear side and should be handled carefully in

om
order not to be stressed.

d.c
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 30 / 32

 11. EDID Approval

.tw
om
d.c
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 31 / 32

 Approval

.tw
om
d.c
slc
w.y
ww

Samsung Secret

Doc.No. LTN156KT06-8 Rev.No 00-A01-G-110927 Page 32 / 32